Now that per-port actor priority is supported via ad_actor_port_prio, enable a new ad_select policy to choose the aggregator based on port priority.
This allows users to influence aggregator selection by assigning higher or lower priorities to individual ports.
Signed-off-by: Hangbin Liu liuhangbin@gmail.com --- Documentation/networking/bonding.rst | 9 ++++++++- drivers/net/bonding/bond_3ad.c | 29 ++++++++++++++++++++++++++++ drivers/net/bonding/bond_options.c | 1 + include/net/bond_3ad.h | 1 + 4 files changed, 39 insertions(+), 1 deletion(-)
diff --git a/Documentation/networking/bonding.rst b/Documentation/networking/bonding.rst index 5e105e7ac8e6..a234ec12ece7 100644 --- a/Documentation/networking/bonding.rst +++ b/Documentation/networking/bonding.rst @@ -250,7 +250,14 @@ ad_select ports (slaves). Reselection occurs as described under the "bandwidth" setting, above.
- The bandwidth and count selection policies permit failover of + prio or 3 + + The active aggregator is chosen by the highest total sum of + actor port priorities across its active ports. Note this + priority is ad_actor_port_prio, not per port prio, which is + used for primary reselect. + + The bandwidth, count and prio selection policies permit failover of 802.3ad aggregations when partial failure of the active aggregator occurs. This keeps the aggregator with the highest availability (either in bandwidth or in number of ports) active at all times. diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index 4a1b2f01fe37..6f8a406ed34a 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -747,6 +747,20 @@ static int __agg_active_ports(struct aggregator *agg) return active; }
+static unsigned int __agg_ports_priority(struct aggregator *agg) +{ + struct port *port; + unsigned int prio = 0; + + for (port = agg->lag_ports; port; + port = port->next_port_in_aggregator) { + if (port->is_enabled) + prio += port->actor_port_priority; + } + + return prio; +} + /** * __get_agg_bandwidth - get the total bandwidth of an aggregator * @aggregator: the aggregator we're looking at @@ -1695,6 +1709,9 @@ static struct aggregator *ad_agg_selection_test(struct aggregator *best, * BOND_AD_COUNT: Select by count of ports. If count is equal, * select by bandwidth. * + * BOND_AD_PRIO: Select by total priority of ports. If priority + * is equal, select by count. + * * BOND_AD_STABLE, BOND_AD_BANDWIDTH: Select by bandwidth. */ if (!best) @@ -1713,6 +1730,14 @@ static struct aggregator *ad_agg_selection_test(struct aggregator *best, return best;
switch (__get_agg_selection_mode(curr->lag_ports)) { + case BOND_AD_PRIO: + if (__agg_ports_priority(curr) > __agg_ports_priority(best)) + return curr; + + if (__agg_ports_priority(curr) < __agg_ports_priority(best)) + return best; + + fallthrough; case BOND_AD_COUNT: if (__agg_active_ports(curr) > __agg_active_ports(best)) return curr; @@ -1778,6 +1803,10 @@ static int agg_device_up(const struct aggregator *agg) * (slaves), and reselect whenever a link state change takes place or the * set of slaves in the bond changes. * + * BOND_AD_PRIO: select the aggregator with highest total priority of ports + * (slaves), and reselect whenever a link state change takes place or the + * set of slaves in the bond changes. + * * FIXME: this function MUST be called with the first agg in the bond, or * __get_active_agg() won't work correctly. This function should be better * called with the bond itself, and retrieve the first agg from it. diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c index 2b8606b4e4f5..708ca1f18a00 100644 --- a/drivers/net/bonding/bond_options.c +++ b/drivers/net/bonding/bond_options.c @@ -163,6 +163,7 @@ static const struct bond_opt_value bond_ad_select_tbl[] = { { "stable", BOND_AD_STABLE, BOND_VALFLAG_DEFAULT}, { "bandwidth", BOND_AD_BANDWIDTH, 0}, { "count", BOND_AD_COUNT, 0}, + { "prio", BOND_AD_PRIO, 0}, { NULL, -1, 0}, };
diff --git a/include/net/bond_3ad.h b/include/net/bond_3ad.h index bf551ca70359..34495df965f0 100644 --- a/include/net/bond_3ad.h +++ b/include/net/bond_3ad.h @@ -26,6 +26,7 @@ enum { BOND_AD_STABLE = 0, BOND_AD_BANDWIDTH = 1, BOND_AD_COUNT = 2, + BOND_AD_PRIO = 3, };
/* rx machine states(43.4.11 in the 802.3ad standard) */