April 2018 - Linux-stable-mirror

Patch "net: qca_spi: Fix alignment issues in rx path" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: qca_spi: Fix alignment issues in rx path to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-qca_spi-fix-alignment-issues-in-rx-path.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 13:58:07 CEST 2018 From: Stefan Wahren <stefan.wahren(a)i2se.com> Date: Tue, 9 May 2017 15:40:38 +0200 Subject: net: qca_spi: Fix alignment issues in rx path From: Stefan Wahren <stefan.wahren(a)i2se.com> [ Upstream commit 8d66c30b12ed3cb533696dea8b9a9eadd5da426a ] The qca_spi driver causes alignment issues on ARM devices. So fix this by using netdev_alloc_skb_ip_align(). Signed-off-by: Stefan Wahren <stefan.wahren(a)i2se.com> Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/qualcomm/qca_spi.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) --- a/drivers/net/ethernet/qualcomm/qca_spi.c +++ b/drivers/net/ethernet/qualcomm/qca_spi.c @@ -297,8 +297,9 @@ qcaspi_receive(struct qcaspi *qca) /* Allocate rx SKB if we don't have one available. */ if (!qca->rx_skb) { - qca->rx_skb = netdev_alloc_skb(net_dev, - net_dev->mtu + VLAN_ETH_HLEN); + qca->rx_skb = netdev_alloc_skb_ip_align(net_dev, + net_dev->mtu + + VLAN_ETH_HLEN); if (!qca->rx_skb) { netdev_dbg(net_dev, "out of RX resources\n"); qca->stats.out_of_mem++; @@ -378,7 +379,7 @@ qcaspi_receive(struct qcaspi *qca) qca->rx_skb, qca->rx_skb->dev); qca->rx_skb->ip_summed = CHECKSUM_UNNECESSARY; netif_rx_ni(qca->rx_skb); - qca->rx_skb = netdev_alloc_skb(net_dev, + qca->rx_skb = netdev_alloc_skb_ip_align(net_dev, net_dev->mtu + VLAN_ETH_HLEN); if (!qca->rx_skb) { netdev_dbg(net_dev, "out of RX resources\n"); @@ -760,7 +761,8 @@ qcaspi_netdev_init(struct net_device *de if (!qca->rx_buffer) return -ENOBUFS; - qca->rx_skb = netdev_alloc_skb(dev, qca->net_dev->mtu + VLAN_ETH_HLEN); + qca->rx_skb = netdev_alloc_skb_ip_align(dev, qca->net_dev->mtu + + VLAN_ETH_HLEN); if (!qca->rx_skb) { kfree(qca->rx_buffer); netdev_info(qca->net_dev, "Failed to allocate RX sk_buff.\n"); Patches currently in stable-queue which might be from stefan.wahren(a)i2se.com are queue-3.18/net-qca_spi-fix-alignment-issues-in-rx-path.patch

