September 2025 - Linux-kselftest-mirror

New September Order. 93035 Friday, September 12, 2025 at 12:16:14 PM

by Info - Albinayah 868

Hi Linux-kselftest, Please provide a quote for your products: Include: 1.Pricing (per unit) 2.Delivery cost & timeline 3.Quote expiry date Deadline: September Thanks! Kamal Prasad Albinayah Trading

3 months

1
0
0 0

[PATCHv3 net-next 0/5] net: common feature compute for upper interface

by Hangbin Liu

Some high-level virtual drivers need to compute features from their lower devices, but each currently has its own implementation and may miss some feature computations. This patch set introduces a common function to compute features for such devices. Currently, bonding, team, and bridge have been updated to use the new helper. v3: a) fix hw_enc_features asign order (Sabrina Dubroca) b) set virtual dev feature defination in netdev_features.h (Jakub Kicinski) c) remove unneeded err in team_del_slave (Stanislav Fomichev) d) remove NETIF_F_HW_ESP test as it needs to be test with GSO pkts (Sabrina Dubroca) v2: a) remove hard_header_len setting. I will set needed_headroom for bond/team in a separate patch as bridge has it's own ways. (Ido Schimmel) b) Add test file to Makefile, set RET=0 to a proper location. (Ido Schimmel) Hangbin Liu (5): net: add a common function to compute features from lowers devices bonding: use common function to compute the features team: use common function to compute the features net: bridge: use common function to compute the features selftests/net: add offload checking test for virtual interface drivers/net/bonding/bond_main.c | 99 +------------- drivers/net/team/team_core.c | 78 +---------- include/linux/netdev_features.h | 18 +++ include/linux/netdevice.h | 1 + net/bridge/br_if.c | 22 +--- net/core/dev.c | 76 +++++++++++ tools/testing/selftests/net/Makefile | 1 + tools/testing/selftests/net/config | 1 + tools/testing/selftests/net/vdev_offload.sh | 137 ++++++++++++++++++++ 9 files changed, 246 insertions(+), 187 deletions(-) create mode 100755 tools/testing/selftests/net/vdev_offload.sh -- 2.50.1

3 months

4
11
0 0

[PATCH bpf-next v3 0/4] powerpc64/bpf: Add support for bpf arena and arena atomics

by Saket Kumar Bhaskar

This patch series introduces support for the PROBE_MEM32, bpf_addr_space_cast and PROBE_ATOMIC instructions in the powerpc BPF JIT, facilitating the implementation of BPF arena and arena atomics. All selftests related to bpf_arena, bpf_arena_atomic(except load_acquire/store_release) enablement are passing: # ./test_progs -t arena_list #5/1 arena_list/arena_list_1:OK #5/2 arena_list/arena_list_1000:OK #5 arena_list:OK Summary: 1/2 PASSED, 0 SKIPPED, 0 FAILED # ./test_progs -t arena_htab #4/1 arena_htab/arena_htab_llvm:OK #4/2 arena_htab/arena_htab_asm:OK #4 arena_htab:OK Summary: 1/2 PASSED, 0 SKIPPED, 0 FAILED # ./test_progs -t verifier_arena #464/1 verifier_arena/basic_alloc1:OK #464/2 verifier_arena/basic_alloc2:OK #464/3 verifier_arena/basic_alloc3:OK #464/4 verifier_arena/iter_maps1:OK #464/5 verifier_arena/iter_maps2:OK #464/6 verifier_arena/iter_maps3:OK #464 verifier_arena:OK #465/1 verifier_arena_large/big_alloc1:OK #465/2 verifier_arena_large/big_alloc2:OK #465 verifier_arena_large:OK Summary: 2/8 PASSED, 0 SKIPPED, 0 FAILED # ./test_progs -t arena_atomics #3/1 arena_atomics/add:OK #3/2 arena_atomics/sub:OK #3/3 arena_atomics/and:OK #3/4 arena_atomics/or:OK #3/5 arena_atomics/xor:OK #3/6 arena_atomics/cmpxchg:OK #3/7 arena_atomics/xchg:OK #3/8 arena_atomics/uaf:OK #3/9 arena_atomics/load_acquire:SKIP #3/10 arena_atomics/store_release:SKIP #3 arena_atomics:OK (SKIP: 2/10) Summary: 1/8 PASSED, 2 SKIPPED, 0 FAILED Changes since v2: * Dropped arena_spin_lock selftest fix patch from the patchset as it has to go via bpf-next while these changes will go via powerpc tree. v2:https://lore.kernel.org/all/20250829165135.1273071-1-skb99@linux.ibm.com/ Changes since v1: Addressed comments from Chris: * Squashed introduction of bpf_jit_emit_probe_mem_store() and its usage in one patch. * Defined and used PPC_RAW_RLDICL_DOT to avoid the CMPDI. * Removed conditional statement for fixup[0] = PPC_RAW_LI(dst_reg, 0); * Indicated this change is limited to powerpc64 in subject. Addressed comments from Alexei: * Removed skel->rodata->nr_cpus = get_nprocs() and its usage to get currently online cpus(as it needs to be updated from userspace). Addressed comments from Hari: * Updated the bpf jit stack layout and associated macros to accommodate new NVR. v1:https://lore.kernel.org/all/20250805062747.3479221-1-skb99@linux.ibm.com/ Saket Kumar Bhaskar (4): powerpc64/bpf: Implement PROBE_MEM32 pseudo instructions powerpc64/bpf: Implement bpf_addr_space_cast instruction powerpc64/bpf: Introduce bpf_jit_emit_atomic_ops() to emit atomic instructions powerpc64/bpf: Implement PROBE_ATOMIC instructions arch/powerpc/include/asm/ppc-opcode.h | 1 + arch/powerpc/net/bpf_jit.h | 6 +- arch/powerpc/net/bpf_jit_comp.c | 32 +- arch/powerpc/net/bpf_jit_comp32.c | 2 +- arch/powerpc/net/bpf_jit_comp64.c | 401 +++++++++++++++++++------- 5 files changed, 330 insertions(+), 112 deletions(-) -- 2.43.5

