March 2018 - Linux-stable-mirror

Patch "ALSA: hda: Add a power_save blacklist" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ALSA: hda: Add a power_save blacklist to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: alsa-hda-add-a-power_save-blacklist.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 1ba8f9d308174e647b864c36209b4d7934d99888 Mon Sep 17 00:00:00 2001 From: Hans de Goede <hdegoede(a)redhat.com> Date: Thu, 22 Feb 2018 14:20:35 +0100 Subject: ALSA: hda: Add a power_save blacklist From: Hans de Goede <hdegoede(a)redhat.com> commit 1ba8f9d308174e647b864c36209b4d7934d99888 upstream. On some boards setting power_save to a non 0 value leads to clicking / popping sounds when ever we enter/leave powersaving mode. Ideally we would figure out how to avoid these sounds, but that is not always feasible. This commit adds a blacklist for devices where powersaving is known to cause problems and disables it on these devices. Note I tried to put this blacklist in userspace first: https://github.com/systemd/systemd/pull/8128 But the systemd maintainers rightfully pointed out that it would be impossible to then later remove entries once we actually find a way to make power-saving work on listed boards without issues. Having this list in the kernel will allow removal of the blacklist entry in the same commit which fixes the clicks / plops. The blacklist only applies to the default power_save module-option value, if a user explicitly sets the module-option then the blacklist is not used. [ added an ifdef CONFIG_PM for the build error -- tiwai] BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1525104 BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=198611 Cc: stable(a)vger.kernel.org Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/pci/hda/hda_intel.c | 38 ++++++++++++++++++++++++++++++++++++-- 1 file changed, 36 insertions(+), 2 deletions(-) --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -181,7 +181,7 @@ static const struct kernel_param_ops par }; #define param_check_xint param_check_int -static int power_save = CONFIG_SND_HDA_POWER_SAVE_DEFAULT; +static int power_save = -1; module_param(power_save, xint, 0644); MODULE_PARM_DESC(power_save, "Automatic power-saving timeout " "(in second, 0 = disable)."); @@ -2186,6 +2186,24 @@ out_free: return err; } +#ifdef CONFIG_PM +/* On some boards setting power_save to a non 0 value leads to clicking / + * popping sounds when ever we enter/leave powersaving mode. Ideally we would + * figure out how to avoid these sounds, but that is not always feasible. + * So we keep a list of devices where we disable powersaving as its known + * to causes problems on these devices. + */ +static struct snd_pci_quirk power_save_blacklist[] = { + /* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */ + SND_PCI_QUIRK(0x1849, 0x0c0c, "Asrock B85M-ITX", 0), + /* https://bugzilla.redhat.com/show_bug.cgi?id=1525104 */ + SND_PCI_QUIRK(0x1043, 0x8733, "Asus Prime X370-Pro", 0), + /* https://bugzilla.kernel.org/show_bug.cgi?id=198611 */ + SND_PCI_QUIRK(0x17aa, 0x2227, "Lenovo X1 Carbon 3rd Gen", 0), + {} +}; +#endif /* CONFIG_PM */ + /* number of codec slots for each chipset: 0 = default slots (i.e. 4) */ static unsigned int azx_max_codecs[AZX_NUM_DRIVERS] = { [AZX_DRIVER_NVIDIA] = 8, @@ -2198,6 +2216,7 @@ static int azx_probe_continue(struct azx struct hdac_bus *bus = azx_bus(chip); struct pci_dev *pci = chip->pci; int dev = chip->dev_index; + int val; int err; hda->probe_continued = 1; @@ -2278,7 +2297,22 @@ static int azx_probe_continue(struct azx chip->running = 1; azx_add_card_list(chip); - snd_hda_set_power_save(&chip->bus, power_save * 1000); + + val = power_save; +#ifdef CONFIG_PM + if (val == -1) { + const struct snd_pci_quirk *q; + + val = CONFIG_SND_HDA_POWER_SAVE_DEFAULT; + q = snd_pci_quirk_lookup(chip->pci, power_save_blacklist); + if (q && val) { + dev_info(chip->card->dev, "device %04x:%04x is on the power_save blacklist, forcing power_save to 0\n", + q->subvendor, q->subdevice); + val = 0; + } + } +#endif /* CONFIG_PM */ + snd_hda_set_power_save(&chip->bus, val * 1000); if (azx_has_pm_runtime(chip) || hda->use_vga_switcheroo) pm_runtime_put_autosuspend(&pci->dev); Patches currently in stable-queue which might be from hdegoede(a)redhat.com are queue-4.14/alsa-hda-add-a-power_save-blacklist.patch queue-4.14/bluetooth-btusb-use-dmi-matching-for-qca-reset_resume-quirking.patch

