April 2018 - Linux-stable-mirror

Patch "Documentation: pinctrl: palmas: Add ti, palmas-powerhold-override property definition" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Documentation: pinctrl: palmas: Add ti,palmas-powerhold-override property definition to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: documentation-pinctrl-palmas-add-ti-palmas-powerhold-override-property-definition.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 0ea66f76ba17a4b229caaadd77de694111b21769 Mon Sep 17 00:00:00 2001 From: Keerthy <j-keerthy(a)ti.com> Date: Mon, 28 Nov 2016 09:31:58 +0530 Subject: Documentation: pinctrl: palmas: Add ti,palmas-powerhold-override property definition From: Keerthy <j-keerthy(a)ti.com> commit 0ea66f76ba17a4b229caaadd77de694111b21769 upstream. GPIO7 is configured in POWERHOLD mode which has higher priority over DEV_ON bit and keeps the PMIC supplies on even after the DEV_ON bit is turned off. This property enables driver to over ride the POWERHOLD value to GPIO7 so as to turn off the PMIC in power off scenarios. Signed-off-by: Keerthy <j-keerthy(a)ti.com> Acked-by: Rob Herring <robh(a)kernel.org> Signed-off-by: Linus Walleij <linus.walleij(a)linaro.org> Cc: Ben Hutchings <ben.hutchings(a)codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- Documentation/devicetree/bindings/pinctrl/pinctrl-palmas.txt | 9 +++++++++ 1 file changed, 9 insertions(+) --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-palmas.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-palmas.txt @@ -35,6 +35,15 @@ Optional properties: - ti,palmas-enable-dvfs2: Enable DVFS2. Configure pins for DVFS2 mode. Selection primary or secondary function associated to GPADC_START and SYSEN2 pin/pad for DVFS2 interface +- ti,palmas-override-powerhold: This is applicable for PMICs for which + GPIO7 is configured in POWERHOLD mode which has higher priority + over DEV_ON bit and keeps the PMIC supplies on even after the DEV_ON + bit is turned off. This property enables driver to over ride the + POWERHOLD value to GPIO7 so as to turn off the PMIC in power off + scenarios. So for GPIO7 if ti,palmas-override-powerhold is set + then the GPIO_7 field should never be muxed to anything else. + It should be set to POWERHOLD by default and only in case of + power off scenarios the driver will over ride the mux value. This binding uses the following generic properties as defined in pinctrl-bindings.txt: Patches currently in stable-queue which might be from j-keerthy(a)ti.com are queue-4.4/documentation-pinctrl-palmas-add-ti-palmas-powerhold-override-property-definition.patch queue-4.4/arm-dts-am57xx-beagle-x15-common-add-overide-powerhold-property.patch queue-4.4/arm-dts-dra7-add-power-hold-and-power-controller-properties-to-palmas.patch

6 years, 9 months

1
0
0 0

Patch "ARM: dts: dra7: Add power hold and power controller properties to palmas" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: dra7: Add power hold and power controller properties to palmas to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-dra7-add-power-hold-and-power-controller-properties-to-palmas.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 7c62de5f3fc92291decc0dac5f36949bdc3fb575 Mon Sep 17 00:00:00 2001 From: Keerthy <j-keerthy(a)ti.com> Date: Thu, 13 Apr 2017 10:21:21 +0530 Subject: ARM: dts: dra7: Add power hold and power controller properties to palmas From: Keerthy <j-keerthy(a)ti.com> commit 7c62de5f3fc92291decc0dac5f36949bdc3fb575 upstream. Add power hold and power controller properties to palmas node. This is needed to shutdown pmic correctly on boards with powerhold set. Signed-off-by: Keerthy <j-keerthy(a)ti.com> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Cc: Ben Hutchings <ben.hutchings(a)codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/dra7-evm.dts | 2 ++ 1 file changed, 2 insertions(+) --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -410,6 +410,8 @@ tps659038: tps659038@58 { compatible = "ti,tps659038"; reg = <0x58>; + ti,palmas-override-powerhold; + ti,system-power-controller; tps659038_pmic { compatible = "ti,tps659038-pmic"; Patches currently in stable-queue which might be from j-keerthy(a)ti.com are queue-4.4/documentation-pinctrl-palmas-add-ti-palmas-powerhold-override-property-definition.patch queue-4.4/arm-dts-am57xx-beagle-x15-common-add-overide-powerhold-property.patch queue-4.4/arm-dts-dra7-add-power-hold-and-power-controller-properties-to-palmas.patch

