October 2019 - Linux-stable-mirror

patch "USB: yurex: fix NULL-derefs on disconnect" added to usb-linus

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: yurex: fix NULL-derefs on disconnect to my usb git tree which can be found at git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git in the usb-linus branch. The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.) The patch will hopefully also be merged in Linus's tree for the next -rc kernel release. If you have any questions about this process, please let me know. >From aafb00a977cf7d81821f7c9d12e04c558c22dc3c Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan(a)kernel.org> Date: Wed, 9 Oct 2019 17:38:48 +0200 Subject: USB: yurex: fix NULL-derefs on disconnect The driver was using its struct usb_interface pointer as an inverted disconnected flag, but was setting it to NULL without making sure all code paths that used it were done with it. Before commit ef61eb43ada6 ("USB: yurex: Fix protection fault after device removal") this included the interrupt-in completion handler, but there are further accesses in dev_err and dev_dbg statements in yurex_write() and the driver-data destructor (sic!). Fix this by unconditionally stopping also the control URB at disconnect and by using a dedicated disconnected flag. Note that we need to take a reference to the struct usb_interface to avoid a use-after-free in the destructor whenever the device was disconnected while the character device was still open. Fixes: aadd6472d904 ("USB: yurex.c: remove dbg() usage") Fixes: 45714104b9e8 ("USB: yurex.c: remove err() usage") Cc: stable <stable(a)vger.kernel.org> # 3.5: ef61eb43ada6 Signed-off-by: Johan Hovold <johan(a)kernel.org> Link: https://lore.kernel.org/r/20191009153848.8664-6-johan@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/misc/yurex.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c index 8d52d4336c29..be0505b8b5d4 100644 --- a/drivers/usb/misc/yurex.c +++ b/drivers/usb/misc/yurex.c @@ -60,6 +60,7 @@ struct usb_yurex { struct kref kref; struct mutex io_mutex; + unsigned long disconnected:1; struct fasync_struct *async_queue; wait_queue_head_t waitq; @@ -107,6 +108,7 @@ static void yurex_delete(struct kref *kref) dev->int_buffer, dev->urb->transfer_dma); usb_free_urb(dev->urb); } + usb_put_intf(dev->interface); usb_put_dev(dev->udev); kfree(dev); } @@ -205,7 +207,7 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_ init_waitqueue_head(&dev->waitq); dev->udev = usb_get_dev(interface_to_usbdev(interface)); - dev->interface = interface; + dev->interface = usb_get_intf(interface); /* set up the endpoint information */ iface_desc = interface->cur_altsetting; @@ -316,8 +318,9 @@ static void yurex_disconnect(struct usb_interface *interface) /* prevent more I/O from starting */ usb_poison_urb(dev->urb); + usb_poison_urb(dev->cntl_urb); mutex_lock(&dev->io_mutex); - dev->interface = NULL; + dev->disconnected = 1; mutex_unlock(&dev->io_mutex); /* wakeup waiters */ @@ -405,7 +408,7 @@ static ssize_t yurex_read(struct file *file, char __user *buffer, size_t count, dev = file->private_data; mutex_lock(&dev->io_mutex); - if (!dev->interface) { /* already disconnected */ + if (dev->disconnected) { /* already disconnected */ mutex_unlock(&dev->io_mutex); return -ENODEV; } @@ -440,7 +443,7 @@ static ssize_t yurex_write(struct file *file, const char __user *user_buffer, goto error; mutex_lock(&dev->io_mutex); - if (!dev->interface) { /* already disconnected */ + if (dev->disconnected) { /* already disconnected */ mutex_unlock(&dev->io_mutex); retval = -ENODEV; goto error; -- 2.23.0

