March 2018 - Linux-stable-mirror

Patch "ip6_vti: adjust vti mtu according to mtu of lower device" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ip6_vti: adjust vti mtu according to mtu of lower device to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ip6_vti-adjust-vti-mtu-according-to-mtu-of-lower-device.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:26:48 CET 2018 From: Alexey Kodanev <alexey.kodanev(a)oracle.com> Date: Tue, 19 Dec 2017 16:59:21 +0300 Subject: ip6_vti: adjust vti mtu according to mtu of lower device From: Alexey Kodanev <alexey.kodanev(a)oracle.com> [ Upstream commit 53c81e95df1793933f87748d36070a721f6cb287 ] LTP/udp6_ipsec_vti tests fail when sending large UDP datagrams over ip6_vti that require fragmentation and the underlying device has an MTU smaller than 1500 plus some extra space for headers. This happens because ip6_vti, by default, sets MTU to ETH_DATA_LEN and not updating it depending on a destination address or link parameter. Further attempts to send UDP packets may succeed because pmtu gets updated on ICMPV6_PKT_TOOBIG in vti6_err(). In case the lower device has larger MTU size, e.g. 9000, ip6_vti works but not using the possible maximum size, output packets have 1500 limit. The above cases require manual MTU setup after ip6_vti creation. However ip_vti already updates MTU based on lower device with ip_tunnel_bind_dev(). Here is the example when the lower device MTU is set to 9000: # ip a sh ltp_ns_veth2 ltp_ns_veth2@if7: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 ... inet 10.0.0.2/24 scope global ltp_ns_veth2 inet6 fd00::2/64 scope global # ip li add vti6 type vti6 local fd00::2 remote fd00::1 # ip li show vti6 vti6@NONE: <POINTOPOINT,NOARP> mtu 1500 ... link/tunnel6 fd00::2 peer fd00::1 After the patch: # ip li add vti6 type vti6 local fd00::2 remote fd00::1 # ip li show vti6 vti6@NONE: <POINTOPOINT,NOARP> mtu 8832 ... link/tunnel6 fd00::2 peer fd00::1 Reported-by: Petr Vorel <pvorel(a)suse.cz> Signed-off-by: Alexey Kodanev <alexey.kodanev(a)oracle.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/ipv6/ip6_vti.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) --- a/net/ipv6/ip6_vti.c +++ b/net/ipv6/ip6_vti.c @@ -626,6 +626,7 @@ static void vti6_link_config(struct ip6_ { struct net_device *dev = t->dev; struct __ip6_tnl_parm *p = &t->parms; + struct net_device *tdev = NULL; memcpy(dev->dev_addr, &p->laddr, sizeof(struct in6_addr)); memcpy(dev->broadcast, &p->raddr, sizeof(struct in6_addr)); @@ -638,6 +639,25 @@ static void vti6_link_config(struct ip6_ dev->flags |= IFF_POINTOPOINT; else dev->flags &= ~IFF_POINTOPOINT; + + if (p->flags & IP6_TNL_F_CAP_XMIT) { + int strict = (ipv6_addr_type(&p->raddr) & + (IPV6_ADDR_MULTICAST | IPV6_ADDR_LINKLOCAL)); + struct rt6_info *rt = rt6_lookup(t->net, + &p->raddr, &p->laddr, + p->link, strict); + + if (rt) + tdev = rt->dst.dev; + ip6_rt_put(rt); + } + + if (!tdev && p->link) + tdev = __dev_get_by_index(t->net, p->link); + + if (tdev) + dev->mtu = max_t(int, tdev->mtu - dev->hard_header_len, + IPV6_MIN_MTU); } /** Patches currently in stable-queue which might be from alexey.kodanev(a)oracle.com are queue-4.14/ip6_vti-adjust-vti-mtu-according-to-mtu-of-lower-device.patch