6 years, 9 months

1
0
0 0

Patch "ALSA: control: Fix memory corruption risk in snd_ctl_elem_read" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ALSA: control: Fix memory corruption risk in snd_ctl_elem_read to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: alsa-control-fix-memory-corruption-risk-in-snd_ctl_elem_read.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 5a23699a39abc5328921a81b89383d088f6ba9cc Mon Sep 17 00:00:00 2001 From: Richard Fitzgerald <rf(a)opensource.cirrus.com> Date: Tue, 27 Feb 2018 17:01:18 +0000 Subject: ALSA: control: Fix memory corruption risk in snd_ctl_elem_read From: Richard Fitzgerald <rf(a)opensource.cirrus.com> commit 5a23699a39abc5328921a81b89383d088f6ba9cc upstream. The patch "ALSA: control: code refactoring for ELEM_READ/ELEM_WRITE operations" introduced a potential for kernel memory corruption due to an incorrect if statement allowing non-readable controls to fall through and call the get function. For TLV controls a driver can omit SNDRV_CTL_ELEM_ACCESS_READ to ensure that only the TLV get function can be called. Instead the normal get() can be invoked unexpectedly and as the driver expects that this will only be called for controls <= 512 bytes, potentially try to copy >512 bytes into the 512 byte return array, so corrupting kernel memory. The problem is an attempt to refactor the snd_ctl_elem_read function to invert the logic so that it conditionally aborted if the control is unreadable instead of conditionally executing. But the if statement wasn't inverted correctly. The correct inversion of if (a && !b) is if (!a || b) Fixes: becf9e5d553c2 ("ALSA: control: code refactoring for ELEM_READ/ELEM_WRITE operations") Signed-off-by: Richard Fitzgerald <rf(a)opensource.cirrus.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/core/control.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/sound/core/control.c +++ b/sound/core/control.c @@ -888,7 +888,7 @@ static int snd_ctl_elem_read(struct snd_ index_offset = snd_ctl_get_ioff(kctl, &control->id); vd = &kctl->vd[index_offset]; - if (!(vd->access & SNDRV_CTL_ELEM_ACCESS_READ) && kctl->get == NULL) + if (!(vd->access & SNDRV_CTL_ELEM_ACCESS_READ) || kctl->get == NULL) return -EPERM; snd_ctl_build_ioff(&control->id, kctl, index_offset); Patches currently in stable-queue which might be from rf(a)opensource.cirrus.com are queue-4.14/alsa-control-fix-memory-corruption-risk-in-snd_ctl_elem_read.patch

