Re: [PATCH v1 2/2] kunit: tool: parse KTAP compliant test output

On Tue, Nov 15, 2022 at 2:27 AM David Gow davidgow@google.com wrote:

On Sat, Nov 5, 2022 at 3:48 AM Rae Moar rmoar@google.com wrote:

...

Change the KUnit parser to be able to parse test output that complies with the KTAP version 1 specification format found here: https://kernel.org/doc/html/latest/dev-tools/ktap.html. Ensure the parser is able to parse tests with the original KUnit test output format as well.

KUnit parser now accepts any of the following test output formats:

Original KUnit test output format:

TAP version 14 1..1 # Subtest: kunit-test-suite 1..3 ok 1 - kunit_test_1 ok 2 - kunit_test_2 ok 3 - kunit_test_3 # kunit-test-suite: pass:3 fail:0 skip:0 total:3 # Totals: pass:3 fail:0 skip:0 total:3 ok 1 - kunit-test-suite

KTAP version 1 test output format:

KTAP version 1 1..1 KTAP version 1 1..3 ok 1 kunit_test_1 ok 2 kunit_test_2 ok 3 kunit_test_3 ok 1 kunit-test-suite

New KUnit test output format (preferred for KUnit tests):

KTAP version 1 1..1 # Subtest: kunit-test-suite KTAP version 1 1..3 ok 1 kunit_test_1 ok 2 kunit_test_2 ok 3 kunit_test_3 # kunit-test-suite: pass:3 fail:0 skip:0 total:3 # Totals: pass:3 fail:0 skip:0 total:3 ok 1 kunit-test-suite

Signed-off-by: Rae Moar rmoar@google.com

Note: this patch is based on the linux-kselftest/kunit branch.

Looks good to me. Some minor thoughts:

• As Daniel mentioned, can we think of a better placeholder name for

tests without Subtest lines? One thought is to just leave it as the empty string?

I am definitely open to changing this placeholder name.

The ideas I thought of are: "Test suite", just "Test", or just an empty string. "Test" or empty string may be less confusing. What do people prefer?

• Would it make sense to support the case where the "Subtest" line

sits between the KTAP version line and the test plan as well. While that's not necessary (and does violate v1 of the KTAP spec), I suspect something similar would be useful in KTAP v2 for, e.g., individual module results.

Similar to the comments on the first patch, I personally think we could make those changes later in combination with the KTAP v2 development.

• As mentioned in patch 1, it'd be nice to swap the ordering of the two patches.

Yes, definitely a great idea. Will make a v2 with the patches swapped.

None of those are showstoppers, so if you disagree, we can probably accept them as-is, but they might make future changes easier.

Reviewed-by: David Gow davidgow@google.com

Cheers, -- David

...

tools/testing/kunit/kunit_parser.py | 69 ++++++++++++------- tools/testing/kunit/kunit_tool_test.py | 8 +++ .../test_data/test_parse_ktap_output.log | 8 +++ 3 files changed, 60 insertions(+), 25 deletions(-) create mode 100644 tools/testing/kunit/test_data/test_parse_ktap_output.log

diff --git a/tools/testing/kunit/kunit_parser.py b/tools/testing/kunit/kunit_parser.py index a56c75a973b5..abb69f898263 100644 --- a/tools/testing/kunit/kunit_parser.py +++ b/tools/testing/kunit/kunit_parser.py @@ -441,6 +441,7 @@ def parse_diagnostic(lines: LineStream) -> List[str]: - '# Subtest: [test name]' - '[ok|not ok] [test number] [-] [test name] [optional skip directive]'

•   - 'KTAP version [version number]'
  
    Parameters:
    lines - LineStream of KTAP output to parse
  

@@ -449,8 +450,9 @@ def parse_diagnostic(lines: LineStream) -> List[str]: Log of diagnostic lines """ log = [] # type: List[str]

•   while lines and not TEST_RESULT.match(lines.peek()) and not \
  

•                   TEST_HEADER.match(lines.peek()):
  

