March 2018 - Linux-stable-mirror

Patch "ARM: dts: koelsch: Move cec_clock to root node" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: koelsch: Move cec_clock to root node to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-koelsch-move-cec_clock-to-root-node.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:43:16 CET 2018 From: Simon Horman <horms+renesas(a)verge.net.au> Date: Thu, 2 Nov 2017 10:18:05 +0100 Subject: ARM: dts: koelsch: Move cec_clock to root node From: Simon Horman <horms+renesas(a)verge.net.au> [ Upstream commit d72f4f03854d1225c72d682bf0e01377e7016419 ] cec-clock is a fixed clock generator that is not controlled by i2c5 and thus should not be a child of the i2c5 bus node. Rather, it should be a child of the root node of the DT. Fixes: 02a5ab18d366 ("ARM: dts: koelsch: Add CEC clock for HDMI transmitter") Reported-by: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas(a)verge.net.au> Reviewed-by: Laurent Pinchart <laurent.pinchart(a)ideasonboard.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/r8a7791-koelsch.dts | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -278,6 +278,12 @@ }; }; + cec_clock: cec-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; + hdmi-out { compatible = "hdmi-connector"; type = "a"; @@ -642,12 +648,6 @@ }; }; - cec_clock: cec-clock { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <12000000>; - }; - hdmi@39 { compatible = "adi,adv7511w"; reg = <0x39>; Patches currently in stable-queue which might be from horms+renesas(a)verge.net.au are queue-4.14/arm64-dts-renesas-salvator-common-add-ethernetavb-phy-reset.patch queue-4.14/usb-host-xhci-rcar-add-support-for-r8a77965.patch queue-4.14/arm-dts-koelsch-move-cec_clock-to-root-node.patch

6 years, 10 months

1
0
0 0

Patch "ARM: dts: exynos: Correct Trats2 panel reset line" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: exynos: Correct Trats2 panel reset line to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-exynos-correct-trats2-panel-reset-line.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:43:16 CET 2018 From: Simon Shields <simon(a)lineageos.org> Date: Tue, 21 Nov 2017 22:24:24 +1100 Subject: ARM: dts: exynos: Correct Trats2 panel reset line From: Simon Shields <simon(a)lineageos.org> [ Upstream commit 1b377924841df1e13ab5b225be3a83f807a92b52 ] Trats2 uses gpf2-1 as the panel reset GPIO. gpy4-5 was only used on early revisions of the board. Fixes: 420ae8451a22 ("ARM: dts: exynos4412-trats2: add panel node") Signed-off-by: Simon Shields <simon(a)lineageos.org> Acked-by: Marek Szyprowski <m.szyprowski(a)samsung.com> Tested-by: Marek Szyprowski <m.szyprowski(a)samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/exynos4412-trats2.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -395,7 +395,7 @@ reg = <0>; vdd3-supply = <&lcd_vdd3_reg>; vci-supply = <&ldo25_reg>; - reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpf2 1 GPIO_ACTIVE_HIGH>; power-on-delay= <50>; reset-delay = <100>; init-delay = <100>; Patches currently in stable-queue which might be from simon(a)lineageos.org are queue-4.14/arm-dts-exynos-correct-trats2-panel-reset-line.patch

