If MPLS is not available in the kernel then skip MPLS tests.
This avoids the test failing in situations where the test is not
supported by the underlying kernel.
In the case where all tests are run, just skip over the MPLS tests
without altering the exit code of the overall test run - there
is only one exit code in this scenario.
In the case where a single test is run, exit with KSFT_SKIP (4).
In both cases log an informative message.
Signed-off-by: Simon Horman <horms(a)kernel.org>
---
tools/testing/selftests/bpf/test_tc_tunnel.sh | 22 ++++++++++++++++++++--
1 file changed, 20 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/bpf/test_tc_tunnel.sh b/tools/testing/selftests/bpf/test_tc_tunnel.sh
index 7989ec608454..71cddabc4ade 100755
--- a/tools/testing/selftests/bpf/test_tc_tunnel.sh
+++ b/tools/testing/selftests/bpf/test_tc_tunnel.sh
@@ -102,6 +102,20 @@ wait_for_port() {
return 1
}
+skip_mac() {
+ if [ "$1" = "mpls" ]; then
+ modprobe mpls_iptunnel || true
+ modprobe mpls_gso || true
+
+ if [ ! -e /proc/sys/net/mpls/platform_labels ]; then
+ echo -e "skip: mpls tunnel not supported by kernel\n"
+ return # true
+ fi
+ fi
+
+ false
+}
+
set -e
# no arguments: automated test, run all
@@ -125,6 +139,8 @@ if [[ "$#" -eq "0" ]]; then
$0 ipv6 ip6vxlan eth 2000
for mac in none mpls eth ; do
+ ! skip_mac "$mac" || continue
+
echo "ip gre $mac"
$0 ipv4 gre $mac 100
@@ -193,6 +209,10 @@ readonly tuntype=$2
readonly mac=$3
readonly datalen=$4
+if skip_mac "$mac"; then
+ exit 4 # KSFT_SKIP=4
+fi
+
echo "encap ${addr1} to ${addr2}, type ${tuntype}, mac ${mac} len ${datalen}"
trap cleanup EXIT
@@ -278,8 +298,6 @@ elif [[ "$tuntype" =~ (gre|vxlan) && "$mac" == "eth" ]]; then
awk '/ether/ { print $2 }')
ip netns exec "${ns2}" ip link set testtun0 address $ethaddr
elif [[ "$mac" == "mpls" ]]; then
- modprobe mpls_iptunnel ||true
- modprobe mpls_gso ||true
ip netns exec "${ns2}" sysctl -qw net.mpls.platform_labels=65536
ip netns exec "${ns2}" ip -f mpls route add 1000 dev lo
ip netns exec "${ns2}" ip link set lo up
When cross building kselftest out-of-tree the following issue can be
seen:
[...]
make[4]: Entering directory
'/src/kernel/linux/tools/testing/selftests/net/lib'
CC csum
/usr/lib/gcc-cross/aarch64-linux-gnu/13/../../../../aarch64-linux-gnu/bin/ld:
cannot open output file /tmp/build/kselftest/net/lib/csum: No such
file or directory
collect2: error: ld returned 1 exit status
[...]
Create the output build directory before building the targets, solves
this issue with building 'net/lib/csum'.
Suggested-by: Jakub Kicinski <kuba(a)kernel.org>
Signed-off-by: Anders Roxell <anders.roxell(a)linaro.org>
---
tools/testing/selftests/Makefile | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile
index b38199965f99..05c143bcff6a 100644
--- a/tools/testing/selftests/Makefile
+++ b/tools/testing/selftests/Makefile
@@ -261,6 +261,7 @@ ifdef INSTALL_PATH
@ret=1; \
for TARGET in $(TARGETS) $(INSTALL_DEP_TARGETS); do \
BUILD_TARGET=$$BUILD/$$TARGET; \
+ mkdir -p $$BUILD_TARGET; \
$(MAKE) OUTPUT=$$BUILD_TARGET -C $$TARGET install \
INSTALL_PATH=$(INSTALL_PATH)/$$TARGET \
SRC_PATH=$(shell readlink -e $$(pwd)) \
--
2.45.2
Rename ip_len to payload_len since the length in this case refers only
to the payload, and not the entire IP packet like for IPv4. While we're
at it, just use the variable directly when calling
recv_verify_packet_udp/tcp.
