March 2018 - Linux-stable-mirror

Patch "media: [RESEND] media: dvb-frontends: Add delay to Si2168 restart" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled media: [RESEND] media: dvb-frontends: Add delay to Si2168 restart to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: media-media-dvb-frontends-add-delay-to-si2168-restart.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 15:16:04 CET 2018 From: Ron Economos <w6rz(a)comcast.net> Date: Mon, 11 Dec 2017 19:51:53 -0500 Subject: media: [RESEND] media: dvb-frontends: Add delay to Si2168 restart From: Ron Economos <w6rz(a)comcast.net> [ Upstream commit 380a6c86457573aa42d27ae11e025eb25941a0b7 ] On faster CPUs a delay is required after the resume command and the restart command. Without the delay, the restart command often returns -EREMOTEIO and the Si2168 does not restart. Note that this patch fixes the same issue as https://patchwork.linuxtv.org/patch/44304/, but I believe my udelay() fix addresses the actual problem. Signed-off-by: Ron Economos <w6rz(a)comcast.net> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/dvb-frontends/si2168.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/media/dvb-frontends/si2168.c +++ b/drivers/media/dvb-frontends/si2168.c @@ -14,6 +14,8 @@ * GNU General Public License for more details. */ +#include <linux/delay.h> + #include "si2168_priv.h" static const struct dvb_frontend_ops si2168_ops; @@ -380,6 +382,7 @@ static int si2168_init(struct dvb_fronte if (ret) goto err; + udelay(100); memcpy(cmd.args, "\x85", 1); cmd.wlen = 1; cmd.rlen = 1; Patches currently in stable-queue which might be from w6rz(a)comcast.net are queue-3.18/media-media-dvb-frontends-add-delay-to-si2168-restart.patch

6 years, 9 months

1
0
0 0

Patch "mfd: palmas: Reset the POWERHOLD mux during power off" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mfd: palmas: Reset the POWERHOLD mux during power off to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mfd-palmas-reset-the-powerhold-mux-during-power-off.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 15:16:04 CET 2018 From: Keerthy <j-keerthy(a)ti.com> Date: Thu, 10 Nov 2016 10:39:18 +0530 Subject: mfd: palmas: Reset the POWERHOLD mux during power off From: Keerthy <j-keerthy(a)ti.com> [ Upstream commit 85fdaf8eb9bbec1f0f8a52fd5d85659d60738816 ] POWERHOLD signal has higher priority over the DEV_ON bit. So power off will not happen if the POWERHOLD is held high. Hence reset the MUX to GPIO_7 mode to release the POWERHOLD and the DEV_ON bit to take effect to power off the PMIC. PMIC Power off happens in dire situations like thermal shutdown so irrespective of the POWERHOLD setting go ahead and turn off the powerhold. Currently poweroff is broken on boards that have powerhold enabled. This fixes poweroff on those boards. Signed-off-by: Keerthy <j-keerthy(a)ti.com> Signed-off-by: Lee Jones <lee.jones(a)linaro.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/mfd/palmas.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) --- a/drivers/mfd/palmas.c +++ b/drivers/mfd/palmas.c @@ -430,6 +430,20 @@ static void palmas_power_off(void) { unsigned int addr; int ret, slave; + struct device_node *np = palmas_dev->dev->of_node; + + if (of_property_read_bool(np, "ti,palmas-override-powerhold")) { + addr = PALMAS_BASE_TO_REG(PALMAS_PU_PD_OD_BASE, + PALMAS_PRIMARY_SECONDARY_PAD2); + slave = PALMAS_BASE_TO_SLAVE(PALMAS_PU_PD_OD_BASE); + + ret = regmap_update_bits(palmas_dev->regmap[slave], addr, + PALMAS_PRIMARY_SECONDARY_PAD2_GPIO_7_MASK, 0); + if (ret) + dev_err(palmas_dev->dev, + "Unable to write PRIMARY_SECONDARY_PAD2 %d\n", + ret); + } if (!palmas_dev) return; Patches currently in stable-queue which might be from j-keerthy(a)ti.com are queue-3.18/mfd-palmas-reset-the-powerhold-mux-during-power-off.patch

