February 2018 - Linux-stable-mirror

[PATCH] btrfs: Handle btrfs_set_extent_delalloc failure in fixup worker

by Nikolay Borisov

This function was introduced by 247e743cbe6e ("Btrfs: Use async helpers to deal with pages that have been improperly dirtied") and it didn't do any error handling then. This function might very well fail in ENOMEM situation, yet it's not handled, this could lead to inconsistent state. So let's handle the failure by setting the mapping error bit. Cc: stable(a)vger.kernel.org Signed-off-by: Nikolay Borisov <nborisov(a)suse.com> Reviewed-by: Qu Wenruo <wqu(a)suse.com> Reviewed-by: David Sterba <dsterba(a)suse.com> Signed-off-by: David Sterba <dsterba(a)suse.com> --- Here is the 4.14 backport of upstream commit f3038ee3a3f1017a1cbe9907e31fa12d366c5dcb fs/btrfs/inode.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index c71afd424900..5eaedff28a32 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -2101,8 +2101,15 @@ static void btrfs_writepage_fixup_worker(struct btrfs_work *work) goto out; } - btrfs_set_extent_delalloc(inode, page_start, page_end, &cached_state, - 0); + ret = btrfs_set_extent_delalloc(inode, page_start, page_end, + &cached_state, 0); + if (ret) { + mapping_set_error(page->mapping, ret); + end_extent_writepage(page, ret, page_start, page_end); + ClearPageChecked(page); + goto out; + } + ClearPageChecked(page); set_page_dirty(page); out: -- 2.7.4

6 years, 11 months

1
0
0 0

[PATCH] btrfs: Handle btrfs_set_extent_delalloc failure in fixup worker

by Nikolay Borisov

This function was introduced by 247e743cbe6e ("Btrfs: Use async helpers to deal with pages that have been improperly dirtied") and it didn't do any error handling then. This function might very well fail in ENOMEM situation, yet it's not handled, this could lead to inconsistent state. So let's handle the failure by setting the mapping error bit. Cc: stable(a)vger.kernel.org Signed-off-by: Nikolay Borisov <nborisov(a)suse.com> Reviewed-by: Qu Wenruo <wqu(a)suse.com> Reviewed-by: David Sterba <dsterba(a)suse.com> Signed-off-by: David Sterba <dsterba(a)suse.com> --- Here is the 4.9 backport of upstream commit f3038ee3a3f1017a1cbe9907e31fa12d366c5dcb fs/btrfs/inode.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 894d56361ea9..a8a1fb40e258 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -2063,8 +2063,15 @@ static void btrfs_writepage_fixup_worker(struct btrfs_work *work) goto out; } - btrfs_set_extent_delalloc(inode, page_start, page_end, &cached_state, - 0); + ret = btrfs_set_extent_delalloc(inode, page_start, page_end, + &cached_state, 0); + if (ret) { + mapping_set_error(page->mapping, ret); + end_extent_writepage(page, ret, page_start, page_end); + ClearPageChecked(page); + goto out; + } + ClearPageChecked(page); set_page_dirty(page); out: -- 2.7.4

