June 2019 - Linux-stable-mirror

[PATCH] KVM: VMX: Raise #GP when guest read/write forbidden IA32_XSS

by Wanpeng Li

From: Wanpeng Li <wanpengli(a)tencent.com> Raise #GP when guest read/write forbidden IA32_XSS. Fixes: 203000993de5 (kvm: vmx: add MSR logic for XSAVES) Reported-by: Xiaoyao Li <xiaoyao.li(a)linux.intel.com> Reported-by: Tao Xu <tao3.xu(a)intel.com> Cc: Cc: Paolo Bonzini <pbonzini(a)redhat.com> Cc: Radim Krčmář <rkrcmar(a)redhat.com> Cc: stable(a)vger.kernel.org Signed-off-by: Wanpeng Li <wanpengli(a)tencent.com> --- arch/x86/kvm/vmx/vmx.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c index b939a68..d174b62 100644 --- a/arch/x86/kvm/vmx/vmx.c +++ b/arch/x86/kvm/vmx/vmx.c @@ -1732,7 +1732,10 @@ static int vmx_get_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info) return vmx_get_vmx_msr(&vmx->nested.msrs, msr_info->index, &msr_info->data); case MSR_IA32_XSS: - if (!vmx_xsaves_supported()) + if (!vmx_xsaves_supported() || + (!msr_info->host_initiated && + !(guest_cpuid_has(vcpu, X86_FEATURE_XSAVE) && + guest_cpuid_has(vcpu, X86_FEATURE_XSAVES)))) return 1; msr_info->data = vcpu->arch.ia32_xss; break; @@ -1962,7 +1965,10 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info) return 1; return vmx_set_vmx_msr(vcpu, msr_index, data); case MSR_IA32_XSS: - if (!vmx_xsaves_supported()) + if (!vmx_xsaves_supported() || + (!msr_info->host_initiated && + !(guest_cpuid_has(vcpu, X86_FEATURE_XSAVE) && + guest_cpuid_has(vcpu, X86_FEATURE_XSAVES)))) return 1; /* * The only supported bit as of Skylake is bit 8, but -- 2.7.4

5 years, 11 months

2
1
0 0

[PATCH 3/3] arm64: tegra: Fix Jetson Nano GPU regulator

by Jon Hunter

There are a few issues with the GPU regulator defined for Jetson Nano which are: 1. The GPU regulator is a PWM based regulator and not a fixed voltage regulator. 2. The output voltages for the GPU regulator are not correct. 3. The regulator enable ramp delay is too short for the regulator and needs to be increased. 2ms should be sufficient. 4. This is the same regulator used on Jetson TX1 and so make the ramp delay and settling time the same as Jetson TX1. Cc: stable(a)vger.kernel.org Signed-off-by: Jon Hunter <jonathanh(a)nvidia.com> --- .../boot/dts/nvidia/tegra210-p3450-0000.dts | 21 +++++++++++-------- 1 file changed, 12 insertions(+), 9 deletions(-) diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts index 63df72eecf21..9d17ec707bce 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra210-p3450-0000.dts @@ -88,6 +88,10 @@ status = "okay"; }; + pwm@7000a000 { + status = "okay"; + }; + i2c@7000c500 { status = "okay"; clock-frequency = <100000>; @@ -664,17 +668,16 @@ }; vdd_gpu: regulator@6 { - compatible = "regulator-fixed"; + compatible = "pwm-regulator"; reg = <6>; - + pwms = <&pwm 1 4880>; regulator-name = "VDD_GPU"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-enable-ramp-delay = <250>; - - gpio = <&pmic 6 GPIO_ACTIVE_HIGH>; - enable-active-high; - + regulator-min-microvolt = <710000>; + regulator-max-microvolt = <1320000>; + regulator-ramp-delay = <80>; + regulator-enable-ramp-delay = <2000>; + regulator-settling-time-us = <160>; + enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>; vin-supply = <&vdd_5v0_sys>; }; }; -- 2.17.1

5 years, 11 months

2
1
0 0

[PATCH 2/3] arm64: tegra: Update Jetson TX1 GPU regulator timings

by Jon Hunter

The GPU regulator enable ramp delay for Jetson TX1 is set to 1ms which not sufficient because the enable ramp delay has been measured to be greater than 1ms. Furthermore, the downstream kernels released by NVIDIA for Jetson TX1 are using a enable ramp delay 2ms and a settling delay of 160us. Update the GPU regulator enable ramp delay for Jetson TX1 to be 2ms and add a settling delay of 160us. Cc: stable(a)vger.kernel.org Signed-off-by: Jon Hunter <jonathanh(a)nvidia.com> --- arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi index e8654061ce03..27723829d033 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210-p2180.dtsi @@ -341,7 +341,8 @@ regulator-max-microvolt = <1320000>; enable-gpios = <&pmic 6 GPIO_ACTIVE_HIGH>; regulator-ramp-delay = <80>; - regulator-enable-ramp-delay = <1000>; + regulator-enable-ramp-delay = <2000>; + regulator-settling-time-us = <160>; }; }; }; -- 2.17.1

5 years, 11 months

2
1
0 0

[PATCH 1/3] arm64: tegra: Fix AGIC register range

by Jon Hunter

The Tegra AGIC interrupt controller is an ARM GIC400 interrupt controller. Per the ARM GIC device-tree binding, the first address region is for the GIC distributor registers and the second address region is for the GIC CPU interface registers. The address space for the distributor registers is 4kB, but currently this is incorrectly defined as 8kB for the Tegra AGIC and overlaps with the CPU interface registers. Correct the address space for the distributor to be 4kB. Cc: stable(a)vger.kernel.org Signed-off-by: Jon Hunter <jonathanh(a)nvidia.com> --- arch/arm64/boot/dts/nvidia/tegra210.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index edf27fe2f10e..ec762b3455b4 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -1258,7 +1258,7 @@ compatible = "nvidia,tegra210-agic"; #interrupt-cells = <3>; interrupt-controller; - reg = <0x702f9000 0x2000>, + reg = <0x702f9000 0x1000>, <0x702fa000 0x2000>; interrupts = <GIC_SPI 102 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&tegra_car TEGRA210_CLK_APE>; -- 2.17.1

