April 2018 - Linux-stable-mirror

Patch "Bluetooth: hci_bcm: Add 6 new ACPI HIDs" has been added to the 4.16-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Bluetooth: hci_bcm: Add 6 new ACPI HIDs to the 4.16-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bluetooth-hci_bcm-add-6-new-acpi-hids.patch and it can be found in the queue-4.16 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 4063cafa3b24ff04635bdedc97cd3e4320415065 Mon Sep 17 00:00:00 2001 From: Hans de Goede <hdegoede(a)redhat.com> Date: Fri, 16 Mar 2018 21:28:09 +0100 Subject: Bluetooth: hci_bcm: Add 6 new ACPI HIDs From: Hans de Goede <hdegoede(a)redhat.com> commit 4063cafa3b24ff04635bdedc97cd3e4320415065 upstream. Add 6 new ACPI HIDs to enable bluetooth on devices using these HIDs, I've tested the following HIDs / devices: BCM2E74: Jumper ezPad mini 3 BCM2E83: Acer Iconia Tab8 w1-810 BCM2E90: Meegopad T08 BCM2EAA: Chuwi Vi8 plus (CWI519) The reporter of Red Hat bugzilla 1554835 has tested: BCM2E84: Lenovo Yoga2 The reporter of kernel bugzilla 274481 has tested: BCM2E38: Toshiba Encore Note the Lenovo Yoga2 and Toshiba Encore also needs the earlier patch to treat all Interrupt ACPI resources as active low. Cc: stable(a)vger.kernel.org Buglink: https://bugzilla.kernel.org/attachment.cgi?id=274481 Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=1554835 Reported-and-tested-by: Robert R. Howell <rhowell(a)uwyo.edu> Reported-and-tested-by: Christian Herzog <daduke(a)daduke.org> Tested-by: Hans de Goede <hdegoede(a)redhat.com> Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Signed-off-by: Marcel Holtmann <marcel(a)holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/bluetooth/hci_bcm.c | 6 ++++++ 1 file changed, 6 insertions(+) --- a/drivers/bluetooth/hci_bcm.c +++ b/drivers/bluetooth/hci_bcm.c @@ -1080,6 +1080,7 @@ static const struct hci_uart_proto bcm_p #ifdef CONFIG_ACPI static const struct acpi_device_id bcm_acpi_match[] = { { "BCM2E1A", (kernel_ulong_t)&acpi_bcm_int_last_gpios }, + { "BCM2E38", (kernel_ulong_t)&acpi_bcm_int_last_gpios }, { "BCM2E39", (kernel_ulong_t)&acpi_bcm_int_last_gpios }, { "BCM2E3A", (kernel_ulong_t)&acpi_bcm_int_last_gpios }, { "BCM2E3D", (kernel_ulong_t)&acpi_bcm_int_last_gpios }, @@ -1092,12 +1093,17 @@ static const struct acpi_device_id bcm_a { "BCM2E67", (kernel_ulong_t)&acpi_bcm_int_last_gpios }, { "BCM2E71", (kernel_ulong_t)&acpi_bcm_int_last_gpios }, { "BCM2E72", (kernel_ulong_t)&acpi_bcm_int_last_gpios }, + { "BCM2E74", (kernel_ulong_t)&acpi_bcm_int_last_gpios }, { "BCM2E7B", (kernel_ulong_t)&acpi_bcm_int_last_gpios }, { "BCM2E7C", (kernel_ulong_t)&acpi_bcm_int_last_gpios }, { "BCM2E7E", (kernel_ulong_t)&acpi_bcm_int_first_gpios }, + { "BCM2E83", (kernel_ulong_t)&acpi_bcm_int_first_gpios }, + { "BCM2E84", (kernel_ulong_t)&acpi_bcm_int_last_gpios }, + { "BCM2E90", (kernel_ulong_t)&acpi_bcm_int_last_gpios }, { "BCM2E95", (kernel_ulong_t)&acpi_bcm_int_first_gpios }, { "BCM2E96", (kernel_ulong_t)&acpi_bcm_int_first_gpios }, { "BCM2EA4", (kernel_ulong_t)&acpi_bcm_int_first_gpios }, + { "BCM2EAA", (kernel_ulong_t)&acpi_bcm_int_first_gpios }, { }, }; MODULE_DEVICE_TABLE(acpi, bcm_acpi_match); Patches currently in stable-queue which might be from hdegoede(a)redhat.com are queue-4.16/bluetooth-hci_bcm-add-6-new-acpi-hids.patch

