April 2018 - Linux-stable-mirror

usb: gadget: f_hid: pick "Prevent accessing released memory" to 4.4.y

by Jerry Zhang

Commit aa65d11aa008f4de "usb: gadget: f_hid: fix: Prevent accessing released memory" should be added to linux-4.4.y (it's already in 4.9 and 4.14). Thanks, Jerry

6 years, 8 months

2
7
0 0

[stable:v4.15] drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.

by Dhinakaran Pandiyan

If bios sets up an MST output and hardware state readout code sees this is an SST configuration, when disabling the encoder we end up calling ->post_disable_dp() hook instead of the MST version. Consequently, we write to the DP_SET_POWER dpcd to set it D3 state. Further along when we try enable the encoder in MST mode, POWER_UP_PHY transaction fails to power up the MST hub. This results in continuous link training failures which keep the system busy delaying boot. We could identify bios MST boot discrepancy and handle it accordingly but a simple way to solve this is to write to the DP_SET_POWER dpcd for MST too. v2: Rebased on stable/linux-4.15.y and fixed minor conflict. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105470 Cc: Ville Syrjälä <ville.syrjala(a)linux.intel.com> Cc: Jani Nikula <jani.nikula(a)intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala(a)linux.intel.com> Reported-by: Laura Abbott <labbott(a)redhat.com> Cc: <stable(a)vger.kernel.org> # 4.15+ Fixes: 5ea2355a100a ("drm/i915/mst: Use MST sideband message transactions for dpms control") Tested-by: Laura Abbott <labbott(a)redhat.com> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan(a)intel.com> Signed-off-by: Jani Nikula <jani.nikula(a)intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180314054825.1718-1-dhinaka… (cherry picked from commit ad260ab32a4d94fa974f58262f8000472d34fd5b) Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan(a)intel.com> --- drivers/gpu/drm/i915/intel_ddi.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c index 58a3755544b2..38e53d6b8127 100644 --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -2208,8 +2208,7 @@ static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder, intel_prepare_dp_ddi_buffers(encoder); intel_ddi_init_dp_buf_reg(encoder); - if (!is_mst) - intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON); + intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON); intel_dp_start_link_train(intel_dp); if (port != PORT_A || INTEL_GEN(dev_priv) >= 9) intel_dp_stop_link_train(intel_dp); @@ -2294,19 +2293,12 @@ static void intel_ddi_post_disable_dp(struct intel_encoder *encoder, struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base); struct intel_dp *intel_dp = &dig_port->dp; - /* - * old_crtc_state and old_conn_state are NULL when called from - * DP_MST. The main connector associated with this port is never - * bound to a crtc for MST. - */ - bool is_mst = !old_crtc_state; /* * Power down sink before disabling the port, otherwise we end * up getting interrupts from the sink on detecting link loss. */ - if (!is_mst) - intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF); + intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF); intel_disable_ddi_buf(encoder); -- 2.14.1