5 years, 3 months

1
0
0 0

[PATCH 5/5] USB: yurex: fix NULL-derefs on disconnect

by Johan Hovold

The driver was using its struct usb_interface pointer as an inverted disconnected flag, but was setting it to NULL without making sure all code paths that used it were done with it. Before commit ef61eb43ada6 ("USB: yurex: Fix protection fault after device removal") this included the interrupt-in completion handler, but there are further accesses in dev_err and dev_dbg statements in yurex_write() and the driver-data destructor (sic!). Fix this by unconditionally stopping also the control URB at disconnect and by using a dedicated disconnected flag. Note that we need to take a reference to the struct usb_interface to avoid a use-after-free in the destructor whenever the device was disconnected while the character device was still open. Fixes: aadd6472d904 ("USB: yurex.c: remove dbg() usage") Fixes: 45714104b9e8 ("USB: yurex.c: remove err() usage") Cc: stable <stable(a)vger.kernel.org> # 3.5: ef61eb43ada6 Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/usb/misc/yurex.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c index 8d52d4336c29..be0505b8b5d4 100644 --- a/drivers/usb/misc/yurex.c +++ b/drivers/usb/misc/yurex.c @@ -60,6 +60,7 @@ struct usb_yurex { struct kref kref; struct mutex io_mutex; + unsigned long disconnected:1; struct fasync_struct *async_queue; wait_queue_head_t waitq; @@ -107,6 +108,7 @@ static void yurex_delete(struct kref *kref) dev->int_buffer, dev->urb->transfer_dma); usb_free_urb(dev->urb); } + usb_put_intf(dev->interface); usb_put_dev(dev->udev); kfree(dev); } @@ -205,7 +207,7 @@ static int yurex_probe(struct usb_interface *interface, const struct usb_device_ init_waitqueue_head(&dev->waitq); dev->udev = usb_get_dev(interface_to_usbdev(interface)); - dev->interface = interface; + dev->interface = usb_get_intf(interface); /* set up the endpoint information */ iface_desc = interface->cur_altsetting; @@ -316,8 +318,9 @@ static void yurex_disconnect(struct usb_interface *interface) /* prevent more I/O from starting */ usb_poison_urb(dev->urb); + usb_poison_urb(dev->cntl_urb); mutex_lock(&dev->io_mutex); - dev->interface = NULL; + dev->disconnected = 1; mutex_unlock(&dev->io_mutex); /* wakeup waiters */ @@ -405,7 +408,7 @@ static ssize_t yurex_read(struct file *file, char __user *buffer, size_t count, dev = file->private_data; mutex_lock(&dev->io_mutex); - if (!dev->interface) { /* already disconnected */ + if (dev->disconnected) { /* already disconnected */ mutex_unlock(&dev->io_mutex); return -ENODEV; } @@ -440,7 +443,7 @@ static ssize_t yurex_write(struct file *file, const char __user *user_buffer, goto error; mutex_lock(&dev->io_mutex); - if (!dev->interface) { /* already disconnected */ + if (dev->disconnected) { /* already disconnected */ mutex_unlock(&dev->io_mutex); retval = -ENODEV; goto error; -- 2.23.0

5 years, 3 months

2
2
0 0

[PATCH 12/29] can: rx-offload: can_rx_offload_queue_sorted(): fix error handling, avoid skb mem leak

by Marc Kleine-Budde

If the rx-offload skb_queue is full can_rx_offload_queue_sorted() will not queue the skb and return with an error. None of the callers of this function, issue a kfree_skb() to free the not queued skb. This results in a memory leak. This patch fixes the problem by freeing the skb in case of a full queue. The return value is adjusted to -ENOBUFS to better reflect the actual problem. The device stats handling is left to the callers, as this function mightbe used in both the rx and tx path. Fixes: 55059f2b7f86 ("can: rx-offload: introduce can_rx_offload_get_echo_skb() and can_rx_offload_queue_sorted() functions") Cc: linux-stable <stable(a)vger.kernel.org> Cc: Martin Hundebøll <martin(a)geanix.com> Reported-by: Martin Hundebøll <martin(a)geanix.com> Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> --- drivers/net/can/rx-offload.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/can/rx-offload.c b/drivers/net/can/rx-offload.c index e6a668ee7730..663697439d1c 100644 --- a/drivers/net/can/rx-offload.c +++ b/drivers/net/can/rx-offload.c @@ -207,8 +207,10 @@ int can_rx_offload_queue_sorted(struct can_rx_offload *offload, unsigned long flags; if (skb_queue_len(&offload->skb_queue) > - offload->skb_queue_len_max) - return -ENOMEM; + offload->skb_queue_len_max) { + kfree_skb(skb); + return -ENOBUFS; + } cb = can_rx_offload_get_cb(skb); cb->timestamp = timestamp; -- 2.23.0