6 years, 9 months

1
0
0 0

Patch "cpufreq: s3c24xx: Fix broken s3c_cpufreq_init()" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled cpufreq: s3c24xx: Fix broken s3c_cpufreq_init() to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: cpufreq-s3c24xx-fix-broken-s3c_cpufreq_init.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 0373ca74831b0f93cd4cdbf7ad3aec3c33a479a5 Mon Sep 17 00:00:00 2001 From: Viresh Kumar <viresh.kumar(a)linaro.org> Date: Fri, 23 Feb 2018 09:38:28 +0530 Subject: cpufreq: s3c24xx: Fix broken s3c_cpufreq_init() From: Viresh Kumar <viresh.kumar(a)linaro.org> commit 0373ca74831b0f93cd4cdbf7ad3aec3c33a479a5 upstream. commit a307a1e6bc0d "cpufreq: s3c: use cpufreq_generic_init()" accidentally broke cpufreq on s3c2410 and s3c2412. These two platforms don't have a CPU frequency table and used to skip calling cpufreq_table_validate_and_show() for them. But with the above commit, we started calling it unconditionally and that will eventually fail as the frequency table pointer is NULL. Fix this by calling cpufreq_table_validate_and_show() conditionally again. Fixes: a307a1e6bc0d "cpufreq: s3c: use cpufreq_generic_init()" Cc: 3.13+ <stable(a)vger.kernel.org> # v3.13+ Signed-off-by: Viresh Kumar <viresh.kumar(a)linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki(a)intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/cpufreq/s3c24xx-cpufreq.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) --- a/drivers/cpufreq/s3c24xx-cpufreq.c +++ b/drivers/cpufreq/s3c24xx-cpufreq.c @@ -364,7 +364,13 @@ struct clk *s3c_cpufreq_clk_get(struct d static int s3c_cpufreq_init(struct cpufreq_policy *policy) { policy->clk = clk_arm; - return cpufreq_generic_init(policy, ftab, cpu_cur.info->latency); + + policy->cpuinfo.transition_latency = cpu_cur.info->latency; + + if (ftab) + return cpufreq_table_validate_and_show(policy, ftab); + + return 0; } static int __init s3c_cpufreq_initclks(void) Patches currently in stable-queue which might be from viresh.kumar(a)linaro.org are queue-3.18/cpufreq-s3c24xx-fix-broken-s3c_cpufreq_init.patch

6 years, 9 months

1
0
0 0

Patch "ALSA: usb-audio: Add a quirck for B&W PX headphones" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ALSA: usb-audio: Add a quirck for B&W PX headphones to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: alsa-usb-audio-add-a-quirck-for-b-w-px-headphones.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 240a8af929c7c57dcde28682725b29cf8474e8e5 Mon Sep 17 00:00:00 2001 From: Erik Veijola <erik.veijola(a)gmail.com> Date: Fri, 23 Feb 2018 14:06:52 +0200 Subject: ALSA: usb-audio: Add a quirck for B&W PX headphones From: Erik Veijola <erik.veijola(a)gmail.com> commit 240a8af929c7c57dcde28682725b29cf8474e8e5 upstream. The capture interface doesn't work and the playback interface only supports 48 kHz sampling rate even though it advertises more rates. Signed-off-by: Erik Veijola <erik.veijola(a)gmail.com> Cc: <stable(a)vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/usb/quirks-table.h | 47 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+) --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3312,4 +3312,51 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge } }, +{ + /* + * Bower's & Wilkins PX headphones only support the 48 kHz sample rate + * even though it advertises more. The capture interface doesn't work + * even on windows. + */ + USB_DEVICE(0x19b5, 0x0021), + .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { + .ifnum = QUIRK_ANY_INTERFACE, + .type = QUIRK_COMPOSITE, + .data = (const struct snd_usb_audio_quirk[]) { + { + .ifnum = 0, + .type = QUIRK_AUDIO_STANDARD_MIXER, + }, + /* Capture */ + { + .ifnum = 1, + .type = QUIRK_IGNORE_INTERFACE, + }, + /* Playback */ + { + .ifnum = 2, + .type = QUIRK_AUDIO_FIXED_ENDPOINT, + .data = &(const struct audioformat) { + .formats = SNDRV_PCM_FMTBIT_S16_LE, + .channels = 2, + .iface = 2, + .altsetting = 1, + .altset_idx = 1, + .attributes = UAC_EP_CS_ATTR_FILL_MAX | + UAC_EP_CS_ATTR_SAMPLE_RATE, + .endpoint = 0x03, + .ep_attr = USB_ENDPOINT_XFER_ISOC, + .rates = SNDRV_PCM_RATE_48000, + .rate_min = 48000, + .rate_max = 48000, + .nr_rates = 1, + .rate_table = (unsigned int[]) { + 48000 + } + } + }, + } + } +}, + #undef USB_DEVICE_VENDOR_SPEC Patches currently in stable-queue which might be from erik.veijola(a)gmail.com are queue-3.18/alsa-usb-audio-add-a-quirck-for-b-w-px-headphones.patch

