September 2024 - Linux-kselftest-mirror

[PATCH v4 00/30] riscv control-flow integrity for usermode

by Deepak Gupta

v4 for cpu assisted riscv user mode control flow integrity. zicfiss and zicfilp [1] are ratified riscv CPU extensions. v3 [2] was sent in April this year for riscv usermode control flow integrity enabling. To get more information on zicfilp and zicfiss riscv CPU extensions, patch series adds documentation for `zicfilp` and `zicfiss` Documentation/arch/riscv/zicfiss.rst Documentation/arch/riscv/zicfilp.rst Additionally, spec can be obtained from [1]. How to test this series ======================= Toolchain --------- $ git clone git@github.com:sifive/riscv-gnu-toolchain.git -b cfi-dev $ riscv-gnu-toolchain/configure --prefix=<path-to-where-to-build> --with-arch=rv64gc_zicfilp_zicfiss --enable-linux --disable-gdb --with-extra-multilib-test="rv64gc_zicfilp_zicfiss-lp64d:-static" $ make -j$(nproc) Qemu ---- $ git clone git@github.com:deepak0414/qemu.git -b zicfilp_zicfiss_ratified_master_july11 $ cd qemu $ mkdir build $ cd build $ ../configure --target-list=riscv64-softmmu $ make -j$(nproc) Opensbi ------- $ git clone git@github.com:deepak0414/opensbi.git -b cfi_spec_split_opensbi $ make CROSS_COMPILE=<your riscv toolchain> -j$(nproc) PLATFORM=generic Linux ----- Running defconfig is fine. CFI is enabled by default if the toolchain supports it. $ make ARCH=riscv CROSS_COMPILE=<path-to-cfi-riscv-gnu-toolchain>/build/bin/riscv64-unknown-linux-gnu- -j$(nproc) defconfig $ make ARCH=riscv CROSS_COMPILE=<path-to-cfi-riscv-gnu-toolchain>/build/bin/riscv64-unknown-linux-gnu- -j$(nproc) Running ------- Modify your qemu command to have: -bios <path-to-cfi-opensbi>/build/platform/generic/firmware/fw_dynamic.bin -cpu rv64,zicfilp=true,zicfiss=true,zimop=true,zcmop=true vDSO related Opens (in the flux) ================================= I am listing these opens for laying out plan and what to expect in future patch sets. And of course for the sake of discussion. Shadow stack and landing pad enabling in vDSO ---------------------------------------------- vDSO must have shadow stack and landing pad support compiled in for task to have shadow stack and landing pad support. This patch series doesn't enable that (yet). Enabling shadow stack support in vDSO should be straight forward (intend to do that in next versions of patch set). Enabling landing pad support in vDSO requires some collaboration with toolchain folks to follow a single label scheme for all object binaries. This is necessary to ensure that all indirect call-sites are setting correct label and target landing pads are decorated with same label scheme. How many vDSOs --------------- Shadow stack instructions are carved out of zimop (may be operations) and if CPU doesn't implement zimop, they're illegal instructions. Kernel could be running on a CPU which may or may not implement zimop. And thus kernel will have to carry 2 different vDSOs and expose the appropriate one depending on whether CPU implements zimop or not. [1] - https://github.com/riscv/riscv-cfi [2] - https://lore.kernel.org/lkml/20240403234054.2020347-1-debug@rivosinc.com/ --- changelog --------- v4 -- - rebased on 6.11-rc6 - envcfg: Converged with Samuel Holland's patches for envcfg management on per- thread basis. - vma_is_shadow_stack is renamed to is_vma_shadow_stack - picked up Mark Brown's `ARCH_HAS_USER_SHADOW_STACK` patch - signal context: using extended context management to maintain compatibility. - fixed `-Wmissing-prototypes` compiler warnings for prctl functions - Documentation fixes and amending typos. v3 -- envcfg: logic to pick up base envcfg had a bug where `ENVCFG_CBZE` could have been picked on per task basis, even though CPU didn't implement it. Fixed in this series. dt-bindings: As suggested, split into separate commit. fixed the messaging that spec is in public review arch_is_shadow_stack change: arch_is_shadow_stack changed to vma_is_shadow_stack hwprobe: zicfiss / zicfilp if present will get enumerated in hwprobe selftests: As suggested, added object and binary filenames to .gitignore Selftest binary anyways need to be compiled with cfi enabled compiler which will make sure that landing pad and shadow stack are enabled. Thus removed separate enable/disable tests. Cleaned up tests a bit. v2 -- - Using config `CONFIG_RISCV_USER_CFI`, kernel support for riscv control flow integrity for user mode programs can be compiled in the kernel. - Enabling of control flow integrity for user programs is left to user runtime - This