December 2017 - Linux-stable-mirror

[Linux-stable-mirror] Patch "net: mvneta: clear interface link status on port disable" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled net: mvneta: clear interface link status on port disable to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: net-mvneta-clear-interface-link-status-on-port-disable.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 4423c18e466afdfb02a36ee8b9f901d144b3c607 Mon Sep 17 00:00:00 2001 From: Yelena Krivosheev <yelena(a)marvell.com> Date: Tue, 19 Dec 2017 17:59:45 +0100 Subject: net: mvneta: clear interface link status on port disable From: Yelena Krivosheev <yelena(a)marvell.com> commit 4423c18e466afdfb02a36ee8b9f901d144b3c607 upstream. When port connect to PHY in polling mode (with poll interval 1 sec), port and phy link status must be synchronize in order don't loss link change event. [gregory.clement(a)free-electrons.com: add fixes tag] Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by: Yelena Krivosheev <yelena(a)marvell.com> Tested-by: Dmitri Epshtein <dima(a)marvell.com> Signed-off-by: Gregory CLEMENT <gregory.clement(a)free-electrons.com> Signed-off-by: David S. Miller <davem(a)davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/net/ethernet/marvell/mvneta.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/drivers/net/ethernet/marvell/mvneta.c +++ b/drivers/net/ethernet/marvell/mvneta.c @@ -914,6 +914,10 @@ static void mvneta_port_disable(struct m val &= ~MVNETA_GMAC0_PORT_ENABLE; mvreg_write(pp, MVNETA_GMAC_CTRL_0, val); + pp->link = 0; + pp->duplex = -1; + pp->speed = 0; + udelay(200); } Patches currently in stable-queue which might be from yelena(a)marvell.com are queue-4.4/net-mvneta-clear-interface-link-status-on-port-disable.patch

7 years

1
0
0 0

[Linux-stable-mirror] Patch "parisc: Hide Diva-built-in serial aux and graphics card" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled parisc: Hide Diva-built-in serial aux and graphics card to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: parisc-hide-diva-built-in-serial-aux-and-graphics-card.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From bcf3f1752a622f1372d3252d0fea8855d89812e7 Mon Sep 17 00:00:00 2001 From: Helge Deller <deller(a)gmx.de> Date: Tue, 12 Dec 2017 21:52:26 +0100 Subject: parisc: Hide Diva-built-in serial aux and graphics card From: Helge Deller <deller(a)gmx.de> commit bcf3f1752a622f1372d3252d0fea8855d89812e7 upstream. Diva GSP card has built-in serial AUX port and ATI graphic card which simply don't work and which both don't have external connectors. User Guides even mention that those devices shouldn't be used. So, prevent that Linux drivers try to enable those devices. Signed-off-by: Helge Deller <deller(a)gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/parisc/lba_pci.c | 33 +++++++++++++++++++++++++++++++++ 1 file changed, 33 insertions(+) --- a/drivers/parisc/lba_pci.c +++ b/drivers/parisc/lba_pci.c @@ -1654,3 +1654,36 @@ void lba_set_iregs(struct parisc_device iounmap(base_addr); } + +/* + * The design of the Diva management card in rp34x0 machines (rp3410, rp3440) + * seems rushed, so that many built-in components simply don't work. + * The following quirks disable the serial AUX port and the built-in ATI RV100 + * Radeon 7000 graphics card which both don't have any external connectors and + * thus are useless, and even worse, e.g. the AUX port occupies ttyS0 and as + * such makes those machines the only PARISC machines on which we can't use + * ttyS0 as boot console. + */ +static void quirk_diva_ati_card(struct pci_dev *dev) +{ + if (dev->subsystem_vendor != PCI_VENDOR_ID_HP || + dev->subsystem_device != 0x1292) + return; + + dev_info(&dev->dev, "Hiding Diva built-in ATI card"); + dev->device = 0; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RADEON_QY, + quirk_diva_ati_card); + +static void quirk_diva_aux_disable(struct pci_dev *dev) +{ + if (dev->subsystem_vendor != PCI_VENDOR_ID_HP || + dev->subsystem_device != 0x1291) + return; + + dev_info(&dev->dev, "Hiding Diva built-in AUX serial device"); + dev->device = 0; +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_DIVA_AUX, + quirk_diva_aux_disable); Patches currently in stable-queue which might be from deller(a)gmx.de are queue-4.4/parisc-hide-diva-built-in-serial-aux-and-graphics-card.patch