Signed-off-by: Sean Anderson <sean.anderson(a)linux.dev>
---
tools/testing/selftests/net/lib/csum.c | 12 +++++-------
1 file changed, 5 insertions(+), 7 deletions(-)
diff --git a/tools/testing/selftests/net/lib/csum.c b/tools/testing/selftests/net/lib/csum.c
index e0a34e5e8dd5..27437590eeb5 100644
--- a/tools/testing/selftests/net/lib/csum.c
+++ b/tools/testing/selftests/net/lib/csum.c
@@ -675,22 +675,20 @@ static int recv_verify_packet_ipv6(void *nh, int len)
{
struct ipv6hdr *ip6h = nh;
uint16_t proto = cfg_encap ? IPPROTO_UDP : cfg_proto;
- uint16_t ip_len;
+ uint16_t payload_len;
if (len < sizeof(*ip6h) || ip6h->nexthdr != proto)
return -1;
- ip_len = ntohs(ip6h->payload_len);
- if (ip_len > len - sizeof(*ip6h))
+ payload_len = ntohs(ip6h->payload_len);
+ if (payload_len > len - sizeof(*ip6h))
return -1;
- len = ip_len;
iph_addr_p = &ip6h->saddr;
-
if (proto == IPPROTO_TCP)
- return recv_verify_packet_tcp(ip6h + 1, len);
+ return recv_verify_packet_tcp(ip6h + 1, payload_len);
else
- return recv_verify_packet_udp(ip6h + 1, len);
+ return recv_verify_packet_udp(ip6h + 1, payload_len);
}
/* return whether auxdata includes TP_STATUS_CSUM_VALID */
--
2.35.1.1320.gc452695387.dirty
From: Amit Cohen <amcohen(a)nvidia.com>
The test runs "devlink reload" explicitly. Instead, it is better to use
devlink_reload() which waits for udev events to be processed. Do not sleep
after reload, as devlink_reload() blocks until all the netdevs are renamed.
Signed-off-by: Amit Cohen <amcohen(a)nvidia.com>
Reviewed-by: Ido Schimmel <idosch(a)nvidia.com>
Signed-off-by: Petr Machata <petrm(a)nvidia.com>
---
tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh b/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh
index 893a693ad805..45a569618424 100755
--- a/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh
+++ b/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh
@@ -186,10 +186,7 @@ bridge_vlan_flags_test()
# If we did not handle references correctly, then this should produce a
# trace
- devlink dev reload "$DEVLINK_DEV"
-
- # Allow netdevices to be re-created following the reload
- sleep 20
+ devlink_reload
log_test "bridge vlan flags"
}
@@ -923,12 +920,9 @@ devlink_reload_test()
# devlink reload can be performed without errors
RET=0
- devlink dev reload "$DEVLINK_DEV"
- check_err $? "devlink reload failed"
+ devlink_reload
log_test "devlink reload - last test"
-
- sleep 20
}
trap cleanup EXIT
--
2.45.0
The kernel has recently added support for shadow stacks, currently
x86 only using their CET feature but both arm64 and RISC-V have
equivalent features (GCS and Zicfiss respectively), I am actively
working on GCS[1]. With shadow stacks the hardware maintains an
additional stack containing only the return addresses for branch
instructions which is not generally writeable by userspace and ensures
that any returns are to the recorded addresses. This provides some
protection against ROP attacks and making it easier to collect call
stacks. These shadow stacks are allocated in the address space of the
userspace process.
