March 2018 - Linux-stable-mirror

Patch "Bluetooth: hci_qca: Avoid setup failure on missing rampatch" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Bluetooth: hci_qca: Avoid setup failure on missing rampatch to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bluetooth-hci_qca-avoid-setup-failure-on-missing-rampatch.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:24 CET 2018 From: Loic Poulain <loic.poulain(a)linaro.org> Date: Mon, 6 Nov 2017 12:16:56 +0100 Subject: Bluetooth: hci_qca: Avoid setup failure on missing rampatch From: Loic Poulain <loic.poulain(a)linaro.org> [ Upstream commit ba8f3597900291a93604643017fff66a14546015 ] Assuming that the original code idea was to enable in-band sleeping only if the setup_rome method returns succes and run in 'standard' mode otherwise, we should not return setup_rome return value which makes qca_setup fail if no rampatch/nvm file found. This fixes BT issue on the dragonboard-820C p4 which includes the following QCA controller: hci0: Product:0x00000008 hci0: Patch :0x00000111 hci0: ROM :0x00000302 hci0: SOC :0x00000044 Since there is no rampatch for this controller revision, just make it work as is. Signed-off-by: Loic Poulain <loic.poulain(a)linaro.org> Signed-off-by: Marcel Holtmann <marcel(a)holtmann.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/bluetooth/hci_qca.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/bluetooth/hci_qca.c +++ b/drivers/bluetooth/hci_qca.c @@ -936,6 +936,9 @@ static int qca_setup(struct hci_uart *hu if (!ret) { set_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags); qca_debugfs_init(hdev); + } else if (ret == -ENOENT) { + /* No patch/nvm-config found, run with original fw/config */ + ret = 0; } /* Setup bdaddr */ Patches currently in stable-queue which might be from loic.poulain(a)linaro.org are queue-4.9/bluetooth-btqcomsmd-fix-skb-double-free-corruption.patch queue-4.9/bluetooth-hci_qca-avoid-setup-failure-on-missing-rampatch.patch

7 years, 1 month

1
0
0 0

Patch "Bluetooth: hci_ldisc: Add protocol check to hci_uart_tx_wakeup()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Bluetooth: hci_ldisc: Add protocol check to hci_uart_tx_wakeup() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bluetooth-hci_ldisc-add-protocol-check-to-hci_uart_tx_wakeup.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:23 CET 2018 From: Dean Jenkins <Dean_Jenkins(a)mentor.com> Date: Fri, 28 Apr 2017 13:57:26 +0100 Subject: Bluetooth: hci_ldisc: Add protocol check to hci_uart_tx_wakeup() From: Dean Jenkins <Dean_Jenkins(a)mentor.com> [ Upstream commit 2d6f1da168e1d62c47f7d50135ac4cbd8411dcb1 ] Before attempting to schedule a work-item onto hu->write_work in hci_uart_tx_wakeup(), check that the Data Link protocol layer is still bound to the HCI UART driver. Failure to perform this protocol check causes a race condition between the work queue hu->write_work running hci_uart_write_work() and the Data Link protocol layer being unbound (closed) in hci_uart_tty_close(). Note hci_uart_tty_close() does have a "cancel_work_sync(&hu->write_work)" but it is ineffective because it cannot prevent work-items being added to hu->write_work after cancel_work_sync() has run. Therefore, add a check for HCI_UART_PROTO_READY into hci_uart_tx_wakeup() which prevents scheduling of the work queue when HCI_UART_PROTO_READY is in the clear state. However, note a small race condition remains because the hci_uart_tx_wakeup() thread can run in parallel with the hci_uart_tty_close() thread so it is possible that a schedule of hu->write_work can occur when HCI_UART_PROTO_READY is cleared. A complete solution needs locking of the threads which is implemented in a future commit. Signed-off-by: Dean Jenkins <Dean_Jenkins(a)mentor.com> Signed-off-by: Marcel Holtmann <marcel(a)holtmann.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/bluetooth/hci_ldisc.c | 3 +++ 1 file changed, 3 insertions(+) --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -125,6 +125,9 @@ static inline struct sk_buff *hci_uart_d int hci_uart_tx_wakeup(struct hci_uart *hu) { + if (!test_bit(HCI_UART_PROTO_READY, &hu->flags)) + return 0; + if (test_and_set_bit(HCI_UART_SENDING, &hu->tx_state)) { set_bit(HCI_UART_TX_WAKEUP, &hu->tx_state); return 0; Patches currently in stable-queue which might be from Dean_Jenkins(a)mentor.com are queue-4.9/bluetooth-hci_ldisc-add-protocol-check-to-hci_uart_dequeue.patch queue-4.9/bluetooth-hci_ldisc-add-protocol-check-to-hci_uart_tx_wakeup.patch