7 years

1
0
0 0

[Linux-stable-mirror] Patch "mfd: twl4030-audio: Fix sibling-node lookup" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mfd: twl4030-audio: Fix sibling-node lookup to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mfd-twl4030-audio-fix-sibling-node-lookup.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 0a423772de2f3d7b00899987884f62f63ae00dcb Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan(a)kernel.org> Date: Sat, 11 Nov 2017 16:38:43 +0100 Subject: mfd: twl4030-audio: Fix sibling-node lookup From: Johan Hovold <johan(a)kernel.org> commit 0a423772de2f3d7b00899987884f62f63ae00dcb upstream. A helper purported to look up a child node based on its name was using the wrong of-helper and ended up prematurely freeing the parent of-node while leaking any matching node. To make things worse, any matching node would not even necessarily be a child node as the whole device tree was searched depth-first starting at the parent. Fixes: 019a7e6b7b31 ("mfd: twl4030-audio: Add DT support") Signed-off-by: Johan Hovold <johan(a)kernel.org> Acked-by: Peter Ujfalusi <peter.ujfalusi(a)ti.com> Signed-off-by: Lee Jones <lee.jones(a)linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/mfd/twl4030-audio.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) --- a/drivers/mfd/twl4030-audio.c +++ b/drivers/mfd/twl4030-audio.c @@ -159,13 +159,18 @@ unsigned int twl4030_audio_get_mclk(void EXPORT_SYMBOL_GPL(twl4030_audio_get_mclk); static bool twl4030_audio_has_codec(struct twl4030_audio_data *pdata, - struct device_node *node) + struct device_node *parent) { + struct device_node *node; + if (pdata && pdata->codec) return true; - if (of_find_node_by_name(node, "codec")) + node = of_get_child_by_name(parent, "codec"); + if (node) { + of_node_put(node); return true; + } return false; } Patches currently in stable-queue which might be from johan(a)kernel.org are queue-4.4/mfd-twl4030-audio-fix-sibling-node-lookup.patch queue-4.4/mfd-twl6040-fix-child-node-lookup.patch

7 years

1
0
0 0

[Linux-stable-mirror] Patch "mfd: twl6040: Fix child-node lookup" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mfd: twl6040: Fix child-node lookup to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mfd-twl6040-fix-child-node-lookup.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 85e9b13cbb130a3209f21bd7933933399c389ffe Mon Sep 17 00:00:00 2001 From: Johan Hovold <johan(a)kernel.org> Date: Sat, 11 Nov 2017 16:38:44 +0100 Subject: mfd: twl6040: Fix child-node lookup From: Johan Hovold <johan(a)kernel.org> commit 85e9b13cbb130a3209f21bd7933933399c389ffe upstream. Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. To make things worse, the parent node was prematurely freed, while the child node was leaked. Note that the CONFIG_OF compile guard can be removed as of_get_child_by_name() provides a !CONFIG_OF implementation which always fails. Fixes: 37e13cecaa14 ("mfd: Add support for Device Tree to twl6040") Fixes: ca2cad6ae38e ("mfd: Fix twl6040 build failure") Signed-off-by: Johan Hovold <johan(a)kernel.org> Acked-by: Peter Ujfalusi <peter.ujfalusi(a)ti.com> Signed-off-by: Lee Jones <lee.jones(a)linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/mfd/twl6040.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) --- a/drivers/mfd/twl6040.c +++ b/drivers/mfd/twl6040.c @@ -97,12 +97,16 @@ static struct reg_sequence twl6040_patch }; -static bool twl6040_has_vibra(struct device_node *node) +static bool twl6040_has_vibra(struct device_node *parent) { -#ifdef CONFIG_OF - if (of_find_node_by_name(node, "vibra")) + struct device_node *node; + + node = of_get_child_by_name(parent, "vibra"); + if (node) { + of_node_put(node); return true; -#endif + } + return false; } Patches currently in stable-queue which might be from johan(a)kernel.org are queue-4.4/mfd-twl4030-audio-fix-sibling-node-lookup.patch queue-4.4/mfd-twl6040-fix-child-node-lookup.patch

