On Sat, Jul 29, 2023 at 08:05:00PM +0800, Zhangjin Wu wrote: (...)
The new added lines are just want to keep the console active to tell users the test is running at background, even there is potential hang, users will learn what the progress it is, but if we allow print the running log to screen (may still have the issues mentioned by Willy in another email thread), these lines can be simply removed to get a cleaner version.
The old version didn't add such logic, beside timeout logic, it simply try to match the expected 'reboot: ' string, but we do need to match the 'Kernel panic' string too to catch a crash nolibc-test case, so, a simplified version looks like this:
TIMEOUT_CMD = t=$(QEMU_TIMEOUT); finish=0; \ echo "Running $(IMAGE_NAME) on qemu-system-$(QEMU_ARCH)"; \while [ $$t -gt 0 ]; do \ sleep 1; t=$$(expr $$t - 1); \ grep -E "reboot: System halted|reboot: Power down|Kernel panic" "$(RUN_OUT)"; then finish=1; sleep 1; break; fi; \ done; \ if [ $$finish -eq 1 ]; then echo "test finish"; else echo "test timeout"; fi; \ pkill -15 qemu-system-$(QEMU_ARCH) || true
Now, the lines are not too many, and the left expected strings should be stable enough, do you like this one?
Do you realize how unreadable and undebuggable this is for the casual reader who just tries to figure what command line to pass to qemu to run the test manually ? You seem to focus a lot on "if the test hangs" but nobody ever reported such a problem in the last few years. However we've been spending weeks discussing how to add support for extra features or architectures and such hacky stuff definitely steps in the way and complicates everything.
I do expect the timeout command has a "-m" option like this:
timeout --foreground 10 -m "reboot: |Kernel panic" qemu-system-$(QEMU_ARCH) ...
I suggest that we give up on this timeout thing completely. You've shown that it significantly complicates everything and we yet have to find a single valid use case. Other subsystems also use QEMU without this. rcutorture does perform some process management but it's way more advanced and complete, and there's a reason: the tests are usually not supposed to end by themselves.
Before we complicated nolibc-test to handle the no-procfs case to save a few seconds building the kernel and now we have fairly big timeouts.
In reality, the answer is NO to "now we have fairly big timeouts".
Firstly, If there is no hang or no poweroff failure, every run will quit normally.
Which is one good reason for not complexifying everything.
Secondly, even there is a poweroff failure or kernel panic, a 'reboot: ' line will be always printed as expected and quit normally.
This is not supposed to happen in automated tests, and archs that fail at this will simply be either excluded from automated tests, or will be run through whatever external timeout mechanism.
Thirdly, just only when there is a hang (not specific to tinyconfig), such as wrong bios version or missing firmware or even kernel hang with new changes (for example, the irqstack related riscv kernel hang I reported), blabla. such hangs will be detected by the fixed timeout value (like a watchdog).
These are local tools issues, we can't fix them all and it's not our job. We're just providing an easy and hopefully convenient framework to test syscalls. We're not supposed to require users to have to go through complex debugging in this. And if they face a failure due to their local tools (like I had with my old qemu version), they'll just work around it by rebuilding it and that will be done. In the worst case, some archs might require a Ctrl-C once in a while during a manual test. No big deal. Definitely not as big as spending 10 minutes trying to figure how to find one's way through a complicated makefile, or wondering what's that runaway qemu process in the background that refuses to die, etc.
When poweroff fails on a target qemu, it still prints the 'reboot: ' line as below, but will hang there after this line, our timeout logic will detect this line and tell qemu quit as a normal poweroff.
Total number of errors: 0 Leaving init with final status: 0 reboot: System halted /* This line which be printed when reboot() issues, not depends on qemu or kernel driver */ ---> detecting reboot: System halted|reboot: Power down|Kernel panic - not syncing: Attempted to kill init|Rebooting ... test finish /* Even qemu not poweroff successfully, we will kill it while the above line detected */ LOG: Boot run successfully. Running boot-finishThe oldest method I used locally is the 'timeout' command itself only, it is really a dead wait for a fixed timeout, the new method we used here to match the expected string does help a lot to simulate a always sucessful qemu poweroff support, no kernel and qemu dependent, lightweight enough.
I'm still definitely not fond of it because it turns something super simple into something complex and likely unreliable, for very little benefit.
