September 2018 - Linux-stable-mirror

Nomination of amdgpu fixes for stable backport

by Michel Dänzer

Hi stable kernel maintainers, please squash these amdgpu fixes together and backport them to all applicable stable branches: 15e6b76880e65be24250e30986084b5569b7a06f "drm/amdgpu: Warn and update pin_size values when destroying a pinned BO" 456607d816d89a442a3d5ec98b02c8bc950b5228 "drm/amdgpu: Don't warn on destroying a pinned BO" (These depend on commits a5ccfe5c20740f2fbf00291490cdf8d2373ec255 and ddc21af4d0f37f42b33c54cb69b215997fe5b082, which already have Cc: stable) -- Earthling Michel Dänzer | http://www.amd.com Libre software enthusiast | Mesa and X developer

7 years

3
11
0 0

[PATCH stable] x86/tsc: Prevent result truncation on 32 bit

by Thomas Gleixner

Subject: x86/tsc: Prevent result truncation on 32 bit From: Chuanhua Lei <chuanhua.lei(a)linux.intel.com> Date: Thu Sep 6 18:03:23 2018 +0800 From: Chuanhua Lei <chuanhua.lei(a)linux.intel.com> Commit 17f6bac2249356c795339e03a0742cd79be3cab8 upstream. Loops per jiffy is calculated by multiplying tsc_khz with 1e3 and then dividing it by HZ. Both tsc_khz and the temporary variable holding the multiplication result are of type unsigned long, so on 32bit the result is truncated to the lower 32bit. Use u64 as type for the temporary variable and cast tsc_khz to it before multiplying. [ tglx: Backport to stable. Due to massive code changes is the upstream commit not applicable anymore. The issue has gone unnoticed in kernels pre 4.19 because the bogus LPJ value gets fixed up in a later stage of early boot, but it still might cause subtle and hard to debug issues between these two points. ] Fixes: dd759d93f4dd ("x86/timers: Add simple udelay calibration") Signed-off-by: Chuanhua Lei <chuanhua.lei(a)linux.intel.com> Signed-off-by: Thomas Gleixner <tglx(a)linutronix.de> Cc: yixin.zhu(a)linux.intel.com Cc: "H. Peter Anvin" <hpa(a)zytor.com> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Len Brown <len.brown(a)intel.com> Cc: Pavel Tatashin <pavel.tatashin(a)microsoft.com> Cc: Rajvi Jingar <rajvi.jingar(a)intel.com> Cc: Dou Liyang <douly.fnst(a)cn.fujitsu.com> Cc: Ville Syrjala <ville.syrjala(a)linux.intel.com> Link: https://lkml.kernel.org/r/1536228203-18701-1-git-send-email-chuanhua.lei@li… --- arch/x86/kernel/tsc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -1343,7 +1343,7 @@ device_initcall(init_tsc_clocksource); void __init tsc_early_delay_calibrate(void) { - unsigned long lpj; + u64 lpj; if (!boot_cpu_has(X86_FEATURE_TSC)) return; @@ -1355,7 +1355,7 @@ void __init tsc_early_delay_calibrate(vo if (!tsc_khz) return; - lpj = tsc_khz * 1000; + lpj = (u64)tsc_khz * 1000; do_div(lpj, HZ); loops_per_jiffy = lpj; }

7 years

2
1
0 0

[STABLE v4.18 BACKPORT] drm/i915: set DP Main Stream Attribute for color range on DDI platforms