5 years, 3 months

1
0
0 0

[PATCH 08/29] can: c_can: c_can_poll(): only read status register after status IRQ

by Marc Kleine-Budde

From: Kurt Van Dijck <dev.kurt(a)vandijck-laurijssen.be> When the status register is read without the status IRQ pending, the chip may not raise the interrupt line for an upcoming status interrupt and the driver may miss a status interrupt. It is critical that the BUSOFF status interrupt is forwarded to the higher layers, since no more interrupts will follow without intervention. Thanks to Wolfgang and Joe for bringing up the first idea. Signed-off-by: Kurt Van Dijck <dev.kurt(a)vandijck-laurijssen.be> Cc: Wolfgang Grandegger <wg(a)grandegger.com> Cc: Joe Burmeister <joe.burmeister(a)devtank.co.uk> Fixes: fa39b54ccf28 ("can: c_can: Get rid of pointless interrupts") Cc: linux-stable <stable(a)vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> --- drivers/net/can/c_can/c_can.c | 25 ++++++++++++++++++++----- drivers/net/can/c_can/c_can.h | 1 + 2 files changed, 21 insertions(+), 5 deletions(-) diff --git a/drivers/net/can/c_can/c_can.c b/drivers/net/can/c_can/c_can.c index 606b7d8ffe13..9b61bfbea6cd 100644 --- a/drivers/net/can/c_can/c_can.c +++ b/drivers/net/can/c_can/c_can.c @@ -97,6 +97,9 @@ #define BTR_TSEG2_SHIFT 12 #define BTR_TSEG2_MASK (0x7 << BTR_TSEG2_SHIFT) +/* interrupt register */ +#define INT_STS_PENDING 0x8000 + /* brp extension register */ #define BRP_EXT_BRPE_MASK 0x0f #define BRP_EXT_BRPE_SHIFT 0 @@ -1029,10 +1032,16 @@ static int c_can_poll(struct napi_struct *napi, int quota) u16 curr, last = priv->last_status; int work_done = 0; - priv->last_status = curr = priv->read_reg(priv, C_CAN_STS_REG); - /* Ack status on C_CAN. D_CAN is self clearing */ - if (priv->type != BOSCH_D_CAN) - priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED); + /* Only read the status register if a status interrupt was pending */ + if (atomic_xchg(&priv->sie_pending, 0)) { + priv->last_status = curr = priv->read_reg(priv, C_CAN_STS_REG); + /* Ack status on C_CAN. D_CAN is self clearing */ + if (priv->type != BOSCH_D_CAN) + priv->write_reg(priv, C_CAN_STS_REG, LEC_UNUSED); + } else { + /* no change detected ... */ + curr = last; + } /* handle state changes */ if ((curr & STATUS_EWARN) && (!(last & STATUS_EWARN))) { @@ -1083,10 +1092,16 @@ static irqreturn_t c_can_isr(int irq, void *dev_id) { struct net_device *dev = (struct net_device *)dev_id; struct c_can_priv *priv = netdev_priv(dev); + int reg_int; - if (!priv->read_reg(priv, C_CAN_INT_REG)) + reg_int = priv->read_reg(priv, C_CAN_INT_REG); + if (!reg_int) return IRQ_NONE; + /* save for later use */ + if (reg_int & INT_STS_PENDING) + atomic_set(&priv->sie_pending, 1); + /* disable all interrupts and schedule the NAPI */ c_can_irq_control(priv, false); napi_schedule(&priv->napi); diff --git a/drivers/net/can/c_can/c_can.h b/drivers/net/can/c_can/c_can.h index 8acdc7fa4792..d5567a7c1c6d 100644 --- a/drivers/net/can/c_can/c_can.h +++ b/drivers/net/can/c_can/c_can.h @@ -198,6 +198,7 @@ struct c_can_priv { struct net_device *dev; struct device *device; atomic_t tx_active; + atomic_t sie_pending; unsigned long tx_dir; int last_status; u16 (*read_reg) (const struct c_can_priv *priv, enum reg index); -- 2.23.0

