September 2025 - Linux-kselftest-mirror

[PATCH net 0/5] selftests: mptcp: avoid spurious errors on TCP disconnect

by Matthieu Baerts (NGI0)

This series should fix the recent instabilities seen by MPTCP and NIPA CIs where the 'mptcp_connect.sh' tests fail regularly when running the 'disconnect' subtests with "plain" TCP sockets, e.g. # INFO: disconnect # 63 ns1 MPTCP -> ns1 (10.0.1.1:20001 ) MPTCP (duration 996ms) [ OK ] # 64 ns1 MPTCP -> ns1 (10.0.1.1:20002 ) TCP (duration 851ms) [ OK ] # 65 ns1 TCP -> ns1 (10.0.1.1:20003 ) MPTCP Unexpected revents: POLLERR/POLLNVAL(19) # (duration 896ms) [FAIL] file received by server does not match (in, out): # -rw-r--r-- 1 root root 11112852 Aug 19 09:16 /tmp/tmp.hlJe5DoMoq.disconnect # Trailing bytes are: # /{ga 6@=#.8:-rw------- 1 root root 10085368 Aug 19 09:16 /tmp/tmp.blClunilxx # Trailing bytes are: # /{ga 6@=#.8:66 ns1 MPTCP -> ns1 (dead:beef:1::1:20004) MPTCP (duration 987ms) [ OK ] # 67 ns1 MPTCP -> ns1 (dead:beef:1::1:20005) TCP (duration 911ms) [ OK ] # 68 ns1 TCP -> ns1 (dead:beef:1::1:20006) MPTCP (duration 980ms) [ OK ] # [FAIL] Tests of the full disconnection have failed These issues started to be visible after some behavioural changes in TCP, where too quick re-connections after a shutdown() can now be more easily rejected. Patch 3 modifies the selftests to wait, but this resolution revealed an issue in MPTCP which is fixed by patch 1 (a fix for v5.9 kernel). Patches 2 and 4 improve some errors reported by the selftests, and patch 5 helps with the debugging of such issues. Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> --- Note: The last two patches are not strictly fixes, but they are useful in case similar issues happen again. That's why they have been added here in this series for -net. If that's an issue, please drop them, and I can re-send them later on. --- Matthieu Baerts (NGI0) (5): mptcp: propagate shutdown to subflows when possible selftests: mptcp: connect: catch IO errors on listen side selftests: mptcp: avoid spurious errors on TCP disconnect selftests: mptcp: print trailing bytes with od selftests: mptcp: connect: print pcap prefix net/mptcp/protocol.c | 16 ++++++++++++++++ tools/testing/selftests/net/mptcp/mptcp_connect.c | 11 ++++++----- tools/testing/selftests/net/mptcp/mptcp_connect.sh | 6 +++++- tools/testing/selftests/net/mptcp/mptcp_lib.sh | 2 +- 4 files changed, 28 insertions(+), 7 deletions(-) --- base-commit: 2690cb089502b80b905f2abdafd1bf2d54e1abef change-id: 20250912-net-mptcp-fix-sft-connect-f095ad7a6e36 Best regards, -- Matthieu Baerts (NGI0) <matttbe(a)kernel.org>

6 days, 3 hours

2
6
0 0

[PATCH net 0/5] mptcp: pm: nl: announce deny-join-id0 flag

by Matthieu Baerts (NGI0)