6 years, 11 months

1
0
0 0

Patch "xtensa: fix futex_atomic_cmpxchg_inatomic" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled xtensa: fix futex_atomic_cmpxchg_inatomic to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: xtensa-fix-futex_atomic_cmpxchg_inatomic.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From ca47480921587ae30417dd234a9f79af188e3666 Mon Sep 17 00:00:00 2001 From: Max Filippov <jcmvbkbc(a)gmail.com> Date: Fri, 5 Jan 2018 14:27:58 -0800 Subject: xtensa: fix futex_atomic_cmpxchg_inatomic From: Max Filippov <jcmvbkbc(a)gmail.com> commit ca47480921587ae30417dd234a9f79af188e3666 upstream. Return 0 if the operation was successful, not the userspace memory value. Check that userspace value equals passed oldval, not itself. Don't update *uval if the value wasn't read from userspace memory. This fixes process hang due to infinite loop in futex_lock_pi. It also fixes a bunch of glibc tests nptl/tst-mutexpi*. Signed-off-by: Max Filippov <jcmvbkbc(a)gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/xtensa/include/asm/futex.h | 23 ++++++++++------------- 1 file changed, 10 insertions(+), 13 deletions(-) --- a/arch/xtensa/include/asm/futex.h +++ b/arch/xtensa/include/asm/futex.h @@ -109,7 +109,6 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 oldval, u32 newval) { int ret = 0; - u32 prev; if (!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))) return -EFAULT; @@ -120,26 +119,24 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, __asm__ __volatile__ ( " # futex_atomic_cmpxchg_inatomic\n" - "1: l32i %1, %3, 0\n" - " mov %0, %5\n" - " wsr %1, scompare1\n" - "2: s32c1i %0, %3, 0\n" - "3:\n" + " wsr %5, scompare1\n" + "1: s32c1i %1, %4, 0\n" + " s32i %1, %6, 0\n" + "2:\n" " .section .fixup,\"ax\"\n" " .align 4\n" - "4: .long 3b\n" - "5: l32r %1, 4b\n" - " movi %0, %6\n" + "3: .long 2b\n" + "4: l32r %1, 3b\n" + " movi %0, %7\n" " jx %1\n" " .previous\n" " .section __ex_table,\"a\"\n" - " .long 1b,5b,2b,5b\n" + " .long 1b,4b\n" " .previous\n" - : "+r" (ret), "=&r" (prev), "+m" (*uaddr) - : "r" (uaddr), "r" (oldval), "r" (newval), "I" (-EFAULT) + : "+r" (ret), "+r" (newval), "+m" (*uaddr), "+m" (*uval) + : "r" (uaddr), "r" (oldval), "r" (uval), "I" (-EFAULT) : "memory"); - *uval = prev; return ret; } Patches currently in stable-queue which might be from jcmvbkbc(a)gmail.com are queue-4.9/xtensa-fix-futex_atomic_cmpxchg_inatomic.patch

6 years, 11 months

1
0
0 0

Patch "signal/sh: Ensure si_signo is initialized in do_divide_error" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled signal/sh: Ensure si_signo is initialized in do_divide_error to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: signal-sh-ensure-si_signo-is-initialized-in-do_divide_error.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 0e88bb002a9b2ee8cc3cc9478ce2dc126f849696 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" <ebiederm(a)xmission.com> Date: Mon, 24 Jul 2017 17:30:30 -0500 Subject: signal/sh: Ensure si_signo is initialized in do_divide_error From: Eric W. Biederman <ebiederm(a)xmission.com> commit 0e88bb002a9b2ee8cc3cc9478ce2dc126f849696 upstream. Set si_signo. Cc: Yoshinori Sato <ysato(a)users.sourceforge.jp> Cc: Rich Felker <dalias(a)libc.org> Cc: Paul Mundt <lethal(a)linux-sh.org> Cc: linux-sh(a)vger.kernel.org Fixes: 0983b31849bb ("sh: Wire up division and address error exceptions on SH-2A.") Signed-off-by: "Eric W. Biederman" <ebiederm(a)xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/sh/kernel/traps_32.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/arch/sh/kernel/traps_32.c +++ b/arch/sh/kernel/traps_32.c @@ -607,7 +607,8 @@ asmlinkage void do_divide_error(unsigned break; } - force_sig_info(SIGFPE, &info, current); + info.si_signo = SIGFPE; + force_sig_info(info.si_signo, &info, current); } #endif Patches currently in stable-queue which might be from ebiederm(a)xmission.com are queue-4.9/signal-openrisc-fix-do_unaligned_access-to-send-the-proper-signal.patch queue-4.9/signal-sh-ensure-si_signo-is-initialized-in-do_divide_error.patch

