March 2018 - Linux-stable-mirror

Patch "s390/qeth: on channel error, reject further cmd requests" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled s390/qeth: on channel error, reject further cmd requests to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: s390-qeth-on-channel-error-reject-further-cmd-requests.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 29 08:53:48 CEST 2018 From: Julian Wiedmann <jwi(a)linux.vnet.ibm.com> Date: Tue, 20 Mar 2018 07:59:15 +0100 Subject: s390/qeth: on channel error, reject further cmd requests From: Julian Wiedmann <jwi(a)linux.vnet.ibm.com> [ Upstream commit a6c3d93963e4b333c764fde69802c3ea9eaa9d5c ] When the IRQ handler determines that one of the cmd IO channels has failed and schedules recovery, block any further cmd requests from being submitted. The request would inevitably stall, and prevent the recovery from making progress until the request times out. This sort of error was observed after Live Guest Relocation, where the pending IO on the READ channel intentionally gets terminated to kick-start recovery. Simultaneously the guest executed SIOCETHTOOL, triggering qeth to issue a QUERY CARD INFO command. The command then stalled in the inoperabel WRITE channel. Signed-off-by: Julian Wiedmann <jwi(a)linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/s390/net/qeth_core_main.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -1158,6 +1158,7 @@ static void qeth_irq(struct ccw_device * } rc = qeth_get_problem(cdev, irb); if (rc) { + card->read_or_write_problem = 1; qeth_clear_ipacmd_list(card); qeth_schedule_recovery(card); goto out; Patches currently in stable-queue which might be from jwi(a)linux.vnet.ibm.com are queue-3.18/s390-qeth-when-thread-completes-wake-up-all-waiters.patch queue-3.18/s390-qeth-lock-read-device-while-queueing-next-buffer.patch queue-3.18/net-iucv-free-memory-obtained-by-kzalloc.patch queue-3.18/s390-qeth-on-channel-error-reject-further-cmd-requests.patch queue-3.18/s390-qeth-free-netdevice-when-removing-a-card.patch

6 years, 9 months

1
0
0 0

Patch "netlink: avoid a double skb free in genlmsg_mcast()" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled netlink: avoid a double skb free in genlmsg_mcast() to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: netlink-avoid-a-double-skb-free-in-genlmsg_mcast.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 29 08:53:48 CEST 2018 From: Nicolas Dichtel <nicolas.dichtel(a)6wind.com> Date: Wed, 14 Mar 2018 21:10:23 +0100 Subject: netlink: avoid a double skb free in genlmsg_mcast() From: Nicolas Dichtel <nicolas.dichtel(a)6wind.com> [ Upstream commit 02a2385f37a7c6594c9d89b64c4a1451276f08eb ] nlmsg_multicast() consumes always the skb, thus the original skb must be freed only when this function is called with a clone. Fixes: cb9f7a9a5c96 ("netlink: ensure to loop over all netns in genlmsg_multicast_allns()") Reported-by: Ben Hutchings <ben.hutchings(a)codethink.co.uk> Signed-off-by: Nicolas Dichtel <nicolas.dichtel(a)6wind.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/netlink/genetlink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/net/netlink/genetlink.c +++ b/net/netlink/genetlink.c @@ -1083,7 +1083,7 @@ static int genlmsg_mcast(struct sk_buff if (!err) delivered = true; else if (err != -ESRCH) - goto error; + return err; return delivered ? 0 : -ESRCH; error: kfree_skb(skb); Patches currently in stable-queue which might be from nicolas.dichtel(a)6wind.com are queue-3.18/netlink-avoid-a-double-skb-free-in-genlmsg_mcast.patch

