January 2025 - Linux-kselftest-mirror

[PATCH] selftests/rseq: Fix handling of glibc without rseq support

by Mathieu Desnoyers

When porting librseq commit: commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection") from librseq to the kernel selftests, the following line was missed at the end of rseq_init(): rseq_size = get_rseq_kernel_feature_size(); which effectively leaves rseq_size initialized to -1U when glibc does not have rseq support. glibc supports rseq from version 2.35 onwards. In a following librseq commit commit c67d198627c2 ("Only set 'rseq_size' on first thread registration") to mimic the libc behavior, a new approach is taken: don't set the feature size in 'rseq_size' until at least one thread has successfully registered. This allows using 'rseq_size' in fast-paths to test for both registration status and available features. The caveat is that on libc either all threads are registered or none are, while with bare librseq it is the responsability of the user to register all threads using rseq. This combines the changes from the following librseq commits: commit c7b45750fa85 ("Adapt to glibc __rseq_size feature detection") commit c67d198627c2 ("Only set 'rseq_size' on first thread registration") Fixes: 73a4f5a704a2 ("selftests/rseq: Fix mm_cid test failure") Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> Cc: Raghavendra Rao Ananta <rananta(a)google.com> Cc: Shuah Khan <skhan(a)linuxfoundation.org> Cc: Peter Zijlstra <peterz(a)infradead.org> Cc: Boqun Feng <boqun.feng(a)gmail.com> Cc: "Paul E. McKenney" <paulmck(a)kernel.org> Cc: Carlos O'Donell <carlos(a)redhat.com> Cc: Florian Weimer <fweimer(a)redhat.com> Cc: Michael Jeanson <mjeanson(a)efficios.com> Cc: linux-kselftest(a)vger.kernel.org Cc: stable(a)vger.kernel.org --- tools/testing/selftests/rseq/rseq.c | 32 ++++++++++++++++++++++------- tools/testing/selftests/rseq/rseq.h | 9 +++++++- 2 files changed, 33 insertions(+), 8 deletions(-) diff --git a/tools/testing/selftests/rseq/rseq.c b/tools/testing/selftests/rseq/rseq.c index 5b9772cdf265..f6156790c3b4 100644 --- a/tools/testing/selftests/rseq/rseq.c +++ b/tools/testing/selftests/rseq/rseq.c @@ -61,7 +61,6 @@ unsigned int rseq_size = -1U; unsigned int rseq_flags; static int rseq_ownership; -static int rseq_reg_success; /* At least one rseq registration has succeded. */ /* Allocate a large area for the TLS. */ #define RSEQ_THREAD_AREA_ALLOC_SIZE 1024 @@ -152,14 +151,27 @@ int rseq_register_current_thread(void) } rc = sys_rseq(&__rseq_abi, get_rseq_min_alloc_size(), 0, RSEQ_SIG); if (rc) { - if (RSEQ_READ_ONCE(rseq_reg_success)) { + /* + * After at least one thread has registered successfully + * (rseq_size > 0), the registration of other threads should + * never fail. + */ + if (RSEQ_READ_ONCE(rseq_size) > 0) { /* Incoherent success/failure within process. */ abort(); } return -1; } assert(rseq_current_cpu_raw() >= 0); - RSEQ_WRITE_ONCE(rseq_reg_success, 1); + + /* + * The first thread to register sets the rseq_size to mimic the libc + * behavior. + */ + if (RSEQ_READ_ONCE(rseq_size) == 0) { + RSEQ_WRITE_ONCE(rseq_size, get_rseq_kernel_feature_size()); + } + return 0; } @@ -235,12 +247,18 @@ void rseq_init(void) return; } rseq_ownership = 1; - if (!rseq_available()) { - rseq_size = 0; - return; - } + + /* Calculate the offset of the rseq area from the thread pointer. */ rseq_offset = (void *)&__rseq_abi - rseq_thread_pointer(); + + /* rseq flags are deprecated, always set to 0. */ rseq_flags = 0; + + /* + * Set the size to 0 until at least one thread registers to mimic the + * libc behavior. + */ + rseq_size = 0; } static __attribute__((destructor)) diff --git a/tools/testing/selftests/rseq/rseq.h b/tools/testing/selftests/rseq/rseq.h index 4e217b620e0c..062d10925a10 100644 --- a/tools/testing/selftests/rseq/rseq.h +++ b/tools/testing/selftests/rseq/rseq.h @@ -60,7 +60,14 @@ extern ptrdiff_t rseq_offset; /* - * Size of the registered rseq area. 0 if the registration was + * The rseq ABI is composed of extensible feature fields. The extensions + * are done by appending additional fields at the end of the structure. + * The rseq_size defines the size of the active feature set which can be + * used by the application for the current rseq registration. Features + * starting at offset >= rseq_size are inactive and should not be used. + * + * The rseq_size is the intersection between the available allocation + * size for the rseq area and the feature size supported by the kernel. * unsuccessful. */ extern unsigned int rseq_size; -- 2.39.5