6 years, 9 months

1
0
0 0

Patch "ARM: dts: am57xx-beagle-x15-common: Add overide powerhold property" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: am57xx-beagle-x15-common: Add overide powerhold property to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-am57xx-beagle-x15-common-add-overide-powerhold-property.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 1f166499ce006b3770a3166122eda64e160736ab Mon Sep 17 00:00:00 2001 From: Keerthy <j-keerthy(a)ti.com> Date: Thu, 10 Nov 2016 10:39:19 +0530 Subject: ARM: dts: am57xx-beagle-x15-common: Add overide powerhold property From: Keerthy <j-keerthy(a)ti.com> commit 1f166499ce006b3770a3166122eda64e160736ab upstream. The PMICs have POWERHOLD set by default which prevents PMIC shutdown even on DEV_CTRL On bit set to 0 as the Powerhold has higher priority. So to enable pmic power off this property lets one over ride the default value and enable pmic power off. Signed-off-by: Keerthy <j-keerthy(a)ti.com> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Cc: Ben Hutchings <ben.hutchings(a)codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/am57xx-beagle-x15.dts | 1 + 1 file changed, 1 insertion(+) --- a/arch/arm/boot/dts/am57xx-beagle-x15.dts +++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts @@ -411,6 +411,7 @@ interrupt-controller; ti,system-power-controller; + ti,palmas-override-powerhold; tps659038_pmic { compatible = "ti,tps659038-pmic"; Patches currently in stable-queue which might be from j-keerthy(a)ti.com are queue-4.4/documentation-pinctrl-palmas-add-ti-palmas-powerhold-override-property-definition.patch queue-4.4/arm-dts-am57xx-beagle-x15-common-add-overide-powerhold-property.patch queue-4.4/arm-dts-dra7-add-power-hold-and-power-controller-properties-to-palmas.patch

6 years, 9 months

1
0
0 0

Patch "vt: change SGR 21 to follow the standards" has been added to the 4.16-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled vt: change SGR 21 to follow the standards to the 4.16-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: vt-change-sgr-21-to-follow-the-standards.patch and it can be found in the queue-4.16 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 65d9982d7e523a1a8e7c9af012da0d166f72fc56 Mon Sep 17 00:00:00 2001 From: Mike Frysinger <vapier(a)chromium.org> Date: Mon, 29 Jan 2018 17:08:21 -0500 Subject: vt: change SGR 21 to follow the standards From: Mike Frysinger <vapier(a)chromium.org> commit 65d9982d7e523a1a8e7c9af012da0d166f72fc56 upstream. ECMA-48 [1] (aka ISO 6429) has defined SGR 21 as "doubly underlined" since at least March 1984. The Linux kernel has treated it as SGR 22 "normal intensity" since it was added in Linux-0.96b in June 1992. Before that, it was simply ignored. Other terminal emulators have either ignored it, or treat it as double underline now. xterm for example added support in its 304 release (May 2014) [2] where it was previously ignoring it. Changing this behavior shouldn't be an issue: - It isn't a named capability in ncurses's terminfo database, so no script is using libtinfo/libcurses to look this up, or using tput to query & output the right sequence. - Any script assuming SGR 21 will reset intensity in all terminals already do not work correctly on non-Linux VTs (including running under screen/tmux/etc...). - If someone has written a script that only runs in the Linux VT, and they're using SGR 21 (instead of SGR 22), the output should still be readable. imo it's important to change this as the Linux VT's non-conformance is sometimes used as an argument for other terminal emulators to not implement SGR 21 at all, or do so incorrectly. [1]: https://www.ecma-international.org/publications/standards/Ecma-048.htm [2]: https://github.com/ThomasDickey/xterm-snapshots/commit/2fd29cb98d214cb536bc… Signed-off-by: Mike Frysinger <vapier(a)chromium.org> Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/vt/vt.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -1354,6 +1354,11 @@ static void csi_m(struct vc_data *vc) case 3: vc->vc_italic = 1; break; + case 21: + /* + * No console drivers support double underline, so + * convert it to a single underline. + */ case 4: vc->vc_underline = 1; break; @@ -1389,7 +1394,6 @@ static void csi_m(struct vc_data *vc) vc->vc_disp_ctrl = 1; vc->vc_toggle_meta = 1; break; - case 21: case 22: vc->vc_intensity = 1; break; Patches currently in stable-queue which might be from vapier(a)chromium.org are queue-4.16/vt-change-sgr-21-to-follow-the-standards.patch