6 years, 8 months

4
3
0 0

Patch "usb: dwc2: Improve gadget state disconnection handling" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: dwc2: Improve gadget state disconnection handling to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-dwc2-improve-gadget-state-disconnection-handling.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From d2471d4a24dfbff5e463d382e2c6fec7d7e25a09 Mon Sep 17 00:00:00 2001 From: John Stultz <john.stultz(a)linaro.org> Date: Mon, 23 Oct 2017 14:32:48 -0700 Subject: usb: dwc2: Improve gadget state disconnection handling From: John Stultz <john.stultz(a)linaro.org> commit d2471d4a24dfbff5e463d382e2c6fec7d7e25a09 upstream. In the earlier commit dad3f793f20f ("usb: dwc2: Make sure we disconnect the gadget state"), I was trying to fix up the fact that we somehow weren't disconnecting the gadget state, so that when the OTG port was plugged in the second time we would get warnings about the state tracking being wrong. (This seems to be due to a quirk of the HiKey board where we do not ever get any otg interrupts, particularly the session end detected signal. Instead we only see status change interrupt.) The fix there was somewhat simple, as it just made sure to call dwc2_hsotg_disconnect() before we connected things up in OTG mode, ensuring the state handling didn't throw errors. But in looking at a different issue I was seeing with UDC state handling, I realized that it would be much better to call dwc2_hsotg_disconnect when we get the state change signal moving to host mode. Thus, this patch removes the earlier disconnect call I added and moves it (and the needed locking) to the host mode transition. Cc: Wei Xu <xuwei5(a)hisilicon.com> Cc: Guodong Xu <guodong.xu(a)linaro.org> Cc: Amit Pundir <amit.pundir(a)linaro.org> Cc: YongQin Liu <yongqin.liu(a)linaro.org> Cc: John Youn <johnyoun(a)synopsys.com> Cc: Minas Harutyunyan <Minas.Harutyunyan(a)synopsys.com> Cc: Douglas Anderson <dianders(a)chromium.org> Cc: Chen Yu <chenyu56(a)huawei.com> Cc: Felipe Balbi <felipe.balbi(a)linux.intel.com> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: linux-usb(a)vger.kernel.org Acked-by: Minas Harutyunyan <hminas(a)synopsys.com> Tested-by: Minas Harutyunyan <hminas(a)synopsys.com> Signed-off-by: John Stultz <john.stultz(a)linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com> Cc: Ben Hutchings <ben.hutchings(a)codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/dwc2/hcd.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -3220,7 +3220,6 @@ static void dwc2_conn_id_status_change(s dwc2_core_init(hsotg, false); dwc2_enable_global_interrupts(hsotg); spin_lock_irqsave(&hsotg->lock, flags); - dwc2_hsotg_disconnect(hsotg); dwc2_hsotg_core_init_disconnected(hsotg, false); spin_unlock_irqrestore(&hsotg->lock, flags); dwc2_hsotg_core_connect(hsotg); @@ -3238,8 +3237,12 @@ static void dwc2_conn_id_status_change(s if (count > 250) dev_err(hsotg->dev, "Connection id status change timed out\n"); - hsotg->op_state = OTG_STATE_A_HOST; + spin_lock_irqsave(&hsotg->lock, flags); + dwc2_hsotg_disconnect(hsotg); + spin_unlock_irqrestore(&hsotg->lock, flags); + + hsotg->op_state = OTG_STATE_A_HOST; /* Initialize the Core for Host mode */ dwc2_core_init(hsotg, false); dwc2_enable_global_interrupts(hsotg); Patches currently in stable-queue which might be from john.stultz(a)linaro.org are queue-4.9/usb-dwc2-improve-gadget-state-disconnection-handling.patch

6 years, 8 months

1
0
0 0

Patch "usb: dwc2: Improve gadget state disconnection handling" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: dwc2: Improve gadget state disconnection handling to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-dwc2-improve-gadget-state-disconnection-handling.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From d2471d4a24dfbff5e463d382e2c6fec7d7e25a09 Mon Sep 17 00:00:00 2001 From: John Stultz <john.stultz(a)linaro.org> Date: Mon, 23 Oct 2017 14:32:48 -0700 Subject: usb: dwc2: Improve gadget state disconnection handling From: John Stultz <john.stultz(a)linaro.org> commit d2471d4a24dfbff5e463d382e2c6fec7d7e25a09 upstream. In the earlier commit dad3f793f20f ("usb: dwc2: Make sure we disconnect the gadget state"), I was trying to fix up the fact that we somehow weren't disconnecting the gadget state, so that when the OTG port was plugged in the second time we would get warnings about the state tracking being wrong. (This seems to be due to a quirk of the HiKey board where we do not ever get any otg interrupts, particularly the session end detected signal. Instead we only see status change interrupt.) The fix there was somewhat simple, as it just made sure to call dwc2_hsotg_disconnect() before we connected things up in OTG mode, ensuring the state handling didn't throw errors. But in looking at a different issue I was seeing with UDC state handling, I realized that it would be much better to call dwc2_hsotg_disconnect when we get the state change signal moving to host mode. Thus, this patch removes the earlier disconnect call I added and moves it (and the needed locking) to the host mode transition. Cc: Wei Xu <xuwei5(a)hisilicon.com> Cc: Guodong Xu <guodong.xu(a)linaro.org> Cc: Amit Pundir <amit.pundir(a)linaro.org> Cc: YongQin Liu <yongqin.liu(a)linaro.org> Cc: John Youn <johnyoun(a)synopsys.com> Cc: Minas Harutyunyan <Minas.Harutyunyan(a)synopsys.com> Cc: Douglas Anderson <dianders(a)chromium.org> Cc: Chen Yu <chenyu56(a)huawei.com> Cc: Felipe Balbi <felipe.balbi(a)linux.intel.com> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: linux-usb(a)vger.kernel.org Acked-by: Minas Harutyunyan <hminas(a)synopsys.com> Tested-by: Minas Harutyunyan <hminas(a)synopsys.com> Signed-off-by: John Stultz <john.stultz(a)linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com> Cc: Ben Hutchings <ben.hutchings(a)codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/dwc2/hcd.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -1385,7 +1385,6 @@ static void dwc2_conn_id_status_change(s dwc2_core_init(hsotg, false, -1); dwc2_enable_global_interrupts(hsotg); spin_lock_irqsave(&hsotg->lock, flags); - dwc2_hsotg_disconnect(hsotg); dwc2_hsotg_core_init_disconnected(hsotg, false); spin_unlock_irqrestore(&hsotg->lock, flags); dwc2_hsotg_core_connect(hsotg); @@ -1403,8 +1402,12 @@ static void dwc2_conn_id_status_change(s if (count > 250) dev_err(hsotg->dev, "Connection id status change timed out\n"); - hsotg->op_state = OTG_STATE_A_HOST; + spin_lock_irqsave(&hsotg->lock, flags); + dwc2_hsotg_disconnect(hsotg); + spin_unlock_irqrestore(&hsotg->lock, flags); + + hsotg->op_state = OTG_STATE_A_HOST; /* Initialize the Core for Host mode */ dwc2_core_init(hsotg, false, -1); dwc2_enable_global_interrupts(hsotg); Patches currently in stable-queue which might be from john.stultz(a)linaro.org are queue-4.4/usb-dwc2-improve-gadget-state-disconnection-handling.patch