6 years, 9 months

1
0
0 0

Patch "iommu/vt-d: clean up pr_irq if request_threaded_irq fails" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled iommu/vt-d: clean up pr_irq if request_threaded_irq fails to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: iommu-vt-d-clean-up-pr_irq-if-request_threaded_irq-fails.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:26:48 CET 2018 From: Jerry Snitselaar <jsnitsel(a)redhat.com> Date: Wed, 20 Dec 2017 09:48:56 -0700 Subject: iommu/vt-d: clean up pr_irq if request_threaded_irq fails From: Jerry Snitselaar <jsnitsel(a)redhat.com> [ Upstream commit 72d548113881dd32bf7f0b221d031e6586468437 ] It is unlikely request_threaded_irq will fail, but if it does for some reason we should clear iommu->pr_irq in the error path. Also intel_svm_finish_prq shouldn't try to clean up the page request interrupt if pr_irq is 0. Without these, if request_threaded_irq were to fail the following occurs: fail with no fixes: [ 0.683147] ------------[ cut here ]------------ [ 0.683148] NULL pointer, cannot free irq [ 0.683158] WARNING: CPU: 1 PID: 1 at kernel/irq/irqdomain.c:1632 irq_domain_free_irqs+0x126/0x140 [ 0.683160] Modules linked in: [ 0.683163] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2 #3 [ 0.683165] Hardware name: /NUC7i3BNB, BIOS BNKBL357.86A.0036.2017.0105.1112 01/05/2017 [ 0.683168] RIP: 0010:irq_domain_free_irqs+0x126/0x140 [ 0.683169] RSP: 0000:ffffc90000037ce8 EFLAGS: 00010292 [ 0.683171] RAX: 000000000000001d RBX: ffff880276283c00 RCX: ffffffff81c5e5e8 [ 0.683172] RDX: 0000000000000001 RSI: 0000000000000096 RDI: 0000000000000246 [ 0.683174] RBP: ffff880276283c00 R08: 0000000000000000 R09: 000000000000023c [ 0.683175] R10: 0000000000000007 R11: 0000000000000000 R12: 000000000000007a [ 0.683176] R13: 0000000000000001 R14: 0000000000000000 R15: 0000010010000000 [ 0.683178] FS: 0000000000000000(0000) GS:ffff88027ec80000(0000) knlGS:0000000000000000 [ 0.683180] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.683181] CR2: 0000000000000000 CR3: 0000000001c09001 CR4: 00000000003606e0 [ 0.683182] Call Trace: [ 0.683189] intel_svm_finish_prq+0x3c/0x60 [ 0.683191] free_dmar_iommu+0x1ac/0x1b0 [ 0.683195] init_dmars+0xaaa/0xaea [ 0.683200] ? klist_next+0x19/0xc0 [ 0.683203] ? pci_do_find_bus+0x50/0x50 [ 0.683205] ? pci_get_dev_by_id+0x52/0x70 [ 0.683208] intel_iommu_init+0x498/0x5c7 [ 0.683211] pci_iommu_init+0x13/0x3c [ 0.683214] ? e820__memblock_setup+0x61/0x61 [ 0.683217] do_one_initcall+0x4d/0x1a0 [ 0.683220] kernel_init_freeable+0x186/0x20e [ 0.683222] ? set_debug_rodata+0x11/0x11 [ 0.683225] ? rest_init+0xb0/0xb0 [ 0.683226] kernel_init+0xa/0xff [ 0.683229] ret_from_fork+0x1f/0x30 [ 0.683259] Code: 89 ee 44 89 e7 e8 3b e8 ff ff 5b 5d 44 89 e7 44 89 ee 41 5c 41 5d 41 5e e9 a8 84 ff ff 48 c7 c7 a8 71 a7 81 31 c0 e8 6a d3 f9 ff <0f> ff 5b 5d 41 5c 41 5d 41 5 e c3 0f 1f 44 00 00 66 2e 0f 1f 84 [ 0.683285] ---[ end trace f7650e42792627ca ]--- with iommu->pr_irq = 0, but no check in intel_svm_finish_prq: [ 0.669561] ------------[ cut here ]------------ [ 0.669563] Trying to free already-free IRQ 0 [ 0.669573] WARNING: CPU: 3 PID: 1 at