6 years, 11 months

1
0
0 0

Patch "watchdog: imx2_wdt: restore previous timeout after suspend+resume" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled watchdog: imx2_wdt: restore previous timeout after suspend+resume to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: watchdog-imx2_wdt-restore-previous-timeout-after-suspend-resume.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 0be267255cef64e1c58475baa7b25568355a3816 Mon Sep 17 00:00:00 2001 From: Martin Kaiser <martin(a)kaiser.cx> Date: Mon, 1 Jan 2018 18:26:47 +0100 Subject: watchdog: imx2_wdt: restore previous timeout after suspend+resume From: Martin Kaiser <martin(a)kaiser.cx> commit 0be267255cef64e1c58475baa7b25568355a3816 upstream. When the watchdog device is suspended, its timeout is set to the maximum value. During resume, the previously set timeout should be restored. This does not work at the moment. The suspend function calls imx2_wdt_set_timeout(wdog, IMX2_WDT_MAX_TIME); and resume reverts this by calling imx2_wdt_set_timeout(wdog, wdog->timeout); However, imx2_wdt_set_timeout() updates wdog->timeout. Therefore, wdog->timeout is set to IMX2_WDT_MAX_TIME when we enter the resume function. Fix this by adding a new function __imx2_wdt_set_timeout() which only updates the hardware settings. imx2_wdt_set_timeout() now calls __imx2_wdt_set_timeout() and then saves the new timeout to wdog->timeout. During suspend, we call __imx2_wdt_set_timeout() directly so that wdog->timeout won't be updated and we can restore the previous value during resume. This approach makes wdog->timeout different from the actual setting in the hardware which is usually not a good thing. However, the two differ only while we're suspended and no kernel code is running, so it should be ok in this case. Signed-off-by: Martin Kaiser <martin(a)kaiser.cx> Reviewed-by: Guenter Roeck <linux(a)roeck-us.net> Signed-off-by: Guenter Roeck <linux(a)roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim(a)iguana.be> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/watchdog/imx2_wdt.c | 20 +++++++++++++++----- 1 file changed, 15 insertions(+), 5 deletions(-) --- a/drivers/watchdog/imx2_wdt.c +++ b/drivers/watchdog/imx2_wdt.c @@ -169,15 +169,21 @@ static int imx2_wdt_ping(struct watchdog return 0; } -static int imx2_wdt_set_timeout(struct watchdog_device *wdog, - unsigned int new_timeout) +static void __imx2_wdt_set_timeout(struct watchdog_device *wdog, + unsigned int new_timeout) { struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog); - wdog->timeout = new_timeout; - regmap_update_bits(wdev->regmap, IMX2_WDT_WCR, IMX2_WDT_WCR_WT, WDOG_SEC_TO_COUNT(new_timeout)); +} + +static int imx2_wdt_set_timeout(struct watchdog_device *wdog, + unsigned int new_timeout) +{ + __imx2_wdt_set_timeout(wdog, new_timeout); + + wdog->timeout = new_timeout; return 0; } @@ -371,7 +377,11 @@ static int imx2_wdt_suspend(struct devic /* The watchdog IP block is running */ if (imx2_wdt_is_running(wdev)) { - imx2_wdt_set_timeout(wdog, IMX2_WDT_MAX_TIME); + /* + * Don't update wdog->timeout, we'll restore the current value + * during resume. + */ + __imx2_wdt_set_timeout(wdog, IMX2_WDT_MAX_TIME); imx2_wdt_ping(wdog); } Patches currently in stable-queue which might be from martin(a)kaiser.cx are queue-4.9/watchdog-imx2_wdt-restore-previous-timeout-after-suspend-resume.patch

