September 2025 - Linux-kselftest-mirror

by Jarkko Sakkinen

Hi, The pre-existing kselftest for TPM2 is derived works of my earlier Python based rudimentary TPM2 stack called 'tpm2-scripts'. In order to get more coverage and more mainintainable and extensible test suite I'd like to eventually rewrite the tests with bash and tpm2sh, which is a TPM2 cli written with Rust and based on my new TPM2 stack [1] [2]. Given linux-rust work, would it be acceptable to require cargo to install a runner for kselftest? I'm finishing off now 0.11 version of the tool, which will take some time (versions before that are honestly quite bad, don't try them) but after that this would be something I'd like to put together. NOTE: while tpm2-protocol itself is Apache/MIT, tpm2sh is GPL3 licensed command-line program (for what it is worth). [1] https://github.com/puavo-org/tpm2sh [2] https://git.kernel.org/pub/scm/linux/kernel/git/jarkko/tpm2-protocol.git/ab… BR, Jarkko

3 days, 5 hours

2
6
0 0

[PATCH v2 net-next 00/14] AccECN protocol case handling series

by chia-yu.chang＠nokia-bell-labs.com

From: Chia-Yu Chang <chia-yu.chang(a)nokia-bell-labs.com> Hello, Plesae find the v2 AccECN case handling patch series, which covers several excpetional case handling of Accurate ECN spec (RFC9768), adds new identifiers to be used by CC modules, adds ecn_delta into rate_sample, and keeps the ACE counter for computation, etc. This patch series is part of the full AccECN patch series, which is available at https://github.com/L4STeam/linux-net-next/commits/upstream_l4steam/ Best regards, Chia-Yu --- Chia-Yu Chang (11): tcp: L4S ECT(1) identifier and NEEDS_ACCECN for CC modules tcp: disable RFC3168 fallback identifier for CC modules tcp: accecn: handle unexpected AccECN negotiation feedback tcp: accecn: retransmit downgraded SYN in AccECN negotiation tcp: move increment of num_retrans tcp: accecn: retransmit SYN/ACK without AccECN option or non-AccECN SYN/ACK tcp: accecn: unset ECT if receive or send ACE=0 in AccECN negotiaion tcp: accecn: fallback outgoing half link to non-AccECN tcp: accecn: verify ACE counter in 1st ACK after AccECN negotiation tcp: accecn: stop sending AccECN opt when loss ACK w/ option tcp: accecn: enable AccECN Ilpo Järvinen (3): tcp: try to avoid safer when ACKs are thinned gro: flushing when CWR is set negatively affects AccECN tcp: accecn: Add ece_delta to rate_sample .../networking/net_cachelines/tcp_sock.rst | 1 + include/linux/tcp.h | 4 +- include/net/inet_ecn.h | 20 +++- include/net/tcp.h | 30 +++++- include/net/tcp_ecn.h | 85 ++++++++++++----- net/ipv4/sysctl_net_ipv4.c | 2 +- net/ipv4/tcp.c | 2 + net/ipv4/tcp_cong.c | 9 +- net/ipv4/tcp_input.c | 91 +++++++++++++------ net/ipv4/tcp_minisocks.c | 40 +++++--- net/ipv4/tcp_offload.c | 3 +- net/ipv4/tcp_output.c | 38 +++++--- 12 files changed, 239 insertions(+), 86 deletions(-) -- 2.34.1