Our API for shadow stacks does not currently offer userspace any
flexiblity for managing the allocation of shadow stacks for newly
created threads, instead the kernel allocates a new shadow stack with
the same size as the normal stack whenever a thread is created with the
feature enabled. The stacks allocated in this way are freed by the
kernel when the thread exits or shadow stacks are disabled for the
thread. This lack of flexibility and control isn't ideal, in the vast
majority of cases the shadow stack will be over allocated and the
implicit allocation and deallocation is not consistent with other
interfaces. As far as I can tell the interface is done in this manner
mainly because the shadow stack patches were in development since before
clone3() was implemented.
Since clone3() is readily extensible let's add support for specifying a
shadow stack when creating a new thread or process in a similar manner
to how the normal stack is specified, keeping the current implicit
allocation behaviour if one is not specified either with clone3() or
through the use of clone(). The user must provide a shadow stack
address and size, this must point to memory mapped for use as a shadow
stackby map_shadow_stack() with a shadow stack token at the top of the
stack.
Please note that the x86 portions of this code are build tested only, I
don't appear to have a system that can run CET avaible to me, I have
done testing with an integration into my pending work for GCS. There is
some possibility that the arm64 implementation may require the use of
clone3() and explicit userspace allocation of shadow stacks, this is
still under discussion.
Please further note that the token consumption done by clone3() is not
currently implemented in an atomic fashion, Rick indicated that he would
look into fixing this if people are OK with the implementation.
A new architecture feature Kconfig option for shadow stacks is added as
here, this was suggested as part of the review comments for the arm64
GCS series and since we need to detect if shadow stacks are supported it
seemed sensible to roll it in here.
[1] https://lore.kernel.org/r/20231009-arm64-gcs-v6-0-78e55deaa4dd@kernel.org/
Signed-off-by: Mark Brown <broonie(a)kernel.org>
---
Changes in v9:
- Pull token validation earlier and report problems with an error return
to parent rather than signal delivery to the child.
- Verify that the top of the supplied shadow stack is VM_SHADOW_STACK.
- Rework token validation to only do the page mapping once.
- Drop no longer needed support for testing for signals in selftest.
- Fix typo in comments.
- Link to v8: https://lore.kernel.org/r/20240808-clone3-shadow-stack-v8-0-0acf37caf14c@ke…
Changes in v8:
- Fix token verification with user specified shadow stack.
- Don't track user managed shadow stacks for child processes.
- Link to v7: https://lore.kernel.org/r/20240731-clone3-shadow-stack-v7-0-a9532eebfb1d@ke…
Changes in v7:
- Rebase onto v6.11-rc1.
- Typo fixes.
- Link to v6: https://lore.kernel.org/r/20240623-clone3-shadow-stack-v6-0-9ee7783b1fb9@ke…
Changes in v6:
- Rebase onto v6.10-rc3.
- Ensure we don't try to free the parent shadow stack in error paths of
x86 arch code.
- Spelling fixes in userspace API document.
- Additional cleanups and improvements to the clone3() tests to support
the shadow stack tests.
- Link to v5: https://lore.kernel.org/r/20240203-clone3-shadow-stack-v5-0-322c69598e4b@ke…
Changes in v5:
- Rebase onto v6.8-rc2.
- Rework ABI to have the user allocate the shadow stack memory with
map_shadow_stack() and a token.
- Force inlining of the x86 shadow stack enablement.
- Move shadow stack enablement out into a shared header for reuse by
other tests.
- Link to v4: https://lore.kernel.org/r/20231128-clone3-shadow-stack-v4-0-8b28ffe4f676@ke…
Changes in v4:
- Formatting changes.
- Use a define for minimum shadow stack size and move some basic
validation to fork.c.
- Link to v3: https://lore.kernel.org/r/20231120-clone3-shadow-stack-v3-0-a7b8ed3e2acc@ke…
Changes in v3:
- Rebase onto v6.7-rc2.
- Remove stale shadow_stack in internal kargs.