6 years, 8 months

1
0
0 0

Patch "drm/i915/dp: Write to SET_POWER dpcd to enable MST hub." has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled drm/i915/dp: Write to SET_POWER dpcd to enable MST hub. to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drm-i915-dp-write-to-set_power-dpcd-to-enable-mst-hub.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From b1e314462bba76660eec62760bb2e87f28f58866 Mon Sep 17 00:00:00 2001 From: Dhinakaran Pandiyan <dhinakaran.pandiyan(a)intel.com> Date: Tue, 13 Mar 2018 22:48:25 -0700 Subject: drm/i915/dp: Write to SET_POWER dpcd to enable MST hub. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit From: Dhinakaran Pandiyan <dhinakaran.pandiyan(a)intel.com> commit b1e314462bba76660eec62760bb2e87f28f58866 upstream. If bios sets up an MST output and hardware state readout code sees this is an SST configuration, when disabling the encoder we end up calling ->post_disable_dp() hook instead of the MST version. Consequently, we write to the DP_SET_POWER dpcd to set it D3 state. Further along when we try enable the encoder in MST mode, POWER_UP_PHY transaction fails to power up the MST hub. This results in continuous link training failures which keep the system busy delaying boot. We could identify bios MST boot discrepancy and handle it accordingly but a simple way to solve this is to write to the DP_SET_POWER dpcd for MST too. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105470 Cc: Ville Syrjälä <ville.syrjala(a)linux.intel.com> Cc: Jani Nikula <jani.nikula(a)intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala(a)linux.intel.com> Reported-by: Laura Abbott <labbott(a)redhat.com> Cc: stable(a)vger.kernel.org Fixes: 5ea2355a100a ("drm/i915/mst: Use MST sideband message transactions for dpms control") Tested-by: Laura Abbott <labbott(a)redhat.com> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan(a)intel.com> Signed-off-by: Jani Nikula <jani.nikula(a)intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180314054825.1718-1-dhinaka… (cherry picked from commit ad260ab32a4d94fa974f58262f8000472d34fd5b) Signed-off-by: Rodrigo Vivi <rodrigo.vivi(a)intel.com> Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan(a)intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpu/drm/i915/intel_ddi.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) --- a/drivers/gpu/drm/i915/intel_ddi.c +++ b/drivers/gpu/drm/i915/intel_ddi.c @@ -2208,8 +2208,7 @@ static void intel_ddi_pre_enable_dp(stru intel_prepare_dp_ddi_buffers(encoder); intel_ddi_init_dp_buf_reg(encoder); - if (!is_mst) - intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON); + intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON); intel_dp_start_link_train(intel_dp); if (port != PORT_A || INTEL_GEN(dev_priv) >= 9) intel_dp_stop_link_train(intel_dp); @@ -2294,19 +2293,12 @@ static void intel_ddi_post_disable_dp(st struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base); struct intel_dp *intel_dp = &dig_port->dp; - /* - * old_crtc_state and old_conn_state are NULL when called from - * DP_MST. The main connector associated with this port is never - * bound to a crtc for MST. - */ - bool is_mst = !old_crtc_state; /* * Power down sink before disabling the port, otherwise we end * up getting interrupts from the sink on detecting link loss. */ - if (!is_mst) - intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF); + intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF); intel_disable_ddi_buf(encoder); Patches currently in stable-queue which might be from dhinakaran.pandiyan(a)intel.com are queue-4.15/drm-i915-dp-write-to-set_power-dpcd-to-enable-mst-hub.patch

