November 2025 - Linux-kselftest-mirror

[PATCH v8 15/28] tracing: selftests: Add trace remote tests

by Vincent Donnefort

Exercise the tracefs interface for trace remote with a set of tests to check: * loading/unloading (unloading.tc) * reset (reset.tc) * size changes (buffer_size.tc) * consuming read (trace_pipe.tc) * non-consuming read (trace.tc) Cc: Shuah Khan <skhan(a)linuxfoundation.org> Cc: linux-kselftest(a)vger.kernel.org Signed-off-by: Vincent Donnefort <vdonnefort(a)google.com> diff --git a/tools/testing/selftests/ftrace/test.d/remotes/buffer_size.tc b/tools/testing/selftests/ftrace/test.d/remotes/buffer_size.tc new file mode 100644 index 000000000000..1a43280ffa97 --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/remotes/buffer_size.tc @@ -0,0 +1,25 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Test trace remote buffer size +# requires: remotes/test + +. $TEST_DIR/remotes/functions + +test_buffer_size() +{ + echo 0 > tracing_on + assert_unloaded + + echo 4096 > buffer_size_kb + echo 1 > tracing_on + assert_loaded + + echo 0 > tracing_on + echo 7 > buffer_size_kb +} + +if [ -z "$SOURCE_REMOTE_TEST" ]; then + set -e + setup_remote_test + test_buffer_size +fi diff --git a/tools/testing/selftests/ftrace/test.d/remotes/functions b/tools/testing/selftests/ftrace/test.d/remotes/functions new file mode 100644 index 000000000000..97a09d564a34 --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/remotes/functions @@ -0,0 +1,88 @@ +# SPDX-License-Identifier: GPL-2.0 + +setup_remote() +{ + local name=$1 + + [ -e $TRACING_DIR/remotes/$name/write_event ] || exit_unresolved + + cd remotes/$name/ + echo 0 > tracing_on + clear_trace + echo 7 > buffer_size_kb + echo 0 > events/enable + echo 1 > events/$name/selftest/enable + echo 1 > tracing_on +} + +setup_remote_test() +{ + [ -d $TRACING_DIR/remotes/test/ ] || modprobe remote_test || exit_unresolved + + setup_remote "test" +} + +assert_loaded() +{ + grep -q "(loaded)" buffer_size_kb +} + +assert_unloaded() +{ + grep -q "(unloaded)" buffer_size_kb +} + +dump_trace_pipe() +{ + output=$(mktemp $TMPDIR/remote_test.XXXXXX) + cat trace_pipe > $output & + pid=$! + sleep 1 + kill -1 $pid + + echo $output +} + +check_trace() +{ + start_id="$1" + end_id="$2" + file="$3" + + # Ensure the file is not empty + test -n "$(head $file)" + + prev_ts=0 + id=0 + + # Only keep <timestamp> <id> + tmp=$(mktemp $TMPDIR/remote_test.XXXXXX) + sed -e 's/\[[0-9]*\]\s*$[0-9]*.[0-9]*$: [a-z]* id=$[0-9]*$/\1 \2/' $file > $tmp + + while IFS= read -r line; do + ts=$(echo $line | cut -d ' ' -f 1) + id=$(echo $line | cut -d ' ' -f 2) + + test $(echo "$ts>$prev_ts" | bc) -eq 1 + test $id -eq $start_id + + prev_ts=$ts + start_id=$((start_id + 1)) + done < $tmp + + test $id -eq $end_id + rm $tmp +} + +get_cpu_ids() +{ + sed -n 's/^processor\s*:\s*$[0-9]\+$.*/\1/p' /proc/cpuinfo +} + +get_page_size() { + sed -ne 's/^.*data.*size:$[0-9][0-9]*$.*/\1/p' events/header_page +} + +get_selftest_event_size() { + sed -ne 's/^.*field:.*;.*size:$[0-9][0-9]*$;.*/\1/p' events/*/selftest/format | awk '{s+=$1} END {print s}' +} diff --git a/tools/testing/selftests/ftrace/test.d/remotes/reset.tc b/tools/testing/selftests/ftrace/test.d/remotes/reset.tc new file mode 100644 index 000000000000..4d176349b2bc --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/remotes/reset.tc @@ -0,0 +1,90 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Test trace remote reset +# requires: remotes/test + +. $TEST_DIR/remotes/functions + +check_reset() +{ + write_event_path="write_event" + taskset="" + + clear_trace + + # Is the buffer empty? + output=$(dump_trace_pipe) + test $(wc -l $output | cut -d ' ' -f1) -eq 0 + + if $(echo $(pwd) | grep -q "per_cpu/cpu"); then + write_event_path="../../write_event" + cpu_id=$(echo $(pwd) | sed -e 's/.*per_cpu\/cpu//') + taskset="taskset -c $cpu_id" + fi + rm $output + + # Can we properly write a new event? + $taskset echo 7890 > $write_event_path + output=$(dump_trace_pipe) + test $(wc -l $output | cut -d ' ' -f1) -eq 1 + grep -q "id=7890" $output + rm $output +} + +test_global_interface() +{ + output=$(mktemp $TMPDIR/remote_test.XXXXXX) + + # Confidence check + echo 123456 > write_event + output=$(dump_trace_pipe) + grep -q "id=123456" $output + rm $output + + # Reset single event + echo 1 > write_event + check_reset + + # Reset lost events + for i in $(seq 1 10000); do + echo 1 > write_event + done + check_reset +} + +test_percpu_interface() +{ + [ "$(get_cpu_ids | wc -l)" -ge 2 ] || return 0 + + for cpu in $(get_cpu_ids); do + taskset -c $cpu echo 1 > write_event + done + + check_non_empty=0 + for cpu in $(get_cpu_ids); do + cd per_cpu/cpu$cpu/ + + if [ $check_non_empty -eq 0 ]; then + check_reset + check_non_empty=1 + else + # Check we have only reset 1 CPU + output=$(dump_trace_pipe) + test $(wc -l $output | cut -d ' ' -f1) -eq 1 + rm $output + fi + cd - + done +} + +test_reset() +{ + test_global_interface + test_percpu_interface +} + +if [ -z "$SOURCE_REMOTE_TEST" ]; then + set -e + setup_remote_test + test_reset +fi diff --git a/tools/testing/selftests/ftrace/test.d/remotes/trace.tc b/tools/testing/selftests/ftrace/test.d/remotes/trace.tc new file mode 100644 index 000000000000..081133ec45ff --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/remotes/trace.tc @@ -0,0 +1,127 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Test trace remote non-consuming read +# requires: remotes/test + +. $TEST_DIR/remotes/functions + +test_trace() +{ + echo 0 > tracing_on + assert_unloaded + + echo 7 > buffer_size_kb + echo 1 > tracing_on + assert_loaded + + # Simple test: Emit few events and try to read them + for i in $(seq 1 8); do + echo $i > write_event + done + + check_trace 1 8 trace + + # + # Test interaction with consuming read + # + + cat trace_pipe > /dev/null & + pid=$! + + sleep 1 + kill $pid + + test $(wc -l < trace) -eq 0 + + for i in $(seq 16 32); do + echo $i > write_event + done + + check_trace 16 32 trace + + # + # Test interaction with reset + # + + echo 0 > trace + + test $(wc -l < trace) -eq 0 + + for i in $(seq 1 8); do + echo $i > write_event + done + + check_trace 1 8 trace + + # + # Test interaction with lost events + # + + # Ensure the writer is not on the reader page by reloading the buffer + echo 0 > tracing_on + echo 0 > trace + assert_unloaded + echo 1 > tracing_on + assert_loaded + + # Ensure ring-buffer overflow by emitting events from the same CPU + for cpu in $(get_cpu_ids); do + break + done + + events_per_page=$(($(get_page_size) / $(get_selftest_event_size))) # Approx: does not take TS into account + nr_events=$(($events_per_page * 2)) + for i in $(seq 1 $nr_events); do + taskset -c $cpu echo $i > write_event + done + + id=$(sed -n -e '1s/\[[0-9]*\]\s*[0-9]*.[0-9]*: [a-z]* id=$[0-9]*$/\1/p' trace) + test $id -ne 1 + + check_trace $id $nr_events trace + + # + # Test per-CPU interface + # + echo 0 > trace + + for cpu in $(get_cpu_ids) ; do + taskset -c $cpu echo $cpu > write_event + done + + for cpu in $(get_cpu_ids); do + cd per_cpu/cpu$cpu/ + + check_trace $cpu $cpu trace + + cd - > /dev/null + done + + # + # Test with hotplug + # + + [ "$(get_cpu_ids | wc -l)" -ge 2 ] || return 0 + + echo 0 > trace + + for cpu in $(get_cpu_ids); do + echo 0 > /sys/devices/system/cpu/cpu$cpu/online + break + done + + for i in $(seq 1 8); do + echo $i > write_event + done + + check_trace 1 8 trace + + echo 1 > /sys/devices/system/cpu/cpu$cpu/online +} + +if [ -z "$SOURCE_REMOTE_TEST" ]; then + set -e + + setup_remote_test + test_trace +fi diff --git a/tools/testing/selftests/ftrace/test.d/remotes/trace_pipe.tc b/tools/testing/selftests/ftrace/test.d/remotes/trace_pipe.tc new file mode 100644 index 000000000000..d28eaee10c7c --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/remotes/trace_pipe.tc @@ -0,0 +1,127 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Test trace remote consuming read +# requires: remotes/test + +. $TEST_DIR/remotes/functions + +test_trace_pipe() +{ + echo 0 > tracing_on + assert_unloaded + + # Emit events from the same CPU + for cpu in $(get_cpu_ids); do + break + done + + # + # Simple test: Emit enough events to fill few pages + # + + echo 1024 > buffer_size_kb + echo 1 > tracing_on + assert_loaded + + events_per_page=$(($(get_page_size) / $(get_selftest_event_size))) + nr_events=$(($events_per_page * 4)) + + output=$(mktemp $TMPDIR/remote_test.XXXXXX) + + cat trace_pipe > $output & + pid=$! + + for i in $(seq 1 $nr_events); do + taskset -c $cpu echo $i > write_event + done + + echo 0 > tracing_on + sleep 1 + kill $pid + + check_trace 1 $nr_events $output + + rm $output + + # + # Test interaction with lost events + # + + assert_unloaded + echo 7 > buffer_size_kb + echo 1 > tracing_on + assert_loaded + + nr_events=$((events_per_page * 2)) + for i in $(seq 1 $nr_events); do + taskset -c $cpu echo $i > write_event + done + + output=$(dump_trace_pipe) + + lost_events=$(sed -n -e '1s/CPU:.*\[LOST $[0-9]*$ EVENTS\]/\1/p' $output) + test -n "$lost_events" + + id=$(sed -n -e '2s/\[[0-9]*\]\s*[0-9]*.[0-9]*: [a-z]* id=$[0-9]*$/\1/p' $output) + test "$id" -eq $(($lost_events + 1)) + + # Drop [LOST EVENTS] line + sed -i '1d' $output + + check_trace $id $nr_events $output + + rm $output + + # + # Test per-CPU interface + # + + echo 0 > trace + echo 1 > tracing_on + + for cpu in $(get_cpu_ids); do + taskset -c $cpu echo $cpu > write_event + done + + for cpu in $(get_cpu_ids); do + cd per_cpu/cpu$cpu/ + output=$(dump_trace_pipe) + + check_trace $cpu $cpu $output + + rm $output + cd - > /dev/null + done + + # + # Test interaction with hotplug + # + + [ "$(get_cpu_ids | wc -l)" -ge 2 ] || return 0 + + echo 0 > trace + + for cpu in $(get_cpu_ids); do + echo 0 > /sys/devices/system/cpu/cpu$cpu/online + break + done + + for i in $(seq 1 8); do + echo $i > write_event + done + + output=$(dump_trace_pipe) + + check_trace 1 8 $output + + rm $output + + echo 1 > /sys/devices/system/cpu/cpu$cpu/online +} + +if [ -z "$SOURCE_REMOTE_TEST" ]; then + set -e + + setup_remote_test + test_trace_pipe +fi diff --git a/tools/testing/selftests/ftrace/test.d/remotes/unloading.tc b/tools/testing/selftests/ftrace/test.d/remotes/unloading.tc new file mode 100644 index 000000000000..cac2190183f6 --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/remotes/unloading.tc @@ -0,0 +1,41 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Test trace remote unloading +# requires: remotes/test + +. $TEST_DIR/remotes/functions + +test_unloading() +{ + # No reader, writing + assert_loaded + + # No reader, no writing + echo 0 > tracing_on + assert_unloaded + + # 1 reader, no writing + cat trace_pipe & + pid=$! + sleep 1 + assert_loaded + kill $pid + assert_unloaded + + # No reader, no writing, events + echo 1 > tracing_on + echo 1 > write_event + echo 0 > tracing_on + assert_loaded + + # Test reset + clear_trace + assert_unloaded +} + +if [ -z "$SOURCE_REMOTE_TEST" ]; then + set -e + + setup_remote_test + test_unloading +fi -- 2.51.2.1041.gc1ab5b90ca-goog

