February 2025 - Linux-kselftest-mirror

[PATCH bpf-next v7 0/5] xsk: TX metadata Launch Time support

by Song Yoong Siang

This series expands the XDP TX metadata framework to allow user applications to pass per packet 64-bit launch time directly to the kernel driver, requesting launch time hardware offload support. The XDP TX metadata framework will not perform any clock conversion or packet reordering. Please note that the role of Tx metadata is just to pass the launch time, not to enable the offload feature. Users will need to enable the launch time hardware offload feature of the device by using the respective command, such as the tc-etf command. Although some devices use the tc-etf command to enable their launch time hardware offload feature, xsk packets will not go through the etf qdisc. Therefore, in my opinion, the launch time should always be based on the PTP Hardware Clock (PHC). Thus, i did not include a clock ID to indicate the clock source. To simplify the test steps, I modified the xdp_hw_metadata bpf self-test tool in such a way that it will set the launch time based on the offset provided by the user and the value of the Receive Hardware Timestamp, which is against the PHC. This will eliminate the need to discipline System Clock with the PHC and then use clock_gettime() to get the time. Please note that AF_XDP lacks a feedback mechanism to inform the application if the requested launch time is invalid. So, users are expected to familiar with the horizon of the launch time of the device they use and not request a launch time that is beyond the horizon. Otherwise, the driver might interpret the launch time incorrectly and react wrongly. For stmmac and igc, where modulo computation is used, a launch time larger than the horizon will cause the device to transmit the packet earlier that the requested launch time. Although there is no feedback mechanism for the launch time request for now, user still can check whether the requested launch time is working or not, by requesting the Transmit Completion Hardware Timestamp. V7: - split the refactoring code of igc empty packet insertion into a separate commit (Faizal) - add explanation on why the value "4" is used as igc transmit budget (Faizal) - perform a stress test by sending 1000 packets with 10ms interval and launch time set to 500us in the future (Faizal & Yong Liang) V6: https://lore.kernel.org/netdev/20250116155350.555374-1-yoong.siang.song@int… - fix selftest build errors by using asprintf() and realloc(), instead of managing the buffer sizes manually (Daniel, Stanislav) V5: https://lore.kernel.org/netdev/20250114152718.120588-1-yoong.siang.song@int… - change netdev feature name from tx-launch-time to tx-launch-time-fifo to explicitly state the FIFO behaviour (Stanislav) - improve the looping of xdp_hw_metadata app to wait for packet tx completion to be more readable by using clock_gettime() (Stanislav) - add launch time setup steps into xdp_hw_metadata app (Stanislav) V4: https://lore.kernel.org/netdev/20250106135506.9687-1-yoong.siang.song@intel… - added XDP launch time support to the igc driver (Jesper & Florian) - added per-driver launch time limitation on xsk-tx-metadata.rst (Jesper) - added explanation on FIFO behavior on xsk-tx-metadata.rst (Jakub) - added step to enable launch time in the commit message (Jesper & Willem) - explicitly documented the type of launch_time and which clock source it is against (Willem) V3: https://lore.kernel.org/netdev/20231203165129.1740512-1-yoong.siang.song@in… - renamed to use launch time (Jesper & Willem) - changed the default launch time in xdp_hw_metadata apps from 1s to 0.1s because some NICs do not support such a large future time. V2: https://lore.kernel.org/netdev/20231201062421.1074768-1-yoong.siang.song@in… - renamed to use Earliest TxTime First (Willem) - renamed to use txtime (Willem) V1: https://lore.kernel.org/netdev/20231130162028.852006-1-yoong.siang.song@int… Song Yoong Siang (5): xsk: Add launch time hardware offload support to XDP Tx metadata selftests/bpf: Add launch time request to xdp_hw_metadata net: stmmac: Add launch time support to XDP ZC igc: Refactor empty packet insertion into a reusable function igc: Add launch time support to XDP ZC Documentation/netlink/specs/netdev.yaml | 4 + Documentation/networking/xsk-tx-metadata.rst | 62 +++++++ drivers/net/ethernet/intel/igc/igc_main.c | 84 ++++++--- drivers/net/ethernet/stmicro/stmmac/stmmac.h | 2 + .../net/ethernet/stmicro/stmmac/stmmac_main.c | 13 ++ include/net/xdp_sock.h | 10 ++ include/net/xdp_sock_drv.h | 1 + include/uapi/linux/if_xdp.h | 10 ++ include/uapi/linux/netdev.h | 3 + net/core/netdev-genl.c | 2 + net/xdp/xsk.c | 3 + tools/include/uapi/linux/if_xdp.h | 10 ++ tools/include/uapi/linux/netdev.h | 3 + tools/testing/selftests/bpf/xdp_hw_metadata.c | 168 +++++++++++++++++- 14 files changed, 348 insertions(+), 27 deletions(-) -- 2.34.1