patch series introduces arch agnostic `prctls` to enable shadow stack and indirect branch tracking. And implements them on riscv. Deepak Gupta (25): mm: helper `is_shadow_stack_vma` to check shadow stack vma riscv/Kconfig: enable HAVE_EXIT_THREAD for riscv riscv: zicfilp / zicfiss in dt-bindings (extensions.yaml) riscv: zicfiss / zicfilp enumeration riscv: zicfiss / zicfilp extension csr and bit definitions riscv: usercfi state for task and save/restore of CSR_SSP on trap entry/exit riscv/mm : ensure PROT_WRITE leads to VM_READ | VM_WRITE riscv mm: manufacture shadow stack pte riscv mmu: teach pte_mkwrite to manufacture shadow stack PTEs riscv mmu: write protect and shadow stack riscv/mm: Implement map_shadow_stack() syscall riscv/shstk: If needed allocate a new shadow stack on clone prctl: arch-agnostic prctl for indirect branch tracking riscv: Implements arch agnostic shadow stack prctls riscv: Implements arch agnostic indirect branch tracking prctls riscv/traps: Introduce software check exception riscv sigcontext: cfi state struct definition for sigcontext riscv signal: save and restore of shadow stack for signal riscv/kernel: update __show_regs to print shadow stack register riscv/ptrace: riscv cfi status and state via ptrace and in core files riscv/hwprobe: zicfilp / zicfiss enumeration in hwprobe riscv: create a config for shadow stack and landing pad instr support riscv: Documentation for landing pad / indirect branch tracking riscv: Documentation for shadow stack on riscv kselftest/riscv: kselftest for user mode cfi Mark Brown (2): mm: Introduce ARCH_HAS_USER_SHADOW_STACK prctl: arch-agnostic prctl for shadow stack Samuel Holland (3): riscv: Enable cbo.zero only when all harts support Zicboz riscv: Add support for per-thread envcfg CSR values riscv: Call riscv_user_isa_enable() only on the boot hart Documentation/arch/riscv/zicfilp.rst | 104 ++++ Documentation/arch/riscv/zicfiss.rst | 169 ++++++ .../devicetree/bindings/riscv/extensions.yaml | 12 + arch/riscv/Kconfig | 20 + arch/riscv/include/asm/asm-prototypes.h | 1 + arch/riscv/include/asm/cpufeature.h | 15 +- arch/riscv/include/asm/csr.h | 16 + arch/riscv/include/asm/entry-common.h | 2 + arch/riscv/include/asm/hwcap.h | 2 + arch/riscv/include/asm/mman.h | 24 + arch/riscv/include/asm/pgtable.h | 30 +- arch/riscv/include/asm/processor.h | 2 + arch/riscv/include/asm/switch_to.h | 8 + arch/riscv/include/asm/thread_info.h | 4 + arch/riscv/include/asm/usercfi.h | 142 +++++ arch/riscv/include/uapi/asm/hwprobe.h | 2 + arch/riscv/include/uapi/asm/ptrace.h | 18 + arch/riscv/include/uapi/asm/sigcontext.h | 3 + arch/riscv/kernel/Makefile | 2 + arch/riscv/kernel/asm-offsets.c | 4 + arch/riscv/kernel/cpufeature.c | 13 +- arch/riscv/kernel/entry.S | 29 + arch/riscv/kernel/process.c | 32 +- arch/riscv/kernel/ptrace.c | 83 +++ arch/riscv/kernel/signal.c | 62 ++- arch/riscv/kernel/smpboot.c | 2 - arch/riscv/kernel/suspend.c | 4 +- arch/riscv/kernel/sys_hwprobe.c | 2 + arch/riscv/kernel/sys_riscv.c | 10 + arch/riscv/kernel/traps.c | 38 ++ arch/riscv/kernel/usercfi.c | 506 ++++++++++++++++++ arch/riscv/mm/init.c | 2 +- arch/riscv/mm/pgtable.c | 17 + arch/x86/Kconfig | 1 + fs/proc/task_mmu.c | 2 +- include/linux/cpu.h | 4 + include/linux/mm.h | 12 +- include/uapi/asm-generic/mman.h | 1 + include/uapi/linux/elf.h | 1 + include/uapi/linux/prctl.h | 48 ++ kernel/sys.c | 60 +++ mm/Kconfig | 6 + mm/gup.c | 2 +- mm/internal.h | 2 +- mm/mmap.c | 1 + tools/testing/selftests/riscv/Makefile | 2 +- tools/testing/selftests/riscv/cfi/.gitignore | 3 + tools/testing/selftests/riscv/cfi/Makefile | 10 + .../testing/selftests/riscv/cfi/cfi_rv_test.h | 83 +++ .../selftests/riscv/cfi/riscv_cfi_test.c | 82 +++ .../testing/selftests/riscv/cfi/shadowstack.c | 362 +++++++++++++ .../testing/selftests/riscv/cfi/shadowstack.h | 37 ++ 52 files changed, 2079 insertions(+), 20 deletions(-) create mode 100644 Documentation/arch/riscv/zicfilp.rst create mode 100644 Documentation/arch/riscv/zicfiss.rst create mode 100644 arch/riscv/include/asm/mman.h create mode 100644 arch/riscv/include/asm/usercfi.h create mode 100644 arch/riscv/kernel/usercfi.c create mode 100644 tools/testing/selftests/riscv/cfi/.gitignore create mode 100644 tools/testing/selftests/riscv/cfi/Makefile create mode 100644 tools/testing/selftests/riscv/cfi/cfi_rv_test.h create mode 100644 tools/testing/selftests/riscv/cfi/riscv_cfi_test.c create mode 100644 tools/testing/selftests/riscv/cfi/shadowstack.c create mode 100644 tools/testing/selftests/riscv/cfi/shadowstack.h -- 2.45.0