1 month

1
0
0 0

[PATCH v2] selftests: harness: Support KCOV.

by Kuniyuki Iwashima

While writing a selftest with kselftest_harness.h, I often want to check which paths are actually exercised. Let's support generating KCOV coverage data. We can specify the output directory via the KCOV_OUTPUT environment variable, and the number of instructions to collect via the KCOV_SLOTS environment variable. # KCOV_OUTPUT=$PWD/kcov KCOV_SLOTS=$((4096 * 2)) \ ./tools/testing/selftests/net/af_unix/scm_inq Both variables can also be specified as the make variable. # make -C tools/testing/selftests/ \ KCOV_OUTPUT=$PWD/kcov KCOV_SLOTS=$((4096 * 4)) \ kselftest_override_timeout=60 TARGETS=net/af_unix run_tests The coverage data can be simply decoded with addr2line: $ cat kcov/* | sort | uniq | addr2line -e vmlinux | grep unix net/unix/af_unix.c:1056 net/unix/af_unix.c:3138 net/unix/af_unix.c:3834 net/unix/af_unix.c:3838 net/unix/af_unix.c:311 (discriminator 2) ... or more nicely with a script embedded in vock [0]: $ cat kcov/* | sort | uniq > local.log $ python3 ~/kernel/tools/vock/report.py \ --kernel-src ./ --vmlinux ./vmlinux \ --mode local --local-log local.log --filter unix ... ------------------------------- Coverage Report -------------------------------- 📄 net/unix/af_unix.c (276 lines) ... 942 | static int unix_setsockopt(struct socket *sock, int level, int optname, 943 | sockptr_t optval, unsigned int optlen) 944 | { ... 961 | switch (optname) { 962 | case SO_INQ: 963 > if (sk->sk_type != SOCK_STREAM) 964 | return -EINVAL; 965 | 966 > if (val > 1 || val < 0) 967 | return -EINVAL; 968 | 969 > WRITE_ONCE(u->recvmsg_inq, val); 970 | break; Link: https://github.com/kzall0c/vock/blob/f3d97de9954f9df758c0ab287ca7e24e654288… #[0] Signed-off-by: Kuniyuki Iwashima <kuniyu(a)google.com> --- v2: Support TEST() v1: https://lore.kernel.org/linux-kselftest/20251017084022.3721950-1-kuniyu@goo… --- Documentation/dev-tools/kselftest.rst | 41 ++++++ tools/testing/selftests/Makefile | 14 ++- tools/testing/selftests/kselftest_harness.h | 133 +++++++++++++++++++- 3 files changed, 178 insertions(+), 10 deletions(-) diff --git a/Documentation/dev-tools/kselftest.rst b/Documentation/dev-tools/kselftest.rst index 18c2da67fae4..5c2b92ac4a30 100644 --- a/Documentation/dev-tools/kselftest.rst +++ b/Documentation/dev-tools/kselftest.rst @@ -200,6 +200,47 @@ You can look at the TAP output to see if you ran into the timeout. Test runners which know a test must run under a specific time can then optionally treat these timeouts then as fatal. +KCOV for selftests +================== + +Selftests built with `kselftest_harness.h` natively support generating +KCOV coverage data. See :doc:`KCOV: code coverage for fuzzing </dev-tools/kcov>` +for prerequisites. + +You can specify the output directory with the `KCOV_OUTPUT` environment +variable. Additionally, you can specify the number of instructions to +collect with the `KCOV_SLOTS` environment variable :: + + # KCOV_OUTPUT=$PWD/kcov KCOV_SLOTS=$((4096 * 2)) \ + ./tools/testing/selftests/net/af_unix/scm_inq + +In the output directory, a coverage file is generated for each test +case in the selftest :: + + $ ls kcov/ + scm_inq.dgram.basic scm_inq.seqpacket.basic scm_inq.stream.basic + +The default value of `KCOV_SLOTS` is `4096`, and `KCOV_SLOTS` multiplied +by `sizeof(unsigned long)` must be multiple of `4096`, so the smallest +value is `512`. + +Both `KCOV_OUTPUT` and `KCOV_SLOTS` can be specified as the variables +on the `make` command line :: + + # make -C tools/testing/selftests/ \ + kselftest_override_timeout=60 \ + KCOV_OUTPUT=$PWD/kcov KCOV_SLOTS=$((4096 * 4)) \ + TARGETS=net/af_unix run_tests + +The collected data can be decoded with `addr2line` :: + + $ cat kcov/* | sort | uniq | addr2line -e vmlinux | grep unix + net/unix/af_unix.c:1056 + net/unix/af_unix.c:3138 + net/unix/af_unix.c:3834 + net/unix/af_unix.c:3838 + ... + Packaging selftests =================== diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index c46ebdb9b8ef..40e70fb1a347 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -218,12 +218,14 @@ all: done; exit $$ret; run_tests: all - @for TARGET in $(TARGETS); do \ - BUILD_TARGET=$$BUILD/$$TARGET; \ - $(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET run_tests \ - SRC_PATH=$(shell readlink -e $$(pwd)) \ - OBJ_PATH=$(BUILD) \ - O=$(abs_objtree); \ + @for TARGET in $(TARGETS); do \ + BUILD_TARGET=$$BUILD/$$TARGET; \ + $(MAKE) OUTPUT=$$BUILD_TARGET \ + KCOV_OUTPUT=$(abspath $(KCOV_OUTPUT)) \ + -C $$TARGET run_tests \ + SRC_PATH=$(shell readlink -e $$(pwd)) \ + OBJ_PATH=$(BUILD) \ + O=$(abs_objtree); \ done; hotplug: diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h index 3f66e862e83e..5b7a01722981 100644 --- a/tools/testing/selftests/kselftest_harness.h +++ b/tools/testing/selftests/kselftest_harness.h @@ -56,6 +56,8 @@ #include <asm/types.h> #include <ctype.h> #include <errno.h> +#include <fcntl.h> +#include <linux/kcov.h> #include <linux/unistd.h> #include <poll.h> #include <stdbool.h> @@ -63,7 +65,9 @@ #include <stdio.h> #include <stdlib.h> #include <string.h> +#include <sys/ioctl.h> #include <sys/mman.h> +#include <sys/stat.h> #include <sys/types.h> #include <sys/wait.h> #include <unistd.h> @@ -175,9 +179,12 @@ static void test_name(struct __test_metadata *_metadata); \ static void wrapper_##test_name( \ struct __test_metadata *_metadata, \ - struct __fixture_variant_metadata __attribute__((unused)) *variant) \ + struct __fixture_variant_metadata __attribute__((unused)) *variant, \ + char *test_full_name) \ { \ + enable_kcov(_metadata); \ test_name(_metadata); \ + disable_kcov(_metadata, test_full_name); \ } \ static struct __test_metadata _##test_name##_object = \ { .name = #test_name, \ @@ -401,7 +408,8 @@ const FIXTURE_VARIANT(fixture_name) *variant); \ static void wrapper_##fixture_name##_##test_name( \ struct __test_metadata *_metadata, \ - struct __fixture_variant_metadata *variant) \ + struct __fixture_variant_metadata *variant, \ + char *test_full_name) \ { \ /* fixture data is alloced, setup, and torn down per call. */ \ FIXTURE_DATA(fixture_name) self_private, *self = NULL; \ @@ -430,7 +438,9 @@ if (_metadata->exit_code) \ _exit(0); \ *_metadata->no_teardown = false; \ + enable_kcov(_metadata); \ fixture_name##_##test_name(_metadata, self, variant->data); \ + disable_kcov(_metadata, test_full_name); \ _metadata->teardown_fn(false, _metadata, self, variant->data); \ _exit(0); \ } else if (child < 0 || child != waitpid(child, &status, 0)) { \ @@ -470,6 +480,8 @@ object->teardown_fn = &wrapper_##fixture_name##_##test_name##_teardown; \ object->termsig = signal; \ object->timeout = tmout; \ + object->kcov_fd = -1; \ + object->kcov_slots = -1; \ _##fixture_name##_##test_name##_object = object; \ __register_test(object); \ } \ @@ -908,7 +920,8 @@ __register_fixture_variant(struct __fixture_metadata *f, struct __test_metadata { const char *name; void (*fn)(struct __test_metadata *, - struct __fixture_variant_metadata *); + struct __fixture_variant_metadata *, + char *test_name); pid_t pid; /* pid of test when being run */ struct __fixture_metadata *fixture; void (*teardown_fn)(bool in_parent, struct __test_metadata *_metadata, @@ -923,6 +936,10 @@ struct __test_metadata { const void *variant; struct __test_results *results; struct __test_metadata *prev, *next; + int kcov_fd; + int kcov_slots; + char *kcov_dir; + unsigned long *kcov_mem; }; static inline bool __test_passed(struct __test_metadata *metadata) @@ -1185,6 +1202,114 @@ static bool test_enabled(int argc, char **argv, return !has_positive; } +#define KCOV_SLOTS 4096 + +static void enable_kcov(struct __test_metadata *t) +{ + char *slots; + int err; + + t->kcov_dir = getenv("KCOV_OUTPUT"); + if (!t->kcov_dir || *t->kcov_dir == '\0') + return; + + slots = getenv("KCOV_SLOTS"); + if (slots && *slots != '\0') + sscanf(slots, "%d", &t->kcov_slots); + if (t->kcov_slots <= 0) + t->kcov_slots = KCOV_SLOTS; + + t->kcov_fd = open("/sys/kernel/debug/kcov", O_RDWR); + if (t->kcov_fd < 0) { + ksft_print_msg("ERROR OPENING KCOV FD\n"); + goto err; + } + + err = ioctl(t->kcov_fd, KCOV_INIT_TRACE, t->kcov_slots); + if (err) { + ksft_print_msg("ERROR INITIALISING KCOV\n"); + goto err; + } + + t->kcov_mem = mmap(NULL, sizeof(unsigned long) * t->kcov_slots, + PROT_READ | PROT_WRITE, MAP_SHARED, t->kcov_fd, 0); + if ((void *)t->kcov_mem == MAP_FAILED) { + ksft_print_msg("ERROR ALLOCATING MEMORY FOR KCOV\n"); + goto err; + } + + err = ioctl(t->kcov_fd, KCOV_ENABLE, KCOV_TRACE_PC); + if (err) { + ksft_print_msg("ERROR ENABLING KCOV\n"); + goto err; + } + + __atomic_store_n(&t->kcov_mem[0], 0, __ATOMIC_RELAXED); + return; +err: + t->exit_code = KSFT_FAIL; + _exit(KSFT_FAIL); +} + +static void disable_kcov(struct __test_metadata *t, char *test_name) +{ + int slots, err, dir, fd, i; + + if (t->kcov_fd == -1) + return; + + slots = __atomic_load_n(&t->kcov_mem[0], __ATOMIC_RELAXED); + if (slots == t->kcov_slots - 1) + ksft_print_msg("Set KCOV_SLOTS to a value greater than %d\n", t->kcov_slots); + + err = ioctl(t->kcov_fd, KCOV_DISABLE, 0); + if (err) { + ksft_print_msg("ERROR DISABLING KCOV\n"); + goto out; + } + + err = mkdir(t->kcov_dir, 0755); + if (err == -1 && errno != EEXIST) { + ksft_print_msg("ERROR CREATING '%s'\n", t->kcov_dir); + goto out; + } + err = 0; + + dir = open(t->kcov_dir, O_DIRECTORY); + if (dir < 0) { + ksft_print_msg("ERROR OPENING %s\n", t->kcov_dir); + err = dir; + goto out; + } + + fd = openat(dir, test_name, O_RDWR | O_CREAT | O_TRUNC); + + close(dir); + + if (fd == -1) { + ksft_print_msg("ERROR CREATING '%s' at '%s'\n", test_name, t->kcov_dir); + err = fd; + goto out; + } + + for (i = 0; i < slots; i++) { + char buf[64]; + int size; + + size = snprintf(buf, 64, "0x%lx\n", t->kcov_mem[i + 1]); + write(fd, buf, size); + } + +out: + munmap(t->kcov_mem, sizeof(t->kcov_mem[0]) * t->kcov_slots); + close(t->kcov_fd); + + if (err) { + t->exit_code = KSFT_FAIL; + _exit(KSFT_FAIL); + } +} + static void __run_test(struct __fixture_metadata *f, struct __fixture_variant_metadata *variant, struct __test_metadata *t) @@ -1216,7 +1341,7 @@ static void __run_test(struct __fixture_metadata *f, t->exit_code = KSFT_FAIL; } else if (child == 0) { setpgrp(); - t->fn(t, variant); + t->fn(t, variant, test_name); _exit(t->exit_code); } else { t->pid = child; -- 2.51.1.838.g19442a804e-goog