6 years, 9 months

1
0
0 0

Patch "Bluetooth: btusb: Use DMI matching for QCA reset_resume quirking" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Bluetooth: btusb: Use DMI matching for QCA reset_resume quirking to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bluetooth-btusb-use-dmi-matching-for-qca-reset_resume-quirking.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 1fdb926974695d3dbc05a429bafa266fdd16510e Mon Sep 17 00:00:00 2001 From: Hans de Goede <hdegoede(a)redhat.com> Date: Tue, 20 Feb 2018 09:06:18 +0100 Subject: Bluetooth: btusb: Use DMI matching for QCA reset_resume quirking From: Hans de Goede <hdegoede(a)redhat.com> commit 1fdb926974695d3dbc05a429bafa266fdd16510e upstream. Commit 61f5acea8737 ("Bluetooth: btusb: Restore QCA Rome suspend/resume fix with a "rewritten" version") applied the USB_QUIRK_RESET_RESUME to all QCA USB Bluetooth modules. But it turns out that the resume problems are not caused by the QCA Rome chipset, on most platforms it resumes fine. The resume problems are actually a platform problem (likely the platform cutting all power when suspended). The USB_QUIRK_RESET_RESUME quirk also disables runtime suspend, so by matching on usb-ids, we're causing all boards with these chips to use extra power, to fix resume problems which only happen on some boards. This commit fixes this by applying the quirk based on DMI matching instead of on usb-ids, so that we match the platform and not the chipset. Here is the /sys/kernel/debug/usb/devices for the Bluetooth module: T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e300 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514836 Fixes: 61f5acea8737 ("Bluetooth: btusb: Restore QCA Rome suspend/resume..") Cc: stable(a)vger.kernel.org Cc: Brian Norris <briannorris(a)chromium.org> Cc: Kai-Heng Feng <kai.heng.feng(a)canonical.com> Reported-and-tested-by: Kevin Fenzi <kevin(a)scrye.com> Signed-off-by: Hans de Goede <hdegoede(a)redhat.com> Signed-off-by: Marcel Holtmann <marcel(a)holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/bluetooth/btusb.c | 25 +++++++++++++++++++------ 1 file changed, 19 insertions(+), 6 deletions(-) --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -21,6 +21,7 @@ * */ +#include <linux/dmi.h> #include <linux/module.h> #include <linux/usb.h> #include <linux/usb/quirks.h> @@ -349,6 +350,21 @@ static const struct usb_device_id blackl { } /* Terminating entry */ }; +/* The Bluetooth USB module build into some devices needs to be reset on resume, + * this is a problem with the platform (likely shutting off all power) not with + * the module itself. So we use a DMI list to match known broken platforms. + */ +static const struct dmi_system_id btusb_needs_reset_resume_table[] = { + { + /* Lenovo Yoga 920 (QCA Rome device 0cf3:e300) */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo YOGA 920"), + }, + }, + {} +}; + #define BTUSB_MAX_ISOC_FRAMES 10 #define BTUSB_INTR_RUNNING 0 @@ -2970,12 +2986,6 @@ static int btusb_probe(struct usb_interf if (id->driver_info & BTUSB_QCA_ROME) { data->setup_on_usb = btusb_setup_qca; hdev->set_bdaddr = btusb_set_bdaddr_ath3012; - - /* QCA Rome devices lose their updated firmware over suspend, - * but the USB hub doesn't notice any status change. - * explicitly request a device reset on resume. - */ - interface_to_usbdev(intf)->quirks |= USB_QUIRK_RESET_RESUME; } #ifdef CONFIG_BT_HCIBTUSB_RTL @@ -3118,6 +3128,9 @@ static void btusb_disconnect(struct usb_ hci_free_dev(hdev); } + if (dmi_check_system(btusb_needs_reset_resume_table)) + interface_to_usbdev(intf)->quirks |= USB_QUIRK_RESET_RESUME; + #ifdef CONFIG_PM static int btusb_suspend(struct usb_interface *intf, pm_message_t message) { Patches currently in stable-queue which might be from hdegoede(a)redhat.com are queue-4.4/bluetooth-btusb-use-dmi-matching-for-qca-reset_resume-quirking.patch

