Introduce a new netconsole selftest to validate that netconsole is able to resume a deactivated target when the low level interface comes back.
The test setups the network using netdevsim, creates a netconsole target and then remove/add netdevsim in order to bring the same interfaces back. Afterwards, the test validates that the target works as expected.
Targets are created via cmdline parameters to the module to ensure that we are able to resume targets that were bound by mac and interface name.
Signed-off-by: Andre Carvalho asantostc@gmail.com --- tools/testing/selftests/drivers/net/Makefile | 1 + .../selftests/drivers/net/lib/sh/lib_netcons.sh | 35 ++++++-- .../selftests/drivers/net/netcons_resume.sh | 97 ++++++++++++++++++++++ 3 files changed, 128 insertions(+), 5 deletions(-)
diff --git a/tools/testing/selftests/drivers/net/Makefile b/tools/testing/selftests/drivers/net/Makefile index 33f4816216ec..7dc9e5b23d5b 100644 --- a/tools/testing/selftests/drivers/net/Makefile +++ b/tools/testing/selftests/drivers/net/Makefile @@ -17,6 +17,7 @@ TEST_PROGS := \ netcons_cmdline.sh \ netcons_fragmented_msg.sh \ netcons_overflow.sh \ + netcons_resume.sh \ netcons_sysdata.sh \ netcons_torture.sh \ netpoll_basic.py \ diff --git a/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh b/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh index 87f89fd92f8c..239f44d4a45d 100644 --- a/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh +++ b/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh @@ -203,19 +203,21 @@ function do_cleanup() { function cleanup_netcons() { # delete netconsole dynamic reconfiguration # do not fail if the target is already disabled - if [[ ! -d "${NETCONS_PATH}" ]] + local TARGET_PATH=${1:-${NETCONS_PATH}} + + if [[ ! -d "${TARGET_PATH}" ]] then # in some cases this is called before netcons path is created return fi - if [[ $(cat "${NETCONS_PATH}"/enabled) != 0 ]] + if [[ $(cat "${TARGET_PATH}"/enabled) != 0 ]] then - echo 0 > "${NETCONS_PATH}"/enabled || true + echo 0 > "${TARGET_PATH}"/enabled || true fi # Remove all the keys that got created during the selftest - find "${NETCONS_PATH}/userdata/" -mindepth 1 -type d -delete + find "${TARGET_PATH}/userdata/" -mindepth 1 -type d -delete # Remove the configfs entry - rmdir "${NETCONS_PATH}" + rmdir "${TARGET_PATH}" }
function cleanup() { @@ -377,6 +379,29 @@ function check_netconsole_module() { fi }
+function wait_target_state() { + local TARGET=${1} + local STATE=${2} + local TARGET_PATH="${NETCONS_CONFIGFS}"/"${TARGET}" + local ENABLED=0 + + if [ "${STATE}" == "enabled" ] + then + ENABLED=1 + fi + + if [ ! -d "$TARGET_PATH" ]; then + echo "FAIL: Target does not exist." >&2 + exit "${ksft_fail}" + fi + + local CHECK_CMD="grep "$ENABLED" "$TARGET_PATH/enabled"" + slowwait 2 sh -c "test -n "$($CHECK_CMD)"" || { + echo "FAIL: ${TARGET} is not ${STATE}." >&2 + exit "${ksft_fail}" + } +} + # A wrapper to translate protocol version to udp version function wait_for_port() { local NAMESPACE=${1} diff --git a/tools/testing/selftests/drivers/net/netcons_resume.sh b/tools/testing/selftests/drivers/net/netcons_resume.sh new file mode 100755 index 000000000000..b9f2d5a7dc59 --- /dev/null +++ b/tools/testing/selftests/drivers/net/netcons_resume.sh @@ -0,0 +1,97 @@ +#!/usr/bin/env bash +# SPDX-License-Identifier: GPL-2.0 + +# This test validates that netconsole is able to resume a target that was +# deactivated when its interface was removed when the interface is brought +# back up. +# +# The test configures a netconsole target and then removes netdevsim module to +# cause the interface to disappear. Targets are configured via cmdline to ensure +# targets bound by interface name and mac address can be resumed. +# The test verifies that the target moved to disabled state before adding +# netdevsim and the interface back. +# +# Finally, the test verifies that the target is re-enabled automatically and +# the message is received on the destination interface. +# +# Author: Andre Carvalho asantostc@gmail.com + +set -euo pipefail + +SCRIPTDIR=$(dirname "$(readlink -e "${BASH_SOURCE[0]}")") + +source "${SCRIPTDIR}"/lib/sh/lib_netcons.sh + +modprobe netdevsim 2> /dev/null || true +rmmod netconsole 2> /dev/null || true + +check_netconsole_module + +function cleanup() { + cleanup_netcons "${NETCONS_CONFIGFS}/cmdline0" + do_cleanup + rmmod netconsole +} + +trap cleanup EXIT + +# Run the test twice, with different cmdline parameters +for BINDMODE in "ifname" "mac" +do + echo "Running with bind mode: ${BINDMODE}" >&2 + # Set current loglevel to KERN_INFO(6), and default to KERN_NOTICE(5) + echo "6 5" > /proc/sys/kernel/printk + + # Create one namespace and two interfaces + set_network + + # Create the command line for netconsole, with the configuration from + # the function above + CMDLINE=$(create_cmdline_str "${BINDMODE}") + + # The content of kmsg will be save to the following file + OUTPUT_FILE="/tmp/${TARGET}-${BINDMODE}" + + # Load the module, with the cmdline set + modprobe netconsole "${CMDLINE}" + # Expose cmdline target in configfs + mkdir "${NETCONS_CONFIGFS}/cmdline0" + + # Target should be enabled + wait_target_state "cmdline0" "enabled" + + # Remove low level module + rmmod netdevsim + # Target should be disabled + wait_target_state "cmdline0" "disabled" + + # Add back low level module + modprobe netdevsim + # Recreate namespace and two interfaces + set_network + # Target should be enabled again + wait_target_state "cmdline0" "enabled" + + # Listen for netconsole port inside the namespace and destination + # interface + listen_port_and_save_to "${OUTPUT_FILE}" & + # Wait for socat to start and listen to the port. + wait_local_port_listen "${NAMESPACE}" "${PORT}" udp + # Send the message + echo "${MSG}: ${TARGET}" > /dev/kmsg + # Wait until socat saves the file to disk + busywait "${BUSYWAIT_TIMEOUT}" test -s "${OUTPUT_FILE}" + # Make sure the message was received in the dst part + # and exit + validate_msg "${OUTPUT_FILE}" + + # kill socat in case it is still running + pkill_socat + # Cleanup & unload the module + cleanup + + echo "${BINDMODE} : Test passed" >&2 +done + +trap - EXIT +exit "${ksft_pass}"