5 years, 11 months

2
1
0 0

[PATCH AUTOSEL 5.1 01/70] iio: adc: ads124: avoid buffer overflow

by Sasha Levin

From: Vincent Stehlé <vincent.stehle(a)laposte.net> [ Upstream commit 0db8aa49a97e7f40852a64fd35abcc1292a7c365 ] When initializing the priv->data array starting from index 1, there is one less element to consider than when initializing the full array. Fixes: e717f8c6dfec8f76 ("iio: adc: Add the TI ads124s08 ADC code") Signed-off-by: Vincent Stehlé <vincent.stehle(a)laposte.net> Reviewed-by: Mukesh Ojha <mojha(a)codeaurora.org> Reviewed-by: Dan Murphy <dmurphy(a)ti.com> Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- drivers/iio/adc/ti-ads124s08.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/adc/ti-ads124s08.c b/drivers/iio/adc/ti-ads124s08.c index 53f17e4f2f23..552c2be8d87a 100644 --- a/drivers/iio/adc/ti-ads124s08.c +++ b/drivers/iio/adc/ti-ads124s08.c @@ -202,7 +202,7 @@ static int ads124s_read(struct iio_dev *indio_dev, unsigned int chan) }; priv->data[0] = ADS124S08_CMD_RDATA; - memset(&priv->data[1], ADS124S08_CMD_NOP, sizeof(priv->data)); + memset(&priv->data[1], ADS124S08_CMD_NOP, sizeof(priv->data) - 1); ret = spi_sync_transfer(priv->spi, t, ARRAY_SIZE(t)); if (ret < 0) -- 2.20.1