During the connection establishment, a peer can tell the other one that it cannot establish new subflows to the initial IP address and port by setting the 'C' flag [1]. Doing so makes sense when the sender is behind a strict NAT, operating behind a legacy Layer 4 load balancer, or using anycast IP address for example. When this 'C' flag is set, the path-managers must then not try to establish new subflows to the other peer's initial IP address and port. The in-kernel PM has access to this info, but the userspace PM didn't, not letting the userspace daemon able to respect the RFC8684. Here are a few fixes related to this 'C' flag (aka 'deny-join-id0'): - Patch 1: add remote_deny_join_id0 info on passive connections. A fix for v5.14. - Patch 2: let the userspace PM daemon know about the deny_join_id0 attribute, so when set, it can avoid creating new subflows to the initial IP address and port. A fix for v5.19. - Patch 3: a validation for the previous commit. - Patch 4: record the deny_join_id0 info when TFO is used. A fix for v6.2. - Patch 5: not related to deny-join-id0, but it fixes errors messages in the sockopt selftests, not to create confusions. A fix for v6.5. Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> --- Geliang Tang (1): selftests: mptcp: sockopt: fix error messages Matthieu Baerts (NGI0) (4): mptcp: set remote_deny_join_id0 on SYN recv mptcp: pm: nl: announce deny-join-id0 flag selftests: mptcp: userspace pm: validate deny-join-id0 flag mptcp: tfo: record 'deny join id0' info Documentation/netlink/specs/mptcp_pm.yaml | 4 ++-- include/uapi/linux/mptcp.h | 2 ++ include/uapi/linux/mptcp_pm.h | 4 ++-- net/mptcp/options.c | 6 +++--- net/mptcp/pm_netlink.c | 7 +++++++ net/mptcp/subflow.c | 4 ++++ tools/testing/selftests/net/mptcp/mptcp_sockopt.c | 16 ++++++++++------ tools/testing/selftests/net/mptcp/pm_nl_ctl.c | 7 +++++++ tools/testing/selftests/net/mptcp/userspace_pm.sh | 14 +++++++++++--- 9 files changed, 48 insertions(+), 16 deletions(-) --- base-commit: 2690cb089502b80b905f2abdafd1bf2d54e1abef change-id: 20250912-net-mptcp-pm-uspace-deny_join_id0-b6111e4e7e69 Best regards, -- Matthieu Baerts (NGI0) <matttbe(a)kernel.org>

6 days, 3 hours

2
6
0 0

[PATCH v5 0/2] KVM: guest_memfd: use write for population

by Kalyazin, Nikita

[ based on kvm/next ] Implement guest_memfd allocation and population via the write syscall. This is useful in non-CoCo use cases where the host can access guest memory. Even though the same can also be achieved via userspace mapping and memcpying from userspace, write provides a more performant option because it does not need to set page tables and it does not cause a page fault for every page like memcpy would. Note that memcpy cannot be accelerated via MADV_POPULATE_WRITE as it is not supported by guest_memfd and relies on GUP. Populating 512MiB of guest_memfd on a x86 machine: - via memcpy: 436 ms - via write: 202 ms (-54%) v5: - Replace the call to the unexported filemap_remove_folio with zeroing the bytes that could not be copied - Fix checkpatch findings v4: - https://lore.kernel.org/kvm/20250828153049.3922-1-kalyazin@amazon.com - Switch from implementing the write callback to write_iter - Remove conditional compilation v3: - https://lore.kernel.org/kvm/20250303130838.28812-1-kalyazin@amazon.com - David/Mike D: Only compile support for the write syscall if CONFIG_KVM_GMEM_SHARED_MEM (now gone) is enabled. v2: - https://lore.kernel.org/kvm/20241129123929.64790-1-kalyazin@amazon.com - Switch from an ioctl to the write syscall to implement population v1: - https://lore.kernel.org/kvm/20241024095429.54052-1-kalyazin@amazon.com Nikita Kalyazin (2): KVM: guest_memfd: add generic population via write KVM: selftests: update guest_memfd write tests .../testing/selftests/kvm/guest_memfd_test.c | 86 +++++++++++++++++-- virt/kvm/guest_memfd.c | 62 ++++++++++++- 2 files changed, 141 insertions(+), 7 deletions(-) base-commit: a6ad54137af92535cfe32e19e5f3bc1bb7dbd383 -- 2.50.1

