November 2017 - Linux-stable-mirror

[Linux-stable-mirror] Patch "nfsd: deal with revoked delegations appropriately" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled nfsd: deal with revoked delegations appropriately to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: nfsd-deal-with-revoked-delegations-appropriately.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 95da1b3a5aded124dd1bda1e3cdb876184813140 Mon Sep 17 00:00:00 2001 From: Andrew Elble <aweits(a)rit.edu> Date: Fri, 3 Nov 2017 14:06:31 -0400 Subject: nfsd: deal with revoked delegations appropriately From: Andrew Elble <aweits(a)rit.edu> commit 95da1b3a5aded124dd1bda1e3cdb876184813140 upstream. If a delegation has been revoked by the server, operations using that delegation should error out with NFS4ERR_DELEG_REVOKED in the >4.1 case, and NFS4ERR_BAD_STATEID otherwise. The server needs NFSv4.1 clients to explicitly free revoked delegations. If the server returns NFS4ERR_DELEG_REVOKED, the client will do that; otherwise it may just forget about the delegation and be unable to recover when it later sees SEQ4_STATUS_RECALLABLE_STATE_REVOKED set on a SEQUENCE reply. That can cause the Linux 4.1 client to loop in its stage manager. Signed-off-by: Andrew Elble <aweits(a)rit.edu> Reviewed-by: Trond Myklebust <trond.myklebust(a)primarydata.com> Signed-off-by: J. Bruce Fields <bfields(a)redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/nfsd/nfs4state.c | 25 ++++++++++++++++++++++++- 1 file changed, 24 insertions(+), 1 deletion(-) --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -3967,7 +3967,8 @@ static struct nfs4_delegation *find_dele { struct nfs4_stid *ret; - ret = find_stateid_by_type(cl, s, NFS4_DELEG_STID); + ret = find_stateid_by_type(cl, s, + NFS4_DELEG_STID|NFS4_REVOKED_DELEG_STID); if (!ret) return NULL; return delegstateid(ret); @@ -3990,6 +3991,12 @@ nfs4_check_deleg(struct nfs4_client *cl, deleg = find_deleg_stateid(cl, &open->op_delegate_stateid); if (deleg == NULL) goto out; + if (deleg->dl_stid.sc_type == NFS4_REVOKED_DELEG_STID) { + nfs4_put_stid(&deleg->dl_stid); + if (cl->cl_minorversion) + status = nfserr_deleg_revoked; + goto out; + } flags = share_access_to_flags(open->op_share_access); status = nfs4_check_delegmode(deleg, flags); if (status) { @@ -4858,6 +4865,16 @@ nfsd4_lookup_stateid(struct nfsd4_compou struct nfs4_stid **s, struct nfsd_net *nn) { __be32 status; + bool return_revoked = false; + + /* + * only return revoked delegations if explicitly asked. + * otherwise we report revoked or bad_stateid status. + */ + if (typemask & NFS4_REVOKED_DELEG_STID) + return_revoked = true; + else if (typemask & NFS4_DELEG_STID) + typemask |= NFS4_REVOKED_DELEG_STID; if (ZERO_STATEID(stateid) || ONE_STATEID(stateid)) return nfserr_bad_stateid; @@ -4872,6 +4889,12 @@ nfsd4_lookup_stateid(struct nfsd4_compou *s = find_stateid_by_type(cstate->clp, stateid, typemask); if (!*s) return nfserr_bad_stateid; + if (((*s)->sc_type == NFS4_REVOKED_DELEG_STID) && !return_revoked) { + nfs4_put_stid(*s); + if (cstate->minorversion) + return nfserr_deleg_revoked; + return nfserr_bad_stateid; + } return nfs_ok; } Patches currently in stable-queue which might be from aweits(a)rit.edu are queue-4.9/nfsd-deal-with-revoked-delegations-appropriately.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "nfs: Fix ugly referral attributes" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled nfs: Fix ugly referral attributes to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: nfs-fix-ugly-referral-attributes.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From c05cefcc72416a37eba5a2b35f0704ed758a9145 Mon Sep 17 00:00:00 2001 From: Chuck Lever <chuck.lever(a)oracle.com> Date: Sun, 5 Nov 2017 15:45:22 -0500 Subject: nfs: Fix ugly referral attributes From: Chuck Lever <chuck.lever(a)oracle.com> commit c05cefcc72416a37eba5a2b35f0704ed758a9145 upstream. Before traversing a referral and performing a mount, the mounted-on directory looks strange: dr-xr-xr-x. 2 4294967294 4294967294 0 Dec 31 1969 dir.0 nfs4_get_referral is wiping out any cached attributes with what was returned via GETATTR(fs_locations), but the bit mask for that operation does not request any file attributes. Retrieve owner and timestamp information so that the memcpy in nfs4_get_referral fills in more attributes. Changes since v1: - Don't request attributes that the client unconditionally replaces - Request only MOUNTED_ON_FILEID or FILEID attribute, not both - encode_fs_locations() doesn't use the third bitmask word Fixes: 6b97fd3da1ea ("NFSv4: Follow a referral") Suggested-by: Pradeep Thomas <pradeepthomas(a)gmail.com> Signed-off-by: Chuck Lever <chuck.lever(a)oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker(a)Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/nfs/nfs4proc.