6 years, 9 months

1
0
0 0

Patch "staging: comedi: ni_mio_common: ack ai fifo error interrupts." has been added to the 4.16-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled staging: comedi: ni_mio_common: ack ai fifo error interrupts. to the 4.16-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: staging-comedi-ni_mio_common-ack-ai-fifo-error-interrupts.patch and it can be found in the queue-4.16 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From e1d9fc04c41840a4688ef6ce90b6dcca157ea4d7 Mon Sep 17 00:00:00 2001 From: Frank Mori Hess <fmh6jj(a)gmail.com> Date: Thu, 15 Mar 2018 10:25:44 +0000 Subject: staging: comedi: ni_mio_common: ack ai fifo error interrupts. From: Frank Mori Hess <fmh6jj(a)gmail.com> commit e1d9fc04c41840a4688ef6ce90b6dcca157ea4d7 upstream. Ack ai fifo error interrupts in interrupt handler to clear interrupt after fifo overflow. It should prevent lock-ups after the ai fifo overflows. Cc: <stable(a)vger.kernel.org> # v4.2+ Signed-off-by: Frank Mori Hess <fmh6jj(a)gmail.com> Signed-off-by: Ian Abbott <abbotti(a)mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/staging/comedi/drivers/ni_mio_common.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/staging/comedi/drivers/ni_mio_common.c +++ b/drivers/staging/comedi/drivers/ni_mio_common.c @@ -1275,6 +1275,8 @@ static void ack_a_interrupt(struct comed ack |= NISTC_INTA_ACK_AI_START; if (a_status & NISTC_AI_STATUS1_STOP) ack |= NISTC_INTA_ACK_AI_STOP; + if (a_status & NISTC_AI_STATUS1_OVER) + ack |= NISTC_INTA_ACK_AI_ERR; if (ack) ni_stc_writew(dev, ack, NISTC_INTA_ACK_REG); } Patches currently in stable-queue which might be from fmh6jj(a)gmail.com are queue-4.16/staging-comedi-ni_mio_common-ack-ai-fifo-error-interrupts.patch

6 years, 9 months

1
0
0 0

Patch "siox: fix possible buffer overflow in device_add_store" has been added to the 4.16-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled siox: fix possible buffer overflow in device_add_store to the 4.16-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: siox-fix-possible-buffer-overflow-in-device_add_store.patch and it can be found in the queue-4.16 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From f87deada80fe483e2286e29cd866dc66ddc2b6bc Mon Sep 17 00:00:00 2001 From: Gavin Schenk <g.schenk(a)eckelmann.de> Date: Wed, 14 Feb 2018 15:25:02 +0100 Subject: siox: fix possible buffer overflow in device_add_store MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit From: Gavin Schenk <g.schenk(a)eckelmann.de> commit f87deada80fe483e2286e29cd866dc66ddc2b6bc upstream. Width 20 given in format string is larger than destination buffer 'type[20]', use %19s to prevent overflowing it. Fixes: bbecb07fa0af ("siox: new driver framework for eckelmann SIOX") Cc: stable <stable(a)vger.kernel.org> Reported-by: David Binderman <dcb314(a)hotmail.com> Signed-off-by: Gavin Schenk <g.schenk(a)eckelmann.de> Reviewed-by: Uwe Kleine-König <u.kleine-koenig(a)pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/siox/siox-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/siox/siox-core.c +++ b/drivers/siox/siox-core.c @@ -594,7 +594,7 @@ static ssize_t device_add_store(struct d size_t inbytes = 0, outbytes = 0; u8 statustype = 0; - ret = sscanf(buf, "%20s %zu %zu %hhu", type, &inbytes, + ret = sscanf(buf, "%19s %zu %zu %hhu", type, &inbytes, &outbytes, &statustype); if (ret != 3 && ret != 4) return -EINVAL; Patches currently in stable-queue which might be from g.schenk(a)eckelmann.de are queue-4.16/siox-fix-possible-buffer-overflow-in-device_add_store.patch