6 years, 9 months

1
0
0 0

Patch "net: move somaxconn init from sysctl code" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: move somaxconn init from sysctl code to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-move-somaxconn-init-from-sysctl-code.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 13:58:07 CEST 2018 From: Roman Kapl <roman.kapl(a)sysgo.com> Date: Wed, 24 May 2017 10:22:22 +0200 Subject: net: move somaxconn init from sysctl code From: Roman Kapl <roman.kapl(a)sysgo.com> [ Upstream commit 7c3f1875c66fbc19762760097cabc91849ea0bbb ] The default value for somaxconn is set in sysctl_core_net_init(), but this function is not called when kernel is configured without CONFIG_SYSCTL. This results in the kernel not being able to accept TCP connections, because the backlog has zero size. Usually, the user ends up with: "TCP: request_sock_TCP: Possible SYN flooding on port 7. Dropping request. Check SNMP counters." If SYN cookies are not enabled the connection is rejected. Before ef547f2ac16 (tcp: remove max_qlen_log), the effects were less severe, because the backlog was always at least eight slots long. Signed-off-by: Roman Kapl <roman.kapl(a)sysgo.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/core/net_namespace.c | 19 +++++++++++++++++++ net/core/sysctl_net_core.c | 2 -- 2 files changed, 19 insertions(+), 2 deletions(-) --- a/net/core/net_namespace.c +++ b/net/core/net_namespace.c @@ -188,6 +188,25 @@ out_undo: goto out; } +static int __net_init net_defaults_init_net(struct net *net) +{ + net->core.sysctl_somaxconn = SOMAXCONN; + return 0; +} + +static struct pernet_operations net_defaults_ops = { + .init = net_defaults_init_net, +}; + +static __init int net_defaults_init(void) +{ + if (register_pernet_subsys(&net_defaults_ops)) + panic("Cannot initialize net default settings"); + + return 0; +} + +core_initcall(net_defaults_init); #ifdef CONFIG_NET_NS static struct kmem_cache *net_cachep; --- a/net/core/sysctl_net_core.c +++ b/net/core/sysctl_net_core.c @@ -395,8 +395,6 @@ static __net_init int sysctl_core_net_in { struct ctl_table *tbl; - net->core.sysctl_somaxconn = SOMAXCONN; - tbl = netns_core_table; if (!net_eq(net, &init_net)) { tbl = kmemdup(tbl, sizeof(netns_core_table), GFP_KERNEL); Patches currently in stable-queue which might be from roman.kapl(a)sysgo.com are queue-3.18/net-move-somaxconn-init-from-sysctl-code.patch

6 years, 9 months

1
0
0 0

Patch "net: llc: add lock_sock in llc_ui_bind to avoid a race condition" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: llc: add lock_sock in llc_ui_bind to avoid a race condition to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-llc-add-lock_sock-in-llc_ui_bind-to-avoid-a-race-condition.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 13:58:07 CEST 2018 From: linzhang <xiaolou4617(a)gmail.com> Date: Thu, 25 May 2017 14:07:18 +0800 Subject: net: llc: add lock_sock in llc_ui_bind to avoid a race condition From: linzhang <xiaolou4617(a)gmail.com> [ Upstream commit 0908cf4dfef35fc6ac12329007052ebe93ff1081 ] There is a race condition in llc_ui_bind if two or more processes/threads try to bind a same socket. If more processes/threads bind a same socket success that will lead to two problems, one is this action is not what we expected, another is will lead to kernel in unstable status or oops(in my simple test case, cause llc2.ko can't unload). The current code is test SOCK_ZAPPED bit to avoid a process to bind a same socket twice but that is can't avoid more processes/threads try to bind a same socket at the same time. So, add lock_sock in llc_ui_bind like others, such as llc_ui_connect. Signed-off-by: Lin Zhang <xiaolou4617(a)gmail.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/llc/af_llc.c | 3 +++ 1 file changed, 3 insertions(+) --- a/net/llc/af_llc.c +++ b/net/llc/af_llc.c @@ -309,6 +309,8 @@ static int llc_ui_bind(struct socket *so int rc = -EINVAL; dprintk("%s: binding %02X\n", __func__, addr->sllc_sap); + + lock_sock(sk); if (unlikely(!sock_flag(sk, SOCK_ZAPPED) || addrlen != sizeof(*addr))) goto out; rc = -EAFNOSUPPORT; @@ -380,6 +382,7 @@ static int llc_ui_bind(struct socket *so out_put: llc_sap_put(sap); out: + release_sock(sk); return rc; } Patches currently in stable-queue which might be from xiaolou4617(a)gmail.com are queue-3.18/net-x25-fix-one-potential-use-after-free-issue.patch queue-3.18/net-llc-add-lock_sock-in-llc_ui_bind-to-avoid-a-race-condition.patch

