November 2025 - Linux-kselftest-mirror

[PATCH net-next v12 00/12] vsock: add namespace support to vhost-vsock and loopback

by Bobby Eshleman

This series adds namespace support to vhost-vsock and loopback. It does not add namespaces to any of the other guest transports (virtio-vsock, hyperv, or vmci). The current revision supports two modes: local and global. Local mode is complete isolation of namespaces, while global mode is complete sharing between namespaces of CIDs (the original behavior). The mode is set using /proc/sys/net/vsock/ns_mode. Modes are per-netns and write-once. This allows a system to configure namespaces independently (some may share CIDs, others are completely isolated). This also supports future possible mixed use cases, where there may be namespaces in global mode spinning up VMs while there are mixed mode namespaces that provide services to the VMs, but are not allowed to allocate from the global CID pool (this mode is not implemented in this series). If a socket or VM is created when a namespace is global but the namespace changes to local, the socket or VM will continue working normally. That is, the socket or VM assumes the mode behavior of the namespace at the time the socket/VM was created. The original mode is captured in vsock_create() and so occurs at the time of socket(2) and accept(2) for sockets and open(2) on /dev/vhost-vsock for VMs. This prevents a socket/VM connection from suddenly breaking due to a namespace mode change. Any new sockets/VMs created after the mode change will adopt the new mode's behavior. Additionally, added tests for the new namespace features: tools/testing/selftests/vsock/vmtest.sh 1..28 ok 1 vm_server_host_client ok 2 vm_client_host_server ok 3 vm_loopback ok 4 ns_host_vsock_ns_mode_ok ok 5 ns_host_vsock_ns_mode_write_once_ok ok 6 ns_global_same_cid_fails ok 7 ns_local_same_cid_ok ok 8 ns_global_local_same_cid_ok ok 9 ns_local_global_same_cid_ok ok 10 ns_diff_global_host_connect_to_global_vm_ok ok 11 ns_diff_global_host_connect_to_local_vm_fails ok 12 ns_diff_global_vm_connect_to_global_host_ok ok 13 ns_diff_global_vm_connect_to_local_host_fails ok 14 ns_diff_local_host_connect_to_local_vm_fails ok 15 ns_diff_local_vm_connect_to_local_host_fails ok 16 ns_diff_global_to_local_loopback_local_fails ok 17 ns_diff_local_to_global_loopback_fails ok 18 ns_diff_local_to_local_loopback_fails ok 19 ns_diff_global_to_global_loopback_ok ok 20 ns_same_local_loopback_ok ok 21 ns_same_local_host_connect_to_local_vm_ok ok 22 ns_same_local_vm_connect_to_local_host_ok ok 23 ns_mode_change_connection_continue_vm_ok ok 24 ns_mode_change_connection_continue_host_ok ok 25 ns_mode_change_connection_continue_both_ok ok 26 ns_delete_vm_ok ok 27 ns_delete_host_ok ok 28 ns_delete_both_ok SUMMARY: PASS=28 SKIP=0 FAIL=0 Dependent on series: https://lore.kernel.org/all/20251108-vsock-selftests-fixes-and-improvements… Thanks again for everyone's help and reviews! Suggested-by: Sargun Dhillon <sargun(a)sargun.me> Signed-off-by: Bobby Eshleman <bobbyeshleman(a)gmail.com> Changes in v12: - add ns mode checking to _allow() callbacks to reject local mode for incompatible transports (Stefano) - flip vhost/loopback to return true for stream_allow() and seqpacket_allow() in "vsock: add netns support to virtio transports" (Stefano) - add VMADDR_CID_ANY + local mode documentation in af_vsock.c (Stefano) - change "selftests/vsock: add tests for host <-> vm connectivity with namespaces" to skip test 29 in vsock_test for namespace local vsock_test calls in a host local-mode namespace. There is a