December 2017 - Linux-stable-mirror

[Linux-stable-mirror] Patch "sch_dsmark: fix invalid skb_cow() usage" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled sch_dsmark: fix invalid skb_cow() usage to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: sch_dsmark-fix-invalid-skb_cow-usage.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Dec 21 09:02:40 CET 2017 From: Eric Dumazet <edumazet(a)google.com> Date: Fri, 17 Mar 2017 08:05:28 -0700 Subject: sch_dsmark: fix invalid skb_cow() usage From: Eric Dumazet <edumazet(a)google.com> [ Upstream commit aea92fb2e09e29653b023d4254ac9fbf94221538 ] skb_cow(skb, sizeof(ip header)) is not very helpful in this context. First we need to use pskb_may_pull() to make sure the ip header is in skb linear part, then use skb_try_make_writable() to address clones issues. Fixes: 4c30719f4f55 ("[PKT_SCHED] dsmark: handle cloned and non-linear skb's") Signed-off-by: Eric Dumazet <edumazet(a)google.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- net/sched/sch_dsmark.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) --- a/net/sched/sch_dsmark.c +++ b/net/sched/sch_dsmark.c @@ -200,9 +200,13 @@ static int dsmark_enqueue(struct sk_buff pr_debug("%s(skb %p,sch %p,[qdisc %p])\n", __func__, skb, sch, p); if (p->set_tc_index) { + int wlen = skb_network_offset(skb); + switch (tc_skb_protocol(skb)) { case htons(ETH_P_IP): - if (skb_cow_head(skb, sizeof(struct iphdr))) + wlen += sizeof(struct iphdr); + if (!pskb_may_pull(skb, wlen) || + skb_try_make_writable(skb, wlen)) goto drop; skb->tc_index = ipv4_get_dsfield(ip_hdr(skb)) @@ -210,7 +214,9 @@ static int dsmark_enqueue(struct sk_buff break; case htons(ETH_P_IPV6): - if (skb_cow_head(skb, sizeof(struct ipv6hdr))) + wlen += sizeof(struct ipv6hdr); + if (!pskb_may_pull(skb, wlen) || + skb_try_make_writable(skb, wlen)) goto drop; skb->tc_index = ipv6_get_dsfield(ipv6_hdr(skb)) Patches currently in stable-queue which might be from edumazet(a)google.com are queue-4.9/sch_dsmark-fix-invalid-skb_cow-usage.patch queue-4.9/inet-frag-release-spinlock-before-calling-icmp_send.patch queue-4.9/net-do-not-allow-negative-values-for-busy_read-and-busy_poll-sysctl-interfaces.patch

7 years

1
0
0 0

[Linux-stable-mirror] Patch "scsi: lpfc: Fix PT2PT PRLI reject" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: lpfc: Fix PT2PT PRLI reject to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-lpfc-fix-pt2pt-prli-reject.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Dec 21 09:02:40 CET 2017 From: Dick Kennedy <dick.kennedy(a)broadcom.com> Date: Thu, 23 Mar 2017 08:47:18 -0400 Subject: scsi: lpfc: Fix PT2PT PRLI reject From: Dick Kennedy <dick.kennedy(a)broadcom.com> [ Upstream commit a71e3cdcfce4880a4578915e110e3eaed1659765 ] lpfc cannot establish connection with targets that send PRLI in P2P configurations. If lpfc rejects a PRLI that is sent from a target the target will not resend and will reject the PRLI send from the initiator. [mkp: applied by hand] Signed-off-by: Dick Kennedy <dick.kennedy(a)broadcom.com> Signed-off-by: James Smart <james.smart(a)broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/lpfc/lpfc_els.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) --- a/drivers/scsi/lpfc/lpfc_els.c +++ b/drivers/scsi/lpfc/lpfc_els.c @@ -7782,7 +7782,8 @@ lpfc_els_unsol_buffer(struct lpfc_hba *p did, vport->port_state, ndlp->nlp_flag); phba->fc_stat.elsRcvPRLI++; - if (vport->port_state < LPFC_DISC_AUTH) { + if ((vport->port_state < LPFC_DISC_AUTH) && + (vport->fc_flag & FC_FABRIC)) { rjt_err = LSRJT_UNABLE_TPC; rjt_exp = LSEXP_NOTHING_MORE; break; Patches currently in stable-queue which might be from dick.kennedy(a)broadcom.com are queue-4.9/scsi-lpfc-fix-pt2pt-prli-reject.patch queue-4.9/scsi-lpfc-plogi-failures-during-npiv-testing.patch queue-4.9/scsi-lpfc-fix-secure-firmware-updates.patch