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -256,15 +256,12 @@ const u32 nfs4_fsinfo_bitmap[3] = { FATT }; const u32 nfs4_fs_locations_bitmap[3] = { - FATTR4_WORD0_TYPE - | FATTR4_WORD0_CHANGE + FATTR4_WORD0_CHANGE | FATTR4_WORD0_SIZE | FATTR4_WORD0_FSID | FATTR4_WORD0_FILEID | FATTR4_WORD0_FS_LOCATIONS, - FATTR4_WORD1_MODE - | FATTR4_WORD1_NUMLINKS - | FATTR4_WORD1_OWNER + FATTR4_WORD1_OWNER | FATTR4_WORD1_OWNER_GROUP | FATTR4_WORD1_RAWDEV | FATTR4_WORD1_SPACE_USED @@ -6678,9 +6675,7 @@ static int _nfs4_proc_fs_locations(struc struct page *page) { struct nfs_server *server = NFS_SERVER(dir); - u32 bitmask[3] = { - [0] = FATTR4_WORD0_FSID | FATTR4_WORD0_FS_LOCATIONS, - }; + u32 bitmask[3]; struct nfs4_fs_locations_arg args = { .dir_fh = NFS_FH(dir), .name = name, @@ -6699,12 +6694,15 @@ static int _nfs4_proc_fs_locations(struc dprintk("%s: start\n", __func__); + bitmask[0] = nfs4_fattr_bitmap[0] | FATTR4_WORD0_FS_LOCATIONS; + bitmask[1] = nfs4_fattr_bitmap[1]; + /* Ask for the fileid of the absent filesystem if mounted_on_fileid * is not supported */ if (NFS_SERVER(dir)->attr_bitmask[1] & FATTR4_WORD1_MOUNTED_ON_FILEID) - bitmask[1] |= FATTR4_WORD1_MOUNTED_ON_FILEID; + bitmask[0] &= ~FATTR4_WORD0_FILEID; else - bitmask[0] |= FATTR4_WORD0_FILEID; + bitmask[1] &= ~FATTR4_WORD1_MOUNTED_ON_FILEID; nfs_fattr_init(&fs_locations->fattr); fs_locations->server = server; Patches currently in stable-queue which might be from chuck.lever(a)oracle.com are queue-4.9/nfs-fix-ugly-referral-attributes.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "NFS: Fix typo in nomigration mount option" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled NFS: Fix typo in nomigration mount option to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: nfs-fix-typo-in-nomigration-mount-option.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From f02fee227e5f21981152850744a6084ff3fa94ee Mon Sep 17 00:00:00 2001 From: Joshua Watt <jpewhacker(a)gmail.com> Date: Tue, 7 Nov 2017 16:25:47 -0600 Subject: NFS: Fix typo in nomigration mount option From: Joshua Watt <jpewhacker(a)gmail.com> commit f02fee227e5f21981152850744a6084ff3fa94ee upstream. The option was incorrectly masking off all other options. Signed-off-by: Joshua Watt <JPEWhacker(a)gmail.com> Signed-off-by: Anna Schumaker <Anna.Schumaker(a)Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/nfs/super.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -1339,7 +1339,7 @@ static int nfs_parse_mount_options(char mnt->options |= NFS_OPTION_MIGRATION; break; case Opt_nomigration: - mnt->options &= NFS_OPTION_MIGRATION; + mnt->options &= ~NFS_OPTION_MIGRATION; break; /* Patches currently in stable-queue which might be from jpewhacker(a)gmail.com are queue-4.9/nfs-fix-typo-in-nomigration-mount-option.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "NFS: Avoid RCU usage in tracepoints" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled NFS: Avoid RCU usage in tracepoints to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: nfs-avoid-rcu-usage-in-tracepoints.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 3944369db701f075092357b511fd9f5755771585 Mon Sep 17 00:00:00 2001 From: Anna Schumaker <Anna.Schumaker(a)Netapp.com> Date: Wed, 1 Nov 2017 15:48:43 -0400 Subject: NFS: Avoid RCU usage in tracepoints From: Anna Schumaker <Anna.Schumaker(a)Netapp.com> commit 3944369db701f075092357b511fd9f5755771585 upstream. There isn't an obvious way to acquire and release the RCU lock during a tracepoint, so we can't use the rpc_peeraddr2str() function here. Instead, rely on the client's cl_hostname, which should have similar enough information without needing an rcu_dereference(). Reported-by: Dave Jones <davej(a)codemonkey.org.uk> Signed-off-by: Anna Schumaker <Anna.Schumaker(a)Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- fs/nfs/nfs4trace.h | 24 ++++++------------------ 1 file changed, 6 insertions(+), 18 deletions(-) --- a/fs/nfs/nfs4trace.h +++ b/fs/nfs/nfs4trace.h @@ -201,17 +201,13 @@ DECLARE_EVENT_CLASS(nfs4_clientid_event, TP_ARGS(clp, error), TP_STRUCT__entry( - __string(dstaddr, - rpc_peeraddr2str(clp->cl_rpcclient, - RPC_DISPLAY_ADDR)) + __string(dstaddr, clp->cl_hostname) __field(int, error) ), TP_fast_assign( __entry->error = error; - __assign_str(dstaddr, - rpc_peeraddr2str(clp->cl_rpcclient, - RPC_DISPLAY_ADDR)); + __assign_str(dstaddr, clp->cl_hostname); ), TP_printk( @@ -1103,9 +1099,7 @@ DECLARE_EVENT_CLASS(nfs4_inode_callback_ __field(dev_t, dev) __field(u32, fhandle) __field(u64, fileid) - __string(dstaddr, clp ? - rpc_peeraddr2str(clp->cl_rpcclient, - RPC_DISPLAY_ADDR) : "unknown") + __string(dstaddr, clp ? clp->cl_hostname : "unknown") ), TP_fast_assign( @@ -1118,9 +1112,7 @@ DECLARE_EVENT_CLASS(nfs4_inode_callback_ __entry->fileid = 0; __entry->dev = 0; } - __assign_str(dstaddr, clp ? - rpc_peeraddr2str(clp->cl_rpcclient, - RPC_DISPLAY_ADDR) : "unknown") + __assign_str(dstaddr, clp ? clp->cl_hostname : "unknown") ), TP_printk( @@ -1162,9 +1154,7 @@ DECLARE_EVENT_CLASS(nfs4_inode_stateid_c __field(dev_t, dev) __field(u32, fhandle) __field(u64, fileid) - __string(dstaddr, clp ? - rpc_peeraddr2str(clp->cl_rpcclient, - RPC_DISPLAY_ADDR) : "unknown") + __string(dstaddr, clp ? clp->cl_hostname : "unknown") __field(int, stateid_seq) __field(u32, stateid_hash) ), @@ -1179,9 +1169,7 @@ DECLARE_EVENT_CLASS(nfs4_inode_stateid_c __entry->fileid = 0; __entry->dev = 0; } - __assign_str(dstaddr, clp ? - rpc_peeraddr2str(clp->cl_rpcclient, - RPC_DISPLAY_ADDR) : "unknown") + __assign_str(dstaddr, clp ? clp->cl_hostname : "unknown") __entry->stateid_seq = be32_to_cpu(stateid->seqid); __entry->stateid_hash = Patches currently in stable-queue which might be from Anna.Schumaker(a)Netapp.com are queue-4.9/nfs-avoid-rcu-usage-in-tracepoints.patch queue-4.9/nfs-fix-ugly-referral-attributes.patch queue-4.9/nfs-fix-typo-in-nomigration-mount-option.