7 years

1
0
0 0

[Linux-stable-mirror] Patch "mfd: cros ec: spi: Don't send first message too soon" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mfd: cros ec: spi: Don't send first message too soon to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mfd-cros-ec-spi-don-t-send-first-message-too-soon.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 15d8374874ded0bec37ef27f8301a6d54032c0e5 Mon Sep 17 00:00:00 2001 From: Jon Hunter <jonathanh(a)nvidia.com> Date: Tue, 14 Nov 2017 14:43:27 +0000 Subject: mfd: cros ec: spi: Don't send first message too soon From: Jon Hunter <jonathanh(a)nvidia.com> commit 15d8374874ded0bec37ef27f8301a6d54032c0e5 upstream. On the Tegra124 Nyan-Big chromebook the very first SPI message sent to the EC is failing. The Tegra SPI driver configures the SPI chip-selects to be active-high by default (and always has for many years). The EC SPI requires an active-low chip-select and so the Tegra chip-select is reconfigured to be active-low when the EC SPI driver calls spi_setup(). The problem is that if the first SPI message to the EC is sent too soon after reconfiguring the SPI chip-select, it fails. The EC SPI driver prevents back-to-back SPI messages being sent too soon by keeping track of the time the last transfer was sent via the variable 'last_transfer_ns'. To prevent the very first transfer being sent too soon, initialise the 'last_transfer_ns' variable after calling spi_setup() and before sending the first SPI message. Signed-off-by: Jon Hunter <jonathanh(a)nvidia.com> Reviewed-by: Brian Norris <briannorris(a)chromium.org> Reviewed-by: Douglas Anderson <dianders(a)chromium.org> Acked-by: Benson Leung <bleung(a)chromium.org> Signed-off-by: Lee Jones <lee.jones(a)linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/mfd/cros_ec_spi.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/mfd/cros_ec_spi.c +++ b/drivers/mfd/cros_ec_spi.c @@ -660,6 +660,7 @@ static int cros_ec_spi_probe(struct spi_ sizeof(struct ec_response_get_protocol_info); ec_dev->dout_size = sizeof(struct ec_host_request); + ec_spi->last_transfer_ns = ktime_get_ns(); err = cros_ec_register(ec_dev); if (err) { Patches currently in stable-queue which might be from jonathanh(a)nvidia.com are queue-4.4/mfd-cros-ec-spi-don-t-send-first-message-too-soon.patch