11 months, 1 week

8
45
0 0

[PATCH] selftests: riscv: Allow mmap test to compile on 32-bit

by Charlie Jenkins

Macros needed for 32-bit compilations were hidden behind 64-bit riscv ifdefs. Fix the 32-bit compilations by moving macros to allow the memory_layout test to run on 32-bit. Signed-off-by: Charlie Jenkins <charlie(a)rivosinc.com> Fixes: 73d05262a2ca ("selftests: riscv: Generalize mm selftests") --- tools/testing/selftests/riscv/mm/mmap_test.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/riscv/mm/mmap_test.h b/tools/testing/selftests/riscv/mm/mmap_test.h index 3b29ca3bb3d4..1c3313c201d5 100644 --- a/tools/testing/selftests/riscv/mm/mmap_test.h +++ b/tools/testing/selftests/riscv/mm/mmap_test.h @@ -48,11 +48,11 @@ uint32_t random_addresses[] = { }; #endif -// Only works on 64 bit -#if __riscv_xlen == 64 #define PROT (PROT_READ | PROT_WRITE) #define FLAGS (MAP_PRIVATE | MAP_ANONYMOUS) +// Only works on 64 bit +#if __riscv_xlen == 64 /* mmap must return a value that doesn't use more bits than the hint address. */ static inline unsigned long get_max_value(unsigned long input) { @@ -80,6 +80,8 @@ static inline unsigned long get_max_value(unsigned long input) }) #endif /* __riscv_xlen == 64 */ +#define TEST_MMAPS do { } while (0) + static inline int memory_layout(void) { void *value1 = mmap(NULL, sizeof(int), PROT, FLAGS, 0, 0); --- base-commit: 8400291e289ee6b2bf9779ff1c83a291501f017b change-id: 20240807-mmap_tests__fixes-651cc2b5fead -- - Charlie

11 months, 1 week

2
1
0 0

[GIT PULL] KUnit update for Linux 6.12-rc1

by Shuah Khan

Hi Linus, Please pull the following kunit update for Linux 6.12-rc1. This kunit update for Linux 6.12-rc1 consists of: -- a new int_pow test suite -- documentation update to clarify filename best practices -- kernel-doc fix for EXPORT_SYMBOL_IF_KUNIT -- change to build compile_commands.json automatically instead of requiring a manual build. diff is attached. thanks, -- Shuah ---------------------------------------------------------------- The following changes since commit 8400291e289ee6b2bf9779ff1c83a291501f017b: Linux 6.11-rc1 (2024-07-28 14:19:55 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest tags/linux_kselftest-kunit-6.12-rc1 for you to fetch changes up to 7fcc9b53216cd87f73cc6dbb404220350ddc93b8: lib/math: Add int_pow test suite (2024-09-12 10:03:00 -0600) ---------------------------------------------------------------- linux_kselftest-kunit-6.12-rc1 This kunit update for Linux 6.12-rc1 consists of: -- a new int_pow test suite -- documentation update to clarify filename best practices -- kernel-doc fix for EXPORT_SYMBOL_IF_KUNIT -- change to build compile_commands.json automatically instead of requiring a manual build. ---------------------------------------------------------------- Brendan Jackman (1): kunit: tool: Build compile_commands.json Kees Cook (1): Documentation: KUnit: Update filename best practices Luis Felipe Hernandez (1): lib/math: Add int_pow test suite Michal Wajdeczko (1): kunit: Fix kernel-doc for EXPORT_SYMBOL_IF_KUNIT Documentation/dev-tools/kunit/style.rst | 29 ++++++++++++------ include/kunit/visibility.h | 1 + lib/Kconfig.debug | 16 ++++++++++ lib/math/Makefile | 1 + lib/math/tests/Makefile | 3 ++ lib/math/tests/int_pow_kunit.c | 52 +++++++++++++++++++++++++++++++++ tools/testing/kunit/kunit_kernel.py | 3 +- 7 files changed, 95 insertions(+), 10 deletions(-) create mode 100644 lib/math/tests/Makefile create mode 100644 lib/math/tests/int_pow_kunit.c ----------------------------------------------------------------