6 years, 10 months

1
0
0 0

Patch "ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: arm-dts-am335x-pepper-fix-the-audio-codec-s-reset-pin.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:43:17 CET 2018 From: "Andrew F. Davis" <afd(a)ti.com> Date: Wed, 29 Nov 2017 11:13:56 -0600 Subject: ARM: dts: am335x-pepper: Fix the audio CODEC's reset pin From: "Andrew F. Davis" <afd(a)ti.com> [ Upstream commit e153db03c6b7a035c797bcdf35262586f003ee93 ] The correct DT property for specifying a GPIO used for reset is "reset-gpios", fix this here. Fixes: 4341881d0562 ("ARM: dts: Add devicetree for Gumstix Pepper board") Signed-off-by: Andrew F. Davis <afd(a)ti.com> Signed-off-by: Tony Lindgren <tony(a)atomide.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/arm/boot/dts/am335x-pepper.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/arm/boot/dts/am335x-pepper.dts +++ b/arch/arm/boot/dts/am335x-pepper.dts @@ -139,7 +139,7 @@ &audio_codec { status = "okay"; - gpio-reset = <&gpio1 16 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; AVDD-supply = <&ldo3_reg>; IOVDD-supply = <&ldo3_reg>; DRVDD-supply = <&ldo3_reg>; Patches currently in stable-queue which might be from afd(a)ti.com are queue-4.14/arm-dts-omap3-n900-fix-the-audio-codec-s-reset-pin.patch queue-4.14/arm-dts-am335x-pepper-fix-the-audio-codec-s-reset-pin.patch

6 years, 10 months

1
0
0 0

Patch "agp/intel: Flush all chipset writes after updating the GGTT" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled agp/intel: Flush all chipset writes after updating the GGTT to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: agp-intel-flush-all-chipset-writes-after-updating-the-ggtt.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:43:17 CET 2018 From: Chris Wilson <chris(a)chris-wilson.co.uk> Date: Fri, 8 Dec 2017 21:46:16 +0000 Subject: agp/intel: Flush all chipset writes after updating the GGTT From: Chris Wilson <chris(a)chris-wilson.co.uk> [ Upstream commit 8516673a996870ea0ceb337ee4f83c33c5ec3111 ] Before accessing the GGTT we must flush the PTE writes and make them visible to the chipset, or else the indirect access may end up in the wrong page. In commit 3497971a71d8 ("agp/intel: Flush chipset writes after updating a single PTE"), we noticed corruption of the uploads for pwrite and for capturing GPU error states, but it was presumed that the explicit calls to intel_gtt_chipset_flush() were sufficient for the execbuffer path. However, we have not been flushing the chipset between the PTE writes and access via the GTT itself. For simplicity, do the flush after any PTE update rather than try and batch the flushes on a just-in-time basis. References: 3497971a71d8 ("agp/intel: Flush chipset writes after updating a single PTE") Signed-off-by: Chris Wilson <chris(a)chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin(a)intel.com> Cc: Mika Kuoppala <mika.kuoppala(a)intel.com> Cc: drm-intel-fixes(a)lists.freedesktop.org Reviewed-by: Joonas Lahtinen <joonas.lahtinen(a)linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171208214616.30147-1-chris@… Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/char/agp/intel-gtt.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/char/agp/intel-gtt.c +++ b/drivers/char/agp/intel-gtt.c @@ -872,6 +872,8 @@ void intel_gtt_insert_sg_entries(struct } } wmb(); + if (intel_private.driver->chipset_flush) + intel_private.driver->chipset_flush(); } EXPORT_SYMBOL(intel_gtt_insert_sg_entries); Patches currently in stable-queue which might be from chris(a)chris-wilson.co.uk are queue-4.14/dma-buf-fence-fix-lock-inversion-within-dma-fence-array.patch queue-4.14/agp-intel-flush-all-chipset-writes-after-updating-the-ggtt.patch

6 years, 10 months

1
0
0 0

[PATCH] mm/shmem: Do not wait for lock_page() in shmem_unused_huge_shrink()