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "mtd: nand: omap2: Fix subpage write" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mtd: nand: omap2: Fix subpage write to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mtd-nand-omap2-fix-subpage-write.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 739c64414f01748a36e7d82c8e0611dea94412bd Mon Sep 17 00:00:00 2001 From: Roger Quadros <rogerq(a)ti.com> Date: Fri, 20 Oct 2017 15:16:21 +0300 Subject: mtd: nand: omap2: Fix subpage write From: Roger Quadros <rogerq(a)ti.com> commit 739c64414f01748a36e7d82c8e0611dea94412bd upstream. Since v4.12, NAND subpage writes were causing a NULL pointer dereference on OMAP platforms (omap2-nand) using OMAP_ECC_BCH4_CODE_HW, OMAP_ECC_BCH8_CODE_HW and OMAP_ECC_BCH16_CODE_HW. This is because for those ECC modes, omap_calculate_ecc_bch() generates ECC bytes for the entire (multi-sector) page and this can overflow the ECC buffer provided by nand_write_subpage_hwecc() as it expects ecc.calculate() to return ECC bytes for just one sector. However, the root cause of the problem is present since v3.9 but was not seen then as NAND buffers were being allocated as one big chunk prior to commit 3deb9979c731 ("mtd: nand: allocate aligned buffers if NAND_OWN_BUFFERS is unset"). Fix the issue by providing a OMAP optimized write_subpage() implementation. Fixes: 62116e5171e0 ("mtd: nand: omap2: Support for hardware BCH error correction.") Signed-off-by: Roger Quadros <rogerq(a)ti.com> Signed-off-by: Boris Brezillon <boris.brezillon(a)free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/mtd/nand/omap2.c | 339 +++++++++++++++++++++++++++++++---------------- 1 file changed, 224 insertions(+), 115 deletions(-) --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -1133,129 +1133,172 @@ static u8 bch8_polynomial[] = {0xef, 0x 0x97, 0x79, 0xe5, 0x24, 0xb5}; /** - * omap_calculate_ecc_bch - Generate bytes of ECC bytes + * _omap_calculate_ecc_bch - Generate ECC bytes for one sector * @mtd: MTD device structure * @dat: The pointer to data on which ecc is computed * @ecc_code: The ecc_code buffer + * @i: The sector number (for a multi sector page) * - * Support calculating of BCH4/8 ecc vectors for the page + * Support calculating of BCH4/8/16 ECC vectors for one sector + * within a page. Sector number is in @i. */ -static int __maybe_unused omap_calculate_ecc_bch(struct mtd_info *mtd, - const u_char *dat, u_char *ecc_calc) +static int _omap_calculate_ecc_bch(struct mtd_info *mtd, + const u_char *dat, u_char *ecc_calc, int i) { struct omap_nand_info *info = mtd_to_omap(mtd); int eccbytes = info->nand.ecc.bytes; struct gpmc_nand_regs *gpmc_regs = &info->reg; u8 *ecc_code; - unsigned long nsectors, bch_val1, bch_val2, bch_val3, bch_val4; + unsigned long bch_val1, bch_val2, bch_val3, bch_val4; u32 val; - int i, j; + int j; + + ecc_code = ecc_calc; + switch (info->ecc_opt) { + case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: + case OMAP_ECC_BCH8_CODE_HW: + bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]); + bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]); + bch_val3 = readl(gpmc_regs->gpmc_bch_result2[i]); + bch_val4 = readl(gpmc_regs->gpmc_bch_result3[i]); + *ecc_code++ = (bch_val4 & 0xFF); + *ecc_code++ = ((bch_val3 >> 24) & 0xFF); + *ecc_code++ = ((bch_val3 >> 16) & 0xFF); + *ecc_code++ = ((bch_val3 >> 8) & 0xFF); + *ecc_code++ = (bch_val3 & 0xFF); + *ecc_code++ = ((bch_val2 >> 24) & 0xFF); + *ecc_code++ = ((bch_val2 >> 16) & 0xFF); + *ecc_code++ = ((bch_val2 >> 8) & 0xFF); + *ecc_code++ = (bch_val2 & 0xFF); + *ecc_code++ = ((bch_val1 >> 24) & 0xFF); + *ecc_code++ = ((bch_val1 >> 16) & 0xFF); + *ecc_code++ = ((bch_val1 >> 8) & 0xFF); + *ecc_code++ = (bch_val1 & 0xFF); + break; + case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: + case OMAP_ECC_BCH4_CODE_HW: + bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]); + bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]); + *ecc_code++ = ((bch_val2 >> 12) & 0xFF); + *ecc_code++ = ((bch_val2 >> 4) & 0xFF); + *ecc_code++ = ((bch_val2 & 0xF) << 4) | + ((bch_val1 >> 28) & 0xF); + *ecc_code++ = ((bch_val1 >> 20) & 0xFF); + *ecc_code++ = ((bch_val1 >> 12) & 0xFF); + *ecc_code++ = ((bch_val1 >> 4) & 0xFF); + *ecc_code++ = ((bch_val1 & 0xF) << 4); + break; + case OMAP_ECC_BCH16_CODE_HW: + val = readl(gpmc_regs->gpmc_bch_result6[i]); + ecc_code[0] = ((val >> 8) & 0xFF); + ecc_code[1] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result5[i]); + ecc_code[2] = ((val >> 24) & 0xFF); + ecc_code[3] = ((val >> 16) & 0xFF); + ecc_code[4] = ((val >> 8) & 0xFF); + ecc_code[5] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result4[i]); + ecc_code[6] = ((val >> 24) & 0xFF); + ecc_code[7] = ((val >> 16) & 0xFF); + ecc_code[8] = ((val >> 8) & 0xFF); + ecc_code[9] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result3[i]); + ecc_code[10] = ((val >> 24) & 0xFF); + ecc_code[11] = ((val >> 16) & 0xFF); + ecc_code[12] = ((val >> 8) & 0xFF); + ecc_code[13] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result2[i]); + ecc_code[14] = ((val >> 24) & 0xFF); + ecc_code[15] = ((val >> 16) & 0xFF); + ecc_code[16] = ((val >> 8) & 