6 years, 9 months

1
0
0 0

Patch "s390/qeth: free netdevice when removing a card" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled s390/qeth: free netdevice when removing a card to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: s390-qeth-free-netdevice-when-removing-a-card.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 29 08:33:08 CEST 2018 From: Julian Wiedmann <jwi(a)linux.vnet.ibm.com> Date: Tue, 20 Mar 2018 07:59:12 +0100 Subject: s390/qeth: free netdevice when removing a card From: Julian Wiedmann <jwi(a)linux.vnet.ibm.com> [ Upstream commit 6be687395b3124f002a653c1a50b3260222b3cd7 ] On removal, a qeth card's netdevice is currently not properly freed because the call chain looks as follows: qeth_core_remove_device(card) lx_remove_device(card) unregister_netdev(card->dev) card->dev = NULL !!! qeth_core_free_card(card) if (card->dev) !!! free_netdev(card->dev) Fix it by free'ing the netdev straight after unregistering. This also fixes the sysfs-driven layer switch case (qeth_dev_layer2_store()), where the need to free the current netdevice was not considered at all. Note that free_netdev() takes care of the netif_napi_del() for us too. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <jwi(a)linux.vnet.ibm.com> Reviewed-by: Ursula Braun <ubraun(a)linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/s390/net/qeth_core_main.c | 2 -- drivers/s390/net/qeth_l2_main.c | 2 +- drivers/s390/net/qeth_l3_main.c | 2 +- 3 files changed, 2 insertions(+), 4 deletions(-) --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -4937,8 +4937,6 @@ static void qeth_core_free_card(struct q QETH_DBF_HEX(SETUP, 2, &card, sizeof(void *)); qeth_clean_channel(&card->read); qeth_clean_channel(&card->write); - if (card->dev) - free_netdev(card->dev); kfree(card->ip_tbd_list); qeth_free_qdio_buffers(card); unregister_service_level(&card->qeth_service_level); --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -922,8 +922,8 @@ static void qeth_l2_remove_device(struct qeth_l2_set_offline(cgdev); if (card->dev) { - netif_napi_del(&card->napi); unregister_netdev(card->dev); + free_netdev(card->dev); card->dev = NULL; } return; --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -3333,8 +3333,8 @@ static void qeth_l3_remove_device(struct qeth_l3_set_offline(cgdev); if (card->dev) { - netif_napi_del(&card->napi); unregister_netdev(card->dev); + free_netdev(card->dev); card->dev = NULL; } Patches currently in stable-queue which might be from jwi(a)linux.vnet.ibm.com are queue-3.18/s390-qeth-when-thread-completes-wake-up-all-waiters.patch queue-3.18/s390-qeth-lock-read-device-while-queueing-next-buffer.patch queue-3.18/net-iucv-free-memory-obtained-by-kzalloc.patch queue-3.18/s390-qeth-on-channel-error-reject-further-cmd-requests.patch queue-3.18/s390-qeth-free-netdevice-when-removing-a-card.patch

6 years, 9 months

1
0
0 0

Patch "net: fec: Fix unbalanced PM runtime calls" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: fec: Fix unbalanced PM runtime calls to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-fec-fix-unbalanced-pm-runtime-calls.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 29 08:53:48 CEST 2018 From: Florian Fainelli <f.fainelli(a)gmail.com> Date: Sun, 18 Mar 2018 12:49:51 -0700 Subject: net: fec: Fix unbalanced PM runtime calls From: Florian Fainelli <f.fainelli(a)gmail.com> [ Upstream commit a069215cf5985f3aa1bba550264907d6bd05c5f7 ] When unbinding/removing the driver, we will run into the following warnings: [ 259.655198] fec 400d1000.ethernet: 400d1000.ethernet supply phy not found, using dummy regulator [ 259.665065] fec 400d1000.ethernet: Unbalanced pm_runtime_enable! [ 259.672770] fec 400d1000.ethernet (unnamed net_device) (uninitialized): Invalid MAC address: 00:00:00:00:00:00 [ 259.683062] fec 400d1000.ethernet (unnamed net_device) (uninitialized): Using random MAC address: f2:3e:93:b7:29:c1 [ 259.696239] libphy: fec_enet_mii_bus: probed Avoid these warnings by balancing the runtime PM calls during fec_drv_remove(). Signed-off-by: Florian Fainelli <f.fainelli(a)gmail.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/freescale/fec_main.c | 2 ++ 1 file changed, 2 insertions(+) --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -3339,6 +3339,8 @@ fec_drv_remove(struct platform_device *p if (fep->reg_phy) regulator_disable(fep->reg_phy); fec_enet_clk_enable(ndev, false); + pm_runtime_put(&pdev->dev); + pm_runtime_disable(&pdev->dev); of_node_put(fep->phy_node); free_netdev(ndev); Patches currently in stable-queue which might be from f.fainelli(a)gmail.com are queue-3.18/net-fec-fix-unbalanced-pm-runtime-calls.patch