8 months

2
4
0 0

[PATCH] selftests/bpf: Fix test_xdp_adjust_tail_grow2 selftest on powerpc

by Saket Kumar Bhaskar

On powerpc cache line size is 128 bytes, so skb_shared_info must be aligned accordingly. Signed-off-by: Saket Kumar Bhaskar <skb99(a)linux.ibm.com> --- tools/testing/selftests/bpf/prog_tests/xdp_adjust_tail.c | 2 ++ tools/testing/selftests/bpf/progs/test_xdp_adjust_tail_grow.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/tools/testing/selftests/bpf/prog_tests/xdp_adjust_tail.c b/tools/testing/selftests/bpf/prog_tests/xdp_adjust_tail.c index 53d6ad8c2257..b2b2d85dbb1b 100644 --- a/tools/testing/selftests/bpf/prog_tests/xdp_adjust_tail.c +++ b/tools/testing/selftests/bpf/prog_tests/xdp_adjust_tail.c @@ -82,6 +82,8 @@ static void test_xdp_adjust_tail_grow2(void) /* SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) */ #if defined(__s390x__) int tailroom = 512; +#elif defined(__powerpc__) + int tailroom = 384; #else int tailroom = 320; #endif diff --git a/tools/testing/selftests/bpf/progs/test_xdp_adjust_tail_grow.c b/tools/testing/selftests/bpf/progs/test_xdp_adjust_tail_grow.c index 81bb38d72ced..dc74d8cf9e3f 100644 --- a/tools/testing/selftests/bpf/progs/test_xdp_adjust_tail_grow.c +++ b/tools/testing/selftests/bpf/progs/test_xdp_adjust_tail_grow.c @@ -10,6 +10,8 @@ int _xdp_adjust_tail_grow(struct xdp_md *xdp) /* SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) */ #if defined(__TARGET_ARCH_s390) int tailroom = 512; +#elif defined(__TARGET_ARCH_powerpc) + int tailroom = 384; #else int tailroom = 320; #endif -- 2.43.5

