December 2019 - Linux-stable-mirror

patch "iio: adc: ad7124: Enable internal reference" added to staging-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio: adc: ad7124: Enable internal reference to my staging git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git in the staging-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 11d7c8d3b1259c303fb52789febed58f0bc35ad1 Mon Sep 17 00:00:00 2001 From: Mircea Caprioru <mircea.caprioru(a)analog.com> Date: Mon, 18 Nov 2019 10:38:57 +0200 Subject: iio: adc: ad7124: Enable internal reference When the internal reference was selected by a channel it was not enabled. This patch fixes that and enables it. Fixes: b3af341bbd96 ("iio: adc: Add ad7124 support") Signed-off-by: Mircea Caprioru <mircea.caprioru(a)analog.com> Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> --- drivers/iio/adc/ad7124.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/iio/adc/ad7124.c b/drivers/iio/adc/ad7124.c index edc6f1cc90b2..3f03abf100b5 100644 --- a/drivers/iio/adc/ad7124.c +++ b/drivers/iio/adc/ad7124.c @@ -39,6 +39,8 @@ #define AD7124_STATUS_POR_FLAG_MSK BIT(4) /* AD7124_ADC_CONTROL */ +#define AD7124_ADC_CTRL_REF_EN_MSK BIT(8) +#define AD7124_ADC_CTRL_REF_EN(x) FIELD_PREP(AD7124_ADC_CTRL_REF_EN_MSK, x) #define AD7124_ADC_CTRL_PWR_MSK GENMASK(7, 6) #define AD7124_ADC_CTRL_PWR(x) FIELD_PREP(AD7124_ADC_CTRL_PWR_MSK, x) #define AD7124_ADC_CTRL_MODE_MSK GENMASK(5, 2) @@ -424,7 +426,10 @@ static int ad7124_init_channel_vref(struct ad7124_state *st, break; case AD7124_INT_REF: st->channel_config[channel_number].vref_mv = 2500; - break; + st->adc_control &= ~AD7124_ADC_CTRL_REF_EN_MSK; + st->adc_control |= AD7124_ADC_CTRL_REF_EN(1); + return ad_sd_write_reg(&st->sd, AD7124_ADC_CONTROL, + 2, st->adc_control); default: dev_err(&st->sd.spi->dev, "Invalid reference %d\n", refsel); return -EINVAL; -- 2.24.0

5 years

1
0
0 0

patch "iio: adc: ad7606: fix reading unnecessary data from device" added to staging-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iio: adc: ad7606: fix reading unnecessary data from device to my staging git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git in the staging-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From 341826a065660d1b77d89e6335b6095cd654271c Mon Sep 17 00:00:00 2001 From: Beniamin Bia <beniamin.bia(a)analog.com> Date: Mon, 4 Nov 2019 18:26:34 +0200 Subject: iio: adc: ad7606: fix reading unnecessary data from device MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When a conversion result is being read from ADC, the driver reads the number of channels + 1 because it thinks that IIO_CHAN_SOFT_TIMESTAMP is also a physical channel. This patch fixes this issue. Fixes: 2985a5d88455 ("staging: iio: adc: ad7606: Move out of staging") Reported-by: Robert Wörle <rwoerle(a)mibtec.de> Signed-off-by: Beniamin Bia <beniamin.bia(a)analog.com> Cc: <Stable(a)vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron(a)huawei.com> --- drivers/iio/adc/ad7606.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c index f5ba94c03a8d..e4683a68522a 100644 --- a/drivers/iio/adc/ad7606.c +++ b/drivers/iio/adc/ad7606.c @@ -85,7 +85,7 @@ static int ad7606_reg_access(struct iio_dev *indio_dev, static int ad7606_read_samples(struct ad7606_state *st) { - unsigned int num = st->chip_info->num_channels; + unsigned int num = st->chip_info->num_channels - 1; u16 *data = st->data; int ret; -- 2.24.0

5 years

1
0
0 0

RE: [EXT] Patch "scsi: qedi: Allocate IRQs based on msix_cnt" has been added to the 4.19-stable tree