6 years, 11 months

1
0
0 0

Patch "Revert "Bluetooth: btusb: fix QCA Rome suspend/resume"" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled Revert "Bluetooth: btusb: fix QCA Rome suspend/resume" to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: revert-bluetooth-btusb-fix-qca-rome-suspend-resume.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 7d06d5895c159f64c46560dc258e553ad8670fe0 Mon Sep 17 00:00:00 2001 From: Kai-Heng Feng <kai.heng.feng(a)canonical.com> Date: Wed, 20 Dec 2017 19:00:07 +0800 Subject: Revert "Bluetooth: btusb: fix QCA Rome suspend/resume" From: Kai-Heng Feng <kai.heng.feng(a)canonical.com> commit 7d06d5895c159f64c46560dc258e553ad8670fe0 upstream. This reverts commit fd865802c66bc451dc515ed89360f84376ce1a56. This commit causes a regression on some QCA ROME chips. The USB device reset happens in btusb_open(), hence firmware loading gets interrupted. Furthermore, this commit stops working after commit ("a0085f2510e8976614ad8f766b209448b385492f Bluetooth: btusb: driver to enable the usb-wakeup feature"). Reset-resume quirk only gets enabled in btusb_suspend() when it's not a wakeup source. If we really want to reset the USB device, we need to do it before btusb_open(). Let's handle it in drivers/usb/core/quirks.c. Cc: Leif Liddy <leif.linux(a)gmail.com> Cc: Matthias Kaehlcke <mka(a)chromium.org> Cc: Brian Norris <briannorris(a)chromium.org> Cc: Daniel Drake <drake(a)endlessm.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng(a)canonical.com> Reviewed-by: Brian Norris <briannorris(a)chromium.org> Tested-by: Brian Norris <briannorris(a)chromium.org> Signed-off-by: Marcel Holtmann <marcel(a)holtmann.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/bluetooth/btusb.c | 6 ------ 1 file changed, 6 deletions(-) --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -2925,12 +2925,6 @@ static int btusb_probe(struct usb_interf if (id->driver_info & BTUSB_QCA_ROME) { data->setup_on_usb = btusb_setup_qca; hdev->set_bdaddr = btusb_set_bdaddr_ath3012; - - /* QCA Rome devices lose their updated firmware over suspend, - * but the USB hub doesn't notice any status change. - * Explicitly request a device reset on resume. - */ - set_bit(BTUSB_RESET_RESUME, &data->flags); } #ifdef CONFIG_BT_HCIBTUSB_RTL Patches currently in stable-queue which might be from kai.heng.feng(a)canonical.com are queue-4.9/revert-bluetooth-btusb-fix-qca-rome-suspend-resume.patch queue-4.9/bluetooth-btusb-restore-qca-rome-suspend-resume-fix-with-a-rewritten-version.patch