8 months

2
1
0 0

[PATCH v5 0/2] riscv/ptrace: add new regset to access original a0 register

by Celeste Liu

The orig_a0 is missing in struct user_regs_struct of riscv, and there is no way to add it without breaking UAPI. (See Link tag below) Like NT_ARM_SYSTEM_CALL do, we add a new regset name NT_RISCV_ORIG_A0 to access original a0 register from userspace via ptrace API. Link: https://lore.kernel.org/all/59505464-c84a-403d-972f-d4b2055eeaac@gmail.com/ Signed-off-by: Celeste Liu <uwu(a)coelacanthus.name> --- Changes in v5: - Fix wrong usage in selftests. - Link to v4: https://lore.kernel.org/r/20241226-riscv-new-regset-v4-0-4496a29d0436@coela… Changes in v4: - Fix a copy paste error in selftest. (Forget to commit...) - Link to v3: https://lore.kernel.org/r/20241226-riscv-new-regset-v3-0-f5b96465826b@coela… Changes in v3: - Use return 0 directly for readability. - Fix test for modify a0. - Add Fixes: tag - Remove useless Cc: stable. - Selftest will check both a0 and orig_a0, but depends on the correctness of PTRACE_GET_SYSCALL_INFO. - Link to v2: https://lore.kernel.org/r/20241203-riscv-new-regset-v2-0-d37da8c0cba6@coela… Changes in v2: - Fix integer width. - Add selftest. - Link to v1: https://lore.kernel.org/r/20241201-riscv-new-regset-v1-1-c83c58abcc7b@coela… --- Celeste Liu (2): riscv/ptrace: add new regset to access original a0 register riscv: selftests: Add a ptrace test to verify a0 and orig_a0 access arch/riscv/kernel/ptrace.c | 32 +++++ include/uapi/linux/elf.h | 1 + tools/testing/selftests/riscv/abi/.gitignore | 1 + tools/testing/selftests/riscv/abi/Makefile | 6 +- tools/testing/selftests/riscv/abi/ptrace.c | 201 +++++++++++++++++++++++++++ 5 files changed, 240 insertions(+), 1 deletion(-) --- base-commit: 0e287d31b62bb53ad81d5e59778384a40f8b6f56 change-id: 20241201-riscv-new-regset-d529b952ad0d Best regards, -- Celeste Liu <uwu(a)coelacanthus.name>

8 months

2
6
0 0

[PATCH] selftests/ptrace/get_syscall_info: fix for MIPS n32

by Dmitry V. Levin

MIPS n32 is one of two ILP32 architectures supported by the kernel that have 64-bit syscall arguments (another one is x32). When this test passed 32-bit arguments to syscall(), they were sign-extended in libc, PTRACE_GET_SYSCALL_INFO reported these sign-extended 64-bit values, and the test complained about the mismatch. Fix this by passing arguments of the appropriate type to syscall(), which is "unsigned long long" on MIPS n32, and __kernel_ulong_t on other architectures. As a side effect, this also extends the test on all 64-bit architectures by choosing constants that don't fit into 32-bit integers. Signed-off-by: Dmitry V. Levin <ldv(a)strace.io> --- .../selftests/ptrace/get_syscall_info.c | 53 +++++++++++-------- 1 file changed, 32 insertions(+), 21 deletions(-) diff --git a/tools/testing/selftests/ptrace/get_syscall_info.c b/tools/testing/selftests/ptrace/get_syscall_info.c index 5bcd1c7b5be6..812f64d15955 100644 --- a/tools/testing/selftests/ptrace/get_syscall_info.c +++ b/tools/testing/selftests/ptrace/get_syscall_info.c @@ -11,8 +11,19 @@ #include <err.h> #include <signal.h> #include <asm/unistd.h> +#include <linux/types.h> #include "linux/ptrace.h" +#if defined(__mips__) && defined(_ABIN32) +/* + * MIPS N32 is the only architecture where __kernel_ulong_t + * does not match the bitness of syscall arguments. + */ +typedef unsigned long long kernel_ulong_t; +#else +typedef __kernel_ulong_t kernel_ulong_t; +#endif + static int kill_tracee(pid_t pid) { @@ -42,37 +53,37 @@ sys_ptrace(int request, pid_t pid, unsigned long addr, unsigned long data) TEST(get_syscall_info) { - static const unsigned long args[][7] = { + const kernel_ulong_t args[][7] = { /* a sequence of architecture-agnostic syscalls */ { __NR_chdir, - (unsigned long) "", - 0xbad1fed1, - 0xbad2fed2, - 0xbad3fed3, - 0xbad4fed4, - 0xbad5fed5 + (uintptr_t) "", + (kernel_ulong_t) 0xdad1bef1bad1fed1ULL, + (kernel_ulong_t) 0xdad2bef2bad2fed2ULL, + (kernel_ulong_t) 0xdad3bef3bad3fed3ULL, + (kernel_ulong_t) 0xdad4bef4bad4fed4ULL, + (kernel_ulong_t) 0xdad5bef5bad5fed5ULL }, { __NR_gettid, - 0xcaf0bea0, - 0xcaf1bea1, - 0xcaf2bea2, - 0xcaf3bea3, - 0xcaf4bea4, - 0xcaf5bea5 + (kernel_ulong_t) 0xdad0bef0caf0bea0ULL, + (kernel_ulong_t) 0xdad1bef1caf1bea1ULL, + (kernel_ulong_t) 0xdad2bef2caf2bea2ULL, + (kernel_ulong_t) 0xdad3bef3caf3bea3ULL, + (kernel_ulong_t) 0xdad4bef4caf4bea4ULL, + (kernel_ulong_t) 0xdad5bef5caf5bea5ULL }, { __NR_exit_group, 0, - 0xfac1c0d1, - 0xfac2c0d2, - 0xfac3c0d3, - 0xfac4c0d4, - 0xfac5c0d5 + (kernel_ulong_t) 0xdad1bef1fac1c0d1ULL, + (kernel_ulong_t) 0xdad2bef2fac2c0d2ULL, + (kernel_ulong_t) 0xdad3bef3fac3c0d3ULL, + (kernel_ulong_t) 0xdad4bef4fac4c0d4ULL, + (kernel_ulong_t) 0xdad5bef5fac5c0d5ULL } }; - const unsigned long *exp_args; + const kernel_ulong_t *exp_args; pid_t pid = fork(); @@ -154,7 +165,7 @@ TEST(get_syscall_info) } ASSERT_LT(0, (rc = sys_ptrace(PTRACE_GET_SYSCALL_INFO, pid, size, - (unsigned long) &info))) { + (uintptr_t) &info))) { LOG_KILL_TRACEE("PTRACE_GET_SYSCALL_INFO: %m"); } ASSERT_EQ(expected_none_size, rc) { @@ -177,7 +188,7 @@ TEST(get_syscall_info) case SIGTRAP | 0x80: ASSERT_LT(0, (rc = sys_ptrace(PTRACE_GET_SYSCALL_INFO, pid, size, - (unsigned long) &info))) { + (uintptr_t) &info))) { LOG_KILL_TRACEE("PTRACE_GET_SYSCALL_INFO: %m"); } switch (ptrace_stop) { -- ldv