7 years, 1 month

1
0
0 0

Patch "Bluetooth: hci_ldisc: Add protocol check to hci_uart_dequeue()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Bluetooth: hci_ldisc: Add protocol check to hci_uart_dequeue() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bluetooth-hci_ldisc-add-protocol-check-to-hci_uart_dequeue.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:23 CET 2018 From: Dean Jenkins <Dean_Jenkins(a)mentor.com> Date: Fri, 28 Apr 2017 13:57:25 +0100 Subject: Bluetooth: hci_ldisc: Add protocol check to hci_uart_dequeue() From: Dean Jenkins <Dean_Jenkins(a)mentor.com> [ Upstream commit 048e1bd3a27fbeb84ccdff52e165370c1339a193 ] Before attempting to dequeue a Data Link protocol encapsulated message, check that the Data Link protocol is still bound to the HCI UART driver. This makes the code consistent with the usage of the other proto function pointers. Therefore, add a check for HCI_UART_PROTO_READY into hci_uart_dequeue() and return NULL if the Data Link protocol is not bound. This is needed for robustness as there is a scheduling race condition. hci_uart_write_work() is scheduled to run via work queue hu->write_work from hci_uart_tx_wakeup(). Therefore, there is a delay between scheduling hci_uart_write_work() to run and hci_uart_dequeue() running whereby the Data Link protocol layer could become unbound during the scheduling delay. In this case, without the check, the call to the unbound Data Link protocol layer dequeue function can crash. It is noted that hci_uart_tty_close() has a "cancel_work_sync(&hu->write_work)" statement but this only reduces the window of the race condition because it is possible for a new work-item to be added to work queue hu->write_work after the call to cancel_work_sync(). For example, Data Link layer retransmissions can be added to the work queue after the cancel_work_sync() has finished. Signed-off-by: Dean Jenkins <Dean_Jenkins(a)mentor.com> Signed-off-by: Marcel Holtmann <marcel(a)holtmann.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/bluetooth/hci_ldisc.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -113,10 +113,12 @@ static inline struct sk_buff *hci_uart_d { struct sk_buff *skb = hu->tx_skb; - if (!skb) - skb = hu->proto->dequeue(hu); - else + if (!skb) { + if (test_bit(HCI_UART_PROTO_READY, &hu->flags)) + skb = hu->proto->dequeue(hu); + } else { hu->tx_skb = NULL; + } return skb; } Patches currently in stable-queue which might be from Dean_Jenkins(a)mentor.com are queue-4.9/bluetooth-hci_ldisc-add-protocol-check-to-hci_uart_dequeue.patch queue-4.9/bluetooth-hci_ldisc-add-protocol-check-to-hci_uart_tx_wakeup.patch