5 years, 11 months

2
72
0 0

✅ PASS: Stable queue: queue-5.1

by CKI Project

Hello, We ran automated tests on a patchset that was proposed for merging into this kernel tree. The patches were applied to: Kernel repo: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git Commit: 5752b50477da - Linux 5.1.12 The results of these automated tests are provided below. Overall result: PASSED Merge: OK Compile: OK Tests: OK Please reply to this email if you have any questions about the tests that we ran or if you have any suggestions on how to make future tests more effective. ,-. ,-. ( C ) ( K ) Continuous `-',-.`-' Kernel ( I ) Integration `-' ______________________________________________________________________________ Merge testing ------------- We cloned this repository and checked out the following commit: Repo: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git Commit: 5752b50477da - Linux 5.1.12 We then merged the patchset with `git am`: netfilter-nat-fix-udp-checksum-corruption.patch ax25-fix-inconsistent-lock-state-in-ax25_destroy_timer.patch be2net-fix-number-of-rx-queues-used-for-flow-hashing.patch hv_netvsc-set-probe-mode-to-sync.patch ipv6-flowlabel-fl6_sock_lookup-must-use-atomic_inc_not_zero.patch lapb-fixed-leak-of-control-blocks.patch neigh-fix-use-after-free-read-in-pneigh_get_next.patch net-dsa-rtl8366-fix-up-vlan-filtering.patch net-openvswitch-do-not-free-vport-if-register_netdevice-is-failed.patch net-phylink-set-the-autoneg-state-in-phylink_phy_change.patch net-tls-correctly-account-for-copied-bytes-with-multiple-sk_msgs.patch nfc-ensure-presence-of-required-attributes-in-the-deactivate_target-handler.patch sctp-free-cookie-before-we-memdup-a-new-one.patch sunhv-fix-device-naming-inconsistency-between-sunhv_console-and-sunhv_reg.patch tipc-purge-deferredq-list-for-each-grp-member-in-tipc_group_delete.patch vsock-virtio-set-sock_done-on-peer-shutdown.patch net-mlx5-avoid-reloading-already-removed-devices.patch vxlan-don-t-assume-linear-buffers-in-error-handler.patch geneve-don-t-assume-linear-buffers-in-error-handler.patch net-mvpp2-prs-fix-parser-range-for-vid-filtering.patch net-mvpp2-prs-use-the-correct-helpers-when-removing-all-vid-filters.patch net-dsa-microchip-don-t-try-to-read-stats-for-unused-ports.patch net-ethtool-allow-matching-on-vlan-dei-bit.patch net-mlx5-update-pci-error-handler-entries-and-command-translation.patch mlxsw-spectrum_router-refresh-nexthop-neighbour-when-it-becomes-dead.patch net-mlx5e-add-ndo_set_feature-for-uplink-representor.patch mlxsw-spectrum_flower-fix-tos-matching.patch net-mlx5e-fix-source-port-matching-in-fdb-peer-flow-rule.patch mlxsw-spectrum_buffers-reduce-pool-size-on-spectrum-2.patch net-mlx5e-support-tagged-tunnel-over-bond.patch net-correct-udp-zerocopy-refcnt-also-when-zerocopy-only-on-append.patch net-mlx5e-avoid-detaching-non-existing-netdev-under-switchdev-mode.patch iio-imu-mpu6050-fix-fifo-layout-for-icm20602.patch staging-erofs-set-sb-s_root-to-null-when-failing-fro.patch staging-vc04_services-fix-a-couple-error-codes.patch staging-wilc1000-fix-some-double-unlock-bugs-in-wilc.patch pinctrl-intel-clear-interrupt-status-in-mask-unmask-.patch netfilter-nf_tables-fix-oops-during-rule-dump.patch perf-x86-intel-ds-fix-event-vs.-uevent-pebs-constrai.patch netfilter-nf_queue-fix-reinject-verdict-handling.patch netfilter-nft_fib-fix-existence-check-support.patch ipvs-fix-use-after-free-in-ip_vs_in.patch selftests-netfilter-missing-error-check-when-setting.patch clk-ti-clkctrl-fix-clkdm_clk-handling.patch powerpc-powernv-return-for-invalid-imc-domain.patch usb-xhci-fix-a-potential-null-pointer-dereference-in.patch misdn-make-sure-device-name-is-nul-terminated.patch x86-cpu-amd-don-t-force-the-cpb-cap-when-running-und.patch perf-ring_buffer-fix-exposing-a-temporarily-decrease.patch perf-ring_buffer-add-ordering-to-rb-nest-increment.patch perf-ring-buffer-always-use-read-write-_once-for-rb-.patch gpio-fix-gpio-adp5588-build-errors.patch net-stmmac-update-rx-tail-pointer-register-to-fix-rx.patch net-stmmac-fix-csr_clk-can-t-be-zero-issue.patch net-stmmac-dwmac-mediatek-modify-csr_clk-value-to-fi.patch io_uring-fix-__io_uring_register-false-success.patch dpaa2-eth-fix-potential-spectre-issue.patch dpaa2-eth-use-ptr_err_or_zero-where-appropriate.patch net-tulip-de4x5-drop-redundant-module_device_table.patch acpi-pci-pm-add-missing-wakeup.flags.valid-checks.patch loop-don-t-change-loop-device-under-exclusive-opener.patch drm-etnaviv-lock-mmu-while-dumping-core.patch net-aquantia-tx-clean-budget-logic-error.patch net-aquantia-fix-lro-with-fcs-error.patch i2c-dev-fix-potential-memory-leak-in-i2cdev_ioctl_rd.patch alsa-hda-force-polling-mode-on-cnl-for-fixing-codec-.patch configfs-fix-use-after-free-when-accessing-sd-s_dent.patch perf-data-fix-strncat-may-truncate-build-failure-wit.patch s390-zcrypt-fix-wrong-dispatching-for-control-domain.patch perf-namespace-protect-reading-thread-s-namespace.patch perf-record-fix-s390-missing-module-symbol-and-warni.patch ia64-fix-build-errors-by-exporting-paddr_to_nid.patch dpaa_eth-use-only-online-cpu-portals.patch xen-pvcalls-remove-set-but-not-used-variable.patch xenbus-avoid-deadlock-during-suspend-due-to-open-tra.patch dfs_cache-fix-a-wrong-use-of-kfree-in-flush_cache_en.patch kvm-ppc-book3s-hv-use-new-mutex-to-synchronize-mmu-s.patch kvm-ppc-book3s-use-new-mutex-to-synchronize-access-t.patch kvm-ppc-book3s-hv-don-t-take-kvm-lock-around-kvm_for.patch alsa-fireface-use-ull-suffixes-for-64-bit-constants.patch arm64-fix-syscall_fn_t-type.patch arm64-use-the-correct-function-type-in-syscall_defin.patch arm64-use-the-correct-function-type-for-__arm64_sys_.patch net-sh_eth-fix-mdio-access-in-sh_eth_close-for-r-car.patch blk-mq-fix-memory-leak-in-error-handling.patch net-phylink-ensure-consistent-phy-interface-mode.patch net-phy-dp83867-fix-speed-10-in-sgmii-mode.patch net-phy-dp83867-increase-sgmii-autoneg-timer-duratio.patch net-phy-dp83867-set-up-rgmii-tx-delay.patch scsi-libcxgbi-add-a-check-for-null-pointer-in-cxgbi_.patch scsi-smartpqi-properly-set-both-the-dma-mask-and-the.patch