1 month

3
3
0 0

[PATCH RESEND 0/5] release of KTAP version 2

by Rae Moar

Hi all! I wanted to resend out this series to respark the discussion on KTAP version 2. Many of the features proposed are already in use by KUnit. This would add these features to the KTAP documentation. Note that all the features of KTAP v2 are backwards compatible. Also, today is my last day at Google so I will be responding with my personal email afterwards. -- This patch series represents the final release of KTAP version 2. There have been open discussions on version 2 for just over 2 years. This patch series marks the end of KTAP version 2 development and beginning of the KTAP version 3 development. The largest component of KTAP version 2 release is the addition of test metadata to the specification. KTAP metadata could include any test information that is pertinent for user interaction before or after the running of the test. For example, the test file path or the test speed. Example of KTAP Metadata: KTAP version 2 #:ktap_test: main #:ktap_arch: uml 1..1 KTAP version 2 #:ktap_test: suite_1 #:ktap_subsystem: example #:ktap_test_file: lib/test.c 1..2 ok 1 test_1 #:ktap_test: test_2 #:ktap_speed: very_slow # test_2 has begun #:custom_is_flaky: true ok 2 test_2 # suite_1 has passed ok 1 suite_1 The release also includes some formatting fixes and changes to update the specification to version 2. Frank Rowand (2): ktap_v2: change version to 2-rc in KTAP specification ktap_v2: change "version 1" to "version 2" in examples Rae Moar (3): ktap_v2: add test metadata ktap_v2: formatting fixes to ktap spec ktap_v2: change version to 2 in KTAP specification Documentation/dev-tools/ktap.rst | 273 +++++++++++++++++++++++++++++-- 1 file changed, 257 insertions(+), 16 deletions(-) base-commit: 9de5f847ef8fa205f4fd704a381d32ecb5b66da9 -- 2.51.2.1041.gc1ab5b90ca-goog

1 month

1
5
0 0

[PATCH] vfio: selftests: Store libvfio build outputs in $(OUTPUT)/libvfio

by David Matlack

Store the tools/testing/selftests/vfio/lib outputs (e.g. object files) in $(OUTPUT)/libvfio rather than in $(OUTPUT)/lib. This is in preparation for building the VFIO selftests library into the KVM selftests (see Link below). Specifically this will avoid name conflicts between tools/testing/selftests/{vfio,kvm/lib and also avoid leaving behind empty directories under tools/testing/selftests/kvm after a make clean. Link: https://lore.kernel.org/kvm/20250912222525.2515416-2-dmatlack@google.com/ Signed-off-by: David Matlack <dmatlack(a)google.com> --- Note: This patch applies on top of vfio/next. https://github.com/awilliam/linux-vfio/tree/next tools/testing/selftests/vfio/lib/libvfio.mk | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/tools/testing/selftests/vfio/lib/libvfio.mk b/tools/testing/selftests/vfio/lib/libvfio.mk index 5d11c3a89a28..3c0cdac30cb6 100644 --- a/tools/testing/selftests/vfio/lib/libvfio.mk +++ b/tools/testing/selftests/vfio/lib/libvfio.mk @@ -1,24 +1,26 @@ include $(top_srcdir)/scripts/subarch.include ARCH ?= $(SUBARCH) -VFIO_DIR := $(selfdir)/vfio +LIBVFIO_SRCDIR := $(selfdir)/vfio/lib -LIBVFIO_C := lib/vfio_pci_device.c -LIBVFIO_C += lib/vfio_pci_driver.c +LIBVFIO_C := vfio_pci_device.c +LIBVFIO_C += vfio_pci_driver.c ifeq ($(ARCH:x86_64=x86),x86) -LIBVFIO_C += lib/drivers/ioat/ioat.c -LIBVFIO_C += lib/drivers/dsa/dsa.c +LIBVFIO_C += drivers/ioat/ioat.c +LIBVFIO_C += drivers/dsa/dsa.c endif -LIBVFIO_O := $(patsubst %.c, $(OUTPUT)/%.o, $(LIBVFIO_C)) +LIBVFIO_OUTPUT := $(OUTPUT)/libvfio + +LIBVFIO_O := $(patsubst %.c, $(LIBVFIO_OUTPUT)/%.o, $(LIBVFIO_C)) LIBVFIO_O_DIRS := $(shell dirname $(LIBVFIO_O) | uniq) $(shell mkdir -p $(LIBVFIO_O_DIRS)) -CFLAGS += -I$(VFIO_DIR)/lib/include +CFLAGS += -I$(LIBVFIO_SRCDIR)/include -$(LIBVFIO_O): $(OUTPUT)/%.o : $(VFIO_DIR)/%.c +$(LIBVFIO_O): $(LIBVFIO_OUTPUT)/%.o : $(LIBVFIO_SRCDIR)/%.c $(CC) $(CFLAGS) $(CPPFLAGS) $(TARGET_ARCH) -c $< -o $@ -EXTRA_CLEAN += $(LIBVFIO_O) +EXTRA_CLEAN += $(LIBVFIO_OUTPUT) base-commit: acb59a4bb8ed34e738a4c3463127bf3f6b5e11a9 -- 2.51.0.534.gc79095c0ca-goog