3 weeks, 6 days

5
18
0 0

[PATCH Linux-6.12.y 1/1] selftests/mm: build with -O2

by Yifei Liu

From: Kevin Brodsky <kevin.brodsky(a)arm.com> [ Upstream commit 46036188ea1f5266df23a6149dea0df1c77cd1c7 ] The mm kselftests are currently built with no optimisation (-O0). It's unclear why, and besides being obviously suboptimal, this also prevents the pkeys tests from working as intended. Let's build all the tests with -O2. [kevin.brodsky(a)arm.com: silence unused-result warnings] Link: https://lkml.kernel.org/r/20250107170110.2819685-1-kevin.brodsky@arm.com Link: https://lkml.kernel.org/r/20241209095019.1732120-6-kevin.brodsky@arm.com Signed-off-by: Kevin Brodsky <kevin.brodsky(a)arm.com> Cc: Aruna Ramakrishna <aruna.ramakrishna(a)oracle.com> Cc: Catalin Marinas <catalin.marinas(a)arm.com> Cc: Dave Hansen <dave.hansen(a)linux.intel.com> Cc: Joey Gouly <joey.gouly(a)arm.com> Cc: Keith Lucas <keith.lucas(a)oracle.com> Cc: Ryan Roberts <ryan.roberts(a)arm.com> Cc: Shuah Khan <shuah(a)kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> (cherry picked from commit 46036188ea1f5266df23a6149dea0df1c77cd1c7) [Yifei: This commit also fix the failure of pkey_sighandler_tests_64, which is also in linux-6.12.y, thus backport this commit] Signed-off-by: Yifei Liu <yifei.l.liu(a)oracle.com> --- tools/testing/selftests/mm/Makefile | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/mm/Makefile b/tools/testing/selftests/mm/Makefile index 02e1204971b0..c0138cb19705 100644 --- a/tools/testing/selftests/mm/Makefile +++ b/tools/testing/selftests/mm/Makefile @@ -33,9 +33,16 @@ endif # LDLIBS. MAKEFLAGS += --no-builtin-rules -CFLAGS = -Wall -I $(top_srcdir) $(EXTRA_CFLAGS) $(KHDR_INCLUDES) $(TOOLS_INCLUDES) +CFLAGS = -Wall -O2 -I $(top_srcdir) $(EXTRA_CFLAGS) $(KHDR_INCLUDES) $(TOOLS_INCLUDES) LDLIBS = -lrt -lpthread -lm +# Some distributions (such as Ubuntu) configure GCC so that _FORTIFY_SOURCE is +# automatically enabled at -O1 or above. This triggers various unused-result +# warnings where functions such as read() or write() are called and their +# return value is not checked. Disable _FORTIFY_SOURCE to silence those +# warnings. +CFLAGS += -U_FORTIFY_SOURCE + TEST_GEN_FILES = cow TEST_GEN_FILES += compaction_test TEST_GEN_FILES += gup_longterm -- 2.46.0

3 weeks, 6 days

2
1
0 0

[PATCH] bpf: Fix mix-up of 4096 and page size.

by Saket Kumar Bhaskar

For platforms on powerpc architecture with a default page size greater than 4096, there was an inconsistency in fragment size calculation. This caused the BPF selftest xdp_adjust_tail/xdp_adjust_frags_tail_grow to fail on powerpc. The issue occurred because the fragment buffer size in bpf_prog_test_run_xdp() was set to 4096, while the actual data size in the fragment within the shared skb was checked against PAGE_SIZE (65536 on powerpc) in min_t, causing it to exceed 4096 and be set accordingly. This discrepancy led to an overflow when bpf_xdp_frags_increase_tail() checked for tailroom, as skb_frag_size(frag) could be greater than rxq->frag_size (when PAGE_SIZE > 4096). This commit updates the page size references to 4096 to ensure consistency and prevent overflow issues in fragment size calculations. Fixes: 1c1949982524 ("bpf: introduce frags support to bpf_prog_test_run_xdp()") Signed-off-by: Saket Kumar Bhaskar <skb99(a)linux.ibm.com> --- net/bpf/test_run.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/net/bpf/test_run.c b/net/bpf/test_run.c index 501ec4249..eb5476184 100644 --- a/net/bpf/test_run.c +++ b/net/bpf/test_run.c @@ -124,7 +124,7 @@ struct xdp_test_data { * must be updated accordingly this gets changed, otherwise BPF selftests * will fail. */ -#define TEST_XDP_FRAME_SIZE (PAGE_SIZE - sizeof(struct xdp_page_head)) +#define TEST_XDP_FRAME_SIZE (4096 - sizeof(struct xdp_page_head)) #define TEST_XDP_MAX_BATCH 256 static void xdp_test_run_init_page(netmem_ref netmem, void *arg) @@ -660,7 +660,7 @@ static void *bpf_test_init(const union bpf_attr *kattr, u32 user_size, void __user *data_in = u64_to_user_ptr(kattr->test.data_in); void *data; - if (size < ETH_HLEN || size > PAGE_SIZE - headroom - tailroom) + if (size < ETH_HLEN || size > 4096 - headroom - tailroom) return ERR_PTR(-EINVAL); if (user_size > size) @@ -1297,7 +1297,7 @@ int bpf_prog_test_run_xdp(struct bpf_prog *prog, const union bpf_attr *kattr, frag = &sinfo->frags[sinfo->nr_frags++]; data_len = min_t(u32, kattr->test.data_size_in - size, - PAGE_SIZE); + 4096); skb_frag_fill_page_desc(frag, page, 0, data_len); if (copy_from_user(page_address(page), data_in + size, -- 2.43.5

3 weeks, 6 days

3
4
0 0

[PATCH][next] KVM: selftests: Fix spelling mistake "initally" -> "initially"

by Colin Ian King

There is a spelling mistake in a literal string. Fix it. Signed-off-by: Colin Ian King <colin.i.king(a)gmail.com> --- tools/testing/selftests/kvm/s390/cmma_test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/s390/cmma_test.c b/tools/testing/selftests/kvm/s390/cmma_test.c index e32dd59703a0..7fbbe8b912b6 100644 --- a/tools/testing/selftests/kvm/s390/cmma_test.c +++ b/tools/testing/selftests/kvm/s390/cmma_test.c @@ -651,7 +651,7 @@ struct testdef { } testlist[] = { { "migration mode and dirty tracking", test_migration_mode }, { "GET_CMMA_BITS: basic calls", test_get_cmma_basic }, - { "GET_CMMA_BITS: all pages are dirty initally", test_get_inital_dirty }, + { "GET_CMMA_BITS: all pages are dirty initially", test_get_inital_dirty }, { "GET_CMMA_BITS: holes are skipped", test_get_skip_holes }, }; -- 2.47.2