6 years, 9 months

1
0
0 0

Patch "net: Only honor ifindex in IP_PKTINFO if non-0" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: Only honor ifindex in IP_PKTINFO if non-0 to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-only-honor-ifindex-in-ip_pktinfo-if-non-0.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 29 08:53:48 CEST 2018 From: David Ahern <dsahern(a)gmail.com> Date: Fri, 16 Feb 2018 11:03:03 -0800 Subject: net: Only honor ifindex in IP_PKTINFO if non-0 From: David Ahern <dsahern(a)gmail.com> [ Upstream commit 2cbb4ea7de167b02ffa63e9cdfdb07a7e7094615 ] Only allow ifindex from IP_PKTINFO to override SO_BINDTODEVICE settings if the index is actually set in the message. Signed-off-by: David Ahern <dsahern(a)gmail.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv4/ip_sockglue.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) --- a/net/ipv4/ip_sockglue.c +++ b/net/ipv4/ip_sockglue.c @@ -206,7 +206,8 @@ int ip_cmsg_send(struct net *net, struct src_info = (struct in6_pktinfo *)CMSG_DATA(cmsg); if (!ipv6_addr_v4mapped(&src_info->ipi6_addr)) return -EINVAL; - ipc->oif = src_info->ipi6_ifindex; + if (src_info->ipi6_ifindex) + ipc->oif = src_info->ipi6_ifindex; ipc->addr = src_info->ipi6_addr.s6_addr32[3]; continue; } @@ -227,7 +228,8 @@ int ip_cmsg_send(struct net *net, struct if (cmsg->cmsg_len != CMSG_LEN(sizeof(struct in_pktinfo))) return -EINVAL; info = (struct in_pktinfo *)CMSG_DATA(cmsg); - ipc->oif = info->ipi_ifindex; + if (info->ipi_ifindex) + ipc->oif = info->ipi_ifindex; ipc->addr = info->ipi_spec_dst.s_addr; break; } Patches currently in stable-queue which might be from dsahern(a)gmail.com are queue-3.18/net-only-honor-ifindex-in-ip_pktinfo-if-non-0.patch

6 years, 9 months

1
0
0 0

Patch "net/iucv: Free memory obtained by kzalloc" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net/iucv: Free memory obtained by kzalloc to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-iucv-free-memory-obtained-by-kzalloc.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 29 08:53:48 CEST 2018 From: Arvind Yadav <arvind.yadav.cs(a)gmail.com> Date: Tue, 13 Mar 2018 16:50:06 +0100 Subject: net/iucv: Free memory obtained by kzalloc From: Arvind Yadav <arvind.yadav.cs(a)gmail.com> [ Upstream commit fa6a91e9b907231d2e38ea5ed89c537b3525df3d ] Free memory by calling put_device(), if afiucv_iucv_init is not successful. Signed-off-by: Arvind Yadav <arvind.yadav.cs(a)gmail.com> Reviewed-by: Cornelia Huck <cohuck(a)redhat.com> Signed-off-by: Ursula Braun <ursula.braun(a)de.ibm.com> Signed-off-by: Julian Wiedmann <jwi(a)linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/iucv/af_iucv.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) --- a/net/iucv/af_iucv.c +++ b/net/iucv/af_iucv.c @@ -2383,9 +2383,11 @@ static int afiucv_iucv_init(void) af_iucv_dev->driver = &af_iucv_driver; err = device_register(af_iucv_dev); if (err) - goto out_driver; + goto out_iucv_dev; return 0; +out_iucv_dev: + put_device(af_iucv_dev); out_driver: driver_unregister(&af_iucv_driver); out_iucv: Patches currently in stable-queue which might be from arvind.yadav.cs(a)gmail.com are queue-3.18/net-iucv-free-memory-obtained-by-kzalloc.patch