6 years, 9 months

2
1
0 0

FAILED: patch "[PATCH] KVM: x86: fix vcpu initialization with userspace lapic" failed to apply to 4.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From b7e31be385584afe7f073130e8e570d53c95f7fe Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Radim=20Kr=C4=8Dm=C3=A1=C5=99?= <rkrcmar(a)redhat.com> Date: Thu, 1 Mar 2018 15:24:25 +0100 Subject: [PATCH] KVM: x86: fix vcpu initialization with userspace lapic MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Moving the code around broke this rare configuration. Use this opportunity to finally call lapic reset from vcpu reset. Reported-by: syzbot+fb7a33a4b6c35007a72b(a)syzkaller.appspotmail.com Suggested-by: Paolo Bonzini <pbonzini(a)redhat.com> Fixes: 0b2e9904c159 ("KVM: x86: move LAPIC initialization after VMCS creation") Cc: stable(a)vger.kernel.org Signed-off-by: Radim Krčmář <rkrcmar(a)redhat.com> diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index cc5fe7a50dde..391dda8d43b7 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -2002,14 +2002,13 @@ void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value) void kvm_lapic_reset(struct kvm_vcpu *vcpu, bool init_event) { - struct kvm_lapic *apic; + struct kvm_lapic *apic = vcpu->arch.apic; int i; - apic_debug("%s\n", __func__); + if (!apic) + return; - ASSERT(vcpu); - apic = vcpu->arch.apic; - ASSERT(apic != NULL); + apic_debug("%s\n", __func__); /* Stop the timer in case it's a reset to an active apic */ hrtimer_cancel(&apic->lapic_timer.timer); @@ -2568,7 +2567,6 @@ void kvm_apic_accept_events(struct kvm_vcpu *vcpu) pe = xchg(&apic->pending_events, 0); if (test_bit(KVM_APIC_INIT, &pe)) { - kvm_lapic_reset(vcpu, true); kvm_vcpu_reset(vcpu, true); if (kvm_vcpu_is_bsp(apic->vcpu)) vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE; diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 11649d290b93..18b5ca7a3197 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -8060,7 +8060,6 @@ int kvm_arch_vcpu_setup(struct kvm_vcpu *vcpu) kvm_vcpu_mtrr_init(vcpu); vcpu_load(vcpu); kvm_vcpu_reset(vcpu, false); - kvm_lapic_reset(vcpu, false); kvm_mmu_setup(vcpu); vcpu_put(vcpu); return 0; @@ -8103,6 +8102,8 @@ void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu) void kvm_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event) { + kvm_lapic_reset(vcpu, init_event); + vcpu->arch.hflags = 0; vcpu->arch.smi_pending = 0;