0xFF); + ecc_code[17] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result1[i]); + ecc_code[18] = ((val >> 24) & 0xFF); + ecc_code[19] = ((val >> 16) & 0xFF); + ecc_code[20] = ((val >> 8) & 0xFF); + ecc_code[21] = ((val >> 0) & 0xFF); + val = readl(gpmc_regs->gpmc_bch_result0[i]); + ecc_code[22] = ((val >> 24) & 0xFF); + ecc_code[23] = ((val >> 16) & 0xFF); + ecc_code[24] = ((val >> 8) & 0xFF); + ecc_code[25] = ((val >> 0) & 0xFF); + break; + default: + return -EINVAL; + } + + /* ECC scheme specific syndrome customizations */ + switch (info->ecc_opt) { + case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: + /* Add constant polynomial to remainder, so that + * ECC of blank pages results in 0x0 on reading back + */ + for (j = 0; j < eccbytes; j++) + ecc_calc[j] ^= bch4_polynomial[j]; + break; + case OMAP_ECC_BCH4_CODE_HW: + /* Set 8th ECC byte as 0x0 for ROM compatibility */ + ecc_calc[eccbytes - 1] = 0x0; + break; + case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: + /* Add constant polynomial to remainder, so that + * ECC of blank pages results in 0x0 on reading back + */ + for (j = 0; j < eccbytes; j++) + ecc_calc[j] ^= bch8_polynomial[j]; + break; + case OMAP_ECC_BCH8_CODE_HW: + /* Set 14th ECC byte as 0x0 for ROM compatibility */ + ecc_calc[eccbytes - 1] = 0x0; + break; + case OMAP_ECC_BCH16_CODE_HW: + break; + default: + return -EINVAL; + } + + return 0; +} + +/** + * omap_calculate_ecc_bch_sw - ECC generator for sector for SW based correction + * @mtd: MTD device structure + * @dat: The pointer to data on which ecc is computed + * @ecc_code: The ecc_code buffer + * + * Support calculating of BCH4/8/16 ECC vectors for one sector. This is used + * when SW based correction is required as ECC is required for one sector + * at a time. + */ +static int omap_calculate_ecc_bch_sw(struct mtd_info *mtd, + const u_char *dat, u_char *ecc_calc) +{ + return _omap_calculate_ecc_bch(mtd, dat, ecc_calc, 0); +} + +/** + * omap_calculate_ecc_bch_multi - Generate ECC for multiple sectors + * @mtd: MTD device structure + * @dat: The pointer to data on which ecc is computed + * @ecc_code: The ecc_code buffer + * + * Support calculating of BCH4/8/16 ecc vectors for the entire page in one go. + */ +static int omap_calculate_ecc_bch_multi(struct mtd_info *mtd, + const u_char *dat, u_char *ecc_calc) +{ + struct omap_nand_info *info = mtd_to_omap(mtd); + int eccbytes = info->nand.ecc.bytes; + unsigned long nsectors; + int i, ret; nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1; for (i = 0; i < nsectors; i++) { - ecc_code = ecc_calc; - switch (info->ecc_opt) { - case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: - case OMAP_ECC_BCH8_CODE_HW: - bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]); - bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]); - bch_val3 = readl(gpmc_regs->gpmc_bch_result2[i]); - bch_val4 = readl(gpmc_regs->gpmc_bch_result3[i]); - *ecc_code++ = (bch_val4 & 0xFF); - *ecc_code++ = ((bch_val3 >> 24) & 0xFF); - *ecc_code++ = ((bch_val3 >> 16) & 0xFF); - *ecc_code++ = ((bch_val3 >> 8) & 0xFF); - *ecc_code++ = (bch_val3 & 0xFF); - *ecc_code++ = ((bch_val2 >> 24) & 0xFF); - *ecc_code++ = ((bch_val2 >> 16) & 0xFF); - *ecc_code++ = ((bch_val2 >> 8) & 0xFF); - *ecc_code++ = (bch_val2 & 0xFF); - *ecc_code++ = ((bch_val1 >> 24) & 0xFF); - *ecc_code++ = ((bch_val1 >> 16) & 0xFF); - *ecc_code++ = ((bch_val1 >> 8) & 0xFF); - *ecc_code++ = (bch_val1 & 0xFF); - break; - case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: - case OMAP_ECC_BCH4_CODE_HW: - bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]); - bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]); - *ecc_code++ = ((bch_val2 >> 12) & 0xFF); - *ecc_code++ = ((bch_val2 >> 4) & 0xFF); - *ecc_code++ = ((bch_val2 & 0xF) << 4) | - ((bch_val1 >> 28) & 0xF); - *ecc_code++ = ((bch_val1 >> 20) & 0xFF); - *ecc_code++ = ((bch_val1 >> 12) & 0xFF); - *ecc_code++ = ((bch_val1 >> 4) & 0xFF); - *ecc_code++ = ((bch_val1 & 0xF) << 4); - break; - case OMAP_ECC_BCH16_CODE_HW: - val = readl(gpmc_regs->gpmc_bch_result6[i]); - ecc_code[0] = ((val >> 8) & 0xFF); - ecc_code[1] = ((val >> 0) & 0xFF); - val = readl(gpmc_regs->gpmc_bch_result5[i]); - ecc_code[2] = ((val >> 24) & 0xFF); - ecc_code[3] = ((val >> 16) & 0xFF); - ecc_code[4] = ((val >> 8) & 0xFF); - ecc_code[5] = ((val >> 0) & 0xFF); - val = readl(gpmc_regs->gpmc_bch_result4[i]); - ecc_code[6] = ((val >> 24) & 0xFF); - ecc_code[7] = ((val >> 16) & 0xFF); - ecc_code[8] = ((val >> 8) & 0xFF); - ecc_code[9] = ((val >> 0) & 0xFF); - val = readl(gpmc_regs->gpmc_bch_result3[i]); - ecc_code[10] = ((val >> 24) & 0xFF); - ecc_code[11] = ((val >> 16) & 0xFF); - ecc_code[12] = ((val >> 8) & 0xFF); - ecc_code[13] = ((val >> 0) & 0xFF); - val = readl(gpmc_regs->gpmc_bch_result2[i]); - ecc_code[14] = ((val >> 24) & 0xFF); - ecc_code[15] = ((val >> 16) & 0xFF); - ecc_code[16] = ((val >> 8) & 0xFF); - ecc_code[17] = ((val >> 0) & 0xFF); - val = readl(gpmc_regs->gpmc_bch_result1[i]); - ecc_code[18] = ((val >> 24) & 0xFF); - ecc_code[19] = ((val >> 16) & 0xFF); - ecc_code[20] = ((val >> 8) & 0xFF); - ecc_code[21] = ((val >> 0) & 0xFF); - val = readl(gpmc_regs->gpmc_bch_result0[i]); - ecc_code[22] = ((val >> 24) & 0xFF); - ecc_code[23] = ((val >> 16) & 0xFF); - ecc_code[24] = ((val >> 8) & 0xFF); - ecc_code[25] = ((val >> 0) & 