April 2018 - Linux-stable-mirror

Patch "vfb: fix video mode and line_length being set when loaded" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled vfb: fix video mode and line_length being set when loaded to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: vfb-fix-video-mode-and-line_length-being-set-when-loaded.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: "Pieter \\\"PoroCYon\\\" Sluys" <pcy(a)national.shitposting.agency> Date: Thu, 4 Jan 2018 16:53:50 +0100 Subject: vfb: fix video mode and line_length being set when loaded From: "Pieter \\\"PoroCYon\\\" Sluys" <pcy(a)national.shitposting.agency> [ Upstream commit 7b9faf5df0ac495a1a3d7cdb64921c179f9008ac ] Currently, when loading the vfb module, the newly created fbdev has a line_length of 0, and its video mode would be PSEUDOCOLOR regardless of color depth. (The former could be worked around by calling the FBIOPUT_VSCREENINFO ioctl with having the FBACTIVIATE_FORCE flag set.) This patch automatically sets the line_length correctly, and the video mode is derived from the bit depth now as well. Thanks to Geert Uytterhoeven for confirming the bug and helping me with the patch. Output of `fbset -i' before the patch: mode "1366x768-60" # D: 72.432 MHz, H: 47.403 kHz, V: 60.004 Hz geometry 1366 768 1366 768 32 timings 13806 120 10 14 3 32 5 rgba 8/0,8/8,8/16,8/24 endmode Frame buffer device information: Name : Virtual FB Address : 0xffffaa1405d85000 Size : 4196352 Type : PACKED PIXELS Visual : PSEUDOCOLOR XPanStep : 1 YPanStep : 1 YWrapStep : 1 LineLength : 0 <-- note this Accelerator : No After: mode "1366x768-60" # D: 72.432 MHz, H: 47.403 kHz, V: 60.004 Hz geometry 1366 768 1366 768 32 timings 13806 120 10 14 3 32 5 rgba 8/0,8/8,8/16,8/24 endmode Frame buffer device information: Name : Virtual FB Address : 0xffffaa1405d85000 Size : 4196352 Type : PACKED PIXELS Visual : TRUECOLOR XPanStep : 1 YPanStep : 1 YWrapStep : 1 LineLength : 5464 Accelerator : No Signed-off-by: "Pieter \"PoroCYon\" Sluys" <pcy(a)national.shitposting.agency> Reviewed-by: Geert Uytterhoeven <geert(a)linux-m68k.org> [b.zolnierkie: minor fixups] Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie(a)samsung.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/video/fbdev/vfb.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) --- a/drivers/video/fbdev/vfb.c +++ b/drivers/video/fbdev/vfb.c @@ -239,8 +239,23 @@ static int vfb_check_var(struct fb_var_s */ static int vfb_set_par(struct fb_info *info) { + switch (info->var.bits_per_pixel) { + case 1: + info->fix.visual = FB_VISUAL_MONO01; + break; + case 8: + info->fix.visual = FB_VISUAL_PSEUDOCOLOR; + break; + case 16: + case 24: + case 32: + info->fix.visual = FB_VISUAL_TRUECOLOR; + break; + } + info->fix.line_length = get_line_length(info->var.xres_virtual, info->var.bits_per_pixel); + return 0; } @@ -450,6 +465,8 @@ static int vfb_probe(struct platform_dev goto err2; platform_set_drvdata(dev, info); + vfb_set_par(info); + fb_info(info, "Virtual frame buffer device, using %ldK of video memory\n", videomemorysize >> 10); return 0; Patches currently in stable-queue which might be from pcy(a)national.shitposting.agency are queue-4.9/vfb-fix-video-mode-and-line_length-being-set-when-loaded.patch

6 years, 9 months

1
0
0 0

Patch "USB: ene_usb6250: fix SCSI residue overwriting" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: ene_usb6250: fix SCSI residue overwriting to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-ene_usb6250-fix-scsi-residue-overwriting.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Alan Stern <stern(a)rowland.harvard.edu> Date: Tue, 16 May 2017 11:47:52 -0400 Subject: USB: ene_usb6250: fix SCSI residue overwriting From: Alan Stern <stern(a)rowland.harvard.edu> [ Upstream commit aa18c4b6e0e39bfb00af48734ec24bc189ac9909 ] In the ene_usb6250 sub-driver for usb-storage, the SCSI residue is not reported correctly. The residue is initialized to 0, but this value is overwritten whenever the driver sends firmware to the card reader before performing the current command. As a result, a valid READ or WRITE operation appears to have failed, causing the SCSI core to retry the command multiple times and eventually fail. This patch fixes the problem by resetting the SCSI residue to 0 after sending firmware to the device. Signed-off-by: Alan Stern <stern(a)rowland.harvard.edu> Reported-and-tested-by: Andreas Hartmann <andihartmann(a)01019freenet.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/storage/ene_ub6250.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/usb/storage/ene_ub6250.c +++ b/drivers/usb/storage/ene_ub6250.c @@ -1942,6 +1942,8 @@ static int ene_load_bincode(struct us_da bcb->CDB[0] = 0xEF; result = ene_send_scsi_cmd(us, FDIR_WRITE, buf, 0); + if (us->srb != NULL) + scsi_set_resid(us->srb, 0); info->BIN_FLAG = flag; kfree(buf); Patches currently in stable-queue which might be from stern(a)rowland.harvard.edu are queue-4.9/usb-ene_usb6250-fix-first-command-execution.patch queue-4.9/usb-ene_usb6250-fix-scsi-residue-overwriting.patch