Is the above explaination clearer? ;-)
At least given the numerous approaches we've seen, now I'm convinced I don't want to see that anymore. Too much complication, a feeling of hackish and unreliable solution that will very likely cause lots of fixes in the future.
Based on the kernel versions from v2.6.10 - v6.x which I have used on more than 7 architectures in my own Linux Lab project, the poweroff support of qemu + kernel is never deterministic, some versions ok, some versions fail, even with the defconfig, that's why an external timeout is always required.
Again, never ever experienced such a problem with the default configs for the supported archs, with one of my machines having a qemu version as old as 2.7. Paul always runs all the tests as well and never reported this problem either. Thus I would like that we stick to precise facts about problems that occur rather than just papering over them in a generic way.
"Since the low-level poweroff support is heavily kernel & qemu dependent"
The kernel we can control.
How common are qemus with that are missing poweroff support? As this worked before I guess the only architecture where this could pose a problem would be ppc.
Yes, as explained above, based on the experience I have on tons of kernel versions of different architecture, it is really hard to make poweroff work as expected all the time, as the kernel and qemu changes, it may fail at any version randomly.
Please could you provide us with a reproducer for this problem, with the mainline commit ID, arch, toolchain used, qemu version, because I think you're generalizing over a few cases that happened during your tinyconfig tests, for various possible reasons, but which are likely not good reasons for complicating everything.
Beside ppc, all of my local tinyconfig config files of every architecture are ready for boot and print and also of course for the 'reboot: ' line print. but it is 'hard' to find and enable the left options to just further enable 'poweroff' support.
If tinyconfig is not fixable, it's not usable, period. Right now all archs stop fine for many of us with defconfig. If only a few tinyconfig fail we'd rather invest time on these specific ones trying to figure what options you need to add to the extra_config.
Firstly, I have tried to enable some of them, but it deviates the tinyconfig goal, for example, x86 requires to enable both ACPI and PCI to just let poweroff work, so, I'm not planning to really enable them.
Secondly, the time cost to just find and enable the poweroff options for every architecture (and even for the new nolibc portings) is huge, I give up after several tries, and they may fail in some future versions randomly, I do think we may be not really interested in fixing up such bugs in kernel drivers side ;-)
OK so better just give up on tinyconfig if it's not suitable for the tests ? The more you present the shortcomings that come with them, the less appealing it looks now.
Thirdly, as Thomas mentioned before, the wireguard test use tinyconfig too, just found it also gives up the poweroff support in its config options and it use a simple raw timeout command, but the timeout is really 'huge', 20m v.s. 10 seconds ;-)
grep timeout tools/testing/selftests/wireguard/qemu/Makefiletimeout --foreground 20m qemu-system-$(QEMU_ARCH) \ timeout --foreground 20m $< \
As I previously mentioned, I'm not fundamentally against a simple timeout command *iff* we can validate the exact problem and the conditions where it happens and we decide that it's the best workaround. And I suspect that even once we find it we'll prefer to just not run that specific setup by default and that's all.
I think I have a much simpler idea: we don't care about PPC32. I mean OK it can be supported if it happens to work, we will just not include it in default runs, because it will require Ctrl-C to finish, and so what ? nolibc has been in the kernel for 5 years or so, nobody ever cared about PPC, why should we suddenly break or complicate everything just to support a sub-arch that nobody found interesting to add till now?
Yes, this timeout logic is ok to be removed from this patchset, till we get a better solution.
Thanks.
It would really help if your series could focus on *one thing* at a time. Currently I feel like in almost all patch series you've sent there are good stuff that could have been merged already, but which are mixed with hacks or unacceptable massive reworks that just result in the rest being kept on hold.
I would really appreciate it if you thought about clearly presenting the problems you're trying to solve before sending patch series, so that we can collectively decide whether these problems deserve being fixed or can be ignored, and if the cost of addressing them outweigh their cost. It would save many hours of review of patches whose goal is not always very clear. A good rule of thumb is that something that is only added and that provides a specific feature generally suffers not much discussion (beyond the usual style/naming etc). But patches that modify existing process, code organization or affect reliability should be discussed and argumented before even being created. It's easier to discuss a purpose than to try to review a patch for a context that is not very clear.
Thanks, Willy