1 month

2
1
0 0

[PATCH net-next v6 0/6] net: devmem: improve cpu cost of RX token management

by Bobby Eshleman

This series improves the CPU cost of RX token management by adding a socket option that configures the socket to avoid the xarray allocator and instead use an niov array and a uref field in niov. Improvement is ~13% cpu util per RX user thread. Using kperf, the following results were observed: Before: Average RX worker idle %: 13.13, flows 4, test runs 11 After: Average RX worker idle %: 26.32, flows 4, test runs 11 Two other approaches were tested, but with no improvement. Namely, 1) using a hashmap for tokens and 2) keeping an xarray of atomic counters but using RCU so that the hotpath could be mostly lockless. Neither of these approaches proved better than the simple array in terms of CPU. The sockopt SO_DEVMEM_AUTORELEASE is added to toggle the optimization. It defaults to 0 (i.e., optimization on). Note that prior revs reported only a 5% gain. This lower gain was measured with cpu frequency boosting (unknowingly) disabled. A consistent ~13% is measured for both kperf and nccl workloads with cpu frequency boosting on. To: David S. Miller <davem(a)davemloft.net> To: Eric Dumazet <edumazet(a)google.com> To: Jakub Kicinski <kuba(a)kernel.org> To: Paolo Abeni <pabeni(a)redhat.com> To: Simon Horman <horms(a)kernel.org> To: Kuniyuki Iwashima <kuniyu(a)google.com> To: Willem de Bruijn <willemb(a)google.com> To: Neal Cardwell <ncardwell(a)google.com> To: David Ahern <dsahern(a)kernel.org> To: Mina Almasry <almasrymina(a)google.com> To: Arnd Bergmann <arnd(a)arndb.de> To: Jonathan Corbet <corbet(a)lwn.net> To: Andrew Lunn <andrew+netdev(a)lunn.ch> To: Shuah Khan <shuah(a)kernel.org> Cc: Stanislav Fomichev <sdf(a)fomichev.me> Cc: netdev(a)vger.kernel.org Cc: linux-kernel(a)vger.kernel.org Cc: linux-arch(a)vger.kernel.org Cc: linux-doc(a)vger.kernel.org Cc: linux-kselftest(a)vger.kernel.org Signed-off-by: Bobby Eshleman <bobbyeshleman(a)meta.com> Changes in v6: - renamed 'net: devmem: use niov array for token management' to refer to optionality of new config - added documentation and tests - make autorelease flag per-socket sockopt instead of binding field / sysctl - many per-patch changes (see Changes sections per-patch) - Link to v5: https://lore.kernel.org/r/20251023-scratch-bobbyeshleman-devmem-tcp-token-u… Changes in v5: - add sysctl to opt-out of performance benefit, back to old token release - Link to v4: https://lore.kernel.org/all/20250926-scratch-bobbyeshleman-devmem-tcp-token… Changes in v4: - rebase to net-next - Link to v3: https://lore.kernel.org/r/20250926-scratch-bobbyeshleman-devmem-tcp-token-u… Changes in v3: - make urefs per-binding instead of per-socket, reducing memory footprint - fallback to cleaning up references in dmabuf unbind if socket leaked tokens - drop ethtool patch - Link to v2: https://lore.kernel.org/r/20250911-scratch-bobbyeshleman-devmem-tcp-token-u… Changes in v2: - net: ethtool: prevent user from breaking devmem single-binding rule (Mina) - pre-assign niovs in binding->vec for RX case (Mina) - remove WARNs on invalid user input (Mina) - remove extraneous binding ref get (Mina) - remove WARN for changed binding (Mina) - always use GFP_ZERO for binding->vec (Mina) - fix length of alloc for urefs - use atomic_set(, 0) to initialize sk_user_frags.urefs - Link to v1: https://lore.kernel.org/r/20250902-scratch-bobbyeshleman-devmem-tcp-token-u… --- Bobby Eshleman (6): net: devmem: rename tx_vec to vec in dmabuf binding net: devmem: refactor sock_devmem_dontneed for autorelease split net: devmem: prepare for autorelease rx token management net: devmem: add SO_DEVMEM_AUTORELEASE for autorelease control net: devmem: document SO_DEVMEM_AUTORELEASE socket option net: devmem: add tests for SO_DEVMEM_AUTORELEASE socket option Documentation/networking/devmem.rst | 70 +++++++++- include/net/netmem.h | 1 + include/net/sock.h | 13 +- include/uapi/asm-generic/socket.h | 2 + net/core/devmem.c | 54 +++++--- net/core/devmem.h | 4 +- net/core/sock.c | 152 ++++++++++++++++++---- net/ipv4/tcp.c | 69 ++++++++-- net/ipv4/tcp_ipv4.c | 11 +- net/ipv4/tcp_minisocks.c | 5 +- tools/include/uapi/asm-generic/socket.h | 2 + tools/testing/selftests/drivers/net/hw/devmem.py | 115 +++++++++++++++- tools/testing/selftests/drivers/net/hw/ncdevmem.c | 20 ++- 13 files changed, 453 insertions(+), 65 deletions(-) --- base-commit: 255d75ef029f33f75fcf5015052b7302486f7ad2 change-id: 20250829-scratch-bobbyeshleman-devmem-tcp-token-upstream-292be174d503 Best regards, -- Bobby Eshleman <bobbyeshleman(a)meta.com>

1 month

5
17
0 0

[PATCH bpf-next 0/2] selftests/bpf: enfoce SO_REUSEADDR in basic test servers

by Alexis Lothoré (eBPF Foundation)