scsi-scsi_dh_alua-fix-possible-null-ptr-deref.patch scsi-libsas-delete-sas-port-if-expander-discover-fai.patch mlxsw-spectrum-prevent-force-of-56g.patch ocfs2-fix-error-path-kobject-memory-leak.patch Compile testing --------------- We compiled the kernel for 4 architectures: aarch64: build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg configuration: https://artifacts.cki-project.org/builds/aarch64/kernel-stable_queue_5.1-aa… kernel build: https://artifacts.cki-project.org/builds/aarch64/kernel-stable_queue_5.1-aa… ppc64le: build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg configuration: https://artifacts.cki-project.org/builds/ppc64le/kernel-stable_queue_5.1-pp… kernel build: https://artifacts.cki-project.org/builds/ppc64le/kernel-stable_queue_5.1-pp… s390x: build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg configuration: https://artifacts.cki-project.org/builds/s390x/kernel-stable_queue_5.1-s390… kernel build: https://artifacts.cki-project.org/builds/s390x/kernel-stable_queue_5.1-s390… x86_64: build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg configuration: https://artifacts.cki-project.org/builds/x86_64/kernel-stable_queue_5.1-x86… kernel build: https://artifacts.cki-project.org/builds/x86_64/kernel-stable_queue_5.1-x86… Hardware testing ---------------- We booted each kernel and ran the following tests: aarch64: Host 1: ✅ Boot test [0] ✅ xfstests: xfs [1] ✅ selinux-policy: serge-testsuite [2] Host 2: ✅ Boot test [0] ✅ LTP lite [3] ✅ Loopdev Sanity [4] ✅ AMTU (Abstract Machine Test Utility) [5] ✅ LTP: openposix test suite [6] ✅ Ethernet drivers sanity [7] ✅ audit: audit testsuite test [8] ✅ httpd: mod_ssl smoke sanity [9] ✅ iotop: sanity [10] ✅ Usex - version 1.9-29 [11] ✅ lvm thinp sanity [12] 🚧 ✅ Networking socket: fuzz [13] 🚧 ✅ Networking sctp-auth: sockopts test [14] 🚧 ✅ Networking route_func: local [15] 🚧 ✅ Networking route_func: forward [15] 🚧 ✅ Networking tunnel: vxlan basic [16] 🚧 ✅ Networking tunnel: geneve basic test [17] 🚧 ✅ tuned: tune-processes-through-perf [18] 🚧 ✅ storage: SCSI VPD [19] 🚧 ✅ storage: software RAID testing [20] ppc64le: Host 1: ✅ Boot test [0] ✅ xfstests: xfs [1] ✅ selinux-policy: serge-testsuite [2] Host 2: ✅ Boot test [0] ✅ LTP lite [3] ✅ Loopdev Sanity [4] ✅ AMTU (Abstract Machine Test Utility) [5] ✅ LTP: openposix test suite [6] ✅ Ethernet drivers sanity [7] ✅ audit: audit testsuite test [8] ✅ httpd: mod_ssl smoke sanity [9] ✅ iotop: sanity [10] ✅ Usex - version 1.9-29 [11] ✅ lvm thinp sanity [12] 🚧 ✅ Networking socket: fuzz [13] 🚧 ✅ Networking sctp-auth: sockopts test [14] 🚧 ✅ Networking route_func: local [15] 🚧 ✅ Networking route_func: forward [15] 🚧 ✅ Networking tunnel: vxlan basic [16] 🚧 ✅ Networking tunnel: geneve basic test [17] 🚧 ✅ tuned: tune-processes-through-perf [18] 🚧 ✅ storage: software RAID testing [20] s390x: Host 1: ✅ Boot test [0] ✅ selinux-policy: serge-testsuite [2] Host 2: ✅ Boot test [0] ✅ LTP lite [3] ✅ Loopdev Sanity [4] ✅ LTP: openposix test suite [6] ✅ Ethernet drivers sanity [7] ✅ audit: audit testsuite test [8] ✅ httpd: mod_ssl smoke sanity [9] ✅ iotop: sanity [10] ✅ lvm thinp sanity [12] 🚧 ✅ Networking socket: fuzz [13] 🚧 ✅ Networking sctp-auth: sockopts test [14] 🚧 ✅ Networking route_func: local [15] 🚧 ✅ Networking route_func: forward [15] 🚧 ✅ Networking tunnel: vxlan basic [16] 🚧 ✅ Networking tunnel: geneve basic test [17] 🚧 ✅ tuned: tune-processes-through-perf [18] 🚧 ✅ storage: software RAID testing [20] x86_64: Host 1: ✅ Boot test [0] ✅ LTP lite [3] ✅ Loopdev Sanity [4] ✅ AMTU (Abstract Machine Test Utility) [5] ✅ LTP: openposix test suite [6] ✅ Ethernet drivers sanity [7] ✅ audit: audit testsuite test [8] ✅ httpd: mod_ssl smoke sanity [9] ✅ iotop: sanity [10] ✅ Usex - version 1.9-29 [11] ✅ lvm thinp sanity [12] 🚧 ✅ Networking socket: fuzz [13] 🚧 ✅ Networking sctp-auth: sockopts test [14] 🚧 ✅ Networking route_func: local [15] 🚧 ✅ Networking route_func: forward [15] 🚧 ✅ Networking tunnel: vxlan basic [16] 🚧 ✅ Networking tunnel: geneve basic test [17] 🚧 ✅ tuned: tune-processes-through-perf [18] 🚧 ✅ storage: SCSI VPD [19] 🚧 ✅ storage: software RAID testing [20] Host 2: ✅ Boot test [0] ✅ xfstests: xfs [1] ✅ selinux-policy: serge-testsuite [2] Test source: 💚 Pull requests are welcome for new tests or improvements to existing tests! [0]: https://github.com/CKI-project/tests-beaker/archive/master.zip#distribution… [1]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/filesystems… [2]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/packages/se… [3]: https://github.com/CKI-project/tests-beaker/archive/master.zip#distribution… [4]: https://github.com/CKI-project/tests-beaker/archive/master.zip#filesystems/… [5]: https://github.com/CKI-project/tests-beaker/archive/master.zip#misc/amtu [6]: https://github.com/CKI-project/tests-beaker/archive/master.zip#distribution… [7]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/… [8]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/aud… [9]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/htt… [10]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/iot… [11]: https://github.com/CKI-project/tests-beaker/archive/master.zip#standards/us… [12]: https://github.com/CKI-project/tests-beaker/archive/master.zip#storage/lvm/… [13]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/… [14]: https://github.com/CKI-project/tests-beaker/archive/master.zip#networking/s… [15]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/… [16]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/… [17]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/… [18]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/tun… [19]: https://github.com/CKI-project/tests-beaker/archive/master.zip#storage/scsi… [20]: https://github.com/CKI-project/tests-beaker/archive/master.zip#storage/swra… Waived tests (marked with 🚧) ----------------------------- This test run included waived tests. Such tests are executed but their results are not taken into account. Tests are waived when their results are not reliable enough, e.g. when they're just introduced or are being fixed.