7 years

1
0
0 0

[Linux-stable-mirror] Patch "scsi: cxgb4i: fix Tx skb leak" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled scsi: cxgb4i: fix Tx skb leak to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: scsi-cxgb4i-fix-tx-skb-leak.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Dec 21 09:02:40 CET 2017 From: Varun Prakash <varun(a)chelsio.com> Date: Wed, 11 Oct 2017 19:33:07 +0530 Subject: scsi: cxgb4i: fix Tx skb leak From: Varun Prakash <varun(a)chelsio.com> [ Upstream commit 9b3a081fb62158b50bcc90522ca2423017544367 ] In case of connection reset Tx skb queue can have some skbs which are not transmitted so purge Tx skb queue in release_offload_resources() to avoid skb leak. Signed-off-by: Varun Prakash <varun(a)chelsio.com> Signed-off-by: Martin K. Petersen <martin.petersen(a)oracle.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/scsi/cxgbi/cxgb4i/cxgb4i.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c +++ b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c @@ -1347,6 +1347,7 @@ static void release_offload_resources(st csk, csk->state, csk->flags, csk->tid); cxgbi_sock_free_cpl_skbs(csk); + cxgbi_sock_purge_write_queue(csk); if (csk->wr_cred != csk->wr_max_cred) { cxgbi_sock_purge_wr_queue(csk); cxgbi_sock_reset_wr_list(csk); Patches currently in stable-queue which might be from varun(a)chelsio.com are queue-4.9/scsi-cxgb4i-fix-tx-skb-leak.patch