by Nilesh Javali

Hi, Please do not add this patch to stable kernel, as there is another upstream commit which reverts this patch, 13b99d3 Revert "scsi: qedi: Allocate IRQs based on msix_cnt" Thanks, Nilesh -----Original Message----- From: Sasha Levin <sashal(a)kernel.org> Sent: Saturday, December 7, 2019 2:48 AM To: nilesh.javali(a)cavium.com Cc: stable-commits(a)vger.kernel.org Subject: [EXT] Patch "scsi: qedi: Allocate IRQs based on msix_cnt" has been added to the 4.19-stable tree External Email ---------------------------------------------------------------------- This is a note to let you know that I've just added the patch titled scsi: qedi: Allocate IRQs based on msix_cnt to the 4.19-stable tree which can be found at: https://urldefense.proofpoint.com/v2/url?u=http-3A__www.kernel.org_git_-3Fp… The filename of the patch is: scsi-qedi-allocate-irqs-based-on-msix_cnt.patch and it can be found in the queue-4.19 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. commit 858d07cc26891658bb0c2c3aeee3ca4f84012655 Author: Nilesh Javali <nilesh.javali(a)cavium.com> Date: Wed Nov 21 01:25:18 2018 -0800 scsi: qedi: Allocate IRQs based on msix_cnt [ Upstream commit 1a291bce5eaf5374627d337157544aa6499ce34a ] The driver load on some systems failed with error, [0004:01:00.5]:[qedi_request_msix_irq:2524]:8: request_irq failed. Allocate the IRQs based on MSIX count obtained from qed module instead of number of queues. Signed-off-by: Nilesh Javali <nilesh.javali(a)cavium.com> Reviewed-by: Lee Duncan <lduncan(a)suse.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <sashal(a)kernel.org> diff --git a/drivers/scsi/qedi/qedi_main.c b/drivers/scsi/qedi/qedi_main.c index 763c7628356b1..a81ea8f6c2087 100644 --- a/drivers/scsi/qedi/qedi_main.c +++ b/drivers/scsi/qedi/qedi_main.c @@ -1304,7 +1304,7 @@ static int qedi_request_msix_irq(struct qedi_ctx *qedi) int i, rc, cpu; cpu = cpumask_first(cpu_online_mask); - for (i = 0; i < MIN_NUM_CPUS_MSIX(qedi); i++) { + for (i = 0; i < qedi->int_info.msix_cnt; i++) { rc = request_irq(qedi->int_info.msix[i].vector, qedi_msix_handler, 0, "qedi", &qedi->fp_array[i]);

5 years

2
1
0 0

[PATCH] gfs2: Another gfs2_find_jhead fix

by Andreas Gruenbacher

On filesystems with a block size smaller that the page size, a page can be split across bios. When that happens, the first bio that completes will unlock the page even though it hasn't been read completely yet. Fix that case by using a small chained bio. While at it, clean up the sector calculation logic in gfs2_log_alloc_bio. In gfs2_find_jhead, simplify the disk block and offset calculation logic and fix a variable name. Fixes: f4686c26ecc3 ("gfs2: read journal in large chunks") Cc: stable(a)vger.kernel.org # v5.2+ Signed-off-by: Andreas Gruenbacher <agruenba(a)redhat.com> --- fs/gfs2/lops.c | 54 ++++++++++++++++++++++++++++++-------------------- 1 file changed, 33 insertions(+), 21 deletions(-) diff --git a/fs/gfs2/lops.c b/fs/gfs2/lops.c index 55fed7daf2b1..c817dee337c9 100644 --- a/fs/gfs2/lops.c +++ b/fs/gfs2/lops.c @@ -259,7 +259,7 @@ static struct bio *gfs2_log_alloc_bio(struct gfs2_sbd *sdp, u64 blkno, struct super_block *sb = sdp->sd_vfs; struct bio *bio = bio_alloc(GFP_NOIO, BIO_MAX_PAGES); - bio->bi_iter.bi_sector = blkno * (sb->s_blocksize >> 9); + bio->bi_iter.bi_sector = blkno << (sb->s_blocksize_bits - 9); bio_set_dev(bio, sb->s_bdev); bio->bi_end_io = end_io; bio->bi_private = sdp; @@ -472,6 +472,21 @@ static void gfs2_jhead_process_page(struct gfs2_jdesc *jd, unsigned long index, put_page(page); /* Once more for find_or_create_page */ } +static struct bio *gfs2_chain_bio(struct bio *prev) +{ + struct bio *new; + + /* one iovec only to avoid chaining the chained bio */ + new = bio_alloc(GFP_NOIO, 1); + bio_copy_dev(new, prev); + new->bi_iter.bi_sector = bio_end_sector(prev); + new->bi_opf = prev->bi_opf; + new->bi_write_hint = prev->bi_write_hint; + bio_chain(new, prev); + submit_bio(prev); + return new; +} + /** * gfs2_find_jhead - find the head of a log * @jd: The journal descriptor @@ -488,10 +503,10 @@ int gfs2_find_jhead(struct gfs2_jdesc *jd, struct gfs2_log_header_host *head, struct gfs2_sbd *sdp = GFS2_SB(jd->jd_inode); struct address_space *mapping = jd->jd_inode->i_mapping; unsigned int block = 0, blocks_submitted = 0, blocks_read = 0; - unsigned int bsize = sdp->sd_sb.sb_bsize; + unsigned int bsize = sdp->sd_sb.sb_bsize, off; unsigned int bsize_shift = sdp->sd_sb.sb_bsize_shift; unsigned int shift = PAGE_SHIFT - bsize_shift; - unsigned int readhead_blocks = BIO_MAX_PAGES << shift; + unsigned int readahead_blocks = BIO_MAX_PAGES << shift; struct gfs2_journal_extent *je; int sz, ret = 0; struct bio *bio = NULL; @@ -505,9 +520,9 @@ int gfs2_find_jhead(struct gfs2_jdesc *jd, struct gfs2_log_header_host *head, since = filemap_sample_wb_err(mapping); list_for_each_entry(je, &jd->extent_list, list) { - for (; block < je->lblock + je->blocks; block++) { - u64 dblock; + u64 dblock = je->dblock; + for (; block < je->lblock + je->blocks; block++, dblock++) { if (!page) { page = find_or_create_page(mapping, block >> shift, GFP_NOFS); @@ -516,35 +531,32 @@ int gfs2_find_jhead(struct gfs2_jdesc *jd, struct gfs2_log_header_host *head, done = true; goto out; } + off = 0; } if (bio) { - unsigned int off; - - off = (block << bsize_shift) & ~PAGE_MASK; sz = bio_add_page(bio, page, bsize, off); - if (sz == bsize) { /* block added */ - if (off + bsize == PAGE_SIZE) { - page = NULL; - goto page_added; - } - continue; + if (sz == bsize) + goto block_added; + if (off) { + bio = gfs2_chain_bio(bio); + goto add_block_to_new_bio; } blocks_submitted = block + 1; submit_bio(bio); bio = NULL; } - dblock = je->dblock + (block - je->lblock); bio = gfs2_log_alloc_bio(sdp, dblock, gfs2_end_log_read); bio->bi_opf = REQ_OP_READ; - sz = bio_add_page(bio, page, bsize, 0); - gfs2_assert_warn(sdp, sz == bsize); - if (bsize == PAGE_SIZE) +add_block_to_new_bio: + sz = bio_add_page(bio, page, bsize, off); + BUG_ON(sz != bsize); +block_added: + off += bsize; + if (off == PAGE_SIZE) page = NULL; - -page_added: - if (blocks_submitted < blocks_read + readhead_blocks) { + if (blocks_submitted < blocks_read + readahead_blocks) { /* Keep at least one bio in flight */ continue; } -- 2.20.1