3 months

2
5
0 0

[PATCH net-next 1/2] selftests: Disable dad for ipv6 in fcnal-test.sh

by David Ahern

Constrained test environment; duplicate address detection is not needed and causes races so disable it. Signed-off-by: David Ahern <dsahern(a)kernel.org> --- tools/testing/selftests/net/fcnal-test.sh | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/testing/selftests/net/fcnal-test.sh b/tools/testing/selftests/net/fcnal-test.sh index 69941520e8e5..068379a79651 100755 --- a/tools/testing/selftests/net/fcnal-test.sh +++ b/tools/testing/selftests/net/fcnal-test.sh @@ -424,6 +424,8 @@ create_ns() ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.keep_addr_on_down=1 ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.forwarding=1 ip netns exec ${ns} sysctl -qw net.ipv6.conf.default.forwarding=1 + ip netns exec ${ns} sysctl -qw net.ipv6.conf.default.accept_dad=0 + ip netns exec ${ns} sysctl -qw net.ipv6.conf.all.accept_dad=0 } # create veth pair to connect namespaces and apply addresses. -- 2.43.0

3 months

3
4
0 0

[PATCH net-next 0/5] net: common feature compute for upper interface

by Hangbin Liu

Some high-level virtual drivers need to compute features from their lower devices, but each currently has its own implementation and may miss some feature computations. This patch set introduces a common function to compute features for such devices. Currently, bonding, team, and bridge have been updated to use the new helper. Hangbin Liu (5): net: add a common function to compute features from lowers devices bonding: use common function to compute the features team: use common function to compute the features net: bridge: use common function to compute the features selftests/net: add offload checking test for virtual interface drivers/net/bonding/bond_main.c | 99 +---------- drivers/net/team/team_core.c | 73 +------- include/linux/netdevice.h | 19 +++ net/bridge/br_if.c | 22 +-- net/core/dev.c | 79 +++++++++ tools/testing/selftests/net/config | 2 + tools/testing/selftests/net/vdev_offload.sh | 174 ++++++++++++++++++++ 7 files changed, 285 insertions(+), 183 deletions(-) create mode 100755 tools/testing/selftests/net/vdev_offload.sh -- 2.50.1