- If a shadow stack is specified unconditionally use it regardless of
CLONE_ parameters.
- Force enable shadow stacks in the selftest.
- Update changelogs for RISC-V feature rename.
- Link to v2: https://lore.kernel.org/r/20231114-clone3-shadow-stack-v2-0-b613f8681155@ke…
Changes in v2:
- Rebase onto v6.7-rc1.
- Remove ability to provide preallocated shadow stack, just specify the
desired size.
- Link to v1: https://lore.kernel.org/r/20231023-clone3-shadow-stack-v1-0-d867d0b5d4d0@ke…
---
Mark Brown (8):
Documentation: userspace-api: Add shadow stack API documentation
selftests: Provide helper header for shadow stack testing
mm: Introduce ARCH_HAS_USER_SHADOW_STACK
fork: Add shadow stack support to clone3()
selftests/clone3: Remove redundant flushes of output streams
selftests/clone3: Factor more of main loop into test_clone3()
selftests/clone3: Allow tests to flag if -E2BIG is a valid error code
selftests/clone3: Test shadow stack support
Documentation/userspace-api/index.rst | 1 +
Documentation/userspace-api/shadow_stack.rst | 41 ++++
arch/x86/Kconfig | 1 +
arch/x86/include/asm/shstk.h | 11 +-
arch/x86/kernel/process.c | 2 +-
arch/x86/kernel/shstk.c | 103 +++++++---
fs/proc/task_mmu.c | 2 +-
include/linux/mm.h | 2 +-
include/linux/sched/task.h | 18 ++
include/uapi/linux/sched.h | 13 +-
kernel/fork.c | 114 +++++++++--
mm/Kconfig | 6 +
tools/testing/selftests/clone3/clone3.c | 230 ++++++++++++++++++----
tools/testing/selftests/clone3/clone3_selftests.h | 40 +++-
tools/testing/selftests/ksft_shstk.h | 63 ++++++
15 files changed, 560 insertions(+), 87 deletions(-)
---
base-commit: 8400291e289ee6b2bf9779ff1c83a291501f017b
change-id: 20231019-clone3-shadow-stack-15d40d2bf536
Best regards,
--
Mark Brown <broonie(a)kernel.org>
Hi all,
This is part of a hackathon organized by LKCAMP[1], focused on writing
tests using KUnit. We reached out a while ago asking for advice on what
would be a useful contribution[2] and ended up choosing data structures
that did not yet have tests.
This patch adds tests for the llist data structure, defined in
include/linux/llist.h, and is inspired by the KUnit tests for the doubly
linked list in lib/list-test.c[3].
It is important to note that this patch depends on the patch referenced
in [4], as it utilizes the newly created lib/tests/ subdirectory.
[1] https://lkcamp.dev/about/
[2] https://lore.kernel.org/all/Zktnt7rjKryTh9-N@arch/
[3] https://elixir.bootlin.com/linux/latest/source/lib/list-test.c
[4] https://lore.kernel.org/all/20240720181025.work.002-kees@kernel.org/
---
Changes in v3:
- Resolved checkpatch warnings:
- Renamed tests for macros starting with 'for_each'
- Removed link from commit message
- Replaced hardcoded constants with ENTRIES_SIZE
- Updated initialization of llist_node array
- Fixed typos
- Update Kconfig.debug message for llist_kunit
Changes in v2:
- Add MODULE_DESCRIPTION()
- Move the tests from lib/llist_kunit.c to lib/tests/llist_kunit.c
- Change the license from "GPL v2" to "GPL"
Artur Alves (1):
lib/llist_kunit.c: add KUnit tests for llist
lib/Kconfig.debug | 11 ++
lib/tests/Makefile | 1 +
lib/tests/llist_kunit.c | 358 ++++++++++++++++++++++++++++++++++++++++
3 files changed, 370 insertions(+)
create mode 100644 lib/tests/llist_kunit.c
--
2.46.0