5 years, 11 months

1
0
0 0

✅ PASS: Stable queue: queue-5.1

by CKI Project

Hello, We ran automated tests on a patchset that was proposed for merging into this kernel tree. The patches were applied to: Kernel repo: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git Commit: 5752b50477da - Linux 5.1.12 The results of these automated tests are provided below. Overall result: PASSED Merge: OK Compile: OK Tests: OK Please reply to this email if you have any questions about the tests that we ran or if you have any suggestions on how to make future tests more effective. ,-. ,-. ( C ) ( K ) Continuous `-',-.`-' Kernel ( I ) Integration `-' ______________________________________________________________________________ Merge testing ------------- We cloned this repository and checked out the following commit: Repo: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git Commit: 5752b50477da - Linux 5.1.12 We then merged the patchset with `git am`: netfilter-nat-fix-udp-checksum-corruption.patch ax25-fix-inconsistent-lock-state-in-ax25_destroy_timer.patch be2net-fix-number-of-rx-queues-used-for-flow-hashing.patch hv_netvsc-set-probe-mode-to-sync.patch ipv6-flowlabel-fl6_sock_lookup-must-use-atomic_inc_not_zero.patch lapb-fixed-leak-of-control-blocks.patch neigh-fix-use-after-free-read-in-pneigh_get_next.patch net-dsa-rtl8366-fix-up-vlan-filtering.patch net-openvswitch-do-not-free-vport-if-register_netdevice-is-failed.patch net-phylink-set-the-autoneg-state-in-phylink_phy_change.patch net-tls-correctly-account-for-copied-bytes-with-multiple-sk_msgs.patch nfc-ensure-presence-of-required-attributes-in-the-deactivate_target-handler.patch sctp-free-cookie-before-we-memdup-a-new-one.patch sunhv-fix-device-naming-inconsistency-between-sunhv_console-and-sunhv_reg.patch tipc-purge-deferredq-list-for-each-grp-member-in-tipc_group_delete.patch vsock-virtio-set-sock_done-on-peer-shutdown.patch net-mlx5-avoid-reloading-already-removed-devices.patch vxlan-don-t-assume-linear-buffers-in-error-handler.patch geneve-don-t-assume-linear-buffers-in-error-handler.patch net-mvpp2-prs-fix-parser-range-for-vid-filtering.patch net-mvpp2-prs-use-the-correct-helpers-when-removing-all-vid-filters.patch net-dsa-microchip-don-t-try-to-read-stats-for-unused-ports.patch net-ethtool-allow-matching-on-vlan-dei-bit.patch net-mlx5-update-pci-error-handler-entries-and-command-translation.patch mlxsw-spectrum_router-refresh-nexthop-neighbour-when-it-becomes-dead.patch net-mlx5e-add-ndo_set_feature-for-uplink-representor.patch mlxsw-spectrum_flower-fix-tos-matching.patch net-mlx5e-fix-source-port-matching-in-fdb-peer-flow-rule.patch mlxsw-spectrum_buffers-reduce-pool-size-on-spectrum-2.patch net-mlx5e-support-tagged-tunnel-over-bond.patch net-correct-udp-zerocopy-refcnt-also-when-zerocopy-only-on-append.patch net-mlx5e-avoid-detaching-non-existing-netdev-under-switchdev-mode.patch iio-imu-mpu6050-fix-fifo-layout-for-icm20602.patch staging-erofs-set-sb-s_root-to-null-when-failing-fro.patch staging-vc04_services-fix-a-couple-error-codes.patch staging-wilc1000-fix-some-double-unlock-bugs-in-wilc.patch pinctrl-intel-clear-interrupt-status-in-mask-unmask-.patch netfilter-nf_tables-fix-oops-during-rule-dump.patch perf-x86-intel-ds-fix-event-vs.-uevent-pebs-constrai.patch netfilter-nf_queue-fix-reinject-verdict-handling.patch netfilter-nft_fib-fix-existence-check-support.patch ipvs-fix-use-after-free-in-ip_vs_in.patch selftests-netfilter-missing-error-check-when-setting.patch clk-ti-clkctrl-fix-clkdm_clk-handling.patch powerpc-powernv-return-for-invalid-imc-domain.patch usb-xhci-fix-a-potential-null-pointer-dereference-in.patch misdn-make-sure-device-name-is-nul-terminated.patch x86-cpu-amd-don-t-force-the-cpb-cap-when-running-und.patch perf-ring_buffer-fix-exposing-a-temporarily-decrease.patch perf-ring_buffer-add-ordering-to-rb-nest-increment.patch perf-ring-buffer-always-use-read-write-_once-for-rb-.patch gpio-fix-gpio-adp5588-build-errors.patch net-stmmac-update-rx-tail-pointer-register-to-fix-rx.patch net-stmmac-fix-csr_clk-can-t-be-zero-issue.patch net-stmmac-dwmac-mediatek-modify-csr_clk-value-to-fi.patch io_uring-fix-__io_uring_register-false-success.patch dpaa2-eth-fix-potential-spectre-issue.patch dpaa2-eth-use-ptr_err_or_zero-where-appropriate.patch net-tulip-de4x5-drop-redundant-module_device_table.patch acpi-pci-pm-add-missing-wakeup.flags.valid-checks.patch loop-don-t-change-loop-device-under-exclusive-opener.patch drm-etnaviv-lock-mmu-while-dumping-core.patch net-aquantia-tx-clean-budget-logic-error.patch net-aquantia-fix-lro-with-fcs-error.patch i2c-dev-fix-potential-memory-leak-in-i2cdev_ioctl_rd.patch alsa-hda-force-polling-mode-on-cnl-for-fixing-codec-.patch configfs-fix-use-after-free-when-accessing-sd-s_dent.patch perf-data-fix-strncat-may-truncate-build-failure-wit.patch s390-zcrypt-fix-wrong-dispatching-for-control-domain.patch perf-namespace-protect-reading-thread-s-namespace.patch perf-record-fix-s390-missing-module-symbol-and-warni.patch ia64-fix-build-errors-by-exporting-paddr_to_nid.patch dpaa_eth-use-only-online-cpu-portals.patch xen-pvcalls-remove-set-but-not-used-variable.patch xenbus-avoid-deadlock-during-suspend-due-to-open-tra.patch dfs_cache-fix-a-wrong-use-of-kfree-in-flush_cache_en.patch kvm-ppc-book3s-hv-use-new-mutex-to-synchronize-mmu-s.patch kvm-ppc-book3s-use-new-mutex-to-synchronize-access-t.patch kvm-ppc-book3s-hv-don-t-take-kvm-lock-around-kvm_for.patch alsa-fireface-use-ull-suffixes-for-64-bit-constants.patch arm64-fix-syscall_fn_t-type.patch arm64-use-the-correct-function-type-in-syscall_defin.patch arm64-use-the-correct-function-type-for-__arm64_sys_.patch net-sh_eth-fix-mdio-access-in-sh_eth_close-for-r-car.patch blk-mq-fix-memory-leak-in-error-handling.patch net-phylink-ensure-consistent-phy-interface-mode.patch net-phy-dp83867-fix-speed-10-in-sgmii-mode.patch net-phy-dp83867-increase-sgmii-autoneg-timer-duratio.patch net-phy-dp83867-set-up-rgmii-tx-delay.patch scsi-libcxgbi-add-a-check-for-null-pointer-in-cxgbi_.patch scsi-smartpqi-properly-set-both-the-dma-mask-and-the.patch