3 days, 6 hours

1
14
0 0

[PATCH RFC 0/4] landlock: add LANDLOCK_SCOPE_MEMFD_EXEC execution

by Abhinav Saxena

This patch series introduces LANDLOCK_SCOPE_MEMFD_EXEC, a new Landlock scoping mechanism that restricts execution of anonymous memory file descriptors (memfd) created via memfd_create(2). This addresses security gaps where processes can bypass W^X policies and execute arbitrary code through anonymous memory objects. Fixes: https://github.com/landlock-lsm/linux/issues/37 SECURITY PROBLEM ================ Current Landlock filesystem restrictions do not cover memfd objects, allowing processes to: 1. Read-to-execute bypass: Create writable memfd, inject code, then execute via mmap(PROT_EXEC) or direct execve() 2. Anonymous execution: Execute code without touching the filesystem via execve("/proc/self/fd/N") where N is a memfd descriptor 3. Cross-domain access violations: Pass memfd between processes to bypass domain restrictions These scenarios can occur in sandboxed environments where filesystem access is restricted but memfd creation remains possible. IMPLEMENTATION ============== The implementation adds hierarchical execution control through domain scoping: Core Components: - is_memfd_file(): Reliable memfd detection via "memfd:" dentry prefix - domain_is_scoped(): Cross-domain hierarchy checking (moved to domain.c) - LSM hooks: mmap_file, file_mprotect, bprm_creds_for_exec - Creation-time restrictions: hook_file_alloc_security Security Matrix: Execution decisions follow domain hierarchy rules preventing both same-domain bypass attempts and cross-domain access violations while preserving legitimate hierarchical access patterns. Domain Hierarchy with LANDLOCK_SCOPE_MEMFD_EXEC: =============================================== Root (no domain) - No restrictions | +-- Domain A [SCOPE_MEMFD_EXEC] Layer 1 | +-- memfd_A (tagged with Domain A as creator) | | | +-- Domain A1 (child) [NO SCOPE] Layer 2 | | +-- Inherits Layer 1 restrictions from parent | | +-- memfd_A1 (can create, inherits restrictions) | | +-- Domain A1a [SCOPE_MEMFD_EXEC] Layer 3 | | +-- memfd_A1a (tagged with Domain A1a) | | | +-- Domain A2 (child) [SCOPE_MEMFD_EXEC] Layer 2 | +-- memfd_A2 (tagged with Domain A2 as creator) | +-- CANNOT access memfd_A1 (different subtree) | +-- Domain B [SCOPE_MEMFD_EXEC] Layer 1 +-- memfd_B (tagged with Domain B as creator) +-- CANNOT access ANY memfd from Domain A subtree Execution Decision Matrix: ======================== Executor-> | A | A1 | A1a | A2 | B | Root Creator | | | | | | ------------|-----|----|-----|----|----|----- Domain A | X | X | X | X | X | Y Domain A1 | Y | X | X | X | X | Y Domain A1a | Y | Y | X | X | X | Y Domain A2 | Y | X | X | X | X | Y Domain B | X | X | X | X | X | Y Root | Y | Y | Y | Y | Y | Y Legend: Y = Execution allowed, X = Execution denied Scenarios Covered: - Direct mmap(PROT_EXEC) on memfd files - Two-stage mmap(PROT_READ) + mprotect(PROT_EXEC) bypass attempts - execve("/proc/self/fd/N") anonymous execution - execveat() and fexecve() file descriptor execution - Cross-process memfd inheritance and IPC passing TESTING ======= All patches have been validated with: - scripts/checkpatch.pl --strict (clean) - Selftests covering same-domain restrictions, cross-domain hierarchy enforcement, and regular file isolation - KUnit tests for memfd detection edge cases DISCLAIMER ========== My understanding of Landlock scoping semantics may be limited, but this implementation reflects my current understanding based on available documentation and code analysis. I welcome feedback and corrections regarding the scoping logic and domain hierarchy enforcement. Signed-off-by: Abhinav Saxena <xandfury(a)gmail.com> --- Abhinav Saxena (4): landlock: add LANDLOCK_SCOPE_MEMFD_EXEC scope landlock: implement memfd detection landlock: add memfd exec LSM hooks and scoping selftests/landlock: add memfd execution tests include/uapi/linux/landlock.h | 5 + security/landlock/.kunitconfig | 1 + security/landlock/audit.c | 4 + security/landlock/audit.h | 1 + security/landlock/cred.c | 14 - security/landlock/domain.c | 67 ++++ security/landlock/domain.h | 4 + security/landlock/fs.c | 405 ++++++++++++++++++++- security/landlock/limits.h | 2 +- security/landlock/task.c | 67 ---- .../selftests/landlock/scoped_memfd_exec_test.c | 325 +++++++++++++++++ 11 files changed, 812 insertions(+), 83 deletions(-) --- base-commit: 5b74b2eff1eeefe43584e5b7b348c8cd3b723d38 change-id: 20250716-memfd-exec-ac0d582018c3 Best regards, -- Abhinav Saxena <xandfury(a)gmail.com>

3 days, 8 hours

3
9
0 0

[PATCH] kunit: test: Assert parsed_filters allocation in parse_filter_attr_test()

by Guangshuo Li

kunit_kcalloc() may fail. parse_filter_attr_test() uses the returned pointer without checking it, and then writes to parsed_filters[j], which can lead to a NULL pointer dereference under low-memory conditions. Use KUNIT_ASSERT_NOT_ERR_OR_NULL() to abort the test on allocation failure, per KUnit guidance for unsafe-to-continue cases. Fixes: 1c9fd080dffe ("kunit: fix uninitialized variables bug in attributes filtering") Fixes: 76066f93f1df ("kunit: add tests for filtering attributes") Signed-off-by: Guangshuo Li <lgs201920130244(a)gmail.com> --- lib/kunit/executor_test.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/lib/kunit/executor_test.c b/lib/kunit/executor_test.c index f0090c2729cd..084636ad8a72 100644 --- a/lib/kunit/executor_test.c +++ b/lib/kunit/executor_test.c @@ -127,6 +127,10 @@ static void parse_filter_attr_test(struct kunit *test) parsed_filters = kunit_kcalloc(test, filter_count, sizeof(*parsed_filters), GFP_KERNEL); + + /* Abort test if allocation failed. */ + KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parsed_filters); + for (j = 0; j < filter_count; j++) { parsed_filters[j] = kunit_next_attr_filter(&filter, &err); KUNIT_ASSERT_EQ_MSG(test, err, 0, "failed to parse filter from '%s'", filters); -- 2.43.0

