Extend cmsg_sender.c with a new option '-Q' to send SO_PRIORITY ancillary data.
cmsg_so_priority.sh script added to validate SO_PRIORITY behavior by creating VLAN device with egress QoS mapping and testing packet priorities using flower filters. Verify that packets with different priorities are correctly matched and counted by filters for multiple protocols and IP versions.
Reviewed-by: Willem de Bruijn willemb@google.com Acked-by: Willem de Bruijn willemb@google.com Reviewed-by: Ido Schimmel idosch@nvidia.com Tested-by: Ido Schimmel idosch@nvidia.com
Suggested-by: Ido Schimmel idosch@idosch.org Signed-off-by: Anna Emese Nyiri annaemesenyiri@gmail.com --- tools/testing/selftests/net/Makefile | 1 + tools/testing/selftests/net/cmsg_sender.c | 11 +- .../testing/selftests/net/cmsg_so_priority.sh | 151 ++++++++++++++++++ 3 files changed, 162 insertions(+), 1 deletion(-) create mode 100755 tools/testing/selftests/net/cmsg_so_priority.sh
diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index cb2fc601de66..f09bd96cc978 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -32,6 +32,7 @@ TEST_PROGS += ioam6.sh TEST_PROGS += gro.sh TEST_PROGS += gre_gso.sh TEST_PROGS += cmsg_so_mark.sh +TEST_PROGS += cmsg_so_priority.sh TEST_PROGS += cmsg_time.sh cmsg_ipv6.sh TEST_PROGS += netns-name.sh TEST_PROGS += nl_netdev.py diff --git a/tools/testing/selftests/net/cmsg_sender.c b/tools/testing/selftests/net/cmsg_sender.c index 876c2db02a63..bc314382e4e1 100644 --- a/tools/testing/selftests/net/cmsg_sender.c +++ b/tools/testing/selftests/net/cmsg_sender.c @@ -59,6 +59,7 @@ struct options { unsigned int proto; } sock; struct option_cmsg_u32 mark; + struct option_cmsg_u32 priority; struct { bool ena; unsigned int delay; @@ -97,6 +98,8 @@ static void __attribute__((noreturn)) cs_usage(const char *bin) "\n" "\t\t-m val Set SO_MARK with given value\n" "\t\t-M val Set SO_MARK via setsockopt\n" + "\t\t-P val Set SO_PRIORITY via setsockopt\n" + "\t\t-Q val Set SO_PRIORITY via cmsg\n" "\t\t-d val Set SO_TXTIME with given delay (usec)\n" "\t\t-t Enable time stamp reporting\n" "\t\t-f val Set don't fragment via cmsg\n" @@ -115,7 +118,7 @@ static void cs_parse_args(int argc, char *argv[]) { int o;
- while ((o = getopt(argc, argv, "46sS:p:P:m:M:n:d:tf:F:c:C:l:L:H:")) != -1) { + while ((o = getopt(argc, argv, "46sS:p:P:m:M:n:d:tf:F:c:C:l:L:H:Q:")) != -1) { switch (o) { case 's': opt.silent_send = true; @@ -148,6 +151,10 @@ static void cs_parse_args(int argc, char *argv[]) opt.mark.ena = true; opt.mark.val = atoi(optarg); break; + case 'Q': + opt.priority.ena = true; + opt.priority.val = atoi(optarg); + break; case 'M': opt.sockopt.mark = atoi(optarg); break; @@ -252,6 +259,8 @@ cs_write_cmsg(int fd, struct msghdr *msg, char *cbuf, size_t cbuf_sz)
ca_write_cmsg_u32(cbuf, cbuf_sz, &cmsg_len, SOL_SOCKET, SO_MARK, &opt.mark); + ca_write_cmsg_u32(cbuf, cbuf_sz, &cmsg_len, + SOL_SOCKET, SO_PRIORITY, &opt.priority); ca_write_cmsg_u32(cbuf, cbuf_sz, &cmsg_len, SOL_IPV6, IPV6_DONTFRAG, &opt.v6.dontfrag); ca_write_cmsg_u32(cbuf, cbuf_sz, &cmsg_len, diff --git a/tools/testing/selftests/net/cmsg_so_priority.sh b/tools/testing/selftests/net/cmsg_so_priority.sh new file mode 100755 index 000000000000..35dde2c5b67f --- /dev/null +++ b/tools/testing/selftests/net/cmsg_so_priority.sh @@ -0,0 +1,151 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +source lib.sh + +readonly