false-positive edge case for that test encountered with the ->stream_allow() approach. More details in that patch. - updated cover letter with new test output - Link to v11: https://lore.kernel.org/r/20251120-vsock-vmtest-v11-0-55cbc80249a7@meta.com Changes in v11: - vmtest: add a patch to use ss in wait_for_listener functions and support vsock, tcp, and unix. Change all patches to use the new functions. - vmtest: add a patch to re-use vm dmesg / warn counting functions - Link to v10: https://lore.kernel.org/r/20251117-vsock-vmtest-v10-0-df08f165bf3e@meta.com Changes in v10: - Combine virtio common patches into one (Stefano) - Resolve vsock_loopback virtio_transport_reset_no_sock() issue with info->vsk setting. This eliminates the need for skb->cb, so remove skb->cb patches. - many line width 80 fixes - Link to v9: https://lore.kernel.org/all/20251111-vsock-vmtest-v9-0-852787a37bed@meta.com Changes in v9: - reorder loopback patch after patch for virtio transport common code - remove module ordering tests patch because loopback no longer depends on pernet ops - major simplifications in vsock_loopback - added a new patch for blocking local mode for guests, added test case to check - add net ref tracking to vsock_loopback patch - Link to v8: https://lore.kernel.org/r/20251023-vsock-vmtest-v8-0-dea984d02bb0@meta.com Changes in v8: - Break generic cleanup/refactoring patches into standalone series, remove those from this series - Link to dependency: https://lore.kernel.org/all/20251022-vsock-selftests-fixes-and-improvements… - Link to v7: https://lore.kernel.org/r/20251021-vsock-vmtest-v7-0-0661b7b6f081@meta.com Changes in v7: - fix hv_sock build - break out vmtest patches into distinct, more well-scoped patches - change `orig_net_mode` to `net_mode` - many fixes and style changes in per-patch change sets (see individual patches for specific changes) - optimize `virtio_vsock_skb_cb` layout - update commit messages with more useful descriptions - vsock_loopback: use orig_net_mode instead of current net mode - add tests for edge cases (ns deletion, mode changing, loopback module load ordering) - Link to v6: https://lore.kernel.org/r/20250916-vsock-vmtest-v6-0-064d2eb0c89d@meta.com Changes in v6: - define behavior when mode changes to local while socket/VM is alive - af_vsock: clarify description of CID behavior - af_vsock: use stronger langauge around CID rules (dont use "may") - af_vsock: improve naming of buf/buffer - af_vsock: improve string length checking on proc writes - vsock_loopback: add space in struct to clarify lock protection - vsock_loopback: do proper cleanup/unregister on vsock_loopback_exit() - vsock_loopback: use virtio_vsock_skb_net() instead of sock_net() - vsock_loopback: set loopback to NULL after kfree() - vsock_loopback: use pernet_operations and remove callback mechanism - vsock_loopback: add macros for "global" and "local" - vsock_loopback: fix length checking - vmtest.sh: check for namespace support in vmtest.sh - Link to v5: https://lore.kernel.org/r/20250827-vsock-vmtest-v5-0-0ba580bede5b@meta.com Changes in v5: - /proc/net/vsock_ns_mode -> /proc/sys/net/vsock/ns_mode - vsock_global_net -> vsock_global_dummy_net - fix netns lookup in vhost_vsock to respect pid namespaces - add callbacks for vsock_loopback to avoid circular dependency - vmtest.sh loads vsock_loopback module - remove vsock_net_mode_can_set() - change vsock_net_write_mode() to return true/false based on success - make vsock_net_mode enum instead of u8 - Link to v4: https://lore.kernel.org/r/20250805-vsock-vmtest-v4-0-059ec51ab111@meta.com