This pen is compatible with multiple Wacom tablets, but we only add support for the Intuos Pro 2 M, as this is the one our user reported the bug against.
We can not generically add all compatible Wacom tablets as we are writing the offsets by hand.
The point of this HID-BPF program is to work around a firmware limitation where the pressure is repeated every other report. Given that we know this will happen, we can change the first new pressure information with the mean compared to the previous one. This way we smooth the incoming pressure without losing information.
Cc: Ping Cheng pinglinux@gmail.com Cc: Jason Gerecke killertofu@gmail.com Cc: Aaron Armstrong Skomra skomra@gmail.com Cc: Joshua Dickens Joshua@joshua-dickens.com Signed-off-by: Benjamin Tissoires bentiss@kernel.org --- drivers/hid/bpf/progs/Wacom__ArtPen.bpf.c | 173 ++++++++++++++++++++++++++++++ 1 file changed, 173 insertions(+)
diff --git a/drivers/hid/bpf/progs/Wacom__ArtPen.bpf.c b/drivers/hid/bpf/progs/Wacom__ArtPen.bpf.c new file mode 100644 index 000000000000..dc05aa48faa7 --- /dev/null +++ b/drivers/hid/bpf/progs/Wacom__ArtPen.bpf.c @@ -0,0 +1,173 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright (c) 2024 Benjamin Tissoires + */ + +#include "vmlinux.h" +#include "hid_bpf.h" +#include "hid_bpf_helpers.h" +#include <bpf/bpf_tracing.h> + +#define VID_WACOM 0x056a +#define ART_PEN_ID 0x0804 +#define PID_INTUOS_PRO_2_M 0x0357 + +HID_BPF_CONFIG( + HID_DEVICE(BUS_USB, HID_GROUP_GENERIC, VID_WACOM, PID_INTUOS_PRO_2_M) +); + +/* + * This filter is here for the Art Pen stylus only: + * - when used on some Wacom devices (see the list of attached PIDs), this pen + * reports pressure every other events. + * - to solve that, given that we know that the next event will be the same as + * the current one, we can emulate a smoother pressure reporting by reporting + * the mean of the previous value and the current one. + * + * We are effectively delaying the pressure by one event every other event, but + * that's less of an annoyance compared to the chunkiness of the reported data. + * + * For example, let's assume the following set of events: + * <Tip switch 0> <X 0> <Y 0> <Pressure 0 > <Tooltype 0x0804> + * <Tip switch 1> <X 1> <Y 1> <Pressure 100 > <Tooltype 0x0804> + * <Tip switch 1> <X 2> <Y 2> <Pressure 100 > <Tooltype 0x0804> + * <Tip switch 1> <X 3> <Y 3> <Pressure 200 > <Tooltype 0x0804> + * <Tip switch 1> <X 4> <Y 4> <Pressure 200 > <Tooltype 0x0804> + * <Tip switch 0> <X 5> <Y 5> <Pressure 0 > <Tooltype 0x0804> + * + * The filter will report: + * <Tip switch 0> <X 0> <Y 0> <Pressure 0 > <Tooltype 0x0804> + * <Tip switch 1> <X 1> <Y 1> <Pressure * 50*> <Tooltype 0x0804> + * <Tip switch 1> <X 2> <Y 2> <Pressure 100 > <Tooltype 0x0804> + * <Tip switch 1> <X 3> <Y 3> <Pressure *150*> <Tooltype 0x0804> + * <Tip switch 1> <X 4> <Y 4> <Pressure 200 > <Tooltype 0x0804> + * <Tip switch 0> <X 5> <Y 5> <Pressure 0 > <Tooltype 0x0804> + * + */ + +struct wacom_params { + __u16 pid; + __u16 rdesc_len; + __u8 report_id; + __u8 report_len; + struct { + __u8 tip_switch; + __u8 pressure; + __u8 tool_type; + } offsets; +}; + +/* + * Multiple device can support the same stylus, so + * we need to know which device has which offsets + */ +static const struct wacom_params devices[] = { + { + .pid = PID_INTUOS_PRO_2_M, + .rdesc_len = 949, + .report_id = 16, + .report_len = 27, + .offsets = { + .tip_switch = 1, + .pressure = 8, + .tool_type = 25, + }, + }, +}; + +static struct wacom_params params = { 0 }; + +/* HID-BPF reports a 64 bytes chunk anyway, so this ensures + * the verifier to know we are addressing the memory correctly + */ +#define PEN_REPORT_LEN 64 + +/* only odd frames are modified */ +static bool odd; + +static __u16 prev_pressure; + +static inline void *get_bits(__u8 *data, unsigned int byte_offset) +{ + return data + byte_offset; +} + +static inline __u16 *get_u16(__u8 *data, unsigned int offset) +{ + return (__u16 *)get_bits(data, offset); +} + +static inline __u8 *get_u8(__u8 *data, unsigned int offset) +{ + return (__u8 *)get_bits(data, offset); +} + +SEC("fmod_ret/hid_bpf_device_event") +int BPF_PROG(artpen_pressure_interpolate, struct hid_bpf_ctx *hctx) +{ + __u8 *data = hid_bpf_get_data(hctx, 0 /* offset */, PEN_REPORT_LEN /* size */); + __u16 *pressure, *tool_type; + __u8 *tip_switch; + + if (!data) + return 0; /* EPERM check */ + + if (data[0] != params.report_id || + params.offsets.tip_switch >= PEN_REPORT_LEN || + params.offsets.pressure >= PEN_REPORT_LEN - 1 || + params.offsets.tool_type >= PEN_REPORT_LEN - 1) + return 0; /* invalid report or parameters */ + + tool_type = get_u16(data, params.offsets.tool_type); + if (*tool_type != ART_PEN_ID) + return 0; + + tip_switch = get_u8(data, params.offsets.tip_switch); + if ((*tip_switch & 0x01) == 0) { + prev_pressure = 0; + odd = true; + return 0; + } + + pressure = get_u16(data, params.offsets.pressure); + + if (odd) + *pressure = (*pressure + prev_pressure) / 2; + + prev_pressure = *pressure; + odd = !odd; + + return 0; +} + +SEC("syscall") +int probe(struct hid_bpf_probe_args *ctx) +{ + struct hid_bpf_ctx *hid_ctx; + __u16 pid; + int i; + + /* get a struct hid_device to access the actual pid of the device */ + hid_ctx = hid_bpf_allocate_context(ctx->hid); + if (!hid_ctx) { + ctx->retval = -ENODEV; + return -1; /* EPERM check */ + } + pid = hid_ctx->hid->product; + + ctx->retval = -EINVAL; + + /* Match the given device with the list of known devices */ + for (i = 0; i < ARRAY_SIZE(devices); i++) { + const struct wacom_params *device = &devices[i]; + + if (device->pid == pid && device->rdesc_len == ctx->rdesc_size) { + params = *device; + ctx->retval = 0; + } + } + + hid_bpf_release_context(hid_ctx); + return 0; +} + +char _license[] SEC("license") = "GPL";