October 2019 - Linux-stable-mirror

FAILED: patch "[PATCH] staging: erofs: avoid endless loop of invalid lookback" failed to apply to 5.2-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.2-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 598bb8913d015150b7734b55443c0e53e7189fc7 Mon Sep 17 00:00:00 2001 From: Gao Xiang <gaoxiang25(a)huawei.com> Date: Mon, 19 Aug 2019 18:34:26 +0800 Subject: [PATCH] staging: erofs: avoid endless loop of invalid lookback distance 0 As reported by erofs-utils fuzzer, Lookback distance should be a positive number, so it should be actually looked back rather than spinning. Fixes: 02827e1796b3 ("staging: erofs: add erofs_map_blocks_iter") Cc: <stable(a)vger.kernel.org> # 4.19+ Signed-off-by: Gao Xiang <gaoxiang25(a)huawei.com> Reviewed-by: Chao Yu <yuchao0(a)huawei.com> Link: https://lore.kernel.org/r/20190819103426.87579-7-gaoxiang25@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/staging/erofs/zmap.c b/drivers/staging/erofs/zmap.c index 7408e86823a4..774dacbc5b32 100644 --- a/drivers/staging/erofs/zmap.c +++ b/drivers/staging/erofs/zmap.c @@ -350,6 +350,12 @@ static int vle_extent_lookback(struct z_erofs_maprecorder *m, switch (m->type) { case Z_EROFS_VLE_CLUSTER_TYPE_NONHEAD: + if (unlikely(!m->delta[0])) { + errln("invalid lookback distance 0 at nid %llu", + vi->nid); + DBG_BUGON(1); + return -EFSCORRUPTED; + } return vle_extent_lookback(m, m->delta[0]); case Z_EROFS_VLE_CLUSTER_TYPE_PLAIN: map->m_flags &= ~EROFS_MAP_ZIPPED;

5 years, 2 months

1
0
0 0

FAILED: patch "[PATCH] staging: erofs: avoid endless loop of invalid lookback" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 598bb8913d015150b7734b55443c0e53e7189fc7 Mon Sep 17 00:00:00 2001 From: Gao Xiang <gaoxiang25(a)huawei.com> Date: Mon, 19 Aug 2019 18:34:26 +0800 Subject: [PATCH] staging: erofs: avoid endless loop of invalid lookback distance 0 As reported by erofs-utils fuzzer, Lookback distance should be a positive number, so it should be actually looked back rather than spinning. Fixes: 02827e1796b3 ("staging: erofs: add erofs_map_blocks_iter") Cc: <stable(a)vger.kernel.org> # 4.19+ Signed-off-by: Gao Xiang <gaoxiang25(a)huawei.com> Reviewed-by: Chao Yu <yuchao0(a)huawei.com> Link: https://lore.kernel.org/r/20190819103426.87579-7-gaoxiang25@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> diff --git a/drivers/staging/erofs/zmap.c b/drivers/staging/erofs/zmap.c index 7408e86823a4..774dacbc5b32 100644 --- a/drivers/staging/erofs/zmap.c +++ b/drivers/staging/erofs/zmap.c @@ -350,6 +350,12 @@ static int vle_extent_lookback(struct z_erofs_maprecorder *m, switch (m->type) { case Z_EROFS_VLE_CLUSTER_TYPE_NONHEAD: + if (unlikely(!m->delta[0])) { + errln("invalid lookback distance 0 at nid %llu", + vi->nid); + DBG_BUGON(1); + return -EFSCORRUPTED; + } return vle_extent_lookback(m, m->delta[0]); case Z_EROFS_VLE_CLUSTER_TYPE_PLAIN: map->m_flags &= ~EROFS_MAP_ZIPPED;