6 years, 8 months

1
0
0 0

Patch "usb: dwc2: Improve gadget state disconnection handling" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: dwc2: Improve gadget state disconnection handling to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-dwc2-improve-gadget-state-disconnection-handling.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From d2471d4a24dfbff5e463d382e2c6fec7d7e25a09 Mon Sep 17 00:00:00 2001 From: John Stultz <john.stultz(a)linaro.org> Date: Mon, 23 Oct 2017 14:32:48 -0700 Subject: usb: dwc2: Improve gadget state disconnection handling From: John Stultz <john.stultz(a)linaro.org> commit d2471d4a24dfbff5e463d382e2c6fec7d7e25a09 upstream. In the earlier commit dad3f793f20f ("usb: dwc2: Make sure we disconnect the gadget state"), I was trying to fix up the fact that we somehow weren't disconnecting the gadget state, so that when the OTG port was plugged in the second time we would get warnings about the state tracking being wrong. (This seems to be due to a quirk of the HiKey board where we do not ever get any otg interrupts, particularly the session end detected signal. Instead we only see status change interrupt.) The fix there was somewhat simple, as it just made sure to call dwc2_hsotg_disconnect() before we connected things up in OTG mode, ensuring the state handling didn't throw errors. But in looking at a different issue I was seeing with UDC state handling, I realized that it would be much better to call dwc2_hsotg_disconnect when we get the state change signal moving to host mode. Thus, this patch removes the earlier disconnect call I added and moves it (and the needed locking) to the host mode transition. Cc: Wei Xu <xuwei5(a)hisilicon.com> Cc: Guodong Xu <guodong.xu(a)linaro.org> Cc: Amit Pundir <amit.pundir(a)linaro.org> Cc: YongQin Liu <yongqin.liu(a)linaro.org> Cc: John Youn <johnyoun(a)synopsys.com> Cc: Minas Harutyunyan <Minas.Harutyunyan(a)synopsys.com> Cc: Douglas Anderson <dianders(a)chromium.org> Cc: Chen Yu <chenyu56(a)huawei.com> Cc: Felipe Balbi <felipe.balbi(a)linux.intel.com> Cc: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Cc: linux-usb(a)vger.kernel.org Acked-by: Minas Harutyunyan <hminas(a)synopsys.com> Tested-by: Minas Harutyunyan <hminas(a)synopsys.com> Signed-off-by: John Stultz <john.stultz(a)linaro.org> Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com> Cc: Ben Hutchings <ben.hutchings(a)codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/dwc2/hcd.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -3277,7 +3277,6 @@ static void dwc2_conn_id_status_change(s dwc2_core_init(hsotg, false); dwc2_enable_global_interrupts(hsotg); spin_lock_irqsave(&hsotg->lock, flags); - dwc2_hsotg_disconnect(hsotg); dwc2_hsotg_core_init_disconnected(hsotg, false); spin_unlock_irqrestore(&hsotg->lock, flags); dwc2_hsotg_core_connect(hsotg); @@ -3296,8 +3295,12 @@ host: if (count > 250) dev_err(hsotg->dev, "Connection id status change timed out\n"); - hsotg->op_state = OTG_STATE_A_HOST; + spin_lock_irqsave(&hsotg->lock, flags); + dwc2_hsotg_disconnect(hsotg); + spin_unlock_irqrestore(&hsotg->lock, flags); + + hsotg->op_state = OTG_STATE_A_HOST; /* Initialize the Core for Host mode */ dwc2_core_init(hsotg, false); dwc2_enable_global_interrupts(hsotg); Patches currently in stable-queue which might be from john.stultz(a)linaro.org are queue-4.14/usb-dwc2-improve-gadget-state-disconnection-handling.patch

