Add comprehensive selftest to verify: - Per-port actor priority setting via ad_actor_port_prio - Aggregator selection behavior with port_priority ad_select policy
Also move cmd_jq helper from forwarding/lib.sh to net/lib.sh for broader reusability across network selftests.
Here is the result output # ./bond_lacp_prio.sh TEST: bond 802.3ad (ad_actor_port_prio setting) [ OK ] TEST: bond 802.3ad (ad_actor_port_prio select) [ OK ] TEST: bond 802.3ad (ad_actor_port_prio switch) [ OK ]
Signed-off-by: Hangbin Liu liuhangbin@gmail.com --- .../selftests/drivers/net/bonding/Makefile | 3 +- .../drivers/net/bonding/bond_lacp_prio.sh | 107 ++++++++++++++++++ tools/testing/selftests/net/forwarding/lib.sh | 24 ---- tools/testing/selftests/net/lib.sh | 24 ++++ 4 files changed, 133 insertions(+), 25 deletions(-) create mode 100755 tools/testing/selftests/drivers/net/bonding/bond_lacp_prio.sh
diff --git a/tools/testing/selftests/drivers/net/bonding/Makefile b/tools/testing/selftests/drivers/net/bonding/Makefile index 44b98f17f8ff..3462783ed3ac 100644 --- a/tools/testing/selftests/drivers/net/bonding/Makefile +++ b/tools/testing/selftests/drivers/net/bonding/Makefile @@ -11,7 +11,8 @@ TEST_PROGS := \ bond_options.sh \ bond-eth-type-change.sh \ bond_macvlan_ipvlan.sh \ - bond_passive_lacp.sh + bond_passive_lacp.sh \ + bond_lacp_prio.sh
TEST_FILES := \ lag_lib.sh \ diff --git a/tools/testing/selftests/drivers/net/bonding/bond_lacp_prio.sh b/tools/testing/selftests/drivers/net/bonding/bond_lacp_prio.sh new file mode 100755 index 000000000000..5d067b8ee707 --- /dev/null +++ b/tools/testing/selftests/drivers/net/bonding/bond_lacp_prio.sh @@ -0,0 +1,107 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Testing if bond lacp per port priority works +# +# Switch (s_ns) Backup Switch (b_ns) +# +-------------------------+ +-------------------------+ +# | bond0 | | bond0 | +# | + | | + | +# | eth0 | eth1 | | eth0 | eth1 | +# | +---+---+ | | +---+---+ | +# | | | | | | | | +# +-------------------------+ +-------------------------+ +# | | | | +# +-----------------------------------------------------+ +# | | | | | | +# | +-------+---------+---------+-------+ | +# | eth0 eth1 | eth2 eth3 | +# | + | +# | bond0 | +# +-----------------------------------------------------+ +# Client (c_ns) + +lib_dir=$(dirname "$0") +# shellcheck disable=SC1091 +source "$lib_dir"/../../../net/lib.sh + +setup_links() +{ + # shellcheck disable=SC2154 + ip -n "${c_ns}" link add eth0 type veth peer name eth0 netns "${s_ns}" + ip -n "${c_ns}" link add eth1 type veth peer name eth1 netns "${s_ns}" + # shellcheck disable=SC2154 + ip -n "${c_ns}" link add eth2 type veth peer name eth0 netns "${b_ns}" + ip -n "${c_ns}" link add eth3 type veth peer name eth1 netns "${b_ns}" + + ip -n "${c_ns}" link add bond0 type bond mode 802.3ad miimon 100 \ + lacp_rate fast ad_select prio + ip -n "${s_ns}" link add bond0 type bond mode 802.3ad miimon 100 \ + lacp_rate fast + ip -n "${b_ns}" link add bond0 type bond mode 802.3ad miimon 100 \ + lacp_rate fast + + ip -n "${c_ns}" link set eth0 master bond0 + ip -n "${c_ns}" link set eth1 master bond0 + ip -n "${c_ns}" link set eth2 master bond0 + ip -n "${c_ns}" link set eth3 master bond0 + ip -n "${s_ns}" link set eth0 master bond0 + ip -n "${s_ns}" link set eth1 master bond0 + ip -n "${b_ns}" link set eth0 master bond0 + ip -n "${b_ns}" link set eth1 master bond0 + + ip -n "${c_ns}" link set bond0 up + ip -n "${s_ns}" link set bond0 up + ip -n "${b_ns}" link set bond0 up +} + +test_port_prio_setting() +{ + RET=0 + ip -n "${c_ns}" link set eth0 type bond_slave actor_port_prio 1000 + prio=$(cmd_jq "ip -n ${c_ns} -d -j link show eth0" \ + ".