6 years, 9 months

1
0
0 0

Patch "usb: dwc3: keystone: check return value" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: dwc3: keystone: check return value to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-dwc3-keystone-check-return-value.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Pan Bian <bianpan2016(a)163.com> Date: Sun, 23 Apr 2017 13:55:13 +0800 Subject: usb: dwc3: keystone: check return value From: Pan Bian <bianpan2016(a)163.com> [ Upstream commit 018047a1dba7636e1f7fdae2cc290a528991d648 ] Function devm_clk_get() returns an ERR_PTR when it fails. However, in function kdwc3_probe(), its return value is not checked, which may result in a bad memory access bug. This patch fixes the bug. Signed-off-by: Pan Bian <bianpan2016(a)163.com> Signed-off-by: Felipe Balbi <felipe.balbi(a)linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/dwc3/dwc3-keystone.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/drivers/usb/dwc3/dwc3-keystone.c +++ b/drivers/usb/dwc3/dwc3-keystone.c @@ -107,6 +107,10 @@ static int kdwc3_probe(struct platform_d return PTR_ERR(kdwc->usbss); kdwc->clk = devm_clk_get(kdwc->dev, "usb"); + if (IS_ERR(kdwc->clk)) { + dev_err(kdwc->dev, "unable to get usb clock\n"); + return PTR_ERR(kdwc->clk); + } error = clk_prepare_enable(kdwc->clk); if (error < 0) { Patches currently in stable-queue which might be from bianpan2016(a)163.com are queue-4.9/cx25840-fix-unchecked-return-values.patch queue-4.9/usb-dwc3-keystone-check-return-value.patch queue-4.9/rtc-snvs-fix-an-incorrect-check-of-return-value.patch

6 years, 9 months

1
0
0 0

Patch "USB: ene_usb6250: fix first command execution" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled USB: ene_usb6250: fix first command execution to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-ene_usb6250-fix-first-command-execution.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Alan Stern <stern(a)rowland.harvard.edu> Date: Tue, 16 May 2017 11:47:42 -0400 Subject: USB: ene_usb6250: fix first command execution From: Alan Stern <stern(a)rowland.harvard.edu> [ Upstream commit 4b309f1c4972c8f09e03ac64fc63510dbf5591a4 ] In the ene_usb6250 sub-driver for usb-storage, the ene_transport() routine is supposed to initialize the driver before executing the current command, if the initialization has not already been performed. However, a bug in the routine causes it to skip the command after doing the initialization. Also, the routine does not return an appropriate error code if either the initialization or the command fails. As a result of the first bug, the first command (a SCSI INQUIRY) is not carried out. The results can be seen in the system log, in the form of a warning message and empty or garbage INQUIRY data: Apr 18 22:40:08 notebook2 kernel: scsi host6: scsi scan: INQUIRY result too short (5), using 36 Apr 18 22:40:08 notebook2 kernel: scsi 6:0:0:0: Direct-Access PQ: 0 ANSI: 0 This patch fixes both errors. Signed-off-by: Alan Stern <stern(a)rowland.harvard.edu> Reported-and-tested-by: Andreas Hartmann <andihartmann(a)01019freenet.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/storage/ene_ub6250.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) --- a/drivers/usb/storage/ene_ub6250.c +++ b/drivers/usb/storage/ene_ub6250.c @@ -2295,21 +2295,22 @@ static int ms_scsi_irp(struct us_data *u static int ene_transport(struct scsi_cmnd *srb, struct us_data *us) { - int result = 0; + int result = USB_STOR_XFER_GOOD; struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra); /*US_DEBUG(usb_stor_show_command(us, srb)); */ scsi_set_resid(srb, 0); - if (unlikely(!(info->SD_Status.Ready || info->MS_Status.Ready))) { + if (unlikely(!(info->SD_Status.Ready || info->MS_Status.Ready))) result = ene_init(us); - } else { + if (result == USB_STOR_XFER_GOOD) { + result = USB_STOR_TRANSPORT_ERROR; if (info->SD_Status.Ready) result = sd_scsi_irp(us, srb); if (info->MS_Status.Ready) result = ms_scsi_irp(us, srb); } - return 0; + return result; } static struct scsi_host_template ene_ub6250_host_template; Patches currently in stable-queue which might be from stern(a)rowland.harvard.edu are queue-4.9/usb-ene_usb6250-fix-first-command-execution.patch queue-4.9/usb-ene_usb6250-fix-scsi-residue-overwriting.patch