5 years, 2 months

1
0
0 0

[PATCH] USB: microtek: fix info-leak at probe

by Johan Hovold

Add missing bulk-in endpoint sanity check to prevent uninitialised stack data from being reported to the system log and used as endpoint addresses. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <stable(a)vger.kernel.org> Reported-by: syzbot+5630ca7c3b2be5c9da5e(a)syzkaller.appspotmail.com Signed-off-by: Johan Hovold <johan(a)kernel.org> --- drivers/usb/image/microtek.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/image/microtek.c b/drivers/usb/image/microtek.c index 0a57c2cc8e5a..7a6b122c833f 100644 --- a/drivers/usb/image/microtek.c +++ b/drivers/usb/image/microtek.c @@ -716,6 +716,10 @@ static int mts_usb_probe(struct usb_interface *intf, } + if (ep_in_current != &ep_in_set[2]) { + MTS_WARNING("couldn't find two input bulk endpoints. Bailing out.\n"); + return -ENODEV; + } if ( ep_out == -1 ) { MTS_WARNING( "couldn't find an output bulk endpoint. Bailing out.\n" ); -- 2.23.0

5 years, 2 months

2
1
0 0

[PATCH 4.14] x86/retpolines: Fix up backport of a9d57ef15cbe

by Nathan Chancellor

Commit a9d57ef15cbe ("x86/retpolines: Disable switch jump tables when retpolines are enabled") added -fno-jump-tables to workaround a GCC issue while deliberately avoiding adding this flag when CONFIG_CC_IS_CLANG is set, which is defined by the kconfig system when CC=clang is provided. However, this symbol was added in 4.18 in commit 469cb7376c06 ("kconfig: add CC_IS_CLANG and CLANG_VERSION") so it is always undefined in 4.14, meaning -fno-jump-tables gets added when using Clang. Fix this up by using the equivalent $(cc-name) comparison, which matches what upstream did until commit 076f421da5d4 ("kbuild: replace cc-name test with CONFIG_CC_IS_CLANG"). Fixes: e28951100515 ("x86/retpolines: Disable switch jump tables when retpolines are enabled") Signed-off-by: Nathan Chancellor <natechancellor(a)gmail.com> --- arch/x86/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/Makefile b/arch/x86/Makefile index cd596ca60901..3dc54d2f79c4 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -249,7 +249,7 @@ ifdef CONFIG_RETPOLINE # retpoline builds, however, gcc does not for x86. This has # only been fixed starting from gcc stable version 8.4.0 and # onwards, but not for older ones. See gcc bug #86952. - ifndef CONFIG_CC_IS_CLANG + ifneq ($(cc-name), clang) KBUILD_CFLAGS += $(call cc-option,-fno-jump-tables) endif endif -- 2.23.0