3 days, 8 hours

1
0
0 0

[PATCH] kselftest/arm64/gcs/basic-gcs: Respect parent directory CFLAGS

by Thomas Weißschuh

basic-gcs has it's own make rule to handle the special compiler invocation to build against nolibc. This rule does not respect the $(CFLAGS) passed by the Makefile from the parent directory. However these $(CFLAGS) set up the include path to include the UAPI headers from the current kernel. Due to this the asm/hwcap.h header is used from the toolchain instead of the UAPI and the definition of HWCAP_GCS is not found. Restructure the rule for basic-gcs to respect the $(CFLAGS). Also drop those options which are already provided by $(CFLAGS). Reported-by: Naresh Kamboju <naresh.kamboju(a)linaro.org> Closes: https://lore.kernel.org/lkml/CA+G9fYv77X+kKz2YT6xw7=9UrrotTbQ6fgNac7oohOg8B… Fixes: a985fe638344 ("kselftest/arm64/gcs: Use nolibc's getauxval()") Tested-by: Linux Kernel Functional Testing <lkft(a)linaro.org> Signed-off-by: Thomas Weißschuh <linux(a)weissschuh.net> --- tools/testing/selftests/arm64/gcs/Makefile | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/arm64/gcs/Makefile b/tools/testing/selftests/arm64/gcs/Makefile index d2f3497a9103fc12ebc90c7f4e33ab9b846c6c8a..1fbbf0ca1f0291d00882920eb2d1efbf99882ec1 100644 --- a/tools/testing/selftests/arm64/gcs/Makefile +++ b/tools/testing/selftests/arm64/gcs/Makefile @@ -14,11 +14,11 @@ LDLIBS+=-lpthread include ../../lib.mk $(OUTPUT)/basic-gcs: basic-gcs.c - $(CC) -g -fno-asynchronous-unwind-tables -fno-ident -s -Os -nostdlib \ - -static -include ../../../../include/nolibc/nolibc.h \ + $(CC) $(CFLAGS) -fno-asynchronous-unwind-tables -fno-ident -s -nostdlib -nostdinc \ + -static -I../../../../include/nolibc -include ../../../../include/nolibc/nolibc.h \ -I../../../../../usr/include \ -std=gnu99 -I../.. -g \ - -ffreestanding -Wall $^ -o $@ -lgcc + -ffreestanding $^ -o $@ -lgcc $(OUTPUT)/gcs-stress-thread: gcs-stress-thread.S $(CC) -nostdlib $^ -o $@ --- base-commit: 14a41628c470f4aa069075cdcf6ec0138b6cf1da change-id: 20250916-arm64-gcs-nolibc-7d1f03a2a3cf Best regards, -- Thomas Weißschuh <linux(a)weissschuh.net>