6 years, 9 months

1
0
0 0

Patch "uio: fix incorrect memory leak cleanup" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled uio: fix incorrect memory leak cleanup to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: uio-fix-incorrect-memory-leak-cleanup.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Suman Anna <s-anna(a)ti.com> Date: Tue, 9 May 2017 18:58:24 -0500 Subject: uio: fix incorrect memory leak cleanup From: Suman Anna <s-anna(a)ti.com> [ Upstream commit 0d83539092ddb1ab79b4d65bccb866bf07ea2ccd ] Commit 75f0aef6220d ("uio: fix memory leak") has fixed up some memory leaks during the failure paths of the addition of uio attributes, but still is not correct entirely. A kobject_uevent() failure still needs a kobject_put() and the kobject container structure allocation failure before the kobject_init() doesn't need a kobject_put(). Fix this properly. Fixes: 75f0aef6220d ("uio: fix memory leak") Signed-off-by: Suman Anna <s-anna(a)ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/uio/uio.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) --- a/drivers/uio/uio.c +++ b/drivers/uio/uio.c @@ -279,7 +279,7 @@ static int uio_dev_add_attributes(struct map = kzalloc(sizeof(*map), GFP_KERNEL); if (!map) { ret = -ENOMEM; - goto err_map_kobj; + goto err_map; } kobject_init(&map->kobj, &map_attr_type); map->mem = mem; @@ -289,7 +289,7 @@ static int uio_dev_add_attributes(struct goto err_map_kobj; ret = kobject_uevent(&map->kobj, KOBJ_ADD); if (ret) - goto err_map; + goto err_map_kobj; } for (pi = 0; pi < MAX_UIO_PORT_REGIONS; pi++) { @@ -308,7 +308,7 @@ static int uio_dev_add_attributes(struct portio = kzalloc(sizeof(*portio), GFP_KERNEL); if (!portio) { ret = -ENOMEM; - goto err_portio_kobj; + goto err_portio; } kobject_init(&portio->kobj, &portio_attr_type); portio->port = port; @@ -319,7 +319,7 @@ static int uio_dev_add_attributes(struct goto err_portio_kobj; ret = kobject_uevent(&portio->kobj, KOBJ_ADD); if (ret) - goto err_portio; + goto err_portio_kobj; } return 0; Patches currently in stable-queue which might be from s-anna(a)ti.com are queue-4.9/arm-davinci-da8xx-create-dsp-device-only-when-assigned-memory.patch queue-4.9/uio-fix-incorrect-memory-leak-cleanup.patch

6 years, 9 months

1
0
0 0

Patch "usb: chipidea: properly handle host or gadget initialization failure" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled usb: chipidea: properly handle host or gadget initialization failure to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: usb-chipidea-properly-handle-host-or-gadget-initialization-failure.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Jisheng Zhang <jszhang(a)marvell.com> Date: Wed, 26 Apr 2017 16:59:34 +0800 Subject: usb: chipidea: properly handle host or gadget initialization failure From: Jisheng Zhang <jszhang(a)marvell.com> [ Upstream commit c4a0bbbdb7f6e3c37fa6deb3ef28c5ed99da6175 ] If ci_hdrc_host_init() or ci_hdrc_gadget_init() returns error and the error != -ENXIO, as Peter pointed out, "it stands for initialization for host or gadget has failed", so we'd better return failure rather continue. And before destroying the otg, i.e ci_hdrc_otg_destroy(ci), we should also check ci->roles[CI_ROLE_GADGET]. Signed-off-by: Jisheng Zhang <jszhang(a)marvell.com> Signed-off-by: Peter Chen <peter.chen(a)nxp.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/usb/chipidea/core.c | 29 +++++++++++++++++++++-------- 1 file changed, 21 insertions(+), 8 deletions(-) --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -839,7 +839,7 @@ static inline void ci_role_destroy(struc { ci_hdrc_gadget_destroy(ci); ci_hdrc_host_destroy(ci); - if (ci->is_otg) + if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) ci_hdrc_otg_destroy(ci); } @@ -939,27 +939,35 @@ static int ci_hdrc_probe(struct platform /* initialize role(s) before the interrupt is requested */ if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_HOST) { ret = ci_hdrc_host_init(ci); - if (ret) - dev_info(dev, "doesn't support host\n"); + if (ret) { + if (ret == -ENXIO) + dev_info(dev, "doesn't support host\n"); + else + goto deinit_phy; + } } if (dr_mode == USB_DR_MODE_OTG || dr_mode == USB_DR_MODE_PERIPHERAL) { ret = ci_hdrc_gadget_init(ci); - if (ret) - dev_info(dev, "doesn't support gadget\n"); + if (ret) { + if (ret == -ENXIO) + dev_info(dev, "doesn't support gadget\n"); + else + goto deinit_host; + } } if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) { dev_err(dev, "no supported roles\n"); ret = -ENODEV; - goto deinit_phy; + goto deinit_gadget; } if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) { ret = ci_hdrc_otg_init(ci); if (ret) { dev_err(dev, "init otg fails, ret = %d\n", ret); - goto stop; + goto deinit_gadget; } } @@ -1024,7 +1032,12 @@ static int ci_hdrc_probe(struct platform ci_extcon_unregister(ci); stop: - ci_role_destroy(ci); + if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) + ci_hdrc_otg_destroy(ci); +deinit_gadget: + ci_hdrc_gadget_destroy(ci); +deinit_host: + ci_hdrc_host_destroy(ci); deinit_phy: ci_usb_phy_exit(ci); Patches currently in stable-queue which might be from jszhang(a)marvell.com are queue-4.9/usb-chipidea-properly-handle-host-or-gadget-initialization-failure.patch