6 years, 11 months

1
0
0 0

Patch "signal/openrisc: Fix do_unaligned_access to send the proper signal" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled signal/openrisc: Fix do_unaligned_access to send the proper signal to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: signal-openrisc-fix-do_unaligned_access-to-send-the-proper-signal.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 500d58300571b6602341b041f97c082a461ef994 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" <ebiederm(a)xmission.com> Date: Tue, 1 Aug 2017 04:16:47 -0500 Subject: signal/openrisc: Fix do_unaligned_access to send the proper signal From: Eric W. Biederman <ebiederm(a)xmission.com> commit 500d58300571b6602341b041f97c082a461ef994 upstream. While reviewing the signal sending on openrisc the do_unaligned_access function stood out because it is obviously wrong. A comment about an si_code set above when actually si_code is never set. Leading to a random si_code being sent to userspace in the event of an unaligned access. Looking further SIGBUS BUS_ADRALN is the proper pair of signal and si_code to send for an unaligned access. That is what other architectures do and what is required by posix. Given that do_unaligned_access is broken in a way that no one can be relying on it on openrisc fix the code to just do the right thing. Fixes: 769a8a96229e ("OpenRISC: Traps") Cc: Jonas Bonn <jonas(a)southpole.se> Cc: Stefan Kristiansson <stefan.kristiansson(a)saunalahti.fi> Cc: Stafford Horne <shorne(a)gmail.com> Cc: Arnd Bergmann <arnd(a)arndb.de> Cc: openrisc(a)lists.librecores.org Acked-by: Stafford Horne <shorne(a)gmail.com> Signed-off-by: "Eric W. Biederman" <ebiederm(a)xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/openrisc/kernel/traps.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) --- a/arch/openrisc/kernel/traps.c +++ b/arch/openrisc/kernel/traps.c @@ -302,12 +302,12 @@ asmlinkage void do_unaligned_access(stru siginfo_t info; if (user_mode(regs)) { - /* Send a SIGSEGV */ - info.si_signo = SIGSEGV; + /* Send a SIGBUS */ + info.si_signo = SIGBUS; info.si_errno = 0; - /* info.si_code has been set above */ - info.si_addr = (void *)address; - force_sig_info(SIGSEGV, &info, current); + info.si_code = BUS_ADRALN; + info.si_addr = (void __user *)address; + force_sig_info(SIGBUS, &info, current); } else { printk("KERNEL: Unaligned Access 0x%.8lx\n", address); show_registers(regs); Patches currently in stable-queue which might be from ebiederm(a)xmission.com are queue-4.9/signal-openrisc-fix-do_unaligned_access-to-send-the-proper-signal.patch queue-4.9/signal-sh-ensure-si_signo-is-initialized-in-do_divide_error.patch

6 years, 11 months

1
0
0 0

Patch "pktcdvd: Fix pkt_setup_dev() error path" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled pktcdvd: Fix pkt_setup_dev() error path to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pktcdvd-fix-pkt_setup_dev-error-path.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 5a0ec388ef0f6e33841aeb810d7fa23f049ec4cd Mon Sep 17 00:00:00 2001 From: Bart Van Assche <bart.vanassche(a)wdc.com> Date: Tue, 2 Jan 2018 11:39:47 -0800 Subject: pktcdvd: Fix pkt_setup_dev() error path From: Bart Van Assche <bart.vanassche(a)wdc.com> commit 5a0ec388ef0f6e33841aeb810d7fa23f049ec4cd upstream. Commit 523e1d399ce0 ("block: make gendisk hold a reference to its queue") modified add_disk() and disk_release() but did not update any of the error paths that trigger a put_disk() call after disk->queue has been assigned. That introduced the following behavior in the pktcdvd driver if pkt_new_dev() fails: Kernel BUG at 00000000e98fd882 [verbose debug info unavailable] Since disk_release() calls blk_put_queue() anyway if disk->queue != NULL, fix this by removing the blk_cleanup_queue() call from the pkt_setup_dev() error path. Fixes: commit 523e1d399ce0 ("block: make gendisk hold a reference to its queue") Signed-off-by: Bart Van Assche <bart.vanassche(a)wdc.com> Cc: Tejun Heo <tj(a)kernel.org> Cc: Maciej S. Szmigiero <mail(a)maciej.szmigiero.name> Signed-off-by: Jens Axboe <axboe(a)kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/block/pktcdvd.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) --- a/drivers/block/pktcdvd.c +++ b/drivers/block/pktcdvd.c @@ -2779,7 +2779,7 @@ static int pkt_setup_dev(dev_t dev, dev_ pd->pkt_dev = MKDEV(pktdev_major, idx); ret = pkt_new_dev(pd, dev); if (ret) - goto out_new_dev; + goto out_mem2; /* inherit events of the host device */ disk->events = pd->bdev->bd_disk->events; @@ -2797,8 +2797,6 @@ static int pkt_setup_dev(dev_t dev, dev_ mutex_unlock(&ctl_mutex); return 0; -out_new_dev: - blk_cleanup_queue(disk->queue); out_mem2: put_disk(disk); out_mem: Patches currently in stable-queue which might be from bart.vanassche(a)wdc.com are queue-4.9/pktcdvd-fix-pkt_setup_dev-error-path.patch