by Jani Nikula

commit 6209c285e7a5e68dbcdf8fd2456c6dd68433806b upstream. Since Haswell we have no color range indication either in the pipe or port registers for DP. Instead, there's a separate register for setting the DP Main Stream Attributes (MSA) directly. The MSA register definition makes no references to colorimetry, just a vague reference to the DP spec. The connection to the color range was lost. Apparently we've failed to set the proper MSA bit for limited, or CEA, range ever since the first DDI platforms. We've started setting other MSA parameters since commit dae847991a43 ("drm/i915: add intel_ddi_set_pipe_settings"). Without the crucial bit of information, the DP sink has no way of knowing the source is actually transmitting limited range RGB, leading to "washed out" colors. With the colorimetry information, compliant sinks should be able to handle the limited range properly. Native (i.e. non-LSPCON) HDMI was not affected because we do pass the color range via AVI infoframes. Though not the root cause, the problem was made worse for DDI platforms with commit 55bc60db5988 ("drm/i915: Add "Automatic" mode for the "Broadcast RGB" property"), which selects limited range RGB automatically based on the mode, as per the DP, HDMI and CEA specs. After all these years, the fix boils down to flipping one bit. [Per testing reports, this fixes DP sinks, but not the LSPCON. My educated guess is that the LSPCON fails to turn the CEA range MSA into AVI infoframes for HDMI.] Reported-by: Michał Kopeć <mkopec12(a)gmail.com> Reported-by: N. W. <nw9165-3201(a)yahoo.com> Reported-by: Nicholas Stommel <nicholas.stommel(a)gmail.com> Reported-by: Tom Yan <tom.ty89(a)gmail.com> Tested-by: Nicholas Stommel <nicholas.stommel(a)gmail.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=100023 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107476 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94921 Cc: Paulo Zanoni <paulo.r.zanoni(a)intel.com> Cc: Rodrigo Vivi <rodrigo.vivi(a)intel.com> Cc: Ville Syrjälä <ville.syrjala(a)linux.intel.com> Cc: <stable(a)vger.kernel.org> # v3.9+ Reviewed-by: Rodrigo Vivi <rodrigo.vivi(a)intel.com> Signed-off-by: Jani Nikula <jani.nikula(a)intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180814060001.18224-1-jani.n… (cherry picked from commit dc5977da99ea28094b8fa4e9bacbd29bedc41de5) Signed-off-by: Rodrigo Vivi <rodrigo.vivi(a)intel.com> --- drivers/gpu/drm/i915/i915_reg.h | 1 + drivers/gpu/drm/i915/intel_ddi.c | 4 ++++ 2 files changed, 5 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 7720569f2024..6e048ee88e3f 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -8825,6 +8825,7 @@ enum skl_power_gate { #define TRANS_MSA_10_BPC (2<<5) #define TRANS_MSA_12_BPC (3<<5) #define TRANS_MSA_16_BPC (4<<5) +#define TRANS_MSA_CEA_RANGE (1<<3) /* LCPLL Control */ #define LCPLL_CTL _MMIO(0x130040) diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index fed26d6e4e27..e195c287c263 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -1659,6 +1659,10 @@ void intel_ddi_set_pipe_settings(const struct intel_crtc_state *crtc_state) WARN_ON(transcoder_is_dsi(cpu_transcoder)); temp = TRANS_MSA_SYNC_CLK; + + if (crtc_state->limited_color_range) + temp |= TRANS_MSA_CEA_RANGE; + switch (crtc_state->pipe_bpp) { case 18: temp |= TRANS_MSA_6_BPC; -- 2.11.0