0xFF); - break; - default: - return -EINVAL; - } - - /* ECC scheme specific syndrome customizations */ - switch (info->ecc_opt) { - case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW: - /* Add constant polynomial to remainder, so that - * ECC of blank pages results in 0x0 on reading back */ - for (j = 0; j < eccbytes; j++) - ecc_calc[j] ^= bch4_polynomial[j]; - break; - case OMAP_ECC_BCH4_CODE_HW: - /* Set 8th ECC byte as 0x0 for ROM compatibility */ - ecc_calc[eccbytes - 1] = 0x0; - break; - case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW: - /* Add constant polynomial to remainder, so that - * ECC of blank pages results in 0x0 on reading back */ - for (j = 0; j < eccbytes; j++) - ecc_calc[j] ^= bch8_polynomial[j]; - break; - case OMAP_ECC_BCH8_CODE_HW: - /* Set 14th ECC byte as 0x0 for ROM compatibility */ - ecc_calc[eccbytes - 1] = 0x0; - break; - case OMAP_ECC_BCH16_CODE_HW: - break; - default: - return -EINVAL; - } + ret = _omap_calculate_ecc_bch(mtd, dat, ecc_calc, i); + if (ret) + return ret; - ecc_calc += eccbytes; + ecc_calc += eccbytes; } return 0; @@ -1496,7 +1539,7 @@ static int omap_write_page_bch(struct mt chip->write_buf(mtd, buf, mtd->writesize); /* Update ecc vector from GPMC result registers */ - chip->ecc.calculate(mtd, buf, &ecc_calc[0]); + omap_calculate_ecc_bch_multi(mtd, buf, &ecc_calc[0]); ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0, chip->ecc.total); @@ -1509,6 +1552,72 @@ static int omap_write_page_bch(struct mt } /** + * omap_write_subpage_bch - BCH hardware ECC based subpage write + * @mtd: mtd info structure + * @chip: nand chip info structure + * @offset: column address of subpage within the page + * @data_len: data length + * @buf: data buffer + * @oob_required: must write chip->oob_poi to OOB + * @page: page number to write + * + * OMAP optimized subpage write method. + */ +static int omap_write_subpage_bch(struct mtd_info *mtd, + struct nand_chip *chip, u32 offset, + u32 data_len, const u8 *buf, + int oob_required, int page) +{ + u8 *ecc_calc = chip->buffers->ecccalc; + int ecc_size = chip->ecc.size; + int ecc_bytes = chip->ecc.bytes; + int ecc_steps = chip->ecc.steps; + u32 start_step = offset / ecc_size; + u32 end_step = (offset + data_len - 1) / ecc_size; + int step, ret = 0; + + /* + * Write entire page at one go as it would be optimal + * as ECC is calculated by hardware. + * ECC is calculated for all subpages but we choose + * only what we want. + */ + + /* Enable GPMC ECC engine */ + chip->ecc.hwctl(mtd, NAND_ECC_WRITE); + + /* Write data */ + chip->write_buf(mtd, buf, mtd->writesize); + + for (step = 0; step < ecc_steps; step++) { + /* mask ECC of un-touched subpages by padding 0xFF */ + if (step < start_step || step > end_step) + memset(ecc_calc, 0xff, ecc_bytes); + else + ret = _omap_calculate_ecc_bch(mtd, buf, ecc_calc, step); + + if (ret) + return ret; + + buf += ecc_size; + ecc_calc += ecc_bytes; + } + + /* copy calculated ECC for whole page to chip->buffer->oob */ + /* this include masked-value(0xFF) for unwritten subpages */ + ecc_calc = chip->buffers->ecccalc; + ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0, + chip->ecc.total); + if (ret) + return ret; + + /* write OOB buffer to NAND device */ + chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); + + return 0; +} + +/** * omap_read_page_bch - BCH ecc based page read function for entire page * @mtd: mtd info structure * @chip: nand chip info structure @@ -1544,7 +1653,7 @@ static int omap_read_page_bch(struct mtd chip->ecc.total); /* Calculate ecc bytes */ - chip->ecc.calculate(mtd, buf, ecc_calc); + omap_calculate_ecc_bch_multi(mtd, buf, ecc_calc); ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0, chip->ecc.total); @@ -2044,7 +2153,7 @@ static int omap_nand_probe(struct platfo nand_chip->ecc.strength = 4; nand_chip->ecc.hwctl = omap_enable_hwecc_bch; nand_chip->ecc.correct = nand_bch_correct_data; - nand_chip->ecc.calculate = omap_calculate_ecc_bch; + nand_chip->ecc.calculate = omap_calculate_ecc_bch_sw; mtd_set_ooblayout(mtd, &omap_sw_ooblayout_ops); /* Reserve one byte for the OMAP marker */ oobbytes_per_step = nand_chip->ecc.bytes + 1; @@ -2066,9 +2175,9 @@ static int omap_nand_probe(struct platfo nand_chip->ecc.strength = 4; nand_chip->ecc.hwctl = omap_enable_hwecc_bch; nand_chip->ecc.correct = omap_elm_correct_data; - nand_chip->ecc.calculate = omap_calculate_ecc_bch; nand_chip->ecc.read_page = omap_read_page_bch; nand_chip->ecc.write_page = omap_write_page_bch; + nand_chip->ecc.write_subpage = omap_write_subpage_bch; mtd_set_ooblayout(mtd, &omap_ooblayout_ops); oobbytes_per_step = nand_chip->ecc.bytes; @@ -2087,7 +2196,7 @@ static int omap_nand_probe(struct platfo nand_chip->ecc.strength = 8; nand_chip->ecc.hwctl = omap_enable_hwecc_bch; nand_chip->ecc.correct = nand_bch_correct_data; - nand_chip->ecc.calculate = omap_calculate_ecc_bch; + nand_chip->ecc.calculate = omap_calculate_ecc_bch_sw; mtd_set_ooblayout(mtd, &omap_sw_ooblayout_ops); /* Reserve one byte for the OMAP marker */ oobbytes_per_step = nand_chip->ecc.bytes + 1; @@ -2109,9 +2218,9 @@ static int omap_nand_probe(struct platfo nand_chip->ecc.strength = 8; nand_chip->ecc.hwctl = omap_enable_hwecc_bch; nand_chip->ecc.correct = omap_elm_correct_data; - nand_chip->ecc.calculate = omap_calculate_ecc_bch; nand_chip->ecc.read_page = omap_read_page_bch; nand_chip->ecc.write_page = omap_write_page_bch; + nand_chip->ecc.write_subpage = omap_write_subpage_bch; mtd_set_ooblayout(mtd, &omap_ooblayout_ops); oobbytes_per_step = nand_chip->ecc.bytes; @@ -2131,9 +2240,9 @@ static int omap_nand_probe(struct platfo nand_chip->ecc.strength = 16; nand_chip->ecc.hwctl = omap_enable_hwecc_bch; nand_chip->ecc.correct = omap_elm_correct_data; - nand_chip->ecc.calculate = omap_calculate_ecc_bch; nand_chip->ecc.read_page = omap_read_page_bch; nand_chip->ecc.write_page = omap_write_page_bch; + nand_chip->ecc.write_subpage = omap_write_subpage_bch; mtd_set_ooblayout(mtd, &omap_ooblayout_ops); oobbytes_per_step = nand_chip->ecc.bytes; Patches currently in stable-queue which might be from rogerq(a)ti.com are queue-4.9/mtd-nand-omap2-fix-subpage-write.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "mtd: nand: mtk: fix infinite ECC decode IRQ issue" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mtd: nand: mtk: fix infinite ECC decode IRQ issue to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mtd-nand-mtk-fix-infinite-ecc-decode-irq-issue.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 1d2fcdcf33339c7c8016243de0f7f31cf6845e8d Mon Sep 17 00:00:00 2001 From: Xiaolei Li <xiaolei.li(a)mediatek.com> Date: Mon, 30 Oct 2017 10:39:56 +0800 Subject: mtd: nand: mtk: fix infinite ECC decode IRQ issue From: Xiaolei Li <xiaolei.li(a)mediatek.com> commit 1d2fcdcf33339c7c8016243de0f7f31cf6845e8d upstream. For MT2701 NAND Controller, there may generate infinite ECC decode IRQ during long time burn test on some platforms. Once this issue occurred, the ECC decode IRQ status cannot be cleared in the IRQ handler function, and threads cannot be scheduled. ECC HW generates decode IRQ each sector, so there will have more than one decode IRQ if read one page of large page NAND. Currently, ECC IRQ handle flow is that we will check whether it is decode IRQ at first by reading the register ECC_DECIRQ_STA. This is a read-clear type register. If this IRQ is decode IRQ, then the ECC IRQ signal will be cleared at the same time. Secondly, we will check whether all sectors are decoded by reading the register ECC_DECDONE. This is because the current IRQ may be not dealed in time, and the next sectors have been decoded before reading the register ECC_DECIRQ_STA. Then, the next sectors's decode IRQs will not be generated. Thirdly, if all sectors are decoded by comparing with ecc->sectors, then we will complete ecc->done, set ecc->sectors as 0, and disable ECC IRQ by programming the register ECC_IRQ_REG(op) as 0. Otherwise, wait for the next ECC IRQ. But, there is a timing issue between step one and two. When we read the reigster ECC_DECIRQ_STA, all sectors are decoded except the last sector, and the ECC IRQ signal is cleared. But the last sector is decoded before reading ECC_DECDONE, so the ECC IRQ signal is enabled again by ECC HW, and it means we will receive one extra ECC IRQ later. In step three, we will find that all sectors were decoded, then disable ECC IRQ and return. When deal with the extra ECC IRQ, the ECC IRQ status cannot be cleared anymore. That is because the register ECC_DECIRQ_STA can only be cleared when the register ECC_IRQ_REG(op) is enabled. But actually we have disabled ECC IRQ in the previous ECC IRQ handle. So, there will keep receiving ECC decode IRQ. Now, we read the register ECC_DECIRQ_STA once again before completing the ecc done event. This ensures that there will be no extra ECC decode IRQ. Also, remove writel(0, ecc->regs + ECC_IRQ_REG(op)) from irq handler, because ECC IRQ is disabled in mtk_ecc_disable(). And clear ECC_DECIRQ_STA in mtk_ecc_disable() in case there is a timeout to wait decode IRQ. Fixes: 1d6b1e464950 ("mtd: mediatek: driver for MTK Smart Device") Signed-off-by: Xiaolei Li <xiaolei.li(a)mediatek.com> Signed-off-by: Boris Brezillon <boris.brezillon(a)free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/mtd/nand/mtk_ecc.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) --- a/drivers/mtd/nand/mtk_ecc.c +++ b/drivers/mtd/nand/mtk_ecc.c @@ -116,6 +116,11 @@ static irqreturn_t mtk_ecc_irq(int irq, op = ECC_DECODE; dec = readw(ecc->regs + ECC_DECDONE); if (dec & ecc->sectors) { + /* + * Clear decode IRQ status once again to ensure that + * there will be no extra IRQ. + */ + readw(ecc->regs + ECC_DECIRQ_STA); ecc->sectors = 0; complete(&ecc->done); } else { @@ -131,8 +136,6 @@ static irqreturn_t mtk_ecc_irq(int irq, } } - writel(0, ecc->regs + ECC_IRQ_REG(op)); - return IRQ_HANDLED; } @@ -342,6 +345,12 @@ void mtk_ecc_disable(struct mtk_ecc *ecc /* disable it */ mtk_ecc_wait_idle(ecc, op); + if (op == ECC_DECODE) + /* + * Clear decode IRQ status in case there is a timeout to wait + * decode IRQ. + */ + readw(ecc->regs + ECC_DECIRQ_STA); writew(0, ecc->regs + ECC_IRQ_REG(op)); writew(ECC_OP_DISABLE, ecc->regs + ECC_CTL_REG(op)); Patches currently in stable-queue which might be from xiaolei.li(a)mediatek.com are queue-4.9/mtd-nand-mtk-fix-infinite-ecc-decode-irq-issue.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "mtd: nand: Fix writing mtdoops to nand flash." has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled mtd: nand: Fix writing mtdoops to nand flash. to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mtd-nand-fix-writing-mtdoops-to-nand-flash.