3 days, 11 hours

3
2
0 0

[PATCH v4 0/7] Add support for FEAT_{LS64, LS64_V} and related tests

by Yicong Yang

From: Yicong Yang <yangyicong(a)hisilicon.com> Armv8.7 introduces single-copy atomic 64-byte loads and stores instructions and its variants named under FEAT_{LS64, LS64_V}. Add support for Armv8.7 FEAT_{LS64, LS64_V}: - Add identifying and enabling in the cpufeature list - Expose the support of these features to userspace through HWCAP3 and cpuinfo - Add related hwcap test - Handle the trap of unsupported memory (normal/uncacheable) access in a VM A real scenario for this feature is that the userspace driver can make use of this to implement direct WQE (workqueue entry) - a mechanism to fill WQE directly into the hardware. Picked Marc's 2 patches form [1] for handling the LS64 trap in a VM on emulated MMIO and the introduce of KVM_EXIT_ARM_LDST64B. [1] https://lore.kernel.org/linux-arm-kernel/20240815125959.2097734-1-maz@kerne… Tested with updated hwcap test: [root@localhost tmp]# dmesg | grep "All CPU(s) started" [ 14.789859] CPU: All CPU(s) started at EL2 [root@localhost tmp]# ./hwcap # LS64 present ok 217 cpuinfo_match_LS64 ok 218 sigill_LS64 ok 219 # SKIP sigbus_LS64_V # LS64_V present ok 220 cpuinfo_match_LS64_V ok 221 sigill_LS64_V ok 222 # SKIP sigbus_LS64_V # 115 skipped test(s) detected. Consider enabling relevant config options to improve coverage. # Totals: pass:107 fail:0 xfail:0 xpass:0 skip:115 error:0 root@localhost:/mnt# dmesg | grep "All CPU(s) started" [ 0.281152] CPU: All CPU(s) started at EL1 root@localhost:/mnt# ./hwcap # LS64 present ok 217 cpuinfo_match_LS64 ok 218 sigill_LS64 ok 219 # SKIP sigbus_LS64 # LS64_V present ok 220 cpuinfo_match_LS64_V ok 221 sigill_LS64_V ok 222 # SKIP sigbus_LS64_V # 115 skipped test(s) detected. Consider enabling relevant config options to improve coverage. # Totals: pass:107 fail:0 xfail:0 xpass:0 skip:115 error:0 Change since v3: - Inject DABT fault for LS64 fault on unsupported memory but with valid memslot Link: https://lore.kernel.org/linux-arm-kernel/20250626080906.64230-1-yangyicong@… Change since v2: - Handle the LS64 fault to userspace and allow userspace to inject LS64 fault - Reorder the patches to make KVM handling prior to feature support Link: https://lore.kernel.org/linux-arm-kernel/20250331094320.35226-1-yangyicong@… Change since v1: - Drop the support for LS64_ACCDATA - handle the DABT of unsupported memory type after checking the memory attributes Link: https://lore.kernel.org/linux-arm-kernel/20241202135504.14252-1-yangyicong@… Marc Zyngier (2): KVM: arm64: Add exit to userspace on {LD,ST}64B* outside of memslots KVM: arm64: Add documentation for KVM_EXIT_ARM_LDST64B Yicong Yang (5): KVM: arm64: Handle DABT caused by LS64* instructions on unsupported memory arm64: Provide basic EL2 setup for FEAT_{LS64, LS64_V} usage at EL0/1 arm64: Add support for FEAT_{LS64, LS64_V} KVM: arm64: Enable FEAT_{LS64, LS64_V} in the supported guest kselftest/arm64: Add HWCAP test for FEAT_{LS64, LS64_V} Documentation/arch/arm64/booting.rst | 12 +++ Documentation/arch/arm64/elf_hwcaps.rst | 6 ++ Documentation/virt/kvm/api.rst | 43 +++++++++-- arch/arm64/include/asm/el2_setup.h | 12 ++- arch/arm64/include/asm/esr.h | 8 ++ arch/arm64/include/asm/hwcap.h | 2 + arch/arm64/include/asm/kvm_emulate.h | 7 ++ arch/arm64/include/uapi/asm/hwcap.h | 2 + arch/arm64/kernel/cpufeature.c | 51 +++++++++++++ arch/arm64/kernel/cpuinfo.c | 2 + arch/arm64/kvm/inject_fault.c | 29 ++++++++ arch/arm64/kvm/mmio.c | 27 ++++++- arch/arm64/kvm/mmu.c | 14 +++- arch/arm64/tools/cpucaps | 2 + include/uapi/linux/kvm.h | 3 +- tools/testing/selftests/arm64/abi/hwcap.c | 90 +++++++++++++++++++++++ 16 files changed, 299 insertions(+), 11 deletions(-) -- 2.24.0

3 days, 13 hours

4
18
0 0

[PATCH bpf-next v3 00/14] selftests/bpf: Integrate test_xsk.c to test_progs framework

by Bastien Curutchet (eBPF Foundation)