5 years

1
0
0 0

[PATCH 2/2] ext4: Check for directory entries too close to block end

by Jan Kara

ext4_check_dir_entry() currently does not catch a case when a directory entry ends so close to the block end that the header of the next directory entry would not fit in the remaining space. This can lead to directory iteration code trying to access address beyond end of current buffer head leading to oops. CC: stable(a)vger.kernel.org Signed-off-by: Jan Kara <jack(a)suse.cz> --- fs/ext4/dir.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/fs/ext4/dir.c b/fs/ext4/dir.c index 9fdd2b269d61..6305d5ec25af 100644 --- a/fs/ext4/dir.c +++ b/fs/ext4/dir.c @@ -81,6 +81,11 @@ int __ext4_check_dir_entry(const char *function, unsigned int line, error_msg = "rec_len is too small for name_len"; else if (unlikely(((char *) de - buf) + rlen > size)) error_msg = "directory entry overrun"; + else if (unlikely(((char *) de - buf) + rlen > + size - EXT4_DIR_REC_LEN(1) && + ((char *) de - buf) + rlen != size)) { + error_msg = "directory entry too close to block end"; + } else if (unlikely(le32_to_cpu(de->inode) > le32_to_cpu(EXT4_SB(dir->i_sb)->s_es->s_inodes_count))) error_msg = "inode out of bounds"; -- 2.16.4