by Kirill A. Shutemov

shmem_unused_huge_shrink() gets called from reclaim path. Waiting for page lock may lead to deadlock there. Replace lock_page() with trylock_page() and skip the page if we failed to lock it. We will get to the page on the next scan. Signed-off-by: Kirill A. Shutemov <kirill.shutemov(a)linux.intel.com> Fixes: 779750d20b93 ("shmem: split huge pages beyond i_size under memory pressure") Cc: stable(a)vger.kernel.org # v4.8+ --- mm/shmem.c | 25 ++++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-) diff --git a/mm/shmem.c b/mm/shmem.c index 1907688b75ee..2afe809d4bd4 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -498,31 +498,42 @@ static unsigned long shmem_unused_huge_shrink(struct shmem_sb_info *sbinfo, continue; } - page = find_lock_page(inode->i_mapping, + page = find_get_page(inode->i_mapping, (inode->i_size & HPAGE_PMD_MASK) >> PAGE_SHIFT); if (!page) goto drop; + /* No huge page at the end of the file: nothing to split */ if (!PageTransHuge(page)) { - unlock_page(page); put_page(page); goto drop; } + /* + * Leave the inode on the list if we failed to lock + * the page at this time. + * + * Waiting for the lock may lead to deadlock in the + * reclaim path. + */ + if (!trylock_page(page)) { + put_page(page); + goto leave; + } + ret = split_huge_page(page); unlock_page(page); put_page(page); - if (ret) { - /* split failed: leave it on the list */ - iput(inode); - continue; - } + /* If split failed leave the inode on the list */ + if (ret) + goto leave; split++; drop: list_del_init(&info->shrinklist); removed++; +leave: iput(inode); } -- 2.16.1

6 years, 10 months

4
8
0 0

Patch "xfrm: Fix xfrm_replay_overflow_offload_esn" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled xfrm: Fix xfrm_replay_overflow_offload_esn to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: xfrm-fix-xfrm_replay_overflow_offload_esn.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:07 CET 2018 From: Yossef Efraim <yossefe(a)mellanox.com> Date: Tue, 28 Nov 2017 11:49:28 +0200 Subject: xfrm: Fix xfrm_replay_overflow_offload_esn From: Yossef Efraim <yossefe(a)mellanox.com> [ Upstream commit 0ba23a211360af7b6658e4fcfc571970bbbacc55 ] In case of wrap around, replay_esn->oseq_hi is not updated before it is tested for it's actual value, leading function to fail with overflow indication and packets being dropped. This patch updates replay_esn->oseq_hi in the right place. Fixes: d7dbefc45cf5 ("xfrm: Add xfrm_replay_overflow functions for offloading") Signed-off-by: Yossef Efraim <yossefe(a)mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert(a)secunet.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/xfrm/xfrm_replay.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) --- a/net/xfrm/xfrm_replay.c +++ b/net/xfrm/xfrm_replay.c @@ -666,7 +666,7 @@ static int xfrm_replay_overflow_offload_ if (unlikely(oseq < replay_esn->oseq)) { XFRM_SKB_CB(skb)->seq.output.hi = ++oseq_hi; xo->seq.hi = oseq_hi; - + replay_esn->oseq_hi = oseq_hi; if (replay_esn->oseq_hi == 0) { replay_esn->oseq--; replay_esn->oseq_hi--; @@ -678,7 +678,6 @@ static int xfrm_replay_overflow_offload_ } replay_esn->oseq = oseq; - replay_esn->oseq_hi = oseq_hi; if (xfrm_aevent_is_on(net)) x->repl->notify(x, XFRM_REPLAY_UPDATE); Patches currently in stable-queue which might be from yossefe(a)mellanox.com are queue-4.15/xfrm-fix-xfrm_replay_overflow_offload_esn.patch