6 years, 9 months

1
0
0 0

Patch "net/mlx4_en: Avoid adding steering rules with invalid ring" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net/mlx4_en: Avoid adding steering rules with invalid ring to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-mlx4_en-avoid-adding-steering-rules-with-invalid-ring.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 13:58:07 CEST 2018 From: Talat Batheesh <talatb(a)mellanox.com> Date: Tue, 9 May 2017 14:45:23 +0300 Subject: net/mlx4_en: Avoid adding steering rules with invalid ring From: Talat Batheesh <talatb(a)mellanox.com> [ Upstream commit 89c557687a32c294e9d25670a96e9287c09f2d5f ] Inserting steering rules with illegal ring is an invalid operation, block it. Fixes: 820672812f82 ('net/mlx4_en: Manage flow steering rules with ethtool') Signed-off-by: Talat Batheesh <talatb(a)mellanox.com> Signed-off-by: Tariq Toukan <tariqt(a)mellanox.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 5 +++++ 1 file changed, 5 insertions(+) --- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c @@ -946,6 +946,11 @@ static int mlx4_en_flow_replace(struct n qpn = priv->drop_qp.qpn; else if (cmd->fs.ring_cookie & EN_ETHTOOL_QP_ATTACH) { qpn = cmd->fs.ring_cookie & (EN_ETHTOOL_QP_ATTACH - 1); + if (qpn < priv->rss_map.base_qpn || + qpn >= priv->rss_map.base_qpn + priv->rx_ring_num) { + en_warn(priv, "rxnfc: QP (0x%x) doesn't exist\n", qpn); + return -EINVAL; + } } else { if (cmd->fs.ring_cookie >= priv->rx_ring_num) { en_warn(priv, "rxnfc: RX ring (%llu) doesn't exist\n", Patches currently in stable-queue which might be from talatb(a)mellanox.com are queue-3.18/net-mlx4_en-avoid-adding-steering-rules-with-invalid-ring.patch queue-3.18/net-mlx4-fix-the-check-in-attaching-steering-rules.patch