Changes in v4: - removed RFC tag - implemented loopback support - renamed new tests to better reflect behavior - completed suite of tests with permutations of ns modes and vsock_test as guest/host - simplified socat bridging with unix socket instead of tcp + veth - only use vsock_test for success case, socat for failure case (context in commit message) - lots of cleanup Changes in v3: - add notion of "modes" - add procfs /proc/net/vsock_ns_mode - local and global modes only - no /dev/vhost-vsock-netns - vmtest.sh already merged, so new patch just adds new tests for NS - Link to v2: https://lore.kernel.org/kvm/20250312-vsock-netns-v2-0-84bffa1aa97a@gmail.com Changes in v2: - only support vhost-vsock namespaces - all g2h namespaces retain old behavior, only common API changes impacted by vhost-vsock changes - add /dev/vhost-vsock-netns for "opt-in" - leave /dev/vhost-vsock to old behavior - removed netns module param - Link to v1: https://lore.kernel.org/r/20200116172428.311437-1-sgarzare@redhat.com Changes in v1: - added 'netns' module param to vsock.ko to enable the network namespace support (disabled by default) - added 'vsock_net_eq()' to check the "net" assigned to a socket only when 'netns' support is enabled - Link to RFC: https://patchwork.ozlabs.org/cover/1202235/ --- Bobby Eshleman (12): vsock: a per-net vsock NS mode state vsock: add netns to vsock core virtio: set skb owner of virtio_transport_reset_no_sock() reply vsock: add netns support to virtio transports selftests/vsock: add namespace helpers to vmtest.sh selftests/vsock: prepare vm management helpers for namespaces selftests/vsock: add vm_dmesg_{warn,oops}_count() helpers selftests/vsock: use ss to wait for listeners instead of /proc/net selftests/vsock: add tests for proc sys vsock ns_mode selftests/vsock: add namespace tests for CID collisions selftests/vsock: add tests for host <-> vm connectivity with namespaces selftests/vsock: add tests for namespace deletion and mode changes MAINTAINERS | 1 + drivers/vhost/vsock.c | 59 +- include/linux/virtio_vsock.h | 12 +- include/net/af_vsock.h | 57 +- include/net/net_namespace.h | 4 + include/net/netns/vsock.h | 17 + net/vmw_vsock/af_vsock.c | 272 +++++++- net/vmw_vsock/hyperv_transport.c | 7 +- net/vmw_vsock/virtio_transport.c | 19 +- net/vmw_vsock/virtio_transport_common.c | 75 ++- net/vmw_vsock/vmci_transport.c | 26 +- net/vmw_vsock/vsock_loopback.c | 23 +- tools/testing/selftests/vsock/vmtest.sh | 1077 +++++++++++++++++++++++++++++-- 13 files changed, 1522 insertions(+), 127 deletions(-) --- base-commit: 962ac5ca99a5c3e7469215bf47572440402dfd59 change-id: 20250325-vsock-vmtest-b3a21d2102c2 prerequisite-message-id: <20251022-vsock-selftests-fixes-and-improvements-v1-0-edeb179d6463(a)meta.com> prerequisite-patch-id: a2eecc3851f2509ed40009a7cab6990c6d7cfff5 prerequisite-patch-id: 501db2100636b9c8fcb3b64b8b1df797ccbede85 prerequisite-patch-id: ba1a2f07398a035bc48ef72edda41888614be449 prerequisite-patch-id: fd5cc5445aca9355ce678e6d2bfa89fab8a57e61 prerequisite-patch-id: 795ab4432ffb0843e22b580374782e7e0d99b909 prerequisite-patch-id: 1499d263dc933e75366c09e045d2125ca39f7ddd prerequisite-patch-id: f92d99bb1d35d99b063f818a19dcda999152d74c prerequisite-patch-id: e3296f38cdba6d903e061cff2bbb3e7615e8e671 prerequisite-patch-id: bc4662b4710d302d4893f58708820fc2a0624325 prerequisite-patch-id: f8991f2e98c2661a706183fde6b35e2b8d9aedcf prerequisite-patch-id: 44bf9ed69353586d284e5ee63d6fffa30439a698 prerequisite-patch-id: d50621bc630eeaf608bbaf260370c8dabf6326df Best regards, -- Bobby Eshleman <bobbyeshleman(a)meta.com>