5 years

2
1
0 0

[PATCH 1/2] ext4: Fix ext4_empty_dir() for directories with holes

by Jan Kara

Function ext4_empty_dir() doesn't correctly handle directories with holes and crashes on bh->b_data dereference when bh is NULL. Reorganize the loop to use 'offset' variable all the times instead of comparing pointers to current direntry with bh->b_data pointer. Also add more strict checking of '.' and '..' directory entries to avoid entering loop in possibly invalid state on corrupted filesystems. References: CVE-2019-19037 CC: stable(a)vger.kernel.org Fixes: 4e19d6b65fb4 ("ext4: allow directory holes") Signed-off-by: Jan Kara <jack(a)suse.cz> --- fs/ext4/namei.c | 32 ++++++++++++++++++-------------- 1 file changed, 18 insertions(+), 14 deletions(-) diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c index a427d2031a8d..abf52f98f3ca 100644 --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -2808,7 +2808,7 @@ bool ext4_empty_dir(struct inode *inode) { unsigned int offset; struct buffer_head *bh; - struct ext4_dir_entry_2 *de, *de1; + struct ext4_dir_entry_2 *de; struct super_block *sb; if (ext4_has_inline_data(inode)) { @@ -2833,19 +2833,25 @@ bool ext4_empty_dir(struct inode *inode) return true; de = (struct ext4_dir_entry_2 *) bh->b_data; - de1 = ext4_next_entry(de, sb->s_blocksize); - if (le32_to_cpu(de->inode) != inode->i_ino || - le32_to_cpu(de1->inode) == 0 || - strcmp(".", de->name) || strcmp("..", de1->name)) { - ext4_warning_inode(inode, "directory missing '.' and/or '..'"); + if (ext4_check_dir_entry(inode, NULL, de, bh, bh->b_data, bh->b_size, + 0) || + le32_to_cpu(de->inode) != inode->i_ino || strcmp(".", de->name)) { + ext4_warning_inode(inode, "directory missing '.'"); + brelse(bh); + return true; + } + offset = ext4_rec_len_from_disk(de->rec_len, sb->s_blocksize); + de = ext4_next_entry(de, sb->s_blocksize); + if (ext4_check_dir_entry(inode, NULL, de, bh, bh->b_data, bh->b_size, + offset) || + le32_to_cpu(de->inode) == 0 || strcmp("..", de->name)) { + ext4_warning_inode(inode, "directory missing '..'"); brelse(bh); return true; } - offset = ext4_rec_len_from_disk(de->rec_len, sb->s_blocksize) + - ext4_rec_len_from_disk(de1->rec_len, sb->s_blocksize); - de = ext4_next_entry(de1, sb->s_blocksize); + offset += ext4_rec_len_from_disk(de->rec_len, sb->s_blocksize); while (offset < inode->i_size) { - if ((void *) de >= (void *) (bh->b_data+sb->s_blocksize)) { + if (!(offset & (sb->s_blocksize - 1))) { unsigned int lblock; brelse(bh); lblock = offset >> EXT4_BLOCK_SIZE_BITS(sb); @@ -2856,12 +2862,11 @@ bool ext4_empty_dir(struct inode *inode) } if (IS_ERR(bh)) return true; - de = (struct ext4_dir_entry_2 *) bh->b_data; } + de = (struct ext4_dir_entry_2 *) (bh->b_data + + (offset & (sb->s_blocksize - 1))); if (ext4_check_dir_entry(inode, NULL, de, bh, bh->b_data, bh->b_size, offset)) { - de = (struct ext4_dir_entry_2 *)(bh->b_data + - sb->s_blocksize); offset = (offset | (sb->s_blocksize - 1)) + 1; continue; } @@ -2870,7 +2875,6 @@ bool ext4_empty_dir(struct inode *inode) return false; } offset += ext4_rec_len_from_disk(de->rec_len, sb->s_blocksize); - de = ext4_next_entry(de, sb->s_blocksize); } brelse(bh); return true; -- 2.16.4

5 years

2
1
0 0

[tip: efi/urgent] efi/memreserve: Register reservations as 'reserved' in /proc/iomem