5 years, 2 months

2
1
0 0

FAILED: patch "[PATCH] md/raid0: avoid RAID0 data corruption due to layout" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From c84a1372df929033cb1a0441fb57bd3932f39ac9 Mon Sep 17 00:00:00 2001 From: NeilBrown <neilb(a)suse.de> Date: Mon, 9 Sep 2019 16:30:02 +1000 Subject: [PATCH] md/raid0: avoid RAID0 data corruption due to layout confusion. If the drives in a RAID0 are not all the same size, the array is divided into zones. The first zone covers all drives, to the size of the smallest. The second zone covers all drives larger than the smallest, up to the size of the second smallest - etc. A change in Linux 3.14 unintentionally changed the layout for the second and subsequent zones. All the correct data is still stored, but each chunk may be assigned to a different device than in pre-3.14 kernels. This can lead to data corruption. It is not possible to determine what layout to use - it depends which kernel the data was written by. So we add a module parameter to allow the old (0) or new (1) layout to be specified, and refused to assemble an affected array if that parameter is not set. Fixes: 20d0189b1012 ("block: Introduce new bio_split()") cc: stable(a)vger.kernel.org (3.14+) Acked-by: Guoqing Jiang <guoqing.jiang(a)cloud.ionos.com> Signed-off-by: NeilBrown <neilb(a)suse.de> Signed-off-by: Song Liu <songliubraving(a)fb.com> diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c index bc422eae2c95..ec611abda835 100644 --- a/drivers/md/raid0.c +++ b/drivers/md/raid0.c @@ -19,6 +19,9 @@ #include "raid0.h" #include "raid5.h" +static int default_layout = 0; +module_param(default_layout, int, 0644); + #define UNSUPPORTED_MDDEV_FLAGS \ ((1L << MD_HAS_JOURNAL) | \ (1L << MD_JOURNAL_CLEAN) | \ @@ -139,6 +142,19 @@ static int create_strip_zones(struct mddev *mddev, struct r0conf **private_conf) } pr_debug("md/raid0:%s: FINAL %d zones\n", mdname(mddev), conf->nr_strip_zones); + + if (conf->nr_strip_zones == 1) { + conf->layout = RAID0_ORIG_LAYOUT; + } else if (default_layout == RAID0_ORIG_LAYOUT || + default_layout == RAID0_ALT_MULTIZONE_LAYOUT) { + conf->layout = default_layout; + } else { + pr_err("md/raid0:%s: cannot assemble multi-zone RAID0 with default_layout setting\n", + mdname(mddev)); + pr_err("md/raid0: please set raid.default_layout to 1 or 2\n"); + err = -ENOTSUPP; + goto abort; + } /* * now since we have the hard sector sizes, we can make sure * chunk size is a multiple of that sector size @@ -547,10 +563,12 @@ static void raid0_handle_discard(struct mddev *mddev, struct bio *bio) static bool raid0_make_request(struct mddev *mddev, struct bio *bio) { + struct r0conf *conf = mddev->private; struct strip_zone *zone; struct md_rdev *tmp_dev; sector_t bio_sector; sector_t sector; + sector_t orig_sector; unsigned chunk_sects; unsigned sectors; @@ -584,8 +602,20 @@ static bool raid0_make_request(struct mddev *mddev, struct bio *bio) bio = split; } + orig_sector = sector; zone = find_zone(mddev->private, &sector); - tmp_dev = map_sector(mddev, zone, sector, &sector); + switch (conf->layout) { + case RAID0_ORIG_LAYOUT: + tmp_dev = map_sector(mddev, zone, orig_sector, &sector); + break; + case RAID0_ALT_MULTIZONE_LAYOUT: + tmp_dev = map_sector(mddev, zone, sector, &sector); + break; + default: + WARN("md/raid0:%s: Invalid layout\n", mdname(mddev)); + bio_io_error(bio); + return true; + } if (unlikely(is_mddev_broken(tmp_dev, "raid0"))) { bio_io_error(bio); diff --git a/drivers/md/raid0.h b/drivers/md/raid0.h index 540e65d92642..3816e5477db1 100644 --- a/drivers/md/raid0.h +++ b/drivers/md/raid0.h @@ -8,11 +8,25 @@ struct strip_zone { int nb_dev; /* # of devices attached to the zone */ }; +/* Linux 3.14 (20d0189b101) made an unintended change to + * the RAID0 layout for multi-zone arrays (where devices aren't all + * the same size. + * RAID0_ORIG_LAYOUT restores the original layout + * RAID0_ALT_MULTIZONE_LAYOUT uses the altered layout + * The layouts are identical when there is only one zone (all + * devices the same size). + */ + +enum r0layout { + RAID0_ORIG_LAYOUT = 1, + RAID0_ALT_MULTIZONE_LAYOUT = 2, +}; struct r0conf { struct strip_zone *strip_zone; struct md_rdev **devlist; /* lists of rdevs, pointed to * by strip_zone->dev */ int nr_strip_zones; + enum r0layout layout; }; #endif