3 weeks, 6 days

2
1
0 0

[PATCH net-next v2 0/2] netdevgenl: Add an xsk attribute to queues

by Joe Damato

Greetings: This is an attempt to followup on something Jakub asked me about [1], adding an xsk attribute to queues and more clearly documenting which queues are linked to NAPIs... After the RFC [2], Jakub suggested creating an empty nest for queues which have a pool, so I've adjusted this version to work that way. The nest can be extended in the future to express attributes about XSK as needed. Queues which are not used for AF_XDP do not have the xsk attribute present. I've run the included test on: - my mlx5 machine (via NETIF=) - without setting NETIF And the test seems to pass in both cases. Thanks, Joe [1]: https://lore.kernel.org/netdev/20250113143109.60afa59a@kernel.org/ [2]: https://lore.kernel.org/netdev/20250129172431.65773-1-jdamato@fastly.com/ v2: - Switched from RFC to actual submission now that net-next is open - Adjusted patch 1 to include an empty nest as suggested by Jakub - Adjusted patch 2 to update the test based on changes to patch 1, and to incorporate some Python feedback from Jakub :) rfc: https://lore.kernel.org/netdev/20250129172431.65773-1-jdamato@fastly.com/ Joe Damato (2): netdev-genl: Add an XSK attribute to queues selftests: drv-net: Test queue xsk attribute Documentation/netlink/specs/netdev.yaml | 13 ++- include/uapi/linux/netdev.h | 6 ++ net/core/netdev-genl.c | 11 +++ tools/include/uapi/linux/netdev.h | 6 ++ .../testing/selftests/drivers/net/.gitignore | 2 + tools/testing/selftests/drivers/net/Makefile | 3 + tools/testing/selftests/drivers/net/queues.py | 35 +++++++- .../selftests/drivers/net/xdp_helper.c | 90 +++++++++++++++++++ 8 files changed, 163 insertions(+), 3 deletions(-) create mode 100644 tools/testing/selftests/drivers/net/.gitignore create mode 100644 tools/testing/selftests/drivers/net/xdp_helper.c base-commit: c2933b2befe25309f4c5cfbea0ca80909735fd76 -- 2.25.1

4 weeks

2
2
0 0

[PATCH AUTOSEL 6.1 2/2] selftests: gpio: gpio-sim: Fix missing chip disablements

by Sasha Levin

From: Koichiro Den <koichiro.den(a)canonical.com> [ Upstream commit f8524ac33cd452aef5384504b3264db6039a455e ] Since upstream commit 8bd76b3d3f3a ("gpio: sim: lock up configfs that an instantiated device depends on"), rmdir for an active virtual devices been prohibited. Update gpio-sim selftest to align with the change. Reported-by: kernel test robot <oliver.sang(a)intel.com> Closes: https://lore.kernel.org/oe-lkp/202501221006.a1ca5dfa-lkp@intel.com Signed-off-by: Koichiro Den <koichiro.den(a)canonical.com> Link: https://lore.kernel.org/r/20250122043309.304621-1-koichiro.den@canonical.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski(a)linaro.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/gpio/gpio-sim.sh | 31 +++++++++++++++++++----- 1 file changed, 25 insertions(+), 6 deletions(-) diff --git a/tools/testing/selftests/gpio/gpio-sim.sh b/tools/testing/selftests/gpio/gpio-sim.sh index bf67b23ed29ac..46101a800bebf 100755 --- a/tools/testing/selftests/gpio/gpio-sim.sh +++ b/tools/testing/selftests/gpio/gpio-sim.sh @@ -46,12 +46,6 @@ remove_chip() { rmdir $CONFIGFS_DIR/$CHIP || fail "Unable to remove the chip" } -configfs_cleanup() { - for CHIP in `ls $CONFIGFS_DIR/`; do - remove_chip $CHIP - done -} - create_chip() { local CHIP=$1 @@ -105,6 +99,13 @@ disable_chip() { echo 0 > $CONFIGFS_DIR/$CHIP/live || fail "Unable to disable the chip" } +configfs_cleanup() { + for CHIP in `ls $CONFIGFS_DIR/`; do + disable_chip $CHIP + remove_chip $CHIP + done +} + configfs_chip_name() { local CHIP=$1 local BANK=$2 @@ -181,6 +182,7 @@ create_chip chip create_bank chip bank enable_chip chip test -n `cat $CONFIGFS_DIR/chip/bank/chip_name` || fail "chip_name doesn't work" +disable_chip chip remove_chip chip echo "1.2. chip_name returns 'none' if the chip is still pending" @@ -195,6 +197,7 @@ create_chip chip create_bank chip bank enable_chip chip test -n `cat $CONFIGFS_DIR/chip/dev_name` || fail "dev_name doesn't work" +disable_chip chip remove_chip chip echo "2. Creating and configuring simulated chips" @@ -204,6 +207,7 @@ create_chip chip create_bank chip bank enable_chip chip test "`get_chip_num_lines chip bank`" = "1" || fail "default number of lines is not 1" +disable_chip chip remove_chip chip echo "2.2. Number of