6 years, 9 months

1
0
0 0

Patch "net: ethernet: ti: cpsw: add check for in-band mode setting with RGMII PHY interface" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: ethernet: ti: cpsw: add check for in-band mode setting with RGMII PHY interface to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-ethernet-ti-cpsw-add-check-for-in-band-mode-setting-with-rgmii-phy-interface.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 29 08:53:48 CEST 2018 From: "SZ Lin (林上智)" <sz.lin(a)moxa.com> Date: Fri, 16 Mar 2018 00:56:01 +0800 Subject: net: ethernet: ti: cpsw: add check for in-band mode setting with RGMII PHY interface From: "SZ Lin (林上智)" <sz.lin(a)moxa.com> [ Upstream commit f9db50691db4a7d860fce985f080bb3fc23a7ede ] According to AM335x TRM[1] 14.3.6.2, AM437x TRM[2] 15.3.6.2 and DRA7 TRM[3] 24.11.4.8.7.3.3, in-band mode in EXT_EN(bit18) register is only available when PHY is configured in RGMII mode with 10Mbps speed. It will cause some networking issues without RGMII mode, such as carrier sense errors and low throughput. TI also mentioned this issue in their forum[4]. This patch adds the check mechanism for PHY interface with RGMII interface type, the in-band mode can only be set in RGMII mode with 10Mbps speed. References: [1]: https://www.ti.com/lit/ug/spruh73p/spruh73p.pdf [2]: http://www.ti.com/lit/ug/spruhl7h/spruhl7h.pdf [3]: http://www.ti.com/lit/ug/spruic2b/spruic2b.pdf [4]: https://e2e.ti.com/support/arm/sitara_arm/f/791/p/640765/2392155 Suggested-by: Holsety Chen (陳憲輝) <Holsety.Chen(a)moxa.com> Signed-off-by: SZ Lin (林上智) <sz.lin(a)moxa.com> Signed-off-by: Schuyler Patton <spatton(a)ti.com> Reviewed-by: Grygorii Strashko <grygorii.strashko(a)ti.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/ti/cpsw.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -872,7 +872,8 @@ static void _cpsw_adjust_link(struct cps /* set speed_in input in case RMII mode is used in 100Mbps */ if (phy->speed == 100) mac_control |= BIT(15); - else if (phy->speed == 10) + /* in band mode only works in 10Mbps RGMII mode */ + else if ((phy->speed == 10) && phy_interface_is_rgmii(phy)) mac_control |= BIT(18); /* In Band mode */ if (priv->rx_pause) Patches currently in stable-queue which might be from sz.lin(a)moxa.com are queue-3.18/net-ethernet-ti-cpsw-add-check-for-in-band-mode-setting-with-rgmii-phy-interface.patch