5 years, 3 months

1
0
0 0

[PATCH 06/29] can: peak_usb: fix a potential out-of-sync while decoding packets

by Marc Kleine-Budde

From: Stephane Grosjean <s.grosjean(a)peak-system.com> When decoding a buffer received from PCAN-USB, the first timestamp read in a packet is a 16-bit coded time base, and the next ones are an 8-bit offset to this base, regardless of the type of packet read. This patch corrects a potential loss of synchronization by using a timestamp index read from the buffer, rather than an index of received data packets, to determine on the sizeof the timestamp to be read from the packet being decoded. Signed-off-by: Stephane Grosjean <s.grosjean(a)peak-system.com> Fixes: 46be265d3388 ("can: usb: PEAK-System Technik PCAN-USB specific part") Cc: linux-stable <stable(a)vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> --- drivers/net/can/usb/peak_usb/pcan_usb.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) diff --git a/drivers/net/can/usb/peak_usb/pcan_usb.c b/drivers/net/can/usb/peak_usb/pcan_usb.c index 617da295b6c1..5a66c9f53aae 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb.c @@ -100,7 +100,7 @@ struct pcan_usb_msg_context { u8 *end; u8 rec_cnt; u8 rec_idx; - u8 rec_data_idx; + u8 rec_ts_idx; struct net_device *netdev; struct pcan_usb *pdev; }; @@ -547,10 +547,15 @@ static int pcan_usb_decode_status(struct pcan_usb_msg_context *mc, mc->ptr += PCAN_USB_CMD_ARGS; if (status_len & PCAN_USB_STATUSLEN_TIMESTAMP) { - int err = pcan_usb_decode_ts(mc, !mc->rec_idx); + int err = pcan_usb_decode_ts(mc, !mc->rec_ts_idx); if (err) return err; + + /* Next packet in the buffer will have a timestamp on a single + * byte + */ + mc->rec_ts_idx++; } switch (f) { @@ -632,10 +637,13 @@ static int pcan_usb_decode_data(struct pcan_usb_msg_context *mc, u8 status_len) cf->can_dlc = get_can_dlc(rec_len); - /* first data packet timestamp is a word */ - if (pcan_usb_decode_ts(mc, !mc->rec_data_idx)) + /* Only first packet timestamp is a word */ + if (pcan_usb_decode_ts(mc, !mc->rec_ts_idx)) goto decode_failed; + /* Next packet in the buffer will have a timestamp on a single byte */ + mc->rec_ts_idx++; + /* read data */ memset(cf->data, 0x0, sizeof(cf->data)); if (status_len & PCAN_USB_STATUSLEN_RTR) { @@ -688,7 +696,6 @@ static int pcan_usb_decode_msg(struct peak_usb_device *dev, u8 *ibuf, u32 lbuf) /* handle normal can frames here */ } else { err = pcan_usb_decode_data(&mc, sl); - mc.rec_data_idx++; } } -- 2.23.0

5 years, 3 months

1
0
0 0

[PATCH 05/29] can: flexcan: disable completely the ECC mechanism

by Marc Kleine-Budde

From: Joakim Zhang <qiangqing.zhang(a)nxp.com> The ECC (memory error detection and correction) mechanism can be activated or not, controlled by the ECCDIS bit in CAN_MECR. When disabled, updates on indications and reporting registers are stopped. So if want to disable ECC completely, had better assert ECCDIS bit, not just mask the related interrupts. Fixes: cdce844865be ("can: flexcan: add vf610 support for FlexCAN") Signed-off-by: Joakim Zhang <qiangqing.zhang(a)nxp.com> Cc: linux-stable <stable(a)vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> --- drivers/net/can/flexcan.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index dc5695dffc2e..1cd5179cb876 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -1188,6 +1188,7 @@ static int flexcan_chip_start(struct net_device *dev) reg_mecr = priv->read(&regs->mecr); reg_mecr &= ~FLEXCAN_MECR_ECRWRDIS; priv->write(reg_mecr, &regs->mecr); + reg_mecr |= FLEXCAN_MECR_ECCDIS; reg_mecr &= ~(FLEXCAN_MECR_NCEFAFRZ | FLEXCAN_MECR_HANCEI_MSK | FLEXCAN_MECR_FANCEI_MSK); priv->write(reg_mecr, &regs->mecr); -- 2.23.0