6 years, 9 months

1
0
0 0

FAILED: patch "[PATCH] memremap: fix softlockup reports at teardown" failed to apply to 4.14-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.14-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 949b93250a566cc7a578b4f829cf76b70d19a62c Mon Sep 17 00:00:00 2001 From: Dan Williams <dan.j.williams(a)intel.com> Date: Tue, 6 Feb 2018 19:34:11 -0800 Subject: [PATCH] memremap: fix softlockup reports at teardown MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The cond_resched() currently in the setup path needs to be duplicated in the teardown path. Rather than require each instance of for_each_device_pfn() to open code the same sequence, embed it in the helper. Link: https://github.com/intel/ixpdimm_sw/issues/11 Cc: "Jérôme Glisse" <jglisse(a)redhat.com> Cc: Michal Hocko <mhocko(a)suse.com> Cc: Christoph Hellwig <hch(a)lst.de> Cc: <stable(a)vger.kernel.org> Fixes: 71389703839e ("mm, zone_device: Replace {get, put}_zone_device_page()...") Signed-off-by: Dan Williams <dan.j.williams(a)intel.com> diff --git a/kernel/memremap.c b/kernel/memremap.c index 4849be5f9b3c..4dd4274cabe2 100644 --- a/kernel/memremap.c +++ b/kernel/memremap.c @@ -275,8 +275,15 @@ static unsigned long pfn_end(struct dev_pagemap *pgmap) return (res->start + resource_size(res)) >> PAGE_SHIFT; } +static unsigned long pfn_next(unsigned long pfn) +{ + if (pfn % 1024 == 0) + cond_resched(); + return pfn + 1; +} + #define for_each_device_pfn(pfn, map) \ - for (pfn = pfn_first(map); pfn < pfn_end(map); pfn++) + for (pfn = pfn_first(map); pfn < pfn_end(map); pfn = pfn_next(pfn)) static void devm_memremap_pages_release(void *data) { @@ -337,10 +344,10 @@ void *devm_memremap_pages(struct device *dev, struct dev_pagemap *pgmap) resource_size_t align_start, align_size, align_end; struct vmem_altmap *altmap = pgmap->altmap_valid ? &pgmap->altmap : NULL; + struct resource *res = &pgmap->res; unsigned long pfn, pgoff, order; pgprot_t pgprot = PAGE_KERNEL; - int error, nid, is_ram, i = 0; - struct resource *res = &pgmap->res; + int error, nid, is_ram; align_start = res->start & ~(SECTION_SIZE - 1); align_size = ALIGN(res->start + resource_size(res), SECTION_SIZE) @@ -409,8 +416,6 @@ void *devm_memremap_pages(struct device *dev, struct dev_pagemap *pgmap) list_del(&page->lru); page->pgmap = pgmap; percpu_ref_get(pgmap->ref); - if (!(++i % 1024)) - cond_resched(); } devm_add_action(dev, devm_memremap_pages_release, pgmap);

6 years, 9 months

1
0
0 0

FAILED: patch "[PATCH] memremap: fix softlockup reports at teardown" failed to apply to 4.15-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.15-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 949b93250a566cc7a578b4f829cf76b70d19a62c Mon Sep 17 00:00:00 2001 From: Dan Williams <dan.j.williams(a)intel.com> Date: Tue, 6 Feb 2018 19:34:11 -0800 Subject: [PATCH] memremap: fix softlockup reports at teardown MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The cond_resched() currently in the setup path needs to be duplicated in the teardown path. Rather than require each instance of for_each_device_pfn() to open code the same sequence, embed it in the helper. Link: https://github.com/intel/ixpdimm_sw/issues/11 Cc: "Jérôme Glisse" <jglisse(a)redhat.com> Cc: Michal Hocko <mhocko(a)suse.com> Cc: Christoph Hellwig <hch(a)lst.de> Cc: <stable(a)vger.kernel.org> Fixes: 71389703839e ("mm, zone_device: Replace {get, put}_zone_device_page()...") Signed-off-by: Dan Williams <dan.j.williams(a)intel.com> diff --git a/kernel/memremap.c b/kernel/memremap.c index 4849be5f9b3c..4dd4274cabe2 100644 --- a/kernel/memremap.c +++ b/kernel/memremap.c @@ -275,8 +275,15 @@ static unsigned long pfn_end(struct dev_pagemap *pgmap) return (res->start + resource_size(res)) >> PAGE_SHIFT; } +static unsigned long pfn_next(unsigned long pfn) +{ + if (pfn % 1024 == 0) + cond_resched(); + return pfn + 1; +} + #define for_each_device_pfn(pfn, map) \ - for (pfn = pfn_first(map); pfn < pfn_end(map); pfn++) + for (pfn = pfn_first(map); pfn < pfn_end(map); pfn = pfn_next(pfn)) static void devm_memremap_pages_release(void *data) { @@ -337,10 +344,10 @@ void *devm_memremap_pages(struct device *dev, struct dev_pagemap *pgmap) resource_size_t align_start, align_size, align_end; struct vmem_altmap *altmap = pgmap->altmap_valid ? &pgmap->altmap : NULL; + struct resource *res = &pgmap->res; unsigned long pfn, pgoff, order; pgprot_t pgprot = PAGE_KERNEL; - int error, nid, is_ram, i = 0; - struct resource *res = &pgmap->res; + int error, nid, is_ram; align_start = res->start & ~(SECTION_SIZE - 1); align_size = ALIGN(res->start + resource_size(res), SECTION_SIZE) @@ -409,8 +416,6 @@ void *devm_memremap_pages(struct device *dev, struct dev_pagemap *pgmap) list_del(&page->lru); page->pgmap = pgmap; percpu_ref_get(pgmap->ref); - if (!(++i % 1024)) - cond_resched(); } devm_add_action(dev, devm_memremap_pages_release, pgmap);