7 years

1
0
0 0

[Linux-stable-mirror] Patch "s390/qeth: size calculation outbound buffers" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled s390/qeth: size calculation outbound buffers to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: s390-qeth-size-calculation-outbound-buffers.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Dec 21 09:02:40 CET 2017 From: Julian Wiedmann <jwi(a)linux.vnet.ibm.com> Date: Thu, 23 Mar 2017 14:55:08 +0100 Subject: s390/qeth: size calculation outbound buffers From: Julian Wiedmann <jwi(a)linux.vnet.ibm.com> [ Upstream commit 7d969d2e8890f546c8cec634b3aa5f57d4eef883 ] Depending on the device type, hard_start_xmit() builds different output buffer formats. For instance with HiperSockets, on both L2 and L3 we strip the ETH header from the skb - L3 doesn't need it, and L2 carries it in the buffer's header element. For this, we pass data_offset = ETH_HLEN all the way down to __qeth_fill_buffer(), where skb->data is then adjusted accordingly. But the initial size calculation still considers the *full* skb length (including the ETH header). So qeth_get_elements_no() can erroneously reject a skb as too big, even though it would actually fit into an output buffer once the ETH header has been trimmed off later. Fix this by passing an additional offset to qeth_get_elements_no(), that indicates where in the skb the on-wire data actually begins. Since the current code uses data_offset=-1 for some special handling on OSA, we need to clamp data_offset to 0... On HiperSockets this helps when sending ~MTU-size skbs with weird page alignment. No change for OSA or AF_IUCV. Signed-off-by: Julian Wiedmann <jwi(a)linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun(a)linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/s390/net/qeth_core.h | 3 ++- drivers/s390/net/qeth_core_main.c | 5 +++-- drivers/s390/net/qeth_l2_main.c | 5 +++-- drivers/s390/net/qeth_l3_main.c | 5 +++-- 4 files changed, 11 insertions(+), 7 deletions(-) --- a/drivers/s390/net/qeth_core.h +++ b/drivers/s390/net/qeth_core.h @@ -969,7 +969,8 @@ int qeth_bridgeport_query_ports(struct q int qeth_bridgeport_setrole(struct qeth_card *card, enum qeth_sbp_roles role); int qeth_bridgeport_an_set(struct qeth_card *card, int enable); int qeth_get_priority_queue(struct qeth_card *, struct sk_buff *, int, int); -int qeth_get_elements_no(struct qeth_card *, struct sk_buff *, int); +int qeth_get_elements_no(struct qeth_card *card, struct sk_buff *skb, + int extra_elems, int data_offset); int qeth_get_elements_for_frags(struct sk_buff *); int qeth_do_send_packet_fast(struct qeth_card *, struct qeth_qdio_out_q *, struct sk_buff *, struct qeth_hdr *, int, int, int); --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -3842,6 +3842,7 @@ EXPORT_SYMBOL_GPL(qeth_get_elements_for_ * @card: qeth card structure, to check max. elems. * @skb: SKB address * @extra_elems: extra elems needed, to check against max. + * @data_offset: range starts at skb->data + data_offset * * Returns the number of pages, and thus QDIO buffer elements, needed to cover * skb data, including linear part and fragments. Checks if the result plus @@ -3849,10 +3850,10 @@ EXPORT_SYMBOL_GPL(qeth_get_elements_for_ * Note: extra_elems is not included in the returned result. */ int qeth_get_elements_no(struct qeth_card *card, - struct sk_buff *skb, int extra_elems) + struct sk_buff *skb, int extra_elems, int data_offset) { int elements = qeth_get_elements_for_range( - (addr_t)skb->data, + (addr_t)skb->data + data_offset, (addr_t)skb->data + skb_headlen(skb)) + qeth_get_elements_for_frags(skb); --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -865,7 +865,7 @@ static int qeth_l2_hard_start_xmit(struc * chaining we can not send long frag lists */ if ((card->info.type != QETH_CARD_TYPE_IQD) && - !qeth_get_elements_no(card, new_skb, 0)) { + !qeth_get_elements_no(card, new_skb, 0, 0)) { int lin_rc = skb_linearize(new_skb); if (card->options.performance_stats) { @@ -910,7 +910,8 @@ static int qeth_l2_hard_start_xmit(struc } } - elements = qeth_get_elements_no(card, new_skb, elements_needed); + elements = qeth_get_elements_no(card, new_skb, elements_needed, + (data_offset > 0) ? data_offset : 0); if (!elements) { if (data_offset >= 0) kmem_cache_free(qeth_core_header_cache, hdr); --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -2870,7 +2870,7 @@ static int qeth_l3_hard_start_xmit(struc */ if ((card->info.type != QETH_CARD_TYPE_IQD) && ((use_tso && !qeth_l3_get_elements_no_tso(card, new_skb, 1)) || - (!use_tso && !qeth_get_elements_no(card, new_skb, 0)))) { + (!use_tso && !qeth_get_elements_no(card, new_skb, 0, 0)))) { int lin_rc = skb_linearize(new_skb); if (card->options.performance_stats) { @@ -2912,7 +2912,8 @@ static int qeth_l3_hard_start_xmit(struc elements = use_tso ? qeth_l3_get_elements_no_tso(card, new_skb, hdr_elements) : - qeth_get_elements_no(card, new_skb, hdr_elements); + qeth_get_elements_no(card, new_skb, hdr_elements, + (data_offset > 0) ? data_offset : 0); if (!elements) { if (data_offset >= 0) kmem_cache_free(qeth_core_header_cache, hdr); Patches currently in stable-queue which might be from jwi(a)linux.vnet.ibm.com are queue-4.9/s390-qeth-size-calculation-outbound-buffers.patch queue-4.9/s390-qeth-no-eth-header-for-outbound-af_iucv.patch