8 months

1
0
0 0

[PATCH v8 0/2] selftests/resctrl: SNC kernel support discovery

by Maciej Wieczor-Retman

Changes v8: - Fix Makefile changes. - Update cover letter SNC status information. - Add Reinette's reviewed by tag to patch 2/2. Changes v7: - Include fallthrough in resctrlfs.c. - Check fp after opening empty cpus file. - Correct a comment and merge strings in snprintf(). Changes v6: - Rebase onto latest kselftest-next. - Looking at the two patches with a fresh eye decided to make a split along the lines of: - Patch 1/2 contains all of the code that relates to SNC mode detection and checking that detection's reliability. - Patch 2/2 contains checking kernel support for SNC and modifying the messages at the end of affected tests. Changes v5: - Tests are skipped if snc_unreliable was set. - Moved resctrlfs.c changes from patch 2/2 to 1/2. - Removed CAT changes since it's not impacted by SNC in the selftest. - Updated various comments. - Fixed a bunch of minor issues pointed out in the review. Changes v4: - Printing SNC warnings at the start of every test. - Printing SNC warnings at the end of every relevant test. - Remove global snc_mode variable, consolidate snc detection functions into one. - Correct minor mistakes. Changes v3: - Reworked patch 2. - Changed minor things in patch 1 like function name and made corrections to the patch message. Changes v2: - Removed patches 2 and 3 since now this part will be supported by the kernel. Sub-Numa Clustering (SNC) allows splitting CPU cores, caches and memory into multiple NUMA nodes. When enabled, NUMA-aware applications can achieve better performance on bigger server platforms. SNC support was merged into the kernel [1]. With SNC enabled and kernel support in place all the tests will function normally (aside from effective cache size). There might be a problem when SNC is enabled but the system is still using an older kernel version without SNC support. Currently the only message displayed in that situation is a guess that SNC might be enabled and is causing issues. That message also is displayed whenever the test fails on an Intel platform. Add a mechanism to discover kernel support for SNC which will add more meaning and certainty to the error message. Add runtime SNC mode detection and verify how reliable that information is. Series was tested on Ice Lake server platforms with SNC disabled, SNC-2 and SNC-4. The tests were also ran with and without kernel support for SNC. Series applies cleanly on kselftest/next. [1] https://lore.kernel.org/all/20240716065458.GAZpYZQhh0PBItpD1k@fat_crate.loc… Previous versions of this series: [v1] https://lore.kernel.org/all/cover.1709721159.git.maciej.wieczor-retman@inte… [v2] https://lore.kernel.org/all/cover.1715769576.git.maciej.wieczor-retman@inte… [v3] https://lore.kernel.org/all/cover.1719842207.git.maciej.wieczor-retman@inte… [v4] https://lore.kernel.org/all/cover.1720774981.git.maciej.wieczor-retman@inte… [v5] https://lore.kernel.org/all/cover.1730206468.git.maciej.wieczor-retman@inte… [v6] https://lore.kernel.org/all/cover.1733136454.git.maciej.wieczor-retman@inte… [v7] https://lore.kernel.org/all/cover.1733741950.git.maciej.wieczor-retman@inte… Maciej Wieczor-Retman (2): selftests/resctrl: Adjust effective L3 cache size with SNC enabled selftests/resctrl: Discover SNC kernel support and adjust messages tools/testing/selftests/resctrl/Makefile | 1 + tools/testing/selftests/resctrl/cmt_test.c | 4 +- tools/testing/selftests/resctrl/mba_test.c | 2 + tools/testing/selftests/resctrl/mbm_test.c | 4 +- tools/testing/selftests/resctrl/resctrl.h | 6 + .../testing/selftests/resctrl/resctrl_tests.c | 9 +- tools/testing/selftests/resctrl/resctrlfs.c | 137 ++++++++++++++++++ 7 files changed, 158 insertions(+), 5 deletions(-) -- 2.47.1