6 years, 9 months

1
0
0 0

Patch "[media] media/dvb-core: Race condition when writing to CAM" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled [media] media/dvb-core: Race condition when writing to CAM to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: media-dvb-core-race-condition-when-writing-to-cam.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 15:16:04 CET 2018 From: Jasmin J <jasmin(a)anw.at> Date: Fri, 17 Mar 2017 23:04:20 -0300 Subject: [media] media/dvb-core: Race condition when writing to CAM From: Jasmin J <jasmin(a)anw.at> [ Upstream commit e7080d4471d805d921a9ea21b32f911a91e248cb ] It started with a sporadic message in syslog: "CAM tried to send a buffer larger than the ecount size" This message is not the fault itself, but a consecutive fault, after a read error from the CAM. This happens only on several CAMs, several hardware, and of course sporadic. It is a consecutive fault, if the last read from the CAM did fail. I guess this will not happen on all CAMs, but at least it did on mine. There was a write error to the CAM and during the re-initialization procedure, the CAM finished the last read, although it got a RS. The write error to the CAM happened because a race condition between HC write, checking DA and FR. This patch added an additional check for DA(RE), just after checking FR. It is important to read the CAMs status register again, to give the CAM the necessary time for a proper reaction to HC. Please note the description within the source code (patch below). [mchehab(a)s-opensource.com: make checkpatch happy] Signed-off-by: Jasmin jessich <jasmin(a)anw.at> Tested-by: Ralph Metzler <rjkm(a)metzlerbros.de> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/dvb-core/dvb_ca_en50221.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) --- a/drivers/media/dvb-core/dvb_ca_en50221.c +++ b/drivers/media/dvb-core/dvb_ca_en50221.c @@ -749,6 +749,29 @@ static int dvb_ca_en50221_write_data(str goto exit; } + /* + * It may need some time for the CAM to settle down, or there might + * be a race condition between the CAM, writing HC and our last + * check for DA. This happens, if the CAM asserts DA, just after + * checking DA before we are setting HC. In this case it might be + * a bug in the CAM to keep the FR bit, the lower layer/HW + * communication requires a longer timeout or the CAM needs more + * time internally. But this happens in reality! + * We need to read the status from the HW again and do the same + * we did for the previous check for DA + */ + status = ca->pub->read_cam_control(ca->pub, slot, CTRLIF_STATUS); + if (status < 0) + goto exit; + + if (status & (STATUSREG_DA | STATUSREG_RE)) { + if (status & STATUSREG_DA) + dvb_ca_en50221_thread_wakeup(ca); + + status = -EAGAIN; + goto exit; + } + /* send the amount of data */ if ((status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_SIZE_HIGH, bytes_write >> 8)) != 0) goto exit; Patches currently in stable-queue which might be from jasmin(a)anw.at are queue-3.18/media-dvb-core-race-condition-when-writing-to-cam.patch

6 years, 9 months

1
0
0 0

Patch "md/raid10: skip spare disk as 'first' disk" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled md/raid10: skip spare disk as 'first' disk to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: md-raid10-skip-spare-disk-as-first-disk.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 15:16:04 CET 2018 From: Shaohua Li <shli(a)fb.com> Date: Mon, 1 May 2017 12:15:07 -0700 Subject: md/raid10: skip spare disk as 'first' disk From: Shaohua Li <shli(a)fb.com> [ Upstream commit b506335e5d2b4ec687dde392a3bdbf7601778f1d ] Commit 6f287ca(md/raid10: reset the 'first' at the end of loop) ignores a case in reshape, the first rdev could be a spare disk, which shouldn't be accounted as the first disk since it doesn't include the offset info. Fix: 6f287ca(md/raid10: reset the 'first' at the end of loop) Cc: Guoqing Jiang <gqjiang(a)suse.com> Cc: NeilBrown <neilb(a)suse.com> Signed-off-by: Shaohua Li <shli(a)fb.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/md/raid10.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -4132,6 +4132,7 @@ static int raid10_start_reshape(struct m diff = 0; if (first || diff < min_offset_diff) min_offset_diff = diff; + first = 0; } } Patches currently in stable-queue which might be from shli(a)fb.com are queue-3.18/md-raid10-skip-spare-disk-as-first-disk.patch

6 years, 9 months

1
0
0 0

Patch "media: bt8xx: Fix err 'bt878_probe()'" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled media: bt8xx: Fix err 'bt878_probe()' to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: media-bt8xx-fix-err-bt878_probe.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 15:16:04 CET 2018 From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Date: Thu, 21 Sep 2017 19:23:56 -0400 Subject: media: bt8xx: Fix err 'bt878_probe()' From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> [ Upstream commit 45392ff6881dbe56d41ef0b17c2e576065f8ffa1 ] This is odd to call 'pci_disable_device()' in an error path before a coresponding successful 'pci_enable_device()'. Return directly instead. Fixes: 77e0be12100a ("V4L/DVB (4176): Bug-fix: Fix memory overflow") Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab(a)s-opensource.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/media/pci/bt8xx/bt878.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) --- a/drivers/media/pci/bt8xx/bt878.c +++ b/drivers/media/pci/bt8xx/bt878.c @@ -425,8 +425,7 @@ static int bt878_probe(struct pci_dev *d bt878_num); if (bt878_num >= BT878_MAX) { printk(KERN_ERR "bt878: Too many devices inserted\n"); - result = -ENOMEM; - goto fail0; + return -ENOMEM; } if (pci_enable_device(dev)) return -EIO; Patches currently in stable-queue which might be from christophe.jaillet(a)wanadoo.fr are queue-3.18/media-bt8xx-fix-err-bt878_probe.patch