1 week, 1 day

3
23
0 0

[PATCH v4 0/3] selftests: cgroup: Enhance robustness with polling helpers

by Guopeng Zhang

Hi all, This patch series introduces improvements to the cgroup selftests by adding helper functions to better handle asynchronous updates in cgroup statistics. These changes are especially useful for managing cgroup stats like memory.stat and cgroup.stat, which can be affected by delays (e.g., RCPU callbacks and asynchronous rstat flushing). v4: - Patch 1/3: Adds the `cg_read_key_long_poll()` helper to poll cgroup keys with retries and configurable intervals. - Patch 2/3: Updates `test_memcg_sock()` to use `cg_read_key_long_poll()` for handling delayed "sock" counter updates in memory.stat. - Patch 3/3: Replaces `sleep` and retry logic in `test_kmem_dead_cgroups()` with `cg_read_key_long_poll()` for waiting on `nr_dying_descendants`. v3: - Move `MEMCG_SOCKSTAT_WAIT_*` defines after the `#include` block as suggested. v2: - Clarify the rationale for the 3s timeout and mention the periodic rstat flush interval (FLUSH_TIME = 2*HZ) in the comment. - Replace hardcoded retry count and wait interval with macros to avoid magic numbers and make the timeout calculation explicit. Thanks to Michal Koutný for the suggestion to introduce the polling helper, and to Lance Yang for the review. Guopeng Zhang (3): selftests: cgroup: Add cg_read_key_long_poll() to poll a cgroup key with retries selftests: cgroup: make test_memcg_sock robust against delayed sock stats selftests: cgroup: Replace sleep with cg_read_key_long_poll() for waiting on nr_dying_descendants .../selftests/cgroup/lib/cgroup_util.c | 21 +++++++++++++ .../cgroup/lib/include/cgroup_util.h | 5 +++ tools/testing/selftests/cgroup/test_kmem.c | 31 ++++++++----------- .../selftests/cgroup/test_memcontrol.c | 20 +++++++++++- 4 files changed, 58 insertions(+), 19 deletions(-) -- 2.25.1