7 years

1
0
0 0

[Linux-stable-mirror] Patch "s390/qeth: no ETH header for outbound AF_IUCV" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled s390/qeth: no ETH header for outbound AF_IUCV to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: s390-qeth-no-eth-header-for-outbound-af_iucv.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Dec 21 09:02:40 CET 2017 From: Julian Wiedmann <jwi(a)linux.vnet.ibm.com> Date: Thu, 23 Mar 2017 14:55:09 +0100 Subject: s390/qeth: no ETH header for outbound AF_IUCV From: Julian Wiedmann <jwi(a)linux.vnet.ibm.com> [ Upstream commit acd9776b5c45ef02d1a210969a6fcc058afb76e3 ] With AF_IUCV traffic, the skb passed to hard_start_xmit() has a 14 byte slot at skb->data, intended for an ETH header. qeth_l3_fill_af_iucv_hdr() fills this ETH header... and then immediately moves it to the skb's headroom, where it disappears and is never seen again. But it's still possible for us to return NETDEV_TX_BUSY after the skb has been modified. Since we didn't get a private copy of the skb, the next time the skb is delivered to hard_start_xmit() it no longer has the expected layout (we moved the ETH header to the headroom, so skb->data now starts at the IUCV_TRANS header). So when qeth_l3_fill_af_iucv_hdr() does another round of rebuilding, the resulting qeth header ends up all wrong. On transmission, the buffer is then rejected by the HiperSockets device with SBALF15 = x'04'. When this error is passed back to af_iucv as TX_NOTIFY_UNREACHABLE, it tears down the offending socket. As the ETH header for AF_IUCV serves no purpose, just align the code to what we do for IP traffic on L3 HiperSockets: keep the ETH header at skb->data, and pass down data_offset = ETH_HLEN to qeth_fill_buffer(). When mapping the payload into the SBAL elements, the ETH header is then stripped off. This avoids the skb manipulations in qeth_l3_fill_af_iucv_hdr(), and any buffer re-entering hard_start_xmit() after NETDEV_TX_BUSY is now processed properly. Signed-off-by: Julian Wiedmann <jwi(a)linux.vnet.ibm.com> Signed-off-by: Ursula Braun <ubraun(a)linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/s390/net/qeth_l3_main.c | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-) --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -2612,17 +2612,13 @@ static void qeth_l3_fill_af_iucv_hdr(str char daddr[16]; struct af_iucv_trans_hdr *iucv_hdr; - skb_pull(skb, 14); - card->dev->header_ops->create(skb, card->dev, 0, - card->dev->dev_addr, card->dev->dev_addr, - card->dev->addr_len); - skb_pull(skb, 14); - iucv_hdr = (struct af_iucv_trans_hdr *)skb->data; memset(hdr, 0, sizeof(struct qeth_hdr)); hdr->hdr.l3.id = QETH_HEADER_TYPE_LAYER3; hdr->hdr.l3.ext_flags = 0; - hdr->hdr.l3.length = skb->len; + hdr->hdr.l3.length = skb->len - ETH_HLEN; hdr->hdr.l3.flags = QETH_HDR_IPV6 | QETH_CAST_UNICAST; + + iucv_hdr = (struct af_iucv_trans_hdr *) (skb->data + ETH_HLEN); memset(daddr, 0, sizeof(daddr)); daddr[0] = 0xfe; daddr[1] = 0x80; @@ -2826,10 +2822,7 @@ static int qeth_l3_hard_start_xmit(struc if ((card->info.type == QETH_CARD_TYPE_IQD) && !skb_is_nonlinear(skb)) { new_skb = skb; - if (new_skb->protocol == ETH_P_AF_IUCV) - data_offset = 0; - else - data_offset = ETH_HLEN; + data_offset = ETH_HLEN; hdr = kmem_cache_alloc(qeth_core_header_cache, GFP_ATOMIC); if (!hdr) goto tx_drop; Patches currently in stable-queue which might be from jwi(a)linux.vnet.ibm.com are queue-4.9/s390-qeth-size-calculation-outbound-buffers.patch queue-4.9/s390-qeth-no-eth-header-for-outbound-af_iucv.patch