5 years, 3 months

1
0
0 0

[PATCH 04/29] can: usb_8dev: fix use-after-free on disconnect

by Marc Kleine-Budde

From: Johan Hovold <johan(a)kernel.org> The driver was accessing its driver data after having freed it. Fixes: 0024d8ad1639 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices") Cc: stable <stable(a)vger.kernel.org> # 3.9 Cc: Bernd Krumboeck <b.krumboeck(a)gmail.com> Cc: Wolfgang Grandegger <wg(a)grandegger.com> Signed-off-by: Johan Hovold <johan(a)kernel.org> Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> --- drivers/net/can/usb/usb_8dev.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/can/usb/usb_8dev.c b/drivers/net/can/usb/usb_8dev.c index d596a2ad7f78..8fa224b28218 100644 --- a/drivers/net/can/usb/usb_8dev.c +++ b/drivers/net/can/usb/usb_8dev.c @@ -996,9 +996,8 @@ static void usb_8dev_disconnect(struct usb_interface *intf) netdev_info(priv->netdev, "device disconnected\n"); unregister_netdev(priv->netdev); - free_candev(priv->netdev); - unlink_all_urbs(priv); + free_candev(priv->netdev); } } -- 2.23.0

5 years, 3 months

1
0
0 0

[PATCH 03/29] can: mcba_usb: fix use-after-free on disconnect

by Marc Kleine-Budde

From: Johan Hovold <johan(a)kernel.org> The driver was accessing its driver data after having freed it. Fixes: 51f3baad7de9 ("can: mcba_usb: Add support for Microchip CAN BUS Analyzer") Cc: stable <stable(a)vger.kernel.org> # 4.12 Cc: Remigiusz Kołłątaj <remigiusz.kollataj(a)mobica.com> Reported-by: syzbot+e29b17e5042bbc56fae9(a)syzkaller.appspotmail.com Signed-off-by: Johan Hovold <johan(a)kernel.org> Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> --- drivers/net/can/usb/mcba_usb.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/can/usb/mcba_usb.c b/drivers/net/can/usb/mcba_usb.c index 19a702ac49e4..21faa2ec4632 100644 --- a/drivers/net/can/usb/mcba_usb.c +++ b/drivers/net/can/usb/mcba_usb.c @@ -876,9 +876,8 @@ static void mcba_usb_disconnect(struct usb_interface *intf) netdev_info(priv->netdev, "device disconnected\n"); unregister_candev(priv->netdev); - free_candev(priv->netdev); - mcba_urb_unlink(priv); + free_candev(priv->netdev); } static struct usb_driver mcba_usb_driver = { -- 2.23.0

5 years, 3 months

1
0
0 0

[PATCH 02/29] can: gs_usb: gs_can_open(): prevent memory leak

by Marc Kleine-Budde

From: Navid Emamdoost <navid.emamdoost(a)gmail.com> In gs_can_open() if usb_submit_urb() fails the allocated urb should be released. Fixes: d08e973a77d1 ("can: gs_usb: Added support for the GS_USB CAN devices") Cc: linux-stable <stable(a)vger.kernel.org> Signed-off-by: Navid Emamdoost <navid.emamdoost(a)gmail.com> Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> --- drivers/net/can/usb/gs_usb.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/can/usb/gs_usb.c b/drivers/net/can/usb/gs_usb.c index bd6eb9967630..2f74f6704c12 100644 --- a/drivers/net/can/usb/gs_usb.c +++ b/drivers/net/can/usb/gs_usb.c @@ -623,6 +623,7 @@ static int gs_can_open(struct net_device *netdev) rc); usb_unanchor_urb(urb); + usb_free_urb(urb); break; } -- 2.23.0

5 years, 3 months

1
0
0 0

[PATCH 01/29] can: dev: add missing of_node_put() after calling of_get_child_by_name()

by Marc Kleine-Budde

From: Wen Yang <wenyang(a)linux.alibaba.com> of_node_put() needs to be called when the device node which is got from of_get_child_by_name() finished using. Fixes: 2290aefa2e90 ("can: dev: Add support for limiting configured bitrate") Cc: Franklin S Cooper Jr <fcooper(a)ti.com> Signed-off-by: Wen Yang <wenyang(a)linux.alibaba.com> Cc: linux-stable <stable(a)vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl(a)pengutronix.de> --- drivers/net/can/dev.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index ac86be52b461..1c88c361938c 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -848,6 +848,7 @@ void of_can_transceiver(struct net_device *dev) return; ret = of_property_read_u32(dn, "max-bitrate", &priv->bitrate_max); + of_node_put(dn); if ((ret && ret != -EINVAL) || (!ret && !priv->bitrate_max)) netdev_warn(dev, "Invalid value for transceiver max bitrate. Ignoring bitrate limit.\n"); } -- 2.23.0

5 years, 3 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror October 2019