5 years, 2 months

1
0
0 0

FAILED: patch "[PATCH] md/raid0: avoid RAID0 data corruption due to layout" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From c84a1372df929033cb1a0441fb57bd3932f39ac9 Mon Sep 17 00:00:00 2001 From: NeilBrown <neilb(a)suse.de> Date: Mon, 9 Sep 2019 16:30:02 +1000 Subject: [PATCH] md/raid0: avoid RAID0 data corruption due to layout confusion. If the drives in a RAID0 are not all the same size, the array is divided into zones. The first zone covers all drives, to the size of the smallest. The second zone covers all drives larger than the smallest, up to the size of the second smallest - etc. A change in Linux 3.14 unintentionally changed the layout for the second and subsequent zones. All the correct data is still stored, but each chunk may be assigned to a different device than in pre-3.14 kernels. This can lead to data corruption. It is not possible to determine what layout to use - it depends which kernel the data was written by. So we add a module parameter to allow the old (0) or new (1) layout to be specified, and refused to assemble an affected array if that parameter is not set. Fixes: 20d0189b1012 ("block: Introduce new bio_split()") cc: stable(a)vger.kernel.org (3.14+) Acked-by: Guoqing Jiang <guoqing.jiang(a)cloud.ionos.com> Signed-off-by: NeilBrown <neilb(a)suse.de> Signed-off-by: Song Liu <songliubraving(a)fb.com> diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c index bc422eae2c95..ec611abda835 100644 --- a/drivers/md/raid0.c +++ b/drivers/md/raid0.c @@ -19,6 +19,9 @@ #include "raid0.h" #include "raid5.h" +static int default_layout = 0; +module_param(default_layout, int, 0644); + #define UNSUPPORTED_MDDEV_FLAGS \ ((1L << MD_HAS_JOURNAL) | \ (1L << MD_JOURNAL_CLEAN) | \ @@ -139,6 +142,19 @@ static int create_strip_zones(struct mddev *mddev, struct r0conf **private_conf) } pr_debug("md/raid0:%s: FINAL %d zones\n", mdname(mddev), conf->nr_strip_zones); + + if (conf->nr_strip_zones == 1) { + conf->layout = RAID0_ORIG_LAYOUT; + } else if (default_layout == RAID0_ORIG_LAYOUT || + default_layout == RAID0_ALT_MULTIZONE_LAYOUT) { + conf->layout = default_layout; + } else { + pr_err("md/raid0:%s: cannot assemble multi-zone RAID0 with default_layout setting\n", + mdname(mddev)); + pr_err("md/raid0: please set raid.default_layout to 1 or 2\n"); + err = -ENOTSUPP; + goto abort; + } /* * now since we have the hard sector sizes, we can make sure * chunk size is a multiple of that sector size @@ -547,10 +563,12 @@ static void raid0_handle_discard(struct mddev *mddev, struct bio *bio) static bool raid0_make_request(struct mddev *mddev, struct bio *bio) { + struct r0conf *conf = mddev->private; struct strip_zone *zone; struct md_rdev *tmp_dev; sector_t bio_sector; sector_t sector; + sector_t orig_sector; unsigned chunk_sects; unsigned sectors; @@ -584,8 +602,20 @@ static bool raid0_make_request(struct mddev *mddev, struct bio *bio) bio = split; } + orig_sector = sector; zone = find_zone(mddev->private, &sector); - tmp_dev = map_sector(mddev, zone, sector, &sector); + switch (conf->layout) { + case RAID0_ORIG_LAYOUT: + tmp_dev = map_sector(mddev, zone, orig_sector, &sector); + break; + case RAID0_ALT_MULTIZONE_LAYOUT: + tmp_dev = map_sector(mddev, zone, sector, &sector); + break; + default: + WARN("md/raid0:%s: Invalid layout\n", mdname(mddev)); + bio_io_error(bio); + return true; + } if (unlikely(is_mddev_broken(tmp_dev, "raid0"))) { bio_io_error(bio); diff --git a/drivers/md/raid0.h b/drivers/md/raid0.h index 540e65d92642..3816e5477db1 100644 --- a/drivers/md/raid0.h +++ b/drivers/md/raid0.h @@ -8,11 +8,25 @@ struct strip_zone { int nb_dev; /* # of devices attached to the zone */ }; +/* Linux 3.14 (20d0189b101) made an unintended change to + * the RAID0 layout for multi-zone arrays (where devices aren't all + * the same size. + * RAID0_ORIG_LAYOUT restores the original layout + * RAID0_ALT_MULTIZONE_LAYOUT uses the altered layout + * The layouts are identical when there is only one zone (all + * devices the same size). + */ + +enum r0layout { + RAID0_ORIG_LAYOUT = 1, + RAID0_ALT_MULTIZONE_LAYOUT = 2, +}; struct r0conf { struct strip_zone *strip_zone; struct md_rdev **devlist; /* lists of rdevs, pointed to * by strip_zone->dev */ int nr_strip_zones; + enum r0layout layout; }; #endif