•   non_diagnostic_lines = [TEST_RESULT, TEST_HEADER, KTAP_START]
  

•   while lines and not any(re.match(lines.peek())
  

•                   for re in non_diagnostic_lines):
            log.append(lines.pop())
    return log
  
  

@@ -496,6 +498,12 @@ def print_test_header(test: Test) -> None: test - Test object representing current test being printed """ message = test.name

•   if message == "":
  

•           # KUnit tests print a Subtest header line that provides the name
  

•           # of the test suite. But the subtest header line isn't required
  

•           # by the KTAP spec, so use a placeholder name "Test suite" in that
  

•           # case.
  

•           message = "Test suite"
    if test.expected_count:
            if test.expected_count == 1:
                    message += ' (1 subtest)'
  

@@ -647,13 +655,13 @@ def bubble_up_test_results(test: Test) -> None: elif test.counts.get_status() == TestStatus.TEST_CRASHED: test.status = TestStatus.TEST_CRASHED

-def parse_test(lines: LineStream, expected_num: int, log: List[str]) -> Test: +def parse_test(lines: LineStream, expected_num: int, log: List[str], is_subtest: bool) -> Test: """ Finds next test to parse in LineStream, creates new Test object, parses any subtests of the test, populates Test object with all information (status, name) about the test and the Test objects for any subtests, and then returns the Test object. The method accepts

•   three formats of tests:
  

•   four formats of tests:
  
    Accepted test formats:
  
  

@@ -674,6 +682,16 @@ def parse_test(lines: LineStream, expected_num: int, log: List[str]) -> Test: [subtests] ok 1 name

•   - KTAP subtest header (in compliance with KTAP specification)
  

•   Example:
  

• # May include subtest header line here

•   KTAP version 1
  

•   1..3
  

•   [subtests]
  

•   ok 1 name
  

•   - Test result line
  
    Example:
  

@@ -685,6 +703,7 @@ def parse_test(lines: LineStream, expected_num: int, log: List[str]) -> Test: expected_num - expected test number for test to be parsed log - list of strings containing any preceding diagnostic lines corresponding to the current test

•   is_subtest - boolean indicating whether test is a subtest
  
    Return:
    Test object populated with characteristics and any subtests
  

@@ -692,21 +711,22 @@ def parse_test(lines: LineStream, expected_num: int, log: List[str]) -> Test: test = Test() test.log.extend(log) parent_test = False

•   main = parse_ktap_header(lines, test)
  

•   if main:
  

•           # If KTAP/TAP header is found, attempt to parse
  

•           # test plan
  

•   if not is_subtest:
  

•           # If parsing the main test, attempt to parse KTAP/TAP header
  

•           # and test plan
            test.name = "main"
  

•           parse_ktap_header(lines, test)
            parse_test_plan(lines, test)
            parent_test = True
    else:
  

•           # If KTAP/TAP header is not found, test must be subtest
  

•           # header or test result line so parse attempt to parser
  

•           # subtest header
  

•           parent_test = parse_test_header(lines, test)
  

•           # If test is a subtest, attempt to parse test suite header
  

•           # (either subtest line and/or KTAP/TAP version line)
  

•           subtest_line = parse_test_header(lines, test)
  

•           ktap_line = parse_ktap_header(lines, test)
  

•           parent_test = subtest_line or ktap_line
            if parent_test:
  

•                   # If subtest header is found, attempt to parse
  

•                   # test plan and print header
  

•                   # If subtest header and/or KTAP/version line is found, attempt
  

•                   # to parse test plan and print header
                    parse_test_plan(lines, test)
                    print_test_header(test)
    expected_count = test.expected_count
  

@@ -721,7 +741,7 @@ def parse_test(lines: LineStream, expected_num: int, log: List[str]) -> Test: sub_log = parse_diagnostic(lines) sub_test = Test() if not lines or (peek_test_name_match(lines, test) and

•                           not main):
  

•                           is_subtest):
                    if expected_count and test_num <= expected_count:
                            # If parser reaches end of test before
                            # parsing expected number of subtests, print
  