Hello, This small series is another follow-up to [1], in which I misunderstood Martin's initial feedback (see [2]). I proposed to make tc-tunnel apply SO_REUSEPORT once server is brought up. This series updates start_server_addr to really apply Martin's proposal after his clarification [3] [1] https://lore.kernel.org/bpf/20251031-tc_tunnel_improv-v1-0-0ffe44d27eda@boo… [2] https://lore.kernel.org/bpf/efa3540a-1f52-46ca-9f49-e631a5e3e48c@linux.dev/ [3] https://lore.kernel.org/bpf/4cbabdf1-af2c-490a-a41a-b40c1539c1cb@linux.dev/ Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore(a)bootlin.com> --- Alexis Lothoré (eBPF Foundation) (2): selftests/bpf: systematically add SO_REUSEADDR in start_server_addr selftests/bpf: use start_server_str rather than start_reuseport_server in tc_tunnel tools/testing/selftests/bpf/network_helpers.c | 9 +++++++- .../selftests/bpf/prog_tests/test_tc_tunnel.c | 27 ++++++++++++---------- 2 files changed, 23 insertions(+), 13 deletions(-) --- base-commit: de0745f7cc98146c70a020bc3a1b73c7f3405282 change-id: 20251104-start-server-soreuseaddr-e442446e2d37 Best regards, -- Alexis Lothoré, Bootlin Embedded Linux and Kernel engineering https://bootlin.com

1 month

3
4
0 0

[PATCH] selftests/tracing: Add basic test for trace_marker_raw file

by Steven Rostedt

From: Steven Rostedt <rostedt(a)goodmis.org> Commit 64cf7d058a00 ("tracing: Have trace_marker use per-cpu data to read user space") made an update that fixed both trace_marker and trace_marker_raw. But the small difference made to trace_marker_raw had a blatant bug in it that any basic testing would have uncovered. Unfortunately, the self tests have tests for trace_marker but nothing for trace_marker_raw which allowed the bug to get upstream. Add basic selftests to test trace_marker_raw so that this doesn't happen again. Signed-off-by: Steven Rostedt (Google) <rostedt(a)goodmis.org> --- .../ftrace/test.d/00basic/trace_marker_raw.tc | 107 ++++++++++++++++++ 1 file changed, 107 insertions(+) create mode 100644 tools/testing/selftests/ftrace/test.d/00basic/trace_marker_raw.tc diff --git a/tools/testing/selftests/ftrace/test.d/00basic/trace_marker_raw.tc b/tools/testing/selftests/ftrace/test.d/00basic/trace_marker_raw.tc new file mode 100644 index 000000000000..7daf7292209e --- /dev/null +++ b/tools/testing/selftests/ftrace/test.d/00basic/trace_marker_raw.tc @@ -0,0 +1,107 @@ +#!/bin/sh +# SPDX-License-Identifier: GPL-2.0 +# description: Basic tests on writing to trace_marker_raw +# requires: trace_marker_raw +# flags: instance + +is_little_endian() { + if lscpu | grep -q 'Little Endian'; then + echo 1; + else + echo 0; + fi +} + +little=`is_little_endian` + +make_str() { + id=$1 + cnt=$2 + + if [ $little -eq 1 ]; then + val=`printf "\\%03o\\%03o\\%03o\\%03o" \ + $(($id & 0xff)) \ + $((($id >> 8) & 0xff)) \ + $((($id >> 16) & 0xff)) \ + $((($id >> 24) & 0xff))` + else + val=`printf "\\%03o\\%03o\\%03o\\%03o" \ + $((($id >> 24) & 0xff)) \ + $((($id >> 16) & 0xff)) \ + $((($id >> 8) & 0xff)) \ + $(($id & 0xff))` + fi + + data=`printf -- 'X%.0s' $(seq $cnt)` + + printf "${val}${data}" +} + +write_buffer() { + id=$1 + size=$2 + + # write the string into the raw marker + make_str $id $size > trace_marker_raw +} + + +test_multiple_writes() { + + # Write a bunch of data where the id is the count of + # data to write + for i in `seq 1 10` `seq 101 110` `seq 1001 1010`; do + write_buffer $i $i + done + + # add a little buffer + echo stop > trace_marker + + # Check to make sure the number of entries is the id (rounded up by 4) + awk '/.*: # [0-9a-f]* / { + print; + cnt = -1; + for (i = 0; i < NF; i++) { + # The counter is after the "#" marker + if ( $i == "#" ) { + i++; + cnt = strtonum("0x" $i); + num = NF - (i + 1); + # The number of items is always rounded up by 4 + cnt2 = int((cnt + 3) / 4) * 4; + if (cnt2 != num) { + exit 1; + } + break; + } + } + } + // { if (NR > 30) { exit 0; } } ' trace_pipe; +} + + +get_buffer_data_size() { + sed -ne 's/^.*data.*size:$[0-9][0-9]*$.*/\1/p' events/header_page +} + +test_buffer() { + + # The id must be four bytes, test that 3 bytes fails a write + if echo -n abc > ./trace_marker_raw ; then + echo "Too small of write expected to fail but did not" + exit_fail + fi + + size=`get_buffer_data_size` + echo size = $size + + # Now add a little more than what it can handle + + if write_buffer 0xdeadbeef $size ; then + echo "Too big of write expected to fail but did not" + exit_fail + fi +} + +test_buffer +test_multiple_writes -- 2.51.0

1 month

3
4
0 0

[PATCH] selftests/dma: fix invalid array access in printf

by Zhang Chujun

The printf statement attempts to print the DMA direction string using the syntax 'dir[directions]', which is an invalid array access. The variable 'dir' is an integer, and 'directions' is a char pointer array. This incorrect syntax should be 'directions[dir]', using 'dir' as the index into the 'directions' array. Fix this by correcting the array access from 'dir[directions]' to 'directions[dir]'. Signed-off-by: Zhang Chujun <zhangchujun(a)cmss.chinamobile.com> diff --git a/tools/testing/selftests/dma/dma_map_benchmark.c b/tools/testing/selftests/dma/dma_map_benchmark.c index b12f1f9babf8..b925756373ce 100644 --- a/tools/testing/selftests/dma/dma_map_benchmark.c +++ b/tools/testing/selftests/dma/dma_map_benchmark.c @@ -118,7 +118,7 @@ int main(int argc, char **argv) } printf("dma mapping benchmark: threads:%d seconds:%d node:%d dir:%s granule: %d\n", - threads, seconds, node, dir[directions], granule); + threads, seconds, node, directions[dir], granule); printf("average map latency(us):%.1f standard deviation:%.1f\n", map.avg_map_100ns/10.0, map.map_stddev/10.0); printf("average unmap latency(us):%.1f standard deviation:%.1f\n", -- 2.50.1.windows.1