1 week, 2 days

4
12
0 0

[PATCH] KVM: selftests: Fix core dump in rseq_test

by Gavin Shan

In commit 0297cdc12a87 ("KVM: selftests: Add option to rseq test to override /dev/cpu_dma_latency"), a 'break' is missed before the option 'l' in the argument parsing loop, which leads to an unexpected core dump in atoi_paranoid(). It tries to get the latency from non-existent argument. host$ ./rseq_test -u Random seed: 0x6b8b4567 Segmentation fault (core dumped) Add a 'break' before the option 'l' in the argument parsing loop to avoid the unexpected core dump. Fixes: 0297cdc12a87 ("KVM: selftests: Add option to rseq test to override /dev/cpu_dma_latency") Cc: stable(a)vger.kernel.org # v6.15+ Signed-off-by: Gavin Shan <gshan(a)redhat.com> --- tools/testing/selftests/kvm/rseq_test.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/kvm/rseq_test.c b/tools/testing/selftests/kvm/rseq_test.c index 1375fca80bcdb..f80ad6b47d16b 100644 --- a/tools/testing/selftests/kvm/rseq_test.c +++ b/tools/testing/selftests/kvm/rseq_test.c @@ -215,6 +215,7 @@ int main(int argc, char *argv[]) switch (opt) { case 'u': skip_sanity_check = true; + break; case 'l': latency = atoi_paranoid(optarg); break; -- 2.51.1

1 week, 2 days

2
2
0 0

[RFC net-next 00/13] ovpn: new features + kselftests

by Antonio Quartulli

Dear all, This patchset is just a respin of my latest PR to net-next, including all modifications requested by Jakub and Sabrina. However, this time I am also adding patches targeting selftest/net/ovpn, as they come in handy for testing the new features (originally I wanted them to be a separate PR, but it doesn't indeed make a lot of sense). This said, since these kselftest patches are quite invasive, I didn't feel confident with sending them in a PR right away, but I rather wanted some feedback from Sabrina and Shuah first, if possible. So here we go. Once I get some approval on this batch, I'll send then send them all to net-next again as PRv2. Thanks a lot! Regards, Antonio Quartulli (1): selftests: ovpn: allow compiling ovpn-cli.c with mbedtls3 Qingfang Deng (1): ovpn: pktid: use bitops.h API Ralf Lici (10): selftests: ovpn: add notification parsing and matching ovpn: notify userspace on client float event ovpn: add support for asymmetric peer IDs selftests: ovpn: check asymmetric peer-id selftests: ovpn: add test for the FW mark feature ovpn: consolidate crypto allocations in one chunk ovpn: use bound device in UDP when available selftests: ovpn: add test for bound device ovpn: use bound address in UDP when available selftests: ovpn: add test for bound address Sabrina Dubroca (1): ovpn: use correct array size to parse nested attributes in ovpn_nl_key_swap_doit Documentation/netlink/specs/ovpn.yaml | 23 +- drivers/net/ovpn/crypto_aead.c | 162 +++++++--- drivers/net/ovpn/io.c | 8 +- drivers/net/ovpn/netlink-gen.c | 13 +- drivers/net/ovpn/netlink-gen.h | 6 +- drivers/net/ovpn/netlink.c | 98 +++++- drivers/net/ovpn/netlink.h | 2 + drivers/net/ovpn/peer.c | 6 + drivers/net/ovpn/peer.h | 4 +- drivers/net/ovpn/pktid.c | 11 +- drivers/net/ovpn/pktid.h | 2 +- drivers/net/ovpn/skb.h | 13 +- drivers/net/ovpn/udp.c | 10 +- include/uapi/linux/ovpn.h | 2 + tools/testing/selftests/net/ovpn/Makefile | 17 +- .../selftests/net/ovpn/check_requirements.py | 37 +++ tools/testing/selftests/net/ovpn/common.sh | 60 +++- tools/testing/selftests/net/ovpn/data64.key | 6 +- .../selftests/net/ovpn/json/peer0-float.json | 9 + .../selftests/net/ovpn/json/peer0.json | 6 + .../selftests/net/ovpn/json/peer1-float.json | 1 + .../selftests/net/ovpn/json/peer1.json | 1 + .../selftests/net/ovpn/json/peer2-float.json | 1 + .../selftests/net/ovpn/json/peer2.json | 1 + .../selftests/net/ovpn/json/peer3-float.json | 1 + .../selftests/net/ovpn/json/peer3.json | 1 + .../selftests/net/ovpn/json/peer4-float.json | 1 + .../selftests/net/ovpn/json/peer4.json | 1 + .../selftests/net/ovpn/json/peer5-float.json | 1 + .../selftests/net/ovpn/json/peer5.json | 1 + .../selftests/net/ovpn/json/peer6-float.json | 1 + .../selftests/net/ovpn/json/peer6.json | 1 + tools/testing/selftests/net/ovpn/ovpn-cli.c | 281 +++++++++++------- .../selftests/net/ovpn/requirements.txt | 1 + .../testing/selftests/net/ovpn/tcp_peers.txt | 11 +- .../selftests/net/ovpn/test-bind-addr.sh | 10 + tools/testing/selftests/net/ovpn/test-bind.sh | 117 ++++++++ .../selftests/net/ovpn/test-close-socket.sh | 2 +- tools/testing/selftests/net/ovpn/test-mark.sh | 81 +++++ tools/testing/selftests/net/ovpn/test.sh | 57 +++- .../testing/selftests/net/ovpn/udp_peers.txt | 12 +- 41 files changed, 855 insertions(+), 224 deletions(-) create mode 100755 tools/testing/selftests/net/ovpn/check_requirements.py create mode 100644 tools/testing/selftests/net/ovpn/json/peer0-float.json create mode 100644 tools/testing/selftests/net/ovpn/json/peer0.json create mode 120000 tools/testing/selftests/net/ovpn/json/peer1-float.json create mode 100644 tools/testing/selftests/net/ovpn/json/peer1.json create mode 120000 tools/testing/selftests/net/ovpn/json/peer2-float.json create mode 100644 tools/testing/selftests/net/ovpn/json/peer2.json create mode 120000 tools/testing/selftests/net/ovpn/json/peer3-float.json create mode 100644 tools/testing/selftests/net/ovpn/json/peer3.json create mode 120000 tools/testing/selftests/net/ovpn/json/peer4-float.json create mode 100644 tools/testing/selftests/net/ovpn/json/peer4.json create mode 120000 tools/testing/selftests/net/ovpn/json/peer5-float.json create mode 100644 tools/testing/selftests/net/ovpn/json/peer5.json create mode 120000 tools/testing/selftests/net/ovpn/json/peer6-float.json create mode 100644 tools/testing/selftests/net/ovpn/json/peer6.json create mode 120000 tools/testing/selftests/net/ovpn/requirements.txt create mode 100755 tools/testing/selftests/net/ovpn/test-bind-addr.sh create mode 100755 tools/testing/selftests/net/ovpn/test-bind.sh create mode 100755 tools/testing/selftests/net/ovpn/test-mark.sh -- 2.51.2