by tip-bot2 for Ard Biesheuvel

The following commit has been merged into the efi/urgent branch of tip: Commit-ID: ab0eb16205b43ece4c78e2259e681ff3d645ea66 Gitweb: https://git.kernel.org/tip/ab0eb16205b43ece4c78e2259e681ff3d645ea66 Author: Ard Biesheuvel <ardb(a)kernel.org> AuthorDate: Fri, 06 Dec 2019 16:55:37 Committer: Ingo Molnar <mingo(a)kernel.org> CommitterDate: Sun, 08 Dec 2019 12:42:18 +01:00 efi/memreserve: Register reservations as 'reserved' in /proc/iomem Memory regions that are reserved using efi_mem_reserve_persistent() are recorded in a special EFI config table which survives kexec, allowing the incoming kernel to honour them as well. However, such reservations are not visible in /proc/iomem, and so the kexec tools that load the incoming kernel and its initrd into memory may overwrite these reserved regions before the incoming kernel has a chance to reserve them from further use. Address this problem by adding these reservations to /proc/iomem as they are created. Note that reservations that are inherited from a previous kernel are memblock_reserve()'d early on, so they are already visible in /proc/iomem. Tested-by: Masayoshi Mizuma <m.mizuma(a)jp.fujitsu.com> Tested-by: Bhupesh Sharma <bhsharma(a)redhat.com> Signed-off-by: Ard Biesheuvel <ardb(a)kernel.org> Reviewed-by: Bhupesh Sharma <bhsharma(a)redhat.com> Cc: <stable(a)vger.kernel.org> # v5.4+ Cc: Andy Shevchenko <andriy.shevchenko(a)linux.intel.com> Cc: Arvind Sankar <nivedita(a)alum.mit.edu> Cc: linux-efi(a)vger.kernel.org Link: https://lkml.kernel.org/r/20191206165542.31469-2-ardb@kernel.org Signed-off-by: Ingo Molnar <mingo(a)kernel.org> --- drivers/firmware/efi/efi.c | 28 ++++++++++++++++++++++++++-- 1 file changed, 26 insertions(+), 2 deletions(-) diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c index d101f07..b096195 100644 --- a/drivers/firmware/efi/efi.c +++ b/drivers/firmware/efi/efi.c @@ -979,6 +979,24 @@ static int __init efi_memreserve_map_root(void) return 0; } +static int efi_mem_reserve_iomem(phys_addr_t addr, u64 size) +{ + struct resource *res, *parent; + + res = kzalloc(sizeof(struct resource), GFP_ATOMIC); + if (!res) + return -ENOMEM; + + res->name = "reserved"; + res->flags = IORESOURCE_MEM; + res->start = addr; + res->end = addr + size - 1; + + /* we expect a conflict with a 'System RAM' region */ + parent = request_resource_conflict(&iomem_resource, res); + return parent ? request_resource(parent, res) : 0; +} + int __ref efi_mem_reserve_persistent(phys_addr_t addr, u64 size) { struct linux_efi_memreserve *rsv; @@ -1003,7 +1021,7 @@ int __ref efi_mem_reserve_persistent(phys_addr_t addr, u64 size) rsv->entry[index].size = size; memunmap(rsv); - return 0; + return efi_mem_reserve_iomem(addr, size); } memunmap(rsv); } @@ -1013,6 +1031,12 @@ int __ref efi_mem_reserve_persistent(phys_addr_t addr, u64 size) if (!rsv) return -ENOMEM; + rc = efi_mem_reserve_iomem(__pa(rsv), SZ_4K); + if (rc) { + free_page((unsigned long)rsv); + return rc; + } + /* * The memremap() call above assumes that a linux_efi_memreserve entry * never crosses a page boundary, so let's ensure that this remains true @@ -1029,7 +1053,7 @@ int __ref efi_mem_reserve_persistent(phys_addr_t addr, u64 size) efi_memreserve_root->next = __pa(rsv); spin_unlock(&efi_mem_reserve_persistent_lock); - return 0; + return efi_mem_reserve_iomem(addr, size); } static int __init efi_memreserve_root_init(void)

5 years

1
0
0 0

✅ PASS: Test report for kernel 5.3.15-aba451e.cki (stable-queue)

