Running this test on a small system produces different failures every test checking deletions, and some flushes. From different test runs:
TEST: Common host entries configuration tests (L2) [FAIL] Failed to delete L2 host entry
TEST: Common port group entries configuration tests (IPv4 (S, G)) [FAIL] IPv4 (S, G) entry with VLAN 10 not deleted when VLAN was not specified
TEST: Common port group entries configuration tests (IPv6 (*, G)) [FAIL] IPv6 (*, G) entry with VLAN 10 not deleted when VLAN was not specified
TEST: Flush tests [FAIL] Entry not flushed by specified VLAN ID
TEST: Flush tests [FAIL] IPv6 host entry not flushed by "nopermanent" state
Add a short sleep after deletion and flush to resolve this.
Tested using 25 test runs in a row, resulting in 100% pass OK.
Create a variable just for this test to allow short sleep, the default WAIT_TIME of 5 seconds makes the test far longer than necessary.
Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test") Signed-off-by: Jamie Bainbridge jamie.bainbridge@gmail.com --- .../selftests/net/forwarding/bridge_mdb.sh | 32 +++++++++++++++++++ 1 file changed, 32 insertions(+)
diff --git a/tools/testing/selftests/net/forwarding/bridge_mdb.sh b/tools/testing/selftests/net/forwarding/bridge_mdb.sh index d9d587454d207931a539f59be15cbc63d471888f..b3a2a7bc1824f4c394267b283b89e7a3ae19b0fb 100755 --- a/tools/testing/selftests/net/forwarding/bridge_mdb.sh +++ b/tools/testing/selftests/net/forwarding/bridge_mdb.sh @@ -30,6 +30,9 @@ ALL_TESTS=" ctrl_test "
+# time to wait for delete and flush to complete +: "${SETTLE_DELAY:=0.1}" + NUM_NETIFS=4 source lib.sh source tc_common.sh @@ -152,6 +155,7 @@ cfg_test_host_common() check_fail $? "Managed to replace $name host entry"
bridge mdb del dev br0 port br0 grp $grp $state vid 10 + sleep "$SETTLE_DELAY" bridge mdb get dev br0 grp $grp vid 10 &> /dev/null check_fail $? "Failed to delete $name host entry"
@@ -208,6 +212,7 @@ cfg_test_port_common() check_err $? "Failed to replace $name entry"
bridge mdb del dev br0 port $swp1 $grp_key permanent vid 10 + sleep "$SETTLE_DELAY" bridge mdb get dev br0 $grp_key vid 10 &> /dev/null check_fail $? "Failed to delete $name entry"
@@ -230,6 +235,7 @@ cfg_test_port_common() check_err $? "$name entry with VLAN 20 not added when VLAN was not specified"
bridge mdb del dev br0 port $swp1 $grp_key permanent + sleep "$SETTLE_DELAY" bridge mdb get dev br0 $grp_key vid 10 &> /dev/null check_fail $? "$name entry with VLAN 10 not deleted when VLAN was not specified" bridge mdb get dev br0 $grp_key vid 20 &> /dev/null @@ -310,6 +316,7 @@ __cfg_test_port_ip_star_g() bridge -d mdb get dev br0 grp $grp src $src1 vid 10 &> /dev/null check_err $? "(S, G) entry not created" bridge mdb del dev br0 port $swp1 grp $grp vid 10 + sleep "$SETTLE_DELAY" bridge -d mdb get dev br0 grp $grp vid 10 &> /dev/null check_fail $? "(*, G) entry not deleted" bridge -d mdb get dev br0 grp $grp src $src1 vid 10 &> /dev/null @@ -828,6 +835,7 @@ cfg_test_flush() bridge mdb add dev br0 port $swp1 grp 239.1.1.8 vid 10 temp
bridge mdb flush dev br0 + sleep "$SETTLE_DELAY" num_entries=$(bridge mdb show dev br0 | wc -l) [[ $num_entries -eq 0 ]] check_err $? 0 "Not all entries flushed after flush all" @@ -840,6 +848,7 @@ cfg_test_flush() bridge mdb add dev br0 port br0 grp 239.1.1.1 vid 10
bridge mdb flush dev br0 port $swp1 + sleep "$SETTLE_DELAY"
bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port $swp1" check_fail $? "Entry not flushed by specified port" @@ -849,11 +858,13 @@ cfg_test_flush() check_err $? "Host entry flushed by wrong port"
bridge mdb flush dev br0 port br0 + sleep "$SETTLE_DELAY"
bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port br0" check_fail $? "Host entry not flushed by specified port"
bridge mdb flush dev br0 + sleep "$SETTLE_DELAY"
# Check that when flushing by VLAN ID only entries programmed with the # specified VLAN ID are flushed and the rest are not. @@ -864,6 +875,7 @@ cfg_test_flush() bridge mdb add dev br0 port $swp2 grp 239.1.1.1 vid 20
bridge mdb flush dev br0 vid 10 + sleep "$SETTLE_DELAY"
bridge mdb get dev br0 grp 239.1.1.1 vid 10 &> /dev/null check_fail $? "Entry not flushed by specified VLAN ID" @@ -871,6 +883,7 @@ cfg_test_flush() check_err $? "Entry flushed by wrong VLAN ID"