6 days, 3 hours

5
16
0 0

[PATCHv2 net 1/2] bonding: set random address only when slaves already exist

by Hangbin Liu

After commit 5c3bf6cba791 ("bonding: assign random address if device address is same as bond"), bonding will erroneously randomize the MAC address of the first interface added to the bond if fail_over_mac = follow. Correct this by additionally testing for the bond being empty before randomizing the MAC. Fixes: 5c3bf6cba791 ("bonding: assign random address if device address is same as bond") Reported-by: Qiuling Ren <qren(a)redhat.com> Signed-off-by: Hangbin Liu <liuhangbin(a)gmail.com> --- drivers/net/bonding/bond_main.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 257333c88710..8832bc9f107b 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2132,6 +2132,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev, memcpy(ss.__data, bond_dev->dev_addr, bond_dev->addr_len); } else if (bond->params.fail_over_mac == BOND_FOM_FOLLOW && BOND_MODE(bond) == BOND_MODE_ACTIVEBACKUP && + bond_has_slaves(bond) && memcmp(slave_dev->dev_addr, bond_dev->dev_addr, bond_dev->addr_len) == 0) { /* Set slave to random address to avoid duplicate mac * address in later fail over. -- 2.50.1

6 days, 3 hours

2
2
0 0

[PATCH] KVM: selftests: Fix typo in hyperv cpuid test message

by Alok Tiwari

Fix a typo in hyperv_cpuid.c test assertion log: replace "our of supported range" -> "out of supported range". Signed-off-by: Alok Tiwari <alok.a.tiwari(a)oracle.com> --- tools/testing/selftests/kvm/x86/hyperv_cpuid.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/x86/hyperv_cpuid.c b/tools/testing/selftests/kvm/x86/hyperv_cpuid.c index c863a689aa985..3c21af811d8f1 100644 --- a/tools/testing/selftests/kvm/x86/hyperv_cpuid.c +++ b/tools/testing/selftests/kvm/x86/hyperv_cpuid.c @@ -45,7 +45,7 @@ static void test_hv_cpuid(struct kvm_vcpu *vcpu, bool evmcs_expected) TEST_ASSERT((entry->function >= 0x40000000) && (entry->function <= 0x40000082), - "function %x is our of supported range", + "function %x is out of supported range", entry->function); TEST_ASSERT(entry->index == 0, -- 2.50.1

