Currently vlan modification action checks existence of vlan priority by comparing it to 0. Therefore it is impossible to modify existing vlan tag to have priority 0.
For example, the following tc command will change the vlan id but will not affect vlan priority:
tc filter add dev eth1 ingress matchall action vlan modify id 300 \ priority 0 pipe mirred egress redirect dev eth2
The incoming packet on eth1:
ethertype 802.1Q (0x8100), vlan 200, p 4, ethertype IPv4
will be changed to:
ethertype 802.1Q (0x8100), vlan 300, p 4, ethertype IPv4
although the user has intended to have p == 0.
The fix is to add tcfv_push_prio_exists flag to struct tcf_vlan_params and rely on it when deciding to set the priority.
The same flag is used to avoid dumping unset vlan priority.
Change Log: v2 -> v3: - Push assumes that the priority is being set - tcf_vlan_get_fill_size accounts for priority existence
v1 -> v2: - Do not dump unset priority and fix tests accordingly - Test for priority 0 modification
Boris Sukholitko (3): net/sched: act_vlan: Fix modify to allow 0 net/sched: act_vlan: No dump for unset priority net/sched: act_vlan: Test priority 0 modification
include/net/tc_act/tc_vlan.h | 1 + net/sched/act_vlan.c | 26 ++++++++++++----- .../tc-testing/tc-tests/actions/vlan.json | 28 +++++++++++++++++-- 3 files changed, 46 insertions(+), 9 deletions(-)