6 years, 9 months

1
0
0 0

FAILED: patch "[PATCH] vfio: disable filesystem-dax page pinning" failed to apply to 4.4-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 94db151dc89262bfa82922c44e8320cea2334667 Mon Sep 17 00:00:00 2001 From: Dan Williams <dan.j.williams(a)intel.com> Date: Sun, 4 Feb 2018 10:34:02 -0800 Subject: [PATCH] vfio: disable filesystem-dax page pinning Filesystem-DAX is incompatible with 'longterm' page pinning. Without page cache indirection a DAX mapping maps filesystem blocks directly. This means that the filesystem must not modify a file's block map while any page in a mapping is pinned. In order to prevent the situation of userspace holding of filesystem operations indefinitely, disallow 'longterm' Filesystem-DAX mappings. RDMA has the same conflict and the plan there is to add a 'with lease' mechanism to allow the kernel to notify userspace that the mapping is being torn down for block-map maintenance. Perhaps something similar can be put in place for vfio. Note that xfs and ext4 still report: "DAX enabled. Warning: EXPERIMENTAL, use at your own risk" ...at mount time, and resolving the dax-dma-vs-truncate problem is one of the last hurdles to remove that designation. Acked-by: Alex Williamson <alex.williamson(a)redhat.com> Cc: Michal Hocko <mhocko(a)suse.com> Cc: kvm(a)vger.kernel.org Cc: <stable(a)vger.kernel.org> Reported-by: Haozhong Zhang <haozhong.zhang(a)intel.com> Tested-by: Haozhong Zhang <haozhong.zhang(a)intel.com> Fixes: d475c6346a38 ("dax,ext2: replace XIP read and write with DAX I/O") Reviewed-by: Christoph Hellwig <hch(a)lst.de> Signed-off-by: Dan Williams <dan.j.williams(a)intel.com> diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c index e30e29ae4819..45657e2b1ff7 100644 --- a/drivers/vfio/vfio_iommu_type1.c +++ b/drivers/vfio/vfio_iommu_type1.c @@ -338,11 +338,12 @@ static int vaddr_get_pfn(struct mm_struct *mm, unsigned long vaddr, { struct page *page[1]; struct vm_area_struct *vma; + struct vm_area_struct *vmas[1]; int ret; if (mm == current->mm) { - ret = get_user_pages_fast(vaddr, 1, !!(prot & IOMMU_WRITE), - page); + ret = get_user_pages_longterm(vaddr, 1, !!(prot & IOMMU_WRITE), + page, vmas); } else { unsigned int flags = 0; @@ -351,7 +352,18 @@ static int vaddr_get_pfn(struct mm_struct *mm, unsigned long vaddr, down_read(&mm->mmap_sem); ret = get_user_pages_remote(NULL, mm, vaddr, 1, flags, page, - NULL, NULL); + vmas, NULL); + /* + * The lifetime of a vaddr_get_pfn() page pin is + * userspace-controlled. In the fs-dax case this could + * lead to indefinite stalls in filesystem operations. + * Disallow attempts to pin fs-dax pages via this + * interface. + */ + if (ret > 0 && vma_is_fsdax(vmas[0])) { + ret = -EOPNOTSUPP; + put_page(page[0]); + } up_read(&mm->mmap_sem); }