6 days, 4 hours

2
1
0 0

[PATCH v18 net-next 00/14] AccECN protocol patch series

by chia-yu.chang＠nokia-bell-labs.com

From: Chia-Yu Chang <chia-yu.chang(a)nokia-bell-labs.com> Hello, Please find the v18 AccECN protocol patch series, which covers the core functionality of Accurate ECN, AccECN negotiation, AccECN TCP options, and AccECN failure handling. The Accurate ECN draft can be found in https://datatracker.ietf.org/doc/html/draft-ietf-tcpm-accurate-ecn-28, and it will be RFC9768. This patch series is part of the full AccECN patch series, which is available at https://github.com/L4STeam/linux-net-next/commits/upstream_l4steam/ Best Regards, Chia-Yu --- v18 (11-Sep-2025) - Reorder tcpi_accecn_fail_mode and tcpi_accecn_opt_seen to avoid adding fields in the middle of tcp_info (Eric Dumazet <edumazet(a)google.com>) v17 (8-Sep-2025) - Change tcp_ecn_mode_max from 5 to 2 to disable AccECN enablement before the whole AccECN feature been accpeted v16 (6-Sep-2025) - Use TCP_ECN_IN_ACCECN_OUT_ACCECN, TCP_ECN_IN_ECN_OUT_ECN, and TCP_ECN_IN_ACCECN_OUT_ECN in comments of tcp_ecn_send_syn() (Eric Dumazet <edumazet(a)google.com>) - Add tcpi_accecn_fail_mode and tcpi_accecn_opt_seen to make tcp_info be multiple of 64 bits in patch #12 v15 (14-Aug-205) - Update pahole results in commit messages - Accurate ECN will become RFC9768 v14 (22-Jul-2025) - Add missing const for struct tcp_sock of tcp_accecn_option_beacon_check() of #11 (Simon Horman <horms(a)kernel.org>) v13 (18-Jul-2025) - Implement tcp_accecn_extract_syn_ect() and tcp_accecn_reflector_flags() with static array lookup of patch #6 (Paolo Abeni <pabeni(a)redhat.com>) - Fix typos in comments of #6 and remove patch #7 of v12 about simulatenous connect (Paolo Abeni <pabeni(a)redhat.com>) - Move TCP_ACCECN_E1B_INIT_OFFSET, TCP_ACCECN_E0B_INIT_OFFSET, and TCP_ACCECN_CEB_INIT_OFFSET from patch #7 to #11 (Paolo Abeni <pabeni(a)redhat.com>) - Use static array lookup in tcp_accecn_optfield_to_ecnfield() of patch #11 (Paolo Abeni <pabeni(a)redhat.com>) - Return false when WARN_ON_ONCE() is true in tcp_accecn_process_option() of patch #11 (Paolo Abeni <pabeni(a)redhat.com>) - Make synack_ecn_bytes as static const array and use const u32 pointer in tcp_options_write() of #11 (Paolo Abeni <pabeni(a)redhat.com>) - Use ALIGN() and ALIGN_DOWN() in tcp_options_fit_accecn() to pad TCP AccECN option to dword of #11 (Paolo Abeni <pabeni(a)redhat.com>) - Return TCP_ACCECN_OPT_FAIL_SEEN if WARN_ON_ONCE() is true in tcp_accecn_option_init() of #12 (Paolo Abeni <pabeni(a)redhat.com>) v12 (04-Jul-2025) - Fix compilation issues with some intermediate patches in v11 - Add more comments for AccECN helpers of tcp_ecn.h v11 (03-Jul-2025) - Fix compilation issues with some intermediate patches in v10 v10 (02-Jul-2025) - Add new patch of separated header file include/net/tcp_ecn.h to include ECN and AccECN functions (Eric Dumazet <edumazet(a)google.com>) - Add comments on the AccECN helper functions in tcp_ecn.h (Eric Dumazet <edumazet(a)google.com>) - Add documentation of tcp_ecn, tcp_ecn_option, tcp_ecn_beacon in ip-sysctl.rst to the corresponding patch (Eric Dumazet <edumazet(a)google.com>) - Split wait third ACK functionality into a separated patch from AccECN negotiation patch (Eric Dumazet <edumazet(a)google.com>) - Add READ_ONCE() over every reads of sysctl for all patches in the series (Eric Dumazet <edumazet(a)google.com>) - Merge heuristics of AccECN option ceb/cep and ACE field multi-wrap into a single patch - Add a table of SACK block reduction and required AccECN field in patch #15 commit message (Eric Dumazet <edumazet(a)google.com>) v9 (21-Jun-2025) - Use tcp_data_ecn_check() to set TCP_ECN_SEE flag only for RFC3168 ECN (Paolo Abeni <pabeni(a)redhat.com>) - Add comments about setting TCP_ECN_SEEN flag for RFC3168 and Accruate ECN (Paolo Abeni <pabeni(a)redhat.com>) - Restruct the code in the for loop of tcp_accecn_process_option() (Paolo Abeni <pabeni(a)redhat.com>) - Remove ecn_bytes and add use_synack_ecn_bytes flag to identify whether syn_ack_bytes or received_ecn_bytes is used (Paolo Abeni <pabeni(a)redhat.com>) - Replace leftover_bytes and leftover_size with leftover_highbyte and leftover_lowbyte and add comments in tcp_options_write() (Paolo Abeni <pabeni(a)redhat.com>) - Add comments and commit message about the 1st retx SYN still attempt AccECN negotiation (Paolo Abeni <pabeni(a)redhat.com>) v8 (10-Jun-2025) - Add new helper function tcp_ecn_received_counters_payload() in #6 (Paolo Abeni <pabeni(a)redhat.com>) - Set opts->num_sack_blocks=0 to avoid potential undefined value in #8 (Paolo Abeni <pabeni(a)redhat.com>) - Reset leftover_size to 2 once leftover_bytes is used in #9 (Paolo Abeni <pabeni(a)redhat.com>) - Add new helper function tcp_accecn_opt_demand_min() in #10 (Paolo Abeni <pabeni(a)redhat.com>) - Add new helper function tcp_accecn_saw_opt_fail_recv() in #11 (Paolo Abeni <pabeni(a)redhat.com>) - Update tcp_options_fit_accecn() to avoid using recursion in #14 (Paolo Abeni <pabeni(a)redhat.com>) v7 (14-May-2025) - Modify group sizes of tcp_sock_write_txrx and tcp_sock_write_rx in #3 based on pahole results (Paolo Abeni <pabeni(a)redhat.com>) - Fix the issue in #4 and #5 where the RFC3168 ECN behavior in tcp_ecn_send() is changed (Paolo Abeni <pabeni(a)redhat.com>) - Modify group size of tcp_sock_write_txrx in #4 and #6 based on pahole results (Paolo Abeni <pabeni(a)redhat.com>) - Update commit message for #9 to explain the increase in tcp_sock_write_rx group size - Modify group size of tcp_sock_write_tx in #10 based on pahole results v6 (09-May-2025) - Add #3 to utilize exisintg holes of tcp_sock_write_txrx group for later patches (#4, #9, #10) with new u8 members (Paolo Abeni <pabeni(a)redhat.com>) - Add pahole outcomes before and after commit in #4, #5, #6, #9, #10, #15 (Paolo Abeni <pabeni(a)redhat.com>) - Define new helper function tcp_send_ack_reflect_ect() for sending ACK with reflected ECT in #5 (Paolo Abeni <pabeni(a)redhat.com>) - Add comments for function tcp_ecn_rcv_synack() in #5 (Paolo Abeni <pabeni(a)redhat.com>) - Add enum/define to be used by sysctl_tcp_ecn in #5, sysctl_tcp_ecn_option in #9, and sysctl_tcp_ecn_option_beacon in #10 (Paolo Abeni <pabeni(a)redhat.com>) - Move accecn_fail_mode and saw_accecn_opt in #5 and #11 to use exisintg holes of tcp_sock (Paolo Abeni <pabeni(a)redhat.com>) - Change data type of new members of tcp_request_sock and move them to the end of struct in #5 and #11 (Paolo Abeni <pabeni(a)redhat.com>) - Move new members of tcp_info to the end of struct in #6 (Paolo Abeni <pabeni(a)redhat.com>) - Merge previous #7 into #9 (Paolo Abeni <pabeni(a)redhat.com>) - Mask ecnfield with INET_ECN_MASK to remove WARN_ONCE in #9 (Paolo Abeni <pabeni(a)redhat.com>) - Reduce the indentation levels for reabability in #9 and #10 (Paolo Abeni <pabeni(a)redhat.com>) - Move delivered_ecn_bytes to the RX group in #9, accecn_opt_tstamp to the TX group in #10, pkts_acked_ewma to the RX group in #15 (Paolo Abeni <pabeni(a)redhat.com>) - Add changes in Documentation/networking/net_cachelines/tcp_sock.rst for new tcp_sock members in #3, #5, #6, #9, #10, #15 v5 (22-Apr-2025) - Further fix for 32-bit ARM alignment in tcp.c (Simon Horman <horms(a)kernel.org>) v4 (18-Apr-2025) - Fix 32-bit ARM assertion for alignment requirement (Simon Horman <horms(a)kernel.org>) v3 (14-Apr-2025) - Fix patch apply issue in v2 (Jakub Kicinski <kuba(a)kernel.org>) v2 (18-Mar-2025) - Add one missing patch from the previous AccECN protocol preparation patch series to this patch series. --- Chia-Yu Chang (5): tcp: reorganize tcp_sock_write_txrx group for variables later tcp: ecn functions in separated include file tcp: accecn: AccECN option send control tcp: accecn: AccECN option failure handling tcp: accecn: try to fit AccECN option with SACK Ilpo Järvinen (9): tcp: reorganize SYN ECN code tcp: fast path functions later tcp: AccECN core tcp: accecn: AccECN negotiation tcp: accecn: add AccECN rx byte counters tcp: accecn: AccECN needs to know delivered bytes tcp: sack option handling improvements tcp: accecn: AccECN option tcp: accecn: AccECN option ceb/cep and ACE field multi-wrap heuristics Documentation/networking/ip-sysctl.rst | 55 +- .../networking/net_cachelines/tcp_sock.rst | 12 + include/linux/tcp.h | 32 +- include/net/netns/ipv4.h | 2 + include/net/tcp.h | 87 ++- include/net/tcp_ecn.h | 642 ++++++++++++++++++ include/uapi/linux/tcp.h | 9 + net/ipv4/syncookies.c | 4 + net/ipv4/sysctl_net_ipv4.c | 19 + net/ipv4/tcp.c | 30 +- net/ipv4/tcp_input.c | 353 ++++++++-- net/ipv4/tcp_ipv4.c | 8 +- net/ipv4/tcp_minisocks.c | 40 +- net/ipv4/tcp_output.c | 294 ++++++-- net/ipv6/syncookies.c | 2 + net/ipv6/tcp_ipv6.c | 1 + 16 files changed, 1406 insertions(+), 184 deletions(-) create mode 100644 include/net/tcp_ecn.h -- 2.34.1