11 months, 1 week

2
1
0 0

[GIT PULL] Kselftest update for Linux 6.12-rc1

by Shuah Khan

Hi Linus, Please pull the following kselftest next update for Linux 6.12-rc1. This kselftest update for Linux 6.12-rc1 consists of: -- test coverage for dup_fd() failure handling in unshare_fd() -- new selftest for the acct() syscall -- basic uprobe testcase -- several small fixes and cleanups to existing tests -- user and strscpy removal as they became kunit tests -- fixes to build failures and warnings diff is attached. thanks, -- Shuah ---------------------------------------------------------------- The following changes since commit 8400291e289ee6b2bf9779ff1c83a291501f017b: Linux 6.11-rc1 (2024-07-28 14:19:55 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest tags/linux_kselftest-next-6.12-rc1 for you to fetch changes up to a0474b8d5974e142461ac7584c996feea167bcc1: selftests: kselftest: Use strerror() on nolibc (2024-09-11 09:52:33 -0600) ---------------------------------------------------------------- linux_kselftest-next-6.12-rc1 This kselftest update for Linux 6.12-rc1 consists of: -- test coverage for dup_fd() failure handling in unshare_fd() -- new selftest for the acct() syscall -- basic uprobe testcase -- several small fixes and cleanups to existing tests -- user and strscpy removal as they became kunit tests -- fixes to build failures and warnings ---------------------------------------------------------------- Abdulrasaq Lawani (1): selftest: acct: Add selftest for the acct() syscall Abhinav Jain (1): selftests: filesystems: fix warn_unused_result build warnings Al Viro (1): selftests:core: test coverage for dup_fd() failure handling in unshare_fd() Anders Roxell (2): selftests: rust: config: add trailing newline selftests: rust: config: disable GCC_PLUGINS Chang Yu (1): selftests/exec: Fix grammar in an error message. Masahiro Yamada (2): selftests: harness: remove unneeded __constructor_order_last() selftests: harness: rename __constructor_order for clarification Masami Hiramatsu (Google) (3): selftests/uprobes: Add a basic uprobe testcase selftests/ftrace: Add required dependency for kprobe tests selftests/ftrace: Fix eventfs ownership testcase to find mount point Muhammad Usama Anjum (3): selftests: tpm2: redirect python unittest logs to stdout selftests: user: remove user suite selftests: lib: remove strscpy test Piotr Zalewski (1): kselftest: timers: Fix const correctness Shreeya Patel (1): kselftest: cpufreq: Add RTC wakeup alarm Shuah Khan (1): selftests:resctrl: Fix build failure on archs without __cpuid_count() Steven Rostedt (Google) (2): tracing/selftests: Run the ownership test twice selftests/ftrace: Fix test to handle both old and new kernels zhang jiao (2): selftests/timers: Remove unused NSEC_PER_SEC macro selftests: kselftest: Use strerror() on nolibc tools/testing/selftests/Makefile | 2 +- tools/testing/selftests/acct/.gitignore | 3 + tools/testing/selftests/acct/Makefile | 5 ++ tools/testing/selftests/acct/acct_syscall.c | 78 ++++++++++++++++++ tools/testing/selftests/core/Makefile | 2 +- tools/testing/selftests/core/unshare_test.c | 94 ++++++++++++++++++++++ tools/testing/selftests/cpufreq/cpufreq.sh | 15 ++++ tools/testing/selftests/cpufreq/main.sh | 13 ++- .../drivers/s390x/uvdevice/test_uvdevice.c | 6 -- tools/testing/selftests/exec/execveat.c | 2 +- .../filesystems/statmount/statmount_test_ns.c | 7 +- .../ftrace/test.d/00basic/test_ownership.tc | 46 +++++++---- .../ftrace/test.d/dynevent/add_remove_uprobe.tc | 26 ++++++ .../ftrace/test.d/ftrace/func_set_ftrace_file.tc | 9 ++- .../ftrace/test.d/kprobe/kprobe_args_char.tc | 2 +- .../ftrace/test.d/kprobe/kprobe_args_string.tc | 2 +- tools/testing/selftests/hid/hid_bpf.c | 6 -- tools/testing/selftests/kselftest.h | 10 +-- tools/testing/selftests/kselftest_harness.h | 18 +---- tools/testing/selftests/lib/Makefile | 3 +- tools/testing/selftests/lib/config | 1 - tools/testing/selftests/lib/strscpy.sh | 3 - tools/testing/selftests/resctrl/cat_test.c | 7 +- tools/testing/selftests/rtc/rtctest.c | 7 -- tools/testing/selftests/rust/config | 3 +- tools/testing/selftests/timers/change_skew.c | 3 - tools/testing/selftests/timers/skew_consistency.c | 2 - tools/testing/selftests/timers/threadtest.c | 4 +- tools/testing/selftests/tpm2/test_async.sh | 2 +- tools/testing/selftests/tpm2/test_smoke.sh | 2 +- tools/testing/selftests/tpm2/test_space.sh | 2 +- tools/testing/selftests/user/Makefile | 9 --- tools/testing/selftests/user/config | 1 - tools/testing/selftests/user/test_user_copy.sh | 18 ----- 34 files changed, 302 insertions(+), 111 deletions(-) create mode 100644 tools/testing/selftests/acct/.gitignore create mode 100644 tools/testing/selftests/acct/Makefile create mode 100644 tools/testing/selftests/acct/acct_syscall.c create mode 100644 tools/testing/selftests/core/unshare_test.c create mode 100644 tools/testing/selftests/ftrace/test.d/dynevent/add_remove_uprobe.tc delete mode 100755 tools/testing/selftests/lib/strscpy.sh delete mode 100644 tools/testing/selftests/user/Makefile delete mode 100644 tools/testing/selftests/user/config delete mode 100755 tools/testing/selftests/user/test_user_copy.sh ----------------------------------------------------------------