8 months

3
9
0 0

[PATCH v2] kunit: Introduce autorun option

by Stanislav Kinsburskii

The new option controls tests run on boot or module load. With the new debugfs "run" dentry allowing to run tests on demand, an ability to disable automatic tests run becomes a useful option in case of intrusive tests. The option is set to true by default to preserve the existent behavior. It can be overridden by either the corresponding module option or by the corresponding config build option. Signed-off-by: Stanislav Kinsburskii <skinsburskii(a)linux.microsoft.com> --- include/kunit/test.h | 4 +++- lib/kunit/Kconfig | 12 ++++++++++++ lib/kunit/debugfs.c | 2 +- lib/kunit/executor.c | 21 +++++++++++++++++++-- lib/kunit/test.c | 6 ++++-- 5 files changed, 39 insertions(+), 6 deletions(-) diff --git a/include/kunit/test.h b/include/kunit/test.h index 34b71e42fb10..58dbab60f853 100644 --- a/include/kunit/test.h +++ b/include/kunit/test.h @@ -312,6 +312,7 @@ static inline void kunit_set_failure(struct kunit *test) } bool kunit_enabled(void); +bool kunit_autorun(void); const char *kunit_action(void); const char *kunit_filter_glob(void); char *kunit_filter(void); @@ -334,7 +335,8 @@ kunit_filter_suites(const struct kunit_suite_set *suite_set, int *err); void kunit_free_suite_set(struct kunit_suite_set suite_set); -int __kunit_test_suites_init(struct kunit_suite * const * const suites, int num_suites); +int __kunit_test_suites_init(struct kunit_suite * const * const suites, int num_suites, + bool run_tests); void __kunit_test_suites_exit(struct kunit_suite **suites, int num_suites); diff --git a/lib/kunit/Kconfig b/lib/kunit/Kconfig index 34d7242d526d..a97897edd964 100644 --- a/lib/kunit/Kconfig +++ b/lib/kunit/Kconfig @@ -81,4 +81,16 @@ config KUNIT_DEFAULT_ENABLED In most cases this should be left as Y. Only if additional opt-in behavior is needed should this be set to N. +config KUNIT_AUTORUN_ENABLED + bool "Default value of kunit.autorun" + default y + help + Sets the default value of kunit.autorun. If set to N then KUnit + tests will not run after initialization unless kunit.autorun=1 is + passed to the kernel command line. The test can still be run manually + via debugfs interface. + + In most cases this should be left as Y. Only if additional opt-in + behavior is needed should this be set to N. + endif # KUNIT diff --git a/lib/kunit/debugfs.c b/lib/kunit/debugfs.c index d548750a325a..9df064f40d98 100644 --- a/lib/kunit/debugfs.c +++ b/lib/kunit/debugfs.c @@ -145,7 +145,7 @@ static ssize_t debugfs_run(struct file *file, struct inode *f_inode = file->f_inode; struct kunit_suite *suite = (struct kunit_suite *) f_inode->i_private; - __kunit_test_suites_init(&suite, 1); + __kunit_test_suites_init(&suite, 1, true); return count; } diff --git a/lib/kunit/executor.c b/lib/kunit/executor.c index 34b7b6833df3..3f39955cb0f1 100644 --- a/lib/kunit/executor.c +++ b/lib/kunit/executor.c @@ -29,6 +29,22 @@ const char *kunit_action(void) return action_param; } +/* + * Run KUnit tests after initialization + */ +#ifdef CONFIG_KUNIT_AUTORUN_ENABLED +static bool autorun_param = true; +#else +static bool autorun_param; +#endif +module_param_named(autorun, autorun_param, bool, 0); +MODULE_PARM_DESC(autorun, "Run KUnit tests after initialization"); + +bool kunit_autorun(void) +{ + return autorun_param; +} + static char *filter_glob_param; static char *filter_param; static char *filter_action_param; @@ -260,13 +276,14 @@ kunit_filter_suites(const struct kunit_suite_set *suite_set, void kunit_exec_run_tests(struct kunit_suite_set *suite_set, bool builtin) { size_t num_suites = suite_set->end - suite_set->start; + bool autorun = kunit_autorun(); - if (builtin || num_suites) { + if (autorun && (builtin || num_suites)) { pr_info("KTAP version 1\n"); pr_info("1..%zu\n", num_suites); } - __kunit_test_suites_init(suite_set->start, num_suites); + __kunit_test_suites_init(suite_set->start, num_suites, autorun); } void kunit_exec_list_tests(struct kunit_suite_set *suite_set, bool include_attr) diff --git a/lib/kunit/test.c b/lib/kunit/test.c index 089c832e3cdb..146d1b48a096 100644 --- a/lib/kunit/test.c +++ b/lib/kunit/test.c @@ -708,7 +708,8 @@ bool kunit_enabled(void) return enable_param; } -int __kunit_test_suites_init(struct kunit_suite * const * const suites, int num_suites) +int __kunit_test_suites_init(struct kunit_suite * const * const suites, int num_suites, + bool run_tests) { unsigned int i; @@ -731,7 +732,8 @@ int __kunit_test_suites_init(struct kunit_suite * const * const suites, int num_ for (i = 0; i < num_suites; i++) { kunit_init_suite(suites[i]); - kunit_run_tests(suites[i]); + if (run_tests) + kunit_run_tests(suites[i]); } static_branch_dec(&kunit_running);

