Introduce run.sh, a script to help with running VFIO selftests. The script is intended to be used for both humans manually running VFIO selftests, and to incorporate into test automation where VFIO selftests may run alongside other tests. As such the script aims to be hermetic, returning the system to the state it was before the test started.
The script takes as input the BDF of a device to use and a command to run (typically the command would be a VFIO selftest). e.g.
$ ./run.sh -d 0000:6a:01.0 ./vfio_pci_device_test
or
$ ./run.sh -d 0000:6a:01.0 -- ./vfio_pci_device_test
The script then handles unbinding device 0000:6a:01.0 from its current driver, binding it to vfio-pci, running the test, unbinding from vfio-pci, and binding back to the original driver.
When run.sh runs the provided test, it does so by appending the BDF as the last parameter. For example:
$ ./run.sh -d 0000:6a:01.0 -- echo hello
Results in the following being printed to stdout:
hello 0000:6a:01.0
The script also supports a mode where it can break out into a shell so that multiple tests can be run manually.
$ ./run.sh -d 0000:6a:01.0 -s $ echo $VFIO_SELFTESTS_BDF $ ./vfio_pci_device_test $ exit
Choosing which device to use is up to the user.
In the future this script should be extensible to tests that want to use multiple devices. The script can support accepting -d BDF multiple times and parse them into an array, setup all the devices, pass the list of BDFs to the test, and then cleanup all the devices.
Signed-off-by: David Matlack dmatlack@google.com --- tools/testing/selftests/vfio/Makefile | 1 + tools/testing/selftests/vfio/run.sh | 109 ++++++++++++++++++++++++++ 2 files changed, 110 insertions(+) create mode 100755 tools/testing/selftests/vfio/run.sh
diff --git a/tools/testing/selftests/vfio/Makefile b/tools/testing/selftests/vfio/Makefile index ee09c027ade5..324ba0175a33 100644 --- a/tools/testing/selftests/vfio/Makefile +++ b/tools/testing/selftests/vfio/Makefile @@ -3,6 +3,7 @@ TEST_GEN_PROGS += vfio_dma_mapping_test TEST_GEN_PROGS += vfio_iommufd_setup_test TEST_GEN_PROGS += vfio_pci_device_test TEST_GEN_PROGS += vfio_pci_driver_test +TEST_PROGS_EXTENDED := run.sh include ../lib.mk include lib/libvfio.mk
diff --git a/tools/testing/selftests/vfio/run.sh b/tools/testing/selftests/vfio/run.sh new file mode 100755 index 000000000000..0476b6d7adc3 --- /dev/null +++ b/tools/testing/selftests/vfio/run.sh @@ -0,0 +1,109 @@ +# SPDX-License-Identifier: GPL-2.0-or-later + +# Global variables initialized in main() and then used during cleanup() when +# the script exits. +declare DEVICE_BDF +declare NEW_DRIVER +declare OLD_DRIVER +declare OLD_NUMVFS +declare DRIVER_OVERRIDE + +function write_to() { + # Unfortunately set -x does not show redirects so use echo to manually + # tell the user what commands are being run. + echo "+ echo "${2}" > ${1}" + echo "${2}" > ${1} +} + +function bind() { + write_to /sys/bus/pci/drivers/${2}/bind ${1} +} + +function unbind() { + write_to /sys/bus/pci/drivers/${2}/unbind ${1} +} + +function set_sriov_numvfs() { + write_to /sys/bus/pci/devices/${1}/sriov_numvfs ${2} +} + +function set_driver_override() { + write_to /sys/bus/pci/devices/${1}/driver_override ${2} +} + +function clear_driver_override() { + set_driver_override ${1} "" +} + +function cleanup() { + if [ "${NEW_DRIVER}" ]; then unbind ${DEVICE_BDF} ${NEW_DRIVER} ; fi + if [ "${DRIVER_OVERRIDE}" ]; then clear_driver_override ${DEVICE_BDF} ; fi + if [ "${OLD_DRIVER}" ]; then bind ${DEVICE_BDF} ${OLD_DRIVER} ; fi + if [ "${OLD_NUMVFS}" ]; then set_sriov_numvfs ${DEVICE_BDF} ${OLD_NUMVFS} ; fi +} + +function usage() { + echo "usage: $0 [-d segment:bus:device.function] [-s] [-h] [cmd ...]" >&2 + echo >&2 + echo " -d: The BDF of the device to use for the test (required)" >&2 + echo " -h: Show this help message" >&2 + echo " -s: Drop into a shell rather than running a command" >&2 + echo >&2 + echo " cmd: The command to run and arguments to pass to it." >&2 + echo " Required when not using -s. The SBDF will be " >&2 + echo " appended to the argument list." >&2 + exit 1 +} + +function main() { + local shell + + while getopts "d:hs" opt; do + case $opt in + d) DEVICE_BDF="$OPTARG" ;; + s) shell=true ;; + *) usage ;; + esac + done + + # Shift past all optional arguments. + shift $((OPTIND - 1)) + + # Check that the user passed in the command to run. + [ ! "${shell}" ] && [ $# = 0 ] && usage + + # Check that the user passed in a BDF. + [ "${DEVICE_BDF}" ] || usage + + trap cleanup EXIT + set -e + + test -d /sys/bus/pci/devices/${DEVICE_BDF} + + if [ -f /sys/bus/pci/devices/${DEVICE_BDF}/sriov_numvfs ]; then + OLD_NUMVFS=$(cat /sys/bus/pci/devices/${DEVICE_BDF}/sriov_numvfs) + set_sriov_numvfs ${DEVICE_BDF} 0 + fi + + if [ -L /sys/bus/pci/devices/${DEVICE_BDF}/driver ]; then + OLD_DRIVER=$(basename $(readlink -m /sys/bus/pci/devices/${DEVICE_BDF}/driver)) + unbind ${DEVICE_BDF} ${OLD_DRIVER} + fi + + set_driver_override ${DEVICE_BDF} vfio-pci + DRIVER_OVERRIDE=true + + bind ${DEVICE_BDF} vfio-pci + NEW_DRIVER=vfio-pci + + echo + if [ "${shell}" ]; then + echo "Dropping into ${SHELL} with VFIO_SELFTESTS_BDF=${DEVICE_BDF}" + VFIO_SELFTESTS_BDF=${DEVICE_BDF} ${SHELL} + else + "$@" ${DEVICE_BDF} + fi + echo +} + +main "$@"