by CKI Project

Hello, We ran automated tests on a recent commit from this kernel tree: Kernel repo: git://git.kernel.org/pub/scm/linux/kernel/git/stable/stable-queue.git Commit: aba451e7e60f - io_uring: ensure req->submit is copied when req is deferred The results of these automated tests are provided below. Overall result: PASSED Merge: OK Compile: OK Tests: OK All kernel binaries, config files, and logs are available for download here: https://artifacts.cki-project.org/pipelines/328660 Please reply to this email if you have any questions about the tests that we ran or if you have any suggestions on how to make future tests more effective. ,-. ,-. ( C ) ( K ) Continuous `-',-.`-' Kernel ( I ) Integration `-' ______________________________________________________________________________ Compile testing --------------- We compiled the kernel for 3 architectures: aarch64: make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg ppc64le: make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg x86_64: make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg Hardware testing ---------------- We booted each kernel and ran the following tests: aarch64: Host 1: ✅ Boot test ✅ xfstests: ext4 ✅ xfstests: xfs ✅ lvm thinp sanity ✅ storage: software RAID testing 🚧 ✅ selinux-policy: serge-testsuite 🚧 ✅ Storage blktests Host 2: ✅ Boot test ✅ Podman system integration test (as root) ✅ Podman system integration test (as user) ✅ LTP ✅ Loopdev Sanity ✅ Memory function: memfd_create ✅ Memory function: kaslr ✅ AMTU (Abstract Machine Test Utility) ✅ Networking bridge: sanity ✅ Ethernet drivers sanity ✅ Networking MACsec: sanity ✅ Networking socket: fuzz ✅ Networking sctp-auth: sockopts test ✅ Networking: igmp conformance test ✅ Networking route: pmtu ✅ Networking route_func: local ✅ Networking route_func: forward ✅ Networking TCP: keepalive test ✅ Networking UDP: socket ✅ Networking tunnel: geneve basic test ✅ Networking tunnel: gre basic ✅ L2TP basic test ✅ Networking tunnel: vxlan basic ✅ Networking ipsec: basic netns transport ✅ Networking ipsec: basic netns tunnel ✅ audit: audit testsuite test ✅ httpd: mod_ssl smoke sanity ✅ tuned: tune-processes-through-perf ✅ ALSA PCM loopback test ✅ ALSA Control (mixer) Userspace Element test ✅ storage: SCSI VPD ✅ stress: stress-ng ✅ trace: ftrace/tracer 🚧 ✅ CIFS Connectathon 🚧 ✅ POSIX pjd-fstest suites 🚧 ✅ jvm test suite 🚧 ✅ LTP: openposix test suite 🚧 ✅ Networking vnic: ipvlan/basic 🚧 ✅ iotop: sanity 🚧 ✅ Usex - version 1.9-29 🚧 ✅ storage: dm/common ppc64le: Host 1: ✅ Boot test ✅ xfstests: ext4 ✅ xfstests: xfs ✅ lvm thinp sanity ✅ storage: software RAID testing 🚧 ✅ IPMI driver test 🚧 ✅ IPMItool loop stress test 🚧 ✅ selinux-policy: serge-testsuite 🚧 ✅ Storage blktests Host 2: ✅ Boot test ✅ Podman system integration test (as root) ✅ Podman system integration test (as user) ✅ LTP ✅ Loopdev Sanity ✅ Memory function: memfd_create ✅ Memory function: kaslr ✅ AMTU (Abstract Machine Test Utility) ✅ Networking bridge: sanity ✅ Ethernet drivers sanity ✅ Networking MACsec: sanity ✅ Networking socket: fuzz ✅ Networking sctp-auth: sockopts test ✅ Networking route: pmtu ✅ Networking route_func: local ✅ Networking route_func: forward ✅ Networking TCP: keepalive test ✅ Networking UDP: socket ✅ Networking tunnel: geneve basic test ✅ Networking tunnel: gre basic ✅ L2TP basic test ✅ Networking tunnel: vxlan basic ✅ Networking ipsec: basic netns tunnel ✅ audit: audit testsuite test ✅ httpd: mod_ssl smoke sanity ✅ tuned: tune-processes-through-perf ✅ ALSA PCM loopback test ✅ ALSA Control (mixer) Userspace Element test ✅ trace: ftrace/tracer 🚧 ✅ CIFS Connectathon 🚧 ✅ POSIX pjd-fstest suites 🚧 ✅ jvm test suite 🚧 ✅ LTP: openposix test suite 🚧 ✅ Networking vnic: ipvlan/basic 🚧 ✅ iotop: sanity 🚧 ✅ Usex - version 1.9-29 🚧 ✅ storage: dm/common x86_64: Host 1: ✅ Boot test ✅ Storage SAN device stress - mpt3sas driver Host 2: ✅ Boot test ✅ Podman system integration test (as root) ✅ Podman system integration test (as user) ✅ LTP ✅ Loopdev Sanity ✅ Memory function: memfd_create ✅ Memory function: kaslr ✅ AMTU (Abstract Machine Test Utility) ✅ Networking bridge: sanity ✅ Ethernet drivers sanity ✅ Networking MACsec: sanity ✅ Networking socket: fuzz ✅ Networking sctp-auth: sockopts test ✅ Networking: igmp conformance test ✅ Networking route: pmtu ✅ Networking route_func: local ✅ Networking route_func: forward ✅ Networking TCP: keepalive test ✅ Networking UDP: socket ✅ Networking tunnel: geneve basic test ✅ Networking tunnel: gre basic ✅ L2TP basic test ✅ Networking tunnel: vxlan basic ✅ Networking ipsec: basic netns transport ✅ Networking ipsec: basic netns tunnel ✅ audit: audit testsuite test ✅ httpd: mod_ssl smoke sanity ✅ tuned: tune-processes-through-perf ✅ pciutils: sanity smoke test ✅ ALSA PCM loopback test ✅ ALSA Control (mixer) Userspace Element test ✅ storage: SCSI VPD ✅ stress: stress-ng ✅ trace: ftrace/tracer 🚧 ✅ CIFS Connectathon 🚧 ✅ POSIX pjd-fstest suites 🚧 ✅ jvm test suite 🚧 ✅ LTP: openposix test suite 🚧 ✅ Networking vnic: ipvlan/basic 🚧 ✅ iotop: sanity 🚧 ✅ Usex - version 1.9-29 🚧 ✅ storage: dm/common Host 3: ✅ Boot test ✅ xfstests: ext4 ✅ xfstests: xfs ✅ lvm thinp sanity ✅ storage: software RAID testing 🚧 ✅ IOMMU boot test 🚧 ✅ IPMI driver test 🚧 ✅ IPMItool loop stress test 🚧 ✅ selinux-policy: serge-testsuite 🚧 ✅ Storage blktests Host 4: ✅ Boot test ✅ Storage SAN device stress - megaraid_sas Test sources: https://github.com/CKI-project/tests-beaker 💚 Pull requests are welcome for new tests or improvements to existing tests! Waived tests ------------ If the test run included waived tests, they are marked with 🚧. Such tests are executed but their results are not taken into account. Tests are waived when their results are not reliable enough, e.g. when they're just introduced or are being fixed. Testing timeout --------------- We aim to provide a report within reasonable timeframe. Tests that haven't finished running are marked with ⏱. Reports for non-upstream kernels have a Beaker recipe linked to next to each host.