6 years, 9 months

1
0
0 0

FAILED: patch "[PATCH] vfio: disable filesystem-dax page pinning" failed to apply to 4.9-stable tree

by gregkh＠linuxfoundation.org

The patch below does not apply to the 4.9-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <stable(a)vger.kernel.org>. thanks, greg k-h ------------------ original commit in Linus's tree ------------------ >From 94db151dc89262bfa82922c44e8320cea2334667 Mon Sep 17 00:00:00 2001 From: Dan Williams <dan.j.williams(a)intel.com> Date: Sun, 4 Feb 2018 10:34:02 -0800 Subject: [PATCH] vfio: disable filesystem-dax page pinning Filesystem-DAX is incompatible with 'longterm' page pinning. Without page cache indirection a DAX mapping maps filesystem blocks directly. This means that the filesystem must not modify a file's block map while any page in a mapping is pinned. In order to prevent the situation of userspace holding of filesystem operations indefinitely, disallow 'longterm' Filesystem-DAX mappings. RDMA has the same conflict and the plan there is to add a 'with lease' mechanism to allow the kernel to notify userspace that the mapping is being torn down for block-map maintenance. Perhaps something similar can be put in place for vfio. Note that xfs and ext4 still report: "DAX enabled. Warning: EXPERIMENTAL, use at your own risk" ...at mount time, and resolving the dax-dma-vs-truncate problem is one of the last hurdles to remove that designation. Acked-by: Alex Williamson <alex.williamson(a)redhat.com> Cc: Michal Hocko <mhocko(a)suse.com> Cc: kvm(a)vger.kernel.org Cc: <stable(a)vger.kernel.org> Reported-by: Haozhong Zhang <haozhong.zhang(a)intel.com> Tested-by: Haozhong Zhang <haozhong.zhang(a)intel.com> Fixes: d475c6346a38 ("dax,ext2: replace XIP read and write with DAX I/O") Reviewed-by: Christoph Hellwig <hch(a)lst.de> Signed-off-by: Dan Williams <dan.j.williams(a)intel.com> diff --git a/drivers/vfio/vfio_iommu_type1.c b/drivers/vfio/vfio_iommu_type1.c index e30e29ae4819..45657e2b1ff7 100644 --- a/drivers/vfio/vfio_iommu_type1.c +++ b/drivers/vfio/vfio_iommu_type1.c @@ -338,11 +338,12 @@ static int vaddr_get_pfn(struct mm_struct *mm, unsigned long vaddr, { struct page *page[1]; struct vm_area_struct *vma; + struct vm_area_struct *vmas[1]; int ret; if (mm == current->mm) { - ret = get_user_pages_fast(vaddr, 1, !!(prot & IOMMU_WRITE), - page); + ret = get_user_pages_longterm(vaddr, 1, !!(prot & IOMMU_WRITE), + page, vmas); } else { unsigned int flags = 0; @@ -351,7 +352,18 @@ static int vaddr_get_pfn(struct mm_struct *mm, unsigned long vaddr, down_read(&mm->mmap_sem); ret = get_user_pages_remote(NULL, mm, vaddr, 1, flags, page, - NULL, NULL); + vmas, NULL); + /* + * The lifetime of a vaddr_get_pfn() page pin is + * userspace-controlled. In the fs-dax case this could + * lead to indefinite stalls in filesystem operations. + * Disallow attempts to pin fs-dax pages via this + * interface. + */ + if (ret > 0 && vma_is_fsdax(vmas[0])) { + ret = -EOPNOTSUPP; + put_page(page[0]); + } up_read(&mm->mmap_sem); }

6 years, 9 months

1
0
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror March 2018