bridge mdb flush dev br0 + sleep "$SETTLE_DELAY"
# Check that all permanent entries are flushed when "permanent" is # specified and that temporary entries are not. @@ -879,6 +892,7 @@ cfg_test_flush() bridge mdb add dev br0 port $swp2 grp 239.1.1.1 temp vid 10
bridge mdb flush dev br0 permanent + sleep "$SETTLE_DELAY"
bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port $swp1" check_fail $? "Entry not flushed by "permanent" state" @@ -886,6 +900,7 @@ cfg_test_flush() check_err $? "Entry flushed by wrong state ("permanent")"
bridge mdb flush dev br0 + sleep "$SETTLE_DELAY"
# Check that all temporary entries are flushed when "nopermanent" is # specified and that permanent entries are not. @@ -894,6 +909,7 @@ cfg_test_flush() bridge mdb add dev br0 port $swp2 grp 239.1.1.1 temp vid 10
bridge mdb flush dev br0 nopermanent + sleep "$SETTLE_DELAY"
bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port $swp1" check_err $? "Entry flushed by wrong state ("nopermanent")" @@ -901,6 +917,7 @@ cfg_test_flush() check_fail $? "Entry not flushed by "nopermanent" state"
bridge mdb flush dev br0 + sleep "$SETTLE_DELAY"
# Check that L2 host entries are not flushed when "nopermanent" is # specified, but flushed when "permanent" is specified. @@ -908,16 +925,19 @@ cfg_test_flush() bridge mdb add dev br0 port br0 grp 01:02:03:04:05:06 permanent vid 10
bridge mdb flush dev br0 nopermanent + sleep "$SETTLE_DELAY"
bridge mdb get dev br0 grp 01:02:03:04:05:06 vid 10 &> /dev/null check_err $? "L2 host entry flushed by wrong state ("nopermanent")"
bridge mdb flush dev br0 permanent + sleep "$SETTLE_DELAY"
bridge mdb get dev br0 grp 01:02:03:04:05:06 vid 10 &> /dev/null check_fail $? "L2 host entry not flushed by "permanent" state"
bridge mdb flush dev br0 + sleep "$SETTLE_DELAY"
# Check that IPv4 host entries are not flushed when "permanent" is # specified, but flushed when "nopermanent" is specified. @@ -925,16 +945,19 @@ cfg_test_flush() bridge mdb add dev br0 port br0 grp 239.1.1.1 temp vid 10
bridge mdb flush dev br0 permanent + sleep "$SETTLE_DELAY"
bridge mdb get dev br0 grp 239.1.1.1 vid 10 &> /dev/null check_err $? "IPv4 host entry flushed by wrong state ("permanent")"
bridge mdb flush dev br0 nopermanent + sleep "$SETTLE_DELAY"
bridge mdb get dev br0 grp 239.1.1.1 vid 10 &> /dev/null check_fail $? "IPv4 host entry not flushed by "nopermanent" state"
bridge mdb flush dev br0 + sleep "$SETTLE_DELAY"
# Check that IPv6 host entries are not flushed when "permanent" is # specified, but flushed when "nopermanent" is specified. @@ -942,16 +965,19 @@ cfg_test_flush() bridge mdb add dev br0 port br0 grp ff0e::1 temp vid 10
bridge mdb flush dev br0 permanent + sleep "$SETTLE_DELAY"
bridge mdb get dev br0 grp ff0e::1 vid 10 &> /dev/null check_err $? "IPv6 host entry flushed by wrong state ("permanent")"
bridge mdb flush dev br0 nopermanent + sleep "$SETTLE_DELAY"
bridge mdb get dev br0 grp ff0e::1 vid 10 &> /dev/null check_fail $? "IPv6 host entry not flushed by "nopermanent" state"
bridge mdb flush dev br0 + sleep "$SETTLE_DELAY"
# Check that when flushing by routing protocol only entries programmed # with the specified routing protocol are flushed and the rest are not. @@ -961,6 +987,7 @@ cfg_test_flush() bridge mdb add dev br0 port br0 grp 239.1.1.1 vid 10
bridge mdb flush dev br0 proto bgp + sleep "$SETTLE_DELAY"
bridge mdb get dev br0 grp 239.1.1.1 vid 10 | grep -q "port $swp1" check_fail $? "Entry not flushed by specified routing protocol" @@ -970,20 +997,25 @@ cfg_test_flush() check_err $? "Host entry flushed by wrong routing protocol"
bridge mdb flush dev br0 + sleep "$SETTLE_DELAY"
# Test that an error is returned when trying to flush using unsupported # parameters.
bridge mdb flush dev br0 src_vni 10 &> /dev/null + sleep "$SETTLE_DELAY" check_fail $? "Managed to flush by source VNI"
bridge mdb flush dev br0 dst 198.51.100.1 &> /dev/null + sleep "$SETTLE_DELAY" check_fail $? "Managed to flush by destination IP"
bridge mdb flush dev br0 dst_port 4789 &> /dev/null + sleep "$SETTLE_DELAY" check_fail $? "Managed to flush by UDP destination port"
bridge mdb flush dev br0 vni 10 &> /dev/null + sleep "$SETTLE_DELAY" check_fail $? "Managed to flush by destination VNI"
log_test "Flush tests"