6 years, 9 months

1
0
0 0

Patch "tty: n_gsm: Allow ADM response in addition to UA for control dlci" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled tty: n_gsm: Allow ADM response in addition to UA for control dlci to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: tty-n_gsm-allow-adm-response-in-addition-to-ua-for-control-dlci.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Tony Lindgren <tony(a)atomide.com> Date: Wed, 3 Jan 2018 10:18:03 -0800 Subject: tty: n_gsm: Allow ADM response in addition to UA for control dlci From: Tony Lindgren <tony(a)atomide.com> [ Upstream commit ea3d8465ab9b3e01be329ac5195970a84bef76c5 ] Some devices have the control dlci stay in ADM mode instead of the UA mode. This can seen at least on droid 4 when trying to open the ts 27.010 mux port. Enabling n_gsm debug mode shows the control dlci always respond with DM to SABM instead of UA: # modprobe n_gsm debug=0xff # ldattach -d GSM0710 /dev/ttyS0 & gsmld_output: 00000000: f9 03 3f 01 1c f9 --> 0) C: SABM(P) gsmld_receive: 00000000: f9 03 1f 01 36 f9 <-- 0) C: DM(P) ... $ minicom -D /dev/gsmtty1 minicom: cannot open /dev/gsmtty1: No error information $ strace minicom -D /dev/gsmtty1 ... open("/dev/gsmtty1", O_RDWR|O_NOCTTY|O_NONBLOCK|O_LARGEFILE) = -1 EL2HLT Note that this is different issue from other n_gsm -EL2HLT issues such as timeouts when the control dlci does not respond at all. The ADM mode seems to be a quite common according to "RF Wireless World" article "GSM Issue-UE sends SABM and gets a DM response instead of UA response": This issue is most commonly observed in GSM networks where in UE sends SABM and expects network to send UA response but it ends up receiving DM response from the network. SABM stands for Set asynchronous balanced mode, UA stands for Unnumbered Acknowledge and DA stands for Disconnected Mode. An RLP entity can be in one of two modes: - Asynchronous Balanced Mode (ABM) - Asynchronous Disconnected Mode (ADM) Currently Linux kernel closes the control dlci after several retries in gsm_dlci_t1() on DM. This causes n_gsm /dev/gsmtty ports to produce error code -EL2HLT when trying to open them as the closing of control dlci has already set gsm->dead. Let's fix the issue by allowing control dlci stay in ADM mode after the retries so the /dev/gsmtty ports can be opened and used. It seems that it might take several attempts to get any response from the control dlci, so it's best to allow ADM mode only after the SABM retries are done. Note that for droid 4 additional patches are needed to mux the ttyS0 pins and to toggle RTS gpio_149 to wake up the mdm6600 modem are also needed to use n_gsm. And the mdm6600 modem needs to be powered on. Cc: linux-serial(a)vger.kernel.org Cc: Alan Cox <alan(a)llwyncelyn.cymru> Cc: Jiri Prchal <jiri.prchal(a)aksignal.cz> Cc: Jiri Slaby <jslaby(a)suse.cz> Cc: Marcel Partap <mpartap(a)gmx.net> Cc: Michael Scott <michael.scott(a)linaro.org> Cc: Peter Hurley <peter(a)hurleysoftware.com> Cc: Russ Gorby <russ.gorby(a)intel.com> Cc: Sascha Hauer <s.hauer(a)pengutronix.de> Cc: Sebastian Reichel <sre(a)kernel.org> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/tty/n_gsm.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-) --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -1467,6 +1467,10 @@ static void gsm_dlci_open(struct gsm_dlc * in which case an opening port goes back to closed and a closing port * is simply put into closed state (any further frames from the other * end will get a DM response) + * + * Some control dlci can stay in ADM mode with other dlci working just + * fine. In that case we can just keep the control dlci open after the + * DLCI_OPENING retries time out. */ static void gsm_dlci_t1(unsigned long data) @@ -1480,8 +1484,15 @@ static void gsm_dlci_t1(unsigned long da if (dlci->retries) { gsm_command(dlci->gsm, dlci->addr, SABM|PF); mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100); - } else + } else if (!dlci->addr && gsm->control == (DM | PF)) { + if (debug & 8) + pr_info("DLCI %d opening in ADM mode.\n", + dlci->addr); + gsm_dlci_open(dlci); + } else { gsm_dlci_close(dlci); + } + break; case DLCI_CLOSING: dlci->retries--; @@ -1499,8 +1510,8 @@ static void gsm_dlci_t1(unsigned long da * @dlci: DLCI to open * * Commence opening a DLCI from the Linux side. We issue SABM messages - * to the modem which should then reply with a UA, at which point we - * will move into open state. Opening is done asynchronously with retry + * to the modem which should then reply with a UA or ADM, at which point + * we will move into open state. Opening is done asynchronously with retry * running off timers and the responses. */ Patches currently in stable-queue which might be from tony(a)atomide.com are queue-4.9/tty-n_gsm-allow-adm-response-in-addition-to-ua-for-control-dlci.patch