6 years, 9 months

1
0
0 0

Patch "net/mlx4: Fix the check in attaching steering rules" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net/mlx4: Fix the check in attaching steering rules to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-mlx4-fix-the-check-in-attaching-steering-rules.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 13:58:07 CEST 2018 From: Talat Batheesh <talatb(a)mellanox.com> Date: Sun, 4 Jun 2017 14:30:07 +0300 Subject: net/mlx4: Fix the check in attaching steering rules From: Talat Batheesh <talatb(a)mellanox.com> [ Upstream commit 6dc06c08bef1c746ff8da33dab677cfbacdcad32 ] Our previous patch (cited below) introduced a regression for RAW Eth QPs. Fix it by checking if the QP number provided by user-space exists, hence allowing steering rules to be added for valid QPs only. Fixes: 89c557687a32 ("net/mlx4_en: Avoid adding steering rules with invalid ring") Reported-by: Or Gerlitz <gerlitz.or(a)gmail.com> Signed-off-by: Talat Batheesh <talatb(a)mellanox.com> Signed-off-by: Tariq Toukan <tariqt(a)mellanox.com> Acked-by: Or Gerlitz <ogerlitz(a)mellanox.com> Reviewed-by: Leon Romanovsky <leonro(a)mellanox.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/mellanox/mlx4/en_ethtool.c | 5 ----- drivers/net/ethernet/mellanox/mlx4/mcg.c | 15 +++++++++++---- drivers/net/ethernet/mellanox/mlx4/qp.c | 13 +++++++++++++ include/linux/mlx4/qp.h | 1 + 4 files changed, 25 insertions(+), 9 deletions(-) --- a/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_ethtool.c @@ -946,11 +946,6 @@ static int mlx4_en_flow_replace(struct n qpn = priv->drop_qp.qpn; else if (cmd->fs.ring_cookie & EN_ETHTOOL_QP_ATTACH) { qpn = cmd->fs.ring_cookie & (EN_ETHTOOL_QP_ATTACH - 1); - if (qpn < priv->rss_map.base_qpn || - qpn >= priv->rss_map.base_qpn + priv->rx_ring_num) { - en_warn(priv, "rxnfc: QP (0x%x) doesn't exist\n", qpn); - return -EINVAL; - } } else { if (cmd->fs.ring_cookie >= priv->rx_ring_num) { en_warn(priv, "rxnfc: RX ring (%llu) doesn't exist\n", --- a/drivers/net/ethernet/mellanox/mlx4/mcg.c +++ b/drivers/net/ethernet/mellanox/mlx4/mcg.c @@ -35,6 +35,7 @@ #include <linux/etherdevice.h> #include <linux/mlx4/cmd.h> +#include <linux/mlx4/qp.h> #include <linux/export.h> #include "mlx4.h" @@ -985,16 +986,21 @@ int mlx4_flow_attach(struct mlx4_dev *de if (IS_ERR(mailbox)) return PTR_ERR(mailbox); + if (!mlx4_qp_lookup(dev, rule->qpn)) { + mlx4_err_rule(dev, "QP doesn't exist\n", rule); + ret = -EINVAL; + goto out; + } + trans_rule_ctrl_to_hw(rule, mailbox->buf); size += sizeof(struct mlx4_net_trans_rule_hw_ctrl); list_for_each_entry(cur, &rule->list, list) { ret = parse_trans_rule(dev, cur, mailbox->buf + size); - if (ret < 0) { - mlx4_free_cmd_mailbox(dev, mailbox); - return ret; - } + if (ret < 0) + goto out; + size += ret; } @@ -1006,6 +1012,7 @@ int mlx4_flow_attach(struct mlx4_dev *de else if (ret) mlx4_err_rule(dev, "Fail to register network rule\n", rule); +out: mlx4_free_cmd_mailbox(dev, mailbox); return ret; --- a/drivers/net/ethernet/mellanox/mlx4/qp.c +++ b/drivers/net/ethernet/mellanox/mlx4/qp.c @@ -358,6 +358,19 @@ static void mlx4_qp_free_icm(struct mlx4 __mlx4_qp_free_icm(dev, qpn); } +struct mlx4_qp *mlx4_qp_lookup(struct mlx4_dev *dev, u32 qpn) +{ + struct mlx4_qp_table *qp_table = &mlx4_priv(dev)->qp_table; + struct mlx4_qp *qp; + + spin_lock(&qp_table->lock); + + qp = __mlx4_qp_lookup(dev, qpn); + + spin_unlock(&qp_table->lock); + return qp; +} + int mlx4_qp_alloc(struct mlx4_dev *dev, int qpn, struct mlx4_qp *qp, gfp_t gfp) { struct mlx4_priv *priv = mlx4_priv(dev); --- a/include/linux/mlx4/qp.h +++ b/include/linux/mlx4/qp.h @@ -437,6 +437,7 @@ struct mlx4_update_qp_params { u32 flags; }; +struct mlx4_qp *mlx4_qp_lookup(struct mlx4_dev *dev, u32 qpn); int mlx4_update_qp(struct mlx4_dev *dev, u32 qpn, enum mlx4_update_qp_attr attr, struct mlx4_update_qp_params *params); Patches currently in stable-queue which might be from talatb(a)mellanox.com are queue-3.18/net-mlx4_en-avoid-adding-steering-rules-with-invalid-ring.patch queue-3.18/net-mlx4-fix-the-check-in-attaching-steering-rules.patch