6 years, 9 months

1
0
0 0

[PATCH] libata: blacklist Micron 500IT SSD with MU01 firmware

by Sudip Mukherjee

While whitelisting Micron M500DC drives, the tweaked blacklist entry enabled queued TRIM from M500IT variants also. But these do not support queued TRIM. And while using those SSDs with the latest kernel we have seen errors and even the partition table getting corrupted. Some part from the dmesg: [ 6.727384] ata1.00: ATA-9: Micron_M500IT_MTFDDAK060MBD, MU01, max UDMA/133 [ 6.727390] ata1.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 6.741026] ata1.00: supports DRM functions and may not be fully accessible [ 6.759887] ata1.00: configured for UDMA/133 [ 6.762256] scsi 0:0:0:0: Direct-Access ATA Micron_M500IT_MT MU01 PQ: 0 ANSI: 5 and then for the error: [ 120.860334] ata1.00: exception Emask 0x1 SAct 0x7ffc0007 SErr 0x0 action 0x6 frozen [ 120.860338] ata1.00: irq_stat 0x40000008 [ 120.860342] ata1.00: failed command: SEND FPDMA QUEUED [ 120.860351] ata1.00: cmd 64/01:00:00:00:00/00:00:00:00:00/a0 tag 0 ncq dma 512 out res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x5 (timeout) [ 120.860353] ata1.00: status: { DRDY } [ 120.860543] ata1: hard resetting link [ 121.166128] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 121.166376] ata1.00: supports DRM functions and may not be fully accessible [ 121.186238] ata1.00: supports DRM functions and may not be fully accessible [ 121.204445] ata1.00: configured for UDMA/133 [ 121.204454] ata1.00: device reported invalid CHS sector 0 [ 121.204541] sd 0:0:0:0: [sda] tag#18 UNKNOWN(0x2003) Result: hostbyte=0x00 driverbyte=0x08 [ 121.204546] sd 0:0:0:0: [sda] tag#18 Sense Key : 0x5 [current] [ 121.204550] sd 0:0:0:0: [sda] tag#18 ASC=0x21 ASCQ=0x4 [ 121.204555] sd 0:0:0:0: [sda] tag#18 CDB: opcode=0x93 93 08 00 00 00 00 00 04 28 80 00 00 00 30 00 00 [ 121.204559] print_req_error: I/O error, dev sda, sector 272512 After few reboots with these errors, and the SSD is corrupted. After blacklisting it, the errors are not seen and the SSD does not get corrupted any more. Fixes: 243918be6393 ("libata: Do not blacklist Micron M500DC") Cc: stable(a)vger.kernel.org Signed-off-by: Sudip Mukherjee <sudipm.mukherjee(a)gmail.com> --- drivers/ata/libata-core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index cb789f8..1fb96c6 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4539,6 +4539,8 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { ATA_HORKAGE_NOLPM, }, /* devices that don't properly handle queued TRIM commands */ + { "Micron_M500IT_*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM | + ATA_HORKAGE_ZERO_AFTER_TRIM, }, { "Micron_M500_*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | ATA_HORKAGE_ZERO_AFTER_TRIM, }, { "Crucial_CT*M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | -- 2.1.4