6 years, 9 months

1
0
0 0

Patch "mac80211: don't parse encrypted management frames in ieee80211_frame_acked" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mac80211: don't parse encrypted management frames in ieee80211_frame_acked to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mac80211-don-t-parse-encrypted-management-frames-in-ieee80211_frame_acked.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 15:16:04 CET 2018 From: Emmanuel Grumbach <emmanuel.grumbach(a)intel.com> Date: Wed, 26 Apr 2017 10:58:51 +0300 Subject: mac80211: don't parse encrypted management frames in ieee80211_frame_acked From: Emmanuel Grumbach <emmanuel.grumbach(a)intel.com> [ Upstream commit cf147085fdda044622973a12e4e06f1c753ab677 ] ieee80211_frame_acked is called when a frame is acked by the peer. In case this is a management frame, we check if this an SMPS frame, in which case we can update our antenna configuration. When we parse the management frame we look at the category in case it is an action frame. That byte sits after the IV in case the frame was encrypted. This means that if the frame was encrypted, we basically look at the IV instead of looking at the category. It is then theorically possible that we think that an SMPS action frame was acked where really we had another frame that was encrypted. Since the only management frame whose ack needs to be tracked is the SMPS action frame, and that frame is not a robust management frame, it will never be encrypted. The easiest way to fix this problem is then to not look at frames that were encrypted. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach(a)intel.com> Signed-off-by: Luca Coelho <luciano.coelho(a)intel.com> Signed-off-by: Johannes Berg <johannes.berg(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/mac80211/status.c | 1 + 1 file changed, 1 insertion(+) --- a/net/mac80211/status.c +++ b/net/mac80211/status.c @@ -194,6 +194,7 @@ static void ieee80211_frame_acked(struct } if (ieee80211_is_action(mgmt->frame_control) && + !ieee80211_has_protected(mgmt->frame_control) && mgmt->u.action.category == WLAN_CATEGORY_HT && mgmt->u.action.u.ht_smps.action == WLAN_HT_ACTION_SMPS && ieee80211_sdata_running(sdata)) { Patches currently in stable-queue which might be from emmanuel.grumbach(a)intel.com are queue-3.18/mac80211-don-t-parse-encrypted-management-frames-in-ieee80211_frame_acked.patch