7 years

1
0
0 0

[Linux-stable-mirror] Patch "kvm: x86: fix RSM when PCID is non-zero" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled kvm: x86: fix RSM when PCID is non-zero to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: kvm-x86-fix-rsm-when-pcid-is-non-zero.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From fae1a3e775cca8c3a9e0eb34443b310871a15a92 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini <pbonzini(a)redhat.com> Date: Thu, 21 Dec 2017 00:49:14 +0100 Subject: kvm: x86: fix RSM when PCID is non-zero From: Paolo Bonzini <pbonzini(a)redhat.com> commit fae1a3e775cca8c3a9e0eb34443b310871a15a92 upstream. rsm_load_state_64() and rsm_enter_protected_mode() load CR3, then CR4 & ~PCIDE, then CR0, then CR4. However, setting CR4.PCIDE fails if CR3[11:0] != 0. It's probably easier in the long run to replace rsm_enter_protected_mode() with an emulator callback that sets all the special registers (like KVM_SET_SREGS would do). For now, set the PCID field of CR3 only after CR4.PCIDE is 1. Reported-by: Laszlo Ersek <lersek(a)redhat.com> Tested-by: Laszlo Ersek <lersek(a)redhat.com> Fixes: 660a5d517aaab9187f93854425c4c63f4a09195c Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/kvm/emulate.c | 32 +++++++++++++++++++++++++------- 1 file changed, 25 insertions(+), 7 deletions(-) --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -2383,9 +2383,21 @@ static int rsm_load_seg_64(struct x86_em } static int rsm_enter_protected_mode(struct x86_emulate_ctxt *ctxt, - u64 cr0, u64 cr4) + u64 cr0, u64 cr3, u64 cr4) { int bad; + u64 pcid; + + /* In order to later set CR4.PCIDE, CR3[11:0] must be zero. */ + pcid = 0; + if (cr4 & X86_CR4_PCIDE) { + pcid = cr3 & 0xfff; + cr3 &= ~0xfff; + } + + bad = ctxt->ops->set_cr(ctxt, 3, cr3); + if (bad) + return X86EMUL_UNHANDLEABLE; /* * First enable PAE, long mode needs it before CR0.PG = 1 is set. @@ -2404,6 +2416,12 @@ static int rsm_enter_protected_mode(stru bad = ctxt->ops->set_cr(ctxt, 4, cr4); if (bad) return X86EMUL_UNHANDLEABLE; + if (pcid) { + bad = ctxt->ops->set_cr(ctxt, 3, cr3 | pcid); + if (bad) + return X86EMUL_UNHANDLEABLE; + } + } return X86EMUL_CONTINUE; @@ -2414,11 +2432,11 @@ static int rsm_load_state_32(struct x86_ struct desc_struct desc; struct desc_ptr dt; u16 selector; - u32 val, cr0, cr4; + u32 val, cr0, cr3, cr4; int i; cr0 = GET_SMSTATE(u32, smbase, 0x7ffc); - ctxt->ops->set_cr(ctxt, 3, GET_SMSTATE(u32, smbase, 0x7ff8)); + cr3 = GET_SMSTATE(u32, smbase, 0x7ff8); ctxt->eflags = GET_SMSTATE(u32, smbase, 0x7ff4) | X86_EFLAGS_FIXED; ctxt->_eip = GET_SMSTATE(u32, smbase, 0x7ff0); @@ -2460,14 +2478,14 @@ static int rsm_load_state_32(struct x86_ ctxt->ops->set_smbase(ctxt, GET_SMSTATE(u32, smbase, 0x7ef8)); - return rsm_enter_protected_mode(ctxt, cr0, cr4); + return rsm_enter_protected_mode(ctxt, cr0, cr3, cr4); } static int rsm_load_state_64(struct x86_emulate_ctxt *ctxt, u64 smbase) { struct desc_struct desc; struct desc_ptr dt; - u64 val, cr0, cr4; + u64 val, cr0, cr3, cr4; u32 base3; u16 selector; int i, r; @@ -2484,7 +2502,7 @@ static int rsm_load_state_64(struct x86_ ctxt->ops->set_dr(ctxt, 7, (val & DR7_VOLATILE) | DR7_FIXED_1); cr0 = GET_SMSTATE(u64, smbase, 0x7f58); - ctxt->ops->set_cr(ctxt, 3, GET_SMSTATE(u64, smbase, 0x7f50)); + cr3 = GET_SMSTATE(u64, smbase, 0x7f50); cr4 = GET_SMSTATE(u64, smbase, 0x7f48); ctxt->ops->set_smbase(ctxt, GET_SMSTATE(u32, smbase, 0x7f00)); val = GET_SMSTATE(u64, smbase, 0x7ed0); @@ -2512,7 +2530,7 @@ static int rsm_load_state_64(struct x86_ dt.address = GET_SMSTATE(u64, smbase, 0x7e68); ctxt->ops->set_gdt(ctxt, &dt); - r = rsm_enter_protected_mode(ctxt, cr0, cr4); + r = rsm_enter_protected_mode(ctxt, cr0, cr3, cr4); if (r != X86EMUL_CONTINUE) return r; Patches currently in stable-queue which might be from pbonzini(a)redhat.com are queue-4.4/kvm-x86-fix-load-rflags-w-o-the-fixed-bit.patch queue-4.4/kvm-x86-fix-rsm-when-pcid-is-non-zero.patch