6 years, 10 months

1
0
0 0

Patch "virtio_net: Disable interrupts if napi_complete_done rescheduled napi" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled virtio_net: Disable interrupts if napi_complete_done rescheduled napi to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: virtio_net-disable-interrupts-if-napi_complete_done-rescheduled-napi.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:08 CET 2018 From: Toshiaki Makita <makita.toshiaki(a)lab.ntt.co.jp> Date: Thu, 7 Dec 2017 13:15:15 +0900 Subject: virtio_net: Disable interrupts if napi_complete_done rescheduled napi From: Toshiaki Makita <makita.toshiaki(a)lab.ntt.co.jp> [ Upstream commit fdaa767aefc1685f9a41e91f447c9aea94103df6 ] Since commit 39e6c8208d7b ("net: solve a NAPI race") napi has been able to be rescheduled within napi_complete_done() even in non-busypoll case, but virtnet_poll() always enabled interrupts before complete, and when napi was rescheduled within napi_complete_done() it did not disable interrupts. This caused more interrupts when event idx is disabled. According to commit cbdadbbf0c79 ("virtio_net: fix race in RX VQ processing") we cannot place virtqueue_enable_cb_prepare() after NAPI_STATE_SCHED is cleared, so disable interrupts again if napi_complete_done() returned false. Tested with vhost-user of OVS 2.7 on host, which does not have the event idx feature. * Before patch: $ netperf -t UDP_STREAM -H 192.168.150.253 -l 60 -- -m 1472 MIGRATED UDP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.150.253 () port 0 AF_INET Socket Message Elapsed Messages Size Size Time Okay Errors Throughput bytes bytes secs # # 10^6bits/sec 212992 1472 60.00 32763206 0 6430.32 212992 60.00 23384299 4589.56 Interrupts on guest: 9872369 Packets/interrupt: 2.37 * After patch $ netperf -t UDP_STREAM -H 192.168.150.253 -l 60 -- -m 1472 MIGRATED UDP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.150.253 () port 0 AF_INET Socket Message Elapsed Messages Size Size Time Okay Errors Throughput bytes bytes secs # # 10^6bits/sec 212992 1472 60.00 32794646 0 6436.49 212992 60.00 32793501 6436.27 Interrupts on guest: 4941299 Packets/interrupt: 6.64 Signed-off-by: Toshiaki Makita <makita.toshiaki(a)lab.ntt.co.jp> Acked-by: Michael S. Tsirkin <mst(a)redhat.com> Acked-by: Jason Wang <jasowang(a)redhat.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/virtio_net.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -261,9 +261,12 @@ static void virtqueue_napi_complete(stru int opaque; opaque = virtqueue_enable_cb_prepare(vq); - if (napi_complete_done(napi, processed) && - unlikely(virtqueue_poll(vq, opaque))) - virtqueue_napi_schedule(napi, vq); + if (napi_complete_done(napi, processed)) { + if (unlikely(virtqueue_poll(vq, opaque))) + virtqueue_napi_schedule(napi, vq); + } else { + virtqueue_disable_cb(vq); + } } static void skb_xmit_done(struct virtqueue *vq) Patches currently in stable-queue which might be from makita.toshiaki(a)lab.ntt.co.jp are queue-4.15/virtio_net-disable-interrupts-if-napi_complete_done-rescheduled-napi.patch