3 months

4
15
0 0

[PATCHv5 iproute2-next] iplink: bond_slave: add support for actor_port_prio

by Hangbin Liu

Add support for the actor_port_prio option for bond slaves. This per-port priority can be used by the bonding driver in ad_select to choose the higher-priority aggregator during failover. Signed-off-by: Hangbin Liu <liuhangbin(a)gmail.com> --- v5: rename port in ad_select_tbl to actor_port_prio v4: no update v3: rename ad_actor_port_prio to actor_port_prio v2: no update --- ip/iplink_bond.c | 1 + ip/iplink_bond_slave.c | 18 ++++++++++++++++-- man/man8/ip-link.8.in | 6 ++++++ 3 files changed, 23 insertions(+), 2 deletions(-) diff --git a/ip/iplink_bond.c b/ip/iplink_bond.c index d6960f6d9b03..3ae626a03e6e 100644 --- a/ip/iplink_bond.c +++ b/ip/iplink_bond.c @@ -91,6 +91,7 @@ static const char *ad_select_tbl[] = { "stable", "bandwidth", "count", + "actor_port_prio", NULL, }; diff --git a/ip/iplink_bond_slave.c b/ip/iplink_bond_slave.c index ad6875006950..c88100e248dd 100644 --- a/ip/iplink_bond_slave.c +++ b/ip/iplink_bond_slave.c @@ -15,7 +15,9 @@ static void print_explain(FILE *f) { - fprintf(f, "Usage: ... bond_slave [ queue_id ID ] [ prio PRIORITY ]\n"); + fprintf(f, "Usage: ... bond_slave [ queue_id ID ] [ prio PRIORITY ]\n" + " [ actor_port_prio PRIORITY ]\n" + ); } static void explain(void) @@ -145,12 +147,18 @@ static void bond_slave_print_opt(struct link_util *lu, FILE *f, struct rtattr *t state); print_slave_oper_state(f, "ad_partner_oper_port_state_str", state); } + + if (tb[IFLA_BOND_SLAVE_ACTOR_PORT_PRIO]) + print_int(PRINT_ANY, + "actor_port_prio", + "actor_port_prio %d ", + rta_getattr_u16(tb[IFLA_BOND_SLAVE_ACTOR_PORT_PRIO])); } static int bond_slave_parse_opt(struct link_util *lu, int argc, char **argv, struct nlmsghdr *n) { - __u16 queue_id; + __u16 queue_id, actor_port_prio; int prio; while (argc > 0) { @@ -164,6 +172,12 @@ static int bond_slave_parse_opt(struct link_util *lu, int argc, char **argv, if (get_s32(&prio, *argv, 0)) invarg("prio is invalid", *argv); addattr32(n, 1024, IFLA_BOND_SLAVE_PRIO, prio); + } else if (strcmp(*argv, "actor_port_prio") == 0) { + NEXT_ARG(); + if (get_u16(&actor_port_prio, *argv, 0)) + invarg("actor prio is invalid", *argv); + addattr16(n, 1024, IFLA_BOND_SLAVE_ACTOR_PORT_PRIO, + actor_port_prio); } else { if (matches(*argv, "help") != 0) fprintf(stderr, diff --git a/man/man8/ip-link.8.in b/man/man8/ip-link.8.in index e3297c577152..7995943ab11f 100644 --- a/man/man8/ip-link.8.in +++ b/man/man8/ip-link.8.in @@ -2846,6 +2846,12 @@ the following additional arguments are supported: (a 32bit signed value). This option only valid for active-backup(1), balance-tlb (5) and balance-alb (6) mode. +.sp +.BI actor_port_prio " PRIORITY" +- set the slave's ad actor port priority for 802.3ad aggregation selection +logic during failover (a 16bit unsigned value). This option only valid for +802.3ad (4) mode. + .in -8 .TP -- 2.50.1

