Introduce the capability to send TCP traffic over IPv6 to nft_flowtable netfilter selftest.
Reviewed-by: Simon Horman horms@kernel.org Signed-off-by: Lorenzo Bianconi lorenzo@kernel.org --- Changes in v2: - Fix checkpatch warnings - Add TCP test for IPv6 IPsec traffic - Link to v1: https://lore.kernel.org/r/20251122-nft_flowtable-sh-ipv6-tcp-v1-1-4480d3c863... --- .../selftests/net/netfilter/nft_flowtable.sh | 57 ++++++++++++++++------ 1 file changed, 43 insertions(+), 14 deletions(-)
diff --git a/tools/testing/selftests/net/netfilter/nft_flowtable.sh b/tools/testing/selftests/net/netfilter/nft_flowtable.sh index 1fbfc8ad8dcdc5db2ab1a1ea9310f655d09eee83..a68bc882fa4ec0175d8db3df8337bb5fe6c42e26 100755 --- a/tools/testing/selftests/net/netfilter/nft_flowtable.sh +++ b/tools/testing/selftests/net/netfilter/nft_flowtable.sh @@ -127,6 +127,8 @@ ip -net "$nsr1" addr add fee1:2::1/64 dev veth1 nodad ip -net "$nsr2" addr add 192.168.10.2/24 dev veth0 ip -net "$nsr2" addr add fee1:2::2/64 dev veth0 nodad
+ip netns exec "$nsr1" sysctl net.ipv6.conf.all.forwarding=1 > /dev/null +ip netns exec "$nsr2" sysctl net.ipv6.conf.all.forwarding=1 > /dev/null for i in 0 1; do ip netns exec "$nsr1" sysctl net.ipv4.conf.veth$i.forwarding=1 > /dev/null ip netns exec "$nsr2" sysctl net.ipv4.conf.veth$i.forwarding=1 > /dev/null @@ -153,7 +155,9 @@ ip -net "$ns1" route add default via dead:1::1 ip -net "$ns2" route add default via dead:2::1
ip -net "$nsr1" route add default via 192.168.10.2 +ip -6 -net "$nsr1" route add default via fee1:2::2 ip -net "$nsr2" route add default via 192.168.10.1 +ip -6 -net "$nsr2" route add default via fee1:2::1
ip netns exec "$nsr1" nft -f - <<EOF table inet filter { @@ -352,8 +356,9 @@ test_tcp_forwarding_ip() local nsa=$1 local nsb=$2 local pmtu=$3 - local dstip=$4 - local dstport=$5 + local proto=$4 + local dstip=$5 + local dstport=$6 local lret=0 local socatc local socatl @@ -363,12 +368,14 @@ test_tcp_forwarding_ip() infile="$nsin_small" fi
- timeout "$SOCAT_TIMEOUT" ip netns exec "$nsb" socat -4 TCP-LISTEN:12345,reuseaddr STDIO < "$infile" > "$ns2out" & + timeout "$SOCAT_TIMEOUT" ip netns exec "$nsb" socat -${proto} \ + TCP"${proto}"-LISTEN:12345,reuseaddr STDIO < "$infile" > "$ns2out" & lpid=$!
busywait 1000 listener_ready
- timeout "$SOCAT_TIMEOUT" ip netns exec "$nsa" socat -4 TCP:"$dstip":"$dstport" STDIO < "$infile" > "$ns1out" + timeout "$SOCAT_TIMEOUT" ip netns exec "$nsa" socat -${proto} \ + TCP"${proto}":"$dstip":"$dstport" STDIO < "$infile" > "$ns1out" socatc=$?
wait $lpid @@ -394,8 +401,11 @@ test_tcp_forwarding_ip() test_tcp_forwarding() { local pmtu="$3" + local proto="$4" + local dstip="$5" + local dstport="$6"
- test_tcp_forwarding_ip "$1" "$2" "$pmtu" 10.0.2.99 12345 + test_tcp_forwarding_ip "$1" "$2" "$pmtu" "$proto" "$dstip" "$dstport"
return $? } @@ -403,6 +413,9 @@ test_tcp_forwarding() test_tcp_forwarding_set_dscp() { local pmtu="$3" + local proto="$4" + local dstip="$5" + local dstport="$6"
ip netns exec "$nsr1" nft -f - <<EOF table netdev dscpmangle { @@ -413,7 +426,7 @@ table netdev dscpmangle { } EOF if [ $? -eq 0 ]; then - test_tcp_forwarding_ip "$1" "$2" "$3" 10.0.2.99 12345 + test_tcp_forwarding_ip "$1" "$2" "$pmtu" "$proto" "$dstip" "$dstport" check_dscp "dscp_ingress" "$pmtu"
ip netns exec "$nsr1" nft delete table netdev dscpmangle @@ -430,7 +443,7 @@ table netdev dscpmangle { } EOF if [ $? -eq 0 ]; then - test_tcp_forwarding_ip "$1" "$2" "$pmtu" 10.0.2.99 12345 + test_tcp_forwarding_ip "$1" "$2" "$pmtu" "$proto" "$dstip" "$dstport" check_dscp "dscp_egress" "$pmtu"
ip netns exec "$nsr1" nft delete table netdev dscpmangle @@ -441,7 +454,7 @@ fi # partial. If flowtable really works, then both dscp-is-0 and dscp-is-cs3 # counters should have seen packets (before and after ft offload kicks in). ip netns exec "$nsr1" nft -a insert rule inet filter forward ip dscp set cs3 - test_tcp_forwarding_ip "$1" "$2" "$pmtu" 10.0.2.99 12345 + test_tcp_forwarding_ip "$1" "$2" "$pmtu" "$proto" "$dstip" "$dstport" check_dscp "dscp_fwd" "$pmtu" }
@@ -455,7 +468,7 @@ test_tcp_forwarding_nat()
[ "$pmtu" -eq 0 ] && what="$what (pmtu disabled)"
- test_tcp_forwarding_ip "$nsa" "$nsb" "$pmtu" 10.0.2.99 12345 + test_tcp_forwarding_ip "$nsa" "$nsb" "$pmtu" 4 10.0.2.99 12345 lret=$?