6 years, 10 months

1
0
0 0

Patch "video/hdmi: Allow "empty" HDMI infoframes" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled video/hdmi: Allow "empty" HDMI infoframes to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: video-hdmi-allow-empty-hdmi-infoframes.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:07 CET 2018 From: "Ville Syrjälä" <ville.syrjala(a)linux.intel.com> Date: Mon, 13 Nov 2017 19:04:18 +0200 Subject: video/hdmi: Allow "empty" HDMI infoframes From: "Ville Syrjälä" <ville.syrjala(a)linux.intel.com> [ Upstream commit 593f4b19a094c4426bd1e1e3cbab87a48bd13c71 ] HDMI 2.0 Appendix F suggest that we should keep sending the infoframe when switching from 3D to 2D mode, even if the infoframe isn't strictly necessary (ie. not needed to transmit the VIC or stereo information). This is a workaround against some sinks that fail to realize that they should switch from 3D to 2D mode when the source stop transmitting the infoframe. v2: Handle unpack() as well Pull the length calculation into a helper Cc: Shashank Sharma <shashank.sharma(a)intel.com> Cc: Andrzej Hajda <a.hajda(a)samsung.com> Cc: Thierry Reding <thierry.reding(a)gmail.com> Cc: Hans Verkuil <hans.verkuil(a)cisco.com> Cc: linux-media(a)vger.kernel.org Reviewed-by: Andrzej Hajda <a.hajda(a)samsung.com> #v1 Signed-off-by: Ville SyrjÃ¤lÃ¤ <ville.syrjala(a)linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171113170427.4150-2-ville.s… Reviewed-by: Shashank Sharma <shashank.sharma(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/video/hdmi.c | 51 +++++++++++++++++++++++++++++++-------------------- 1 file changed, 31 insertions(+), 20 deletions(-) --- a/drivers/video/hdmi.c +++ b/drivers/video/hdmi.c @@ -321,6 +321,17 @@ int hdmi_vendor_infoframe_init(struct hd } EXPORT_SYMBOL(hdmi_vendor_infoframe_init); +static int hdmi_vendor_infoframe_length(const struct hdmi_vendor_infoframe *frame) +{ + /* for side by side (half) we also need to provide 3D_Ext_Data */ + if (frame->s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF) + return 6; + else if (frame->vic != 0 || frame->s3d_struct != HDMI_3D_STRUCTURE_INVALID) + return 5; + else + return 4; +} + /** * hdmi_vendor_infoframe_pack() - write a HDMI vendor infoframe to binary buffer * @frame: HDMI infoframe @@ -341,19 +352,11 @@ ssize_t hdmi_vendor_infoframe_pack(struc u8 *ptr = buffer; size_t length; - /* empty info frame */ - if (frame->vic == 0 && frame->s3d_struct == HDMI_3D_STRUCTURE_INVALID) - return -EINVAL; - /* only one of those can be supplied */ if (frame->vic != 0 && frame->s3d_struct != HDMI_3D_STRUCTURE_INVALID) return -EINVAL; - /* for side by side (half) we also need to provide 3D_Ext_Data */ - if (frame->s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF) - frame->length = 6; - else - frame->length = 5; + frame->length = hdmi_vendor_infoframe_length(frame); length = HDMI_INFOFRAME_HEADER_SIZE + frame->length; @@ -372,14 +375,16 @@ ssize_t hdmi_vendor_infoframe_pack(struc ptr[5] = 0x0c; ptr[6] = 0x00; - if (frame->vic) { - ptr[7] = 0x1 << 5; /* video format */ - ptr[8] = frame->vic; - } else { + if (frame->s3d_struct != HDMI_3D_STRUCTURE_INVALID) { ptr[7] = 0x2 << 5; /* video format */ ptr[8] = (frame->s3d_struct & 0xf) << 4; if (frame->s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF) ptr[9] = (frame->s3d_ext_data & 0xf) << 4; + } else if (frame->vic) { + ptr[7] = 0x1 << 5; /* video format */ + ptr[8] = frame->vic; + } else { + ptr[7] = 0x0 << 5; /* video format */ } hdmi_infoframe_set_checksum(buffer, length); @@ -1165,7 +1170,7 @@ hdmi_vendor_any_infoframe_unpack(union h if (ptr[0] != HDMI_INFOFRAME_TYPE_VENDOR || ptr[1] != 1 || - (ptr[2] != 5 && ptr[2] != 6)) + (ptr[2] != 4 && ptr[2] != 5 && ptr[2] != 6)) return -EINVAL; length = ptr[2]; @@ -1193,16 +1198,22 @@ hdmi_vendor_any_infoframe_unpack(union h hvf->length = length; - if (hdmi_video_format == 0x1) { - hvf->vic = ptr[4]; - } else if (hdmi_video_format == 0x2) { + if (hdmi_video_format == 0x2) { + if (length != 5 && length != 6) + return -EINVAL; hvf->s3d_struct = ptr[4] >> 4; if (hvf->s3d_struct >= HDMI_3D_STRUCTURE_SIDE_BY_SIDE_HALF) { - if (length == 6) - hvf->s3d_ext_data = ptr[5] >> 4; - else + if (length != 6) return -EINVAL; + hvf->s3d_ext_data = ptr[5] >> 4; } + } else if (hdmi_video_format == 0x1) { + if (length != 5) + return -EINVAL; + hvf->vic = ptr[4]; + } else { + if (length != 4) + return -EINVAL; } return 0; Patches currently in stable-queue which might be from ville.syrjala(a)linux.intel.com are queue-4.15/drm-vblank-fix-vblank-timestamp-debugs.patch queue-4.15/video-hdmi-allow-empty-hdmi-infoframes.patch queue-4.15/drm-edid-set-eld-connector-type-in-drm_edid_to_eld.patch