3 months

2
1
0 0

[PATCH v2 0/1] seccomp: Add SECCOMP_CLONE_FILTER operation

by Tom Hromatka

Add an operation, SECCOMP_CLONE_FILTER, that can copy the seccomp filters from another process to the current process. Changes from v1 to v2: * Fixed locking issues. Thanks Al, Alexei, and Kees :) * Allow filters to be cloned if CAP_SYS_ADMIN or no new privs is set * I initially had only CAP_SYS_ADMIN, but I can't think of a way no new privs is harmful here, so I added it. Thanks, Kees * Switch to passing in pidfd directly rather than a pointer to a pidfd * This more closely aligns with other pidfd syscalls * Fixed warning in the sample code reported by the test robot * Various cleanups and improvements in the selftest Note that I left in the restriction that the target process has no seccomp filters already loaded. I could see this limitation being removed in a later patchset, but there are requests for this feature at present. Finally, I re-ran the performance numbers and updated the patch with the latest numbers. The locking changes significantly sped up the clone operation, and it's now ~1900x faster than the current method. Tom Hromatka (1): seccomp: Add SECCOMP_CLONE_FILTER operation .../userspace-api/seccomp_filter.rst | 10 ++ include/uapi/linux/seccomp.h | 1 + kernel/seccomp.c | 48 ++++++ samples/seccomp/.gitignore | 1 + samples/seccomp/Makefile | 2 +- samples/seccomp/clone-filter.c | 150 ++++++++++++++++++ tools/include/uapi/linux/seccomp.h | 1 + tools/testing/selftests/seccomp/seccomp_bpf.c | 114 +++++++++++++ 8 files changed, 326 insertions(+), 1 deletion(-) create mode 100644 samples/seccomp/clone-filter.c -- 2.47.3