[].linkinfo.info_slave_data.actor_port_prio") + [ "$prio" -ne 1000 ] && RET=1 + ip -n "${c_ns}" link set eth2 type bond_slave actor_port_prio 10 + prio=$(cmd_jq "ip -n ${c_ns} -d -j link show eth2" \ + ".[].linkinfo.info_slave_data.actor_port_prio") + [ "$prio" -ne 10 ] && RET=1 +} + +test_agg_reselect() +{ + local bond_agg_id slave_agg_id + local expect_slave="$1" + RET=0 + + # Trigger link state change to reselect the aggregator + ip -n "${c_ns}" link set eth1 down + sleep 1 + ip -n "${c_ns}" link set eth1 up + + bond_agg_id=$(cmd_jq "ip -n ${c_ns} -d -j link show bond0" \ + ".[].linkinfo.info_data.ad_info.aggregator") + slave_agg_id=$(cmd_jq "ip -n ${c_ns} -d -j link show $expect_slave" \ + ".[].linkinfo.info_slave_data.ad_aggregator_id") + # shellcheck disable=SC2034 + [ "${bond_agg_id}" -ne "${slave_agg_id}" ] && \ + RET=1 +} + +trap cleanup_all_ns EXIT +setup_ns c_ns s_ns b_ns +setup_links + +test_port_prio_setting +log_test "bond 802.3ad" "actor_port_prio setting" + +test_agg_reselect eth0 +log_test "bond 802.3ad" "actor_port_prio select" + +# Change the actor port prio and re-test +ip -n "${c_ns}" link set eth0 type bond_slave actor_port_prio 10 +ip -n "${c_ns}" link set eth2 type bond_slave actor_port_prio 1000 +test_agg_reselect eth2 +log_test "bond 802.3ad" "actor_port_prio switch" + +exit "${EXIT_STATUS}" diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh index 890b3374dacd..08121cb9dc26 100644 --- a/tools/testing/selftests/net/forwarding/lib.sh +++ b/tools/testing/selftests/net/forwarding/lib.sh @@ -571,30 +571,6 @@ wait_for_dev() fi }
-cmd_jq() -{ - local cmd=$1 - local jq_exp=$2 - local jq_opts=$3 - local ret - local output - - output="$($cmd)" - # it the command fails, return error right away - ret=$? - if [[ $ret -ne 0 ]]; then - return $ret - fi - output=$(echo $output | jq -r $jq_opts "$jq_exp") - ret=$? - if [[ $ret -ne 0 ]]; then - return $ret - fi - echo $output - # return success only in case of non-empty output - [ ! -z "$output" ] -} - pre_cleanup() { if [ "${PAUSE_ON_CLEANUP}" = "yes" ]; then diff --git a/tools/testing/selftests/net/lib.sh b/tools/testing/selftests/net/lib.sh index c7add0dc4c60..4dca6893aa8a 100644 --- a/tools/testing/selftests/net/lib.sh +++ b/tools/testing/selftests/net/lib.sh @@ -645,3 +645,27 @@ wait_local_port_listen() sleep 0.1 done } + +cmd_jq() +{ + local cmd=$1 + local jq_exp=$2 + local jq_opts=$3 + local ret + local output + + output="$($cmd)" + # it the command fails, return error right away + ret=$? + if [[ $ret -ne 0 ]]; then + return $ret + fi + output=$(echo $output | jq -r $jq_opts "$jq_exp") + ret=$? + if [[ $ret -ne 0 ]]; then + return $ret + fi + echo $output + # return success only in case of non-empty output + [ ! -z "$output" ] +}