scsi-scsi_dh_alua-fix-possible-null-ptr-deref.patch scsi-libsas-delete-sas-port-if-expander-discover-fai.patch mlxsw-spectrum-prevent-force-of-56g.patch ocfs2-fix-error-path-kobject-memory-leak.patch Compile testing --------------- We compiled the kernel for 4 architectures: aarch64: build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg configuration: https://artifacts.cki-project.org/builds/aarch64/kernel-stable_queue_5.1-aa… kernel build: https://artifacts.cki-project.org/builds/aarch64/kernel-stable_queue_5.1-aa… ppc64le: build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg configuration: https://artifacts.cki-project.org/builds/ppc64le/kernel-stable_queue_5.1-pp… kernel build: https://artifacts.cki-project.org/builds/ppc64le/kernel-stable_queue_5.1-pp… s390x: build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg configuration: https://artifacts.cki-project.org/builds/s390x/kernel-stable_queue_5.1-s390… kernel build: https://artifacts.cki-project.org/builds/s390x/kernel-stable_queue_5.1-s390… x86_64: build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg configuration: https://artifacts.cki-project.org/builds/x86_64/kernel-stable_queue_5.1-x86… kernel build: https://artifacts.cki-project.org/builds/x86_64/kernel-stable_queue_5.1-x86… Hardware testing ---------------- We booted each kernel and ran the following tests: aarch64: Host 1: ✅ Boot test [0] ✅ LTP lite [1] ✅ Loopdev Sanity [2] ✅ AMTU (Abstract Machine Test Utility) [3] ✅ LTP: openposix test suite [4] ✅ Ethernet drivers sanity [5] ✅ audit: audit testsuite test [6] ✅ httpd: mod_ssl smoke sanity [7] ✅ iotop: sanity [8] ✅ Usex - version 1.9-29 [9] ✅ lvm thinp sanity [10] 🚧 ✅ Networking socket: fuzz [11] 🚧 ✅ Networking sctp-auth: sockopts test [12] 🚧 ✅ Networking route_func: local [13] 🚧 ✅ Networking route_func: forward [13] 🚧 ✅ Networking tunnel: vxlan basic [14] 🚧 ✅ Networking tunnel: geneve basic test [15] 🚧 ✅ tuned: tune-processes-through-perf [16] 🚧 ✅ storage: SCSI VPD [17] 🚧 ✅ storage: software RAID testing [18] Host 2: ✅ Boot test [0] ✅ xfstests: xfs [19] ✅ selinux-policy: serge-testsuite [20] ppc64le: Host 1: ✅ Boot test [0] ✅ LTP lite [1] ✅ Loopdev Sanity [2] ✅ AMTU (Abstract Machine Test Utility) [3] ✅ LTP: openposix test suite [4] ✅ Ethernet drivers sanity [5] ✅ audit: audit testsuite test [6] ✅ httpd: mod_ssl smoke sanity [7] ✅ iotop: sanity [8] ✅ Usex - version 1.9-29 [9] ✅ lvm thinp sanity [10] 🚧 ✅ Networking socket: fuzz [11] 🚧 ✅ Networking sctp-auth: sockopts test [12] 🚧 ✅ Networking route_func: local [13] 🚧 ✅ Networking route_func: forward [13] 🚧 ✅ Networking tunnel: vxlan basic [14] 🚧 ✅ Networking tunnel: geneve basic test [15] 🚧 ✅ tuned: tune-processes-through-perf [16] 🚧 ✅ storage: software RAID testing [18] Host 2: ✅ Boot test [0] ✅ xfstests: xfs [19] ✅ selinux-policy: serge-testsuite [20] s390x: Host 1: ✅ Boot test [0] ✅ LTP lite [1] ✅ Loopdev Sanity [2] ✅ LTP: openposix test suite [4] ✅ Ethernet drivers sanity [5] ✅ audit: audit testsuite test [6] ✅ httpd: mod_ssl smoke sanity [7] ✅ iotop: sanity [8] ✅ lvm thinp sanity [10] 🚧 ✅ Networking socket: fuzz [11] 🚧 ✅ Networking sctp-auth: sockopts test [12] 🚧 ✅ Networking route_func: local [13] 🚧 ✅ Networking route_func: forward [13] 🚧 ✅ Networking tunnel: vxlan basic [14] 🚧 ✅ Networking tunnel: geneve basic test [15] 🚧 ✅ tuned: tune-processes-through-perf [16] 🚧 ✅ storage: software RAID testing [18] Host 2: ✅ Boot test [0] ✅ selinux-policy: serge-testsuite [20] x86_64: Host 1: ✅ Boot test [0] ✅ LTP lite [1] ✅ Loopdev Sanity [2] ✅ AMTU (Abstract Machine Test Utility) [3] ✅ LTP: openposix test suite [4] ✅ Ethernet drivers sanity [5] ✅ audit: audit testsuite test [6] ✅ httpd: mod_ssl smoke sanity [7] ✅ iotop: sanity [8] ✅ Usex - version 1.9-29 [9] ✅ lvm thinp sanity [10] 🚧 ✅ Networking socket: fuzz [11] 🚧 ✅ Networking sctp-auth: sockopts test [12] 🚧 ✅ Networking route_func: local [13] 🚧 ✅ Networking route_func: forward [13] 🚧 ✅ Networking tunnel: vxlan basic [14] 🚧 ✅ Networking tunnel: geneve basic test [15] 🚧 ✅ tuned: tune-processes-through-perf [16] 🚧 ✅ storage: SCSI VPD [17] 🚧 ✅ storage: software RAID testing [18] Host 2: ✅ Boot test [0] ✅ xfstests: xfs [19] ✅ selinux-policy: serge-testsuite [20] Test source: 💚 Pull requests are welcome for new tests or improvements to existing tests! [0]: https://github.com/CKI-project/tests-beaker/archive/master.zip#distribution… [1]: https://github.com/CKI-project/tests-beaker/archive/master.zip#distribution… [2]: https://github.com/CKI-project/tests-beaker/archive/master.zip#filesystems/… [3]: https://github.com/CKI-project/tests-beaker/archive/master.zip#misc/amtu [4]: https://github.com/CKI-project/tests-beaker/archive/master.zip#distribution… [5]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/… [6]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/aud… [7]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/htt… [8]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/iot… [9]: https://github.com/CKI-project/tests-beaker/archive/master.zip#standards/us… [10]: https://github.com/CKI-project/tests-beaker/archive/master.zip#storage/lvm/… [11]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/… [12]: https://github.com/CKI-project/tests-beaker/archive/master.zip#networking/s… [13]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/… [14]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/… [15]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/… [16]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/tun… [17]: https://github.com/CKI-project/tests-beaker/archive/master.zip#storage/scsi… [18]: https://github.com/CKI-project/tests-beaker/archive/master.zip#storage/swra… [19]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/filesystems… [20]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/packages/se… Waived tests (marked with 🚧) ----------------------------- This test run included waived tests. Such tests are executed but their results are not taken into account. Tests are waived when their results are not reliable enough, e.g. when they're just introduced or are being fixed.