6 years, 9 months

1
0
0 0

Patch "signal: Correct the offset of si_pkey and si_lower in struct siginfo on m68k" has been added to the 4.16-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled signal: Correct the offset of si_pkey and si_lower in struct siginfo on m68k to the 4.16-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: signal-correct-the-offset-of-si_pkey-and-si_lower-in-struct-siginfo-on-m68k.patch and it can be found in the queue-4.16 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 8420f71943ae96dcd78da5bd4a5c2827419d340c Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" <ebiederm(a)xmission.com> Date: Mon, 2 Apr 2018 14:45:42 -0500 Subject: signal: Correct the offset of si_pkey and si_lower in struct siginfo on m68k From: Eric W. Biederman <ebiederm(a)xmission.com> commit 8420f71943ae96dcd78da5bd4a5c2827419d340c upstream. The change moving addr_lsb into the _sigfault union failed to take into account that _sigfault._addr_bnd._lower being a pointer forced the entire union to have pointer alignment. The fix for _sigfault._addr_bnd._lower having pointer alignment failed to take into account that m68k has a pointer alignment less than the size of a pointer. So simply making the padding members pointers changed the location of later members in the structure. Fix this by directly computing the needed size of the padding members, and making the padding members char arrays of the needed size. AKA if __alignof__(void *) is 1 sizeof(short) otherwise __alignof__(void *). Which should be exactly the same rules the compiler whould have used when computing the padding. I have tested this change by adding BUILD_BUG_ONs to m68k to verify the offset of every member of struct siginfo, and with those testing that the offsets of the fields in struct siginfo is the same before I changed the generic _sigfault member and after the correction to the _sigfault member. I have also verified that the x86 with it's own BUILD_BUG_ONs to verify the offsets of the siginfo members also compiles cleanly. Cc: stable(a)vger.kernel.org Reported-by: Eugene Syromiatnikov <esyr(a)redhat.com> Fixes: 859d880cf544 ("signal: Correct the offset of si_pkey in struct siginfo") Fixes: b68a68d3dcc1 ("signal: Move addr_lsb into the _sigfault union for clarity") Signed-off-by: "Eric W. Biederman" <ebiederm(a)xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- include/linux/compat.h | 6 ++++-- include/uapi/asm-generic/siginfo.h | 7 +++++-- 2 files changed, 9 insertions(+), 4 deletions(-) --- a/include/linux/compat.h +++ b/include/linux/compat.h @@ -222,6 +222,8 @@ typedef struct compat_siginfo { #ifdef __ARCH_SI_TRAPNO int _trapno; /* TRAP # which caused the signal */ #endif +#define __COMPAT_ADDR_BND_PKEY_PAD (__alignof__(compat_uptr_t) < sizeof(short) ? \ + sizeof(short) : __alignof__(compat_uptr_t)) union { /* * used when si_code=BUS_MCEERR_AR or @@ -230,13 +232,13 @@ typedef struct compat_siginfo { short int _addr_lsb; /* Valid LSB of the reported address. */ /* used when si_code=SEGV_BNDERR */ struct { - compat_uptr_t _dummy_bnd; + char _dummy_bnd[__COMPAT_ADDR_BND_PKEY_PAD]; compat_uptr_t _lower; compat_uptr_t _upper; } _addr_bnd; /* used when si_code=SEGV_PKUERR */ struct { - compat_uptr_t _dummy_pkey; + char _dummy_pkey[__COMPAT_ADDR_BND_PKEY_PAD]; u32 _pkey; } _addr_pkey; }; --- a/include/uapi/asm-generic/siginfo.h +++ b/include/uapi/asm-generic/siginfo.h @@ -94,6 +94,9 @@ typedef struct siginfo { unsigned int _flags; /* see ia64 si_flags */ unsigned long _isr; /* isr */ #endif + +#define __ADDR_BND_PKEY_PAD (__alignof__(void *) < sizeof(short) ? \ + sizeof(short) : __alignof__(void *)) union { /* * used when si_code=BUS_MCEERR_AR or @@ -102,13 +105,13 @@ typedef struct siginfo { short _addr_lsb; /* LSB of the reported address */ /* used when si_code=SEGV_BNDERR */ struct { - void *_dummy_bnd; + char _dummy_bnd[__ADDR_BND_PKEY_PAD]; void __user *_lower; void __user *_upper; } _addr_bnd; /* used when si_code=SEGV_PKUERR */ struct { - void *_dummy_pkey; + char _dummy_pkey[__ADDR_BND_PKEY_PAD]; __u32 _pkey; } _addr_pkey; }; Patches currently in stable-queue which might be from ebiederm(a)xmission.com are queue-4.16/signal-correct-the-offset-of-si_pkey-and-si_lower-in-struct-siginfo-on-m68k.patch