7 years, 1 month

1
0
0 0

Patch "Bluetooth: btqcomsmd: Fix skb double free corruption" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Bluetooth: btqcomsmd: Fix skb double free corruption to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: bluetooth-btqcomsmd-fix-skb-double-free-corruption.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:24 CET 2018 From: Loic Poulain <loic.poulain(a)linaro.org> Date: Wed, 22 Nov 2017 15:03:17 +0100 Subject: Bluetooth: btqcomsmd: Fix skb double free corruption From: Loic Poulain <loic.poulain(a)linaro.org> [ Upstream commit 67b8fbead4685b36d290a0ef91c6ddffc4920ec9 ] In case of hci send frame failure, skb is still owned by the caller (hci_core) and then should not be freed. This fixes crash on dragonboard-410c when sending SCO packet. skb is freed by both btqcomsmd and hci_core. Fixes: 1511cc750c3d ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver") Signed-off-by: Loic Poulain <loic.poulain(a)linaro.org> Signed-off-by: Marcel Holtmann <marcel(a)holtmann.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/bluetooth/btqcomsmd.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/bluetooth/btqcomsmd.c +++ b/drivers/bluetooth/btqcomsmd.c @@ -85,7 +85,8 @@ static int btqcomsmd_send(struct hci_dev break; } - kfree_skb(skb); + if (!ret) + kfree_skb(skb); return ret; } Patches currently in stable-queue which might be from loic.poulain(a)linaro.org are queue-4.9/bluetooth-btqcomsmd-fix-skb-double-free-corruption.patch queue-4.9/bluetooth-hci_qca-avoid-setup-failure-on-missing-rampatch.patch