6 years, 8 months

1
0
0 0

Patch "[media] vb2: V4L2_BUF_FLAG_DONE is set after DQBUF" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled [media] vb2: V4L2_BUF_FLAG_DONE is set after DQBUF to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: vb2-v4l2_buf_flag_done-is-set-after-dqbuf.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 3171cc2b4eb9831ab4df1d80d0410a945b8bc84e Mon Sep 17 00:00:00 2001 From: Ricardo Ribalda <ricardo.ribalda(a)gmail.com> Date: Mon, 20 Jun 2016 09:47:22 -0300 Subject: [media] vb2: V4L2_BUF_FLAG_DONE is set after DQBUF From: Ricardo Ribalda <ricardo.ribalda(a)gmail.com> commit 3171cc2b4eb9831ab4df1d80d0410a945b8bc84e upstream. According to the doc, V4L2_BUF_FLAG_DONE is cleared after DQBUF: V4L2_BUF_FLAG_DONE 0x00000004 ... After calling the VIDIOC_QBUF or VIDIOC_DQBUF it is always cleared ... Unfortunately, it seems that videobuf2 keeps it set after DQBUF. This can be tested with vivid and dev_debug: [257604.338082] video1: VIDIOC_DQBUF: 71:33:25.00260479 index=3, type=vid-cap, flags=0x00002004, field=none, sequence=163, memory=userptr, bytesused=460800, offset/userptr=0x344b000, length=460800 This patch forces FLAG_DONE to 0 after calling DQBUF. Reported-by: Dimitrios Katsaros <patcherwork(a)gmail.com> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda(a)gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil(a)cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/v4l2-core/videobuf2-core.c | 5 +++++ 1 file changed, 5 insertions(+) --- a/drivers/media/v4l2-core/videobuf2-core.c +++ b/drivers/media/v4l2-core/videobuf2-core.c @@ -2075,6 +2075,11 @@ static int vb2_internal_dqbuf(struct vb2 dprintk(1, "dqbuf of buffer %d, with state %d\n", vb->v4l2_buf.index, vb->state); + /* + * After calling the VIDIOC_DQBUF V4L2_BUF_FLAG_DONE must be + * cleared. + */ + b->flags &= ~V4L2_BUF_FLAG_DONE; return 0; } Patches currently in stable-queue which might be from ricardo.ribalda(a)gmail.com are queue-3.18/vb2-v4l2_buf_flag_done-is-set-after-dqbuf.patch

6 years, 8 months

1
0
0 0

Patch "media: v4l2-ioctl.c: don't copy back the result for -ENOTTY" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled media: v4l2-ioctl.c: don't copy back the result for -ENOTTY to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: media-v4l2-ioctl.c-don-t-copy-back-the-result-for-enotty.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 181a4a2d5a0a7b43cab08a70710d727e7764ccdd Mon Sep 17 00:00:00 2001 From: Hans Verkuil <hans.verkuil(a)cisco.com> Date: Tue, 30 Jan 2018 03:50:01 -0500 Subject: media: v4l2-ioctl.c: don't copy back the result for -ENOTTY From: Hans Verkuil <hans.verkuil(a)cisco.com> commit 181a4a2d5a0a7b43cab08a70710d727e7764ccdd upstream. If the ioctl returned -ENOTTY, then don't bother copying back the result as there is no point. Signed-off-by: Hans Verkuil <hans.verkuil(a)cisco.com> Acked-by: Sakari Ailus <sakari.ailus(a)linux.intel.com> Cc: <stable(a)vger.kernel.org> # for v4.15 and up Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/v4l2-core/v4l2-ioctl.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) --- a/drivers/media/v4l2-core/v4l2-ioctl.c +++ b/drivers/media/v4l2-core/v4l2-ioctl.c @@ -2539,8 +2539,11 @@ video_usercopy(struct file *file, unsign /* Handles IOCTL */ err = func(file, cmd, parg); - if (err == -ENOIOCTLCMD) + if (err == -ENOTTY || err == -ENOIOCTLCMD) { err = -ENOTTY; + goto out; + } + if (err == 0) { if (cmd == VIDIOC_DQBUF) trace_v4l2_dqbuf(video_devdata(file)->minor, parg); Patches currently in stable-queue which might be from hans.verkuil(a)cisco.com are queue-3.18/vb2-v4l2_buf_flag_done-is-set-after-dqbuf.patch queue-3.18/media-v4l2-ioctl.c-don-t-copy-back-the-result-for-enotty.patch