6 years, 9 months

2
5
0 0

+ mm-ksm-fix-inconsistent-accounting-of-zero-pages.patch added to -mm tree

by akpm＠linux-foundation.org

The patch titled Subject: mm/ksm.c: fix inconsistent accounting of zero pages has been added to the -mm tree. Its filename is mm-ksm-fix-inconsistent-accounting-of-zero-pages.patch This patch should soon appear at http://ozlabs.org/~akpm/mmots/broken-out/mm-ksm-fix-inconsistent-accounting… and later at http://ozlabs.org/~akpm/mmotm/broken-out/mm-ksm-fix-inconsistent-accounting… Before you just go and hit "reply", please: a) Consider who else should be cc'ed b) Prefer to cc a suitable mailing list as well c) Ideally: find the original patch on the mailing list and do a reply-to-all to that, adding suitable additional cc's *** Remember to use Documentation/process/submit-checklist.rst when testing your code *** The -mm tree is included into linux-next and is updated there every 3-4 working days ------------------------------------------------------ From: Claudio Imbrenda <imbrenda(a)linux.vnet.ibm.com> Subject: mm/ksm.c: fix inconsistent accounting of zero pages When using KSM with use_zero_pages, we replace anonymous pages containing only zeroes with actual zero pages, which are not anonymous. We need to do proper accounting of the mm counters, otherwise we will get wrong values in /proc and a BUG message in dmesg when tearing down the mm. Link: http://lkml.kernel.org/r/1522931274-15552-1-git-send-email-imbrenda@linux.v… Fixes: e86c59b1b1 ("mm/ksm: improve deduplication of zero pages with colouring") Signed-off-by: Claudio Imbrenda <imbrenda(a)linux.vnet.ibm.com> Reviewed-by: Andrew Morton <akpm(a)linux-foundation.org> Cc: Andrea Arcangeli <aarcange(a)redhat.com> Cc: Minchan Kim <minchan(a)kernel.org> Cc: Kirill A. Shutemov <kirill.shutemov(a)linux.intel.com> Cc: Hugh Dickins <hughd(a)google.com> Cc: Christian Borntraeger <borntraeger(a)de.ibm.com> Cc: Gerald Schaefer <gerald.schaefer(a)de.ibm.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> --- mm/ksm.c | 7 +++++++ 1 file changed, 7 insertions(+) diff -puN mm/ksm.c~mm-ksm-fix-inconsistent-accounting-of-zero-pages mm/ksm.c --- a/mm/ksm.c~mm-ksm-fix-inconsistent-accounting-of-zero-pages +++ a/mm/ksm.c @@ -1131,6 +1131,13 @@ static int replace_page(struct vm_area_s } else { newpte = pte_mkspecial(pfn_pte(page_to_pfn(kpage), vma->vm_page_prot)); + /* + * We're replacing an anonymous page with a zero page, which is + * not anonymous. We need to do proper accounting otherwise we + * will get wrong values in /proc, and a BUG message in dmesg + * when tearing down the mm. + */ + dec_mm_counter(mm, MM_ANONPAGES); } flush_cache_page(vma, addr, pte_pfn(*ptep)); _ Patches currently in -mm which might be from imbrenda(a)linux.vnet.ibm.com are mm-ksm-fix-interaction-with-thp.patch mm-ksm-fix-inconsistent-accounting-of-zero-pages.patch

6 years, 9 months

1
0
0 0

Patches for stable

by Juergen Gross

Please add the patches: commit 038bac2b02989acf1fc938cedcb7944c02672b9f upstream commit dfc9327ab7c99bc13e12106448615efba833886b upstream commit b17d9d1df3c33a4f1d2bf397e2257aecf9dc56d4 upstream to the 4.15 and 4.16 stable kernels. Those patches are needed to boot Linux as PVH guest on recent Xen. In PVH mode there is no guarantee the kernel can find the RSDP table at the legacy location in low memory, which is a requirement for the kernel to boot successful without those patches. For kernel 4.14 I'll send a slightly modified version of the patches soon. Juergen