6 years, 11 months

1
0
0 0

Patch "pipe: actually allow root to exceed the pipe buffer limits" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled pipe: actually allow root to exceed the pipe buffer limits to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pipe-actually-allow-root-to-exceed-the-pipe-buffer-limits.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 85c2dd5473b2718b4b63e74bfeb1ca876868e11f Mon Sep 17 00:00:00 2001 From: Eric Biggers <ebiggers(a)google.com> Date: Tue, 6 Feb 2018 15:41:53 -0800 Subject: pipe: actually allow root to exceed the pipe buffer limits From: Eric Biggers <ebiggers(a)google.com> commit 85c2dd5473b2718b4b63e74bfeb1ca876868e11f upstream. pipe-user-pages-hard and pipe-user-pages-soft are only supposed to apply to unprivileged users, as documented in both Documentation/sysctl/fs.txt and the pipe(7) man page. However, the capabilities are actually only checked when increasing a pipe's size using F_SETPIPE_SZ, not when creating a new pipe. Therefore, if pipe-user-pages-hard has been set, the root user can run into it and be unable to create pipes. Similarly, if pipe-user-pages-soft has been set, the root user can run into it and have their pipes limited to 1 page each. Fix this by allowing the privileged override in both cases. Link: http://lkml.kernel.org/r/20180111052902.14409-4-ebiggers3@gmail.com Fixes: 759c01142a5d ("pipe: limit the per-user amount of pages allocated in pipes") Signed-off-by: Eric Biggers <ebiggers(a)google.com> Acked-by: Kees Cook <keescook(a)chromium.org> Acked-by: Joe Lawrence <joe.lawrence(a)redhat.com> Cc: Alexander Viro <viro(a)zeniv.linux.org.uk> Cc: "Luis R . Rodriguez" <mcgrof(a)kernel.org> Cc: Michael Kerrisk <mtk.manpages(a)gmail.com> Cc: Mikulas Patocka <mpatocka(a)redhat.com> Cc: Willy Tarreau <w(a)1wt.eu> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds(a)linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/pipe.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) --- a/fs/pipe.c +++ b/fs/pipe.c @@ -617,6 +617,11 @@ static bool too_many_pipe_buffers_hard(u return pipe_user_pages_hard && user_bufs >= pipe_user_pages_hard; } +static bool is_unprivileged_user(void) +{ + return !capable(CAP_SYS_RESOURCE) && !capable(CAP_SYS_ADMIN); +} + struct pipe_inode_info *alloc_pipe_info(void) { struct pipe_inode_info *pipe; @@ -633,12 +638,12 @@ struct pipe_inode_info *alloc_pipe_info( user_bufs = account_pipe_buffers(user, 0, pipe_bufs); - if (too_many_pipe_buffers_soft(user_bufs)) { + if (too_many_pipe_buffers_soft(user_bufs) && is_unprivileged_user()) { user_bufs = account_pipe_buffers(user, pipe_bufs, 1); pipe_bufs = 1; } - if (too_many_pipe_buffers_hard(user_bufs)) + if (too_many_pipe_buffers_hard(user_bufs) && is_unprivileged_user()) goto out_revert_acct; pipe->bufs = kcalloc(pipe_bufs, sizeof(struct pipe_buffer), @@ -1069,7 +1074,7 @@ static long pipe_set_size(struct pipe_in if (nr_pages > pipe->buffers && (too_many_pipe_buffers_hard(user_bufs) || too_many_pipe_buffers_soft(user_bufs)) && - !capable(CAP_SYS_RESOURCE) && !capable(CAP_SYS_ADMIN)) { + is_unprivileged_user()) { ret = -EPERM; goto out_revert_acct; } Patches currently in stable-queue which might be from ebiggers(a)google.com are queue-4.9/pipe-fix-off-by-one-error-when-checking-buffer-limits.patch queue-4.9/crypto-cryptd-pass-through-absence-of-setkey.patch queue-4.9/pipe-actually-allow-root-to-exceed-the-pipe-buffer-limits.patch queue-4.9/kernel-relay.c-revert-kernel-relay.c-fix-potential-memory-leak.patch queue-4.9/nfs-reject-request-for-id_legacy-key-without-auxdata.patch queue-4.9/crypto-poly1305-remove-setkey-method.patch queue-4.9/crypto-sha512-mb-initialize-pending-lengths-correctly.patch queue-4.9/crypto-hash-introduce-crypto_hash_alg_has_setkey.patch queue-4.9/crypto-mcryptd-pass-through-absence-of-setkey.patch