6 years, 9 months

1
0
0 0

Patch "Revert "base: arch_topology: fix section mismatch build warnings"" has been added to the 4.16-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Revert "base: arch_topology: fix section mismatch build warnings" to the 4.16-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: revert-base-arch_topology-fix-section-mismatch-build-warnings.patch and it can be found in the queue-4.16 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 9de9a449482677a75f1edd2049268a7efc40fc96 Mon Sep 17 00:00:00 2001 From: Gaku Inami <gaku.inami.xh(a)renesas.com> Date: Tue, 13 Feb 2018 11:06:40 +0900 Subject: Revert "base: arch_topology: fix section mismatch build warnings" From: Gaku Inami <gaku.inami.xh(a)renesas.com> commit 9de9a449482677a75f1edd2049268a7efc40fc96 upstream. This reverts commit 452562abb5b7 ("base: arch_topology: fix section mismatch build warnings"). It causes the notifier call hangs in some use-cases. In some cases with using maxcpus, some of cpus are booted first and then the remaining cpus are booted. As an example, some users who want to realize fast boot up often use the following procedure. 1) Define all CPUs on device tree (CA57x4 + CA53x4) 2) Add "maxcpus=4" in bootargs 3) Kernel boot up with CA57x4 4) After kernel boot up, CA53x4 is booted from user When kernel init was finished, CPUFREQ_POLICY_NOTIFIER was not still unregisterd. This means that "__init init_cpu_capacity_callback()" will be called after kernel init sequence. To avoid this problem, it needs to remove __init{,data} annotations by reverting this commit. Also, this commit was needed to fix kernel compile issue below. However, this issue was also fixed by another patch: commit 82d8ba717ccb ("arch_topology: Fix section miss match warning due to free_raw_capacity()") in v4.15 as well. Whereas commit 452562abb5b7 added all the missing __init annotations, commit 82d8ba717ccb removed it from free_raw_capacity(). WARNING: vmlinux.o(.text+0x548f24): Section mismatch in reference from the function init_cpu_capacity_callback() to the variable .init.text:$x The function init_cpu_capacity_callback() references the variable __init $x. This is often because init_cpu_capacity_callback lacks a __init annotation or the annotation of $x is wrong. Fixes: 82d8ba717ccb ("arch_topology: Fix section miss match warning due to free_raw_capacity()") Cc: stable <stable(a)vger.kernel.org> Signed-off-by: Gaku Inami <gaku.inami.xh(a)renesas.com> Reviewed-by: Dietmar Eggemann <dietmar.eggemann(a)arm.com> Tested-by: Dietmar Eggemann <dietmar.eggemann(a)arm.com> Acked-by: Sudeep Holla <sudeep.holla(a)arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/base/arch_topology.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) --- a/drivers/base/arch_topology.c +++ b/drivers/base/arch_topology.c @@ -169,11 +169,11 @@ bool __init topology_parse_cpu_capacity( } #ifdef CONFIG_CPU_FREQ -static cpumask_var_t cpus_to_visit __initdata; -static void __init parsing_done_workfn(struct work_struct *work); -static __initdata DECLARE_WORK(parsing_done_work, parsing_done_workfn); +static cpumask_var_t cpus_to_visit; +static void parsing_done_workfn(struct work_struct *work); +static DECLARE_WORK(parsing_done_work, parsing_done_workfn); -static int __init +static int init_cpu_capacity_callback(struct notifier_block *nb, unsigned long val, void *data) @@ -209,7 +209,7 @@ init_cpu_capacity_callback(struct notifi return 0; } -static struct notifier_block init_cpu_capacity_notifier __initdata = { +static struct notifier_block init_cpu_capacity_notifier = { .notifier_call = init_cpu_capacity_callback, }; @@ -242,7 +242,7 @@ static int __init register_cpufreq_notif } core_initcall(register_cpufreq_notifier); -static void __init parsing_done_workfn(struct work_struct *work) +static void parsing_done_workfn(struct work_struct *work) { cpufreq_unregister_notifier(&init_cpu_capacity_notifier, CPUFREQ_POLICY_NOTIFIER); Patches currently in stable-queue which might be from gaku.inami.xh(a)renesas.com are queue-4.16/revert-base-arch_topology-fix-section-mismatch-build-warnings.patch

