While debugging issues related to aarch64 only systems I ran into speedbumps due to the lack of detail in the results reported when the guest register read and reset value preservation tests were run, they generated an immediately fatal assert without indicating which register was being tested. Update these tests to report a result per register, making it much easier to see what the problem being reported is.
A similar, though less severe, issue exists with the validation of the individual bitfields in registers due to the use of immediately fatal asserts. Update those asserts to be standard kselftest reports.
Finally we have a fix for spurious errors on some NV systems.
Signed-off-by: Mark Brown broonie@kernel.org --- Changes in v4: - Correct check for 32 bit ID registers. - Link to v3: https://patch.msgid.link/20251219-kvm-arm64-set-id-regs-aarch64-v3-0-bfa474e...
Changes in v3: - Rebase onto v6.19-rc1. - Link to v2: https://patch.msgid.link/20251114-kvm-arm64-set-id-regs-aarch64-v2-0-672f214...
Changes in v2: - Add a fix for spurious failures with 64 bit only guests. - Link to v1: https://patch.msgid.link/20251030-kvm-arm64-set-id-regs-aarch64-v1-0-96fe0d2...
--- Mark Brown (5): KVM: selftests: arm64: Report set_id_reg reads of test registers as tests KVM: selftests: arm64: Report register reset tests individually KVM: selftests: arm64: Make set_id_regs bitfield validatity checks non-fatal KVM: selftests: arm64: Skip all 32 bit IDs when set_id_regs is aarch64 only KVM: selftests: arm64: Use is_aarch32_id_reg() in test_vm_ftr_id_regs()
tools/testing/selftests/kvm/arm64/set_id_regs.c | 159 ++++++++++++++++++------ 1 file changed, 119 insertions(+), 40 deletions(-) --- base-commit: 8f0b4cce4481fb22653697cced8d0d04027cb1e8 change-id: 20251028-kvm-arm64-set-id-regs-aarch64-ebb77969401c
Best regards, -- Mark Brown broonie@kernel.org