6 years, 9 months

5
19
0 0

Patch "USB: serial: ftdi_sio: add support for Harman FirmwareHubEmulator" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: serial: ftdi_sio: add support for Harman FirmwareHubEmulator to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-serial-ftdi_sio-add-support-for-harman-firmwarehubemulator.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 6555ad13a01952c16485c82a52ad1f3e07e34b3a Mon Sep 17 00:00:00 2001 From: Clemens Werther <clemens.werther(a)gmail.com> Date: Fri, 16 Mar 2018 10:20:46 +0100 Subject: USB: serial: ftdi_sio: add support for Harman FirmwareHubEmulator From: Clemens Werther <clemens.werther(a)gmail.com> commit 6555ad13a01952c16485c82a52ad1f3e07e34b3a upstream. Add device id for Harman FirmwareHubEmulator to make the device auto-detectable by the driver. Signed-off-by: Clemens Werther <clemens.werther(a)gmail.com> Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Johan Hovold <johan(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++ 2 files changed, 7 insertions(+) --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -936,6 +936,7 @@ static const struct usb_device_id id_tab { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CINTERION_MC55I_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_FHE_PID) }, { USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) }, { USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1444,6 +1444,12 @@ #define FTDI_CINTERION_MC55I_PID 0xA951 /* + * Product: FirmwareHubEmulator + * Manufacturer: Harman Becker Automotive Systems + */ +#define FTDI_FHE_PID 0xA9A0 + +/* * Product: Comet Caller ID decoder * Manufacturer: Crucible Technologies */ Patches currently in stable-queue which might be from clemens.werther(a)gmail.com are queue-4.9/usb-serial-ftdi_sio-add-support-for-harman-firmwarehubemulator.patch

6 years, 9 months

1
0
0 0

Patch "USB: serial: cp210x: add ELDAT Easywave RX09 id" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: serial: cp210x: add ELDAT Easywave RX09 id to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-serial-cp210x-add-eldat-easywave-rx09-id.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 1f1e82f74c0947e40144688c9e36abe4b3999f49 Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan(a)kernel.org> Date: Tue, 6 Mar 2018 09:32:43 +0100 Subject: USB: serial: cp210x: add ELDAT Easywave RX09 id From: Johan Hovold <johan(a)kernel.org> commit 1f1e82f74c0947e40144688c9e36abe4b3999f49 upstream. Add device id for ELDAT Easywave RX09 tranceiver. Reported-by: Jan Jansen <nattelip(a)hotmail.com> Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Johan Hovold <johan(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/serial/cp210x.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -152,6 +152,7 @@ static const struct usb_device_id id_tab { USB_DEVICE(0x12B8, 0xEC62) }, /* Link G4+ ECU */ { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */ { USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */ + { USB_DEVICE(0x155A, 0x1006) }, /* ELDAT Easywave RX09 */ { USB_DEVICE(0x166A, 0x0201) }, /* Clipsal 5500PACA C-Bus Pascal Automation Controller */ { USB_DEVICE(0x166A, 0x0301) }, /* Clipsal 5800PC C-Bus Wireless PC Interface */ { USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */ Patches currently in stable-queue which might be from johan(a)kernel.org are queue-4.9/usb-serial-ftdi_sio-add-support-for-harman-firmwarehubemulator.patch queue-4.9/usb-serial-ftdi_sio-add-rt-systems-vx-8-cable.patch queue-4.9/usb-serial-cp210x-add-eldat-easywave-rx09-id.patch