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 30863e38ebeb500a31cecee8096fb5002677dd9b Mon Sep 17 00:00:00 2001 From: Brent Taylor <motobud(a)gmail.com> Date: Mon, 30 Oct 2017 22:32:45 -0500 Subject: mtd: nand: Fix writing mtdoops to nand flash. From: Brent Taylor <motobud(a)gmail.com> commit 30863e38ebeb500a31cecee8096fb5002677dd9b upstream. When mtdoops calls mtd_panic_write(), it eventually calls panic_nand_write() in nand_base.c. In order to properly wait for the nand chip to be ready in panic_nand_wait(), the chip must first be selected. When using the atmel nand flash controller, a panic would occur due to a NULL pointer exception. Fixes: 2af7c6539931 ("mtd: Add panic_write for NAND flashes") Signed-off-by: Brent Taylor <motobud(a)gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon(a)free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- drivers/mtd/nand/nand_base.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2935,15 +2935,18 @@ static int panic_nand_write(struct mtd_i size_t *retlen, const uint8_t *buf) { struct nand_chip *chip = mtd_to_nand(mtd); + int chipnr = (int)(to >> chip->chip_shift); struct mtd_oob_ops ops; int ret; - /* Wait for the device to get ready */ - panic_nand_wait(mtd, chip, 400); - /* Grab the device */ panic_nand_get_device(chip, mtd, FL_WRITING); + chip->select_chip(mtd, chipnr); + + /* Wait for the device to get ready */ + panic_nand_wait(mtd, chip, 400); + memset(&ops, 0, sizeof(ops)); ops.len = len; ops.datbuf = (uint8_t *)buf; Patches currently in stable-queue which might be from motobud(a)gmail.com are queue-4.9/mtd-nand-fix-writing-mtdoops-to-nand-flash.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "MIPS: Fix odd fp register warnings with MIPS64r2" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled MIPS: Fix odd fp register warnings with MIPS64r2 to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mips-fix-odd-fp-register-warnings-with-mips64r2.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From c7fd89a6407ea3a44a2a2fa12d290162c42499c4 Mon Sep 17 00:00:00 2001 From: James Hogan <jhogan(a)kernel.org> Date: Fri, 10 Nov 2017 11:46:54 +0000 Subject: MIPS: Fix odd fp register warnings with MIPS64r2 From: James Hogan <jhogan(a)kernel.org> commit c7fd89a6407ea3a44a2a2fa12d290162c42499c4 upstream. Building 32-bit MIPS64r2 kernels produces warnings like the following on certain toolchains (such as GNU assembler 2.24.90, but not GNU assembler 2.28.51) since commit 22b8ba765a72 ("MIPS: Fix MIPS64 FP save/restore on 32-bit kernels"), due to the exposure of fpu_save_16odd from fpu_save_double and fpu_restore_16odd from fpu_restore_double: arch/mips/kernel/r4k_fpu.S:47: Warning: float register should be even, was 1 ... arch/mips/kernel/r4k_fpu.S:59: Warning: float register should be even, was 1 ... This appears to be because .set mips64r2 does not change the FPU ABI to 64-bit when -march=mips64r2 (or e.g. -march=xlp) is provided on the command line on that toolchain, from the default FPU ABI of 32-bit due to the -mabi=32. This makes access to the odd FPU registers invalid. Fix by explicitly changing the FPU ABI with .set fp=64 directives in fpu_save_16odd and fpu_restore_16odd, and moving the undefine of fp up in asmmacro.h so fp doesn't turn into $30. Fixes: 22b8ba765a72 ("MIPS: Fix MIPS64 FP save/restore on 32-bit kernels") Signed-off-by: James Hogan <jhogan(a)kernel.org> Cc: Ralf Baechle <ralf(a)linux-mips.org> Cc: Paul Burton <paul.burton(a)imgtec.com> Cc: linux-mips(a)linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17656/ Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/mips/include/asm/asmmacro.h | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) --- a/arch/mips/include/asm/asmmacro.h +++ b/arch/mips/include/asm/asmmacro.h @@ -19,6 +19,9 @@ #include <asm/asmmacro-64.h> #endif +/* preprocessor replaces the fp in ".set fp=64" with $30 otherwise */ +#undef fp + /* * Helper macros for generating raw instruction encodings. */ @@ -105,6 +108,7 @@ .macro fpu_save_16odd thread .set push .set mips64r2 + .set fp=64 SET_HARDFLOAT sdc1 $f1, THREAD_FPR1(\thread) sdc1 $f3, THREAD_FPR3(\thread) @@ -163,6 +167,7 @@ .macro fpu_restore_16odd thread .set push .set mips64r2 + .set fp=64 SET_HARDFLOAT ldc1 $f1, THREAD_FPR1(\thread) ldc1 $f3, THREAD_FPR3(\thread) @@ -234,9 +239,6 @@ .endm #ifdef TOOLCHAIN_SUPPORTS_MSA -/* preprocessor replaces the fp in ".set fp=64" with $30 otherwise */ -#undef fp - .macro _cfcmsa rd, cs .set push .set mips32r2 Patches currently in stable-queue which might be from jhogan(a)kernel.org are queue-4.9/mips-fix-an-n32-core-file-generation-regset-support-regression.patch queue-4.9/mips-bcm47xx-fix-led-inversion-for-wrt54gsv1.patch queue-4.9/mips-ralink-fix-mt7628-pinmux.patch queue-4.9/mips-fix-odd-fp-register-warnings-with-mips64r2.patch queue-4.9/mips-pci-remove-kern_warn-instance-inside-the-mt7620-driver.patch queue-4.9/mips-ralink-fix-typo-in-mt7628-pinmux-function.patch queue-4.9/mips-dts-remove-bogus-bcm96358nb4ser.dtb-from-dtb-y-entry.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "MIPS: pci: Remove KERN_WARN instance inside the mt7620 driver" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled MIPS: pci: Remove KERN_WARN instance inside the mt7620 driver to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mips-pci-remove-kern_warn-instance-inside-the-mt7620-driver.