lines can be specified" @@ -212,6 +216,7 @@ create_bank chip bank set_num_lines chip bank 16 enable_chip chip test "`get_chip_num_lines chip bank`" = "16" || fail "number of lines is not 16" +disable_chip chip remove_chip chip echo "2.3. Label can be set" @@ -220,6 +225,7 @@ create_bank chip bank set_label chip bank foobar enable_chip chip test "`get_chip_label chip bank`" = "foobar" || fail "label is incorrect" +disable_chip chip remove_chip chip echo "2.4. Label can be left empty" @@ -227,6 +233,7 @@ create_chip chip create_bank chip bank enable_chip chip test -z "`cat $CONFIGFS_DIR/chip/bank/label`" || fail "label is not empty" +disable_chip chip remove_chip chip echo "2.5. Line names can be configured" @@ -238,6 +245,7 @@ set_line_name chip bank 2 bar enable_chip chip test "`get_line_name chip bank 0`" = "foo" || fail "line name is incorrect" test "`get_line_name chip bank 2`" = "bar" || fail "line name is incorrect" +disable_chip chip remove_chip chip echo "2.6. Line config can remain unused if offset is greater than number of lines" @@ -248,6 +256,7 @@ set_line_name chip bank 5 foobar enable_chip chip test "`get_line_name chip bank 0`" = "" || fail "line name is incorrect" test "`get_line_name chip bank 1`" = "" || fail "line name is incorrect" +disable_chip chip remove_chip chip echo "2.7. Line configfs directory names are sanitized" @@ -267,6 +276,7 @@ for CHIP in $CHIPS; do enable_chip $CHIP done for CHIP in $CHIPS; do + disable_chip $CHIP remove_chip $CHIP done @@ -278,6 +288,7 @@ echo foobar > $CONFIGFS_DIR/chip/bank/label 2> /dev/null && \ fail "Setting label of a live chip should fail" echo 8 > $CONFIGFS_DIR/chip/bank/num_lines 2> /dev/null && \ fail "Setting number of lines of a live chip should fail" +disable_chip chip remove_chip chip echo "2.10. Can't create line items when chip is live" @@ -285,6 +296,7 @@ create_chip chip create_bank chip bank enable_chip chip mkdir $CONFIGFS_DIR/chip/bank/line0 2> /dev/null && fail "Creating line item should fail" +disable_chip chip remove_chip chip echo "2.11. Probe errors are propagated to user-space" @@ -316,6 +328,7 @@ mkdir -p $CONFIGFS_DIR/chip/bank/line4/hog enable_chip chip $BASE_DIR/gpio-mockup-cdev -s 1 /dev/`configfs_chip_name chip bank` 4 2> /dev/null && \ fail "Setting the value of a hogged line shouldn't succeed" +disable_chip chip remove_chip chip echo "3. Controlling simulated chips" @@ -331,6 +344,7 @@ test "$?" = "1" || fail "pull set incorrectly" sysfs_set_pull chip bank 0 pull-down $BASE_DIR/gpio-mockup-cdev /dev/`configfs_chip_name chip bank` 1 test "$?" = "0" || fail "pull set incorrectly" +disable_chip chip remove_chip chip echo "3.2. Pull can be read from sysfs" @@ -344,6 +358,7 @@ SYSFS_PATH=/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/pull test `cat $SYSFS_PATH` = "pull-down" || fail "reading the pull failed" sysfs_set_pull chip bank 0 pull-up test `cat $SYSFS_PATH` = "pull-up" || fail "reading the pull failed" +disable_chip chip remove_chip chip echo "3.3. Incorrect input in sysfs is rejected" @@ -355,6 +370,7 @@ DEVNAME=`configfs_dev_name chip` CHIPNAME=`configfs_chip_name chip bank` SYSFS_PATH="/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/pull" echo foobar > $SYSFS_PATH 2> /dev/null && fail "invalid input not detected" +disable_chip chip remove_chip chip echo "3.4. Can't write to value" @@ -365,6 +381,7 @@ DEVNAME=`configfs_dev_name chip` CHIPNAME=`configfs_chip_name chip bank` SYSFS_PATH="/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/value" echo 1 > $SYSFS_PATH 2> /dev/null && fail "writing to 'value' succeeded unexpectedly" +disable_chip chip remove_chip chip echo "4. Simulated GPIO chips are functional" @@ -382,6 +399,7 @@ $BASE_DIR/gpio-mockup-cdev -s 1 /dev/`configfs_chip_name chip bank` 0 & sleep 0.1 # FIXME Any better way? test `cat $SYSFS_PATH` = "1" || fail "incorrect value read from sysfs" kill $! +disable_chip chip remove_chip chip echo "4.2. Bias settings work correctly" @@ -394,6 +412,7 @@ CHIPNAME=`configfs_chip_name chip bank` SYSFS_PATH="/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/value" $BASE_DIR/gpio-mockup-cdev -b pull-up /dev/`configfs_chip_name chip bank` 0 test `cat $SYSFS_PATH` = "1" || fail "bias setting does not work" +disable_chip chip remove_chip chip echo "GPIO $MODULE test PASS" -- 2.39.5