Hi all, This is a second version of a series I sent some time ago, it continues the work of migrating the script tests into prog_tests. The test_xsk.sh script covers many AF_XDP use cases. The tests it runs are defined in xksxceiver.c. Since this script is used to test real hardware, the goal here is to leave it as it is, and only integrate the tests that run on veth peers into the test_progs framework. Some tests are flaky so they can't be integrated in the CI as they are. I think that fixing their flakyness would require a significant amount of work. So, as first step, I've excluded them from the list of tests migrated to the CI (see PATCH 13). If these tests get fixed at some point, integrating them into the CI will be straightforward. PATCH 1 extracts test_xsk[.c/.h] from xskxceiver[.c/.h] to make the tests available to test_progs. PATCH 2 to 5 fix small issues in the current test PATCH 7 to 12 handle all errors to release resources instead of calling exit() when any error occurs. PATCH 13 isolates some flaky tests PATCH 14 integrate the non-flaky tests to the test_progs framework Maciej, I've fixed the bug you found in the initial series. I've looked for any hardware able to run test_xsk.sh in my office, but I couldn't find one ... So here again, only the veth part has been tested, sorry about that. Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet(a)bootlin.com> --- Changes in v3: - Rebase on latest bpf-next_base to integrate commit c9110e6f7237 ("selftests/bpf: Fix count write in testapp_xdp_metadata_copy()"). - Move XDP_METADATA_COPY_* tests from flaky-tests to nominal tests - Link to v2: https://lore.kernel.org/r/20250902-xsk-v2-0-17c6345d5215@bootlin.com Changes in v2: - Rebase on the latest bpf-next_base and integrate the newly added tests to the work (adjust_tail* and tx_queue_consumer tests) - Re-order patches to split xkxceiver sooner. - Fix the bug reported by Maciej. - Fix verbose mode in test_xsk.sh by keeping kselftest (remove PATCH 1, 7 and 8) - Link to v1: https://lore.kernel.org/r/20250313-xsk-v1-0-7374729a93b9@bootlin.com --- Bastien Curutchet (eBPF Foundation) (14): selftests/bpf: test_xsk: Split xskxceiver selftests/bpf: test_xsk: Initialize bitmap before use selftests/bpf: test_xsk: Fix memory leaks selftests/bpf: test_xsk: Wrap test clean-up in functions selftests/bpf: test_xsk: Release resources when swap fails selftests/bpf: test_xsk: Add return value to init_iface() selftests/bpf: test_xsk: Don't exit immediately when xsk_attach fails selftests/bpf: test_xsk: Don't exit immediately when gettimeofday fails selftests/bpf: test_xsk: Don't exit immediately when workers fail selftests/bpf: test_xsk: Don't exit immediately if validate_traffic fails selftests/bpf: test_xsk: Don't exit immediately on allocation failures selftests/bpf: test_xsk: Move exit_with_error to xskxceiver.c selftests/bpf: test_xsk: Isolate flaky tests selftests/bpf: test_xsk: Integrate test_xsk.c to test_progs framework tools/testing/selftests/bpf/Makefile | 11 +- tools/testing/selftests/bpf/prog_tests/test_xsk.c | 2604 ++++++++++++++++++++ tools/testing/selftests/bpf/prog_tests/test_xsk.h | 294 +++ tools/testing/selftests/bpf/prog_tests/xsk.c | 146 ++ tools/testing/selftests/bpf/xskxceiver.c | 2685 +-------------------- tools/testing/selftests/bpf/xskxceiver.h | 156 -- 6 files changed, 3170 insertions(+), 2726 deletions(-) --- base-commit: e4e08c130231eb8071153ab5f056874d8f70430b change-id: 20250218-xsk-0cf90e975d14 Best regards, -- Bastien Curutchet (eBPF Foundation) <bastien.curutchet(a)bootlin.com>