6 years, 9 months

1
0
0 0

Patch "KVM: PPC: Book3S PR: Exit KVM on failed mapping" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled KVM: PPC: Book3S PR: Exit KVM on failed mapping to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: kvm-ppc-book3s-pr-exit-kvm-on-failed-mapping.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 15:16:04 CET 2018 From: Alexey Kardashevskiy <aik(a)ozlabs.ru> Date: Fri, 24 Mar 2017 17:48:10 +1100 Subject: KVM: PPC: Book3S PR: Exit KVM on failed mapping From: Alexey Kardashevskiy <aik(a)ozlabs.ru> [ Upstream commit bd9166ffe624000140fc6b606b256df01fc0d060 ] At the moment kvmppc_mmu_map_page() returns -1 if mmu_hash_ops.hpte_insert() fails for any reason so the page fault handler resumes the guest and it faults on the same address again. This adds distinction to kvmppc_mmu_map_page() to return -EIO if mmu_hash_ops.hpte_insert() failed for a reason other than full pteg. At the moment only pSeries_lpar_hpte_insert() returns -2 if plpar_pte_enter() failed with a code other than H_PTEG_FULL. Other mmu_hash_ops.hpte_insert() instances can only fail with -1 "full pteg". With this change, if PR KVM fails to update HPT, it can signal the userspace about this instead of returning to guest and having the very same page fault over and over again. Signed-off-by: Alexey Kardashevskiy <aik(a)ozlabs.ru> Reviewed-by: David Gibson <david(a)gibson.dropbear.id.au> Signed-off-by: Paul Mackerras <paulus(a)ozlabs.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/powerpc/kvm/book3s_64_mmu_host.c | 5 ++++- arch/powerpc/kvm/book3s_pr.c | 6 +++++- 2 files changed, 9 insertions(+), 2 deletions(-) --- a/arch/powerpc/kvm/book3s_64_mmu_host.c +++ b/arch/powerpc/kvm/book3s_64_mmu_host.c @@ -176,12 +176,15 @@ map_again: ret = ppc_md.hpte_insert(hpteg, vpn, hpaddr, rflags, vflags, hpsize, hpsize, MMU_SEGSIZE_256M); - if (ret < 0) { + if (ret == -1) { /* If we couldn't map a primary PTE, try a secondary */ hash = ~hash; vflags ^= HPTE_V_SECONDARY; attempt++; goto map_again; + } else if (ret < 0) { + r = -EIO; + goto out_unlock; } else { trace_kvm_book3s_64_mmu_map(rflags, hpteg, vpn, hpaddr, orig_pte); --- a/arch/powerpc/kvm/book3s_pr.c +++ b/arch/powerpc/kvm/book3s_pr.c @@ -625,7 +625,11 @@ int kvmppc_handle_pagefault(struct kvm_r kvmppc_mmu_unmap_page(vcpu, &pte); } /* The guest's PTE is not mapped yet. Map on the host */ - kvmppc_mmu_map_page(vcpu, &pte, iswrite); + if (kvmppc_mmu_map_page(vcpu, &pte, iswrite) == -EIO) { + /* Exit KVM if mapping failed */ + run->exit_reason = KVM_EXIT_INTERNAL_ERROR; + return RESUME_HOST; + } if (data) vcpu->stat.sp_storage++; else if (vcpu->arch.mmu.is_dcbz32(vcpu) && Patches currently in stable-queue which might be from aik(a)ozlabs.ru are queue-3.18/kvm-ppc-book3s-pr-exit-kvm-on-failed-mapping.patch

6 years, 9 months

1
0
0 0

Patch "ipmi/watchdog: fix wdog hang on panic waiting for ipmi response" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ipmi/watchdog: fix wdog hang on panic waiting for ipmi response to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ipmi-watchdog-fix-wdog-hang-on-panic-waiting-for-ipmi-response.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 15:16:04 CET 2018 From: Robert Lippert <roblip(a)gmail.com> Date: Thu, 20 Apr 2017 16:49:47 -0700 Subject: ipmi/watchdog: fix wdog hang on panic waiting for ipmi response From: Robert Lippert <roblip(a)gmail.com> [ Upstream commit 2c1175c2e8e5487233cabde358a19577562ac83e ] Commit c49c097610fe ("ipmi: Don't call receive handler in the panic context") means that the panic_recv_free is not called during a panic and the atomic count does not drop to 0. Fix this by only expecting one decrement of the atomic variable which comes from panic_smi_free. Signed-off-by: Robert Lippert <rlippert(a)google.com> Signed-off-by: Corey Minyard <cminyard(a)mvista.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/char/ipmi/ipmi_watchdog.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) --- a/drivers/char/ipmi/ipmi_watchdog.c +++ b/drivers/char/ipmi/ipmi_watchdog.c @@ -509,7 +509,7 @@ static void panic_halt_ipmi_heartbeat(vo msg.cmd = IPMI_WDOG_RESET_TIMER; msg.data = NULL; msg.data_len = 0; - atomic_add(2, &panic_done_count); + atomic_add(1, &panic_done_count); rv = ipmi_request_supply_msgs(watchdog_user, (struct ipmi_addr *) &addr, 0, @@ -519,7 +519,7 @@ static void panic_halt_ipmi_heartbeat(vo &panic_halt_heartbeat_recv_msg, 1); if (rv) - atomic_sub(2, &panic_done_count); + atomic_sub(1, &panic_done_count); } static struct ipmi_smi_msg panic_halt_smi_msg = { @@ -543,12 +543,12 @@ static void panic_halt_ipmi_set_timeout( /* Wait for the messages to be free. */ while (atomic_read(&panic_done_count) != 0) ipmi_poll_interface(watchdog_user); - atomic_add(2, &panic_done_count); + atomic_add(1, &panic_done_count); rv = i_ipmi_set_timeout(&panic_halt_smi_msg, &panic_halt_recv_msg, &send_heartbeat_now); if (rv) { - atomic_sub(2, &panic_done_count); + atomic_sub(1, &panic_done_count); printk(KERN_WARNING PFX "Unable to extend the watchdog timeout."); } else { Patches currently in stable-queue which might be from roblip(a)gmail.com are queue-3.18/ipmi-watchdog-fix-wdog-hang-on-panic-waiting-for-ipmi-response.patch