7 years

1
0
0 0

[Linux-stable-mirror] Patch "KVM: X86: Fix load RFLAGS w/o the fixed bit" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled KVM: X86: Fix load RFLAGS w/o the fixed bit to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: kvm-x86-fix-load-rflags-w-o-the-fixed-bit.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From d73235d17ba63b53dc0e1051dbc10a1f1be91b71 Mon Sep 17 00:00:00 2001 From: Wanpeng Li <wanpeng.li(a)hotmail.com> Date: Thu, 7 Dec 2017 00:30:08 -0800 Subject: KVM: X86: Fix load RFLAGS w/o the fixed bit MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit From: Wanpeng Li <wanpeng.li(a)hotmail.com> commit d73235d17ba63b53dc0e1051dbc10a1f1be91b71 upstream. *** Guest State *** CR0: actual=0x0000000000000030, shadow=0x0000000060000010, gh_mask=fffffffffffffff7 CR4: actual=0x0000000000002050, shadow=0x0000000000000000, gh_mask=ffffffffffffe871 CR3 = 0x00000000fffbc000 RSP = 0x0000000000000000 RIP = 0x0000000000000000 RFLAGS=0x00000000 DR7 = 0x0000000000000400 ^^^^^^^^^^ The failed vmentry is triggered by the following testcase when ept=Y: #include <unistd.h> #include <sys/syscall.h> #include <string.h> #include <stdint.h> #include <linux/kvm.h> #include <fcntl.h> #include <sys/ioctl.h> long r[5]; int main() { r[2] = open("/dev/kvm", O_RDONLY); r[3] = ioctl(r[2], KVM_CREATE_VM, 0); r[4] = ioctl(r[3], KVM_CREATE_VCPU, 7); struct kvm_regs regs = { .rflags = 0, }; ioctl(r[4], KVM_SET_REGS, &regs); ioctl(r[4], KVM_RUN, 0); } X86 RFLAGS bit 1 is fixed set, userspace can simply clearing bit 1 of RFLAGS with KVM_SET_REGS ioctl which results in vmentry fails. This patch fixes it by oring X86_EFLAGS_FIXED during ioctl. Suggested-by: Jim Mattson <jmattson(a)google.com> Reviewed-by: David Hildenbrand <david(a)redhat.com> Reviewed-by: Quan Xu <quan.xu0(a)gmail.com> Cc: Paolo Bonzini <pbonzini(a)redhat.com> Cc: Radim Krčmář <rkrcmar(a)redhat.com> Cc: Jim Mattson <jmattson(a)google.com> Signed-off-by: Wanpeng Li <wanpeng.li(a)hotmail.com> Signed-off-by: Paolo Bonzini <pbonzini(a)redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/x86/kvm/x86.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -6941,7 +6941,7 @@ int kvm_arch_vcpu_ioctl_set_regs(struct #endif kvm_rip_write(vcpu, regs->rip); - kvm_set_rflags(vcpu, regs->rflags); + kvm_set_rflags(vcpu, regs->rflags | X86_EFLAGS_FIXED); vcpu->arch.exception.pending = false; Patches currently in stable-queue which might be from wanpeng.li(a)hotmail.com are queue-4.4/kvm-x86-fix-load-rflags-w-o-the-fixed-bit.patch