6 years, 10 months

1
0
0 0

Patch "veth: set peer GSO values" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled veth: set peer GSO values to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: veth-set-peer-gso-values.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:08 CET 2018 From: Stephen Hemminger <stephen(a)networkplumber.org> Date: Thu, 7 Dec 2017 15:40:20 -0800 Subject: veth: set peer GSO values From: Stephen Hemminger <stephen(a)networkplumber.org> [ Upstream commit 72d24955b44a4039db54a1c252b5031969eeaac3 ] When new veth is created, and GSO values have been configured on one device, clone those values to the peer. For example: # ip link add dev vm1 gso_max_size 65530 type veth peer name vm2 This should create vm1 <--> vm2 with both having GSO maximum size set to 65530. Signed-off-by: Stephen Hemminger <sthemmin(a)microsoft.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/veth.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/net/veth.c +++ b/drivers/net/veth.c @@ -410,6 +410,9 @@ static int veth_newlink(struct net *src_ if (ifmp && (dev->ifindex != 0)) peer->ifindex = ifmp->ifi_index; + peer->gso_max_size = dev->gso_max_size; + peer->gso_max_segs = dev->gso_max_segs; + err = register_netdevice(peer); put_net(net); net = NULL; Patches currently in stable-queue which might be from stephen(a)networkplumber.org are queue-4.15/veth-set-peer-gso-values.patch

6 years, 10 months

1
0
0 0

Patch "userns: Don't fail follow_automount based on s_user_ns" has been added to the 4.15-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled userns: Don't fail follow_automount based on s_user_ns to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: userns-don-t-fail-follow_automount-based-on-s_user_ns.patch and it can be found in the queue-4.15 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Fri Mar 16 15:11:07 CET 2018 From: "Eric W. Biederman" <ebiederm(a)xmission.com> Date: Wed, 29 Nov 2017 17:29:20 -0600 Subject: userns: Don't fail follow_automount based on s_user_ns From: "Eric W. Biederman" <ebiederm(a)xmission.com> [ Upstream commit bbc3e471011417598e598707486f5d8814ec9c01 ] When vfs_submount was added the test to limit automounts from filesystems that with s_user_ns != &init_user_ns accidentially left in follow_automount. The test was never about any security concerns and was always about how do we implement this for filesystems whose s_user_ns != &init_user_ns. At the moment this check makes no difference as there are no filesystems that both set FS_USERNS_MOUNT and implement d_automount. Remove this check now while I am thinking about it so there will not be odd booby traps for someone who does want to make this combination work. vfs_submount still needs improvements to allow this combination to work, and vfs_submount contains a check that presents a warning. The autofs4 filesystem could be modified to set FS_USERNS_MOUNT and it would need not work on this code path, as userspace performs the mounts. Fixes: 93faccbbfa95 ("fs: Better permission checking for submounts") Fixes: aeaa4a79ff6a ("fs: Call d_automount with the filesystems creds") Acked-by: Ian Kent <raven(a)themaw.net> Signed-off-by: "Eric W. Biederman" <ebiederm(a)xmission.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/namei.c | 3 --- 1 file changed, 3 deletions(-) --- a/fs/namei.c +++ b/fs/namei.c @@ -1133,9 +1133,6 @@ static int follow_automount(struct path path->dentry->d_inode) return -EISDIR; - if (path->dentry->d_sb->s_user_ns != &init_user_ns) - return -EACCES; - nd->total_link_count++; if (nd->total_link_count >= 40) return -ELOOP; Patches currently in stable-queue which might be from ebiederm(a)xmission.com are queue-4.15/userns-don-t-fail-follow_automount-based-on-s_user_ns.patch

6 years, 10 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror March 2018