Add IPv6 support to the netconsole basic functionality tests by:
- Introducing separate IPv4 and IPv6 address variables (SRCIP4/SRCIP6, DSTIP4/DSTIP6) to replace the single SRCIP/DSTIP variables - Adding select_ipv4_or_ipv6() function to choose protocol version - Updating socat configuration to use UDP6-LISTEN for IPv6 tests - Adding wait_for_port() wrapper to handle protocol-specific port waiting - Expanding test matrix to run both basic and extended formats against both IPv4 and IPv6 protocols - Improving cleanup to kill any remaining socat processes - Adding sleep delays for better IPv6 packet handling reliability
The test now validates netconsole functionality across both IP versions, improving test coverage for dual-stack network environments.
This test would avoid the regression fixed by commit f59902070269 ("net: netpoll: Initialize UDP checksum field before checksumming")
Signed-off-by: Breno Leitao leitao@debian.org --- .../selftests/drivers/net/lib/sh/lib_netcons.sh | 74 ++++++++++++++++++++-- .../testing/selftests/drivers/net/netcons_basic.sh | 52 ++++++++------- 2 files changed, 96 insertions(+), 30 deletions(-)
diff --git a/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh b/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh index 3fcf85a345969..60f968713cad7 100644 --- a/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh +++ b/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh @@ -11,9 +11,11 @@ set -euo pipefail LIBDIR=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")")
SRCIF="" # to be populated later -SRCIP=192.0.2.1 +SRCIP4="192.0.2.1" +SRCIP6="fc00::1" DSTIF="" # to be populated later -DSTIP=192.0.2.2 +DSTIP4="192.0.2.2" +DSTIP6="fc00::2"
PORT="6666" MSG="netconsole selftest" @@ -80,7 +82,23 @@ function configure_ip() { ip link set "${SRCIF}" up }
+function select_ipv4_or_ipv6() +{ + local VERSION=${1} + + if [[ "$VERSION" == "ipv6" ]] + then + DSTIP="${DSTIP6}" + SRCIP="${SRCIP6}" + else + DSTIP="${DSTIP4}" + SRCIP="${SRCIP4}" + fi +} + function set_network() { + local IP_VERSION=${1:-"ipv4"} + # setup_ns function is coming from lib.sh setup_ns NAMESPACE
@@ -91,6 +109,7 @@ function set_network() { # Link both interfaces back to back link_ifaces
+ select_ipv4_or_ipv6 "${IP_VERSION}" configure_ip }
@@ -119,6 +138,11 @@ function create_dynamic_target() { fi
echo 1 > "${NETCONS_PATH}"/enabled + + # This will make sure that the kernel was able to + # load the netconsole driver configuration. The console message + # gets more organized/sequential as well. + sleep 1 }
# Generate the command line argument for netconsole following: @@ -179,9 +203,18 @@ function set_user_data() {
function listen_port_and_save_to() { local OUTPUT=${1} + local IPVERSION=${2:-"ipv4"} + + if [ "${IPVERSION}" == "ipv4" ] + then + SOCAT_MODE="UDP-LISTEN" + else + SOCAT_MODE="UDP6-LISTEN" + fi + # Just wait for 2 seconds timeout 2 ip netns exec "${NAMESPACE}" \ - socat UDP-LISTEN:"${PORT}",fork "${OUTPUT}" + socat "${SOCAT_MODE}":"${PORT}",fork "${OUTPUT}" }
# Only validate that the message arrived properly @@ -263,8 +296,13 @@ function check_for_dependencies() { exit "${ksft_skip}" fi
- if ip addr list | grep -E "inet.*(${SRCIP}|${DSTIP})" 2> /dev/null; then - echo "SKIP: IPs already in use. Skipping it" >&2 + if ip addr list | grep -E "inet.*(${SRCIP4}|${DSTIP4})" 2> /dev/null; then + echo "SKIP: IPv4s already in use. Skipping it" >&2 + exit "${ksft_skip}" + fi + + if ip addr list | grep -E "inet.*(${SRCIP6}|${DSTIP6})" 2> /dev/null; then + echo "SKIP: IPv6s already in use. Skipping it" >&2 exit "${ksft_skip}" fi } @@ -278,11 +316,13 @@ function check_for_taskset() {