5 years, 11 months

1
0
0 0

✅ PASS: Stable queue: queue-4.19

by CKI Project

Hello, We ran automated tests on a patchset that was proposed for merging into this kernel tree. The patches were applied to: Kernel repo: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git Commit: 9f31eb60d7a2 - Linux 4.19.53 The results of these automated tests are provided below. Overall result: PASSED Merge: OK Compile: OK Tests: OK Please reply to this email if you have any questions about the tests that we ran or if you have any suggestions on how to make future tests more effective. ,-. ,-. ( C ) ( K ) Continuous `-',-.`-' Kernel ( I ) Integration `-' ______________________________________________________________________________ Merge testing ------------- We cloned this repository and checked out the following commit: Repo: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git Commit: 9f31eb60d7a2 - Linux 4.19.53 We then merged the patchset with `git am`: ax25-fix-inconsistent-lock-state-in-ax25_destroy_timer.patch be2net-fix-number-of-rx-queues-used-for-flow-hashing.patch hv_netvsc-set-probe-mode-to-sync.patch ipv6-flowlabel-fl6_sock_lookup-must-use-atomic_inc_not_zero.patch lapb-fixed-leak-of-control-blocks.patch neigh-fix-use-after-free-read-in-pneigh_get_next.patch net-dsa-rtl8366-fix-up-vlan-filtering.patch net-openvswitch-do-not-free-vport-if-register_netdevice-is-failed.patch net-phylink-set-the-autoneg-state-in-phylink_phy_change.patch nfc-ensure-presence-of-required-attributes-in-the-deactivate_target-handler.patch sctp-free-cookie-before-we-memdup-a-new-one.patch sunhv-fix-device-naming-inconsistency-between-sunhv_console-and-sunhv_reg.patch tipc-purge-deferredq-list-for-each-grp-member-in-tipc_group_delete.patch vsock-virtio-set-sock_done-on-peer-shutdown.patch net-mlx5-avoid-reloading-already-removed-devices.patch net-mvpp2-prs-fix-parser-range-for-vid-filtering.patch net-mvpp2-prs-use-the-correct-helpers-when-removing-all-vid-filters.patch staging-vc04_services-fix-a-couple-error-codes.patch perf-x86-intel-ds-fix-event-vs.-uevent-pebs-constrai.patch netfilter-nf_queue-fix-reinject-verdict-handling.patch ipvs-fix-use-after-free-in-ip_vs_in.patch selftests-netfilter-missing-error-check-when-setting.patch clk-ti-clkctrl-fix-clkdm_clk-handling.patch powerpc-powernv-return-for-invalid-imc-domain.patch usb-xhci-fix-a-potential-null-pointer-dereference-in.patch misdn-make-sure-device-name-is-nul-terminated.patch x86-cpu-amd-don-t-force-the-cpb-cap-when-running-und.patch perf-ring_buffer-fix-exposing-a-temporarily-decrease.patch perf-ring_buffer-add-ordering-to-rb-nest-increment.patch perf-ring-buffer-always-use-read-write-_once-for-rb-.patch gpio-fix-gpio-adp5588-build-errors.patch net-stmmac-update-rx-tail-pointer-register-to-fix-rx.patch net-tulip-de4x5-drop-redundant-module_device_table.patch acpi-pci-pm-add-missing-wakeup.flags.valid-checks.patch loop-don-t-change-loop-device-under-exclusive-opener.patch drm-etnaviv-lock-mmu-while-dumping-core.patch net-aquantia-tx-clean-budget-logic-error.patch net-aquantia-fix-lro-with-fcs-error.patch i2c-dev-fix-potential-memory-leak-in-i2cdev_ioctl_rd.patch alsa-hda-force-polling-mode-on-cnl-for-fixing-codec-.patch configfs-fix-use-after-free-when-accessing-sd-s_dent.patch perf-data-fix-strncat-may-truncate-build-failure-wit.patch perf-namespace-protect-reading-thread-s-namespace.patch perf-record-fix-s390-missing-module-symbol-and-warni.patch ia64-fix-build-errors-by-exporting-paddr_to_nid.patch xen-pvcalls-remove-set-but-not-used-variable.patch xenbus-avoid-deadlock-during-suspend-due-to-open-tra.patch kvm-ppc-book3s-use-new-mutex-to-synchronize-access-t.patch kvm-ppc-book3s-hv-don-t-take-kvm-lock-around-kvm_for.patch arm64-fix-syscall_fn_t-type.patch arm64-use-the-correct-function-type-in-syscall_defin.patch arm64-use-the-correct-function-type-for-__arm64_sys_.patch net-sh_eth-fix-mdio-access-in-sh_eth_close-for-r-car.patch net-phylink-ensure-consistent-phy-interface-mode.patch net-phy-dp83867-set-up-rgmii-tx-delay.patch scsi-libcxgbi-add-a-check-for-null-pointer-in-cxgbi_.patch scsi-smartpqi-properly-set-both-the-dma-mask-and-the.patch scsi-scsi_dh_alua-fix-possible-null-ptr-deref.patch scsi-libsas-delete-sas-port-if-expander-discover-fai.patch mlxsw-spectrum-prevent-force-of-56g.patch ocfs2-fix-error-path-kobject-memory-leak.patch Compile testing --------------- We compiled the kernel for 4 architectures: aarch64: build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg configuration: https://artifacts.cki-project.org/builds/aarch64/kernel-stable_queue_4.19-a… kernel build: https://artifacts.cki-project.org/builds/aarch64/kernel-stable_queue_4.19-a… ppc64le: build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg configuration: https://artifacts.cki-project.org/builds/ppc64le/kernel-stable_queue_4.19-p… kernel build: https://artifacts.cki-project.org/builds/ppc64le/kernel-stable_queue_4.19-p… s390x: build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg configuration: https://artifacts.cki-project.org/builds/s390x/kernel-stable_queue_4.19-s39… kernel build: https://artifacts.cki-project.org/builds/s390x/kernel-stable_queue_4.19-s39… x86_64: build options: -j20 INSTALL_MOD_STRIP=1 targz-pkg configuration: https://artifacts.cki-project.org/builds/x86_64/kernel-stable_queue_4.19-x8… kernel build: https://artifacts.cki-project.org/builds/x86_64/kernel-stable_queue_4.19-x8… Hardware testing ---------------- We booted each kernel and ran the following tests: aarch64: Host 1: ✅ Boot test [0] ✅ selinux-policy: serge-testsuite [1] Host 2: ✅ Boot test [0] ✅ LTP lite [2] ✅ Loopdev Sanity [3] ✅ AMTU (Abstract Machine Test Utility) [4] ✅ LTP: openposix test suite [5] ✅ Ethernet drivers sanity [6] ✅ audit: audit testsuite test [7] ✅ httpd: mod_ssl smoke sanity [8] ✅ iotop: sanity [9] ✅ Usex - version 1.9-29 [10] 🚧 ✅ Networking socket: fuzz [11] 🚧 ✅ Networking sctp-auth: sockopts test [12] 🚧 ✅ tuned: tune-processes-through-perf [13] 🚧 ✅ storage: SCSI VPD [14] ppc64le: Host 1: ✅ Boot test [0] ✅ LTP lite [2] ✅ Loopdev Sanity [3] ✅ AMTU (Abstract Machine Test Utility) [4] ✅ LTP: openposix test suite [5] ✅ Ethernet drivers sanity [6] ✅ audit: audit testsuite test [7] ✅ httpd: mod_ssl smoke sanity [8] ✅ iotop: sanity [9] ✅ Usex - version 1.9-29 [10] 🚧 ✅ Networking socket: fuzz [11] 🚧 ✅ Networking sctp-auth: sockopts test [12] 🚧 ✅ tuned: tune-processes-through-perf [13] Host 2: ✅ Boot test [0] ✅ selinux-policy: serge-testsuite [1] s390x: Host 1: ✅ Boot test [0] ✅ LTP lite [2] ✅ Loopdev Sanity [3] ✅ LTP: openposix test suite [5] ✅ Ethernet drivers sanity [6] ✅ audit: audit testsuite test [7] ✅ httpd: mod_ssl smoke sanity [8] ✅ iotop: sanity [9] 🚧 ✅ Networking socket: fuzz [11] 🚧 ✅ Networking sctp-auth: sockopts test [12] 🚧 ✅ tuned: tune-processes-through-perf [13] Host 2: ✅ Boot test [0] ✅ selinux-policy: serge-testsuite [1] x86_64: Host 1: ✅ Boot test [0] ✅ LTP lite [2] ✅ Loopdev Sanity [3] ✅ AMTU (Abstract Machine Test Utility) [4] ✅ LTP: openposix test suite [5] ✅ Ethernet drivers sanity [6] ✅ audit: audit testsuite test [7] ✅ httpd: mod_ssl smoke sanity [8] ✅ iotop: sanity [9] ✅ Usex - version 1.9-29 [10] 🚧 ✅ Networking socket: fuzz [11] 🚧 ✅ Networking sctp-auth: sockopts test [12] 🚧 ✅ tuned: tune-processes-through-perf [13] 🚧 ✅ storage: SCSI VPD [14] Host 2: ✅ Boot test [0] ✅ selinux-policy: serge-testsuite [1] Test source: 💚 Pull requests are welcome for new tests or improvements to existing tests! [0]: https://github.com/CKI-project/tests-beaker/archive/master.zip#distribution… [1]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/packages/se… [2]: https://github.com/CKI-project/tests-beaker/archive/master.zip#distribution… [3]: https://github.com/CKI-project/tests-beaker/archive/master.zip#filesystems/… [4]: https://github.com/CKI-project/tests-beaker/archive/master.zip#misc/amtu [5]: https://github.com/CKI-project/tests-beaker/archive/master.zip#distribution… [6]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/… [7]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/aud… [8]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/htt… [9]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/iot… [10]: https://github.com/CKI-project/tests-beaker/archive/master.zip#standards/us… [11]: https://github.com/CKI-project/tests-beaker/archive/master.zip#/networking/… [12]: https://github.com/CKI-project/tests-beaker/archive/master.zip#networking/s… [13]: https://github.com/CKI-project/tests-beaker/archive/master.zip#packages/tun… [14]: https://github.com/CKI-project/tests-beaker/archive/master.zip#storage/scsi… Waived tests (marked with 🚧) ----------------------------- This test run included waived tests. Such tests are executed but their results are not taken into account. Tests are waived when their results are not reliable enough, e.g. when they're just introduced or are being fixed.