6 years, 9 months

1
0
0 0

Patch "net: freescale: fix potential null pointer dereference" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: freescale: fix potential null pointer dereference to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-freescale-fix-potential-null-pointer-dereference.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 13:58:07 CEST 2018 From: "Gustavo A. R. Silva" <garsilva(a)embeddedor.com> Date: Tue, 30 May 2017 17:38:43 -0500 Subject: net: freescale: fix potential null pointer dereference From: "Gustavo A. R. Silva" <garsilva(a)embeddedor.com> [ Upstream commit 06d2d6431bc8d41ef5ffd8bd4b52cea9f72aed22 ] Add NULL check before dereferencing pointer _id_ in order to avoid a potential NULL pointer dereference. Addresses-Coverity-ID: 1397995 Signed-off-by: Gustavo A. R. Silva <garsilva(a)embeddedor.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/freescale/fsl_pq_mdio.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) --- a/drivers/net/ethernet/freescale/fsl_pq_mdio.c +++ b/drivers/net/ethernet/freescale/fsl_pq_mdio.c @@ -370,7 +370,7 @@ static int fsl_pq_mdio_probe(struct plat { const struct of_device_id *id = of_match_device(fsl_pq_mdio_match, &pdev->dev); - const struct fsl_pq_mdio_data *data = id->data; + const struct fsl_pq_mdio_data *data; struct device_node *np = pdev->dev.of_node; struct resource res; struct device_node *tbi; @@ -378,6 +378,13 @@ static int fsl_pq_mdio_probe(struct plat struct mii_bus *new_bus; int err; + if (!id) { + dev_err(&pdev->dev, "Failed to match device\n"); + return -ENODEV; + } + + data = id->data; + dev_dbg(&pdev->dev, "found %s compatible node\n", id->compatible); new_bus = mdiobus_alloc_size(sizeof(*priv)); Patches currently in stable-queue which might be from garsilva(a)embeddedor.com are queue-3.18/net-freescale-fix-potential-null-pointer-dereference.patch

6 years, 9 months

1
0
0 0

Patch "net: ethernet: ti: cpsw: adjust cpsw fifos depth for fullduplex flow control" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: ethernet: ti: cpsw: adjust cpsw fifos depth for fullduplex flow control to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-ethernet-ti-cpsw-adjust-cpsw-fifos-depth-for-fullduplex-flow-control.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 13:58:07 CEST 2018 From: Grygorii Strashko <grygorii.strashko(a)ti.com> Date: Mon, 8 May 2017 14:21:21 -0500 Subject: net: ethernet: ti: cpsw: adjust cpsw fifos depth for fullduplex flow control From: Grygorii Strashko <grygorii.strashko(a)ti.com> [ Upstream commit 48f5bccc60675f8426a6159935e8636a1fd89f56 ] When users set flow control using ethtool the bits are set properly in the CPGMAC_SL MACCONTROL register, but the FIFO depth in the respective Port n Maximum FIFO Blocks (Pn_MAX_BLKS) registers remains set to the minimum size reset value. When receive flow control is enabled on a port, the port's associated FIFO block allocation must be adjusted. The port RX allocation must increase to accommodate the flow control runout. The TRM recommends numbers of 5 or 6. Hence, apply required Port FIFO configuration to Pn_MAX_BLKS.Pn_TX_MAX_BLKS=0xF and Pn_MAX_BLKS.Pn_RX_MAX_BLKS=0x5 during interface initialization. Cc: Schuyler Patton <spatton(a)ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko(a)ti.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/ti/cpsw.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -293,6 +293,10 @@ struct cpsw_ss_regs { /* Bit definitions for the CPSW1_TS_SEQ_LTYPE register */ #define CPSW_V1_SEQ_ID_OFS_SHIFT 16 +#define CPSW_MAX_BLKS_TX 15 +#define CPSW_MAX_BLKS_TX_SHIFT 4 +#define CPSW_MAX_BLKS_RX 5 + struct cpsw_host_regs { u32 max_blks; u32 blk_cnt; @@ -1120,11 +1124,23 @@ static void cpsw_slave_open(struct cpsw_ switch (priv->version) { case CPSW_VERSION_1: slave_write(slave, TX_PRIORITY_MAPPING, CPSW1_TX_PRI_MAP); + /* Increase RX FIFO size to 5 for supporting fullduplex + * flow control mode + */ + slave_write(slave, + (CPSW_MAX_BLKS_TX << CPSW_MAX_BLKS_TX_SHIFT) | + CPSW_MAX_BLKS_RX, CPSW1_MAX_BLKS); break; case CPSW_VERSION_2: case CPSW_VERSION_3: case CPSW_VERSION_4: slave_write(slave, TX_PRIORITY_MAPPING, CPSW2_TX_PRI_MAP); + /* Increase RX FIFO size to 5 for supporting fullduplex + * flow control mode + */ + slave_write(slave, + (CPSW_MAX_BLKS_TX << CPSW_MAX_BLKS_TX_SHIFT) | + CPSW_MAX_BLKS_RX, CPSW2_MAX_BLKS); break; } Patches currently in stable-queue which might be from grygorii.strashko(a)ti.com are queue-3.18/net-ethernet-ti-cpsw-adjust-cpsw-fifos-depth-for-fullduplex-flow-control.patch