6 years, 9 months

1
0
0 0

Patch "USB: serial: ftdi_sio: add RT Systems VX-8 cable" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: serial: ftdi_sio: add RT Systems VX-8 cable to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-serial-ftdi_sio-add-rt-systems-vx-8-cable.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 9608e5c0f079390473b484ef92334dfd3431bb89 Mon Sep 17 00:00:00 2001 From: Major Hayden <major(a)mhtx.net> Date: Fri, 23 Feb 2018 14:29:54 -0600 Subject: USB: serial: ftdi_sio: add RT Systems VX-8 cable From: Major Hayden <major(a)mhtx.net> commit 9608e5c0f079390473b484ef92334dfd3431bb89 upstream. This patch adds a device ID for the RT Systems cable used to program Yaesu VX-8R/VX-8DR handheld radios. It uses the main FTDI VID instead of the common RT Systems VID. Signed-off-by: Major Hayden <major(a)mhtx.net> Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Johan Hovold <johan(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio_ids.h | 3 +++ 2 files changed, 4 insertions(+) --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -773,6 +773,7 @@ static const struct usb_device_id id_tab .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, { USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) }, { USB_DEVICE(NOVITUS_VID, NOVITUS_BONO_E_PID) }, + { USB_DEVICE(FTDI_VID, RTSYSTEMS_USB_VX8_PID) }, { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_S03_PID) }, { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_59_PID) }, { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_USB_57A_PID) }, --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -922,6 +922,9 @@ /* * RT Systems programming cables for various ham radios */ +/* This device uses the VID of FTDI */ +#define RTSYSTEMS_USB_VX8_PID 0x9e50 /* USB-VX8 USB to 7 pin modular plug for Yaesu VX-8 radio */ + #define RTSYSTEMS_VID 0x2100 /* Vendor ID */ #define RTSYSTEMS_USB_S03_PID 0x9001 /* RTS-03 USB to Serial Adapter */ #define RTSYSTEMS_USB_59_PID 0x9e50 /* USB-59 USB to 8 pin plug */ Patches currently in stable-queue which might be from major(a)mhtx.net are queue-4.9/usb-serial-ftdi_sio-add-rt-systems-vx-8-cable.patch

6 years, 9 months

1
0
0 0

Patch "mei: remove dev_err message on an unsupported ioctl" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mei: remove dev_err message on an unsupported ioctl to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mei-remove-dev_err-message-on-an-unsupported-ioctl.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From bb0829a741792b56c908d7745bc0b2b540293bcc Mon Sep 17 00:00:00 2001 From: Colin Ian King <colin.king(a)canonical.com> Date: Tue, 27 Feb 2018 16:21:05 +0000 Subject: mei: remove dev_err message on an unsupported ioctl From: Colin Ian King <colin.king(a)canonical.com> commit bb0829a741792b56c908d7745bc0b2b540293bcc upstream. Currently the driver spams the kernel log on unsupported ioctls which is unnecessary as the ioctl returns -ENOIOCTLCMD to indicate this anyway. I suspect this was originally for debugging purposes but it really is not required so remove it. Signed-off-by: Colin Ian King <colin.king(a)canonical.com> Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/misc/mei/main.c | 1 - 1 file changed, 1 deletion(-) --- a/drivers/misc/mei/main.c +++ b/drivers/misc/mei/main.c @@ -551,7 +551,6 @@ static long mei_ioctl(struct file *file, break; default: - dev_err(dev->dev, ": unsupported ioctl %d.\n", cmd); rets = -ENOIOCTLCMD; } Patches currently in stable-queue which might be from colin.king(a)canonical.com are queue-4.9/mei-remove-dev_err-message-on-an-unsupported-ioctl.patch