8 months

3
2
0 0

[PATCH for-next v2] selftests/Makefile: override the srctree for out-of-tree builds

by Li Zhijian

Fixes an issue where out-of-tree kselftest builds fail when building the BPF and bpftools components. The failure occurs because the top-level Makefile passes a relative srctree path to its sub-Makefiles, which leads to errors in locating necessary files. For example, the following error is encountered: ``` $ make V=1 O=$build/ TARGETS=hid kselftest-all ... make -C ../tools/testing/selftests all make[4]: Entering directory '/path/to/linux/tools/testing/selftests/hid' make -C /path/to/linux/tools/testing/selftests/../../../tools/lib/bpf OUTPUT=/path/to/linux/O/kselftest/hid/tools/build/libbpf/ \ EXTRA_CFLAGS='-g -O0' \ DESTDIR=/path/to/linux/O/kselftest/hid/tools prefix= all install_headers make[5]: Entering directory '/path/to/linux/tools/lib/bpf' ... make[5]: Entering directory '/path/to/linux/tools/bpf/bpftool' Makefile:127: ../tools/build/Makefile.feature: No such file or directory make[5]: *** No rule to make target '../tools/build/Makefile.feature'. Stop. ``` To resolve this, override the srctree in the kselftests's top Makefile when performing an out-of-tree build. This ensures that all sub-Makefiles have the correct path to the source tree, preventing directory resolution errors. Signed-off-by: Li Zhijian <lizhijian(a)fujitsu.com> --- Cc: Masahiro Yamada <masahiroy(a)kernel.org> V2: - handle srctree in selftests itself rather than the linux' top Makefile # Masahiro Yamada <masahiroy(a)kernel.org> V1: https://lore.kernel.org/lkml/20241217031052.69744-1-lizhijian@fujitsu.com/ --- tools/testing/selftests/Makefile | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 3d8a80abd4f0..ab82278353cf 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -154,15 +154,19 @@ override LDFLAGS = override MAKEFLAGS = endif +top_srcdir ?= ../../.. + # Append kselftest to KBUILD_OUTPUT and O to avoid cluttering # KBUILD_OUTPUT with selftest objects and headers installed # by selftests Makefile or lib.mk. +# Override the `srctree` variable to ensure it is correctly resolved in +# sub-Makefiles, such as those within `bpf`, when managing targets like +# `net` and `hid`. ifdef building_out_of_srctree override LDFLAGS = +override srctree := $(top_srcdir) endif -top_srcdir ?= ../../.. - ifeq ("$(origin O)", "command line") KBUILD_OUTPUT := $(O) endif -- 2.44.0

8 months

4
3
0 0

[PATCH net-next 0/1] selftests: drv-net-hw: fix pp_alloc_fail test error

by John Daley

The tool pp_alloc_fail.py tested error recovery by injecting errors into page_pool_alloc_pages(). Perhaps due to the netmems conversion, page_pool_put_full_page() does not end up calling that function. page_pool_alloc_netmems() seems to be the base function for all the the allocation functions in the API call, so put the error injection there instead. Signed-off-by: John Daley <johndale(a)cisco.com> John Daley (1): page_pool: inject pp_alloc_fail errors in the right place net/core/page_pool.c | 2 +- tools/testing/selftests/drivers/net/hw/pp_alloc_fail.py | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) -- 2.44.0