7 years

1
0
0 0

[Linux-stable-mirror] Patch "RDMA/iser: Fix possible mr leak on device removal event" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled RDMA/iser: Fix possible mr leak on device removal event to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rdma-iser-fix-possible-mr-leak-on-device-removal-event.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Dec 21 09:02:40 CET 2017 From: Sagi Grimberg <sagi(a)grimberg.me> Date: Mon, 27 Feb 2017 20:16:33 +0200 Subject: RDMA/iser: Fix possible mr leak on device removal event From: Sagi Grimberg <sagi(a)grimberg.me> [ Upstream commit ea174c9573b0e0c8bc1a7a90fe9360ccb7aa9cbb ] When the rdma device is removed, we must cleanup all the rdma resources within the DEVICE_REMOVAL event handler to let the device teardown gracefully. When this happens with live I/O, some memory regions are occupied. Thus, track them too and dereg all the mr's. We are safe with mr access by iscsi_iser_cleanup_task. Reported-by: Raju Rangoju <rajur(a)chelsio.com> Signed-off-by: Sagi Grimberg <sagi(a)grimberg.me> Reviewed-by: Max Gurtovoy <maxg(a)mellanox.com> Reviewed-by: Max Gurtovoy <maxg(a)mellanox.com> Signed-off-by: Doug Ledford <dledford(a)redhat.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/infiniband/ulp/iser/iscsi_iser.h | 2 ++ drivers/infiniband/ulp/iser/iser_verbs.c | 8 +++++--- 2 files changed, 7 insertions(+), 3 deletions(-) --- a/drivers/infiniband/ulp/iser/iscsi_iser.h +++ b/drivers/infiniband/ulp/iser/iscsi_iser.h @@ -430,6 +430,7 @@ struct iser_fr_desc { struct list_head list; struct iser_reg_resources rsc; struct iser_pi_context *pi_ctx; + struct list_head all_list; }; /** @@ -443,6 +444,7 @@ struct iser_fr_pool { struct list_head list; spinlock_t lock; int size; + struct list_head all_list; }; /** --- a/drivers/infiniband/ulp/iser/iser_verbs.c +++ b/drivers/infiniband/ulp/iser/iser_verbs.c @@ -362,6 +362,7 @@ int iser_alloc_fastreg_pool(struct ib_co int i, ret; INIT_LIST_HEAD(&fr_pool->list); + INIT_LIST_HEAD(&fr_pool->all_list); spin_lock_init(&fr_pool->lock); fr_pool->size = 0; for (i = 0; i < cmds_max; i++) { @@ -373,6 +374,7 @@ int iser_alloc_fastreg_pool(struct ib_co } list_add_tail(&desc->list, &fr_pool->list); + list_add_tail(&desc->all_list, &fr_pool->all_list); fr_pool->size++; } @@ -392,13 +394,13 @@ void iser_free_fastreg_pool(struct ib_co struct iser_fr_desc *desc, *tmp; int i = 0; - if (list_empty(&fr_pool->list)) + if (list_empty(&fr_pool->all_list)) return; iser_info("freeing conn %p fr pool\n", ib_conn); - list_for_each_entry_safe(desc, tmp, &fr_pool->list, list) { - list_del(&desc->list); + list_for_each_entry_safe(desc, tmp, &fr_pool->all_list, all_list) { + list_del(&desc->all_list); iser_free_reg_res(&desc->rsc); if (desc->pi_ctx) iser_free_pi_ctx(desc->pi_ctx); Patches currently in stable-queue which might be from sagi(a)grimberg.me are queue-4.9/nvme-loop-handle-cpu-unplug-when-re-establishing-the-controller.patch queue-4.9/ib-core-protect-against-self-requeue-of-a-cq-work-item.patch queue-4.9/rdma-iser-fix-possible-mr-leak-on-device-removal-event.patch

7 years

1
0
0 0

[Linux-stable-mirror] Patch "rtc: set the alarm to the next expiring timer" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled rtc: set the alarm to the next expiring timer to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rtc-set-the-alarm-to-the-next-expiring-timer.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Dec 21 09:02:40 CET 2017 From: Alexandre Belloni <alexandre.belloni(a)free-electrons.com> Date: Thu, 28 Sep 2017 13:53:27 +0200 Subject: rtc: set the alarm to the next expiring timer From: Alexandre Belloni <alexandre.belloni(a)free-electrons.com> [ Upstream commit 74717b28cb32e1ad3c1042cafd76b264c8c0f68d ] If there is any non expired timer in the queue, the RTC alarm is never set. This is an issue when adding a timer that expires before the next non expired timer. Ensure the RTC alarm is set in that case. Fixes: 2b2f5ff00f63 ("rtc: interface: ignore expired timers when enqueuing new timers") Signed-off-by: Alexandre Belloni <alexandre.belloni(a)free-electrons.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/rtc/interface.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/drivers/rtc/interface.c +++ b/drivers/rtc/interface.c @@ -772,7 +772,7 @@ static int rtc_timer_enqueue(struct rtc_ } timerqueue_add(&rtc->timerqueue, &timer->node); - if (!next) { + if (!next || ktime_before(timer->node.expires, next->expires)) { struct rtc_wkalrm alarm; int err; alarm.time = rtc_ktime_to_tm(timer->node.expires); Patches currently in stable-queue which might be from alexandre.belloni(a)free-electrons.com are queue-4.9/rtc-set-the-alarm-to-the-next-expiring-timer.patch queue-4.9/rtc-pl031-make-interrupt-optional.patch