kernel/irq/manage.c:1546 __free_irq+0xa4/0x2c0 [ 0.669574] Modules linked in: [ 0.669577] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc2 #4 [ 0.669579] Hardware name: /NUC7i3BNB, BIOS BNKBL357.86A.0036.2017.0105.1112 01/05/2017 [ 0.669581] RIP: 0010:__free_irq+0xa4/0x2c0 [ 0.669582] RSP: 0000:ffffc90000037cc0 EFLAGS: 00010082 [ 0.669584] RAX: 0000000000000021 RBX: 0000000000000000 RCX: ffffffff81c5e5e8 [ 0.669585] RDX: 0000000000000001 RSI: 0000000000000086 RDI: 0000000000000046 [ 0.669587] RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000023c [ 0.669588] R10: 0000000000000007 R11: 0000000000000000 R12: ffff880276253960 [ 0.669589] R13: ffff8802762538a4 R14: ffff880276253800 R15: ffff880276283600 [ 0.669593] FS: 0000000000000000(0000) GS:ffff88027ed80000(0000) knlGS:0000000000000000 [ 0.669594] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 0.669596] CR2: 0000000000000000 CR3: 0000000001c09001 CR4: 00000000003606e0 [ 0.669602] Call Trace: [ 0.669616] free_irq+0x30/0x60 [ 0.669620] intel_svm_finish_prq+0x34/0x60 [ 0.669623] free_dmar_iommu+0x1ac/0x1b0 [ 0.669627] init_dmars+0xaaa/0xaea [ 0.669631] ? klist_next+0x19/0xc0 [ 0.669634] ? pci_do_find_bus+0x50/0x50 [ 0.669637] ? pci_get_dev_by_id+0x52/0x70 [ 0.669639] intel_iommu_init+0x498/0x5c7 [ 0.669642] pci_iommu_init+0x13/0x3c [ 0.669645] ? e820__memblock_setup+0x61/0x61 [ 0.669648] do_one_initcall+0x4d/0x1a0 [ 0.669651] kernel_init_freeable+0x186/0x20e [ 0.669653] ? set_debug_rodata+0x11/0x11 [ 0.669656] ? rest_init+0xb0/0xb0 [ 0.669658] kernel_init+0xa/0xff [ 0.669661] ret_from_fork+0x1f/0x30 [ 0.669662] Code: 7a 08 75 0e e9 c3 01 00 00 4c 39 7b 08 74 57 48 89 da 48 8b 5a 18 48 85 db 75 ee 89 ee 48 c7 c7 78 67 a7 81 31 c0 e8 4c 37 fa ff <0f> ff 48 8b 34 24 4c 89 ef e 8 0e 4c 68 00 49 8b 46 40 48 8b 80 [ 0.669688] ---[ end trace 58a470248700f2fc ]--- Cc: Alex Williamson <alex.williamson(a)redhat.com> Cc: Joerg Roedel <joro(a)8bytes.org> Cc: Ashok Raj <ashok.raj(a)intel.com> Signed-off-by: Jerry Snitselaar <jsnitsel(a)redhat.com> Reviewed-by: Ashok Raj <ashok.raj(a)intel.com> Signed-off-by: Alex Williamson <alex.williamson(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/iommu/intel-svm.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) --- a/drivers/iommu/intel-svm.c +++ b/drivers/iommu/intel-svm.c @@ -129,6 +129,7 @@ int intel_svm_enable_prq(struct intel_io pr_err("IOMMU: %s: Failed to request IRQ for page request queue\n", iommu->name); dmar_free_hwirq(irq); + iommu->pr_irq = 0; goto err; } dmar_writeq(iommu->reg + DMAR_PQH_REG, 0ULL); @@ -144,9 +145,11 @@ int intel_svm_finish_prq(struct intel_io dmar_writeq(iommu->reg + DMAR_PQT_REG, 0ULL); dmar_writeq(iommu->reg + DMAR_PQA_REG, 0ULL); - free_irq(iommu->pr_irq, iommu); - dmar_free_hwirq(iommu->pr_irq); - iommu->pr_irq = 0; + if (iommu->pr_irq) { + free_irq(iommu->pr_irq, iommu); + dmar_free_hwirq(iommu->pr_irq); + iommu->pr_irq = 0; + } free_pages((unsigned long)iommu->prq, PRQ_ORDER); iommu->prq = NULL; Patches currently in stable-queue which might be from jsnitsel(a)redhat.com are queue-4.14/iommu-vt-d-clean-up-pr_irq-if-request_threaded_irq-fails.patch