3 days, 14 hours

4
25
0 0

[PATCH v19 net-next 00/10] AccECN protocol patch series

by chia-yu.chang＠nokia-bell-labs.com

From: Chia-Yu Chang <chia-yu.chang(a)nokia-bell-labs.com> Hello, Please find the v19 AccECN protocol patch series, which covers the core functionality of Accurate ECN, AccECN negotiation, AccECN TCP options, and AccECN failure handling. The Accurate ECN draft can be found in https://datatracker.ietf.org/doc/html/draft-ietf-tcpm-accurate-ecn-28, and it will be RFC9768. This patch series is part of the full AccECN patch series, which is available at https://github.com/L4STeam/linux-net-next/commits/upstream_l4steam/ Best Regards, Chia-Yu --- v19 (16-Sep-2025) - Repost remaining 10 patches in this series, as the first 4 patches are applied (Jakub Kicinski <kuba(a)kernel.org>) v18 (11-Sep-2025) - Reorder tcpi_accecn_fail_mode and tcpi_accecn_opt_seen to avoid adding fields in the middle of tcp_info (Eric Dumazet <edumazet(a)google.com>) v17 (8-Sep-2025) - Change tcp_ecn_mode_max from 5 to 2 to disable AccECN enablement before the whole AccECN feature been accpeted v16 (6-Sep-2025) - Use TCP_ECN_IN_ACCECN_OUT_ACCECN, TCP_ECN_IN_ECN_OUT_ECN, and TCP_ECN_IN_ACCECN_OUT_ECN in comments of tcp_ecn_send_syn() (Eric Dumazet <edumazet(a)google.com>) - Add tcpi_accecn_fail_mode and tcpi_accecn_opt_seen to make tcp_info be multiple of 64 bits in patch #12 v15 (14-Aug-205) - Update pahole results in commit messages - Accurate ECN will become RFC9768 v14 (22-Jul-2025) - Add missing const for struct tcp_sock of tcp_accecn_option_beacon_check() of #11 (Simon Horman <horms(a)kernel.org>) v13 (18-Jul-2025) - Implement tcp_accecn_extract_syn_ect() and tcp_accecn_reflector_flags() with static array lookup of patch #6 (Paolo Abeni <pabeni(a)redhat.com>) - Fix typos in comments of #6 and remove patch #7 of v12 about simulatenous connect (Paolo Abeni <pabeni(a)redhat.com>) - Move TCP_ACCECN_E1B_INIT_OFFSET, TCP_ACCECN_E0B_INIT_OFFSET, and TCP_ACCECN_CEB_INIT_OFFSET from patch #7 to #11 (Paolo Abeni <pabeni(a)redhat.com>) - Use static array lookup in tcp_accecn_optfield_to_ecnfield() of patch #11 (Paolo Abeni <pabeni(a)redhat.com>) - Return false when WARN_ON_ONCE() is true in tcp_accecn_process_option() of patch #11 (Paolo Abeni <pabeni(a)redhat.com>) - Make synack_ecn_bytes as static const array and use const u32 pointer in tcp_options_write() of #11 (Paolo Abeni <pabeni(a)redhat.com>) - Use ALIGN() and ALIGN_DOWN() in tcp_options_fit_accecn() to pad TCP AccECN option to dword of #11 (Paolo Abeni <pabeni(a)redhat.com>) - Return TCP_ACCECN_OPT_FAIL_SEEN if WARN_ON_ONCE() is true in tcp_accecn_option_init() of #12 (Paolo Abeni <pabeni(a)redhat.com>) v12 (04-Jul-2025) - Fix compilation issues with some intermediate patches in v11 - Add more comments for AccECN helpers of tcp_ecn.h v11 (03-Jul-2025) - Fix compilation issues with some intermediate patches in v10 v10 (02-Jul-2025) - Add new patch of separated header file include/net/tcp_ecn.h to include ECN and AccECN functions (Eric Dumazet <edumazet(a)google.com>) - Add comments on the AccECN helper functions in tcp_ecn.h (Eric Dumazet <edumazet(a)google.com>) - Add documentation of tcp_ecn, tcp_ecn_option, tcp_ecn_beacon in ip-sysctl.rst to the corresponding patch (Eric Dumazet <edumazet(a)google.com>) - Split wait third ACK functionality into a separated patch from AccECN negotiation patch (Eric Dumazet <edumazet(a)google.com>) - Add READ_ONCE() over every reads of sysctl for all patches in the series (Eric Dumazet <edumazet(a)google.com>) - Merge heuristics of AccECN option ceb/cep and ACE field multi-wrap into a single patch - Add a table of SACK block reduction and required AccECN field in patch #15 commit message (Eric Dumazet <edumazet(a)google.com>) v9 (21-Jun-2025) - Use tcp_data_ecn_check() to set TCP_ECN_SEE flag only for RFC3168 ECN (Paolo Abeni <pabeni(a)redhat.com>) - Add comments about setting TCP_ECN_SEEN flag for RFC3168 and Accruate ECN (Paolo Abeni <pabeni(a)redhat.com>) - Restruct the code in the for loop of tcp_accecn_process_option() (Paolo Abeni <pabeni(a)redhat.com>) - Remove ecn_bytes and add use_synack_ecn_bytes flag to identify whether syn_ack_bytes or received_ecn_bytes is used (Paolo Abeni <pabeni(a)redhat.com>) - Replace leftover_bytes and leftover_size with leftover_highbyte and leftover_lowbyte and add comments in