6 days, 5 hours

3
16
0 0

[PATCH 0/4] PCI: Add support and tests for FIXUP quirks in modules

by Brian Norris

This series primarily adds support for DECLARE_PCI_FIXUP_*() in modules. There are a few drivers that already use this, and so they are presumably broken when built as modules. While at it, I wrote some unit tests that emulate a fake PCI device, and let the PCI framework match/not-match its vendor/device IDs. This test can be built into the kernel or built as a module. I also include some infrastructure changes (patch 3 and 4), so that ARCH=um (the default for kunit.py), ARCH=arm, and ARCH=arm64 will run these tests by default. These patches have different maintainers and are independent, so they can probably be picked up separately. I included them because otherwise the tests in patch 2 aren't so easy to run. Brian Norris (4): PCI: Support FIXUP quirks in modules PCI: Add KUnit tests for FIXUP quirks um: Select PCI_DOMAINS_GENERIC kunit: qemu_configs: Add PCI to arm, arm64 arch/um/Kconfig | 1 + drivers/pci/Kconfig | 11 ++ drivers/pci/Makefile | 1 + drivers/pci/fixup-test.c | 197 ++++++++++++++++++++++ drivers/pci/quirks.c | 62 +++++++ include/linux/module.h | 18 ++ kernel/module/main.c | 26 +++ tools/testing/kunit/qemu_configs/arm.py | 1 + tools/testing/kunit/qemu_configs/arm64.py | 1 + 9 files changed, 318 insertions(+) create mode 100644 drivers/pci/fixup-test.c -- 2.51.0.384.g4c02a37b29-goog

6 days, 8 hours

4
10
0 0

next-20250909: selftests/arm64/gcs/basic-gcs.c:390:30: error: use of undeclared identifier 'HWCAP_GCS'

by Naresh Kamboju

The following build warnings / errors noticed on arm64 defconfig with clang-20 and gcc-13 toolchains on the Linux next-20250909 till next-20250911 tag while building selftests/arm64. Regression Analysis: - New regression? Yes - Reproducibility? yes First seen on next-20250909 Good: next-20250908 Bad: next-20250909 till next-20250911 Test regression: next-20250909: selftests/arm64/gcs/basic-gcs.c:390:30: error: use of undeclared identifier 'HWCAP_GCS' Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> ## Build log selftests/arm64/gcs/basic-gcs.c:390:30: error: use of undeclared identifier 'HWCAP_GCS' 390 | if (!(getauxval(AT_HWCAP) & HWCAP_GCS)) | ^ 1 error generated. The suspected commit pointing to, kselftest/arm64/gcs: Use nolibc's getauxval() a985fe638344492727528e52416211dda1c391d5 ## Source * Kernel version: 6.17.0-rc5 * Git tree: https://kernel.googlesource.com/pub/scm/linux/kernel/git/next/linux-next.git * Git describe: 6.17.0-rc5-next-20250911 * Git commit: 8f21d9da46702c4d6951ba60ca8a05f42870fe8f * Architectures: arm64 * Toolchains: gcc-13 and clang-20 * Kconfigs: defconfig ## Build * Build log: https://qa-reports.linaro.org/api/testruns/29827060/log_file/ * Build details: https://regressions.linaro.org/lkft/linux-next-master/next-20250909/log-par… * Build plan: https://tuxapi.tuxsuite.com/v1/groups/linaro/projects/lkft/builds/32RzudgbC… * Build link: https://storage.tuxsuite.com/public/linaro/lkft/builds/32RzudgbCUiqGUoFtquJ… * Kernel config: https://storage.tuxsuite.com/public/linaro/lkft/builds/32RzudgbCUiqGUoFtquJ… ## Steps to reproduce $ tuxmake --runtime podman --target-arch arm64 \ --toolchain clang-nightly \ --kconfig https://storage.tuxsuite.com/public/linaro/lkft/builds/32RzudgbCUiqGUoFtquJ… \ LLVM=1 LLVM_IAS=1 debugkernel dtbs dtbs-legacy headers kernel kselftest modules -- Linaro LKFT