7 years

1
0
0 0

[Linux-stable-mirror] Patch "rtc: pl031: make interrupt optional" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled rtc: pl031: make interrupt optional to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: rtc-pl031-make-interrupt-optional.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Dec 21 09:02:40 CET 2017 From: Russell King <rmk+kernel(a)armlinux.org.uk> Date: Fri, 29 Sep 2017 11:22:15 +0100 Subject: rtc: pl031: make interrupt optional From: Russell King <rmk+kernel(a)armlinux.org.uk> [ Upstream commit 5b64a2965dfdfca8039e93303c64e2b15c19ff0c ] On some platforms, the interrupt for the PL031 is optional. Avoid trying to claim the interrupt if it's not specified. Reviewed-by: Linus Walleij <linus.walleij(a)linaro.org> Signed-off-by: Russell King <rmk+kernel(a)armlinux.org.uk> Signed-off-by: Alexandre Belloni <alexandre.belloni(a)free-electrons.com> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/rtc/rtc-pl031.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) --- a/drivers/rtc/rtc-pl031.c +++ b/drivers/rtc/rtc-pl031.c @@ -308,7 +308,8 @@ static int pl031_remove(struct amba_devi dev_pm_clear_wake_irq(&adev->dev); device_init_wakeup(&adev->dev, false); - free_irq(adev->irq[0], ldata); + if (adev->irq[0]) + free_irq(adev->irq[0], ldata); rtc_device_unregister(ldata->rtc); iounmap(ldata->base); kfree(ldata); @@ -381,12 +382,13 @@ static int pl031_probe(struct amba_devic goto out_no_rtc; } - if (request_irq(adev->irq[0], pl031_interrupt, - vendor->irqflags, "rtc-pl031", ldata)) { - ret = -EIO; - goto out_no_irq; + if (adev->irq[0]) { + ret = request_irq(adev->irq[0], pl031_interrupt, + vendor->irqflags, "rtc-pl031", ldata); + if (ret) + goto out_no_irq; + dev_pm_set_wake_irq(&adev->dev, adev->irq[0]); } - dev_pm_set_wake_irq(&adev->dev, adev->irq[0]); return 0; out_no_irq: Patches currently in stable-queue which might be from rmk+kernel(a)armlinux.org.uk are queue-4.9/arm-dma-mapping-disallow-dma_get_sgtable-for-non-kernel-managed-memory.patch queue-4.9/rtc-pl031-make-interrupt-optional.patch

7 years

1
0
0 0

[Linux-stable-mirror] Patch "r8152: fix the rx early size of RTL8153" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled r8152: fix the rx early size of RTL8153 to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: r8152-fix-the-rx-early-size-of-rtl8153.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Dec 21 09:02:40 CET 2017 From: hayeswang <hayeswang(a)realtek.com> Date: Mon, 20 Mar 2017 16:13:45 +0800 Subject: r8152: fix the rx early size of RTL8153 From: hayeswang <hayeswang(a)realtek.com> [ Upstream commit b20cb60e2b865638459e6ec82ad3536d3734e555 ] revert commit a59e6d815226 ("r8152: correct the rx early size") and fix the rx early size as (rx buffer size - rx packet size - rx desc size - alignment) / 4 Signed-off-by: Hayes Wang <hayeswang(a)realtek.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/usb/r8152.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -32,7 +32,7 @@ #define NETNEXT_VERSION "08" /* Information for net */ -#define NET_VERSION "8" +#define NET_VERSION "9" #define DRIVER_VERSION "v1." NETNEXT_VERSION "." NET_VERSION #define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd(a)realtek.com>" @@ -501,6 +501,8 @@ enum rtl_register_content { #define RTL8153_RMS RTL8153_MAX_PACKET #define RTL8152_TX_TIMEOUT (5 * HZ) #define RTL8152_NAPI_WEIGHT 64 +#define rx_reserved_size(x) ((x) + VLAN_ETH_HLEN + CRC_SIZE + \ + sizeof(struct rx_desc) + RX_ALIGN) /* rtl8152 flags */ enum rtl8152_flags { @@ -2253,8 +2255,7 @@ static void r8153_set_rx_early_timeout(s static void r8153_set_rx_early_size(struct r8152 *tp) { - u32 mtu = tp->netdev->mtu; - u32 ocp_data = (agg_buf_sz - mtu - VLAN_ETH_HLEN - VLAN_HLEN) / 8; + u32 ocp_data = (agg_buf_sz - rx_reserved_size(tp->netdev->mtu)) / 4; ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE, ocp_data); } Patches currently in stable-queue which might be from hayeswang(a)realtek.com are queue-4.9/r8152-fix-the-list-rx_done-may-be-used-without-initialization.patch queue-4.9/r8152-prevent-the-driver-from-transmitting-packets-with-carrier-off.patch queue-4.9/r8152-fix-the-rx-early-size-of-rtl8153.patch