7 years

1
0
0 0

[Linux-stable-mirror] Patch "crypto: mcryptd - protect the per-CPU queue with a lock" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled crypto: mcryptd - protect the per-CPU queue with a lock to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: crypto-mcryptd-protect-the-per-cpu-queue-with-a-lock.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 9abffc6f2efe46c3564c04312e52e07622d40e51 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior <bigeasy(a)linutronix.de> Date: Thu, 30 Nov 2017 13:39:27 +0100 Subject: crypto: mcryptd - protect the per-CPU queue with a lock From: Sebastian Andrzej Siewior <bigeasy(a)linutronix.de> commit 9abffc6f2efe46c3564c04312e52e07622d40e51 upstream. mcryptd_enqueue_request() grabs the per-CPU queue struct and protects access to it with disabled preemption. Then it schedules a worker on the same CPU. The worker in mcryptd_queue_worker() guards access to the same per-CPU variable with disabled preemption. If we take CPU-hotplug into account then it is possible that between queue_work_on() and the actual invocation of the worker the CPU goes down and the worker will be scheduled on _another_ CPU. And here the preempt_disable() protection does not work anymore. The easiest thing is to add a spin_lock() to guard access to the list. Another detail: mcryptd_queue_worker() is not processing more than MCRYPTD_BATCH invocation in a row. If there are still items left, then it will invoke queue_work() to proceed with more later. *I* would suggest to simply drop that check because it does not use a system workqueue and the workqueue is already marked as "CPU_INTENSIVE". And if preemption is required then the scheduler should do it. However if queue_work() is used then the work item is marked as CPU unbound. That means it will try to run on the local CPU but it may run on another CPU as well. Especially with CONFIG_DEBUG_WQ_FORCE_RR_CPU=y. Again, the preempt_disable() won't work here but lock which was introduced will help. In order to keep work-item on the local CPU (and avoid RR) I changed it to queue_work_on(). Signed-off-by: Sebastian Andrzej Siewior <bigeasy(a)linutronix.de> Signed-off-by: Herbert Xu <herbert(a)gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- crypto/mcryptd.c | 23 ++++++++++------------- include/crypto/mcryptd.h | 1 + 2 files changed, 11 insertions(+), 13 deletions(-) --- a/crypto/mcryptd.c +++ b/crypto/mcryptd.c @@ -80,6 +80,7 @@ static int mcryptd_init_queue(struct mcr pr_debug("cpu_queue #%d %p\n", cpu, queue->cpu_queue); crypto_init_queue(&cpu_queue->queue, max_cpu_qlen); INIT_WORK(&cpu_queue->work, mcryptd_queue_worker); + spin_lock_init(&cpu_queue->q_lock); } return 0; } @@ -103,15 +104,16 @@ static int mcryptd_enqueue_request(struc int cpu, err; struct mcryptd_cpu_queue *cpu_queue; - cpu = get_cpu(); - cpu_queue = this_cpu_ptr(queue->cpu_queue); - rctx->tag.cpu = cpu; + cpu_queue = raw_cpu_ptr(queue->cpu_queue); + spin_lock(&cpu_queue->q_lock); + cpu = smp_processor_id(); + rctx->tag.cpu = smp_processor_id(); err = crypto_enqueue_request(&cpu_queue->queue, request); pr_debug("enqueue request: cpu %d cpu_queue %p request %p\n", cpu, cpu_queue, request); + spin_unlock(&cpu_queue->q_lock); queue_work_on(cpu, kcrypto_wq, &cpu_queue->work); - put_cpu(); return err; } @@ -164,16 +166,11 @@ static void mcryptd_queue_worker(struct cpu_queue = container_of(work, struct mcryptd_cpu_queue, work); i = 0; while (i < MCRYPTD_BATCH || single_task_running()) { - /* - * preempt_disable/enable is used to prevent - * being preempted by mcryptd_enqueue_request() - */ - local_bh_disable(); - preempt_disable(); + + spin_lock_bh(&cpu_queue->q_lock); backlog = crypto_get_backlog(&cpu_queue->queue); req = crypto_dequeue_request(&cpu_queue->queue); - preempt_enable(); - local_bh_enable(); + spin_unlock_bh(&cpu_queue->q_lock); if (!req) { mcryptd_opportunistic_flush(); @@ -188,7 +185,7 @@ static void mcryptd_queue_worker(struct ++i; } if (cpu_queue->queue.qlen) - queue_work(kcrypto_wq, &cpu_queue->work); + queue_work_on(smp_processor_id(), kcrypto_wq, &cpu_queue->work); } void mcryptd_flusher(struct work_struct *__work) --- a/include/crypto/mcryptd.h +++ b/include/crypto/mcryptd.h @@ -26,6 +26,7 @@ static inline struct mcryptd_ahash *__mc struct mcryptd_cpu_queue { struct crypto_queue queue; + spinlock_t q_lock; struct work_struct work; }; Patches currently in stable-queue which might be from bigeasy(a)linutronix.de are queue-4.4/crypto-mcryptd-protect-the-per-cpu-queue-with-a-lock.patch