6 days, 9 hours

3
9
0 0

[PATCH v3 bpf-next] selftests/bpf: Fix arena_spin_lock selftest failure

by Saket Kumar Bhaskar

For systems having CONFIG_NR_CPUS set to > 1024 in kernel config the selftest fails as arena_spin_lock_irqsave() returns EOPNOTSUPP. (eg - incase of powerpc default value for CONFIG_NR_CPUS is 8192) The selftest is skipped incase bpf program returns EOPNOTSUPP, with a descriptive message logged. Tested-by: Venkat Rao Bagalkote <venkat88(a)linux.ibm.com> Signed-off-by: Saket Kumar Bhaskar <skb99(a)linux.ibm.com> --- Changes since v2: * Separated arena_spin_lock selftest fix patch from the arena patchset as it has to go via bpf-next tree. * For EOPNOTSUPP set test_skip to 3, to differentiate it from scenarios when run conditions are not met as suggested by Hari. * Tweaked message displayed on SKIP to remove display of online cpus. v2:https://lore.kernel.org/all/20250829165135.1273071-1-skb99@linux.ibm.com/ Changes since v1: Addressed comments from Alexei: * Removed skel->rodata->nr_cpus = get_nprocs() and its usage to get currently online cpus(as it needs to be updated from userspace). v1:https://lore.kernel.org/all/20250805062747.3479221-1-skb99@linux.ibm.com/ --- .../selftests/bpf/prog_tests/arena_spin_lock.c | 13 +++++++++++++ tools/testing/selftests/bpf/progs/arena_spin_lock.c | 5 ++++- 2 files changed, 17 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/bpf/prog_tests/arena_spin_lock.c b/tools/testing/selftests/bpf/prog_tests/arena_spin_lock.c index 0223fce4db2b..693fd86fbde6 100644 --- a/tools/testing/selftests/bpf/prog_tests/arena_spin_lock.c +++ b/tools/testing/selftests/bpf/prog_tests/arena_spin_lock.c @@ -40,8 +40,13 @@ static void *spin_lock_thread(void *arg) err = bpf_prog_test_run_opts(prog_fd, &topts); ASSERT_OK(err, "test_run err"); + + if (topts.retval == -EOPNOTSUPP) + goto end; + ASSERT_EQ((int)topts.retval, 0, "test_run retval"); +end: pthread_exit(arg); } @@ -63,6 +68,7 @@ static void test_arena_spin_lock_size(int size) skel = arena_spin_lock__open_and_load(); if (!ASSERT_OK_PTR(skel, "arena_spin_lock__open_and_load")) return; + if (skel->data->test_skip == 2) { test__skip(); goto end; @@ -86,6 +92,13 @@ static void test_arena_spin_lock_size(int size) goto end_barrier; } + if (skel->data->test_skip == 3) { + printf("%s:SKIP: CONFIG_NR_CPUS exceed the maximum supported by arena spinlock\n", + __func__); + test__skip(); + goto end_barrier; + } + ASSERT_EQ(skel->bss->counter, repeat * nthreads, "check counter value"); end_barrier: diff --git a/tools/testing/selftests/bpf/progs/arena_spin_lock.c b/tools/testing/selftests/bpf/progs/arena_spin_lock.c index c4500c37f85e..086b57a426cf 100644 --- a/tools/testing/selftests/bpf/progs/arena_spin_lock.c +++ b/tools/testing/selftests/bpf/progs/arena_spin_lock.c @@ -37,8 +37,11 @@ int prog(void *ctx) #if defined(ENABLE_ATOMICS_TESTS) && defined(__BPF_FEATURE_ADDR_SPACE_CAST) unsigned long flags; - if ((ret = arena_spin_lock_irqsave(&lock, flags))) + if ((ret = arena_spin_lock_irqsave(&lock, flags))) { + if (ret == -EOPNOTSUPP) + test_skip = 3; return ret; + } if (counter != limit) counter++; bpf_repeat(cs_count); -- 2.43.5