5 years, 2 months

1
0
0 0

FAILED: patch "[PATCH] md/raid0: avoid RAID0 data corruption due to layout" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From c84a1372df929033cb1a0441fb57bd3932f39ac9 Mon Sep 17 00:00:00 2001 From: NeilBrown <neilb(a)suse.de> Date: Mon, 9 Sep 2019 16:30:02 +1000 Subject: [PATCH] md/raid0: avoid RAID0 data corruption due to layout confusion. If the drives in a RAID0 are not all the same size, the array is divided into zones. The first zone covers all drives, to the size of the smallest. The second zone covers all drives larger than the smallest, up to the size of the second smallest - etc. A change in Linux 3.14 unintentionally changed the layout for the second and subsequent zones. All the correct data is still stored, but each chunk may be assigned to a different device than in pre-3.14 kernels. This can lead to data corruption. It is not possible to determine what layout to use - it depends which kernel the data was written by. So we add a module parameter to allow the old (0) or new (1) layout to be specified, and refused to assemble an affected array if that parameter is not set. Fixes: 20d0189b1012 ("block: Introduce new bio_split()") cc: stable(a)vger.kernel.org (3.14+) Acked-by: Guoqing Jiang <guoqing.jiang(a)cloud.ionos.com> Signed-off-by: NeilBrown <neilb(a)suse.de> Signed-off-by: Song Liu <songliubraving(a)fb.com> diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c index bc422eae2c95..ec611abda835 100644 --- a/drivers/md/raid0.c +++ b/drivers/md/raid0.c @@ -19,6 +19,9 @@ #include "raid0.h" #include "raid5.h" +static int default_layout = 0; +module_param(default_layout, int, 0644); + #define UNSUPPORTED_MDDEV_FLAGS \ ((1L << MD_HAS_JOURNAL) | \ (1L << MD_JOURNAL_CLEAN) | \ @@ -139,6 +142,19 @@ static int create_strip_zones(struct mddev *mddev, struct r0conf **private_conf) } pr_debug("md/raid0:%s: FINAL %d zones\n", mdname(mddev), conf->nr_strip_zones); + + if (conf->nr_strip_zones == 1) { + conf->layout = RAID0_ORIG_LAYOUT; + } else if (default_layout == RAID0_ORIG_LAYOUT || + default_layout == RAID0_ALT_MULTIZONE_LAYOUT) { + conf->layout = default_layout; + } else { + pr_err("md/raid0:%s: cannot assemble multi-zone RAID0 with default_layout setting\n", + mdname(mddev)); + pr_err("md/raid0: please set raid.default_layout to 1 or 2\n"); + err = -ENOTSUPP; + goto abort; + } /* * now since we have the hard sector sizes, we can make sure * chunk size is a multiple of that sector size @@ -547,10 +563,12 @@ static void raid0_handle_discard(struct mddev *mddev, struct bio *bio) static bool raid0_make_request(struct mddev *mddev, struct bio *bio) { + struct r0conf *conf = mddev->private; struct strip_zone *zone; struct md_rdev *tmp_dev; sector_t bio_sector; sector_t sector; + sector_t orig_sector; unsigned chunk_sects; unsigned sectors; @@ -584,8 +602,20 @@ static bool raid0_make_request(struct mddev *mddev, struct bio *bio) bio = split; } + orig_sector = sector; zone = find_zone(mddev->private, &sector); - tmp_dev = map_sector(mddev, zone, sector, &sector); + switch (conf->layout) { + case RAID0_ORIG_LAYOUT: + tmp_dev = map_sector(mddev, zone, orig_sector, &sector); + break; + case RAID0_ALT_MULTIZONE_LAYOUT: + tmp_dev = map_sector(mddev, zone, sector, &sector); + break; + default: + WARN("md/raid0:%s: Invalid layout\n", mdname(mddev)); + bio_io_error(bio); + return true; + } if (unlikely(is_mddev_broken(tmp_dev, "raid0"))) { bio_io_error(bio); diff --git a/drivers/md/raid0.h b/drivers/md/raid0.h index 540e65d92642..3816e5477db1 100644 --- a/drivers/md/raid0.h +++ b/drivers/md/raid0.h @@ -8,11 +8,25 @@ struct strip_zone { int nb_dev; /* # of devices attached to the zone */ }; +/* Linux 3.14 (20d0189b101) made an unintended change to + * the RAID0 layout for multi-zone arrays (where devices aren't all + * the same size. + * RAID0_ORIG_LAYOUT restores the original layout + * RAID0_ALT_MULTIZONE_LAYOUT uses the altered layout + * The layouts are identical when there is only one zone (all + * devices the same size). + */ + +enum r0layout { + RAID0_ORIG_LAYOUT = 1, + RAID0_ALT_MULTIZONE_LAYOUT = 2, +}; struct r0conf { struct strip_zone *strip_zone; struct md_rdev **devlist; /* lists of rdevs, pointed to * by strip_zone->dev */ int nr_strip_zones; + enum r0layout layout; }; #endif