11 months, 1 week

2
1
0 0

[GIT PULL] nolibc for 6.12-rc1

by Shuah Khan

Hi Linus, Please pull the following nolibc update for Linux 6.12-rc1. This nolibc update for Linux 6.12-rc1 consists of: Highlights ---------- * Clang support (including LTO) Other Changes ------------- * stdbool.h support * argc/argv/envp arguments for constructors * Small #include ordering fix Test Results: Passed: tools/testing/selftests/nolibc/run-tests.sh tools/testing/selftests/nolibc/run-tests.sh -m user diff is attached. thanks, -- Shuah ---------------------------------------------------------------- The following changes since commit 8400291e289ee6b2bf9779ff1c83a291501f017b: Linux 6.11-rc1 (2024-07-28 14:19:55 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest tags/linux_kselftest-nolibc-6.12-rc1 for you to fetch changes up to 248f6b935bbd8f7bc211cce2b6fd76be4c449848: Merge tag 'nolibc-20240824-for-6.12-1' of https://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc into nolibc (2024-08-27 06:43:34 -0600) ---------------------------------------------------------------- linux_kselftest-nolibc-6.12-rc1 This nolibc update for Linux 6.12-rc1 consists of: Highlights ---------- * Clang support (including LTO) Other Changes ------------- * stdbool.h support * argc/argv/envp arguments for constructors * Small #include ordering fix ---------------------------------------------------------------- Shuah Khan (1): Merge tag 'nolibc-20240824-for-6.12-1' of https://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc into nolibc Thomas Weißschuh (21): tools/nolibc: include arch.h from string.h tools/nolibc: add stdbool.h header tools/nolibc: pass argc, argv and envp to constructors tools/nolibc: arm: use clang-compatible asm syntax tools/nolibc: mips: load current function to $t9 tools/nolibc: powerpc: limit stack-protector workaround to GCC tools/nolibc: compiler: introduce __nolibc_has_attribute() tools/nolibc: move entrypoint specifics to compiler.h tools/nolibc: compiler: use attribute((naked)) if available selftests/nolibc: report failure if no testcase passed selftests/nolibc: avoid passing NULL to printf("%s") selftests/nolibc: determine $(srctree) first selftests/nolibc: add support for LLVM= parameter selftests/nolibc: add cc-option compatible with clang cross builds selftests/nolibc: run-tests.sh: avoid overwriting CFLAGS_EXTRA selftests/nolibc: don't use libgcc when building with clang selftests/nolibc: use correct clang target for s390/systemz selftests/nolibc: run-tests.sh: allow building through LLVM tools/nolibc: crt: mark _start_c() as used tools/nolibc: stackprotector: mark implicitly used symbols as used tools/nolibc: x86_64: use local label in memcpy/memmove tools/include/nolibc/Makefile | 1 + tools/include/nolibc/arch-aarch64.h | 4 +-- tools/include/nolibc/arch-arm.h | 8 +++--- tools/include/nolibc/arch-i386.h | 4 +-- tools/include/nolibc/arch-loongarch.h | 4 +-- tools/include/nolibc/arch-mips.h | 8 ++++-- tools/include/nolibc/arch-powerpc.h | 6 ++-- tools/include/nolibc/arch-riscv.h | 4 +-- tools/include/nolibc/arch-s390.h | 4 +-- tools/include/nolibc/arch-x86_64.h | 8 +++--- tools/include/nolibc/compiler.h | 24 +++++++++++----- tools/include/nolibc/crt.h | 25 +++++++++-------- tools/include/nolibc/nolibc.h | 3 +- tools/include/nolibc/stackprotector.h | 4 +-- tools/include/nolibc/stdbool.h | 16 +++++++++++ tools/include/nolibc/string.h | 1 + tools/testing/selftests/nolibc/Makefile | 41 +++++++++++++++++++--------- tools/testing/selftests/nolibc/nolibc-test.c | 9 +++--- tools/testing/selftests/nolibc/run-tests.sh | 16 ++++++++--- 19 files changed, 123 insertions(+), 67 deletions(-) create mode 100644 tools/include/nolibc/stdbool.h ----------------------------------------------------------------