6 days, 10 hours

2
1
0 0

[PATCH RESEND v2] kunit: Enable PCI on UML without triggering WARN()

by Thomas Weißschuh

Various KUnit tests require PCI infrastructure to work. All normal platforms enable PCI by default, but UML does not. Enabling PCI from .kunitconfig files is problematic as it would not be portable. So in commit 6fc3a8636a7b ("kunit: tool: Enable virtio/PCI by default on UML") PCI was enabled by way of CONFIG_UML_PCI_OVER_VIRTIO=y. However CONFIG_UML_PCI_OVER_VIRTIO requires additional configuration of CONFIG_UML_PCI_OVER_VIRTIO_DEVICE_ID or will otherwise trigger a WARN() in virtio_pcidev_init(). However there is no one correct value for UML_PCI_OVER_VIRTIO_DEVICE_ID which could be used by default. This warning is confusing when debugging test failures. On the other hand, the functionality of CONFIG_UML_PCI_OVER_VIRTIO is not used at all, given that it is completely non-functional as indicated by the WARN() in question. Instead it is only used as a way to enable CONFIG_UML_PCI which itself is not directly configurable. Instead of going through CONFIG_UML_PCI_OVER_VIRTIO, introduce a custom configuration option which enables CONFIG_UML_PCI without triggering warnings or building dead code. Signed-off-by: Thomas Weißschuh <thomas.weissschuh(a)linutronix.de> Reviewed-by: Johannes Berg <johannes(a)sipsolutions.net> --- Changes in v2: - Rebase onto v6.17-rc1 - Pick up review from Johannes - Link to v1: https://lore.kernel.org/r/20250627-kunit-uml-pci-v1-1-a622fa445e58@linutron… --- lib/kunit/Kconfig | 7 +++++++ tools/testing/kunit/configs/arch_uml.config | 5 ++--- 2 files changed, 9 insertions(+), 3 deletions(-) diff --git a/lib/kunit/Kconfig b/lib/kunit/Kconfig index c10ede4b1d2201d5f8cddeb71cc5096e21be9b6a..1823539e96da30e165fa8d395ccbd3f6754c836e 100644 --- a/lib/kunit/Kconfig +++ b/lib/kunit/Kconfig @@ -106,4 +106,11 @@ config KUNIT_DEFAULT_TIMEOUT If unsure, the default timeout of 300 seconds is suitable for most cases. +config KUNIT_UML_PCI + bool "KUnit UML PCI Support" + depends on UML + select UML_PCI + help + Enables the PCI subsystem on UML for use by KUnit tests. + endif # KUNIT diff --git a/tools/testing/kunit/configs/arch_uml.config b/tools/testing/kunit/configs/arch_uml.config index 54ad8972681a2cc724e6122b19407188910b9025..28edf816aa70e6f408d9486efff8898df79ee090 100644 --- a/tools/testing/kunit/configs/arch_uml.config +++ b/tools/testing/kunit/configs/arch_uml.config @@ -1,8 +1,7 @@ # Config options which are added to UML builds by default -# Enable virtio/pci, as a lot of tests require it. -CONFIG_VIRTIO_UML=y -CONFIG_UML_PCI_OVER_VIRTIO=y +# Enable pci, as a lot of tests require it. +CONFIG_KUNIT_UML_PCI=y # Enable FORTIFY_SOURCE for wider checking. CONFIG_FORTIFY_SOURCE=y --- base-commit: 8f5ae30d69d7543eee0d70083daf4de8fe15d585 change-id: 20250626-kunit-uml-pci-a2b687553746 Best regards, -- Thomas Weißschuh <thomas.weissschuh(a)linutronix.de>

6 days, 12 hours

4
4
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror September 2025