6 years, 9 months

1
0
0 0

Patch "parport_pc: Add support for WCH CH382L PCI-E single parallel port card." has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled parport_pc: Add support for WCH CH382L PCI-E single parallel port card. to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: parport_pc-add-support-for-wch-ch382l-pci-e-single-parallel-port-card.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 823f7923833c6cc2b16e601546d607dcfb368004 Mon Sep 17 00:00:00 2001 From: Alexander Gerasiov <gq(a)redlab-i.ru> Date: Sun, 4 Feb 2018 02:50:22 +0300 Subject: parport_pc: Add support for WCH CH382L PCI-E single parallel port card. From: Alexander Gerasiov <gq(a)redlab-i.ru> commit 823f7923833c6cc2b16e601546d607dcfb368004 upstream. WCH CH382L is a PCI-E adapter with 1 parallel port. It is similair to CH382 but serial ports are not soldered on board. Detected as Serial controller: Device 1c00:3050 (rev 10) (prog-if 05 [16850]) Signed-off-by: Alexander Gerasiov <gq(a)redlab-i.ru> Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/parport/parport_pc.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -2646,6 +2646,7 @@ enum parport_pc_pci_cards { netmos_9901, netmos_9865, quatech_sppxp100, + wch_ch382l, }; @@ -2708,6 +2709,7 @@ static struct parport_pc_pci { /* netmos_9901 */ { 1, { { 0, -1 }, } }, /* netmos_9865 */ { 1, { { 0, -1 }, } }, /* quatech_sppxp100 */ { 1, { { 0, 1 }, } }, + /* wch_ch382l */ { 1, { { 2, -1 }, } }, }; static const struct pci_device_id parport_pc_pci_tbl[] = { @@ -2797,6 +2799,8 @@ static const struct pci_device_id parpor /* Quatech SPPXP-100 Parallel port PCI ExpressCard */ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SPPXP_100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 }, + /* WCH CH382L PCI-E single parallel port card */ + { 0x1c00, 0x3050, 0x1c00, 0x3050, 0, 0, wch_ch382l }, { 0, } /* terminate list */ }; MODULE_DEVICE_TABLE(pci, parport_pc_pci_tbl); Patches currently in stable-queue which might be from gq(a)redlab-i.ru are queue-4.9/parport_pc-add-support-for-wch-ch382l-pci-e-single-parallel-port-card.patch

6 years, 9 months

1
0
0 0

Patch "media: usbtv: prevent double free in error case" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled media: usbtv: prevent double free in error case to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: media-usbtv-prevent-double-free-in-error-case.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 50e7044535537b2a54c7ab798cd34c7f6d900bd2 Mon Sep 17 00:00:00 2001 From: Oliver Neukum <oneukum(a)suse.com> Date: Mon, 8 Jan 2018 09:21:07 -0500 Subject: media: usbtv: prevent double free in error case From: Oliver Neukum <oneukum(a)suse.com> commit 50e7044535537b2a54c7ab798cd34c7f6d900bd2 upstream. Quoting the original report: It looks like there is a double-free vulnerability in Linux usbtv driver on an error path of usbtv_probe function. When audio registration fails, usbtv_video_free function ends up freeing usbtv data structure, which gets freed the second time under usbtv_video_fail label. usbtv_audio_fail: usbtv_video_free(usbtv); => v4l2_device_put(&usbtv->v4l2_dev); => v4l2_device_put => kref_put => v4l2_device_release => usbtv_release (CALLBACK) => kfree(usbtv) (1st time) usbtv_video_fail: usb_set_intfdata(intf, NULL); usb_put_dev(usbtv->udev); kfree(usbtv); (2nd time) So, as we have refcounting, use it Reported-by: Yavuz, Tuba <tuba(a)ece.ufl.edu> Signed-off-by: Oliver Neukum <oneukum(a)suse.com> CC: stable(a)vger.kernel.org Signed-off-by: Hans Verkuil <hans.verkuil(a)cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/usb/usbtv/usbtv-core.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/media/usb/usbtv/usbtv-core.c +++ b/drivers/media/usb/usbtv/usbtv-core.c @@ -109,6 +109,8 @@ static int usbtv_probe(struct usb_interf return 0; usbtv_audio_fail: + /* we must not free at this point */ + usb_get_dev(usbtv->udev); usbtv_video_free(usbtv); usbtv_video_fail: Patches currently in stable-queue which might be from oneukum(a)suse.com are queue-4.9/media-usbtv-prevent-double-free-in-error-case.patch

6 years, 9 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror April 2018