6 years, 9 months

1
0
0 0

Patch "IB/umem: Fix use of npages/nmap fields" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled IB/umem: Fix use of npages/nmap fields to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ib-umem-fix-use-of-npages-nmap-fields.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:26:48 CET 2018 From: Artemy Kovalyov <artemyko(a)mellanox.com> Date: Tue, 14 Nov 2017 14:51:59 +0200 Subject: IB/umem: Fix use of npages/nmap fields From: Artemy Kovalyov <artemyko(a)mellanox.com> [ Upstream commit edf1a84fe37c51290e2c88154ecaf48dadff3d27 ] In ib_umem structure npages holds original number of sg entries, while nmap is number of DMA blocks returned by dma_map_sg. Fixes: c5d76f130b28 ('IB/core: Add umem function to read data from user-space') Signed-off-by: Artemy Kovalyov <artemyko(a)mellanox.com> Signed-off-by: Leon Romanovsky <leon(a)kernel.org> Signed-off-by: Jason Gunthorpe <jgg(a)mellanox.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/infiniband/core/umem.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/infiniband/core/umem.c +++ b/drivers/infiniband/core/umem.c @@ -352,7 +352,7 @@ int ib_umem_copy_from(void *dst, struct return -EINVAL; } - ret = sg_pcopy_to_buffer(umem->sg_head.sgl, umem->nmap, dst, length, + ret = sg_pcopy_to_buffer(umem->sg_head.sgl, umem->npages, dst, length, offset + ib_umem_offset(umem)); if (ret < 0) Patches currently in stable-queue which might be from artemyko(a)mellanox.com are queue-4.14/ib-umem-fix-use-of-npages-nmap-fields.patch

6 years, 9 months

1
0
0 0

Patch "IB/ipoib: Avoid memory leak if the SA returns a different DGID" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled IB/ipoib: Avoid memory leak if the SA returns a different DGID to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ib-ipoib-avoid-memory-leak-if-the-sa-returns-a-different-dgid.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:26:48 CET 2018 From: Erez Shitrit <erezsh(a)mellanox.com> Date: Tue, 14 Nov 2017 14:51:53 +0200 Subject: IB/ipoib: Avoid memory leak if the SA returns a different DGID From: Erez Shitrit <erezsh(a)mellanox.com> [ Upstream commit 439000892ee17a9c92f1e4297818790ef8bb4ced ] The ipoib path database is organized around DGIDs from the LLADDR, but the SA is free to return a different GID when asked for path. This causes a bug because the SA's modified DGID is copied into the database key, even though it is no longer the correct lookup key, causing a memory leak and other malfunctions. Ensure the database key does not change after the SA query completes. Demonstration of the bug is as follows ipoib wants to send to GID fe80:0000:0000:0000:0002:c903:00ef:5ee2, it creates new record in the DB with that gid as a key, and issues a new request to the SM. Now, the SM from some reason returns path-record with other SGID (for example, 2001:0000:0000:0000:0002:c903:00ef:5ee2 that contains the local subnet prefix) now ipoib will overwrite the current entry with the new one, and if new request to the original GID arrives ipoib will not find it in the DB (was overwritten) and will create new record that in its turn will also be overwritten by the response from the SM, and so on till the driver eats all the device memory. Signed-off-by: Erez Shitrit <erezsh(a)mellanox.com> Signed-off-by: Leon Romanovsky <leon(a)kernel.org> Signed-off-by: Jason Gunthorpe <jgg(a)mellanox.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/infiniband/ulp/ipoib/ipoib_main.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -776,6 +776,22 @@ static void path_rec_completion(int stat spin_lock_irqsave(&priv->lock, flags); if (!IS_ERR_OR_NULL(ah)) { + /* + * pathrec.dgid is used as the database key from the LLADDR, + * it must remain unchanged even if the SA returns a different + * GID to use in the AH. + */ + if (memcmp(pathrec->dgid.raw, path->pathrec.dgid.raw, + sizeof(union ib_gid))) { + ipoib_dbg( + priv, + "%s got PathRec for gid %pI6 while asked for %pI6\n", + dev->name, pathrec->dgid.raw, + path->pathrec.dgid.raw); + memcpy(pathrec->dgid.raw, path->pathrec.dgid.raw, + sizeof(union ib_gid)); + } + path->pathrec = *pathrec; old_ah = path->ah; Patches currently in stable-queue which might be from erezsh(a)mellanox.com are queue-4.14/ib-ipoib-avoid-memory-leak-if-the-sa-returns-a-different-dgid.patch