7 years

1
0
0 0

[Linux-stable-mirror] Patch "ALSA: rawmidi: Avoid racy info ioctl via ctl device" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ALSA: rawmidi: Avoid racy info ioctl via ctl device to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: alsa-rawmidi-avoid-racy-info-ioctl-via-ctl-device.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From c1cfd9025cc394fd137a01159d74335c5ac978ce Mon Sep 17 00:00:00 2001 From: Takashi Iwai <tiwai(a)suse.de> Date: Thu, 14 Dec 2017 16:44:12 +0100 Subject: ALSA: rawmidi: Avoid racy info ioctl via ctl device From: Takashi Iwai <tiwai(a)suse.de> commit c1cfd9025cc394fd137a01159d74335c5ac978ce upstream. The rawmidi also allows to obtaining the information via ioctl of ctl API. It means that user can issue an ioctl to the rawmidi device even when it's being removed as long as the control device is present. Although the code has some protection via the global register_mutex, its range is limited to the search of the corresponding rawmidi object, and the mutex is already unlocked at accessing the rawmidi object. This may lead to a use-after-free. For avoiding it, this patch widens the application of register_mutex to the whole snd_rawmidi_info_select() function. We have another mutex per rawmidi object, but this operation isn't very hot path, so it shouldn't matter from the performance POV. Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/core/rawmidi.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) --- a/sound/core/rawmidi.c +++ b/sound/core/rawmidi.c @@ -579,15 +579,14 @@ static int snd_rawmidi_info_user(struct return 0; } -int snd_rawmidi_info_select(struct snd_card *card, struct snd_rawmidi_info *info) +static int __snd_rawmidi_info_select(struct snd_card *card, + struct snd_rawmidi_info *info) { struct snd_rawmidi *rmidi; struct snd_rawmidi_str *pstr; struct snd_rawmidi_substream *substream; - mutex_lock(&register_mutex); rmidi = snd_rawmidi_search(card, info->device); - mutex_unlock(&register_mutex); if (!rmidi) return -ENXIO; if (info->stream < 0 || info->stream > 1) @@ -603,6 +602,16 @@ int snd_rawmidi_info_select(struct snd_c } return -ENXIO; } + +int snd_rawmidi_info_select(struct snd_card *card, struct snd_rawmidi_info *info) +{ + int ret; + + mutex_lock(&register_mutex); + ret = __snd_rawmidi_info_select(card, info); + mutex_unlock(&register_mutex); + return ret; +} EXPORT_SYMBOL(snd_rawmidi_info_select); static int snd_rawmidi_info_select_user(struct snd_card *card, Patches currently in stable-queue which might be from tiwai(a)suse.de are queue-4.4/alsa-usb-audio-fix-the-missing-ctl-name-suffix-at-parsing-su.patch queue-4.4/alsa-rawmidi-avoid-racy-info-ioctl-via-ctl-device.patch queue-4.4/acpi-apei-erst-fix-missing-error-handling-in-erst_reader.patch