7 years

2
1
0 0

FAILED: patch "[PATCH] drm/i915: set DP Main Stream Attribute for color range on DDI" failed to apply to 4.19-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.19-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 6209c285e7a5e68dbcdf8fd2456c6dd68433806b Mon Sep 17 00:00:00 2001 From: Jani Nikula <jani.nikula(a)intel.com> Date: Tue, 14 Aug 2018 09:00:01 +0300 Subject: [PATCH] drm/i915: set DP Main Stream Attribute for color range on DDI platforms MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Since Haswell we have no color range indication either in the pipe or port registers for DP. Instead, there's a separate register for setting the DP Main Stream Attributes (MSA) directly. The MSA register definition makes no references to colorimetry, just a vague reference to the DP spec. The connection to the color range was lost. Apparently we've failed to set the proper MSA bit for limited, or CEA, range ever since the first DDI platforms. We've started setting other MSA parameters since commit dae847991a43 ("drm/i915: add intel_ddi_set_pipe_settings"). Without the crucial bit of information, the DP sink has no way of knowing the source is actually transmitting limited range RGB, leading to "washed out" colors. With the colorimetry information, compliant sinks should be able to handle the limited range properly. Native (i.e. non-LSPCON) HDMI was not affected because we do pass the color range via AVI infoframes. Though not the root cause, the problem was made worse for DDI platforms with commit 55bc60db5988 ("drm/i915: Add "Automatic" mode for the "Broadcast RGB" property"), which selects limited range RGB automatically based on the mode, as per the DP, HDMI and CEA specs. After all these years, the fix boils down to flipping one bit. [Per testing reports, this fixes DP sinks, but not the LSPCON. My educated guess is that the LSPCON fails to turn the CEA range MSA into AVI infoframes for HDMI.] Reported-by: Michał Kopeć <mkopec12(a)gmail.com> Reported-by: N. W. <nw9165-3201(a)yahoo.com> Reported-by: Nicholas Stommel <nicholas.stommel(a)gmail.com> Reported-by: Tom Yan <tom.ty89(a)gmail.com> Tested-by: Nicholas Stommel <nicholas.stommel(a)gmail.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=100023 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107476 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94921 Cc: Paulo Zanoni <paulo.r.zanoni(a)intel.com> Cc: Rodrigo Vivi <rodrigo.vivi(a)intel.com> Cc: Ville Syrjälä <ville.syrjala(a)linux.intel.com> Cc: <stable(a)vger.kernel.org> # v3.9+ Reviewed-by: Rodrigo Vivi <rodrigo.vivi(a)intel.com> Signed-off-by: Jani Nikula <jani.nikula(a)intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180814060001.18224-1-jani.n… (cherry picked from commit dc5977da99ea28094b8fa4e9bacbd29bedc41de5) Signed-off-by: Rodrigo Vivi <rodrigo.vivi(a)intel.com> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 91e7483228e1..08ec7446282e 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -9201,6 +9201,7 @@ enum skl_power_gate { #define TRANS_MSA_10_BPC (2 << 5) #define TRANS_MSA_12_BPC (3 << 5) #define TRANS_MSA_16_BPC (4 << 5) +#define TRANS_MSA_CEA_RANGE (1 << 3) /* LCPLL Control */ #define LCPLL_CTL _MMIO(0x130040) diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index 39d66f8493fa..8761513f3532 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -1685,6 +1685,10 @@ void intel_ddi_set_pipe_settings(const struct intel_crtc_state *crtc_state) WARN_ON(transcoder_is_dsi(cpu_transcoder)); temp = TRANS_MSA_SYNC_CLK; + + if (crtc_state->limited_color_range) + temp |= TRANS_MSA_CEA_RANGE; + switch (crtc_state->pipe_bpp) { case 18: temp |= TRANS_MSA_6_BPC;

7 years

3
2
0 0

perf fails to build in v4.18.y.queue

by Guenter Roeck

Building x86_64:tools/perf ... failed -------------- Error log: tools/perf/util/python.c: In function ‘get_md’: tools/perf/util/python.c:987:9: error: ‘struct perf_mmap’ has no member named ‘cpu’ At top level: cc1: error: unrecognized command line option ‘-Wno-cast-function-type’ [-Werror] cc1: all warnings being treated as errors error: command 'gcc' failed with exit status 1 Guenter