tcp_options_write() (Paolo Abeni <pabeni(a)redhat.com>) - Add comments and commit message about the 1st retx SYN still attempt AccECN negotiation (Paolo Abeni <pabeni(a)redhat.com>) v8 (10-Jun-2025) - Add new helper function tcp_ecn_received_counters_payload() in #6 (Paolo Abeni <pabeni(a)redhat.com>) - Set opts->num_sack_blocks=0 to avoid potential undefined value in #8 (Paolo Abeni <pabeni(a)redhat.com>) - Reset leftover_size to 2 once leftover_bytes is used in #9 (Paolo Abeni <pabeni(a)redhat.com>) - Add new helper function tcp_accecn_opt_demand_min() in #10 (Paolo Abeni <pabeni(a)redhat.com>) - Add new helper function tcp_accecn_saw_opt_fail_recv() in #11 (Paolo Abeni <pabeni(a)redhat.com>) - Update tcp_options_fit_accecn() to avoid using recursion in #14 (Paolo Abeni <pabeni(a)redhat.com>) v7 (14-May-2025) - Modify group sizes of tcp_sock_write_txrx and tcp_sock_write_rx in #3 based on pahole results (Paolo Abeni <pabeni(a)redhat.com>) - Fix the issue in #4 and #5 where the RFC3168 ECN behavior in tcp_ecn_send() is changed (Paolo Abeni <pabeni(a)redhat.com>) - Modify group size of tcp_sock_write_txrx in #4 and #6 based on pahole results (Paolo Abeni <pabeni(a)redhat.com>) - Update commit message for #9 to explain the increase in tcp_sock_write_rx group size - Modify group size of tcp_sock_write_tx in #10 based on pahole results v6 (09-May-2025) - Add #3 to utilize exisintg holes of tcp_sock_write_txrx group for later patches (#4, #9, #10) with new u8 members (Paolo Abeni <pabeni(a)redhat.com>) - Add pahole outcomes before and after commit in #4, #5, #6, #9, #10, #15 (Paolo Abeni <pabeni(a)redhat.com>) - Define new helper function tcp_send_ack_reflect_ect() for sending ACK with reflected ECT in #5 (Paolo Abeni <pabeni(a)redhat.com>) - Add comments for function tcp_ecn_rcv_synack() in #5 (Paolo Abeni <pabeni(a)redhat.com>) - Add enum/define to be used by sysctl_tcp_ecn in #5, sysctl_tcp_ecn_option in #9, and sysctl_tcp_ecn_option_beacon in #10 (Paolo Abeni <pabeni(a)redhat.com>) - Move accecn_fail_mode and saw_accecn_opt in #5 and #11 to use exisintg holes of tcp_sock (Paolo Abeni <pabeni(a)redhat.com>) - Change data type of new members of tcp_request_sock and move them to the end of struct in #5 and #11 (Paolo Abeni <pabeni(a)redhat.com>) - Move new members of tcp_info to the end of struct in #6 (Paolo Abeni <pabeni(a)redhat.com>) - Merge previous #7 into #9 (Paolo Abeni <pabeni(a)redhat.com>) - Mask ecnfield with INET_ECN_MASK to remove WARN_ONCE in #9 (Paolo Abeni <pabeni(a)redhat.com>) - Reduce the indentation levels for reabability in #9 and #10 (Paolo Abeni <pabeni(a)redhat.com>) - Move delivered_ecn_bytes to the RX group in #9, accecn_opt_tstamp to the TX group in #10, pkts_acked_ewma to the RX group in #15 (Paolo Abeni <pabeni(a)redhat.com>) - Add changes in Documentation/networking/net_cachelines/tcp_sock.rst for new tcp_sock members in #3, #5, #6, #9, #10, #15 v5 (22-Apr-2025) - Further fix for 32-bit ARM alignment in tcp.c (Simon Horman <horms(a)kernel.org>) v4 (18-Apr-2025) - Fix 32-bit ARM assertion for alignment requirement (Simon Horman <horms(a)kernel.org>) v3 (14-Apr-2025) - Fix patch apply issue in v2 (Jakub Kicinski <kuba(a)kernel.org>) v2 (18-Mar-2025) - Add one missing patch from the previous AccECN protocol preparation patch series to this patch series. --- Chia-Yu Chang (3): tcp: accecn: AccECN option send control tcp: accecn: AccECN option failure handling tcp: accecn: try to fit AccECN option with SACK Ilpo Järvinen (7): tcp: AccECN core tcp: accecn: AccECN negotiation tcp: accecn: add AccECN rx byte counters tcp: accecn: AccECN needs to know delivered bytes tcp: sack option handling improvements tcp: accecn: AccECN option tcp: accecn: AccECN option ceb/cep and ACE field multi-wrap heuristics Documentation/networking/ip-sysctl.rst | 55 +- .../networking/net_cachelines/tcp_sock.rst | 12 + include/linux/tcp.h | 28 +- include/net/netns/ipv4.h | 2 + include/net/tcp.h | 33 ++ include/net/tcp_ecn.h | 554 +++++++++++++++++- include/uapi/linux/tcp.h | 9 + net/ipv4/syncookies.c | 4 + net/ipv4/sysctl_net_ipv4.c | 19 + net/ipv4/tcp.c | 30 +- net/ipv4/tcp_input.c | 318 +++++++++- net/ipv4/tcp_ipv4.c | 8 +- net/ipv4/tcp_minisocks.c | 40 +- net/ipv4/tcp_output.c | 239 +++++++- net/ipv6/syncookies.c | 2 + net/ipv6/tcp_ipv6.c | 1 + 16 files changed, 1278 insertions(+), 76 deletions(-) -- 2.34.1