3 months

1
1
0 0

[PATCH v17 net-next 00/14] AccECN protocol patch series

by chia-yu.chang＠nokia-bell-labs.com

From: Chia-Yu Chang <chia-yu.chang(a)nokia-bell-labs.com> Hello, Please find the v17 AccECN protocol patch series, which covers the core functionality of Accurate ECN, AccECN negotiation, AccECN TCP options, and AccECN failure handling. The Accurate ECN draft can be found in https://datatracker.ietf.org/doc/html/draft-ietf-tcpm-accurate-ecn-28, and it will be RFC9768. This patch series is part of the full AccECN patch series, which is available at https://github.com/L4STeam/linux-net-next/commits/upstream_l4steam/ Best Regards, Chia-Yu --- v17 (8-Sep-2025) - Change tcp_ecn_mode_max from 5 to 2 to disable AccECN enablement before the whole AccECN feature been accpeted v16 (6-Sep-2025) - Use TCP_ECN_IN_ACCECN_OUT_ACCECN, TCP_ECN_IN_ECN_OUT_ECN, and TCP_ECN_IN_ACCECN_OUT_ECN in comments of tcp_ecn_send_syn() (Eric Dumazet <edumazet(a)google.com>) - Add tcpi_accecn_fail_mode and tcpi_accecn_opt_seen to make tcp_info be multiple of 64 bits in patch #12 v15 (14-Aug-205) - Update pahole results in commit messages - Accurate ECN will become RFC9768 v14 (22-Jul-2025) - Add missing const for struct tcp_sock of tcp_accecn_option_beacon_check() of #11 (Simon Horman <horms(a)kernel.org>) v13 (18-Jul-2025) - Implement tcp_accecn_extract_syn_ect() and tcp_accecn_reflector_flags() with static array lookup of patch #6 (Paolo Abeni <pabeni(a)redhat.com>) - Fix typos in comments of #6 and remove patch #7 of v12 about simulatenous connect (Paolo Abeni <pabeni(a)redhat.com>) - Move TCP_ACCECN_E1B_INIT_OFFSET, TCP_ACCECN_E0B_INIT_OFFSET, and TCP_ACCECN_CEB_INIT_OFFSET from patch #7 to #11 (Paolo Abeni <pabeni(a)redhat.com>) - Use static array lookup in tcp_accecn_optfield_to_ecnfield() of patch #11 (Paolo Abeni <pabeni(a)redhat.com>) - Return false when WARN_ON_ONCE() is true in tcp_accecn_process_option() of patch #11 (Paolo Abeni <pabeni(a)redhat.com>) - Make synack_ecn_bytes as static const array and use const u32 pointer in tcp_options_write() of #11 (Paolo Abeni <pabeni(a)redhat.com>) - Use ALIGN() and ALIGN_DOWN() in tcp_options_fit_accecn() to pad TCP AccECN option to dword of #11 (Paolo Abeni <pabeni(a)redhat.com>) - Return TCP_ACCECN_OPT_FAIL_SEEN if WARN_ON_ONCE() is true in tcp_accecn_option_init() of #12 (Paolo Abeni <pabeni(a)redhat.com>) v12 (04-Jul-2025) - Fix compilation issues with some intermediate patches in v11 - Add more comments for AccECN helpers of tcp_ecn.h v11 (03-Jul-2025) - Fix compilation issues with some intermediate patches in v10 v10 (02-Jul-2025) - Add new patch of separated header file include/net/tcp_ecn.h to include ECN and AccECN functions (Eric Dumazet <edumazet(a)google.com>) - Add comments on the AccECN helper functions in tcp_ecn.h (Eric Dumazet <edumazet(a)google.com>) - Add documentation of tcp_ecn, tcp_ecn_option, tcp_ecn_beacon in ip-sysctl.rst to the corresponding patch (Eric Dumazet <edumazet(a)google.com>) - Split wait third ACK functionality into a separated patch from AccECN negotiation patch (Eric Dumazet <edumazet(a)google.com>) - Add READ_ONCE() over every reads of sysctl for all patches in the series (Eric Dumazet <edumazet(a)google.com>) - Merge heuristics of AccECN option ceb/cep and ACE field multi-wrap into a single patch - Add a table of SACK block reduction and required AccECN field in patch #15 commit message (Eric Dumazet <edumazet(a)google.com>) v9 (21-Jun-2025) - Use tcp_data_ecn_check() to set TCP_ECN_SEE flag only for RFC3168 ECN (Paolo Abeni <pabeni(a)redhat.com>) - Add comments about setting TCP_ECN_SEEN flag for RFC3168 and Accruate ECN (Paolo Abeni <pabeni(a)redhat.com>) - Restruct the code in the for loop of tcp_accecn_process_option() (Paolo Abeni <pabeni(a)redhat.com>) - Remove ecn_bytes and add use_synack_ecn_bytes flag to identify whether syn_ack_bytes or received_ecn_bytes is used (Paolo Abeni <pabeni(a)redhat.com>) - Replace leftover_bytes and leftover_size with leftover_highbyte and leftover_lowbyte and add comments in tcp_options_write() (Paolo Abeni <pabeni(a)redhat.com>) - Add comments and commit message about the 1st retx SYN still attempt AccECN negotiation (Paolo Abeni <pabeni(a)redhat.com>) v8 (10-Jun-2025) - Add new helper function tcp_ecn_received_counters_payload() in #6 (Paolo Abeni <pabeni(a)redhat.com>) - Set opts->num_sack_blocks=0 to avoid potential undefined value in #8 (Paolo Abeni <pabeni(a)redhat.com>) - Reset leftover_size to 2 once leftover_bytes is used in #9 (Paolo Abeni <pabeni(a)redhat.com>) - Add new helper function tcp_accecn_opt_demand_min() in #10 (Paolo Abeni <pabeni(a)redhat.com>) - Add new helper function tcp_accecn_saw_opt_fail_recv() in #11 (Paolo Abeni <pabeni(a)redhat.com>) - Update tcp_options_fit_accecn() to avoid using recursion in #14 (Paolo Abeni <pabeni(a)redhat.com>) v7 (14-May-2025) - Modify group sizes of tcp_sock_write_txrx and tcp_sock_write_rx in #3 based on pahole results (Paolo Abeni <pabeni(a)redhat.com>) - Fix the issue in #4 and #5 where the RFC3168 ECN behavior in tcp_ecn_send() is changed (Paolo Abeni <pabeni(a)redhat.com>) - Modify group size of tcp_sock_write_txrx in #4 and #6 based on pahole results (Paolo Abeni <pabeni(a)redhat.com>) - Update commit message for #9 to explain the increase in tcp_sock_write_rx group size - Modify group size of tcp_sock_write_tx in #10 based on pahole results v6 (09-May-2025) - Add #3 to utilize exisintg holes of tcp_sock_write_txrx group for later patches (#4, #9, #10) with new u8 members (Paolo Abeni <pabeni(a)redhat.com>) - Add pahole outcomes before and after commit in #4, #5, #6, #9, #10, #15 (Paolo Abeni <pabeni(a)redhat.com>) - Define new helper function tcp_send_ack_reflect_ect() for sending ACK with reflected ECT in #5 (Paolo Abeni <pabeni(a)redhat.com>) - Add comments for function tcp_ecn_rcv_synack() in #5 (Paolo Abeni <pabeni(a)redhat.com>) - Add enum/define to be used by sysctl_tcp_ecn in #5, sysctl_tcp_ecn_option in #9, and sysctl_tcp_ecn_option_beacon in #10 (Paolo Abeni <pabeni(a)redhat.com>) - Move accecn_fail_mode and saw_accecn_opt in #5 and #11 to use exisintg holes of tcp_sock (Paolo Abeni <pabeni(a)redhat.com>) - Change data type of new members of tcp_request_sock and move them to the end of struct in #5 and #11 (Paolo Abeni <pabeni(a)redhat.com>) - Move new members of tcp_info to the end of struct in #6 (Paolo Abeni <pabeni(a)redhat.com>) - Merge previous #7 into #9 (Paolo Abeni <pabeni(a)redhat.com>) - Mask ecnfield with INET_ECN_MASK to remove WARN_ONCE in #9 (Paolo Abeni <pabeni(a)redhat.com>) - Reduce the indentation levels for reabability in #9 and #10 (Paolo Abeni <pabeni(a)redhat.com>) - Move delivered_ecn_bytes to the RX group in #9, accecn_opt_tstamp to the TX group in #10, pkts_acked_ewma to the RX group in #15 (Paolo Abeni <pabeni(a)redhat.com>) - Add changes in Documentation/networking/net_cachelines/tcp_sock.rst for new tcp_sock members in #3, #5, #6, #9, #10, #15 v5 (22-Apr-2025) - Further fix for 32-bit ARM alignment in tcp.c (Simon Horman <horms(a)kernel.org>) v4 (18-Apr-2025) - Fix 32-bit ARM assertion for alignment requirement (Simon Horman <horms(a)kernel.org>) v3 (14-Apr-2025) - Fix patch apply issue in v2 (Jakub Kicinski <kuba(a)kernel.org>) v2 (18-Mar-2025) - Add one missing patch from the previous AccECN protocol preparation patch series to this patch series. --- Chia-Yu Chang (5): tcp: reorganize tcp_sock_write_txrx group for variables later tcp: ecn functions in separated include file tcp: accecn: AccECN option send control tcp: accecn: AccECN option failure handling tcp: accecn: try to fit AccECN option with SACK Ilpo Järvinen (9): tcp: reorganize SYN ECN code tcp: fast path functions later tcp: AccECN core tcp: accecn: AccECN negotiation tcp: accecn: add AccECN rx byte counters tcp: accecn: AccECN needs to know delivered bytes tcp: sack option handling improvements tcp: accecn: AccECN option tcp: accecn: AccECN option ceb/cep and ACE field multi-wrap heuristics Documentation/networking/ip-sysctl.rst | 55 +- .../networking/net_cachelines/tcp_sock.rst | 12 + include/linux/tcp.h | 32 +- include/net/netns/ipv4.h | 2 + include/net/tcp.h | 87 ++- include/net/tcp_ecn.h | 642 ++++++++++++++++++ include/uapi/linux/tcp.h | 9 + net/ipv4/syncookies.c | 4 + net/ipv4/sysctl_net_ipv4.c | 19 + net/ipv4/tcp.c | 30 +- net/ipv4/tcp_input.c | 353 ++++++++-- net/ipv4/tcp_ipv4.c | 8 +- net/ipv4/tcp_minisocks.c | 40 +- net/ipv4/tcp_output.c | 294 ++++++-- net/ipv6/syncookies.c | 2 + net/ipv6/tcp_ipv6.c | 1 + 16 files changed, 1406 insertions(+), 184 deletions(-) create mode 100644 include/net/tcp_ecn.h -- 2.34.1