7 years

1
0
0 0

[Linux-stable-mirror] Patch "ALSA: usb-audio: Fix the missing ctl name suffix at parsing SU" has been added to the 4.4-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled ALSA: usb-audio: Fix the missing ctl name suffix at parsing SU to the 4.4-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: alsa-usb-audio-fix-the-missing-ctl-name-suffix-at-parsing-su.patch and it can be found in the queue-4.4 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 5a15f289ee87eaf33f13f08a4909ec99d837ec5f Mon Sep 17 00:00:00 2001 From: Takashi Iwai <tiwai(a)suse.de> Date: Mon, 18 Dec 2017 23:36:57 +0100 Subject: ALSA: usb-audio: Fix the missing ctl name suffix at parsing SU From: Takashi Iwai <tiwai(a)suse.de> commit 5a15f289ee87eaf33f13f08a4909ec99d837ec5f upstream. The commit 89b89d121ffc ("ALSA: usb-audio: Add check return value for usb_string()") added the check of the return value from snd_usb_copy_string_desc(), which is correct per se, but it introduced a regression. In the original code, either the "Clock Source", "Playback Source" or "Capture Source" suffix is added after the terminal string, while the commit changed it to add the suffix only when get_term_name() is failing. It ended up with an incorrect ctl name like "PCM" instead of "PCM Capture Source". Also, even the original code has a similar bug: when the ctl name is generated from snd_usb_copy_string_desc() for the given iSelector, it also doesn't put the suffix. This patch addresses these issues: the suffix is added always when no static mapping is found. Also the patch tries to put more comments and cleans up the if/else block for better readability in order to avoid the same pitfall again. Fixes: 89b89d121ffc ("ALSA: usb-audio: Add check return value for usb_string()") Reported-and-tested-by: Mauro Santos <registo.mailling(a)gmail.com> Signed-off-by: Takashi Iwai <tiwai(a)suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- sound/usb/mixer.c | 27 ++++++++++++++++----------- 1 file changed, 16 insertions(+), 11 deletions(-) --- a/sound/usb/mixer.c +++ b/sound/usb/mixer.c @@ -2101,20 +2101,25 @@ static int parse_audio_selector_unit(str kctl->private_value = (unsigned long)namelist; kctl->private_free = usb_mixer_selector_elem_free; - nameid = uac_selector_unit_iSelector(desc); + /* check the static mapping table at first */ len = check_mapped_name(map, kctl->id.name, sizeof(kctl->id.name)); - if (len) - ; - else if (nameid) - len = snd_usb_copy_string_desc(state, nameid, kctl->id.name, - sizeof(kctl->id.name)); - else - len = get_term_name(state, &state->oterm, - kctl->id.name, sizeof(kctl->id.name), 0); - if (!len) { - strlcpy(kctl->id.name, "USB", sizeof(kctl->id.name)); + /* no mapping ? */ + /* if iSelector is given, use it */ + nameid = uac_selector_unit_iSelector(desc); + if (nameid) + len = snd_usb_copy_string_desc(state, nameid, + kctl->id.name, + sizeof(kctl->id.name)); + /* ... or pick up the terminal name at next */ + if (!len) + len = get_term_name(state, &state->oterm, + kctl->id.name, sizeof(kctl->id.name), 0); + /* ... or use the fixed string "USB" as the last resort */ + if (!len) + strlcpy(kctl->id.name, "USB", sizeof(kctl->id.name)); + /* and add the proper suffix */ if (desc->bDescriptorSubtype == UAC2_CLOCK_SELECTOR) append_ctl_name(kctl, " Clock Source"); else if ((state->oterm.type & 0xff00) == 0x0100) Patches currently in stable-queue which might be from tiwai(a)suse.de are queue-4.4/alsa-usb-audio-fix-the-missing-ctl-name-suffix-at-parsing-su.patch queue-4.4/alsa-rawmidi-avoid-racy-info-ioctl-via-ctl-device.patch queue-4.4/acpi-apei-erst-fix-missing-error-handling-in-erst_reader.patch

7 years

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror December 2017