6 years, 9 months

1
0
0 0

Patch "Input: i8042 - enable MUX on Sony VAIO VGN-CS series to fix touchpad" has been added to the 4.16-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Input: i8042 - enable MUX on Sony VAIO VGN-CS series to fix touchpad to the 4.16-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: input-i8042-enable-mux-on-sony-vaio-vgn-cs-series-to-fix-touchpad.patch and it can be found in the queue-4.16 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 04bb1719c4de94700056241d4c0fe3c1413f5aff Mon Sep 17 00:00:00 2001 From: Ondrej Zary <linux(a)rainbow-software.org> Date: Tue, 3 Apr 2018 10:24:34 -0700 Subject: Input: i8042 - enable MUX on Sony VAIO VGN-CS series to fix touchpad From: Ondrej Zary <linux(a)rainbow-software.org> commit 04bb1719c4de94700056241d4c0fe3c1413f5aff upstream. The touch sensor buttons on Sony VAIO VGN-CS series laptops (e.g. VGN-CS31S) are a separate PS/2 device. As the MUX is disabled for all VAIO machines by the nomux blacklist, the data from touch sensor buttons and touchpad are combined. The protocol used by the buttons is probably similar to the touchpad protocol (both are Synaptics) so both devices get enabled. The controller combines the data, creating a mess which results in random button clicks, touchpad stopping working and lost sync error messages: psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 4 psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse serio1: issuing reconnect request Add a new i8042_dmi_forcemux_table whitelist with VGN-CS. With MUX enabled, touch sensor buttons are detected as separate device (and left disabled as there's currently no driver), fixing all touchpad problems. Signed-off-by: Ondrej Zary <linux(a)rainbow-software.org> Cc: stable(a)vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/input/serio/i8042-x86ia64io.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -530,6 +530,20 @@ static const struct dmi_system_id __init { } }; +static const struct dmi_system_id i8042_dmi_forcemux_table[] __initconst = { + { + /* + * Sony Vaio VGN-CS series require MUX or the touch sensor + * buttons will disturb touchpad operation + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VGN-CS"), + }, + }, + { } +}; + /* * On some Asus laptops, just running self tests cause problems. */ @@ -1170,6 +1184,9 @@ static int __init i8042_platform_init(vo if (dmi_check_system(i8042_dmi_nomux_table)) i8042_nomux = true; + if (dmi_check_system(i8042_dmi_forcemux_table)) + i8042_nomux = false; + if (dmi_check_system(i8042_dmi_notimeout_table)) i8042_notimeout = true; Patches currently in stable-queue which might be from linux(a)rainbow-software.org are queue-4.16/input-i8042-enable-mux-on-sony-vaio-vgn-cs-series-to-fix-touchpad.patch

6 years, 9 months

1
0
0 0

Patch "Input: i8042 - add Lenovo ThinkPad L460 to i8042 reset list" has been added to the 4.16-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Input: i8042 - add Lenovo ThinkPad L460 to i8042 reset list to the 4.16-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: input-i8042-add-lenovo-thinkpad-l460-to-i8042-reset-list.patch and it can be found in the queue-4.16 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From b56af54ac78c54a519d82813836f305d7f76ef27 Mon Sep 17 00:00:00 2001 From: Dennis Wassenberg <dennis.wassenberg(a)secunet.com> Date: Thu, 8 Mar 2018 15:32:09 -0800 Subject: Input: i8042 - add Lenovo ThinkPad L460 to i8042 reset list From: Dennis Wassenberg <dennis.wassenberg(a)secunet.com> commit b56af54ac78c54a519d82813836f305d7f76ef27 upstream. Reset i8042 before probing because of insufficient BIOS initialisation of the i8042 serial controller. This makes Synaptics touchpad detection possible. Without resetting the Synaptics touchpad is not detected because there are always NACK messages from AUX port. Signed-off-by: Dennis Wassenberg <dennis.wassenberg(a)secunet.com> Cc: stable(a)vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/input/serio/i8042-x86ia64io.h | 7 +++++++ 1 file changed, 7 insertions(+) --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -621,6 +621,13 @@ static const struct dmi_system_id __init }, }, { + /* Lenovo ThinkPad L460 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad L460"), + }, + }, + { /* Clevo P650RS, 650RP6, Sager NP8152-S, and others */ .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Notebook"), Patches currently in stable-queue which might be from dennis.wassenberg(a)secunet.com are queue-4.16/input-i8042-add-lenovo-thinkpad-l460-to-i8042-reset-list.patch

6 years, 9 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror April 2018