6 years, 11 months

1
0
0 0

Patch "pipe: fix off-by-one error when checking buffer limits" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled pipe: fix off-by-one error when checking buffer limits to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: pipe-fix-off-by-one-error-when-checking-buffer-limits.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 9903a91c763ecdae333a04a9d89d79d2b8966503 Mon Sep 17 00:00:00 2001 From: Eric Biggers <ebiggers(a)google.com> Date: Tue, 6 Feb 2018 15:41:56 -0800 Subject: pipe: fix off-by-one error when checking buffer limits From: Eric Biggers <ebiggers(a)google.com> commit 9903a91c763ecdae333a04a9d89d79d2b8966503 upstream. With pipe-user-pages-hard set to 'N', users were actually only allowed up to 'N - 1' buffers; and likewise for pipe-user-pages-soft. Fix this to allow up to 'N' buffers, as would be expected. Link: http://lkml.kernel.org/r/20180111052902.14409-5-ebiggers3@gmail.com Fixes: b0b91d18e2e9 ("pipe: fix limit checking in pipe_set_size()") Signed-off-by: Eric Biggers <ebiggers(a)google.com> Acked-by: Willy Tarreau <w(a)1wt.eu> Acked-by: Kees Cook <keescook(a)chromium.org> Acked-by: Joe Lawrence <joe.lawrence(a)redhat.com> Cc: Alexander Viro <viro(a)zeniv.linux.org.uk> Cc: "Luis R . Rodriguez" <mcgrof(a)kernel.org> Cc: Michael Kerrisk <mtk.manpages(a)gmail.com> Cc: Mikulas Patocka <mpatocka(a)redhat.com> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds(a)linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/pipe.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) --- a/fs/pipe.c +++ b/fs/pipe.c @@ -609,12 +609,12 @@ static unsigned long account_pipe_buffer static bool too_many_pipe_buffers_soft(unsigned long user_bufs) { - return pipe_user_pages_soft && user_bufs >= pipe_user_pages_soft; + return pipe_user_pages_soft && user_bufs > pipe_user_pages_soft; } static bool too_many_pipe_buffers_hard(unsigned long user_bufs) { - return pipe_user_pages_hard && user_bufs >= pipe_user_pages_hard; + return pipe_user_pages_hard && user_bufs > pipe_user_pages_hard; } static bool is_unprivileged_user(void) Patches currently in stable-queue which might be from ebiggers(a)google.com are queue-4.9/pipe-fix-off-by-one-error-when-checking-buffer-limits.patch queue-4.9/crypto-cryptd-pass-through-absence-of-setkey.patch queue-4.9/pipe-actually-allow-root-to-exceed-the-pipe-buffer-limits.patch queue-4.9/kernel-relay.c-revert-kernel-relay.c-fix-potential-memory-leak.patch queue-4.9/nfs-reject-request-for-id_legacy-key-without-auxdata.patch queue-4.9/crypto-poly1305-remove-setkey-method.patch queue-4.9/crypto-sha512-mb-initialize-pending-lengths-correctly.patch queue-4.9/crypto-hash-introduce-crypto_hash_alg_has_setkey.patch queue-4.9/crypto-mcryptd-pass-through-absence-of-setkey.patch

6 years, 11 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror February 2018