7 years, 1 month

1
0
0 0

Patch "block/mq: Cure cpu hotplug lock inversion" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled block/mq: Cure cpu hotplug lock inversion to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: block-mq-cure-cpu-hotplug-lock-inversion.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:24 CET 2018 From: Peter Zijlstra <peterz(a)infradead.org> Date: Thu, 4 May 2017 15:05:26 +0200 Subject: block/mq: Cure cpu hotplug lock inversion From: Peter Zijlstra <peterz(a)infradead.org> [ Upstream commit eabe06595d62cfa9278e2cd012df614bc68a7042 ] By poking at /debug/sched_features I triggered the following splat: [] ====================================================== [] WARNING: possible circular locking dependency detected [] 4.11.0-00873-g964c8b7-dirty #694 Not tainted [] ------------------------------------------------------ [] bash/2109 is trying to acquire lock: [] (cpu_hotplug_lock.rw_sem){++++++}, at: [<ffffffff8120cb8b>] static_key_slow_dec+0x1b/0x50 [] [] but task is already holding lock: [] (&sb->s_type->i_mutex_key#4){+++++.}, at: [<ffffffff81140216>] sched_feat_write+0x86/0x170 [] [] which lock already depends on the new lock. [] [] [] the existing dependency chain (in reverse order) is: [] [] -> #2 (&sb->s_type->i_mutex_key#4){+++++.}: [] lock_acquire+0x100/0x210 [] down_write+0x28/0x60 [] start_creating+0x5e/0xf0 [] debugfs_create_dir+0x13/0x110 [] blk_mq_debugfs_register+0x21/0x70 [] blk_mq_register_dev+0x64/0xd0 [] blk_register_queue+0x6a/0x170 [] device_add_disk+0x22d/0x440 [] loop_add+0x1f3/0x280 [] loop_init+0x104/0x142 [] do_one_initcall+0x43/0x180 [] kernel_init_freeable+0x1de/0x266 [] kernel_init+0xe/0x100 [] ret_from_fork+0x31/0x40 [] [] -> #1 (all_q_mutex){+.+.+.}: [] lock_acquire+0x100/0x210 [] __mutex_lock+0x6c/0x960 [] mutex_lock_nested+0x1b/0x20 [] blk_mq_init_allocated_queue+0x37c/0x4e0 [] blk_mq_init_queue+0x3a/0x60 [] loop_add+0xe5/0x280 [] loop_init+0x104/0x142 [] do_one_initcall+0x43/0x180 [] kernel_init_freeable+0x1de/0x266 [] kernel_init+0xe/0x100 [] ret_from_fork+0x31/0x40 [] *** DEADLOCK *** [] [] 3 locks held by bash/2109: [] #0: (sb_writers#11){.+.+.+}, at: [<ffffffff81292bcd>] vfs_write+0x17d/0x1a0 [] #1: (debugfs_srcu){......}, at: [<ffffffff8155a90d>] full_proxy_write+0x5d/0xd0 [] #2: (&sb->s_type->i_mutex_key#4){+++++.}, at: [<ffffffff81140216>] sched_feat_write+0x86/0x170 [] [] stack backtrace: [] CPU: 9 PID: 2109 Comm: bash Not tainted 4.11.0-00873-g964c8b7-dirty #694 [] Hardware name: Intel Corporation S2600GZ/S2600GZ, BIOS SE5C600.86B.02.02.0002.122320131210 12/23/2013 [] Call Trace: [] lock_acquire+0x100/0x210 [] get_online_cpus+0x2a/0x90 [] static_key_slow_dec+0x1b/0x50 [] static_key_disable+0x20/0x30 [] sched_feat_write+0x131/0x170 [] full_proxy_write+0x97/0xd0 [] __vfs_write+0x28/0x120 [] vfs_write+0xb5/0x1a0 [] SyS_write+0x49/0xa0 [] entry_SYSCALL_64_fastpath+0x23/0xc2 This is because of the cpu hotplug lock rework. Break the chain at #1 by reversing the lock acquisition order. This way i_mutex_key#4 no longer depends on cpu_hotplug_lock and things are good. Cc: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Peter Zijlstra (Intel) <peterz(a)infradead.org> Signed-off-by: Jens Axboe <axboe(a)fb.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- block/blk-mq.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/block/blk-mq.c +++ b/block/blk-mq.c @@ -2014,15 +2014,15 @@ struct request_queue *blk_mq_init_alloca blk_mq_init_cpu_queues(q, set->nr_hw_queues); - get_online_cpus(); mutex_lock(&all_q_mutex); + get_online_cpus(); list_add_tail(&q->all_q_node, &all_q_list); blk_mq_add_queue_tag_set(set, q); blk_mq_map_swqueue(q, cpu_online_mask); - mutex_unlock(&all_q_mutex); put_online_cpus(); + mutex_unlock(&all_q_mutex); return q; Patches currently in stable-queue which might be from peterz(a)infradead.org are queue-4.9/acpi-processor-fix-error-handling-in-__acpi_processor_start.patch queue-4.9/x86-reboot-turn-off-kvm-when-halting-a-cpu.patch queue-4.9/block-mq-cure-cpu-hotplug-lock-inversion.patch queue-4.9/acpi-processor-replace-racy-task-affinity-logic.patch queue-4.9/perf-tests-kmod-path-don-t-fail-if-compressed-modules-aren-t-supported.patch queue-4.9/cpufreq-sh-replace-racy-task-affinity-logic.patch queue-4.9/x86-kaslr-fix-kexec-kernel-boot-crash-when-kaslr-randomization-fails.patch

7 years, 1 month

1
0
0 0

Patch "ath10k: handling qos at STA side based on AP WMM enable/disable" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ath10k: handling qos at STA side based on AP WMM enable/disable to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ath10k-handling-qos-at-sta-side-based-on-ap-wmm-enable-disable.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:24 CET 2018 From: Balaji Pothunoori <bpothuno(a)qti.qualcomm.com> Date: Thu, 7 Dec 2017 16:58:04 +0200 Subject: ath10k: handling qos at STA side based on AP WMM enable/disable From: Balaji Pothunoori <bpothuno(a)qti.qualcomm.com> [ Upstream commit 07ffb4497360ae8789f05555fec8171ee952304d ] Data packets are not sent by STA in case of STA joined to non QOS AP (WMM disabled AP). This is happening because of STA is sending data packets to firmware from host with qos enabled along with non qos queue value(TID = 16). Due to qos enabled, firmware is discarding the packet. This patch fixes this issue by updating the qos based on station WME capability field if WMM is disabled in AP. This patch is required by 10.4 family chipsets like QCA4019/QCA9888/QCA9884/QCA99X0. Firmware Versoin : 10.4-3.5.1-00018. For 10.2.4 family chipsets QCA988X/QCA9887 and QCA6174 this patch has no effect. Signed-off-by: Balaji Pothunoori <bpothuno(a)qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo(a)qca.qualcomm.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/ath/ath10k/mac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -2505,7 +2505,7 @@ static void ath10k_peer_assoc_h_qos(stru } break; case WMI_VDEV_TYPE_STA: - if (vif->bss_conf.qos) + if (sta->wme) arg->peer_flags |= arvif->ar->wmi.peer_flags->qos; break; case WMI_VDEV_TYPE_IBSS: Patches currently in stable-queue which might be from bpothuno(a)qti.qualcomm.com are queue-4.9/ath10k-handling-qos-at-sta-side-based-on-ap-wmm-enable-disable.patch