7 years

2
1
0 0

Re: Patch "tracing: Handle CC_FLAGS_FTRACE more accurately" has been added to the ...-stable tree

by Vasily Gorbik

On Tue, Sep 11, 2018 at 12:14:30PM +0200, gregkh(a)linuxfoundation.org wrote: > > This is a note to let you know that I've just added the patch titled > > tracing: Handle CC_FLAGS_FTRACE more accurately > > to the 4.14-stable tree which can be found at: > http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… ... > to the 4.18-stable tree which can be found at: > http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… ... > to the 4.4-stable tree which can be found at: > http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… ... > to the 4.9-stable tree which can be found at: > http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… > I believe there is no need to backport this patch in neither of stable branches listed above. This patch is the first one in the patch series: http://lkml.kernel.org/r/cover.thread-aa7b8d.your-ad-here.call-01533557518-… The patch series adds s390 support for utilizing newly available for s390 in gcc 9 flags -fentry -mrecord-mcount and -mnop-mcount, and adds generic -mnop-mcount support. And there is no benefit in backporting just the first one. Moreover this patch cause kernel recompile for intdeb-pkg and tar%pkg targets (i.e. make targz-pkg), because those targets call make recursively (they do extra "make modules_install"), and exported variable cause duplicated build flags in sub-make. There is a potential fix: https://www.spinics.net/lists/linux-kbuild/msg19297.html > The filename of the patch is: > tracing-handle-cc_flags_ftrace-more-accurately.patch > and it can be found in the queue-4.9 subdirectory. > > If you, or anyone else, feels it should not be added to the stable tree, > please let <stable(a)vger.kernel.org> know about it. > > > From foo@baz Tue Sep 11 12:09:55 CEST 2018 > From: Vasily Gorbik <gor(a)linux.ibm.com> > Date: Mon, 6 Aug 2018 15:17:42 +0200 > Subject: tracing: Handle CC_FLAGS_FTRACE more accurately > > From: Vasily Gorbik <gor(a)linux.ibm.com> > > [ Upstream commit f28bc3c32c059ab4d13f52155fabd3e20f477f65 ] > > CC_FLAGS_FTRACE is exported and later used to remove ftrace relevant > build flags from files which should be built without ftrace support. > For that reason add -mfentry to CC_FLAGS_FTRACE as well. That fixes > a problem with vdso32 build on s390, where -mfentry could not be used > together with -m31 flag. > > At the same time flags like -pg and -mfentry are not relevant for asm > files, so avoid adding them to KBUILD_AFLAGS. > > Introduce CC_FLAGS_USING instead of CC_USING_FENTRY to collect > -DCC_USING_FENTRY (and future alike) which are relevant for both > KBUILD_CFLAGS and KBUILD_AFLAGS. > > Link: http://lkml.kernel.org/r/patch-1.thread-aa7b8d.git-42971afe87de.your-ad-her… > > Signed-off-by: Vasily Gorbik <gor(a)linux.ibm.com> > Signed-off-by: Steven Rostedt (VMware) <rostedt(a)goodmis.org> > Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> > Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> > --- > Makefile | 11 +++++++---- > 1 file changed, 7 insertions(+), 4 deletions(-) > > --- a/Makefile > +++ b/Makefile > @@ -760,12 +760,15 @@ ifdef CONFIG_FUNCTION_TRACER > ifndef CC_FLAGS_FTRACE > CC_FLAGS_FTRACE := -pg > endif > -export CC_FLAGS_FTRACE > ifdef CONFIG_HAVE_FENTRY > -CC_USING_FENTRY := $(call cc-option, -mfentry -DCC_USING_FENTRY) > + ifeq ($(call cc-option-yn, -mfentry),y) > + CC_FLAGS_FTRACE += -mfentry > + CC_FLAGS_USING += -DCC_USING_FENTRY > + endif > endif > -KBUILD_CFLAGS += $(CC_FLAGS_FTRACE) $(CC_USING_FENTRY) > -KBUILD_AFLAGS += $(CC_USING_FENTRY) > +export CC_FLAGS_FTRACE > +KBUILD_CFLAGS += $(CC_FLAGS_FTRACE) $(CC_FLAGS_USING) > +KBUILD_AFLAGS += $(CC_FLAGS_USING) > ifdef CONFIG_DYNAMIC_FTRACE > ifdef CONFIG_HAVE_C_RECORDMCOUNT > BUILD_C_RECORDMCOUNT := y > > > Patches currently in stable-queue which might be from gor(a)linux.ibm.com are > > queue-4.9/tracing-handle-cc_flags_ftrace-more-accurately.patch >