6 years, 9 months

1
0
0 0

Patch "l2tp: do not accept arbitrary sockets" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled l2tp: do not accept arbitrary sockets to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: l2tp-do-not-accept-arbitrary-sockets.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 29 08:53:48 CEST 2018 From: Eric Dumazet <edumazet(a)google.com> Date: Tue, 6 Mar 2018 07:54:53 -0800 Subject: l2tp: do not accept arbitrary sockets From: Eric Dumazet <edumazet(a)google.com> [ Upstream commit 17cfe79a65f98abe535261856c5aef14f306dff7 ] syzkaller found an issue caused by lack of sufficient checks in l2tp_tunnel_create() RAW sockets can not be considered as UDP ones for instance. In another patch, we shall replace all pr_err() by less intrusive pr_debug() so that syzkaller can find other bugs faster. Acked-by: Guillaume Nault <g.nault(a)alphalink.fr> Acked-by: James Chapman <jchapman(a)katalix.com> ================================================================== BUG: KASAN: slab-out-of-bounds in setup_udp_tunnel_sock+0x3ee/0x5f0 net/ipv4/udp_tunnel.c:69 dst_release: dst:00000000d53d0d0f refcnt:-1 Write of size 1 at addr ffff8801d013b798 by task syz-executor3/6242 CPU: 1 PID: 6242 Comm: syz-executor3 Not tainted 4.16.0-rc2+ #253 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x24d lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report+0x23b/0x360 mm/kasan/report.c:412 __asan_report_store1_noabort+0x17/0x20 mm/kasan/report.c:435 setup_udp_tunnel_sock+0x3ee/0x5f0 net/ipv4/udp_tunnel.c:69 l2tp_tunnel_create+0x1354/0x17f0 net/l2tp/l2tp_core.c:1596 pppol2tp_connect+0x14b1/0x1dd0 net/l2tp/l2tp_ppp.c:707 SYSC_connect+0x213/0x4a0 net/socket.c:1640 SyS_connect+0x24/0x30 net/socket.c:1621 do_syscall_64+0x280/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by: Eric Dumazet <edumazet(a)google.com> Reported-by: syzbot <syzkaller(a)googlegroups.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/l2tp/l2tp_core.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) --- a/net/l2tp/l2tp_core.c +++ b/net/l2tp/l2tp_core.c @@ -1517,9 +1517,14 @@ int l2tp_tunnel_create(struct net *net, encap = cfg->encap; /* Quick sanity checks */ + err = -EPROTONOSUPPORT; + if (sk->sk_type != SOCK_DGRAM) { + pr_debug("tunl %hu: fd %d wrong socket type\n", + tunnel_id, fd); + goto err; + } switch (encap) { case L2TP_ENCAPTYPE_UDP: - err = -EPROTONOSUPPORT; if (sk->sk_protocol != IPPROTO_UDP) { pr_err("tunl %hu: fd %d wrong protocol, got %d, expected %d\n", tunnel_id, fd, sk->sk_protocol, IPPROTO_UDP); @@ -1527,7 +1532,6 @@ int l2tp_tunnel_create(struct net *net, } break; case L2TP_ENCAPTYPE_IP: - err = -EPROTONOSUPPORT; if (sk->sk_protocol != IPPROTO_L2TP) { pr_err("tunl %hu: fd %d wrong protocol, got %d, expected %d\n", tunnel_id, fd, sk->sk_protocol, IPPROTO_L2TP); Patches currently in stable-queue which might be from edumazet(a)google.com are queue-3.18/ipv6-fix-access-to-non-linear-packet-in-ndisc_fill_redirect_hdr_option.patch queue-3.18/skbuff-fix-not-waking-applications-when-errors-are-enqueued.patch queue-3.18/l2tp-do-not-accept-arbitrary-sockets.patch

6 years, 9 months

1
0
0 0

Patch "net: ethernet: arc: Fix a potential memory leak if an optional regulator is deferred" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: ethernet: arc: Fix a potential memory leak if an optional regulator is deferred to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-ethernet-arc-fix-a-potential-memory-leak-if-an-optional-regulator-is-deferred.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 29 08:53:48 CEST 2018 From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Date: Sun, 18 Mar 2018 23:59:36 +0100 Subject: net: ethernet: arc: Fix a potential memory leak if an optional regulator is deferred From: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> [ Upstream commit 00777fac28ba3e126b9e63e789a613e8bd2cab25 ] If the optional regulator is deferred, we must release some resources. They will be re-allocated when the probe function will be called again. Fixes: 6eacf31139bf ("ethernet: arc: Add support for Rockchip SoC layer device tree bindings") Signed-off-by: Christophe JAILLET <christophe.jaillet(a)wanadoo.fr> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/arc/emac_rockchip.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) --- a/drivers/net/ethernet/arc/emac_rockchip.c +++ b/drivers/net/ethernet/arc/emac_rockchip.c @@ -150,8 +150,10 @@ static int emac_rockchip_probe(struct pl /* Optional regulator for PHY */ priv->regulator = devm_regulator_get_optional(dev, "phy"); if (IS_ERR(priv->regulator)) { - if (PTR_ERR(priv->regulator) == -EPROBE_DEFER) - return -EPROBE_DEFER; + if (PTR_ERR(priv->regulator) == -EPROBE_DEFER) { + err = -EPROBE_DEFER; + goto out_clk_disable; + } dev_err(dev, "no regulator found\n"); priv->regulator = NULL; } Patches currently in stable-queue which might be from christophe.jaillet(a)wanadoo.fr are queue-3.18/net-ethernet-arc-fix-a-potential-memory-leak-if-an-optional-regulator-is-deferred.patch