5 years

1
0
0 0

❌ FAIL: Test report for kernel 5.3.15-8e281b4.cki (stable-queue)

by CKI Project

Hello, We ran automated tests on a recent commit from this kernel tree: Kernel repo: git://git.kernel.org/pub/scm/linux/kernel/git/stable/stable-queue.git Commit: 8e281b48a8d6 - fuse: verify attributes The results of these automated tests are provided below. Overall result: FAILED (see details below) Merge: OK Compile: OK Tests: FAILED All kernel binaries, config files, and logs are available for download here: https://artifacts.cki-project.org/pipelines/328444 One or more kernel tests failed: x86_64: ❌ Boot test ❌ Boot test We hope that these logs can help you find the problem quickly. For the full detail on our testing procedures, please scroll to the bottom of this message. Please reply to this email if you have any questions about the tests that we ran or if you have any suggestions on how to make future tests more effective. ,-. ,-. ( C ) ( K ) Continuous `-',-.`-' Kernel ( I ) Integration `-' ______________________________________________________________________________ Compile testing --------------- We compiled the kernel for 3 architectures: aarch64: make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg ppc64le: make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg x86_64: make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg Hardware testing ---------------- We booted each kernel and ran the following tests: aarch64: Host 1: ✅ Boot test ✅ xfstests: ext4 ✅ xfstests: xfs ✅ lvm thinp sanity ✅ storage: software RAID testing 🚧 ✅ selinux-policy: serge-testsuite 🚧 ✅ Storage blktests Host 2: ✅ Boot test ✅ Podman system integration test (as root) ✅ Podman system integration test (as user) ✅ LTP ✅ Loopdev Sanity ✅ Memory function: memfd_create ✅ Memory function: kaslr ✅ AMTU (Abstract Machine Test Utility) ✅ Networking bridge: sanity ✅ Ethernet drivers sanity ✅ Networking MACsec: sanity ✅ Networking socket: fuzz ✅ Networking sctp-auth: sockopts test ✅ Networking: igmp conformance test ✅ Networking route: pmtu ✅ Networking route_func: local ✅ Networking route_func: forward ✅ Networking TCP: keepalive test ✅ Networking UDP: socket ✅ Networking tunnel: geneve basic test ✅ Networking tunnel: gre basic ✅ L2TP basic test ✅ Networking tunnel: vxlan basic ✅ Networking ipsec: basic netns transport ✅ Networking ipsec: basic netns tunnel ✅ audit: audit testsuite test ✅ httpd: mod_ssl smoke sanity ✅ tuned: tune-processes-through-perf ✅ ALSA PCM loopback test ✅ ALSA Control (mixer) Userspace Element test ✅ storage: SCSI VPD ✅ trace: ftrace/tracer 🚧 ✅ CIFS Connectathon 🚧 ✅ POSIX pjd-fstest suites 🚧 ✅ jvm test suite 🚧 ✅ LTP: openposix test suite 🚧 ✅ Networking vnic: ipvlan/basic 🚧 ✅ iotop: sanity 🚧 ✅ Usex - version 1.9-29 🚧 ✅ storage: dm/common ppc64le: Host 1: ✅ Boot test ✅ xfstests: ext4 ✅ xfstests: xfs ✅ lvm thinp sanity ✅ storage: software RAID testing 🚧 ✅ IPMI driver test 🚧 ✅ IPMItool loop stress test 🚧 ✅ selinux-policy: serge-testsuite 🚧 ✅ Storage blktests Host 2: ✅ Boot test ✅ Podman system integration test (as root) ✅ Podman system integration test (as user) ✅ LTP ✅ Loopdev Sanity ✅ Memory function: memfd_create ✅ Memory function: kaslr ✅ AMTU (Abstract Machine Test Utility) ✅ Networking bridge: sanity ✅ Ethernet drivers sanity ✅ Networking MACsec: sanity ✅ Networking socket: fuzz ✅ Networking sctp-auth: sockopts test ✅ Networking route: pmtu ✅ Networking route_func: local ✅ Networking route_func: forward ✅ Networking TCP: keepalive test ✅ Networking UDP: socket ✅ Networking tunnel: geneve basic test ✅ Networking tunnel: gre basic ✅ L2TP basic