7 years

2
1
0 0

[PATCH AUTOSEL 4.14 01/67] usb: dwc3: change stream event enable bit back to 13

by Sasha Levin

From: "Erich E. Hoover" <ehoover(a)sweptlaser.com> [ Upstream commit 9a7faac3650216112e034b157289bf1a48a99e2d ] Commit ff3f0789b3dc ("usb: dwc3: use BIT() macro where possible") changed DWC3_DEPCFG_STREAM_EVENT_EN from bit 13 to bit 12. Spotted this cleanup typo while looking at diffs between 4.9.35 and 4.14.16 for a separate issue. Fixes: ff3f0789b3dc ("usb: dwc3: use BIT() macro where possible") Signed-off-by: Erich E. Hoover <ehoover(a)sweptlaser.com> Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> --- drivers/usb/dwc3/gadget.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h index 4a3227543255..5cc9fd730656 100644 --- a/drivers/usb/dwc3/gadget.h +++ b/drivers/usb/dwc3/gadget.h @@ -33,7 +33,7 @@ struct dwc3; #define DWC3_DEPCFG_XFER_IN_PROGRESS_EN BIT(9) #define DWC3_DEPCFG_XFER_NOT_READY_EN BIT(10) #define DWC3_DEPCFG_FIFO_ERROR_EN BIT(11) -#define DWC3_DEPCFG_STREAM_EVENT_EN BIT(12) +#define DWC3_DEPCFG_STREAM_EVENT_EN BIT(13) #define DWC3_DEPCFG_BINTERVAL_M1(n) (((n) & 0xff) << 16) #define DWC3_DEPCFG_STREAM_CAPABLE BIT(24) #define DWC3_DEPCFG_EP_NUMBER(n) (((n) & 0x1f) << 25) -- 2.17.1

7 years

3
69
0 0

[PATCH AUTOSEL 4.18 01/88] usb: dwc3: change stream event enable bit back to 13

by Sasha Levin

From: "Erich E. Hoover" <ehoover(a)sweptlaser.com> [ Upstream commit 9a7faac3650216112e034b157289bf1a48a99e2d ] Commit ff3f0789b3dc ("usb: dwc3: use BIT() macro where possible") changed DWC3_DEPCFG_STREAM_EVENT_EN from bit 13 to bit 12. Spotted this cleanup typo while looking at diffs between 4.9.35 and 4.14.16 for a separate issue. Fixes: ff3f0789b3dc ("usb: dwc3: use BIT() macro where possible") Signed-off-by: Erich E. Hoover <ehoover(a)sweptlaser.com> Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> --- drivers/usb/dwc3/gadget.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h index db610c56f1d6..2aacd1afd9ff 100644 --- a/drivers/usb/dwc3/gadget.h +++ b/drivers/usb/dwc3/gadget.h @@ -25,7 +25,7 @@ struct dwc3; #define DWC3_DEPCFG_XFER_IN_PROGRESS_EN BIT(9) #define DWC3_DEPCFG_XFER_NOT_READY_EN BIT(10) #define DWC3_DEPCFG_FIFO_ERROR_EN BIT(11) -#define DWC3_DEPCFG_STREAM_EVENT_EN BIT(12) +#define DWC3_DEPCFG_STREAM_EVENT_EN BIT(13) #define DWC3_DEPCFG_BINTERVAL_M1(n) (((n) & 0xff) << 16) #define DWC3_DEPCFG_STREAM_CAPABLE BIT(24) #define DWC3_DEPCFG_EP_NUMBER(n) (((n) & 0x1f) << 25) -- 2.17.1