11 months, 1 week

2
1
0 0

[PATCH v4 0/4] selftests: kvm: s390: Add ucontrol memory selftests

by Christoph Schlameuss

This patch series adds a some not yet picked selftests to the kvm s390x selftest suite. The additional test cases are covering: * Assert KVM_EXIT_S390_UCONTROL exit on not mapped memory access * Assert functionality of storage keys in ucontrol VM * Assert that memory region operations are rejected for ucontrol VMs Running the test cases requires sys_admin capabilities to start the ucontrol VM. This can be achieved by running as root or with a command like: sudo setpriv --reuid nobody --inh-caps -all,+sys_admin \ --ambient-caps -all,+sys_admin --bounding-set -all,+sys_admin \ ./ucontrol_test --- The patches in this series have been part of the previous patch series. The test cases added here do depend on the fixture added in the earlier patches. From v5 PATCH 7-9 the segment and page table generation has been removed and DAT has been disabled. Since DAT is not necessary to validate the KVM code. https://lore.kernel.org/kvm/20240807154512.316936-1-schlameuss@linux.ibm.co… v4: - fix whitespaces in pointer function arguments (thanks Claudio) - fix whitespaces in comments (thanks Janosch) v3: - fix skey assertion (thanks Claudio) - introduce a wrapper around UCAS map and unmap ioctls to improve readability (Claudio) - add an displacement to accessed memory to assert translation intercepts actually point to segments to the uc_map_unmap test - add an misaligned failing mapping try to the uc_map_unmap test v2: - Reenable KSS intercept and handle it within skey test. - Modify the checked register between storing (sske) and reading (iske) it within the test program to make sure the. - Add an additional state assertion in the end of uc_skey - Fix some typos and white spaces. v1: - Remove segment and page table generation and disable DAT. This is not necessary to validate the KVM code. Christoph Schlameuss (4): selftests: kvm: s390: Add uc_map_unmap VM test case selftests: kvm: s390: Add uc_skey VM test case selftests: kvm: s390: Verify reject memory region operations for ucontrol VMs fixup! selftests: kvm: s390: Add VM run test case .../selftests/kvm/s390x/ucontrol_test.c | 264 +++++++++++++++++- 1 file changed, 258 insertions(+), 6 deletions(-) -- 2.46.0

11 months, 1 week

2
7
0 0

rustgcc-kselftest: error: unknown unstable option: `patchable-function-entry`

by Naresh Kamboju

The x86 rust gcc builds failed on the Linux next-20240917 due to following build warnings / errors with rustgcc for selftests rust builds. First seen on next-20240917 Good: next-20240913 BAD: next-20240917 Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> build log: -------- error: unknown unstable option: `patchable-function-entry` make[3]: *** [rust/Makefile:392: rust/core.o] Error 1 Build Log links, -------- - https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20240916/te… Build failed comparison: - https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20240916/te… metadata: ---- git describe: next-20240917 git repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next git sha: 7083504315d64199a329de322fce989e1e10f4f7 kernel config: https://storage.tuxsuite.com/public/linaro/lkft/builds/2m9CHpK6gWVXL2Rjt0R5… build url: https://storage.tuxsuite.com/public/linaro/lkft/builds/2m9CHpK6gWVXL2Rjt0R5… toolchain: rustgcc config-name: rustgcc-lkftconfig-kselftest arch: x86 Steps to reproduce: --------- - https://storage.tuxsuite.com/public/linaro/lkft/builds/2m9CHpK6gWVXL2Rjt0R5… - tuxmake --runtime podman \ --target-arch x86_64 \ --toolchain rustgcc \ --kconfig https://storage.tuxsuite.com/public/linaro/lkft/builds/2m9CHpK6gWVXL2Rjt0R5… \ TARGETS=rust debugkernel cpupower headers kernel kselftest modules -- Linaro LKFT https://lkft.linaro.org

11 months, 1 week

2
2
0 0

[PATCH net-next v7 25/25] testing/selftest: add test tool and scripts for ovpn module