6 years, 9 months

1
0
0 0

Patch "ubi: fastmap: Fix slab corruption" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ubi: fastmap: Fix slab corruption to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ubi-fastmap-fix-slab-corruption.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Rabin Vincent <rabinv(a)axis.com> Date: Mon, 3 Apr 2017 13:44:11 +0200 Subject: ubi: fastmap: Fix slab corruption From: Rabin Vincent <rabinv(a)axis.com> [ Upstream commit 8a1435880f452430b41374d27ac4a33e7bd381ea ] Booting with UBI fastmap and SLUB debugging enabled results in the following splats. The problem is that ubi_scan_fastmap() moves the fastmap blocks from the scan_ai (allocated in scan_fast()) to the ai allocated in ubi_attach(). This results in two problems: - When the scan_ai is freed, aebs which were allocated from its slab cache are still in use. - When the other ai is being destroyed in destroy_ai(), the arguments to kmem_cache_free() call are incorrect since aebs on its ->fastmap list were allocated with a slab cache from a differnt ai. Fix this by making a copy of the aebs in ubi_scan_fastmap() instead of moving them. ============================================================================= BUG ubi_aeb_slab_cache (Not tainted): Objects remaining in ubi_aeb_slab_cache on __kmem_cache_shutdown() ----------------------------------------------------------------------------- INFO: Slab 0xbfd2da3c objects=17 used=1 fp=0xb33d7748 flags=0x40000080 CPU: 1 PID: 118 Comm: ubiattach Tainted: G B 4.9.15 #3 [<80111910>] (unwind_backtrace) from [<8010d498>] (show_stack+0x18/0x1c) [<8010d498>] (show_stack) from [<804a3274>] (dump_stack+0xb4/0xe0) [<804a3274>] (dump_stack) from [<8026c47c>] (slab_err+0x78/0x88) [<8026c47c>] (slab_err) from [<802735bc>] (__kmem_cache_shutdown+0x180/0x3e0) [<802735bc>] (__kmem_cache_shutdown) from [<8024e13c>] (shutdown_cache+0x1c/0x60) [<8024e13c>] (shutdown_cache) from [<8024ed64>] (kmem_cache_destroy+0x19c/0x20c) [<8024ed64>] (kmem_cache_destroy) from [<8057cc14>] (destroy_ai+0x1dc/0x1e8) [<8057cc14>] (destroy_ai) from [<8057f04c>] (ubi_attach+0x3f4/0x450) [<8057f04c>] (ubi_attach) from [<8056fe70>] (ubi_attach_mtd_dev+0x60c/0xff8) [<8056fe70>] (ubi_attach_mtd_dev) from [<80571d78>] (ctrl_cdev_ioctl+0x110/0x2b8) [<80571d78>] (ctrl_cdev_ioctl) from [<8029c77c>] (do_vfs_ioctl+0xac/0xa00) [<8029c77c>] (do_vfs_ioctl) from [<8029d10c>] (SyS_ioctl+0x3c/0x64) [<8029d10c>] (SyS_ioctl) from [<80108860>] (ret_fast_syscall+0x0/0x1c) INFO: Object 0xb33d7e88 @offset=3720 INFO: Allocated in scan_peb+0x608/0x81c age=72 cpu=1 pid=118 kmem_cache_alloc+0x3b0/0x43c scan_peb+0x608/0x81c ubi_attach+0x124/0x450 ubi_attach_mtd_dev+0x60c/0xff8 ctrl_cdev_ioctl+0x110/0x2b8 do_vfs_ioctl+0xac/0xa00 SyS_ioctl+0x3c/0x64 ret_fast_syscall+0x0/0x1c kmem_cache_destroy ubi_aeb_slab_cache: Slab cache still has objects CPU: 1 PID: 118 Comm: ubiattach Tainted: G B 4.9.15 #3 [<80111910>] (unwind_backtrace) from [<8010d498>] (show_stack+0x18/0x1c) [<8010d498>] (show_stack) from [<804a3274>] (dump_stack+0xb4/0xe0) [<804a3274>] (dump_stack) from [<8024ed80>] (kmem_cache_destroy+0x1b8/0x20c) [<8024ed80>] (kmem_cache_destroy) from [<8057cc14>] (destroy_ai+0x1dc/0x1e8) [<8057cc14>] (destroy_ai) from [<8057f04c>] (ubi_attach+0x3f4/0x450) [<8057f04c>] (ubi_attach) from [<8056fe70>] (ubi_attach_mtd_dev+0x60c/0xff8) [<8056fe70>] (ubi_attach_mtd_dev) from [<80571d78>] (ctrl_cdev_ioctl+0x110/0x2b8) [<80571d78>] (ctrl_cdev_ioctl) from [<8029c77c>] (do_vfs_ioctl+0xac/0xa00) [<8029c77c>] (do_vfs_ioctl) from [<8029d10c>] (SyS_ioctl+0x3c/0x64) [<8029d10c>] (SyS_ioctl) from [<80108860>] (ret_fast_syscall+0x0/0x1c) cache_from_obj: Wrong slab cache. ubi_aeb_slab_cache but object is from ubi_aeb_slab_cache ------------[ cut here ]------------ WARNING: CPU: 1 PID: 118 at mm/slab.h:354 kmem_cache_free+0x39c/0x450 Modules linked in: CPU: 1 PID: 118 Comm: ubiattach Tainted: G B 4.9.15 #3 [<80111910>] (unwind_backtrace) from [<8010d498>] (show_stack+0x18/0x1c) [<8010d498>] (show_stack) from [<804a3274>] (dump_stack+0xb4/0xe0) [<804a3274>] (dump_stack) from [<80120e40>] (__warn+0xf4/0x10c) [<80120e40>] (__warn) from [<80120f20>] (warn_slowpath_null+0x28/0x30) [<80120f20>] (warn_slowpath_null) from [<80271fe0>] (kmem_cache_free+0x39c/0x450) [<80271fe0>] (kmem_cache_free) from [<8057cb88>] (destroy_ai+0x150/0x1e8) [<8057cb88>] (destroy_ai) from [<8057ef1c>] (ubi_attach+0x2c4/0x450) [<8057ef1c>] (ubi_attach) from [<8056fe70>] (ubi_attach_mtd_dev+0x60c/0xff8) [<8056fe70>] (ubi_attach_mtd_dev) from [<80571d78>] (ctrl_cdev_ioctl+0x110/0x2b8) [<80571d78>] (ctrl_cdev_ioctl) from [<8029c77c>] (do_vfs_ioctl+0xac/0xa00) [<8029c77c>] (do_vfs_ioctl) from [<8029d10c>] (SyS_ioctl+0x3c/0x64) [<8029d10c>] (SyS_ioctl) from [<80108860>] (ret_fast_syscall+0x0/0x1c) ---[ end trace 2bd8396277fd0a0b ]--- ============================================================================= BUG ubi_aeb_slab_cache (Tainted: G B W ): page slab pointer corrupt. ----------------------------------------------------------------------------- INFO: Allocated in scan_peb+0x608/0x81c age=104 cpu=1 pid=118 kmem_cache_alloc+0x3b0/0x43c scan_peb+0x608/0x81c ubi_attach+0x124/0x450 ubi_attach_mtd_dev+0x60c/0xff8 ctrl_cdev_ioctl+0x110/0x2b8 do_vfs_ioctl+0xac/0xa00 SyS_ioctl+0x3c/0x64 ret_fast_syscall+0x0/0x1c INFO: Slab 0xbfd2da3c objects=17 used=1 fp=0xb33d7748 flags=0x40000081 INFO: Object 0xb33d7e88 @offset=3720 fp=0xb33d7da0 Redzone b33d7e80: cc cc cc cc cc cc cc cc ........ Object b33d7e88: 02 00 00 00 01 00 00 00 00 f0 ff 7f ff ff ff ff ................ Object b33d7e98: 00 00 00 00 00 00 00 00 bd 16 00 00 00 00 00 00 ................ Object b33d7ea8: 00 01 00 00 00 02 00 00 00 00 00 00 00 00 00 00 ................ Redzone b33d7eb8: cc cc cc cc .... Padding b33d7f60: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ CPU: 1 PID: 118 Comm: ubiattach Tainted: G B W 4.9.15 #3 [<80111910>] (unwind_backtrace) from [<8010d498>] (show_stack+0x18/0x1c) [<8010d498>] (show_stack) from [<804a3274>] (dump_stack+0xb4/0xe0) [<804a3274>] (dump_stack) from [<80271770>] (free_debug_processing+0x320/0x3c4) [<80271770>] (free_debug_processing) from [<80271ad0>] (__slab_free+0x2bc/0x430) [<80271ad0>] (__slab_free) from [<80272024>] (kmem_cache_free+0x3e0/0x450) [<80272024>] (kmem_cache_free) from [<8057cb88>] (destroy_ai+0x150/0x1e8) [<8057cb88>] (destroy_ai) from [<8057ef1c>] (ubi_attach+0x2c4/0x450) [<8057ef1c>] (ubi_attach) from [<8056fe70>] (ubi_attach_mtd_dev+0x60c/0xff8) [<8056fe70>] (ubi_attach_mtd_dev) from [<80571d78>] (ctrl_cdev_ioctl+0x110/0x2b8) [<80571d78>] (ctrl_cdev_ioctl) from [<8029c77c>] (do_vfs_ioctl+0xac/0xa00) [<8029c77c>] (do_vfs_ioctl) from [<8029d10c>] (SyS_ioctl+0x3c/0x64) [<8029d10c>] (SyS_ioctl) from [<80108860>] (ret_fast_syscall+0x0/0x1c) FIX ubi_aeb_slab_cache: Object at 0xb33d7e88 not freed Signed-off-by: Rabin Vincent <rabinv(a)axis.com> Signed-off-by: Richard Weinberger <richard(a)nod.at> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/mtd/ubi/fastmap.c | 33 +++++++++++++++++++++++++++++---- 1 file changed, 29 insertions(+), 4 deletions(-) --- a/drivers/mtd/ubi/fastmap.c +++ b/drivers/mtd/ubi/fastmap.c @@ -828,6 +828,24 @@ static int find_fm_anchor(struct ubi_att return ret; } +static struct ubi_ainf_peb *clone_aeb(struct ubi_attach_info *ai, + struct ubi_ainf_peb *old) +{ + struct ubi_ainf_peb *new; + + new = ubi_alloc_aeb(ai, old->pnum, old->ec); + if (!new) + return NULL; + + new->vol_id = old->vol_id; + new->sqnum = old->sqnum; + new->lnum = old->lnum; + new->scrub = old->scrub; + new->copy_flag = old->copy_flag; + + return new; +} + /** * ubi_scan_fastmap - scan the fastmap. * @ubi: UBI device object @@ -847,7 +865,7 @@ int ubi_scan_fastmap(struct ubi_device * struct ubi_vid_hdr *vh; struct ubi_ec_hdr *ech; struct ubi_fastmap_layout *fm; - struct ubi_ainf_peb *tmp_aeb, *aeb; + struct ubi_ainf_peb *aeb; int i, used_blocks, pnum, fm_anchor, ret = 0; size_t fm_size; __be32 crc, tmp_crc; @@ -857,9 +875,16 @@ int ubi_scan_fastmap(struct ubi_device * if (fm_anchor < 0) return UBI_NO_FASTMAP; - /* Move all (possible) fastmap blocks into our new attach structure. */ - list_for_each_entry_safe(aeb, tmp_aeb, &scan_ai->fastmap, u.list) - list_move_tail(&aeb->u.list, &ai->fastmap); + /* Copy all (possible) fastmap blocks into our new attach structure. */ + list_for_each_entry(aeb, &scan_ai->fastmap, u.list) { + struct ubi_ainf_peb *new; + + new = clone_aeb(ai, aeb); + if (!new) + return -ENOMEM; + + list_add(&new->u.list, &ai->fastmap); + } down_write(&ubi->fm_protect); memset(ubi->fm_buf, 0, ubi->fm_size); Patches currently in stable-queue which might be from rabinv(a)axis.com are queue-4.9/ubi-fastmap-fix-slab-corruption.patch queue-4.9/cifs-silence-lockdep-splat-in-cifs_relock_file.patch