6 years, 9 months

1
0
0 0

Patch "Input: ar1021_i2c - fix too long name in driver's device table" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Input: ar1021_i2c - fix too long name in driver's device table to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: input-ar1021_i2c-fix-too-long-name-in-driver-s-device-table.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 15:16:04 CET 2018 From: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Date: Mon, 12 Dec 2016 15:32:57 -0800 Subject: Input: ar1021_i2c - fix too long name in driver's device table From: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> [ Upstream commit 95123fc43560d6f4a60e74f72836e63cd8848f76 ] The name field in structure i2c_device_id is 20 characters, and we expect it to be NULL-terminated, however we are trying to stuff it with 21 bytes and thus NULL-terminator is lost. This causes issues when one creates device with name "MICROCHIP_AR1021_I2C" as i2c core cuts off the last "C", and automatic module loading by alias does not work as result. The -I2C suffix in the device name is superfluous, we know what bus we are dealing with, so let's drop it. Also, no other driver uses capitals, and the manufacturer name is normally not included, except in very rare cases of incompatible name collisions. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=116211 Fixes: dd4cae8bf166 ("Input: Add Microchip AR1021 i2c touchscreen") Reviewed-By: Christian Gmeiner <christian.gmeiner(a)gmail.com> Tested-by: Martin Kepplinger <martin.kepplinger(a)ginzinger.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/input/touchscreen/ar1021_i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/input/touchscreen/ar1021_i2c.c +++ b/drivers/input/touchscreen/ar1021_i2c.c @@ -152,7 +152,7 @@ static int __maybe_unused ar1021_i2c_res static SIMPLE_DEV_PM_OPS(ar1021_i2c_pm, ar1021_i2c_suspend, ar1021_i2c_resume); static const struct i2c_device_id ar1021_i2c_id[] = { - { "MICROCHIP_AR1021_I2C", 0 }, + { "ar1021", 0 }, { }, }; MODULE_DEVICE_TABLE(i2c, ar1021_i2c_id); Patches currently in stable-queue which might be from dmitry.torokhov(a)gmail.com are queue-3.18/input-ar1021_i2c-fix-too-long-name-in-driver-s-device-table.patch

6 years, 9 months

1
0
0 0

Patch "IB/ipoib: Update broadcast object if PKey value was changed in index 0" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled IB/ipoib: Update broadcast object if PKey value was changed in index 0 to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ib-ipoib-update-broadcast-object-if-pkey-value-was-changed-in-index-0.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 15:16:04 CET 2018 From: Feras Daoud <ferasda(a)mellanox.com> Date: Sun, 19 Mar 2017 11:18:54 +0200 Subject: IB/ipoib: Update broadcast object if PKey value was changed in index 0 From: Feras Daoud <ferasda(a)mellanox.com> [ Upstream commit 9a9b8112699d78e7f317019b37f377e90023f3ed ] Update the broadcast address in the priv->broadcast object when the Pkey value changes in index 0, otherwise the multicast GID value will keep the previous value of the PKey, and will not be updated. This leads to interface state down because the interface will keep the old PKey value. For example, in SR-IOV environment, if the PF changes the value of PKey index 0 for one of the VFs, then the VF receives PKey change event that triggers heavy flush. This flush calls update_parent_pkey that update the broadcast object and its relevant members. If in this case the multicast GID will not be updated, the interface state will be down. Fixes: c2904141696e ("IPoIB: Fix pkey change flow for virtualization environments") Signed-off-by: Feras Daoud <ferasda(a)mellanox.com> Signed-off-by: Erez Shitrit <erezsh(a)mellanox.com> Reviewed-by: Alex Vesker <valex(a)mellanox.com> Signed-off-by: Leon Romanovsky <leon(a)kernel.org> Signed-off-by: Doug Ledford <dledford(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/infiniband/ulp/ipoib/ipoib_ib.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) --- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c @@ -955,6 +955,19 @@ static inline int update_parent_pkey(str */ priv->dev->broadcast[8] = priv->pkey >> 8; priv->dev->broadcast[9] = priv->pkey & 0xff; + + /* + * Update the broadcast address in the priv->broadcast object, + * in case it already exists, otherwise no one will do that. + */ + if (priv->broadcast) { + spin_lock_irq(&priv->lock); + memcpy(priv->broadcast->mcmember.mgid.raw, + priv->dev->broadcast + 4, + sizeof(union ib_gid)); + spin_unlock_irq(&priv->lock); + } + return 0; } Patches currently in stable-queue which might be from ferasda(a)mellanox.com are queue-3.18/ib-ipoib-update-broadcast-object-if-pkey-value-was-changed-in-index-0.patch

6 years, 9 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror March 2018