4 weeks

1
0
0 0

[PATCH AUTOSEL 6.6 2/3] selftests: gpio: gpio-sim: Fix missing chip disablements

by Sasha Levin

From: Koichiro Den <koichiro.den(a)canonical.com> [ Upstream commit f8524ac33cd452aef5384504b3264db6039a455e ] Since upstream commit 8bd76b3d3f3a ("gpio: sim: lock up configfs that an instantiated device depends on"), rmdir for an active virtual devices been prohibited. Update gpio-sim selftest to align with the change. Reported-by: kernel test robot <oliver.sang(a)intel.com> Closes: https://lore.kernel.org/oe-lkp/202501221006.a1ca5dfa-lkp@intel.com Signed-off-by: Koichiro Den <koichiro.den(a)canonical.com> Link: https://lore.kernel.org/r/20250122043309.304621-1-koichiro.den@canonical.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski(a)linaro.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/gpio/gpio-sim.sh | 31 +++++++++++++++++++----- 1 file changed, 25 insertions(+), 6 deletions(-) diff --git a/tools/testing/selftests/gpio/gpio-sim.sh b/tools/testing/selftests/gpio/gpio-sim.sh index 6fb66a687f173..bbc29ed9c60a9 100755 --- a/tools/testing/selftests/gpio/gpio-sim.sh +++ b/tools/testing/selftests/gpio/gpio-sim.sh @@ -46,12 +46,6 @@ remove_chip() { rmdir $CONFIGFS_DIR/$CHIP || fail "Unable to remove the chip" } -configfs_cleanup() { - for CHIP in `ls $CONFIGFS_DIR/`; do - remove_chip $CHIP - done -} - create_chip() { local CHIP=$1 @@ -105,6 +99,13 @@ disable_chip() { echo 0 > $CONFIGFS_DIR/$CHIP/live || fail "Unable to disable the chip" } +configfs_cleanup() { + for CHIP in `ls $CONFIGFS_DIR/`; do + disable_chip $CHIP + remove_chip $CHIP + done +} + configfs_chip_name() { local CHIP=$1 local BANK=$2 @@ -181,6 +182,7 @@ create_chip chip create_bank chip bank enable_chip chip test -n `cat $CONFIGFS_DIR/chip/bank/chip_name` || fail "chip_name doesn't work" +disable_chip chip remove_chip chip echo "1.2. chip_name returns 'none' if the chip is still pending" @@ -195,6 +197,7 @@ create_chip chip create_bank chip bank enable_chip chip test -n `cat $CONFIGFS_DIR/chip/dev_name` || fail "dev_name doesn't work" +disable_chip chip remove_chip chip echo "2. Creating and configuring simulated chips" @@ -204,6 +207,7 @@ create_chip chip create_bank chip bank enable_chip chip test "`get_chip_num_lines chip bank`" = "1" || fail "default number of lines is not 1" +disable_chip chip remove_chip chip echo "2.2. Number of lines can be specified" @@ -212,6 +216,7 @@ create_bank chip bank set_num_lines chip bank 16 enable_chip chip test "`get_chip_num_lines chip bank`" = "16" || fail "number of lines is not 16" +disable_chip chip remove_chip chip echo "2.3. Label can be set" @@ -220,6 +225,7 @@ create_bank chip bank set_label chip bank foobar enable_chip chip test "`get_chip_label chip bank`" = "foobar" || fail "label is incorrect" +disable_chip chip remove_chip chip echo "2.4. Label can be left empty" @@ -227,6 +233,7 @@ create_chip chip create_bank chip bank enable_chip chip test -z "`cat $CONFIGFS_DIR/chip/bank/label`" || fail "label is not empty" +disable_chip chip remove_chip chip echo "2.5. Line names can be configured" @@ -238,6 +245,7 @@ set_line_name chip bank 2 bar enable_chip chip test "`get_line_name chip bank 0`" = "foo" || fail "line name is incorrect" test "`get_line_name chip bank 2`" = "bar" || fail "line name is incorrect" +disable_chip chip remove_chip chip echo "2.6. Line config can remain unused if offset is greater than number of lines" @@ -248,6 +256,7 @@ set_line_name chip bank 5 foobar enable_chip chip test "`get_line_name chip bank 0`" = "" || fail "line name is incorrect" test "`get_line_name chip bank 1`" = "" || fail "line name is incorrect" +disable_chip chip remove_chip chip echo "2.7. Line configfs directory names are sanitized" @@ -267,6 +276,7 @@ for CHIP in $CHIPS; do enable_chip $CHIP done for CHIP in $CHIPS; do + disable_chip $CHIP remove_chip $CHIP done @@ -278,6 +288,7 @@ echo foobar > $CONFIGFS_DIR/chip/bank/label 2> /dev/null && \ fail "Setting label of a live chip should fail" echo 8 > $CONFIGFS_DIR/chip/bank/num_lines 2> /dev/null && \ fail "Setting number of lines of a live chip should fail" +disable_chip chip remove_chip chip echo "2.10. Can't create line items when chip is live" @@ -285,6 +296,7 @@ create_chip chip create_bank chip bank enable_chip chip mkdir $CONFIGFS_DIR/chip/bank/line0 2> /dev/null && fail "Creating line item should fail" +disable_chip chip remove_chip chip echo "2.11. Probe errors are propagated to user-space" @@ -316,6 +328,7 @@ mkdir -p $CONFIGFS_DIR/chip/bank/line4/hog enable_chip chip $BASE_DIR/gpio-mockup-cdev -s 1 /dev/`configfs_chip_name chip bank` 4 2> /dev/null && \ fail "Setting the value of a hogged line shouldn't succeed" +disable_chip chip remove_chip chip echo "3. Controlling simulated chips" @@ -331,6 +344,7 @@ test "$?" = "1" || fail "pull set incorrectly" sysfs_set_pull chip bank 0 pull-down $BASE_DIR/gpio-mockup-cdev /dev/`configfs_chip_name chip bank` 1 test "$?" = "0" || fail "pull set incorrectly" +disable_chip chip remove_chip chip echo "3.2. Pull can be read from sysfs" @@ -344,6 +358,7 @@ SYSFS_PATH=/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/pull test `cat $SYSFS_PATH` = "pull-down" || fail "reading the pull failed" sysfs_set_pull chip bank 0 pull-up test `cat $SYSFS_PATH` = "pull-up" || fail "reading the pull failed" +disable_chip chip remove_chip chip echo "3.3. Incorrect input in sysfs is rejected" @@ -355,6 +370,7 @@ DEVNAME=`configfs_dev_name chip` CHIPNAME=`configfs_chip_name chip bank` SYSFS_PATH="/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/pull" echo foobar > $SYSFS_PATH 2> /dev/null && fail "invalid input not detected" +disable_chip chip remove_chip chip echo "3.4. Can't write to value" @@ -365,6 +381,7 @@ DEVNAME=`configfs_dev_name chip` CHIPNAME=`configfs_chip_name chip bank` SYSFS_PATH="/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/value" echo 1 > $SYSFS_PATH 2> /dev/null && fail "writing to 'value' succeeded unexpectedly" +disable_chip chip remove_chip chip echo "4. Simulated GPIO chips are functional" @@ -382,6 +399,7 @@ $BASE_DIR/gpio-mockup-cdev -s 1 /dev/`configfs_chip_name chip bank` 0 & sleep 0.1 # FIXME Any better way? test `cat $SYSFS_PATH` = "1" || fail "incorrect value read from sysfs" kill $! +disable_chip chip remove_chip chip echo "4.2. Bias settings work correctly" @@ -394,6 +412,7 @@ CHIPNAME=`configfs_chip_name chip bank` SYSFS_PATH="/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/value" $BASE_DIR/gpio-mockup-cdev -b pull-up /dev/`configfs_chip_name chip bank` 0 test `cat $SYSFS_PATH` = "1" || fail "bias setting does not work" +disable_chip chip remove_chip chip echo "GPIO $MODULE test PASS" -- 2.39.5