6 years, 9 months

1
0
0 0

Patch "thermal: power_allocator: fix one race condition issue for thermal_instances list" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled thermal: power_allocator: fix one race condition issue for thermal_instances list to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: thermal-power_allocator-fix-one-race-condition-issue-for-thermal_instances-list.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Yi Zeng <yizeng(a)asrmicro.com> Date: Tue, 26 Dec 2017 19:22:26 +0800 Subject: thermal: power_allocator: fix one race condition issue for thermal_instances list From: Yi Zeng <yizeng(a)asrmicro.com> [ Upstream commit a5de11d67dcd268b8d0beb73dc374de5e97f0caf ] When invoking allow_maximum_power and traverse tz->thermal_instances, we should grab thermal_zone_device->lock to avoid race condition. For example, during the system reboot, if the mali GPU device implements device shutdown callback and unregister GPU devfreq cooling device, the deleted list head may be accessed to cause panic, as the following log shows: [ 33.551070] c3 25 (kworker/3:0) Unable to handle kernel paging request at virtual address dead000000000070 [ 33.566708] c3 25 (kworker/3:0) pgd = ffffffc0ed290000 [ 33.572071] c3 25 (kworker/3:0) [dead000000000070] *pgd=00000001ed292003, *pud=00000001ed292003, *pmd=0000000000000000 [ 33.581515] c3 25 (kworker/3:0) Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 33.599761] c3 25 (kworker/3:0) CPU: 3 PID: 25 Comm: kworker/3:0 Not tainted 4.4.35+ #912 [ 33.614137] c3 25 (kworker/3:0) Workqueue: events_freezable thermal_zone_device_check [ 33.620245] c3 25 (kworker/3:0) task: ffffffc0f32e4200 ti: ffffffc0f32f0000 task.ti: ffffffc0f32f0000 [ 33.629466] c3 25 (kworker/3:0) PC is at power_allocator_throttle+0x7c8/0x8a4 [ 33.636609] c3 25 (kworker/3:0) LR is at power_allocator_throttle+0x808/0x8a4 [ 33.643742] c3 25 (kworker/3:0) pc : [<ffffff8008683dd0>] lr : [<ffffff8008683e10>] pstate: 20000145 [ 33.652874] c3 25 (kworker/3:0) sp : ffffffc0f32f3bb0 [ 34.468519] c3 25 (kworker/3:0) Process kworker/3:0 (pid: 25, stack limit = 0xffffffc0f32f0020) [ 34.477220] c3 25 (kworker/3:0) Stack: (0xffffffc0f32f3bb0 to 0xffffffc0f32f4000) [ 34.819822] c3 25 (kworker/3:0) Call trace: [ 34.824021] c3 25 (kworker/3:0) Exception stack(0xffffffc0f32f39c0 to 0xffffffc0f32f3af0) [ 34.924993] c3 25 (kworker/3:0) [<ffffff8008683dd0>] power_allocator_throttle+0x7c8/0x8a4 [ 34.933184] c3 25 (kworker/3:0) [<ffffff80086807f4>] handle_thermal_trip.part.25+0x70/0x224 [ 34.941545] c3 25 (kworker/3:0) [<ffffff8008680a68>] thermal_zone_device_update+0xc0/0x20c [ 34.949818] c3 25 (kworker/3:0) [<ffffff8008680bd4>] thermal_zone_device_check+0x20/0x2c [ 34.957924] c3 25 (kworker/3:0) [<ffffff80080b93a4>] process_one_work+0x168/0x458 [ 34.965414] c3 25 (kworker/3:0) [<ffffff80080ba068>] worker_thread+0x13c/0x4b4 [ 34.972650] c3 25 (kworker/3:0) [<ffffff80080c0a4c>] kthread+0xe8/0xfc [ 34.979187] c3 25 (kworker/3:0) [<ffffff8008084e90>] ret_from_fork+0x10/0x40 [ 34.986244] c3 25 (kworker/3:0) Code: f9405e73 eb1302bf d102e273 54ffc460 (b9402a61) [ 34.994339] c3 25 (kworker/3:0) ---[ end trace 32057901e3b7e1db ]--- Signed-off-by: Yi Zeng <yizeng(a)asrmicro.com> Signed-off-by: Zhang Rui <rui.zhang(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/thermal/power_allocator.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/thermal/power_allocator.c +++ b/drivers/thermal/power_allocator.c @@ -523,6 +523,7 @@ static void allow_maximum_power(struct t struct thermal_instance *instance; struct power_allocator_params *params = tz->governor_data; + mutex_lock(&tz->lock); list_for_each_entry(instance, &tz->thermal_instances, tz_node) { if ((instance->trip != params->trip_max_desired_temperature) || (!cdev_is_power_actor(instance->cdev))) @@ -534,6 +535,7 @@ static void allow_maximum_power(struct t mutex_unlock(&instance->cdev->lock); thermal_cdev_update(instance->cdev); } + mutex_unlock(&tz->lock); } /** Patches currently in stable-queue which might be from yizeng(a)asrmicro.com are queue-4.9/thermal-power_allocator-fix-one-race-condition-issue-for-thermal_instances-list.patch