1 week, 2 days

3
24
0 0

[PATCH net-next v8 0/5] netconsole: support automatic target recovery

by Andre Carvalho

This patchset introduces target resume capability to netconsole allowing it to recover targets when underlying low-level interface comes back online. The patchset starts by refactoring netconsole state representation in order to allow representing deactivated targets (targets that are disabled due to interfaces unregister). It then modifies netconsole to handle NETDEV_REGISTER events for such targets, setups netpoll and forces the device UP. Targets are matched with incoming interfaces depending on how they were bound in netconsole (by mac or interface name). For these reasons, we also attempt resuming on NETDEV_CHANGENAME. The patchset includes a selftest that validates netconsole target state transitions and that target is functional after resumed. Signed-off-by: Andre Carvalho <asantostc(a)gmail.com> --- Changes in v8: - Handle NETDEV_REGISTER/CHANGENAME instead of NETDEV_UP (and force the device UP), to increase the chances of succesfully resuming a target. This requires using a workqueue instead of inline in the event notifier as we can't UP the device otherwise. - Link to v7: https://lore.kernel.org/r/20251126-netcons-retrigger-v7-0-1d86dba83b1c@gmai… Changes in v7: - selftest: use ${EXIT_STATUS} instead of ${ksft_pass} to avoid shellcheck warning - Link to v6: https://lore.kernel.org/r/20251121-netcons-retrigger-v6-0-9c03f5a2bd6f@gmai… Changes in v6: - Rebase on top of net-next to resolve conflicts, no functional changes. - Link to v5: https://lore.kernel.org/r/20251119-netcons-retrigger-v5-0-2c7dda6055d6@gmai… Changes in v5: - patch 3: Set (de)enslaved target as DISABLED instead of DEACTIVATED to prevent resuming it. - selftest: Fix test cleanup by moving trap line to outside of loop and remove unneeded 'local' keyword - Rename maybe_resume_target to resume_target, add netconsole_ prefix to process_resumable_targets. - Hold device reference before calling __netpoll_setup. - Link to v4: https://lore.kernel.org/r/20251116-netcons-retrigger-v4-0-5290b5f140c2@gmai… Changes in v4: - Simplify selftest cleanup, removing trap setup in loop. - Drop netpoll helper (__setup_netpoll_hold) and manage reference inside netconsole. - Move resume_list processing logic to separate function. - Link to v3: https://lore.kernel.org/r/20251109-netcons-retrigger-v3-0-1654c280bbe6@gmai… Changes in v3: - Resume by mac or interface name depending on how target was created. - Attempt to resume target without holding target list lock, by moving the target to a temporary list. This is required as netpoll may attempt to allocate memory. - Link to v2: https://lore.kernel.org/r/20250921-netcons-retrigger-v2-0-a0e84006237f@gmai… Changes in v2: - Attempt to resume target in the same thread, instead of using workqueue . - Add wrapper around __netpoll_setup (patch 4). - Renamed resume_target to maybe_resume_target and moved conditionals to inside its implementation, keeping code more clear. - Verify that device addr matches target mac address when target was setup using mac. - Update selftest to cover targets bound by mac and interface name. - Fix typo in selftest comment and sort tests alphabetically in Makefile. - Link to v1: https://lore.kernel.org/r/20250909-netcons-retrigger-v1-0-3aea904926cf@gmai… --- Andre Carvalho (3): netconsole: convert 'enabled' flag to enum for clearer state management netconsole: resume previously deactivated target selftests: netconsole: validate target resume Breno Leitao (2): netconsole: add target_state enum netconsole: add STATE_DEACTIVATED to track targets disabled by low level drivers/net/netconsole.c | 171 +++++++++++++++++---- tools/testing/selftests/drivers/net/Makefile | 1 + .../selftests/drivers/net/lib/sh/lib_netcons.sh | 35 ++++- .../selftests/drivers/net/netcons_resume.sh | 97 ++++++++++++ 4 files changed, 270 insertions(+), 34 deletions(-) --- base-commit: ed01d2069e8b40eb283050b7119c25a67542a585 change-id: 20250816-netcons-retrigger-a4f547bfc867 Best regards, -- Andre Carvalho <asantostc(a)gmail.com>

1 week, 2 days

3
13
0 0

[PATCH 1/2 net-next] ipv6: use the right ifindex when replying to icmpv6 from localhost

by Fernando Fernandez Mancera

When replying to a ICMPv6 echo request that comes from localhost address the right output ifindex is 1 (lo) and not rt6i_idev dev index. Use the skb device ifindex instead. This fixes pinging to a local address from localhost source address. $ ping6 -I ::1 2001:1:1::2 -c 3 PING 2001:1:1::2 (2001:1:1::2) from ::1 : 56 data bytes 64 bytes from 2001:1:1::2: icmp_seq=1 ttl=64 time=0.037 ms 64 bytes from 2001:1:1::2: icmp_seq=2 ttl=64 time=0.069 ms 64 bytes from 2001:1:1::2: icmp_seq=3 ttl=64 time=0.122 ms 2001:1:1::2 ping statistics 3 packets transmitted, 3 received, 0% packet loss, time 2032ms rtt min/avg/max/mdev = 0.037/0.076/0.122/0.035 ms Fixes: 1b70d792cf67 ("ipv6: Use rt6i_idev index for echo replies to a local address") Signed-off-by: Fernando Fernandez Mancera <fmancera(a)suse.de> --- net/ipv6/icmp.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/ipv6/icmp.c b/net/ipv6/icmp.c index 5d2f90babaa5..5de254043133 100644 --- a/net/ipv6/icmp.c +++ b/net/ipv6/icmp.c @@ -965,7 +965,9 @@ static enum skb_drop_reason icmpv6_echo_reply(struct sk_buff *skb) fl6.daddr = ipv6_hdr(skb)->saddr; if (saddr) fl6.saddr = *saddr; - fl6.flowi6_oif = icmp6_iif(skb); + fl6.flowi6_oif = ipv6_addr_type(&fl6.daddr) & IPV6_ADDR_LOOPBACK ? + skb->dev->ifindex : + icmp6_iif(skb); fl6.fl6_icmp_type = type; fl6.flowi6_mark = mark; fl6.flowi6_uid = sock_net_uid(net, NULL); -- 2.51.1