8 months

2
2
0 0

[RFC PATCH v1 0/2] Add file seal to prevent future exec mappings

by Isaac J. Manjarres

Android uses the ashmem driver [1] for creating shared memory regions between processes. The ashmem driver exposes an ioctl command for processes to restrict the permissions an ashmem buffer can be mapped with. Buffers are created with the ability to be mapped as readable, writable, and executable. Processes remove the ability to map some ashmem buffers as executable to ensure that those buffers cannot be exploited to run unintended code. Other buffers retain their ability to be mapped as executable, as these buffers can be used for just-in-time (JIT) compilation. So there is a need to be able to remove the ability to map a buffer as executable on a per-buffer basis. Android is currently trying to migrate towards replacing its ashmem driver usage with memfd. Part of the transition involved introducing a library that serves to abstract away how shared memory regions are allocated (i.e. ashmem vs memfd). This allows clients to use a single interface for restricting how a buffer can be mapped without having to worry about how it is handled for ashmem (through the ioctl command mentioned earlier) or memfd (through file seals). While memfd has support for preventing buffers from being mapped as writable beyond a certain point in time (thanks to F_SEAL_FUTURE_WRITE), it does not have a similar interface to prevent buffers from being mapped as executable beyond a certain point. However, that could be implemented as a file seal (F_SEAL_FUTURE_EXEC) which works similarly to F_SEAL_FUTURE_WRITE. F_SEAL_FUTURE_WRITE was chosen as a template for how this new seal should behave, instead of F_SEAL_WRITE, for the following reasons: 1. Having the new seal behave like F_SEAL_FUTURE_WRITE matches the behavior that was present with ashmem. This aids in seamlessly transitioning clients away from ashmem to memfd. 2. Making the new seal behave like F_SEAL_WRITE would mean that no mappings that could become executable in the future (i.e. via mprotect()) can exist when the seal is applied. However, there are known cases (e.g. CursorWindow [2]) where restrictions are applied on how a buffer can be mapped after a mapping has already been made. That mapping may have VM_MAYEXEC set, which would not allow the seal to be applied successfully. Therefore, the F_SEAL_FUTURE_EXEC seal was designed to have the same semantics as F_SEAL_FUTURE_WRITE. Note: this series depends on Lorenzo's work [3] which allows for a memfd's file seals to be read in do_mmap(). [1] https://cs.android.com/android/kernel/superproject/+/common-android-mainlin… [2] https://developer.android.com/reference/android/database/CursorWindow [3] https://lore.kernel.org/all/cover.1732804776.git.lorenzo.stoakes@oracle.com/ Isaac J. Manjarres (2): mm/memfd: Add support for F_SEAL_FUTURE_EXEC to memfd selftests/memfd: Add tests for F_SEAL_FUTURE_EXEC include/linux/mm.h | 5 ++ include/uapi/linux/fcntl.h | 1 + mm/memfd.c | 1 + mm/mmap.c | 11 +++ tools/testing/selftests/memfd/memfd_test.c | 79 ++++++++++++++++++++++ 5 files changed, 97 insertions(+) -- 2.47.0.338.g60cca15819-goog

8 months

7
19
0 0

[PATCH net 0/3] mptcp: fixes for connect selftest flakes

by Matthieu Baerts (NGI0)

Last week, Jakub reported [1] that the MPTCP Connect selftest was unstable. It looked like it started after the introduction of some fixes [2]. After analysis from Paolo, these patches revealed existing bugs, that should be fixed by the following patches. - Patch 1: Make sure ACK are sent when MPTCP-level window re-opens. In some corner cases, the other peer was not notified when more data could be sent. A fix for v5.11, but depending on a feature introduced in v5.19. - Patch 2: Fix spurious wake-up under memory pressure. In this situation, the userspace could be invited to read data not being there yet. A fix for v6.7. - Patch 3: Fix a false positive error when running the MPTCP Connect selftest with the "disconnect" cases. The userspace could disconnect the socket too soon, which would reset (MP_FASTCLOSE) the connection, interpreted as an error by the test. A fix for v5.17. Link: https://lore.kernel.org/20250107131845.5e5de3c5@kernel.org [1] Link: https://lore.kernel.org/20241230-net-mptcp-rbuf-fixes-v1-0-8608af434ceb@ker… [2] Signed-off-by: Matthieu Baerts (NGI0) <matttbe(a)kernel.org> --- Paolo Abeni (3): mptcp: be sure to send ack when mptcp-level window re-opens mptcp: fix spurious wake-up on under memory pressure selftests: mptcp: avoid spurious errors on disconnect net/mptcp/options.c | 6 ++-- net/mptcp/protocol.h | 9 +++-- tools/testing/selftests/net/mptcp/mptcp_connect.c | 43 +++++++++++++++++------ 3 files changed, 43 insertions(+), 15 deletions(-) --- base-commit: 76201b5979768500bca362871db66d77cb4c225e change-id: 20250113-net-mptcp-connect-st-flakes-4af6389808de Best regards, -- Matthieu Baerts (NGI0) <matttbe(a)kernel.org>

8 months

2
4
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror January 2025