On Tue, Jul 18, 2023 at 3:39 AM David Gow davidgow@google.com wrote:
On Sat, 8 Jul 2023 at 05:10, Rae Moar rmoar@google.com wrote:
Add documentation on the use of test attributes under the section "Tips for Running KUnit Tests" in the KUnit docs.
Documentation includes three sections on how to mark tests with attributes, how attributes are reported, and how the user can filter tests using test attributes.
Signed-off-by: Rae Moar rmoar@google.com
Looks good overall. Some nitpicks below.
Reviewed-by: David Gow davidgow@google.com
Changes since v1:
- This is a new patch
.../dev-tools/kunit/running_tips.rst | 163 ++++++++++++++++++ 1 file changed, 163 insertions(+)
diff --git a/Documentation/dev-tools/kunit/running_tips.rst b/Documentation/dev-tools/kunit/running_tips.rst index 8e8c493f17d1..c9bc5a6595d3 100644 --- a/Documentation/dev-tools/kunit/running_tips.rst +++ b/Documentation/dev-tools/kunit/running_tips.rst @@ -262,3 +262,166 @@ other code executed during boot, e.g. # Reset coverage counters before running the test. $ echo 0 > /sys/kernel/debug/gcov/reset $ modprobe kunit-example-test
+Test Attributes and Filtering +=============================
+Test suites and cases can be marked with test attributes, such as speed of +test. These attributes will later be printed in test output and can be used to +filter test execution.
+Marking Test Attributes +-----------------------
+Tests are marked with an attribute by including a ``kunit_attributes`` object +in the test definition.
+Test cases can be marked using the ``KUNIT_CASE_ATTR(test_name, attributes)`` +macro to define the test case instead of ``KUNIT_CASE(test_name)``.
+.. code-block:: c
static const struct kunit_attributes example_attr = {.speed = KUNIT_VERY_SLOW,};static struct kunit_case example_test_cases[] = {KUNIT_CASE_ATTR(example_test, example_attr),};+.. note::
To mark a test case as slow, you can also use ``KUNIT_CASE_SLOW(test_name)``.This is a helpful macro as the slow attribute is the most commonly used.+Test suites can be marked with an attribute by setting the "attr" field in the +suite definition.
+.. code-block:: c
static const struct kunit_attributes example_attr = {.speed = KUNIT_VERY_SLOW,};static struct kunit_suite example_test_suite = {...,.attr = example_attr,};+.. note::
Not all attributes need to be set in a ``kunit_attributes`` object. Unsetattributes will remain uninitialized and act as though the attribute is setto 0 or NULL. Thus, if an attribute is set to 0, it is treated as unset.These unset attributes will not be reported and may act as a default valuefor filtering purposes.+Reporting Attributes +--------------------
+When a user runs tests, attributes will be present in kernel output (in KTAP +format). This is an example of how test attributes for test cases will be formatted +in Kernel output:
+.. code-block:: none
# example_test.speed: slowok 1 example_test+This is an example of how test attributes for test suites will be formatted in +Kernel output:
+.. code-block:: none
KTAP version 2# Subtest: example_suite# module: kunit_example_test1..3...ok 1 example_suiteMaybe worth noting that kunit.py will hide these for passing tests by default, and --raw_output is needed to see them?
I will definitely add this in. If attributes are popular in the future, I could create a future patch to show attributes in the parser output as well.
+Additionally, users can output a full attribute report of tests with their +attributes, using the command line flag ``--list_tests_attr``:
+.. code-block:: bash
kunit.py run "example" --list_tests_attr+.. note::
This report can be accessed when running KUnit manually by passing in themodule_param ``kunit.action=list_attr``.+Filtering +---------
+Users can filter tests using the ``--filter`` command line flag when running +tests. As an example:
+.. code-block:: bash
kunit.py run --filter speed=slow+You can also use the following operations on filters: "<", ">", "<=", ">=", +"!=", and "=". Example:
+.. code-block:: bash
kunit.py run --filter "speed>slow"+This example will run all tests with speeds faster than slow. Note that the +characters < and > are often interpreted by the shell, so they may need to be +quoted or escaped, as above.
+Additionally, you can use multiple filters at once. Simply separate filters +using commas. Example:
+.. code-block:: bash
kunit.py run --filter "speed>slow, module=kunit_example_test"+.. note::
You can use this filtering feature when running KUnit manually by passingthe filter as a module param: ``kunit.filter="speed>slow, speed<=normal"``.+Filtered tests will not run or show up in the test output. You can use the +``--filter_skip`` flag to skip filtered tests instead. These tests will be +shown in the test output in the test but will not run. To use this feature when +running KUnit manually, use the ``kunit.filter`` module param with +``kunit.filter_action=skip``.
+Rules of Filtering Procedure +----------------------------
+Since both suites and test cases can have attributes, there may be conflicts +between attributes during filtering. The process of filtering follows these +rules:
+- Filtering always operates at a per-test level.
+- If a test has an attribute set, then the test's value is filtered on.
+- Otherwise, the value falls back to the suite's value.
+- If neither are set, the attribute has a global "default" value, which is used.
+List of Current Attributes +--------------------------
I wonder whether this should end up part of the KTAP spec (or as an appendix/supplement to it). Or even as a separate page within the KUnit documentation to avoid running_tips.rst from getting too huge.
I am a bit hesitant to move this as part of the KTAP spec in case there will exist KTAP attributes/data that are not supported by the KUnit test attributes framework (could be runtime specific attributes that use a different framework?).
However, I do worry about the size of this page. Do you think that I should move all of the attributes to a new documentation page?
+``speed``
+This attribute indicates the speed of a test's execution (how slow or fast the +test is).
+This attribute is saved as an enum with the following categories: "normal", +"slow", or "very_slow". The assumed default speed for tests is "normal". This +indicates that the test takes a relatively trivial amount of time (less than +1 second), regardless of the machine it is running on. Any test slower than +this could be marked as "slow" or "very_slow".
Is it worth noting that "KUNIT_CASE_SLOW()" can be used to easily set this to slow?
This definitely seems important to add. I will add this to the documentation.
+``module``
+This attribute indicates the name of the module associated with the test.
+This attribute is automatically saved as a string and is printed for each suite. +Tests can also be filtered using this attribute.
-- 2.41.0.255.g8b1d071c50-goog
Error: new blank line at EOF.
Oops. I will change this.