1 week, 2 days

3
4
0 0

[PATCH net-next V3 0/6] selftests: drv-net: Fix issues in devlink_rate_tc_bw.py

by Carolina Jubran

Hi, This series fixes issues in the devlink_rate_tc_bw.py selftest and introduces a new Iperf3Runner that helps with measurement handling. Thanks, Carolina V3: - Replace generic Exception with specific exception types in load.py. V2: - Insert the test in the correct sorted position. Carolina Jubran (6): selftests: drv-net: Add devlink_rate_tc_bw.py to TEST_PROGS selftests: drv-net: introduce Iperf3Runner for measurement use cases selftests: drv-net: Use Iperf3Runner in devlink_rate_tc_bw.py selftests: drv-net: Set shell=True for sysfs writes in devlink_rate_tc_bw.py selftests: drv-net: Fix and clarify TC bandwidth split in devlink_rate_tc_bw.py selftests: drv-net: Fix tolerance calculation in devlink_rate_tc_bw.py .../testing/selftests/drivers/net/hw/Makefile | 1 + .../drivers/net/hw/devlink_rate_tc_bw.py | 174 ++++++++---------- .../drivers/net/hw/lib/py/__init__.py | 5 +- .../selftests/drivers/net/lib/py/__init__.py | 5 +- .../selftests/drivers/net/lib/py/load.py | 84 ++++++++- 5 files changed, 157 insertions(+), 112 deletions(-) -- 2.38.1

1 week, 3 days

2
7
0 0

[PATCH net-next 1/2] selftests: drv-net: gro: improve feature config

by Jakub Kicinski

We'll need to do a lot more feature handling to test HW-GRO and LRO. Clean up the feature handling for SW GRO a bit to let the next commit focus on the new test cases, only. Make sure HW GRO-like features are not enabled for the SW tests. Be more careful about changing features as "nothing changed" situations may result in non-zero error code from ethtool. Don't disable TSO on the local interface (receiver) when running over netdevsim, we just want GSO to break up the segments on the sender. Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- CC: shuah(a)kernel.org CC: linux-kselftest(a)vger.kernel.org --- tools/testing/selftests/drivers/net/gro.py | 38 ++++++++++++++++++++-- 1 file changed, 35 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/drivers/net/gro.py b/tools/testing/selftests/drivers/net/gro.py index ba83713bf7b5..6d633bdc7e67 100755 --- a/tools/testing/selftests/drivers/net/gro.py +++ b/tools/testing/selftests/drivers/net/gro.py @@ -20,7 +20,7 @@ coalescing behavior. import os from lib.py import ksft_run, ksft_exit, ksft_pr from lib.py import NetDrvEpEnv, KsftXfailEx -from lib.py import cmd, defer, bkg, ip +from lib.py import cmd, defer, bkg, ethtool, ip from lib.py import ksft_variants @@ -70,6 +70,27 @@ from lib.py import ksft_variants defer(ip, f"link set dev {dev['ifname']} mtu {dev['mtu']}", host=host) +def _set_ethtool_feat(dev, current, feats, host=None): + s2n = {True: "on", False: "off"} + + new = ["-K", dev] + old = ["-K", dev] + no_change = True + for name, state in feats.items(): + new += [name, s2n[state]] + old += [name, s2n[not state]] + + if current[name]["active"] != state: + no_change = False + if current[name]["fixed"]: + raise KsftXfailEx(f"Device does not support {name}") + if no_change: + return + + ethtool(" ".join(new), host=host) + defer(ethtool, " ".join(old), host=host) + + def _setup(cfg, test_name): """ Setup hardware loopback mode for GRO testing. """ @@ -77,6 +98,11 @@ from lib.py import ksft_variants cfg.bin_local = cfg.test_dir / "gro" cfg.bin_remote = cfg.remote.deploy(cfg.bin_local) + if not hasattr(cfg, "feat"): + cfg.feat = ethtool(f"-k {cfg.ifname}", json=True)[0] + cfg.remote_feat = ethtool(f"-k {cfg.remote_ifname}", + host=cfg.remote, json=True)[0] + # "large" test needs at least 4k MTU if test_name == "large": _set_mtu_restore(cfg.dev, 4096, None) @@ -88,15 +114,21 @@ from lib.py import ksft_variants _write_defer_restore(cfg, flush_path, "200000", defer_undo=True) _write_defer_restore(cfg, irq_path, "10", defer_undo=True) + _set_ethtool_feat(cfg.ifname, cfg.feat, + {"generic-receive-offload": True, + "rx-gro-hw": False, + "large-receive-offload": False}) + try: # Disable TSO for local tests cfg.require_nsim() # will raise KsftXfailEx if not running on nsim - cmd(f"ethtool -K {cfg.ifname} gro on tso off") - cmd(f"ethtool -K {cfg.remote_ifname} gro on tso off", host=cfg.remote) + _set_ethtool_feat(cfg.remote_ifname, cfg.remote_feat, {"tso": False}, + host=cfg.remote) except KsftXfailEx: pass + def _gro_variants(): """Generator that yields all combinations of protocol and test types.""" -- 2.51.1