6 years, 8 months

1
0
0 0

Patch "scsi: virtio_scsi: always read VPD pages for multiqueue too" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: virtio_scsi: always read VPD pages for multiqueue too to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-virtio_scsi-always-read-vpd-pages-for-multiqueue-too.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From a680f1d463aeaeb00d22af257a56e111967c2f18 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini <pbonzini(a)redhat.com> Date: Wed, 5 Jul 2017 10:30:56 +0200 Subject: scsi: virtio_scsi: always read VPD pages for multiqueue too From: Paolo Bonzini <pbonzini(a)redhat.com> commit a680f1d463aeaeb00d22af257a56e111967c2f18 upstream. Multi-queue virtio-scsi uses a different scsi_host_template struct. Add the .device_alloc field there, too. Fixes: 25d1d50e23275e141e3a3fe06c25a99f4c4bf4e0 Cc: stable(a)vger.kernel.org Cc: David Gibson <david(a)gibson.dropbear.id.au> Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> Reviewed-by: Fam Zheng <famz(a)redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha(a)redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Cc: Ben Hutchings <ben.hutchings(a)codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/virtio_scsi.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/scsi/virtio_scsi.c +++ b/drivers/scsi/virtio_scsi.c @@ -819,6 +819,7 @@ static struct scsi_host_template virtscs .change_queue_depth = virtscsi_change_queue_depth, .eh_abort_handler = virtscsi_abort, .eh_device_reset_handler = virtscsi_device_reset, + .slave_alloc = virtscsi_device_alloc, .can_queue = 1024, .dma_boundary = UINT_MAX, Patches currently in stable-queue which might be from pbonzini(a)redhat.com are queue-4.9/scsi-virtio_scsi-always-read-vpd-pages-for-multiqueue-too.patch

6 years, 8 months

1
0
0 0

Patch "scsi: virtio_scsi: always read VPD pages for multiqueue too" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: virtio_scsi: always read VPD pages for multiqueue too to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-virtio_scsi-always-read-vpd-pages-for-multiqueue-too.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From a680f1d463aeaeb00d22af257a56e111967c2f18 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini <pbonzini(a)redhat.com> Date: Wed, 5 Jul 2017 10:30:56 +0200 Subject: scsi: virtio_scsi: always read VPD pages for multiqueue too From: Paolo Bonzini <pbonzini(a)redhat.com> commit a680f1d463aeaeb00d22af257a56e111967c2f18 upstream. Multi-queue virtio-scsi uses a different scsi_host_template struct. Add the .device_alloc field there, too. Fixes: 25d1d50e23275e141e3a3fe06c25a99f4c4bf4e0 Cc: stable(a)vger.kernel.org Cc: David Gibson <david(a)gibson.dropbear.id.au> Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> Reviewed-by: Fam Zheng <famz(a)redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha(a)redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Cc: Ben Hutchings <ben.hutchings(a)codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/virtio_scsi.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/scsi/virtio_scsi.c +++ b/drivers/scsi/virtio_scsi.c @@ -819,6 +819,7 @@ static struct scsi_host_template virtscs .eh_abort_handler = virtscsi_abort, .eh_device_reset_handler = virtscsi_device_reset, + .slave_alloc = virtscsi_device_alloc, .can_queue = 1024, .dma_boundary = UINT_MAX, .use_clustering = ENABLE_CLUSTERING, Patches currently in stable-queue which might be from pbonzini(a)redhat.com are queue-4.4/scsi-virtio_scsi-always-read-vpd-pages-for-multiqueue-too.patch

6 years, 8 months

1
0
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror April 2018