4 weeks

1
0
0 0

[PATCH AUTOSEL 6.12 3/4] selftests: gpio: gpio-sim: Fix missing chip disablements

by Sasha Levin

From: Koichiro Den <koichiro.den(a)canonical.com> [ Upstream commit f8524ac33cd452aef5384504b3264db6039a455e ] Since upstream commit 8bd76b3d3f3a ("gpio: sim: lock up configfs that an instantiated device depends on"), rmdir for an active virtual devices been prohibited. Update gpio-sim selftest to align with the change. Reported-by: kernel test robot <oliver.sang(a)intel.com> Closes: https://lore.kernel.org/oe-lkp/202501221006.a1ca5dfa-lkp@intel.com Signed-off-by: Koichiro Den <koichiro.den(a)canonical.com> Link: https://lore.kernel.org/r/20250122043309.304621-1-koichiro.den@canonical.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski(a)linaro.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/gpio/gpio-sim.sh | 31 +++++++++++++++++++----- 1 file changed, 25 insertions(+), 6 deletions(-) diff --git a/tools/testing/selftests/gpio/gpio-sim.sh b/tools/testing/selftests/gpio/gpio-sim.sh index 6fb66a687f173..bbc29ed9c60a9 100755 --- a/tools/testing/selftests/gpio/gpio-sim.sh +++ b/tools/testing/selftests/gpio/gpio-sim.sh @@ -46,12 +46,6 @@ remove_chip() { rmdir $CONFIGFS_DIR/$CHIP || fail "Unable to remove the chip" } -configfs_cleanup() { - for CHIP in `ls $CONFIGFS_DIR/`; do - remove_chip $CHIP - done -} - create_chip() { local CHIP=$1 @@ -105,6 +99,13 @@ disable_chip() { echo 0 > $CONFIGFS_DIR/$CHIP/live || fail "Unable to disable the chip" } +configfs_cleanup() { + for CHIP in `ls $CONFIGFS_DIR/`; do + disable_chip $CHIP + remove_chip $CHIP + done +} + configfs_chip_name() { local CHIP=$1 local BANK=$2 @@ -181,6 +182,7 @@ create_chip chip create_bank chip bank enable_chip chip test -n `cat $CONFIGFS_DIR/chip/bank/chip_name` || fail "chip_name doesn't work" +disable_chip chip remove_chip chip echo "1.2. chip_name returns 'none' if the chip is still pending" @@ -195,6 +197,7 @@ create_chip chip create_bank chip bank enable_chip chip test -n `cat $CONFIGFS_DIR/chip/dev_name` || fail "dev_name doesn't work" +disable_chip chip remove_chip chip echo "2. Creating and configuring simulated chips" @@ -204,6 +207,7 @@ create_chip chip create_bank chip bank enable_chip chip test "`get_chip_num_lines chip bank`" = "1" || fail "default number of lines is not 1" +disable_chip chip remove_chip chip echo "2.2. Number of lines can be specified" @@ -212,6 +216,7 @@ create_bank chip bank set_num_lines chip bank 16 enable_chip chip test "`get_chip_num_lines chip bank`" = "16" || fail "number of lines is not 16" +disable_chip chip remove_chip chip echo "2.3. Label can be set" @@ -220,6 +225,7 @@ create_bank chip bank set_label chip bank foobar enable_chip chip test "`get_chip_label chip bank`" = "foobar" || fail "label is incorrect" +disable_chip chip remove_chip chip echo "2.4. Label can be left empty" @@ -227,6 +233,7 @@ create_chip chip create_bank chip bank enable_chip chip test -z "`cat $CONFIGFS_DIR/chip/bank/label`" || fail "label is not empty" +disable_chip chip remove_chip chip echo "2.5. Line names can be configured" @@ -238,6 +245,7 @@ set_line_name chip bank 2 bar enable_chip chip test "`get_line_name chip bank 0`" = "foo" || fail "line name is incorrect" test "`get_line_name chip bank 2`" = "bar" || fail "line name is incorrect" +disable_chip chip remove_chip chip echo "2.6. Line config can remain unused if offset is greater than number of lines" @@ -248,6 +256,7 @@ set_line_name chip bank 5 foobar enable_chip chip test "`get_line_name chip bank 0`" = "" || fail "line name is incorrect" test "`get_line_name chip bank 1`" = "" || fail "line name is incorrect" +disable_chip chip remove_chip chip echo "2.7. Line configfs directory names are sanitized" @@ -267,6 +276,7 @@ for CHIP in $CHIPS; do enable_chip $CHIP done for CHIP in $CHIPS; do + disable_chip $CHIP remove_chip $CHIP done @@ -278,6 +288,7 @@ echo foobar > $CONFIGFS_DIR/chip/bank/label 2> /dev/null && \ fail "Setting label of a live chip should fail" echo 8 > $CONFIGFS_DIR/chip/bank/num_lines 2> /dev/null && \ fail "Setting number of lines of a live chip should fail" +disable_chip chip remove_chip chip echo "2.10. Can't create line items when chip is live" @@ -285,6 +296,7 @@ create_chip chip create_bank chip bank enable_chip chip mkdir $CONFIGFS_DIR/chip/bank/line0 2> /dev/null && fail "Creating line item should fail" +disable_chip chip remove_chip chip echo "2.11. Probe errors are propagated to user-space" @@ -316,6 +328,7 @@ mkdir -p $CONFIGFS_DIR/chip/bank/line4/hog enable_chip chip $BASE_DIR/gpio-mockup-cdev -s 1 /dev/`configfs_chip_name chip bank` 4 2> /dev/null && \ fail "Setting the value of a hogged line shouldn't succeed" +disable_chip chip remove_chip chip echo "3. Controlling simulated chips" @@ -331,6 +344,7 @@ test "$?" = "1" || fail "pull set incorrectly" sysfs_set_pull chip bank 0 pull-down $BASE_DIR/gpio-mockup-cdev /dev/`configfs_chip_name chip bank` 1 test "$?" = "0" || fail "pull set incorrectly" +disable_chip chip remove_chip chip echo "3.2. Pull can be read from sysfs" @@ -344,6 +358,7 @@ SYSFS_PATH=/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/pull test `cat $SYSFS_PATH` = "pull-down" || fail "reading the pull failed" sysfs_set_pull chip bank 0 pull-up test `cat $SYSFS_PATH` = "pull-up" || fail "reading the pull failed" +disable_chip chip remove_chip chip echo "3.3. Incorrect input in sysfs is rejected" @@ -355,6 +370,7 @@ DEVNAME=`configfs_dev_name chip` CHIPNAME=`configfs_chip_name chip bank` SYSFS_PATH="/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/pull" echo foobar > $SYSFS_PATH 2> /dev/null && fail "invalid input not detected" +disable_chip chip remove_chip chip echo "3.4. Can't write to value" @@ -365,6 +381,7 @@ DEVNAME=`configfs_dev_name chip` CHIPNAME=`configfs_chip_name chip bank` SYSFS_PATH="/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/value" echo 1 > $SYSFS_PATH 2> /dev/null && fail "writing to 'value' succeeded unexpectedly" +disable_chip chip remove_chip chip echo "4. Simulated GPIO chips are functional" @@ -382,6 +399,7 @@ $BASE_DIR/gpio-mockup-cdev -s 1 /dev/`configfs_chip_name chip bank` 0 & sleep 0.1 # FIXME Any better way? test `cat $SYSFS_PATH` = "1" || fail "incorrect value read from sysfs" kill $! +disable_chip chip remove_chip chip echo "4.2. Bias settings work correctly" @@ -394,6 +412,7 @@ CHIPNAME=`configfs_chip_name chip bank` SYSFS_PATH="/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/value" $BASE_DIR/gpio-mockup-cdev -b pull-up /dev/`configfs_chip_name chip bank` 0 test `cat $SYSFS_PATH` = "1" || fail "bias setting does not work" +disable_chip chip remove_chip chip echo "GPIO $MODULE test PASS" -- 2.39.5