7 years

3
91
0 0

[PATCH v4 1/3] fs/dcache: Fix incorrect nr_dentry_unused accounting in shrink_dcache_sb()

by Waiman Long

The nr_dentry_unused per-cpu counter tracks dentries in both the LRU lists and the shrink lists where the DCACHE_LRU_LIST bit is set. The shrink_dcache_sb() function moves dentries from the LRU list to a shrink list and subtracts the dentry count from nr_dentry_unused. This is incorrect as the nr_dentry_unused count Will also be decremented in shrink_dentry_list() via d_shrink_del(). To fix this double decrement, the decrement in the shrink_dcache_sb() function is taken out. Fixes: 4e717f5c1083 ("list_lru: remove special case function list_lru_dispose_all." Cc: stable(a)vger.kernel.org Signed-off-by: Waiman Long <longman(a)redhat.com> Reviewed-by: Dave Chinner <dchinner(a)redhat.com> --- fs/dcache.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/fs/dcache.c b/fs/dcache.c index 2e7e8d8..cb515f1 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -1202,15 +1202,11 @@ static enum lru_status dentry_lru_isolate_shrink(struct list_head *item, */ void shrink_dcache_sb(struct super_block *sb) { - long freed; - do { LIST_HEAD(dispose); - freed = list_lru_walk(&sb->s_dentry_lru, + list_lru_walk(&sb->s_dentry_lru, dentry_lru_isolate_shrink, &dispose, 1024); - - this_cpu_sub(nr_dentry_unused, freed); shrink_dentry_list(&dispose); } while (list_lru_count(&sb->s_dentry_lru) > 0); } -- 1.8.3.1

7 years

1
0
0 0

[PATCH AUTOSEL 4.14 01/89] misc: mic: SCIF Fix scif_get_new_port() error handling

by Sasha Levin

From: Dan Carpenter <dan.carpenter(a)oracle.com> [ Upstream commit a39284ae9d2ad09975c8ae33f1bd0f05fbfbf6ee ] There are only 2 callers of scif_get_new_port() and both appear to get the error handling wrong. Both treat zero returns as error, but it actually returns negative error codes and >= 0 on success. Fixes: e9089f43c9a7 ("misc: mic: SCIF open close bind and listen APIs") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> --- drivers/misc/mic/scif/scif_api.c | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-) diff --git a/drivers/misc/mic/scif/scif_api.c b/drivers/misc/mic/scif/scif_api.c index ddc9e4b08b5c..56efa9d18a9a 100644 --- a/drivers/misc/mic/scif/scif_api.c +++ b/drivers/misc/mic/scif/scif_api.c @@ -370,11 +370,10 @@ int scif_bind(scif_epd_t epd, u16 pn) goto scif_bind_exit; } } else { - pn = scif_get_new_port(); - if (!pn) { - ret = -ENOSPC; + ret = scif_get_new_port(); + if (ret < 0) goto scif_bind_exit; - } + pn = ret; } ep->state = SCIFEP_BOUND; @@ -648,13 +647,12 @@ int __scif_connect(scif_epd_t epd, struct scif_port_id *dst, bool non_block) err = -EISCONN; break; case SCIFEP_UNBOUND: - ep->port.port = scif_get_new_port(); - if (!ep->port.port) { - err = -ENOSPC; - } else { - ep->port.node = scif_info.nodeid; - ep->conn_async_state = ASYNC_CONN_IDLE; - } + err = scif_get_new_port(); + if (err < 0) + break; + ep->port.port = err; + ep->port.node = scif_info.nodeid; + ep->conn_async_state = ASYNC_CONN_IDLE; /* Fall through */ case SCIFEP_BOUND: /* -- 2.17.1

7 years

2
91
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror September 2018