6 years, 9 months

1
0
0 0

Patch "hv_netvsc: Fix the TX/RX buffer default sizes" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled hv_netvsc: Fix the TX/RX buffer default sizes to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: hv_netvsc-fix-the-tx-rx-buffer-default-sizes.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:26:48 CET 2018 From: Haiyang Zhang <haiyangz(a)microsoft.com> Date: Mon, 11 Dec 2017 08:56:58 -0800 Subject: hv_netvsc: Fix the TX/RX buffer default sizes From: Haiyang Zhang <haiyangz(a)microsoft.com> [ Upstream commit 41f61db2cd24d5ad802386719cccde1479aa82a6 ] The values were not computed correctly. There are no significant visible impact, though. The intended size of RX buffer is 16 MB, and the default slot size is 1728. So, NETVSC_DEFAULT_RX should be 16*1024*1024 / 1728 = 9709. The intended size of TX buffer is 1 MB, and the slot size is 6144. So, NETVSC_DEFAULT_TX should be 1024*1024 / 6144 = 170. The patch puts the formula directly into the macro, and moves them to hyperv_net.h, together with related macros. Fixes: 5023a6db73196 ("netvsc: increase default receive buffer size") Signed-off-by: Haiyang Zhang <haiyangz(a)microsoft.com> Signed-off-by: Stephen Hemminger <sthemmin(a)microsoft.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/hyperv/hyperv_net.h | 13 ++++++++++++- drivers/net/hyperv/netvsc_drv.c | 4 ---- 2 files changed, 12 insertions(+), 5 deletions(-) --- a/drivers/net/hyperv/hyperv_net.h +++ b/drivers/net/hyperv/hyperv_net.h @@ -638,13 +638,24 @@ struct nvsp_message { /* Max buffer sizes allowed by a host */ #define NETVSC_RECEIVE_BUFFER_SIZE (1024 * 1024 * 31) /* 31MB */ #define NETVSC_RECEIVE_BUFFER_SIZE_LEGACY (1024 * 1024 * 15) /* 15MB */ -#define NETVSC_SEND_BUFFER_SIZE (1024 * 1024 * 15) /* 15MB */ +#define NETVSC_RECEIVE_BUFFER_DEFAULT (1024 * 1024 * 16) + +#define NETVSC_SEND_BUFFER_SIZE (1024 * 1024 * 15) /* 15MB */ +#define NETVSC_SEND_BUFFER_DEFAULT (1024 * 1024) #define NETVSC_INVALID_INDEX -1 #define NETVSC_SEND_SECTION_SIZE 6144 #define NETVSC_RECV_SECTION_SIZE 1728 +/* Default size of TX buf: 1MB, RX buf: 16MB */ +#define NETVSC_MIN_TX_SECTIONS 10 +#define NETVSC_DEFAULT_TX (NETVSC_SEND_BUFFER_DEFAULT \ + / NETVSC_SEND_SECTION_SIZE) +#define NETVSC_MIN_RX_SECTIONS 10 +#define NETVSC_DEFAULT_RX (NETVSC_RECEIVE_BUFFER_DEFAULT \ + / NETVSC_RECV_SECTION_SIZE) + #define NETVSC_RECEIVE_BUFFER_ID 0xcafe #define NETVSC_SEND_BUFFER_ID 0 --- a/drivers/net/hyperv/netvsc_drv.c +++ b/drivers/net/hyperv/netvsc_drv.c @@ -46,10 +46,6 @@ #include "hyperv_net.h" #define RING_SIZE_MIN 64 -#define NETVSC_MIN_TX_SECTIONS 10 -#define NETVSC_DEFAULT_TX 192 /* ~1M */ -#define NETVSC_MIN_RX_SECTIONS 10 /* ~64K */ -#define NETVSC_DEFAULT_RX 10485 /* Max ~16M */ #define LINKCHANGE_INT (2 * HZ) #define VF_TAKEOVER_INT (HZ / 10) Patches currently in stable-queue which might be from haiyangz(a)microsoft.com are queue-4.14/hv_netvsc-fix-the-tx-rx-buffer-default-sizes.patch queue-4.14/hv_netvsc-fix-the-receive-buffer-size-limit.patch