7 years, 1 month

1
0
0 0

Patch "ath10k: fix out of bounds access to local buffer" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ath10k: fix out of bounds access to local buffer to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ath10k-fix-out-of-bounds-access-to-local-buffer.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:24 CET 2018 From: Michael Mera <dev(a)michaelmera.com> Date: Mon, 24 Apr 2017 16:11:57 +0900 Subject: ath10k: fix out of bounds access to local buffer From: Michael Mera <dev(a)michaelmera.com> [ Upstream commit a16703aaeaedec7a8bee5be5522c7c3e75478951 ] During write to debugfs file simulate_fw_crash, fixed-size local buffer 'buf' is accessed and modified at index 'count-1', where 'count' is the size of the write (so potentially out of bounds). This patch fixes this problem. Signed-off-by: Michael Mera <dev(a)michaelmera.com> Signed-off-by: Kalle Valo <kvalo(a)qca.qualcomm.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/ath/ath10k/debug.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) --- a/drivers/net/wireless/ath/ath10k/debug.c +++ b/drivers/net/wireless/ath/ath10k/debug.c @@ -624,17 +624,21 @@ static ssize_t ath10k_write_simulate_fw_ size_t count, loff_t *ppos) { struct ath10k *ar = file->private_data; - char buf[32]; + char buf[32] = {0}; + ssize_t rc; int ret; - simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, user_buf, count); + /* filter partial writes and invalid commands */ + if (*ppos != 0 || count >= sizeof(buf) || count == 0) + return -EINVAL; - /* make sure that buf is null terminated */ - buf[sizeof(buf) - 1] = 0; + rc = simple_write_to_buffer(buf, sizeof(buf) - 1, ppos, user_buf, count); + if (rc < 0) + return rc; /* drop the possible '\n' from the end */ - if (buf[count - 1] == '\n') - buf[count - 1] = 0; + if (buf[*ppos - 1] == '\n') + buf[*ppos - 1] = '\0'; mutex_lock(&ar->conf_mutex); Patches currently in stable-queue which might be from dev(a)michaelmera.com are queue-4.9/ath10k-fix-out-of-bounds-access-to-local-buffer.patch