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 8593b18ad348733b5d5ddfa0c79dcabf51dff308 Mon Sep 17 00:00:00 2001 From: John Crispin <john(a)phrozen.org> Date: Mon, 20 Feb 2017 10:29:43 +0100 Subject: MIPS: pci: Remove KERN_WARN instance inside the mt7620 driver From: John Crispin <john(a)phrozen.org> commit 8593b18ad348733b5d5ddfa0c79dcabf51dff308 upstream. Switch the printk() call to the prefered pr_warn() api. Fixes: 7e5873d3755c ("MIPS: pci: Add MT7620a PCIE driver") Signed-off-by: John Crispin <john(a)phrozen.org> Cc: Ralf Baechle <ralf(a)linux-mips.org> Cc: linux-mips(a)linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15321/ Signed-off-by: James Hogan <jhogan(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/mips/pci/pci-mt7620.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) --- a/arch/mips/pci/pci-mt7620.c +++ b/arch/mips/pci/pci-mt7620.c @@ -121,7 +121,7 @@ static int wait_pciephy_busy(void) else break; if (retry++ > WAITRETRY_MAX) { - printk(KERN_WARN "PCIE-PHY retry failed.\n"); + pr_warn("PCIE-PHY retry failed.\n"); return -1; } } Patches currently in stable-queue which might be from john(a)phrozen.org are queue-4.9/mips-ralink-fix-mt7628-pinmux.patch queue-4.9/mips-pci-remove-kern_warn-instance-inside-the-mt7620-driver.patch queue-4.9/mips-ralink-fix-typo-in-mt7628-pinmux-function.patch

7 years, 1 month

1
0
0 0

[Linux-stable-mirror] Patch "MIPS: Fix an n32 core file generation regset support regression" has been added to the 4.9-stable tree

by gregkh＠linuxfoundation.org

This is a note to let you know that I've just added the patch titled MIPS: Fix an n32 core file generation regset support regression to the 4.9-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=sum… The filename of the patch is: mips-fix-an-n32-core-file-generation-regset-support-regression.patch and it can be found in the queue-4.9 subdirectory. If you, or anyone else, feels it should not be added to the stable tree, please let <stable(a)vger.kernel.org> know about it. >From 547da673173de51f73887377eb275304775064ad Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" <macro(a)mips.com> Date: Tue, 7 Nov 2017 19:09:20 +0000 Subject: MIPS: Fix an n32 core file generation regset support regression From: Maciej W. Rozycki <macro(a)mips.com> commit 547da673173de51f73887377eb275304775064ad upstream. Fix a commit 7aeb753b5353 ("MIPS: Implement task_user_regset_view.") regression, then activated by commit 6a9c001b7ec3 ("MIPS: Switch ELF core dumper to use regsets.)", that caused n32 processes to dump o32 core files by failing to set the EF_MIPS_ABI2 flag in the ELF core file header's `e_flags' member: $ file tls-core tls-core: ELF 32-bit MSB executable, MIPS, N32 MIPS64 rel2 version 1 (SYSV), [...] $ ./tls-core Aborted (core dumped) $ file core core: ELF 32-bit MSB core file MIPS, MIPS-I version 1 (SYSV), SVR4-style $ Previously the flag was set as the result of a: statement placed in arch/mips/kernel/binfmt_elfn32.c, however in the regset case, i.e. when CORE_DUMP_USE_REGSET is set, ELF_CORE_EFLAGS is no longer used by `fill_note_info' in fs/binfmt_elf.c, and instead the `->e_flags' member of the regset view chosen is. We have the views defined in arch/mips/kernel/ptrace.c, however only an o32 and an n64 one, and the latter is used for n32 as well. Consequently an o32 core file is incorrectly dumped from n32 processes (the ELF32 vs ELF64 class is chosen elsewhere, and the 32-bit one is correctly selected for n32). Correct the issue then by defining an n32 regset view and using it as appropriate. Issue discovered in GDB testing. Fixes: 7aeb753b5353 ("MIPS: Implement task_user_regset_view.") Signed-off-by: Maciej W. Rozycki <macro(a)mips.com> Cc: Ralf Baechle <ralf(a)linux-mips.org> Cc: Djordje Todorovic <djordje.todorovic(a)rt-rk.com> Cc: linux-mips(a)linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17617/ Signed-off-by: James Hogan <jhogan(a)kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh(a)linuxfoundation.org> --- arch/mips/kernel/ptrace.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) --- a/arch/mips/kernel/ptrace.c +++ b/arch/mips/kernel/ptrace.c @@ -647,6 +647,19 @@ static const struct user_regset_view use .n = ARRAY_SIZE(mips64_regsets), }; +#ifdef CONFIG_MIPS32_N32 + +static const struct user_regset_view user_mipsn32_view = { + .name = "mipsn32", + .e_flags = EF_MIPS_ABI2, + .e_machine = ELF_ARCH, + .ei_osabi = ELF_OSABI, + .regsets = mips64_regsets, + .n = ARRAY_SIZE(mips64_regsets), +}; + +#endif /* CONFIG_MIPS32_N32 */ + #endif /* CONFIG_64BIT */ const struct user_regset_view *task_user_regset_view(struct task_struct *task) @@ -658,6 +671,10 @@ const struct user_regset_view *task_user if (test_tsk_thread_flag(task, TIF_32BIT_REGS)) return &user_mips_view; #endif +#ifdef CONFIG_MIPS32_N32 + if (test_tsk_thread_flag(task, TIF_32BIT_ADDR)) + return &user_mipsn32_view; +#endif return &user_mips64_view; #endif } Patches currently in stable-queue which might be from macro(a)mips.com are queue-4.9/mips-fix-an-n32-core-file-generation-regset-support-regression.patch

7 years, 1 month

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-stable-mirror November 2017