6 years, 9 months

1
0
0 0

Patch "ipv6: fix access to non-linear packet in ndisc_fill_redirect_hdr_option()" has been added to the 3.18-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ipv6: fix access to non-linear packet in ndisc_fill_redirect_hdr_option() to the 3.18-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ipv6-fix-access-to-non-linear-packet-in-ndisc_fill_redirect_hdr_option.patch and it can be found in the queue-3.18 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 29 08:53:48 CEST 2018 From: Lorenzo Bianconi <lorenzo.bianconi(a)redhat.com> Date: Thu, 8 Mar 2018 17:00:02 +0100 Subject: ipv6: fix access to non-linear packet in ndisc_fill_redirect_hdr_option() From: Lorenzo Bianconi <lorenzo.bianconi(a)redhat.com> [ Upstream commit 9f62c15f28b0d1d746734666d88a79f08ba1e43e ] Fix the following slab-out-of-bounds kasan report in ndisc_fill_redirect_hdr_option when the incoming ipv6 packet is not linear and the accessed data are not in the linear data region of orig_skb. [ 1503.122508] ================================================================== [ 1503.122832] BUG: KASAN: slab-out-of-bounds in ndisc_send_redirect+0x94e/0x990 [ 1503.123036] Read of size 1184 at addr ffff8800298ab6b0 by task netperf/1932 [ 1503.123220] CPU: 0 PID: 1932 Comm: netperf Not tainted 4.16.0-rc2+ #124 [ 1503.123347] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-2.fc27 04/01/2014 [ 1503.123527] Call Trace: [ 1503.123579] <IRQ> [ 1503.123638] print_address_description+0x6e/0x280 [ 1503.123849] kasan_report+0x233/0x350 [ 1503.123946] memcpy+0x1f/0x50 [ 1503.124037] ndisc_send_redirect+0x94e/0x990 [ 1503.125150] ip6_forward+0x1242/0x13b0 [...] [ 1503.153890] Allocated by task 1932: [ 1503.153982] kasan_kmalloc+0x9f/0xd0 [ 1503.154074] __kmalloc_track_caller+0xb5/0x160 [ 1503.154198] __kmalloc_reserve.isra.41+0x24/0x70 [ 1503.154324] __alloc_skb+0x130/0x3e0 [ 1503.154415] sctp_packet_transmit+0x21a/0x1810 [ 1503.154533] sctp_outq_flush+0xc14/0x1db0 [ 1503.154624] sctp_do_sm+0x34e/0x2740 [ 1503.154715] sctp_primitive_SEND+0x57/0x70 [ 1503.154807] sctp_sendmsg+0xaa6/0x1b10 [ 1503.154897] sock_sendmsg+0x68/0x80 [ 1503.154987] ___sys_sendmsg+0x431/0x4b0 [ 1503.155078] __sys_sendmsg+0xa4/0x130 [ 1503.155168] do_syscall_64+0x171/0x3f0 [ 1503.155259] entry_SYSCALL_64_after_hwframe+0x42/0xb7 [ 1503.155436] Freed by task 1932: [ 1503.155527] __kasan_slab_free+0x134/0x180 [ 1503.155618] kfree+0xbc/0x180 [ 1503.155709] skb_release_data+0x27f/0x2c0 [ 1503.155800] consume_skb+0x94/0xe0 [ 1503.155889] sctp_chunk_put+0x1aa/0x1f0 [ 1503.155979] sctp_inq_pop+0x2f8/0x6e0 [ 1503.156070] sctp_assoc_bh_rcv+0x6a/0x230 [ 1503.156164] sctp_inq_push+0x117/0x150 [ 1503.156255] sctp_backlog_rcv+0xdf/0x4a0 [ 1503.156346] __release_sock+0x142/0x250 [ 1503.156436] release_sock+0x80/0x180 [ 1503.156526] sctp_sendmsg+0xbb0/0x1b10 [ 1503.156617] sock_sendmsg+0x68/0x80 [ 1503.156708] ___sys_sendmsg+0x431/0x4b0 [ 1503.156799] __sys_sendmsg+0xa4/0x130 [ 1503.156889] do_syscall_64+0x171/0x3f0 [ 