7 years

1
0
0 0

[Linux-stable-mirror] Patch "r8152: prevent the driver from transmitting packets with carrier off" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled r8152: prevent the driver from transmitting packets with carrier off to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: r8152-prevent-the-driver-from-transmitting-packets-with-carrier-off.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From foo@baz Thu Dec 21 09:02:40 CET 2017 From: hayeswang <hayeswang(a)realtek.com> Date: Thu, 23 Mar 2017 19:14:19 +0800 Subject: r8152: prevent the driver from transmitting packets with carrier off From: hayeswang <hayeswang(a)realtek.com> [ Upstream commit 2f25abe6bac573928a990ccbdac75873add8127e ] The linking status may be changed when autosuspend. And, after autoresume, the driver may try to transmit packets when the device is carrier off, because the interrupt transfer doesn't update the linking status, yet. And, if the device is in ALDPS mode, the device would stop working. The another similar case is 1. unplug the cable. 2. interrupt transfer queue a work_queue for linking change. 3. device enters the ALDPS mode. 4. a tx occurs before the work_queue is called. Signed-off-by: Hayes Wang <hayeswang(a)realtek.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Sasha Levin <alexander.levin(a)verizon.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/usb/r8152.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -1294,6 +1294,7 @@ static void intr_callback(struct urb *ur } } else { if (netif_carrier_ok(tp->netdev)) { + netif_stop_queue(tp->netdev); set_bit(RTL8152_LINK_CHG, &tp->flags); schedule_delayed_work(&tp->schedule, 0); } @@ -3167,6 +3168,9 @@ static void set_carrier(struct r8152 *tp napi_enable(&tp->napi); netif_wake_queue(netdev); netif_info(tp, link, netdev, "carrier on\n"); + } else if (netif_queue_stopped(netdev) && + skb_queue_len(&tp->tx_queue) < tp->tx_qlen) { + netif_wake_queue(netdev); } } else { if (netif_carrier_ok(netdev)) { @@ -3700,8 +3704,18 @@ static int rtl8152_resume(struct usb_int tp->rtl_ops.autosuspend_en(tp, false); napi_disable(&tp->napi); set_bit(WORK_ENABLE, &tp->flags); - if (netif_carrier_ok(tp->netdev)) - rtl_start_rx(tp); + + if (netif_carrier_ok(tp->netdev)) { + if (rtl8152_get_speed(tp) & LINK_STATUS) { + rtl_start_rx(tp); + } else { + netif_carrier_off(tp->netdev); + tp->rtl_ops.disable(tp); + netif_info(tp, link, tp->netdev, + "linking down\n"); + } + } + napi_enable(&tp->napi); clear_bit(SELECTIVE_SUSPEND, &tp->flags); smp_mb__after_atomic(); Patches currently in stable-queue which might be from hayeswang(a)realtek.com are queue-4.9/r8152-fix-the-list-rx_done-may-be-used-without-initialization.patch queue-4.9/r8152-prevent-the-driver-from-transmitting-packets-with-carrier-off.patch queue-4.9/r8152-fix-the-rx-early-size-of-rtl8153.patch

7 years

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror December 2017