5 years, 2 months

1
0
0 0

FAILED: patch "[PATCH] md/raid0: avoid RAID0 data corruption due to layout" failed to apply to 5.2-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 5.2-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From c84a1372df929033cb1a0441fb57bd3932f39ac9 Mon Sep 17 00:00:00 2001 From: NeilBrown <neilb(a)suse.de> Date: Mon, 9 Sep 2019 16:30:02 +1000 Subject: [PATCH] md/raid0: avoid RAID0 data corruption due to layout confusion. If the drives in a RAID0 are not all the same size, the array is divided into zones. The first zone covers all drives, to the size of the smallest. The second zone covers all drives larger than the smallest, up to the size of the second smallest - etc. A change in Linux 3.14 unintentionally changed the layout for the second and subsequent zones. All the correct data is still stored, but each chunk may be assigned to a different device than in pre-3.14 kernels. This can lead to data corruption. It is not possible to determine what layout to use - it depends which kernel the data was written by. So we add a module parameter to allow the old (0) or new (1) layout to be specified, and refused to assemble an affected array if that parameter is not set. Fixes: 20d0189b1012 ("block: Introduce new bio_split()") cc: stable(a)vger.kernel.org (3.14+) Acked-by: Guoqing Jiang <guoqing.jiang(a)cloud.ionos.com> Signed-off-by: NeilBrown <neilb(a)suse.de> Signed-off-by: Song Liu <songliubraving(a)fb.com> diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c index bc422eae2c95..ec611abda835 100644 --- a/drivers/md/raid0.c +++ b/drivers/md/raid0.c @@ -19,6 +19,9 @@ #include "raid0.h" #include "raid5.h" +static int default_layout = 0; +module_param(default_layout, int, 0644); + #define UNSUPPORTED_MDDEV_FLAGS \ ((1L << MD_HAS_JOURNAL) | \ (1L << MD_JOURNAL_CLEAN) | \ @@ -139,6 +142,19 @@ static int create_strip_zones(struct mddev *mddev, struct r0conf **private_conf) } pr_debug("md/raid0:%s: FINAL %d zones\n", mdname(mddev), conf->nr_strip_zones); + + if (conf->nr_strip_zones == 1) { + conf->layout = RAID0_ORIG_LAYOUT; + } else if (default_layout == RAID0_ORIG_LAYOUT || + default_layout == RAID0_ALT_MULTIZONE_LAYOUT) { + conf->layout = default_layout; + } else { + pr_err("md/raid0:%s: cannot assemble multi-zone RAID0 with default_layout setting\n", + mdname(mddev)); + pr_err("md/raid0: please set raid.default_layout to 1 or 2\n"); + err = -ENOTSUPP; + goto abort; + } /* * now since we have the hard sector sizes, we can make sure * chunk size is a multiple of that sector size @@ -547,10 +563,12 @@ static void raid0_handle_discard(struct mddev *mddev, struct bio *bio) static bool raid0_make_request(struct mddev *mddev, struct bio *bio) { + struct r0conf *conf = mddev->private; struct strip_zone *zone; struct md_rdev *tmp_dev; sector_t bio_sector; sector_t sector; + sector_t orig_sector; unsigned chunk_sects; unsigned sectors; @@ -584,8 +602,20 @@ static bool raid0_make_request(struct mddev *mddev, struct bio *bio) bio = split; } + orig_sector = sector; zone = find_zone(mddev->private, &sector); - tmp_dev = map_sector(mddev, zone, sector, &sector); + switch (conf->layout) { + case RAID0_ORIG_LAYOUT: + tmp_dev = map_sector(mddev, zone, orig_sector, &sector); + break; + case RAID0_ALT_MULTIZONE_LAYOUT: + tmp_dev = map_sector(mddev, zone, sector, &sector); + break; + default: + WARN("md/raid0:%s: Invalid layout\n", mdname(mddev)); + bio_io_error(bio); + return true; + } if (unlikely(is_mddev_broken(tmp_dev, "raid0"))) { bio_io_error(bio); diff --git a/drivers/md/raid0.h b/drivers/md/raid0.h index 540e65d92642..3816e5477db1 100644 --- a/drivers/md/raid0.h +++ b/drivers/md/raid0.h @@ -8,11 +8,25 @@ struct strip_zone { int nb_dev; /* # of devices attached to the zone */ }; +/* Linux 3.14 (20d0189b101) made an unintended change to + * the RAID0 layout for multi-zone arrays (where devices aren't all + * the same size. + * RAID0_ORIG_LAYOUT restores the original layout + * RAID0_ALT_MULTIZONE_LAYOUT uses the altered layout + * The layouts are identical when there is only one zone (all + * devices the same size). + */ + +enum r0layout { + RAID0_ORIG_LAYOUT = 1, + RAID0_ALT_MULTIZONE_LAYOUT = 2, +}; struct r0conf { struct strip_zone *strip_zone; struct md_rdev **devlist; /* lists of rdevs, pointed to * by strip_zone->dev */ int nr_strip_zones; + enum r0layout layout; }; #endif