6 years, 9 months

1
0
0 0

Patch "net: emac: fix reset timeout with AR8035 phy" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: emac: fix reset timeout with AR8035 phy to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-emac-fix-reset-timeout-with-ar8035-phy.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 13:58:07 CEST 2018 From: Christian Lamparter <chunkeey(a)googlemail.com> Date: Wed, 7 Jun 2017 15:51:15 +0200 Subject: net: emac: fix reset timeout with AR8035 phy From: Christian Lamparter <chunkeey(a)googlemail.com> [ Upstream commit 19d90ece81da802207a9b91ce95a29fbdc40626e ] This patch fixes a problem where the AR8035 PHY can't be detected on an Cisco Meraki MR24, if the ethernet cable is not connected on boot. Russell Senior provided steps to reproduce the issue: |Disconnect ethernet cable, apply power, wait until device has booted, |plug in ethernet, check for interfaces, no eth0 is listed. | |This appears to be a problem during probing of the AR8035 Phy chip. |When ethernet has no link, the phy detection fails, and eth0 is not |created. Plugging ethernet later has no effect, because there is no |interface as far as the kernel is concerned. The relevant part of |the boot log looks like this: |this is the failing case: | |[ 0.876611] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode |[ 0.882532] /plb/opb/ethernet@ef600c00: reset timeout |[ 0.888546] /plb/opb/ethernet@ef600c00: can't find PHY! |and the succeeding case: | |[ 0.876672] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode |[ 0.883952] eth0: EMAC-0 /plb/opb/ethernet@ef600c00, MAC 00:01:.. |[ 0.890822] eth0: found Atheros 8035 Gigabit Ethernet PHY (0x01) Based on the comment and the commit message of commit 23fbb5a87c56 ("emac: Fix EMAC soft reset on 460EX/GT"). This is because the AR8035 PHY doesn't provide the TX Clock, if the ethernet cable is not attached. This causes the reset to timeout and the PHY detection code in emac_init_phy() is unable to detect the AR8035 PHY. As a result, the emac driver bails out early and the user left with no ethernet. In order to stay compatible with existing configurations, the driver tries the current reset approach at first. Only if the first attempt timed out, it does perform one more retry with the clock temporarily switched to the internal source for just the duration of the reset. LEDE-Bug: #687 <https://bugs.lede-project.org/index.php?do=details&task_id=687> Cc: Chris Blake <chrisrblake93(a)gmail.com> Reported-by: Russell Senior <russell(a)personaltelco.net> Fixes: 23fbb5a87c56e98 ("emac: Fix EMAC soft reset on 460EX/GT") Signed-off-by: Christian Lamparter <chunkeey(a)googlemail.com> Reviewed-by: Andrew Lunn <andrew(a)lunn.ch> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/ibm/emac/core.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) --- a/drivers/net/ethernet/ibm/emac/core.c +++ b/drivers/net/ethernet/ibm/emac/core.c @@ -349,6 +349,7 @@ static int emac_reset(struct emac_instan { struct emac_regs __iomem *p = dev->emacp; int n = 20; + bool __maybe_unused try_internal_clock = false; DBG(dev, "reset" NL); @@ -361,6 +362,7 @@ static int emac_reset(struct emac_instan } #ifdef CONFIG_PPC_DCR_NATIVE +do_retry: /* * PPC460EX/GT Embedded Processor Advanced User's Manual * section 28.10.1 Mode Register 0 (EMACx_MR0) states: @@ -368,10 +370,19 @@ static int emac_reset(struct emac_instan * of the EMAC. If none is present, select the internal clock * (SDR0_ETH_CFG[EMACx_PHY_CLK] = 1). * After a soft reset, select the external clock. + * + * The AR8035-A PHY Meraki MR24 does not provide a TX Clk if the + * ethernet cable is not attached. This causes the reset to timeout + * and the PHY detection code in emac_init_phy() is unable to + * communicate and detect the AR8035-A PHY. As a result, the emac + * driver bails out early and the user has no ethernet. + * In order to stay compatible with existing configurations, the + * driver will temporarily switch to the internal clock, after + * the first reset fails. */ if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX)) { - if (dev->phy_address == 0xffffffff && - dev->phy_map == 0xffffffff) { + if (try_internal_clock || (dev->phy_address == 0xffffffff && + dev->phy_map == 0xffffffff)) { /* No PHY: select internal loop clock before reset */ dcri_clrset(SDR0, SDR0_ETH_CFG, 0, SDR0_ETH_CFG_ECS << dev->cell_index); @@ -389,8 +400,15 @@ static int emac_reset(struct emac_instan #ifdef CONFIG_PPC_DCR_NATIVE if (emac_has_feature(dev, EMAC_FTR_460EX_PHY_CLK_FIX)) { - if (dev->phy_address == 0xffffffff && - dev->phy_map == 0xffffffff) { + if (!n && !try_internal_clock) { + /* first attempt has timed out. */ + n = 20; + try_internal_clock = true; + goto do_retry; + } + + if (try_internal_clock || (dev->phy_address == 0xffffffff && + dev->phy_map == 0xffffffff)) { /* No PHY: restore external clock source after reset */ dcri_clrset(SDR0, SDR0_ETH_CFG, SDR0_ETH_CFG_ECS << dev->cell_index, 0); Patches currently in stable-queue which might be from chunkeey(a)googlemail.com are queue-3.18/net-emac-fix-reset-timeout-with-ar8035-phy.patch