KSFT_SKIP=4 + +IP4=192.0.2.1/24 +TGT4=192.0.2.2 +TGT4_RAW=192.0.2.3 +IP6=2001:db8::1/64 +TGT6=2001:db8::2 +TGT6_RAW=2001:db8::3 +PORT=1234 +TOTAL_TESTS=0 +FAILED_TESTS=0 + +if ! command -v jq &> /dev/null; then + echo "SKIP cmsg_so_priroity.sh test: jq is not installed." >&2 + exit "$KSFT_SKIP" +fi + +check_result() { + ((TOTAL_TESTS++)) + if [ "$1" -ne 0 ]; then + ((FAILED_TESTS++)) + fi +} + +cleanup() +{ + cleanup_ns $NS +} + +trap cleanup EXIT + +setup_ns NS + +create_filter() { + local handle=$1 + local vlan_prio=$2 + local ip_type=$3 + local proto=$4 + local dst_ip=$5 + local ip_proto + + if [[ "$proto" == "u" ]]; then + ip_proto="udp" + elif [[ "$ip_type" == "ipv4" && "$proto" == "i" ]]; then + ip_proto="icmp" + elif [[ "$ip_type" == "ipv6" && "$proto" == "i" ]]; then + ip_proto="icmpv6" + fi + + tc -n $NS filter add dev dummy1 \ + egress pref 1 handle "$handle" proto 802.1q \ + flower vlan_prio "$vlan_prio" vlan_ethtype "$ip_type" \ + dst_ip "$dst_ip" ${ip_proto:+ip_proto $ip_proto} \ + action pass +} + +ip -n $NS link set dev lo up +ip -n $NS link add name dummy1 up type dummy + +ip -n $NS link add link dummy1 name dummy1.10 up type vlan id 10 \ + egress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7 + +ip -n $NS address add $IP4 dev dummy1.10 +ip -n $NS address add $IP6 dev dummy1.10 nodad + +ip netns exec $NS sysctl -wq net.ipv4.ping_group_range='0 2147483647' + +ip -n $NS neigh add $TGT4 lladdr 00:11:22:33:44:55 nud permanent \ + dev dummy1.10 +ip -n $NS neigh add $TGT6 lladdr 00:11:22:33:44:55 nud permanent \ + dev dummy1.10 +ip -n $NS neigh add $TGT4_RAW lladdr 00:11:22:33:44:66 nud permanent \ + dev dummy1.10 +ip -n $NS neigh add $TGT6_RAW lladdr 00:11:22:33:44:66 nud permanent \ + dev dummy1.10 + +tc -n $NS qdisc add dev dummy1 clsact + +FILTER_COUNTER=10 + +for i in 4 6; do + for proto in u i r; do + echo "Test IPV$i, prot: $proto" + for priority in {0..7}; do + if [[ $i == 4 && $proto == "r" ]]; then + TGT=$TGT4_RAW + elif [[ $i == 6 && $proto == "r" ]]; then + TGT=$TGT6_RAW + elif [ $i == 4 ]; then + TGT=$TGT4 + else + TGT=$TGT6 + fi + + handle="${FILTER_COUNTER}${priority}" + + create_filter $handle $priority ipv$i $proto $TGT + + pkts=$(tc -n $NS -j -s filter show dev dummy1 egress \ + | jq ".[] | select(.options.handle == ${handle}) | \ + .options.actions[0].stats.packets") + + if [[ $pkts == 0 ]]; then + check_result 0 + else + echo "prio $priority: expected 0, got $pkts" + check_result 1 + fi + + ip netns exec $NS ./cmsg_sender -$i -Q $priority \ + -p $proto $TGT $PORT + + pkts=$(tc -n $NS -j -s filter show dev dummy1 egress \ + | jq ".[] | select(.options.handle == ${handle}) | \ + .options.actions[0].stats.packets") + if [[ $pkts == 1 ]]; then + check_result 0 + else + echo "prio $priority -Q: expected 1, got $pkts" + check_result 1 + fi + + ip netns exec $NS ./cmsg_sender -$i -P $priority \ + -p $proto $TGT $PORT + + pkts=$(tc -n $NS -j -s filter show dev dummy1 egress \ + | jq ".[] | select(.options.handle == ${handle}) | \ + .options.actions[0].stats.packets") + if [[ $pkts == 2 ]]; then + check_result 0 + else + echo "prio $priority -P: expected 2, got $pkts" + check_result 1 + fi + done + FILTER_COUNTER=$((FILTER_COUNTER + 10)) + done +done + +if [ $FAILED_TESTS -ne 0 ]; then + echo "FAIL - $FAILED_TESTS/$TOTAL_TESTS tests failed" + exit 1 +else + echo "OK - All $TOTAL_TESTS tests passed" + exit 0 +fi