7 years, 1 month

1
0
0 0

Patch "ath: Fix updating radar flags for coutry code India" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ath: Fix updating radar flags for coutry code India to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: ath-fix-updating-radar-flags-for-coutry-code-india.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:23 CET 2018 From: Mohammed Shafi Shajakhan <mohammed(a)qti.qualcomm.com> Date: Wed, 12 Apr 2017 23:19:37 +0530 Subject: ath: Fix updating radar flags for coutry code India From: Mohammed Shafi Shajakhan <mohammed(a)qti.qualcomm.com> [ Upstream commit c0c345d4cacc6a1f39d4856f37dcf6e34f51a5e4 ] As per latest regulatory update for India, channel 52, 56, 60, 64 is no longer restricted to DFS. Enabling DFS/no infra flags in driver results in applying all DFS related restrictions (like doing CAC etc before this channel moves to 'available state') for these channels even though the country code is programmed as 'India' in he hardware, fix this by relaxing the frequency range while applying RADAR flags only if the country code is programmed to India. If the frequency range needs to modified based on different country code, ath_is_radar_freq can be extended/modified dynamically. Signed-off-by: Mohammed Shafi Shajakhan <mohammed(a)qti.qualcomm.com> Signed-off-by: Kalle Valo <kvalo(a)qca.qualcomm.com> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/wireless/ath/regd.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-) --- a/drivers/net/wireless/ath/regd.c +++ b/drivers/net/wireless/ath/regd.c @@ -254,8 +254,12 @@ bool ath_is_49ghz_allowed(u16 regdomain) EXPORT_SYMBOL(ath_is_49ghz_allowed); /* Frequency is one where radar detection is required */ -static bool ath_is_radar_freq(u16 center_freq) +static bool ath_is_radar_freq(u16 center_freq, + struct ath_regulatory *reg) + { + if (reg->country_code == CTRY_INDIA) + return (center_freq >= 5500 && center_freq <= 5700); return (center_freq >= 5260 && center_freq <= 5700); } @@ -306,7 +310,7 @@ __ath_reg_apply_beaconing_flags(struct w enum nl80211_reg_initiator initiator, struct ieee80211_channel *ch) { - if (ath_is_radar_freq(ch->center_freq) || + if (ath_is_radar_freq(ch->center_freq, reg) || (ch->flags & IEEE80211_CHAN_RADAR)) return; @@ -395,8 +399,9 @@ ath_reg_apply_ir_flags(struct wiphy *wip } } -/* Always apply Radar/DFS rules on freq range 5260 MHz - 5700 MHz */ -static void ath_reg_apply_radar_flags(struct wiphy *wiphy) +/* Always apply Radar/DFS rules on freq range 5500 MHz - 5700 MHz */ +static void ath_reg_apply_radar_flags(struct wiphy *wiphy, + struct ath_regulatory *reg) { struct ieee80211_supported_band *sband; struct ieee80211_channel *ch; @@ -409,7 +414,7 @@ static void ath_reg_apply_radar_flags(st for (i = 0; i < sband->n_channels; i++) { ch = &sband->channels[i]; - if (!ath_is_radar_freq(ch->center_freq)) + if (!ath_is_radar_freq(ch->center_freq, reg)) continue; /* We always enable radar detection/DFS on this * frequency range. Additionally we also apply on @@ -505,7 +510,7 @@ void ath_reg_notifier_apply(struct wiphy struct ath_common *common = container_of(reg, struct ath_common, regulatory); /* We always apply this */ - ath_reg_apply_radar_flags(wiphy); + ath_reg_apply_radar_flags(wiphy, reg); /* * This would happen when we have sent a custom regulatory request @@ -653,7 +658,7 @@ ath_regd_init_wiphy(struct ath_regulator } wiphy_apply_custom_regulatory(wiphy, regd); - ath_reg_apply_radar_flags(wiphy); + ath_reg_apply_radar_flags(wiphy, reg); ath_reg_apply_world_flags(wiphy, NL80211_REGDOM_SET_BY_DRIVER, reg); return 0; } Patches currently in stable-queue which might be from mohammed(a)qti.qualcomm.com are queue-4.9/mac80211-fix-possible-sband-related-null-pointer-de-reference.patch queue-4.9/ath-fix-updating-radar-flags-for-coutry-code-india.patch