if [ "$lret" -eq 0 ] ; then @@ -465,7 +478,7 @@ test_tcp_forwarding_nat() echo "PASS: flow offload for ns1/ns2 with masquerade $what" fi
- test_tcp_forwarding_ip "$1" "$2" "$pmtu" 10.6.6.6 1666 + test_tcp_forwarding_ip "$1" "$2" "$pmtu" 4 10.6.6.6 1666 lret=$? if [ "$pmtu" -eq 1 ] ;then check_counters "flow offload for ns1/ns2 with dnat $what" @@ -487,7 +500,7 @@ make_file "$nsin_small" "$filesize_small" # Due to MTU mismatch in both directions, all packets (except small packets like pure # acks) have to be handled by normal forwarding path. Therefore, packet counters # are not checked. -if test_tcp_forwarding "$ns1" "$ns2" 0; then +if test_tcp_forwarding "$ns1" "$ns2" 0 4 10.0.2.99 12345; then echo "PASS: flow offloaded for ns1/ns2" else echo "FAIL: flow offload for ns1/ns2:" 1>&2 @@ -495,6 +508,14 @@ else ret=1 fi
+if test_tcp_forwarding "$ns1" "$ns2" 0 6 "[dead:2::99]" 12345; then + echo "PASS: IPv6 flow offloaded for ns1/ns2" +else + echo "FAIL: IPv6 flow offload for ns1/ns2:" 1>&2 + ip netns exec "$nsr1" nft list ruleset + ret=1 +fi + # delete default route, i.e. ns2 won't be able to reach ns1 and # will depend on ns1 being masqueraded in nsr1. # expect ns1 has nsr1 address. @@ -520,7 +541,7 @@ table ip nat { EOF
check_dscp "dscp_none" "0" -if ! test_tcp_forwarding_set_dscp "$ns1" "$ns2" 0 ""; then +if ! test_tcp_forwarding_set_dscp "$ns1" "$ns2" 0 4 10.0.2.99 12345; then echo "FAIL: flow offload for ns1/ns2 with dscp update and no pmtu discovery" 1>&2 exit 0 fi @@ -546,7 +567,7 @@ ip netns exec "$ns2" sysctl net.ipv4.ip_no_pmtu_disc=0 > /dev/null ip netns exec "$nsr1" nft reset counters table inet filter >/dev/null ip netns exec "$ns2" nft reset counters table inet filter >/dev/null
-if ! test_tcp_forwarding_set_dscp "$ns1" "$ns2" 1 ""; then +if ! test_tcp_forwarding_set_dscp "$ns1" "$ns2" 1 4 10.0.2.99 12345; then echo "FAIL: flow offload for ns1/ns2 with dscp update and pmtu discovery" 1>&2 exit 0 fi @@ -752,7 +773,7 @@ ip -net "$ns2" route del 192.168.10.1 via 10.0.2.1 ip -net "$ns2" route add default via 10.0.2.1 ip -net "$ns2" route add default via dead:2::1
-if test_tcp_forwarding "$ns1" "$ns2" 1; then +if test_tcp_forwarding "$ns1" "$ns2" 1 4 10.0.2.99 12345; then check_counters "ipsec tunnel mode for ns1/ns2" else echo "FAIL: ipsec tunnel mode for ns1/ns2" @@ -760,6 +781,14 @@ else ip netns exec "$nsr1" cat /proc/net/xfrm_stat 1>&2 fi
+if test_tcp_forwarding "$ns1" "$ns2" 1 6 "[dead:2::99]" 12345; then + check_counters "IPv6 ipsec tunnel mode for ns1/ns2" +else + echo "FAIL: IPv6 ipsec tunnel mode for ns1/ns2" + ip netns exec "$nsr1" nft list ruleset 1>&2 + ip netns exec "$nsr1" cat /proc/net/xfrm_stat 1>&2 +fi + if [ "$1" = "" ]; then low=1280 mtu=$((65536 - low))
--- base-commit: b044de87bae07a50b2d99d9acfea5a4323da95ed change-id: 20251122-nft_flowtable-sh-ipv6-tcp-76f3d28169d1
Best regards,