1503.156980] entry_SYSCALL_64_after_hwframe+0x42/0xb7 [ 1503.157158] The buggy address belongs to the object at ffff8800298ab600 which belongs to the cache kmalloc-1024 of size 1024 [ 1503.157444] The buggy address is located 176 bytes inside of 1024-byte region [ffff8800298ab600, ffff8800298aba00) [ 1503.157702] The buggy address belongs to the page: [ 1503.157820] page:ffffea0000a62a00 count:1 mapcount:0 mapping:0000000000000000 index:0x0 compound_mapcount: 0 [ 1503.158053] flags: 0x4000000000008100(slab|head) [ 1503.158171] raw: 4000000000008100 0000000000000000 0000000000000000 00000001800e000e [ 1503.158350] raw: dead000000000100 dead000000000200 ffff880036002600 0000000000000000 [ 1503.158523] page dumped because: kasan: bad access detected [ 1503.158698] Memory state around the buggy address: [ 1503.158816] ffff8800298ab900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1503.158988] ffff8800298ab980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1503.159165] >ffff8800298aba00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 1503.159338] ^ [ 1503.159436] ffff8800298aba80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 1503.159610] ffff8800298abb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 1503.159785] ================================================================== [ 1503.159964] Disabling lock debugging due to kernel taint The test scenario to trigger the issue consists of 4 devices: - H0: data sender, connected to LAN0 - H1: data receiver, connected to LAN1 - GW0 and GW1: routers between LAN0 and LAN1. Both of them have an ethernet connection on LAN0 and LAN1 On H{0,1} set GW0 as default gateway while on GW0 set GW1 as next hop for data from LAN0 to LAN1. Moreover create an ip6ip6 tunnel between H0 and H1 and send 3 concurrent data streams (TCP/UDP/SCTP) from H0 to H1 through ip6ip6 tunnel (send buffer size is set to 16K). While data streams are active flush the route cache on HA multiple times. I have not been able to identify a given commit that introduced the issue since, using the reproducer described above, the kasan report has been triggered from 4.14 and I have not gone back further. Reported-by: Jianlin Shi <jishi(a)redhat.com> Reviewed-by: Stefano Brivio <sbrivio(a)redhat.com> Reviewed-by: Eric Dumazet <edumazet(a)google.com> Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi(a)redhat.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv6/ndisc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -1443,7 +1443,8 @@ static void ndisc_fill_redirect_hdr_opti *(opt++) = (rd_len >> 3); opt += 6; - memcpy(opt, ipv6_hdr(orig_skb), rd_len - 8); + skb_copy_bits(orig_skb, skb_network_offset(orig_skb), opt, + rd_len - 8); } void ndisc_send_redirect(struct sk_buff *skb, const struct in6_addr *target) Patches currently in stable-queue which might be from lorenzo.bianconi(a)redhat.com are queue-3.18/ipv6-fix-access-to-non-linear-packet-in-ndisc_fill_redirect_hdr_option.patch

6 years, 9 months

1
0
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror March 2018