6 years, 9 months

1
0
0 0

Patch "neighbour: update neigh timestamps iff update is effective" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled neighbour: update neigh timestamps iff update is effective to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: neighbour-update-neigh-timestamps-iff-update-is-effective.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 13:58:07 CEST 2018 From: Ihar Hrachyshka <ihrachys(a)redhat.com> Date: Tue, 16 May 2017 08:44:24 -0700 Subject: neighbour: update neigh timestamps iff update is effective From: Ihar Hrachyshka <ihrachys(a)redhat.com> [ Upstream commit 77d7123342dcf6442341b67816321d71da8b2b16 ] It's a common practice to send gratuitous ARPs after moving an IP address to another device to speed up healing of a service. To fulfill service availability constraints, the timing of network peers updating their caches to point to a new location of an IP address can be particularly important. Sometimes neigh_update calls won't touch neither lladdr nor state, for example if an update arrives in locktime interval. The neigh->updated value is tested by the protocol specific neigh code, which in turn will influence whether NEIGH_UPDATE_F_OVERRIDE gets set in the call to neigh_update() or not. As a result, we may effectively ignore the update request, bailing out of touching the neigh entry, except that we still bump its timestamps inside neigh_update. This may be a problem for updates arriving in quick succession. For example, consider the following scenario: A service is moved to another device with its IP address. The new device sends three gratuitous ARP requests into the network with ~1 seconds interval between them. Just before the first request arrives to one of network peer nodes, its neigh entry for the IP address transitions from STALE to DELAY. This transition, among other things, updates neigh->updated. Once the kernel receives the first gratuitous ARP, it ignores it because its arrival time is inside the locktime interval. The kernel still bumps neigh->updated. Then the second gratuitous ARP request arrives, and it's also ignored because it's still in the (new) locktime interval. Same happens for the third request. The node eventually heals itself (after delay_first_probe_time seconds since the initial transition to DELAY state), but it just wasted some time and require a new ARP request/reply round trip. This unfortunate behaviour both puts more load on the network, as well as reduces service availability. This patch changes neigh_update so that it bumps neigh->updated (as well as neigh->confirmed) only once we are sure that either lladdr or entry state will change). In the scenario described above, it means that the second gratuitous ARP request will actually update the entry lladdr. Ideally, we would update the neigh entry on the very first gratuitous ARP request. The locktime mechanism is designed to ignore ARP updates in a short timeframe after a previous ARP update was honoured by the kernel layer. This would require tracking timestamps for state transitions separately from timestamps when actual updates are received. This would probably involve changes in neighbour struct. Therefore, the patch doesn't tackle the issue of the first gratuitous APR ignored, leaving it for a follow-up. Signed-off-by: Ihar Hrachyshka <ihrachys(a)redhat.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/core/neighbour.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -1147,10 +1147,6 @@ int neigh_update(struct neighbour *neigh lladdr = neigh->ha; } - if (new & NUD_CONNECTED) - neigh->confirmed = jiffies; - neigh->updated = jiffies; - /* If entry was valid and address is not changed, do not change entry state, if new one is STALE. */ @@ -1174,6 +1170,16 @@ int neigh_update(struct neighbour *neigh } } + /* Update timestamps only once we know we will make a change to the + * neighbour entry. Otherwise we risk to move the locktime window with + * noop updates and ignore relevant ARP updates. + */ + if (new != old || lladdr != neigh->ha) { + if (new & NUD_CONNECTED) + neigh->confirmed = jiffies; + neigh->updated = jiffies; + } + if (new != old) { neigh_del_timer(neigh); if (new & NUD_IN_TIMER) Patches currently in stable-queue which might be from ihrachys(a)redhat.com are queue-3.18/neighbour-update-neigh-timestamps-iff-update-is-effective.patch