1 week, 3 days

2
8
0 0

[PATCH net-next] selftests: net: py: handle interrupt during cleanup

by Jakub Kicinski

Following up on the old discussion [1]. Let the BaseExceptions out of defer()'ed cleanup. And handle it in the main loop. This allows us to exit the tests if user hit Ctrl-C during defer(). Link: https://lore.kernel.org/20251119063228.3adfd743@kernel.org # [1] Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- CC: shuah(a)kernel.org CC: willemb(a)google.com CC: petrm(a)nvidia.com CC: linux-kselftest(a)vger.kernel.org --- tools/testing/selftests/net/lib/py/ksft.py | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/net/lib/py/ksft.py b/tools/testing/selftests/net/lib/py/ksft.py index ebd82940ee50..531e7fa1b3ea 100644 --- a/tools/testing/selftests/net/lib/py/ksft.py +++ b/tools/testing/selftests/net/lib/py/ksft.py @@ -163,7 +163,7 @@ KSFT_DISRUPTIVE = True entry = global_defer_queue.pop() try: entry.exec_only() - except BaseException: + except Exception: ksft_pr(f"Exception while handling defer / cleanup (callback {i} of {qlen_start})!") tb = traceback.format_exc() for line in tb.strip().split('\n'): @@ -333,7 +333,21 @@ KsftCaseFunction = namedtuple("KsftCaseFunction", KSFT_RESULT = False cnt_key = 'fail' - ksft_flush_defer() + try: + ksft_flush_defer() + except BaseException as e: + tb = traceback.format_exc() + for line in tb.strip().split('\n'): + ksft_pr("Exception|", line) + if isinstance(e, KeyboardInterrupt): + ksft_pr() + ksft_pr("WARN: defer() interrupted, cleanup may be incomplete.") + ksft_pr(" Attempting to finish cleanup before exiting.") + ksft_pr(" Interrupt again to exit immediately.") + ksft_pr() + stop = True + # Flush was interrupted, try to finish the job best we can + ksft_flush_defer() if not cnt_key: cnt_key = 'pass' if KSFT_RESULT else 'fail' -- 2.51.1

1 week, 3 days

4
3
0 0

[PATCH net-next] selftests: netconsole: remove log noise due to socat exit

by Andre Carvalho

This removes some noise that can be distracting while looking at selftests by redirecting socat stderr to /dev/null. Before this commit, netcons_basic would output: Running with target mode: basic (ipv6) 2025/11/29 12:08:03 socat[259] W exiting on signal 15 2025/11/29 12:08:03 socat[271] W exiting on signal 15 basic : ipv6 : Test passed Running with target mode: basic (ipv4) 2025/11/29 12:08:05 socat[329] W exiting on signal 15 2025/11/29 12:08:05 socat[322] W exiting on signal 15 basic : ipv4 : Test passed Running with target mode: extended (ipv6) 2025/11/29 12:08:08 socat[386] W exiting on signal 15 2025/11/29 12:08:08 socat[386] W exiting on signal 15 2025/11/29 12:08:08 socat[380] W exiting on signal 15 extended : ipv6 : Test passed Running with target mode: extended (ipv4) 2025/11/29 12:08:10 socat[440] W exiting on signal 15 2025/11/29 12:08:10 socat[435] W exiting on signal 15 2025/11/29 12:08:10 socat[435] W exiting on signal 15 extended : ipv4 : Test passed After these changes, output looks like: Running with target mode: basic (ipv6) basic : ipv6 : Test passed Running with target mode: basic (ipv4) basic : ipv4 : Test passed Running with target mode: extended (ipv6) extended : ipv6 : Test passed Running with target mode: extended (ipv4) extended : ipv4 : Test passed Signed-off-by: Andre Carvalho <asantostc(a)gmail.com> --- tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh b/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh index 87f89fd92f8c..ae8abff4be40 100644 --- a/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh +++ b/tools/testing/selftests/drivers/net/lib/sh/lib_netcons.sh @@ -249,7 +249,7 @@ function listen_port_and_save_to() { # Just wait for 2 seconds timeout 2 ip netns exec "${NAMESPACE}" \ - socat "${SOCAT_MODE}":"${PORT}",fork "${OUTPUT}" + socat "${SOCAT_MODE}":"${PORT}",fork "${OUTPUT}" 2> /dev/null } # Only validate that the message arrived properly --- base-commit: ff736a286116d462a4067ba258fa351bc0b4ed80 change-id: 20251129-netcons-socat-noise-00e7ccf29560 Best regards, -- Andre Carvalho <asantostc(a)gmail.com>

1 week, 3 days

3
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror November 2025