4 weeks

1
0
0 0

[PATCH AUTOSEL 6.13 4/5] selftests: gpio: gpio-sim: Fix missing chip disablements

by Sasha Levin

From: Koichiro Den <koichiro.den(a)canonical.com> [ Upstream commit f8524ac33cd452aef5384504b3264db6039a455e ] Since upstream commit 8bd76b3d3f3a ("gpio: sim: lock up configfs that an instantiated device depends on"), rmdir for an active virtual devices been prohibited. Update gpio-sim selftest to align with the change. Reported-by: kernel test robot <oliver.sang(a)intel.com> Closes: https://lore.kernel.org/oe-lkp/202501221006.a1ca5dfa-lkp@intel.com Signed-off-by: Koichiro Den <koichiro.den(a)canonical.com> Link: https://lore.kernel.org/r/20250122043309.304621-1-koichiro.den@canonical.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski(a)linaro.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/gpio/gpio-sim.sh | 31 +++++++++++++++++++----- 1 file changed, 25 insertions(+), 6 deletions(-) diff --git a/tools/testing/selftests/gpio/gpio-sim.sh b/tools/testing/selftests/gpio/gpio-sim.sh index 6fb66a687f173..bbc29ed9c60a9 100755 --- a/tools/testing/selftests/gpio/gpio-sim.sh +++ b/tools/testing/selftests/gpio/gpio-sim.sh @@ -46,12 +46,6 @@ remove_chip() { rmdir $CONFIGFS_DIR/$CHIP || fail "Unable to remove the chip" } -configfs_cleanup() { - for CHIP in `ls $CONFIGFS_DIR/`; do - remove_chip $CHIP - done -} - create_chip() { local CHIP=$1 @@ -105,6 +99,13 @@ disable_chip() { echo 0 > $CONFIGFS_DIR/$CHIP/live || fail "Unable to disable the chip" } +configfs_cleanup() { + for CHIP in `ls $CONFIGFS_DIR/`; do + disable_chip $CHIP + remove_chip $CHIP + done +} + configfs_chip_name() { local CHIP=$1 local BANK=$2 @@ -181,6 +182,7 @@ create_chip chip create_bank chip bank enable_chip chip test -n `cat $CONFIGFS_DIR/chip/bank/chip_name` || fail "chip_name doesn't work" +disable_chip chip remove_chip chip echo "1.2. chip_name returns 'none' if the chip is still pending" @@ -195,6 +197,7 @@ create_chip chip create_bank chip bank enable_chip chip test -n `cat $CONFIGFS_DIR/chip/dev_name` || fail "dev_name doesn't work" +disable_chip chip remove_chip chip echo "2. Creating and configuring simulated chips" @@ -204,6 +207,7 @@ create_chip chip create_bank chip bank enable_chip chip test "`get_chip_num_lines chip bank`" = "1" || fail "default number of lines is not 1" +disable_chip chip remove_chip chip echo "2.2. Number of lines can be specified" @@ -212,6 +216,7 @@ create_bank chip bank set_num_lines chip bank 16 enable_chip chip test "`get_chip_num_lines chip bank`" = "16" || fail "number of lines is not 16" +disable_chip chip remove_chip chip echo "2.3. Label can be set" @@ -220,6 +225,7 @@ create_bank chip bank set_label chip bank foobar enable_chip chip test "`get_chip_label chip bank`" = "foobar" || fail "label is incorrect" +disable_chip chip remove_chip chip echo "2.4. Label can be left empty" @@ -227,6 +233,7 @@ create_chip chip create_bank chip bank enable_chip chip test -z "`cat $CONFIGFS_DIR/chip/bank/label`" || fail "label is not empty" +disable_chip chip remove_chip chip echo "2.5. Line names can be configured" @@ -238,6 +245,7 @@ set_line_name chip bank 2 bar enable_chip chip test "`get_line_name chip bank 0`" = "foo" || fail "line name is incorrect" test "`get_line_name chip bank 2`" = "bar" || fail "line name is incorrect" +disable_chip chip remove_chip chip echo "2.6. Line config can remain unused if offset is greater than number of lines" @@ -248,6 +256,7 @@ set_line_name chip bank 5 foobar enable_chip chip test "`get_line_name chip bank 0`" = "" || fail "line name is incorrect" test "`get_line_name chip bank 1`" = "" || fail "line name is incorrect" +disable_chip chip remove_chip chip echo "2.7. Line configfs directory names are sanitized" @@ -267,6 +276,7 @@ for CHIP in $CHIPS; do enable_chip $CHIP done for CHIP in $CHIPS; do + disable_chip $CHIP remove_chip $CHIP done @@ -278,6 +288,7 @@ echo foobar > $CONFIGFS_DIR/chip/bank/label 2> /dev/null && \ fail "Setting label of a live chip should fail" echo 8 > $CONFIGFS_DIR/chip/bank/num_lines 2> /dev/null && \ fail "Setting number of lines of a live chip should fail" +disable_chip chip remove_chip chip echo "2.10. Can't create line items when chip is live" @@ -285,6 +296,7 @@ create_chip chip create_bank