1 month

2
1
0 0

[PATCH v6 0/3] drivers/base: Introduce revocable

by Tzung-Bi Shih

The series is separated from [1] to show the independency and compare potential use cases easier. This is the revocable core part. Use cases are in other series. The 1st patch introduces the revocable which is an implementation of ideas from the talk [2]. The 2nd and 3rd patches add test cases for revocable in Kunit and selftest. [1] https://lore.kernel.org/chrome-platform/20251016054204.1523139-1-tzungbi@ke… [2] https://lpc.events/event/17/contributions/1627/ v6: - Rebase onto next-20251106. - Separate revocable core and use cases. v5: https://lore.kernel.org/chrome-platform/20251016054204.1523139-1-tzungbi@ke… - Rebase onto next-20251015. - Add more context about the PoC. - Support multiple revocable providers in the PoC. v4: https://lore.kernel.org/chrome-platform/20250923075302.591026-1-tzungbi@ker… - Rebase onto next-20250922. - Remove the 5th patch from v3. - Add fops replacement PoC in 5th - 7th patches. v3: https://lore.kernel.org/chrome-platform/20250912081718.3827390-1-tzungbi@ke… - Rebase onto https://lore.kernel.org/chrome-platform/20250828083601.856083-1-tzungbi@ker… and next-20250912. - The 4th patch changed accordingly. v2: https://lore.kernel.org/chrome-platform/20250820081645.847919-1-tzungbi@ker… - Rename "ref_proxy" -> "revocable". - Add test cases in Kunit and selftest. v1: https://lore.kernel.org/chrome-platform/20250814091020.1302888-1-tzungbi@ke… Tzung-Bi Shih (3): revocable: Revocable resource management revocable: Add Kunit test cases selftests: revocable: Add kselftest cases .../driver-api/driver-model/index.rst | 1 + .../driver-api/driver-model/revocable.rst | 112 +++++++++ MAINTAINERS | 9 + drivers/base/Kconfig | 8 + drivers/base/Makefile | 5 +- drivers/base/revocable.c | 234 ++++++++++++++++++ drivers/base/revocable_test.c | 139 +++++++++++ include/linux/revocable.h | 69 ++++++ tools/testing/selftests/Makefile | 1 + .../selftests/drivers/base/revocable/Makefile | 7 + .../drivers/base/revocable/revocable_test.c | 136 ++++++++++ .../drivers/base/revocable/test-revocable.sh | 39 +++ .../base/revocable/test_modules/Makefile | 10 + .../revocable/test_modules/revocable_test.c | 195 +++++++++++++++ 14 files changed, 964 insertions(+), 1 deletion(-) create mode 100644 Documentation/driver-api/driver-model/revocable.rst create mode 100644 drivers/base/revocable.c create mode 100644 drivers/base/revocable_test.c create mode 100644 include/linux/revocable.h create mode 100644 tools/testing/selftests/drivers/base/revocable/Makefile create mode 100644 tools/testing/selftests/drivers/base/revocable/revocable_test.c create mode 100755 tools/testing/selftests/drivers/base/revocable/test-revocable.sh create mode 100644 tools/testing/selftests/drivers/base/revocable/test_modules/Makefile create mode 100644 tools/testing/selftests/drivers/base/revocable/test_modules/revocable_test.c -- 2.48.1

1 month

2
4
0 0

[PATCH net] bonding: fix NULL pointer dereference in actor_port_prio setting

by Hangbin Liu

Liang reported an issue where setting a slave’s actor_port_prio to predefined values such as 0, 255, or 65535 would cause a system crash. The problem occurs because in bond_opt_parse(), when the provided value matches a predefined table entry, the function returns that table entry, which does not contain slave information. Later, in bond_option_actor_port_prio_set(), calling bond_slave_get_rtnl() leads to a NULL pointer dereference. Since actor_port_prio is defined as a u16 and initialized to the default value of 255 in ad_initialize_port(), there is no need for the bond_actor_port_prio_tbl. Using the BOND_OPTFLAG_RAWVAL flag is sufficient. Fixes: 6b6dc81ee7e8 ("bonding: add support for per-port LACP actor priority") Reported-by: Liang Li <liali(a)redhat.com> Signed-off-by: Hangbin Liu <liuhangbin(a)gmail.com> --- BTW, the logic in bond_opt_parse() may also need an update after we have f2b3b28ce523 ("bonding: add slave_dev field for bond_opt_value"), as we may need range checking on slave options in future. But this should be another patch and not urgent as this one. --- drivers/net/bonding/bond_options.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/drivers/net/bonding/bond_options.c b/drivers/net/bonding/bond_options.c index 495a87f2ea7c..384499c869b8 100644 --- a/drivers/net/bonding/bond_options.c +++ b/drivers/net/bonding/bond_options.c @@ -225,13 +225,6 @@ static const struct bond_opt_value bond_ad_actor_sys_prio_tbl[] = { { NULL, -1, 0}, }; -static const struct bond_opt_value bond_actor_port_prio_tbl[] = { - { "minval", 0, BOND_VALFLAG_MIN}, - { "maxval", 65535, BOND_VALFLAG_MAX}, - { "default", 255, BOND_VALFLAG_DEFAULT}, - { NULL, -1, 0}, -}; - static const struct bond_opt_value bond_ad_user_port_key_tbl[] = { { "minval", 0, BOND_VALFLAG_MIN | BOND_VALFLAG_DEFAULT}, { "maxval", 1023, BOND_VALFLAG_MAX}, @@ -497,7 +490,7 @@ static const struct bond_option bond_opts[BOND_OPT_LAST] = { .id = BOND_OPT_ACTOR_PORT_PRIO, .name = "actor_port_prio", .unsuppmodes = BOND_MODE_ALL_EX(BIT(BOND_MODE_8023AD)), - .values = bond_actor_port_prio_tbl, + .flags = BOND_OPTFLAG_RAWVAL, .set = bond_option_actor_port_prio_set, }, [BOND_OPT_AD_ACTOR_SYSTEM] = { -- 2.50.1

1 month

2
1
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror November 2025