test ✅ Networking tunnel: vxlan basic ✅ Networking ipsec: basic netns tunnel ✅ audit: audit testsuite test ✅ httpd: mod_ssl smoke sanity ✅ tuned: tune-processes-through-perf ✅ ALSA PCM loopback test ✅ ALSA Control (mixer) Userspace Element test ✅ trace: ftrace/tracer 🚧 ✅ CIFS Connectathon 🚧 ✅ POSIX pjd-fstest suites 🚧 ✅ jvm test suite 🚧 ✅ LTP: openposix test suite 🚧 ✅ Networking vnic: ipvlan/basic 🚧 ✅ iotop: sanity 🚧 ✅ Usex - version 1.9-29 🚧 ✅ storage: dm/common x86_64: Host 1: ❌ Boot test ⚡⚡⚡ Storage SAN device stress - mpt3sas driver Host 2: ❌ Boot test ⚡⚡⚡ Podman system integration test (as root) ⚡⚡⚡ Podman system integration test (as user) ⚡⚡⚡ LTP ⚡⚡⚡ Loopdev Sanity ⚡⚡⚡ Memory function: memfd_create ⚡⚡⚡ Memory function: kaslr ⚡⚡⚡ AMTU (Abstract Machine Test Utility) ⚡⚡⚡ Networking bridge: sanity ⚡⚡⚡ Ethernet drivers sanity ⚡⚡⚡ Networking MACsec: sanity ⚡⚡⚡ Networking socket: fuzz ⚡⚡⚡ Networking sctp-auth: sockopts test ⚡⚡⚡ Networking: igmp conformance test ⚡⚡⚡ Networking route: pmtu ⚡⚡⚡ Networking route_func: local ⚡⚡⚡ Networking route_func: forward ⚡⚡⚡ Networking TCP: keepalive test ⚡⚡⚡ Networking UDP: socket ⚡⚡⚡ Networking tunnel: geneve basic test ⚡⚡⚡ Networking tunnel: gre basic ⚡⚡⚡ L2TP basic test ⚡⚡⚡ Networking tunnel: vxlan basic ⚡⚡⚡ Networking ipsec: basic netns transport ⚡⚡⚡ Networking ipsec: basic netns tunnel ⚡⚡⚡ audit: audit testsuite test ⚡⚡⚡ httpd: mod_ssl smoke sanity ⚡⚡⚡ tuned: tune-processes-through-perf ⚡⚡⚡ pciutils: sanity smoke test ⚡⚡⚡ ALSA PCM loopback test ⚡⚡⚡ ALSA Control (mixer) Userspace Element test ⚡⚡⚡ storage: SCSI VPD ⚡⚡⚡ stress: stress-ng ⚡⚡⚡ trace: ftrace/tracer 🚧 ⚡⚡⚡ CIFS Connectathon 🚧 ⚡⚡⚡ POSIX pjd-fstest suites 🚧 ⚡⚡⚡ jvm test suite 🚧 ⚡⚡⚡ LTP: openposix test suite 🚧 ⚡⚡⚡ Networking vnic: ipvlan/basic 🚧 ⚡⚡⚡ iotop: sanity 🚧 ⚡⚡⚡ Usex - version 1.9-29 🚧 ⚡⚡⚡ storage: dm/common Host 3: ✅ Boot test ✅ xfstests: ext4 ✅ xfstests: xfs ✅ lvm thinp sanity ✅ storage: software RAID testing 🚧 ✅ IOMMU boot test 🚧 ✅ IPMI driver test 🚧 ✅ IPMItool loop stress test 🚧 ✅ selinux-policy: serge-testsuite 🚧 ✅ Storage blktests Host 4: ✅ Boot test ✅ Storage SAN device stress - megaraid_sas Test sources: https://github.com/CKI-project/tests-beaker 💚 Pull requests are welcome for new tests or improvements to existing tests! Waived tests ------------ If the test run included waived tests, they are marked with 🚧. Such tests are executed but their results are not taken into account. Tests are waived when their results are not reliable enough, e.g. when they're just introduced or are being fixed. Testing timeout --------------- We aim to provide a report within reasonable timeframe. Tests that haven't finished running are marked with ⏱. Reports for non-upstream kernels have a Beaker recipe linked to next to each host.

5 years

1
0
0 0

stable-rc/linux-4.19.y boot: 39 boots: 0 failed, 38 passed with 1 untried/unknown (v4.19.88-209-g5944fcdd7eb0)

by kernelci.org bot

stable-rc/linux-4.19.y boot: 39 boots: 0 failed, 38 passed with 1 untried/unknown (v4.19.88-209-g5944fcdd7eb0) Full Boot Summary: https://kernelci.org/boot/all/job/stable-rc/branch/linux-4.19.y/kernel/v4.1… Full Build Summary: https://kernelci.org/build/stable-rc/branch/linux-4.19.y/kernel/v4.19.88-20… Tree: stable-rc Branch: linux-4.19.y Git Describe: v4.19.88-209-g5944fcdd7eb0 Git Commit: 5944fcdd7eb0add713dd4b614377cb3ad97309b3 Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git Tested: 30 unique boards, 10 SoC families, 12 builds out of 206 --- For more info write to <info(a)kernelci.org>

5 years

1
0
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror December 2019