@@ -735,20 +755,19 @@ def parse_test(lines: LineStream, expected_num: int, log: List[str]) -> Test: test.log.extend(sub_log) break else:

•                   sub_test = parse_test(lines, test_num, sub_log)
  

•                   sub_test = parse_test(lines, test_num, sub_log, True)
            subtests.append(sub_test)
            test_num += 1
    test.subtests = subtests
  

•   if not main:
  

•   if is_subtest:
            # If not main test, look for test result line
            test.log.extend(parse_diagnostic(lines))
  

•           if (parent_test and peek_test_name_match(lines, test)) or \
  

•                           not parent_test:
  

•                   parse_test_result(lines, test, expected_num)
  

•           else:
  

•           if subtest_line and not peek_test_name_match(lines, test):
                    test.add_error('missing subtest result line!')
  

•           else:
  

•                   parse_test_result(lines, test, expected_num)
  
  

•   # Check for there being no tests
  

•   # Check for there being no subtests within parent test
    if parent_test and len(subtests) == 0:
            # Don't override a bad status if this test had one reported.
            # Assumption: no subtests means CRASHED is from Test.__init__()
  

@@ -758,11 +777,11 @@ def parse_test(lines: LineStream, expected_num: int, log: List[str]) -> Test:

    # Add statuses to TestCounts attribute in Test object
    bubble_up_test_results(test)

•   if parent_test and not main:
  

•   if parent_test and is_subtest:
            # If test has subtests and is not the main test object, print
            # footer.
            print_test_footer(test)
  

•   elif not main:
  

•   elif is_subtest:
            print_test_result(test)
    return test
  
  

@@ -785,7 +804,7 @@ def parse_run_tests(kernel_output: Iterable[str]) -> Test: test.add_error('could not find any KTAP output!') test.status = TestStatus.FAILURE_TO_PARSE_TESTS else:

•           test = parse_test(lines, 0, [])
  

•           test = parse_test(lines, 0, [], False)
            if test.status != TestStatus.NO_TESTS:
                    test.status = test.counts.get_status()
    stdout.print_with_timestamp(DIVIDER)
  

diff --git a/tools/testing/kunit/kunit_tool_test.py b/tools/testing/kunit/kunit_tool_test.py index 90c65b072be9..7c2e2a45f330 100755 --- a/tools/testing/kunit/kunit_tool_test.py +++ b/tools/testing/kunit/kunit_tool_test.py @@ -312,6 +312,14 @@ class KUnitParserTest(unittest.TestCase): self.assertEqual(kunit_parser._summarize_failed_tests(result), 'Failures: all_failed_suite, some_failed_suite.test2')

•   def test_ktap_format(self):
  

•           ktap_log = test_data_path('test_parse_ktap_output.log')
  

•           with open(ktap_log) as file:
  

•                   result = kunit_parser.parse_run_tests(file.readlines())
  

•           self.assertEqual(result.counts, kunit_parser.TestCounts(passed=3))
  

•           self.assertEqual('suite', result.subtests[0].name)
  

•           self.assertEqual('case_1', result.subtests[0].subtests[0].name)
  

•           self.assertEqual('case_2', result.subtests[0].subtests[1].name)
  
  

def line_stream_from_strs(strs: Iterable[str]) -> kunit_parser.LineStream: return kunit_parser.LineStream(enumerate(strs, start=1)) diff --git a/tools/testing/kunit/test_data/test_parse_ktap_output.log b/tools/testing/kunit/test_data/test_parse_ktap_output.log new file mode 100644 index 000000000000..ccdf244e5303 --- /dev/null +++ b/tools/testing/kunit/test_data/test_parse_ktap_output.log @@ -0,0 +1,8 @@ +KTAP version 1 +1..1

• KTAP version 1
• 1..3
• ok 1 case_1
• ok 2 case_2
• ok 3 case_3

+ok 1 suite

2.38.1.431.g37b22c650d-goog