# This is necessary if running multiple tests in a row function pkill_socat() { - PROCESS_NAME="socat UDP-LISTEN:6666,fork ${OUTPUT_FILE}" + PROCESS_NAME4="socat UDP-LISTEN:6666,fork ${OUTPUT_FILE}" + PROCESS_NAME6="socat UDP6-LISTEN:6666,fork ${OUTPUT_FILE}" # socat runs under timeout(1), kill it if it is still alive # do not fail if socat doesn't exist anymore set +e - pkill -f "${PROCESS_NAME}" + pkill -f "${PROCESS_NAME4}" + pkill -f "${PROCESS_NAME6}" set -e }
@@ -294,3 +334,23 @@ function check_netconsole_module() { exit "${ksft_skip}" fi } + +# A wrapper to translate protocol version to udp version +function wait_for_port() { + local NAMESPACE=${1} + local PORT=${2} + IP_VERSION=${3} + + if [ "${IP_VERSION}" == "ipv6" ] + then + PROTOCOL="udp6" + else + PROTOCOL="udp" + fi + + wait_local_port_listen "${NAMESPACE}" "${PORT}" "${PROTOCOL}" + # even after the port is open, let's wait 1 second before writing + # otherwise the packet could be missed, and the test will fail. Happens + # more frequently on IPv6 + sleep 1 +} diff --git a/tools/testing/selftests/drivers/net/netcons_basic.sh b/tools/testing/selftests/drivers/net/netcons_basic.sh index 40a6ac6191b8b..c627993dc8605 100755 --- a/tools/testing/selftests/drivers/net/netcons_basic.sh +++ b/tools/testing/selftests/drivers/net/netcons_basic.sh @@ -36,30 +36,36 @@ trap cleanup EXIT # Run the test twice, with different format modes for FORMAT in "basic" "extended" do - echo "Running with target mode: ${FORMAT}" - # Create one namespace and two interfaces - set_network - # Create a dynamic target for netconsole - create_dynamic_target "${FORMAT}" - # Only set userdata for extended format - if [ "$FORMAT" == "extended" ] - then - # Set userdata "key" with the "value" value - set_user_data - fi - # Listed for netconsole port inside the namespace and destination interface - listen_port_and_save_to "${OUTPUT_FILE}" & - # Wait for socat to start and listen to the port. - wait_local_port_listen "${NAMESPACE}" "${PORT}" udp - # Send the message - echo "${MSG}: ${TARGET}" > /dev/kmsg - # Wait until socat saves the file to disk - busywait "${BUSYWAIT_TIMEOUT}" test -s "${OUTPUT_FILE}" + for IP_VERSION in "ipv6" "ipv4" + do + echo "Running with target mode: ${FORMAT} (${IP_VERSION})" + # Create one namespace and two interfaces + set_network "${IP_VERSION}" + # Create a dynamic target for netconsole + create_dynamic_target "${FORMAT}" + # Only set userdata for extended format + if [ "$FORMAT" == "extended" ] + then + # Set userdata "key" with the "value" value + set_user_data + fi + # Listed for netconsole port inside the namespace and destination interface + listen_port_and_save_to "${OUTPUT_FILE}" "${IP_VERSION}" & + # Wait for socat to start and listen to the port. + wait_for_port "${NAMESPACE}" "${PORT}" "${IP_VERSION}" + # Send the message + echo "${MSG}: ${TARGET}" > /dev/kmsg + # Wait until socat saves the file to disk + busywait "${BUSYWAIT_TIMEOUT}" test -s "${OUTPUT_FILE}"
- # Make sure the message was received in the dst part - # and exit - validate_result "${OUTPUT_FILE}" "${FORMAT}" - cleanup + # Make sure the message was received in the dst part + # and exit + validate_result "${OUTPUT_FILE}" "${FORMAT}" + # kill socat in case it is still running + pkill_socat + cleanup + echo "${FORMAT} : ${IP_VERSION} : Test passed" >&2 + done done
trap - EXIT