6 years, 9 months

1
0
0 0

Patch "hv_netvsc: Fix the receive buffer size limit" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled hv_netvsc: Fix the receive buffer size limit to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: hv_netvsc-fix-the-receive-buffer-size-limit.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:26:48 CET 2018 From: Haiyang Zhang <haiyangz(a)microsoft.com> Date: Mon, 11 Dec 2017 08:56:57 -0800 Subject: hv_netvsc: Fix the receive buffer size limit From: Haiyang Zhang <haiyangz(a)microsoft.com> [ Upstream commit 11b2b653102571ac791885324371d9a1a17b900e ] The max should be 31 MB on host with NVSP version > 2. On legacy hosts (NVSP version <=2) only 15 MB receive buffer is allowed, otherwise the buffer request will be rejected by the host, resulting vNIC not coming up. The NVSP version is only available after negotiation. So, we add the limit checking for legacy hosts in netvsc_init_buf(). Fixes: 5023a6db73196 ("netvsc: increase default receive buffer size") Signed-off-by: Haiyang Zhang <haiyangz(a)microsoft.com> Signed-off-by: Stephen Hemminger <sthemmin(a)microsoft.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/hyperv/hyperv_net.h | 6 ++++-- drivers/net/hyperv/netvsc.c | 5 +++++ 2 files changed, 9 insertions(+), 2 deletions(-) --- a/drivers/net/hyperv/hyperv_net.h +++ b/drivers/net/hyperv/hyperv_net.h @@ -635,9 +635,11 @@ struct nvsp_message { #define NETVSC_MTU 65535 #define NETVSC_MTU_MIN ETH_MIN_MTU -#define NETVSC_RECEIVE_BUFFER_SIZE (1024*1024*16) /* 16MB */ -#define NETVSC_RECEIVE_BUFFER_SIZE_LEGACY (1024*1024*15) /* 15MB */ +/* Max buffer sizes allowed by a host */ +#define NETVSC_RECEIVE_BUFFER_SIZE (1024 * 1024 * 31) /* 31MB */ +#define NETVSC_RECEIVE_BUFFER_SIZE_LEGACY (1024 * 1024 * 15) /* 15MB */ #define NETVSC_SEND_BUFFER_SIZE (1024 * 1024 * 15) /* 15MB */ + #define NETVSC_INVALID_INDEX -1 #define NETVSC_SEND_SECTION_SIZE 6144 --- a/drivers/net/hyperv/netvsc.c +++ b/drivers/net/hyperv/netvsc.c @@ -262,6 +262,11 @@ static int netvsc_init_buf(struct hv_dev buf_size = device_info->recv_sections * device_info->recv_section_size; buf_size = roundup(buf_size, PAGE_SIZE); + /* Legacy hosts only allow smaller receive buffer */ + if (net_device->nvsp_version <= NVSP_PROTOCOL_VERSION_2) + buf_size = min_t(unsigned int, buf_size, + NETVSC_RECEIVE_BUFFER_SIZE_LEGACY); + net_device->recv_buf = vzalloc(buf_size); if (!net_device->recv_buf) { netdev_err(ndev, Patches currently in stable-queue which might be from haiyangz(a)microsoft.com are queue-4.14/hv_netvsc-fix-the-tx-rx-buffer-default-sizes.patch queue-4.14/hv_netvsc-fix-the-receive-buffer-size-limit.patch