chip bank enable_chip chip mkdir $CONFIGFS_DIR/chip/bank/line0 2> /dev/null && fail "Creating line item should fail" +disable_chip chip remove_chip chip echo "2.11. Probe errors are propagated to user-space" @@ -316,6 +328,7 @@ mkdir -p $CONFIGFS_DIR/chip/bank/line4/hog enable_chip chip $BASE_DIR/gpio-mockup-cdev -s 1 /dev/`configfs_chip_name chip bank` 4 2> /dev/null && \ fail "Setting the value of a hogged line shouldn't succeed" +disable_chip chip remove_chip chip echo "3. Controlling simulated chips" @@ -331,6 +344,7 @@ test "$?" = "1" || fail "pull set incorrectly" sysfs_set_pull chip bank 0 pull-down $BASE_DIR/gpio-mockup-cdev /dev/`configfs_chip_name chip bank` 1 test "$?" = "0" || fail "pull set incorrectly" +disable_chip chip remove_chip chip echo "3.2. Pull can be read from sysfs" @@ -344,6 +358,7 @@ SYSFS_PATH=/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/pull test `cat $SYSFS_PATH` = "pull-down" || fail "reading the pull failed" sysfs_set_pull chip bank 0 pull-up test `cat $SYSFS_PATH` = "pull-up" || fail "reading the pull failed" +disable_chip chip remove_chip chip echo "3.3. Incorrect input in sysfs is rejected" @@ -355,6 +370,7 @@ DEVNAME=`configfs_dev_name chip` CHIPNAME=`configfs_chip_name chip bank` SYSFS_PATH="/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/pull" echo foobar > $SYSFS_PATH 2> /dev/null && fail "invalid input not detected" +disable_chip chip remove_chip chip echo "3.4. Can't write to value" @@ -365,6 +381,7 @@ DEVNAME=`configfs_dev_name chip` CHIPNAME=`configfs_chip_name chip bank` SYSFS_PATH="/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/value" echo 1 > $SYSFS_PATH 2> /dev/null && fail "writing to 'value' succeeded unexpectedly" +disable_chip chip remove_chip chip echo "4. Simulated GPIO chips are functional" @@ -382,6 +399,7 @@ $BASE_DIR/gpio-mockup-cdev -s 1 /dev/`configfs_chip_name chip bank` 0 & sleep 0.1 # FIXME Any better way? test `cat $SYSFS_PATH` = "1" || fail "incorrect value read from sysfs" kill $! +disable_chip chip remove_chip chip echo "4.2. Bias settings work correctly" @@ -394,6 +412,7 @@ CHIPNAME=`configfs_chip_name chip bank` SYSFS_PATH="/sys/devices/platform/$DEVNAME/$CHIPNAME/sim_gpio0/value" $BASE_DIR/gpio-mockup-cdev -b pull-up /dev/`configfs_chip_name chip bank` 0 test `cat $SYSFS_PATH` = "1" || fail "bias setting does not work" +disable_chip chip remove_chip chip echo "GPIO $MODULE test PASS" -- 2.39.5

4 weeks

1
0
0 0

[RFC PATCH 0/4] PMU partitioning driver support

by Colton Lewis

This series introduces support in the ARM PMUv3 driver for partitioning PMU counters into two separate ranges by taking advantage of the MDCR_EL2.HPMN register field. The advantage of a partitioned PMU would be to allow KVM guests direct access to a subset of PMU functionality, greatly reducing the overhead of performance monitoring in guests. While this series could be accepted on its own merits, practically there is a lot more to be done before it will be fully useful, so I'm sending as an RFC for now. This patch is based on v6.13-rc7. It needs a small additional change after Oliver's Debug cleanups series going into 6.14, specifically this patch [1], because it changes kvm_arm_setup_mdcr_el2() to initialize HPMN from a cached value read early in the boot process instead of reading from the register. The only sensible way I can see to deal with this is returning to reading the register. [1] https://lore.kernel.org/kvmarm/20241219224116.3941496-3-oliver.upton@linux.… Colton Lewis (4): perf: arm_pmuv3: Introduce module param to partition the PMU KVM: arm64: Make guests see only counters they can access perf: arm_pmuv3: Generalize counter bitmasks perf: arm_pmuv3: Keep out of guest counter partition arch/arm/include/asm/arm_pmuv3.h | 10 ++ arch/arm64/include/asm/arm_pmuv3.h | 10 ++ arch/arm64/kvm/pmu-emul.c | 8 +- drivers/perf/arm_pmuv3.c | 113 ++++++++++++++++-- include/linux/perf/arm_pmu.h | 2 + include/linux/perf/arm_pmuv3.h | 34 +++++- .../kvm/aarch64/vpmu_counter_access.c | 2 +- 7 files changed, 160 insertions(+), 19 deletions(-) base-commit: 5bc55a333a2f7316b58edc7573e8e893f7acb532 -- 2.48.1.262.g85cc9f2d1e-goog

4 weeks

4
14
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror February 2025