From: Ofir Drang <ofir.drang(a)arm.com>
During power management suspend the driver need to prepare the device
for the power down operation and as a last indication write to the
HOST_POWER_DOWN_EN register which signals to the hardware that
The ccree is ready for power down.
Signed-off-by: Ofir Drang <ofir.drang(a)arm.com>
Signed-off-by: Gilad Ben-Yossef <gilad(a)benyossef.com>
Cc: stable(a)vger.kernel.org # v4.19+
---
drivers/crypto/ccree/cc_pm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/crypto/ccree/cc_pm.c b/drivers/crypto/ccree/cc_pm.c
index 9a5abe406996..77025da2dcb6 100644
--- a/drivers/crypto/ccree/cc_pm.c
+++ b/drivers/crypto/ccree/cc_pm.c
@@ -25,13 +25,13 @@ int cc_pm_suspend(struct device *dev)
int rc;
dev_dbg(dev, "set HOST_POWER_DOWN_EN\n");
- cc_iowrite(drvdata, CC_REG(HOST_POWER_DOWN_EN), POWER_DOWN_ENABLE);
rc = cc_suspend_req_queue(drvdata);
if (rc) {
dev_err(dev, "cc_suspend_req_queue (%x)\n", rc);
return rc;
}
fini_cc_regs(drvdata);
+ cc_iowrite(drvdata, CC_REG(HOST_POWER_DOWN_EN), POWER_DOWN_ENABLE);
cc_clk_off(drvdata);
return 0;
}
--
2.21.0
commit 662d66466637862ef955f7f6e78a286d8cf0ebef upstream.
When a QP is put into error state, all pending requests in the send
work queue should be drained. The following sequence of events could
lead to a failure, causing a request to hang:
(1) The QP builds a packet and tries to send through SDMA engine.
However, PIO engine is still busy. Consequently, this packet is put
on the QP's tx list and the QP is put on the PIO waiting list. The
field qp->s_flags is set with HFI1_S_WAIT_PIO_DRAIN;
(2) The QP is put into error state by the user application and
notify_error_qp() is called, which removes the QP from the PIO waiting
list and the packet from the QP's tx list. In addition, qp->s_flags
is cleared of RVT_S_ANY_WAIT_IO bits, which does not include
HFI1_S_WAIT_PIO_DRAIN bit;
(3) The hfi1_schdule_send() function is called to drain the QP's send
queue. Subsequently, hfi1_do_send() is called. Since the flag bit
HFI1_S_WAIT_PIO_DRAIN is set in qp->s_flags, hfi1_send_ok() fails.
As a result, hfi1_do_send() bails out without draining any request
from the send queue;
(4) The PIO engine completes the sending and tries to wake up any QP
on its waiting list. But the QP has been removed from the PIO waiting
list and therefore is kept in sleep forever.
The fix is to clear qp->s_flags of HFI1_S_ANY_WAIT_IO bits in step (2).
HFI1_S_ANY_WAIT_IO includes RVT_S_ANY_WAIT_IO and HFI1_S_WAIT_PIO_DRAIN.
Fixes: 2e2ba09e48b7 ("IB/rdmavt, IB/hfi1: Create device dependent s_flags")
Cc: <stable(a)vger.kernel.org> # 4.19.x+
Reviewed-by: Mike Marciniszyn <mike.marciniszyn(a)intel.com>
Reviewed-by: Alex Estrin <alex.estrin(a)intel.com>
Signed-off-by: Kaike Wan <kaike.wan(a)intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro(a)intel.com>
Signed-off-by: Jason Gunthorpe <jgg(a)mellanox.com>
---
drivers/infiniband/hw/hfi1/qp.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/infiniband/hw/hfi1/qp.c b/drivers/infiniband/hw/hfi1/qp.c
index 9b1e84a..63c5ba6 100644
--- a/drivers/infiniband/hw/hfi1/qp.c
+++ b/drivers/infiniband/hw/hfi1/qp.c
@@ -784,7 +784,7 @@ void notify_error_qp(struct rvt_qp *qp)
write_seqlock(lock);
if (!list_empty(&priv->s_iowait.list) &&
!(qp->s_flags & RVT_S_BUSY)) {
- qp->s_flags &= ~RVT_S_ANY_WAIT_IO;
+ qp->s_flags &= ~HFI1_S_ANY_WAIT_IO;
list_del_init(&priv->s_iowait.list);
priv->s_iowait.lock = NULL;
rvt_put_qp(qp);