3 days, 15 hours

3
13
0 0

[PATCH] PMCR_EL0.N is RAZ/WI. At least a build failes in Ubuntu 22.04 LTS. Remove the set function.

by Itaru Kitayama

Signed-off-by: Itaru Kitayama <itaru.kitayama(a)fujitsu.com> --- Seen a build failure with old Ubuntu 22.04 LTS, while the latest release has no build issue, a write to the bit fields is RAZ/WI, remove the function. --- tools/testing/selftests/kvm/arm64/vpmu_counter_access.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/tools/testing/selftests/kvm/arm64/vpmu_counter_access.c b/tools/testing/selftests/kvm/arm64/vpmu_counter_access.c index f16b3b27e32ed7ca57481f27d689d47783aa0345..56214a4430be90b3e1d840f2719b22dd44f0b49b 100644 --- a/tools/testing/selftests/kvm/arm64/vpmu_counter_access.c +++ b/tools/testing/selftests/kvm/arm64/vpmu_counter_access.c @@ -45,11 +45,6 @@ static uint64_t get_pmcr_n(uint64_t pmcr) return FIELD_GET(ARMV8_PMU_PMCR_N, pmcr); } -static void set_pmcr_n(uint64_t *pmcr, uint64_t pmcr_n) -{ - u64p_replace_bits((__u64 *) pmcr, pmcr_n, ARMV8_PMU_PMCR_N); -} - static uint64_t get_counters_mask(uint64_t n) { uint64_t mask = BIT(ARMV8_PMU_CYCLE_IDX); @@ -490,7 +485,6 @@ static void test_create_vpmu_vm_with_pmcr_n(uint64_t pmcr_n, bool expect_fail) * Setting a larger value of PMCR.N should not modify the field, and * return a success. */ - set_pmcr_n(&pmcr, pmcr_n); vcpu_set_reg(vcpu, KVM_ARM64_SYS_REG(SYS_PMCR_EL0), pmcr); pmcr = vcpu_get_reg(vcpu, KVM_ARM64_SYS_REG(SYS_PMCR_EL0)); --- base-commit: aae5a9834b388860844b294c70c8770dd26e528c change-id: 20250912-selftest-fix3-27f285e79d82 Best regards, -- Itaru Kitayama <itaru.kitayama(a)linux.dev>

3 days, 17 hours

3
6
0 0

[PATCHv2 net 1/2] bonding: fix xfrm offload feature setup on active-backup mode

by Hangbin Liu

The active-backup bonding mode supports XFRM ESP offload. However, when a bond is added using command like `ip link add bond0 type bond mode 1 miimon 100`, the `ethtool -k` command shows that the XFRM ESP offload is disabled. This occurs because, in bond_newlink(), we change bond link first and register bond device later. So the XFRM feature update in bond_option_mode_set() is not called as the bond device is not yet registered, leading to the offload feature not being set successfully. To resolve this issue, we can modify the code order in bond_newlink() to ensure that the bond device is registered first before changing the bond link parameters. This change will allow the XFRM ESP offload feature to be correctly enabled. Fixes: 007ab5345545 ("bonding: fix feature flag setting at init time") Signed-off-by: Hangbin Liu <liuhangbin(a)gmail.com> --- v2: rebase to latest net, no code update --- drivers/net/bonding/bond_main.c | 2 +- drivers/net/bonding/bond_netlink.c | 16 +++++++++------- include/net/bonding.h | 1 + 3 files changed, 11 insertions(+), 8 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 57be04f6cb11..f4f0feddd9fa 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4411,7 +4411,7 @@ void bond_work_init_all(struct bonding *bond) INIT_DELAYED_WORK(&bond->slave_arr_work, bond_slave_arr_handler); } -static void bond_work_cancel_all(struct bonding *bond) +void bond_work_cancel_all(struct bonding *bond) { cancel_delayed_work_sync(&bond->mii_work); cancel_delayed_work_sync(&bond->arp_work); diff --git a/drivers/net/bonding/bond_netlink.c b/drivers/net/bonding/bond_netlink.c index 57fff2421f1b..7a9d73ec8e91 100644 --- a/drivers/net/bonding/bond_netlink.c +++ b/drivers/net/bonding/bond_netlink.c @@ -579,20 +579,22 @@ static int bond_newlink(struct net_device *bond_dev, struct rtnl_newlink_params *params, struct netlink_ext_ack *extack) { + struct bonding *bond = netdev_priv(bond_dev); struct nlattr **data = params->data; struct nlattr **tb = params->tb; int err; - err = bond_changelink(bond_dev, tb, data, extack); - if (err < 0) + err = register_netdevice(bond_dev); + if (err) return err; - err = register_netdevice(bond_dev); - if (!err) { - struct bonding *bond = netdev_priv(bond_dev); + netif_carrier_off(bond_dev); + bond_work_init_all(bond); - netif_carrier_off(bond_dev); - bond_work_init_all(bond); + err = bond_changelink(bond_dev, tb, data, extack); + if (err) { + bond_work_cancel_all(bond); + unregister_netdevice(bond_dev); } return err; diff --git a/include/net/bonding.h b/include/net/bonding.h index e06f0d63b2c1..bd56ad976cfb 100644 --- a/include/net/bonding.h +++ b/include/net/bonding.h @@ -711,6 +711,7 @@ struct bond_vlan_tag *bond_verify_device_path(struct net_device *start_dev, int bond_update_slave_arr(struct bonding *bond, struct slave *skipslave); void bond_slave_arr_work_rearm(struct bonding *bond, unsigned long delay); void bond_work_init_all(struct bonding *bond); +void bond_work_cancel_all(struct bonding *bond); #ifdef CONFIG_PROC_FS void bond_create_proc_entry(struct bonding *bond); -- 2.50.1

3 days, 20 hours

1
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror September 2025