6 years, 9 months

1
0
0 0

Patch "tcp: better validation of received ack sequences" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled tcp: better validation of received ack sequences to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: tcp-better-validation-of-received-ack-sequences.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Mon Apr 9 17:09:24 CEST 2018 From: Eric Dumazet <edumazet(a)google.com> Date: Tue, 23 May 2017 15:24:46 -0700 Subject: tcp: better validation of received ack sequences From: Eric Dumazet <edumazet(a)google.com> [ Upstream commit d0e1a1b5a833b625c93d3d49847609350ebd79db ] Paul Fiterau Brostean reported : <quote> Linux TCP stack we analyze exhibits behavior that seems odd to me. The scenario is as follows (all packets have empty payloads, no window scaling, rcv/snd window size should not be a factor): TEST HARNESS (CLIENT) LINUX SERVER 1. - LISTEN (server listen, then accepts) 2. - --> <SEQ=100><CTL=SYN> --> SYN-RECEIVED 3. - <-- <SEQ=300><ACK=101><CTL=SYN,ACK> <-- SYN-RECEIVED 4. - --> <SEQ=101><ACK=301><CTL=ACK> --> ESTABLISHED 5. - <-- <SEQ=301><ACK=101><CTL=FIN,ACK> <-- FIN WAIT-1 (server opts to close the data connection calling "close" on the connection socket) 6. - --> <SEQ=101><ACK=99999><CTL=FIN,ACK> --> CLOSING (client sends FIN,ACK with not yet sent acknowledgement number) 7. - <-- <SEQ=302><ACK=102><CTL=ACK> <-- CLOSING (ACK is 102 instead of 101, why?) ... (silence from CLIENT) 8. - <-- <SEQ=301><ACK=102><CTL=FIN,ACK> <-- CLOSING (retransmission, again ACK is 102) Now, note that packet 6 while having the expected sequence number, acknowledges something that wasn't sent by the server. So I would expect the packet to maybe prompt an ACK response from the server, and then be ignored. Yet it is not ignored and actually leads to an increase of the acknowledgement number in the server's retransmission of the FIN,ACK packet. The explanation I found is that the FIN in packet 6 was processed, despite the acknowledgement number being unacceptable. Further experiments indeed show that the server processes this FIN, transitioning to CLOSING, then on receiving an ACK for the FIN it had send in packet 5, the server (or better said connection) transitions from CLOSING to TIME_WAIT (as signaled by netstat). </quote> Indeed, tcp_rcv_state_process() calls tcp_ack() but does not exploit the @acceptable status but for TCP_SYN_RECV state. What we want here is to send a challenge ACK, if not in TCP_SYN_RECV state. TCP_FIN_WAIT1 state is not the only state we should fix. Add a FLAG_NO_CHALLENGE_ACK so that tcp_rcv_state_process() can choose to send a challenge ACK and discard the packet instead of wrongly change socket state. With help from Neal Cardwell. Signed-off-by: Eric Dumazet <edumazet(a)google.com> Reported-by: Paul Fiterau Brostean <p.fiterau-brostean(a)science.ru.nl> Cc: Neal Cardwell <ncardwell(a)google.com> Cc: Yuchung Cheng <ycheng(a)google.com> Cc: Soheil Hassas Yeganeh <soheil(a)google.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv4/tcp_input.c | 24 +++++++++++------------- 1 file changed, 11 insertions(+), 13 deletions(-) --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -115,6 +115,7 @@ int sysctl_tcp_invalid_ratelimit __read_ #define FLAG_DSACKING_ACK 0x800 /* SACK blocks contained D-SACK info */ #define FLAG_SACK_RENEGING 0x2000 /* snd_una advanced to a sacked seq */ #define FLAG_UPDATE_TS_RECENT 0x4000 /* tcp_replace_ts_recent() */ +#define FLAG_NO_CHALLENGE_ACK 0x8000 /* do not call tcp_send_challenge_ack() */ #define FLAG_ACKED (FLAG_DATA_ACKED|FLAG_SYN_ACKED) #define FLAG_NOT_DUP (FLAG_DATA|FLAG_WIN_UPDATE|FLAG_ACKED) @@ -3618,7 +3619,8 @@ static int tcp_ack(struct sock *sk, cons if (before(ack, prior_snd_una)) { /* RFC 5961 5.2 [Blind Data Injection Attack].[Mitigation] */ if (before(ack, prior_snd_una - tp->max_window)) { - tcp_send_challenge_ack(sk, skb); + if (!(flag & FLAG_NO_CHALLENGE_ACK)) + tcp_send_challenge_ack(sk, skb); return -1; } goto old_ack; @@ -5969,13 +5971,17 @@ int tcp_rcv_state_process(struct sock *s /* step 5: check the ACK field */ acceptable = tcp_ack(sk, skb, FLAG_SLOWPATH | - FLAG_UPDATE_TS_RECENT) > 0; + FLAG_UPDATE_TS_RECENT | + FLAG_NO_CHALLENGE_ACK) > 0; + if (!acceptable) { + if (sk->sk_state == TCP_SYN_RECV) + return 1; /* send one RST */ + tcp_send_challenge_ack(sk, skb); + goto discard; + } switch (sk->sk_state) { case TCP_SYN_RECV: - if (!acceptable) - return 1; - if (!tp->srtt_us) tcp_synack_rtt_meas(sk, req); @@ -6045,14 +6051,6 @@ int tcp_rcv_state_process(struct sock *s * our SYNACK so stop the SYNACK timer. */ if (req) { - /* Return RST if ack_seq is invalid. - * Note that RFC793 only says to generate a - * DUPACK for it but for TCP Fast Open it seems - * better to treat this case like TCP_SYN_RECV - * above. - */ - if (!acceptable) - return 1; /* We no longer need the request sock. */ reqsk_fastopen_remove(sk, req, false); tcp_rearm_rto(sk); Patches currently in stable-queue which might be from edumazet(a)google.com are queue-4.9/tcp-better-validation-of-received-ack-sequences.patch queue-4.9/x86-asm-don-t-use-rbp-as-a-temporary-register-in-csum_partial_copy_generic.patch queue-4.9/skbuff-only-inherit-relevant-tx_flags.patch

6 years, 9 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror April 2018