6 years, 9 months

1
0
0 0

Patch "drm/tilcdc: ensure nonatomic iowrite64 is not used" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled drm/tilcdc: ensure nonatomic iowrite64 is not used to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drm-tilcdc-ensure-nonatomic-iowrite64-is-not-used.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:26:48 CET 2018 From: Logan Gunthorpe <logang(a)deltatee.com> Date: Tue, 5 Dec 2017 16:30:51 -0700 Subject: drm/tilcdc: ensure nonatomic iowrite64 is not used From: Logan Gunthorpe <logang(a)deltatee.com> [ Upstream commit 4e5ca2d930aa8714400aedf4bf1dc959cb04280f ] Add a check to ensure iowrite64 is only used if it is atomic. It was decided in [1] that the tilcdc driver should not be using an atomic operation (so it was left out of this patchset). However, it turns out that through the drm code, a nonatomic header is actually included: include/linux/io-64-nonatomic-lo-hi.h is included from include/drm/drm_os_linux.h:9:0, from include/drm/drmP.h:74, from include/drm/drm_modeset_helper.h:26, from include/drm/drm_atomic_helper.h:33, from drivers/gpu/drm/tilcdc/tilcdc_crtc.c:19: And thus, without this change, this patchset would inadvertantly change the behaviour of the tilcdc driver. [1] lkml.kernel.org/r/CAK8P3a2HhO_zCnsTzq7hmWSz5La5Thu19FWZpun16iMnyyNreQ@mail.… Signed-off-by: Logan Gunthorpe <logang(a)deltatee.com> Reviewed-by: Andy Shevchenko <andy.shevchenko(a)gmail.com> Cc: Jyri Sarha <jsarha(a)ti.com> Cc: Arnd Bergmann <arnd(a)arndb.de> Cc: Tomi Valkeinen <tomi.valkeinen(a)ti.com> Cc: David Airlie <airlied(a)linux.ie> Signed-off-by: Jyri Sarha <jsarha(a)ti.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpu/drm/tilcdc/tilcdc_regs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/gpu/drm/tilcdc/tilcdc_regs.h +++ b/drivers/gpu/drm/tilcdc/tilcdc_regs.h @@ -133,7 +133,7 @@ static inline void tilcdc_write64(struct struct tilcdc_drm_private *priv = dev->dev_private; volatile void __iomem *addr = priv->mmio + reg; -#ifdef iowrite64 +#if defined(iowrite64) && !defined(iowrite64_is_nonatomic) iowrite64(data, addr); #else __iowmb(); Patches currently in stable-queue which might be from logang(a)deltatee.com are queue-4.14/drm-tilcdc-ensure-nonatomic-iowrite64-is-not-used.patch

6 years, 9 months

1
0
0 0

Patch "drm/omap: DMM: Check for DMM readiness after successful transaction commit" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled drm/omap: DMM: Check for DMM readiness after successful transaction commit to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drm-omap-dmm-check-for-dmm-readiness-after-successful-transaction-commit.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:26:48 CET 2018 From: Peter Ujfalusi <peter.ujfalusi(a)ti.com> Date: Fri, 29 Sep 2017 14:49:49 +0300 Subject: drm/omap: DMM: Check for DMM readiness after successful transaction commit From: Peter Ujfalusi <peter.ujfalusi(a)ti.com> [ Upstream commit b7ea6b286c4051e043f691781785e3c4672f014a ] Check the status of the DMM engine after it is reported that the transaction was completed as in rare cases the engine might not reached a working state. The wait_status() will print information in case the DMM is not reached the expected state and the dmm_txn_commit() will return with an error code to make sure that we are not continuing with a broken setup. Signed-off-by: Peter Ujfalusi <peter.ujfalusi(a)ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen(a)ti.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpu/drm/omapdrm/omap_dmm_tiler.c | 5 +++++ 1 file changed, 5 insertions(+) --- a/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c +++ b/drivers/gpu/drm/omapdrm/omap_dmm_tiler.c @@ -298,7 +298,12 @@ static int dmm_txn_commit(struct dmm_txn msecs_to_jiffies(100))) { dev_err(dmm->dev, "timed out waiting for done\n"); ret = -ETIMEDOUT; + goto cleanup; } + + /* Check the engine status before continue */ + ret = wait_status(engine, DMM_PATSTATUS_READY | + DMM_PATSTATUS_VALID | DMM_PATSTATUS_DONE); } cleanup: Patches currently in stable-queue which might be from peter.ujfalusi(a)ti.com are queue-4.14/drm-omap-dmm-check-for-dmm-readiness-after-successful-transaction-commit.patch queue-4.14/dmaengine-ti-dma-crossbar-fix-event-mapping-for-tpcc_evt_mux_60_63.patch