5 years, 11 months

1
0
0 0

[PATCH] usb: Handle USB3 remote wakeup for LPM enabled devices correctly

by Mathias Nyman

From: "Lee, Chiasheng" <chiasheng.lee(a)intel.com> With Link Power Management (LPM) enabled USB3 links transition to low power U1/U2 link states from U0 state automatically. Current hub code detects USB3 remote wakeups by checking if the software state still shows suspended, but the link has transitioned from suspended U3 to enabled U0 state. As it takes some time before the hub thread reads the port link state after a USB3 wake notification, the link may have transitioned from U0 to U1/U2, and wake is not detected by hub code. Fix this by handling U1/U2 states in the same way as U0 in USB3 wakeup handling This patch should be added to stable kernels since 4.13 where LPM was kept enabled during suspend/resume Cc: <stable(a)vger.kernel.org> # v4.13+ Signed-off-by: Lee, Chiasheng <chiasheng.lee(a)intel.com> Signed-off-by: Mathias Nyman <mathias.nyman(a)linux.intel.com> --- drivers/usb/core/hub.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 2f94568..2c8e60c 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3617,6 +3617,7 @@ static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port, struct usb_device *hdev; struct usb_device *udev; int connect_change = 0; + u16 link_state; int ret; hdev = hub->hdev; @@ -3626,9 +3627,11 @@ static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port, return 0; usb_clear_port_feature(hdev, port, USB_PORT_FEAT_C_SUSPEND); } else { + link_state = portstatus & USB_PORT_STAT_LINK_STATE; if (!udev || udev->state != USB_STATE_SUSPENDED || - (portstatus & USB_PORT_STAT_LINK_STATE) != - USB_SS_PORT_LS_U0) + (link_state != USB_SS_PORT_LS_U0 && + link_state != USB_SS_PORT_LS_U1 && + link_state != USB_SS_PORT_LS_U2)) return 0; } -- 2.7.4

5 years, 11 months

1
0
0 0

❎ FAIL: Stable queue: queue-4.19

by CKI Project

Hello, We ran automated tests on a patchset that was proposed for merging into this kernel tree. The patches were applied to: Kernel repo: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git Commit: 9f31eb60d7a2 - Linux 4.19.53 The results of these automated tests are provided below. Overall result: FAILED (see details below) Merge: FAILED When we attempted to merge the patchset, we received an error: error: patch failed: net/ipv6/ip6_flowlabel.c:254 error: net/ipv6/ip6_flowlabel.c: patch does not apply hint: Use 'git am --show-current-patch' to see the failed patch Applying: ipv6: flowlabel: fl6_sock_lookup() must use atomic_inc_not_zero Patch failed at 0001 ipv6: flowlabel: fl6_sock_lookup() must use atomic_inc_not_zero We hope that these logs can help you find the problem quickly. For the full detail on our testing procedures, please scroll to the bottom of this message. Please reply to this email if you have any questions about the tests that we ran or if you have any suggestions on how to make future tests more effective. ,-. ,-. ( C ) ( K ) Continuous `-',-.`-' Kernel ( I ) Integration `-' ______________________________________________________________________________ Merge testing ------------- We cloned this repository and checked out the following commit: Repo: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git Commit: 9f31eb60d7a2 - Linux 4.19.53 We then merged the patchset with `git am`: ax25-fix-inconsistent-lock-state-in-ax25_destroy_timer.patch be2net-fix-number-of-rx-queues-used-for-flow-hashing.patch hv_netvsc-set-probe-mode-to-sync.patch ipv6-flowlabel-fl6_sock_lookup-must-use-atomic_inc_not_zero.patch lapb-fixed-leak-of-control-blocks.patch neigh-fix-use-after-free-read-in-pneigh_get_next.patch net-dsa-rtl8366-fix-up-vlan-filtering.patch net-openvswitch-do-not-free-vport-if-register_netdevice-is-failed.patch net-phylink-set-the-autoneg-state-in-phylink_phy_change.patch nfc-ensure-presence-of-required-attributes-in-the-deactivate_target-handler.patch sctp-free-cookie-before-we-memdup-a-new-one.patch sunhv-fix-device-naming-inconsistency-between-sunhv_console-and-sunhv_reg.patch tipc-purge-deferredq-list-for-each-grp-member-in-tipc_group_delete.patch vsock-virtio-set-sock_done-on-peer-shutdown.patch net-mlx5-avoid-reloading-already-removed-devices.patch net-mvpp2-prs-fix-parser-range-for-vid-filtering.patch net-mvpp2-prs-use-the-correct-helpers-when-removing-all-vid-filters.patch ipv6-flowlabel-fl6_sock_lookup-must-use-atomic_inc_n.patch

5 years, 11 months

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror June 2019