by Antonio Quartulli

The ovpn-cli tool can be compiled and used as selftest for the ovpn kernel module. It implementes the netlink API and can thus be integrated in any script for more automated testing. Along with the tool, 2 scripts are added that perform basic functionality tests by means of network namespaces. The scripts can be performed in sequence by running run.sh Cc: shuah(a)kernel.org Cc: linux-kselftest(a)vger.kernel.org Signed-off-by: Antonio Quartulli <antonio(a)openvpn.net> --- tools/testing/selftests/Makefile | 1 + tools/testing/selftests/net/ovpn/.gitignore | 2 + tools/testing/selftests/net/ovpn/Makefile | 17 + tools/testing/selftests/net/ovpn/config | 8 + .../selftests/net/ovpn/data-test-tcp.sh | 9 + tools/testing/selftests/net/ovpn/data-test.sh | 150 ++ tools/testing/selftests/net/ovpn/data64.key | 5 + .../testing/selftests/net/ovpn/float-test.sh | 115 ++ tools/testing/selftests/net/ovpn/ovpn-cli.c | 1820 +++++++++++++++++ .../testing/selftests/net/ovpn/tcp_peers.txt | 5 + .../testing/selftests/net/ovpn/udp_peers.txt | 5 + 11 files changed, 2137 insertions(+) create mode 100644 tools/testing/selftests/net/ovpn/.gitignore create mode 100644 tools/testing/selftests/net/ovpn/Makefile create mode 100644 tools/testing/selftests/net/ovpn/config create mode 100755 tools/testing/selftests/net/ovpn/data-test-tcp.sh create mode 100755 tools/testing/selftests/net/ovpn/data-test.sh create mode 100644 tools/testing/selftests/net/ovpn/data64.key create mode 100755 tools/testing/selftests/net/ovpn/float-test.sh create mode 100644 tools/testing/selftests/net/ovpn/ovpn-cli.c create mode 100644 tools/testing/selftests/net/ovpn/tcp_peers.txt create mode 100644 tools/testing/selftests/net/ovpn/udp_peers.txt diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 3b7df5477317..8330f031d167 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -67,6 +67,7 @@ TARGETS += net/hsr TARGETS += net/mptcp TARGETS += net/netfilter TARGETS += net/openvswitch +TARGETS += net/ovpn TARGETS += net/packetdrill TARGETS += net/rds TARGETS += net/tcp_ao diff --git a/tools/testing/selftests/net/ovpn/.gitignore b/tools/testing/selftests/net/ovpn/.gitignore new file mode 100644 index 000000000000..ee44c081ca7c --- /dev/null +++ b/tools/testing/selftests/net/ovpn/.gitignore @@ -0,0 +1,2 @@ +# SPDX-License-Identifier: GPL-2.0+ +ovpn-cli diff --git a/tools/testing/selftests/net/ovpn/Makefile b/tools/testing/selftests/net/ovpn/Makefile new file mode 100644 index 000000000000..171cf047497c --- /dev/null +++ b/tools/testing/selftests/net/ovpn/Makefile @@ -0,0 +1,17 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2020-2024 OpenVPN, Inc. +# +CFLAGS = -Wall -I../../../../../usr/include +CFLAGS += $(shell pkg-config --cflags libnl-3.0 libnl-genl-3.0) + +LDFLAGS = -lmbedtls -lmbedcrypto +LDFLAGS += $(shell pkg-config --libs libnl-3.0 libnl-genl-3.0) + +ovpn-cli: ovpn-cli.c + +TEST_PROGS = data-test.sh \ + data-test-tcp.sh \ + float-test.sh +TEST_GEN_FILES = ovpn-cli + +include ../../lib.mk diff --git a/tools/testing/selftests/net/ovpn/config b/tools/testing/selftests/net/ovpn/config new file mode 100644 index 000000000000..5ff47de23c12 --- /dev/null +++ b/tools/testing/selftests/net/ovpn/config @@ -0,0 +1,8 @@ +CONFIG_NET=y +CONFIG_INET=y +CONFIG_NET_UDP_TUNNEL=y +CONFIG_DST_CACHE=y +CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_GCM=y +CONFIG_CRYPTO_CHACHA20POLY1305=y +CONFIG_OVPN=y diff --git a/tools/testing/selftests/net/ovpn/data-test-tcp.sh b/tools/testing/selftests/net/ovpn/data-test-tcp.sh new file mode 100755 index 000000000000..65f05659b5fd --- /dev/null +++ b/tools/testing/selftests/net/ovpn/data-test-tcp.sh @@ -0,0 +1,9 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2024 OpenVPN, Inc. +# +# Author: Antonio Quartulli <antonio(a)openvpn.net> + +PROTO="TCP" + +source data-test.sh diff --git a/tools/testing/selftests/net/ovpn/data-test.sh b/tools/testing/selftests/net/ovpn/data-test.sh new file mode 100755 index 000000000000..8468defb1f1c --- /dev/null +++ b/tools/testing/selftests/net/ovpn/data-test.sh @@ -0,0 +1,150 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2020-2024 OpenVPN, Inc. +# +# Author: Antonio Quartulli <antonio(a)openvpn.net> + +#set -x +set -e + +UDP_PEERS_FILE=${UDP_PEERS_FILE:-udp_peers.txt} +TCP_PEERS_FILE=${TCP_PEERS_FILE:-tcp_peers.txt} +OVPN_CLI=${OVPN_CLI:-./ovpn-cli} +ALG=${ALG:-aes} +PROTO=${PROTO:-UDP} + +create_ns() { + ip netns add peer${1} +} + +setup_ns() { + MODE="P2P" + + if [ ${1} -eq 0 ]; then + MODE="MP" + for p in $(seq 1 ${NUM_PEERS}); do + ip link add veth${p} netns peer0 type veth peer name veth${p} netns peer${p} + + ip -n peer0 addr add 10.10.