6 years, 9 months

1
0
0 0

Patch "MIPS: mm: fixed mappings: correct initialisation" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled MIPS: mm: fixed mappings: correct initialisation to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mips-mm-fixed-mappings-correct-initialisation.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Tue Apr 10 13:58:07 CEST 2018 From: Marcin Nowakowski <marcin.nowakowski(a)imgtec.com> Date: Tue, 11 Apr 2017 09:00:34 +0200 Subject: MIPS: mm: fixed mappings: correct initialisation From: Marcin Nowakowski <marcin.nowakowski(a)imgtec.com> [ Upstream commit 71eb989ab5a110df8bcbb9609bacde73feacbedd ] fixrange_init operates at PMD-granularity and expects the addresses to be PMD-size aligned, but currently that might not be the case for PKMAP_BASE unless it is defined properly, so ensure a correct alignment is used before passing the address to fixrange_init. fixed mappings: only align the start address that is passed to fixrange_init rather than the value before adding the size, as we may end up with uninitialised upper part of the range. Signed-off-by: Marcin Nowakowski <marcin.nowakowski(a)imgtec.com> Cc: linux-mips(a)linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15948/ Signed-off-by: Ralf Baechle <ralf(a)linux-mips.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/mips/mm/pgtable-32.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) --- a/arch/mips/mm/pgtable-32.c +++ b/arch/mips/mm/pgtable-32.c @@ -51,15 +51,15 @@ void __init pagetable_init(void) /* * Fixed mappings: */ - vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK; - fixrange_init(vaddr, vaddr + FIXADDR_SIZE, pgd_base); + vaddr = __fix_to_virt(__end_of_fixed_addresses - 1); + fixrange_init(vaddr & PMD_MASK, vaddr + FIXADDR_SIZE, pgd_base); #ifdef CONFIG_HIGHMEM /* * Permanent kmaps: */ vaddr = PKMAP_BASE; - fixrange_init(vaddr, vaddr + PAGE_SIZE*LAST_PKMAP, pgd_base); + fixrange_init(vaddr & PMD_MASK, vaddr + PAGE_SIZE*LAST_PKMAP, pgd_base); pgd = swapper_pg_dir + __pgd_offset(vaddr); pud = pud_offset(pgd, vaddr); Patches currently in stable-queue which might be from marcin.nowakowski(a)imgtec.com are queue-3.18/mips-mm-fixed-mappings-correct-initialisation.patch queue-3.18/mips-kprobes-flush_insn_slot-should-flush-only-if-probe-initialised.patch

6 years, 9 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror April 2018