5 years, 2 months

1
0
0 0

FAILED: patch "[PATCH] md/raid0: avoid RAID0 data corruption due to layout" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From c84a1372df929033cb1a0441fb57bd3932f39ac9 Mon Sep 17 00:00:00 2001 From: NeilBrown <neilb(a)suse.de> Date: Mon, 9 Sep 2019 16:30:02 +1000 Subject: [PATCH] md/raid0: avoid RAID0 data corruption due to layout confusion. If the drives in a RAID0 are not all the same size, the array is divided into zones. The first zone covers all drives, to the size of the smallest. The second zone covers all drives larger than the smallest, up to the size of the second smallest - etc. A change in Linux 3.14 unintentionally changed the layout for the second and subsequent zones. All the correct data is still stored, but each chunk may be assigned to a different device than in pre-3.14 kernels. This can lead to data corruption. It is not possible to determine what layout to use - it depends which kernel the data was written by. So we add a module parameter to allow the old (0) or new (1) layout to be specified, and refused to assemble an affected array if that parameter is not set. Fixes: 20d0189b1012 ("block: Introduce new bio_split()") cc: stable(a)vger.kernel.org (3.14+) Acked-by: Guoqing Jiang <guoqing.jiang(a)cloud.ionos.com> Signed-off-by: NeilBrown <neilb(a)suse.de> Signed-off-by: Song Liu <songliubraving(a)fb.com> diff --git a/drivers/md/raid0.c b/drivers/md/raid0.c index bc422eae2c95..ec611abda835 100644 --- a/drivers/md/raid0.c +++ b/drivers/md/raid0.c @@ -19,6 +19,9 @@ #include "raid0.h" #include "raid5.h" +static int default_layout = 0; +module_param(default_layout, int, 0644); + #define UNSUPPORTED_MDDEV_FLAGS \ ((1L << MD_HAS_JOURNAL) | \ (1L << MD_JOURNAL_CLEAN) | \ @@ -139,6 +142,19 @@ static int create_strip_zones(struct mddev *mddev, struct r0conf **private_conf) } pr_debug("md/raid0:%s: FINAL %d zones\n", mdname(mddev), conf->nr_strip_zones); + + if (conf->nr_strip_zones == 1) { + conf->layout = RAID0_ORIG_LAYOUT; + } else if (default_layout == RAID0_ORIG_LAYOUT || + default_layout == RAID0_ALT_MULTIZONE_LAYOUT) { + conf->layout = default_layout; + } else { + pr_err("md/raid0:%s: cannot assemble multi-zone RAID0 with default_layout setting\n", + mdname(mddev)); + pr_err("md/raid0: please set raid.default_layout to 1 or 2\n"); + err = -ENOTSUPP; + goto abort; + } /* * now since we have the hard sector sizes, we can make sure * chunk size is a multiple of that sector size @@ -547,10 +563,12 @@ static void raid0_handle_discard(struct mddev *mddev, struct bio *bio) static bool raid0_make_request(struct mddev *mddev, struct bio *bio) { + struct r0conf *conf = mddev->private; struct strip_zone *zone; struct md_rdev *tmp_dev; sector_t bio_sector; sector_t sector; + sector_t orig_sector; unsigned chunk_sects; unsigned sectors; @@ -584,8 +602,20 @@ static bool raid0_make_request(struct mddev *mddev, struct bio *bio) bio = split; } + orig_sector = sector; zone = find_zone(mddev->private, &sector); - tmp_dev = map_sector(mddev, zone, sector, &sector); + switch (conf->layout) { + case RAID0_ORIG_LAYOUT: + tmp_dev = map_sector(mddev, zone, orig_sector, &sector); + break; + case RAID0_ALT_MULTIZONE_LAYOUT: + tmp_dev = map_sector(mddev, zone, sector, &sector); + break; + default: + WARN("md/raid0:%s: Invalid layout\n", mdname(mddev)); + bio_io_error(bio); + return true; + } if (unlikely(is_mddev_broken(tmp_dev, "raid0"))) { bio_io_error(bio); diff --git a/drivers/md/raid0.h b/drivers/md/raid0.h index 540e65d92642..3816e5477db1 100644 --- a/drivers/md/raid0.h +++ b/drivers/md/raid0.h @@ -8,11 +8,25 @@ struct strip_zone { int nb_dev; /* # of devices attached to the zone */ }; +/* Linux 3.14 (20d0189b101) made an unintended change to + * the RAID0 layout for multi-zone arrays (where devices aren't all + * the same size. + * RAID0_ORIG_LAYOUT restores the original layout + * RAID0_ALT_MULTIZONE_LAYOUT uses the altered layout + * The layouts are identical when there is only one zone (all + * devices the same size). + */ + +enum r0layout { + RAID0_ORIG_LAYOUT = 1, + RAID0_ALT_MULTIZONE_LAYOUT = 2, +}; struct r0conf { struct strip_zone *strip_zone; struct md_rdev **devlist; /* lists of rdevs, pointed to * by strip_zone->dev */ int nr_strip_zones; + enum r0layout layout; }; #endif