7 years, 1 month

1
0
0 0

Patch "ASoC: Intel: Skylake: Uninitialized variable in probe_codec()" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ASoC: Intel: Skylake: Uninitialized variable in probe_codec() to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: asoc-intel-skylake-uninitialized-variable-in-probe_codec.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:23 CET 2018 From: Dan Carpenter <dan.carpenter(a)oracle.com> Date: Thu, 20 Apr 2017 13:17:02 +0300 Subject: ASoC: Intel: Skylake: Uninitialized variable in probe_codec() From: Dan Carpenter <dan.carpenter(a)oracle.com> [ Upstream commit e6a33532affd14c12688c0e9b2e773e8b2550f3b ] My static checker complains that if snd_hdac_bus_get_response() returns -EIO then "res" is uninitialized. Fix this by initializing it to -1 so that the error is handled correctly. Fixes: d8c2dab8381d ("ASoC: Intel: Add Skylake HDA audio driver") Signed-off-by: Dan Carpenter <dan.carpenter(a)oracle.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/soc/intel/skylake/skl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -457,7 +457,7 @@ static int probe_codec(struct hdac_ext_b struct hdac_bus *bus = ebus_to_hbus(ebus); unsigned int cmd = (addr << 28) | (AC_NODE_ROOT << 20) | (AC_VERB_PARAMETERS << 8) | AC_PAR_VENDOR_ID; - unsigned int res; + unsigned int res = -1; mutex_lock(&bus->cmd_mutex); snd_hdac_bus_send_cmd(bus, cmd); Patches currently in stable-queue which might be from dan.carpenter(a)oracle.com are queue-4.9/netfilter-x_tables-unlock-on-error-in-xt_find_table_lock.patch queue-4.9/asoc-intel-skylake-uninitialized-variable-in-probe_codec.patch queue-4.9/mmc-host-omap_hsmmc-checking-for-null-instead-of-is_err.patch queue-4.9/qed-unlock-on-error-in-qed_vf_pf_acquire.patch queue-4.9/hsi-ssi_protocol-double-free-in-ssip_pn_xmit.patch queue-4.9/cifs-small-underflow-in-cnvrtdosunixtm.patch queue-4.9/ib-rdmavt-restore-irqs-on-error-path-in-rvt_create_ah.patch

7 years, 1 month

1
0
0 0

Patch "ASoC: Intel: Atom: update Thinkpad 10 quirk" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ASoC: Intel: Atom: update Thinkpad 10 quirk to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: asoc-intel-atom-update-thinkpad-10-quirk.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Mar 22 14:40:23 CET 2018 From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Date: Mon, 17 Apr 2017 10:04:07 -0500 Subject: ASoC: Intel: Atom: update Thinkpad 10 quirk From: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> [ Upstream commit beb5989a8c6c6867b4e873cca2a66d31f977368f ] There are multiple skews of the same Lenovo audio hardware based on the Realtek RT5670 codec. Manufacturer: LENOVO Product Name: 20C1CTO1WW Version: ThinkPad 10 Manufacturer: LENOVO Product Name: 20C3001VHH Version: ThinkPad 10 Manufacturer: LENOVO Product Name: 20C10024GE Version: ThinkPad Tablet B Manufacturer: LENOVO Product Name: 20359 Version: Lenovo Miix 2 10 For all these devices, the same quirk is used to force the machine driver to be based on RT5670 instead of RT5640 as indicated by the BIOS. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96691 Tested-by: Nicole Faerber <nicole.faerber(a)dpin.de> Tested-by: Viacheslav Ostroukh <v.dev(a)ostroukh.me> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart(a)linux.intel.com> Signed-off-by: Mark Brown <broonie(a)kernel.org> Signed-off-by: Sasha Levin <alexander.levin(a)microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/soc/intel/atom/sst/sst_acpi.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) --- a/sound/soc/intel/atom/sst/sst_acpi.c +++ b/sound/soc/intel/atom/sst/sst_acpi.c @@ -420,7 +420,21 @@ static const struct dmi_system_id byt_ta .callback = byt_thinkpad10_quirk_cb, .matches = { DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), - DMI_MATCH(DMI_PRODUCT_NAME, "20C3001VHH"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad 10"), + }, + }, + { + .callback = byt_thinkpad10_quirk_cb, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad Tablet B"), + }, + }, + { + .callback = byt_thinkpad10_quirk_cb, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Miix 2 10"), }, }, { } Patches currently in stable-queue which might be from pierre-louis.bossart(a)linux.intel.com are queue-4.9/asoc-intel-atom-update-thinkpad-10-quirk.patch

7 years, 1 month

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror March 2018