6 years, 9 months

1
0
0 0

Patch "drm/msm: fix leak in failed get_pages" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled drm/msm: fix leak in failed get_pages to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: drm-msm-fix-leak-in-failed-get_pages.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:26:48 CET 2018 From: Prakash Kamliya <pkamliya(a)codeaurora.org> Date: Mon, 4 Dec 2017 19:10:15 +0530 Subject: drm/msm: fix leak in failed get_pages From: Prakash Kamliya <pkamliya(a)codeaurora.org> [ Upstream commit 62e3a3e342af3c313ab38603811ecdb1fcc79edb ] get_pages doesn't keep a reference of the pages allocated when it fails later in the code path. This can lead to a memory leak. Keep reference of the allocated pages so that it can be freed when msm_gem_free_object gets called later during cleanup. Signed-off-by: Prakash Kamliya <pkamliya(a)codeaurora.org> Signed-off-by: Sharat Masetty <smasetty(a)codeaurora.org> Signed-off-by: Rob Clark <robdclark(a)gmail.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/gpu/drm/msm/msm_gem.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) --- a/drivers/gpu/drm/msm/msm_gem.c +++ b/drivers/gpu/drm/msm/msm_gem.c @@ -93,14 +93,17 @@ static struct page **get_pages(struct dr return p; } + msm_obj->pages = p; + msm_obj->sgt = drm_prime_pages_to_sg(p, npages); if (IS_ERR(msm_obj->sgt)) { + void *ptr = ERR_CAST(msm_obj->sgt); + dev_err(dev->dev, "failed to allocate sgt\n"); - return ERR_CAST(msm_obj->sgt); + msm_obj->sgt = NULL; + return ptr; } - msm_obj->pages = p; - /* For non-cached buffers, ensure the new pages are clean * because display controller, GPU, etc. are not coherent: */ @@ -135,7 +138,10 @@ static void put_pages(struct drm_gem_obj if (msm_obj->flags & (MSM_BO_WC|MSM_BO_UNCACHED)) dma_unmap_sg(obj->dev->dev, msm_obj->sgt->sgl, msm_obj->sgt->nents, DMA_BIDIRECTIONAL); - sg_free_table(msm_obj->sgt); + + if (msm_obj->sgt) + sg_free_table(msm_obj->sgt); + kfree(msm_obj->sgt); if (use_pages(obj)) Patches currently in stable-queue which might be from pkamliya(a)codeaurora.org are queue-4.14/drm-msm-fix-leak-in-failed-get_pages.patch

6 years, 9 months

1
0
0 0

Patch "dmaengine: zynqmp_dma: Fix race condition in the probe" has been added to the 4.14-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled dmaengine: zynqmp_dma: Fix race condition in the probe to the 4.14-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: dmaengine-zynqmp_dma-fix-race-condition-in-the-probe.patch and it can be found in the queue-4.14 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:26:48 CET 2018 From: Kedareswara rao Appana <appana.durga.rao(a)xilinx.com> Date: Thu, 7 Dec 2017 10:54:28 +0530 Subject: dmaengine: zynqmp_dma: Fix race condition in the probe From: Kedareswara rao Appana <appana.durga.rao(a)xilinx.com> [ Upstream commit 5ba080aada5e739165e0f38d5cc3b04c82b323c8 ] Incase of interrupt property is not present, Driver is trying to free an invalid irq, This patch fixes it by adding a check before freeing the irq. Signed-off-by: Kedareswara rao Appana <appanad(a)xilinx.com> Signed-off-by: Vinod Koul <vinod.koul(a)intel.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/dma/xilinx/zynqmp_dma.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/dma/xilinx/zynqmp_dma.c +++ b/drivers/dma/xilinx/zynqmp_dma.c @@ -838,7 +838,8 @@ static void zynqmp_dma_chan_remove(struc if (!chan) return; - devm_free_irq(chan->zdev->dev, chan->irq, chan); + if (chan->irq) + devm_free_irq(chan->zdev->dev, chan->irq, chan); tasklet_kill(&chan->tasklet); list_del(&chan->common.device_node); clk_disable_unprepare(chan->clk_apb); Patches currently in stable-queue which might be from appana.durga.rao(a)xilinx.com are queue-4.14/dmaengine-zynqmp_dma-fix-race-condition-in-the-probe.patch

6 years, 9 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror March 2018