5 years, 2 months

1
0
0 0

FAILED: patch "[PATCH] scsi: implement .cleanup_rq callback" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From b7e9e1fb7a9227be34ad4a5e778022c3164494cf Mon Sep 17 00:00:00 2001 From: Ming Lei <ming.lei(a)redhat.com> Date: Thu, 25 Jul 2019 10:05:00 +0800 Subject: [PATCH] scsi: implement .cleanup_rq callback Implement .cleanup_rq() callback for freeing driver private part of the request. Then we can avoid to leak this part if the request isn't completed by SCSI, and freed by blk-mq or upper layer(such as dm-rq) finally. Cc: Ewan D. Milne <emilne(a)redhat.com> Cc: Bart Van Assche <bvanassche(a)acm.org> Cc: Hannes Reinecke <hare(a)suse.com> Cc: Christoph Hellwig <hch(a)lst.de> Cc: Mike Snitzer <snitzer(a)redhat.com> Cc: dm-devel(a)redhat.com Cc: <stable(a)vger.kernel.org> Fixes: 396eaf21ee17 ("blk-mq: improve DM's blk-mq IO merging via blk_insert_cloned_request feedback") Signed-off-by: Ming Lei <ming.lei(a)redhat.com> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index 11e64b50497f..4e88d7e9cf9a 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -1089,6 +1089,18 @@ static void scsi_initialize_rq(struct request *rq) cmd->retries = 0; } +/* + * Only called when the request isn't completed by SCSI, and not freed by + * SCSI + */ +static void scsi_cleanup_rq(struct request *rq) +{ + if (rq->rq_flags & RQF_DONTPREP) { + scsi_mq_uninit_cmd(blk_mq_rq_to_pdu(rq)); + rq->rq_flags &= ~RQF_DONTPREP; + } +} + /* Add a command to the list used by the aacraid and dpt_i2o drivers */ void scsi_add_cmd_to_list(struct scsi_cmnd *cmd) { @@ -1821,6 +1833,7 @@ static const struct blk_mq_ops scsi_mq_ops = { .init_request = scsi_mq_init_request, .exit_request = scsi_mq_exit_request, .initialize_rq_fn = scsi_initialize_rq, + .cleanup_rq = scsi_cleanup_rq, .busy = scsi_mq_lld_busy, .map_queues = scsi_map_queues, };

5 years, 2 months

3
2
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror October 2019