3 months

3
20
0 0

[PATCH net-next v3] selftests: net: Add tests to verify team driver option set and get.

by Marc Harvey

There are currently no kernel tests that verify setting and getting options of the team driver. In the future, options may be added that implicitly change other options, which will make it useful to have tests like these that show nothing breaks. There will be a follow up patch to this that adds new "rx_enabled" and "tx_enabled" options, which will implicitly affect the "enabled" option value and vice versa. The tests use teamnl to first set options to specific values and then gets them to compare to the set values. Signed-off-by: Marc Harvey <marcharvey(a)google.com> --- Changes in v3: - Applied minor style changes based on v2 feedback. - Link to v2: https://lore.kernel.org/netdev/20250904015424.1228665-1-marcharvey@google.c… Changes in v2: - Fixed shellcheck failures. - Fixed test failing in vng by adding a config option to enable the team driver's active backup mode. - Link to v1: https://lore.kernel.org/netdev/20250902235504.4190036-1-marcharvey@google.c… .../selftests/drivers/net/team/Makefile | 6 +- .../testing/selftests/drivers/net/team/config | 1 + .../selftests/drivers/net/team/options.sh | 188 ++++++++++++++++++ 3 files changed, 193 insertions(+), 2 deletions(-) create mode 100755 tools/testing/selftests/drivers/net/team/options.sh diff --git a/tools/testing/selftests/drivers/net/team/Makefile b/tools/testing/selftests/drivers/net/team/Makefile index eaf6938f100e..89d854c7e674 100644 --- a/tools/testing/selftests/drivers/net/team/Makefile +++ b/tools/testing/selftests/drivers/net/team/Makefile @@ -1,11 +1,13 @@ # SPDX-License-Identifier: GPL-2.0 # Makefile for net selftests -TEST_PROGS := dev_addr_lists.sh propagation.sh +TEST_PROGS := dev_addr_lists.sh propagation.sh options.sh TEST_INCLUDES := \ ../bonding/lag_lib.sh \ ../../../net/forwarding/lib.sh \ - ../../../net/lib.sh + ../../../net/lib.sh \ + ../../../net/in_netns.sh \ + ../../../net/lib/sh/defer.sh include ../../../lib.mk diff --git a/tools/testing/selftests/drivers/net/team/config b/tools/testing/selftests/drivers/net/team/config index 636b3525b679..558e1d0cf565 100644 --- a/tools/testing/selftests/drivers/net/team/config +++ b/tools/testing/selftests/drivers/net/team/config @@ -3,4 +3,5 @@ CONFIG_IPV6=y CONFIG_MACVLAN=y CONFIG_NETDEVSIM=m CONFIG_NET_TEAM=y +CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=y CONFIG_NET_TEAM_MODE_LOADBALANCE=y diff --git a/tools/testing/selftests/drivers/net/team/options.sh b/tools/testing/selftests/drivers/net/team/options.sh new file mode 100755 index 000000000000..44888f32b513 --- /dev/null +++ b/tools/testing/selftests/drivers/net/team/options.sh @@ -0,0 +1,188 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +# These tests verify basic set and get functionality of the team +# driver options over netlink. + +# Run in private netns. +test_dir="$(dirname "$0")" +if [[ $# -eq 0 ]]; then + "${test_dir}"/../../../net/in_netns.sh "$0" __subprocess + exit $? +fi + +ALL_TESTS=" + team_test_options +" + +source "${test_dir}/../../../net/lib.sh" + +TEAM_PORT="team0" +MEMBER_PORT="dummy0" + +setup() +{ + ip link add name "${MEMBER_PORT}" type dummy + ip link add name "${TEAM_PORT}" type team +} + +get_and_check_value() +{ + local option_name="$1" + local expected_value="$2" + local port_flag="$3" + + local value_from_get + + if ! value_from_get=$(teamnl "${TEAM_PORT}" getoption "${option_name}" \ + "${port_flag}"); then + echo "Could not get option '${option_name}'" >&2 + return 1 + fi + + if [[ "${value_from_get}" != "${expected_value}" ]]; then + echo "Incorrect value for option '${option_name}'" >&2 + echo "get (${value_from_get}) != set (${expected_value})" >&2 + return 1 + fi +} + +set_and_check_get() +{ + local option_name="$1" + local option_value="$2" + local port_flag="$3" + + local value_from_get + + if ! teamnl "${TEAM_PORT}" setoption "${option_name}" \ + "${option_value}" "${port_flag}"; then + echo "'setoption ${option_name} ${option_value}' failed" >&2 + return 1 + fi + + get_and_check_value "${option_name}" "${option_value}" "${port_flag}" + return $? +} + +# Get a "port flag" to pass to the `teamnl` command. +# E.g. $1="dummy0" -> "port=dummy0", +# $1="" -> "" +get_port_flag() +{ + local port_name="$1" + + if [[ -n "${port_name}" ]]; then + echo "--port=${port_name}" + fi +} + +attach_port_if_specified() +{ + local port_name="$1" + + if [[ -n "${port_name}" ]]; then + ip link set dev "${port_name}" master "${TEAM_PORT}" + return $? + fi +} + +detach_port_if_specified() +{ + local port_name="$1" + + if [[ -n "${port_name}" ]]; then + ip link set dev "${port_name}" nomaster + return $? + fi +} + +# Test that an option's get value matches its set value. +# Globals: +# RET - Used by testing infra like `check_err`. +# EXIT_STATUS - Used by `log_test` for whole script exit value. +# Arguments: +# option_name - The name of the option. +# value_1 - The first value to try setting. +# value_2 - The second value to try setting. +# port_name - The (optional) name of the attached port. +team_test_option() +{ + local option_name="$1" + local value_1="$2" + local value_2="$3" + local possible_values="$2 $3 $2" + local port_name="$4" + local port_flag + + RET=0 + + echo "Setting '${option_name}' to '${value_1}' and '${value_2}'" + + attach_port_if_specified "${port_name}" + check_err $? "Couldn't attach ${port_name} to master" + port_flag=$(get_port_flag "${port_name}") + + # Set and get both possible values. + for value in ${possible_values}; do + set_and_check_get "${option_name}" "${value}" "${port_flag}" + check_err $? "Failed to set '${option_name}' to '${value}'" + done + + detach_port_if_specified "${port_name}" + check_err $? "Couldn't detach ${port_name} from its master" + + log_test "Set + Get '${option_name}' test" +} + +# Test that getting a non-existant option fails. +# Globals: +# RET - Used by testing infra like `check_err`. +# EXIT_STATUS - Used by `log_test` for whole script exit value. +# Arguments: +# option_name - The name of the option. +# port_name - The (optional) name of the attached port. +team_test_get_option_fails() +{ + local option_name="$1" + local port_name="$2" + local port_flag + + RET=0 + + attach_port_if_specified "${port_name}" + check_err $? "Couldn't attach ${port_name} to master" + port_flag=$(get_port_flag "${port_name}") + + # Just confirm that getting the value fails. + teamnl "${TEAM_PORT}" getoption "${option_name}" "${port_flag}" + check_fail $? "Shouldn't be able to get option '${option_name}'" + + detach_port_if_specified "${port_name}" + + log_test "Get '${option_name}' fails" +} + +team_test_options() +{ + # Wrong option name behavior. + team_test_get_option_fails fake_option1 + team_test_get_option_fails fake_option2 "${MEMBER_PORT}" + + # Correct set and get behavior. + team_test_option mode activebackup loadbalance + team_test_option notify_peers_count 0 5 + team_test_option notify_peers_interval 0 5 + team_test_option mcast_rejoin_count 0 5 + team_test_option mcast_rejoin_interval 0 5 + team_test_option enabled true false "${MEMBER_PORT}" + team_test_option user_linkup true false "${MEMBER_PORT}" + team_test_option user_linkup_enabled true false "${MEMBER_PORT}" + team_test_option priority 10 20 "${MEMBER_PORT}" + team_test_option queue_id 0 1 "${MEMBER_PORT}" +} + +require_command teamnl +setup +tests_run +exit "${EXIT_STATUS}" -- 2.51.0.384.g4c02a37b29-goog

3 months

2
1
0 0

[PATCH net-next 0/5] netconsole: support automatic target recovery

by Andre Carvalho

This patch series introduces target resume capability to netconsole allowing it to recover targets when underlying low-level interface comes back online. Signed-off-by: Andre Carvalho <asantostc(a)gmail.com> --- Andre Carvalho (3): netconsole: convert 'enabled' flag to enum for clearer state management netconsole: resume previously deactivated target selftests: netconsole: validate target reactivation Breno Leitao (2): netconsole: add target_state enum netconsole: add STATE_DEACTIVATED to track targets disabled by low level drivers/net/netconsole.c | 110 ++++++++++++++++----- tools/testing/selftests/drivers/net/Makefile | 1 + .../selftests/drivers/net/lib/sh/lib_netcons.sh | 23 +++++ .../selftests/drivers/net/netcons_resume.sh | 68 +++++++++++++ 4 files changed, 175 insertions(+), 27 deletions(-) --- base-commit: 3b4296f5893d3a4e19edfc3800cb79381095e55f change-id: 20250816-netcons-retrigger-a4f547bfc867 Best regards, -- Andre Carvalho <asantostc(a)gmail.com>

3 months

3
9
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror September 2025