After this change the single SAN device (ns3eth1) is now replaced with two SAN devices - respectively ns4eth1 and ns5eth1.
It is possible to extend this script to have more SAN devices connected by adding them to ns3br1 bridge.
Signed-off-by: Lukasz Majewski lukma@denx.de --- tools/testing/selftests/net/hsr/hsr_redbox.sh | 71 +++++++++++++------ 1 file changed, 49 insertions(+), 22 deletions(-)
diff --git a/tools/testing/selftests/net/hsr/hsr_redbox.sh b/tools/testing/selftests/net/hsr/hsr_redbox.sh index db69be95ecb3..1f36785347c0 100755 --- a/tools/testing/selftests/net/hsr/hsr_redbox.sh +++ b/tools/testing/selftests/net/hsr/hsr_redbox.sh @@ -8,12 +8,19 @@ source ./hsr_common.sh do_complete_ping_test() { echo "INFO: Initial validation ping (HSR-SAN/RedBox)." - # Each node has to be able each one. + # Each node has to be able to reach each one. do_ping "${ns1}" 100.64.0.2 do_ping "${ns2}" 100.64.0.1 - # Ping from SAN to hsr1 (via hsr2) + # Ping between SANs (test bridge) + do_ping "${ns4}" 100.64.0.51 + do_ping "${ns5}" 100.64.0.41 + # Ping from SANs to hsr1 (via hsr2) (and opposite) do_ping "${ns3}" 100.64.0.1 do_ping "${ns1}" 100.64.0.3 + do_ping "${ns1}" 100.64.0.41 + do_ping "${ns4}" 100.64.0.1 + do_ping "${ns1}" 100.64.0.51 + do_ping "${ns5}" 100.64.0.1 stop_if_error "Initial validation failed."
# Wait for MGNT HSR frames being received and nodes being @@ -23,8 +30,12 @@ do_complete_ping_test() echo "INFO: Longer ping test (HSR-SAN/RedBox)." # Ping from SAN to hsr1 (via hsr2) do_ping_long "${ns3}" 100.64.0.1 - # Ping from hsr1 (via hsr2) to SAN + # Ping from hsr1 (via hsr2) to SANs (and opposite) do_ping_long "${ns1}" 100.64.0.3 + do_ping_long "${ns1}" 100.64.0.41 + do_ping_long "${ns4}" 100.64.0.1 + do_ping_long "${ns1}" 100.64.0.51 + do_ping_long "${ns5}" 100.64.0.1 stop_if_error "Longer ping test failed."
echo "INFO: All good." @@ -35,22 +46,26 @@ setup_hsr_interfaces() local HSRv="$1"
echo "INFO: preparing interfaces for HSRv${HSRv} (HSR-SAN/RedBox)." - -# |NS1 | -# | | -# | /-- hsr1 --\ | -# | ns1eth1 ns1eth2 | -# |------------------------| -# | | -# | | -# | | -# |------------------------| |-----------| -# | ns2eth1 ns2eth2 | | | -# | -- hsr2 --/ | | | -# | \ | | | -# | ns2eth3 |--------| ns3eth1 | -# | (interlink)| | | -# |NS2 (RedBOX) | |NS3 (SAN) | +# +# IPv4 addresses (100.64.X.Y/24), and [X.Y] is presented on below diagram: +# +# +# |NS1 | |NS4 | +# | [0.1] | | | +# | /-- hsr1 --\ | | [0.41] | +# | ns1eth1 ns1eth2 | | ns4eth1 (SAN) | +# |------------------------| |-------------------| +# | | | +# | | | +# | | | +# |------------------------| |-------------------------------| +# | ns2eth1 ns2eth2 | | ns3eth2 | +# | -- hsr2 --/ | | / | +# | [0.2] \ | | / | |------------| +# | ns2eth3 |---| ns3eth1 -- ns3br1 -- ns3eth3--|--| ns5eth1 | +# | (interlink)| | [0.3] [0.11] | | [0.51] | +# |NS2 (RedBOX) | |NS3 (BR) | | NS5 (SAN) | +# # # Check if iproute2 supports adding interlink port to hsrX device ip link help hsr | grep -q INTERLINK @@ -59,7 +74,9 @@ setup_hsr_interfaces() # Create interfaces for name spaces ip link add ns1eth1 netns "${ns1}" type veth peer name ns2eth1 netns "${ns2}" ip link add ns1eth2 netns "${ns1}" type veth peer name ns2eth2 netns "${ns2}" - ip link add ns3eth1 netns "${ns3}" type veth peer name ns2eth3 netns "${ns2}" + ip link add ns2eth3 netns "${ns2}" type veth peer name ns3eth1 netns "${ns3}" + ip link add ns3eth2 netns "${ns3}" type veth peer name ns4eth1 netns "${ns4}" + ip link add ns3eth3 netns "${ns3}" type veth peer name ns5eth1 netns "${ns5}"
sleep 1
@@ -70,21 +87,31 @@ setup_hsr_interfaces() ip -n "${ns2}" link set ns2eth2 up ip -n "${ns2}" link set ns2eth3 up
- ip -n "${ns3}" link set ns3eth1 up + ip -n "${ns3}" link add name ns3br1 type bridge + ip -n "${ns3}" link set ns3br1 up + ip -n "${ns3}" link set ns3eth1 master ns3br1 up + ip -n "${ns3}" link set ns3eth2 master ns3br1 up + ip -n "${ns3}" link set ns3eth3 master ns3br1 up + + ip -n "${ns4}" link set ns4eth1 up + ip -n "${ns5}" link set ns5eth1 up
ip -net "${ns1}" link add name hsr1 type hsr slave1 ns1eth1 slave2 ns1eth2 supervision 45 version ${HSRv} proto 0 ip -net "${ns2}" link add name hsr2 type hsr slave1 ns2eth1 slave2 ns2eth2 interlink ns2eth3 supervision 45 version ${HSRv} proto 0
ip -n "${ns1}" addr add 100.64.0.1/24 dev hsr1 ip -n "${ns2}" addr add 100.64.0.2/24 dev hsr2 + ip -n "${ns3}" addr add 100.64.0.11/24 dev ns3br1 ip -n "${ns3}" addr add 100.64.0.3/24 dev ns3eth1 + ip -n "${ns4}" addr add 100.64.0.41/24 dev ns4eth1 + ip -n "${ns5}" addr add 100.64.0.51/24 dev ns5eth1
ip -n "${ns1}" link set hsr1 up ip -n "${ns2}" link set hsr2 up }
check_prerequisites -setup_ns ns1 ns2 ns3 +setup_ns ns1 ns2 ns3 ns4 ns5
trap cleanup_all_ns EXIT