${p}.1/24 dev veth${p} + ip -n peer0 link set veth${p} up + + ip -n peer${p} addr add 10.10.${p}.2/24 dev veth${p} + ip -n peer${p} link set veth${p} up + done + fi + + ip netns exec peer${1} ${OVPN_CLI} new_iface tun${1} $MODE + ip -n peer${1} addr add ${2} dev tun${1} + ip -n peer${1} link set tun${1} up +} + +add_peer() { + if [ "${PROTO}" == "UDP" ]; then + if [ ${1} -eq 0 ]; then + ip netns exec peer0 ${OVPN_CLI} new_multi_peer tun0 1 ${UDP_PEERS_FILE} + + for p in $(seq 1 ${NUM_PEERS}); do + # ip netns exec peer0 ${OVPN_CLI} new_peer tun0 ${p} ${p} 10.10.${p}.2 1 5.5.5.$((${p} + 1)) + + ip netns exec peer0 ${OVPN_CLI} new_key tun0 ${p} 1 0 ${ALG} 0 data64.key + done + else + ip netns exec peer${1} ${OVPN_CLI} new_peer tun${1} 1 ${1} 10.10.${1}.1 1 + ip netns exec peer${1} ${OVPN_CLI} new_key tun${1} ${1} 1 0 ${ALG} 1 data64.key + fi + else + if [ ${1} -eq 0 ]; then + (ip netns exec peer0 ${OVPN_CLI} listen tun0 1 ${TCP_PEERS_FILE} && { + for p in $(seq 1 ${NUM_PEERS}); do + ip netns exec peer0 ${OVPN_CLI} new_key tun0 ${p} 1 0 ${ALG} 0 data64.key + done + }) & + sleep 5 + else + ip netns exec peer${1} ${OVPN_CLI} connect tun${1} ${1} 10.10.${1}.1 1 data64.key + fi + fi +} + +cleanup() { + for p in $(seq 1 10); do + ip -n peer0 link del veth${p} 2>/dev/null || true + done + for p in $(seq 0 10); do + ip netns exec peer${p} ${OVPN_CLI} del_iface tun${p} 2>/dev/null || true + ip netns del peer${p} 2>/dev/null || true + done +} + +if [ "${PROTO}" == "UDP" ]; then + NUM_PEERS=${NUM_PEERS:-$(wc -l ${UDP_PEERS_FILE} | awk '{print $1}')} +else + NUM_PEERS=${NUM_PEERS:-$(wc -l ${TCP_PEERS_FILE} | awk '{print $1}')} +fi + +cleanup + +for p in $(seq 0 ${NUM_PEERS}); do + create_ns ${p} +done + +for p in $(seq 0 ${NUM_PEERS}); do + setup_ns ${p} 5.5.5.$((${p} + 1))/24 +done + +for p in $(seq 0 ${NUM_PEERS}); do + add_peer ${p} +done + +for p in $(seq 1 ${NUM_PEERS}); do + ip netns exec peer0 ${OVPN_CLI} set_peer tun0 ${p} 60 120 + ip netns exec peer${p} ${OVPN_CLI} set_peer tun${p} ${p} 60 120 +done + +for p in $(seq 1 ${NUM_PEERS}); do + ip netns exec peer0 ping -qfc 1000 -w 5 5.5.5.$((${p} + 1)) +done + +ip netns exec peer0 iperf3 -1 -s & +sleep 1 +ip netns exec peer1 iperf3 -Z -t 3 -c 5.5.5.1 + +for p in $(seq 1 ${NUM_PEERS}); do + ip netns exec peer0 ${OVPN_CLI} new_key tun0 ${p} 2 1 ${ALG} 0 data64.key + ip netns exec peer${p} ${OVPN_CLI} new_key tun${p} ${p} 2 1 ${ALG} 1 data64.key + ip netns exec peer${p} ${OVPN_CLI} swap_keys tun${p} ${p} +done + +sleep 1 +echo "Querying all peers:" +ip netns exec peer0 ${OVPN_CLI} get_peer tun0 +ip netns exec peer1 ${OVPN_CLI} get_peer tun1 + +echo "Querying peer 1:" +ip netns exec peer0 ${OVPN_CLI} get_peer tun0 1 + +echo "Querying non-existent peer 10:" +ip netns exec peer0 ${OVPN_CLI} get_peer tun0 10 || true + +ip netns exec peer0 ${OVPN_CLI} del_peer tun0 1 + +echo "Setting timeout to 10s MP:" +# bring ifaces down to prevent traffic being sent +for p in $(seq 0 ${NUM_PEERS}); do + ip -n peer${p} link set tun${p} down +done +# set short timeout +for p in $(seq 1 ${NUM_PEERS}); do + ip netns exec peer0 ${OVPN_CLI} set_peer tun0 ${p} 10 10 || true + ip netns exec peer${p} ${OVPN_CLI} set_peer tun${p} ${p} 0 0 +done +# wait for peers to timeout +sleep 15 + +echo "Setting timeout to 10s P2P:" +for p in $(seq 1 ${NUM_PEERS}); do + ip netns exec peer${p} ${OVPN_CLI} set_peer tun${p} ${p} 10 10 +done +sleep 15 + +cleanup diff --git a/tools/testing/selftests/net/ovpn/data64.key b/tools/testing/selftests/net/ovpn/data64.key new file mode 100644 index 000000000000..a99e88c4e290 --- /dev/null +++ b/tools/testing/selftests/net/ovpn/data64.key @@ -0,0 +1,5 @@ +jRqMACN7d7/aFQNT8S7jkrBD8uwrgHbG5OQZP2eu4R1Y7tfpS2bf5RHv06Vi163CGoaIiTX99R3B +ia9ycAH8Wz1+9PWv51dnBLur9jbShlgZ2QHLtUc4a/gfT7zZwULXuuxdLnvR21DDeMBaTbkgbai9 +uvAa7ne1liIgGFzbv+Bas4HDVrygxIxuAnP5Qgc3648IJkZ0QEXPF+O9f0n5+QIvGCxkAUVx+5K6 +KIs+SoeWXnAopELmoGSjUpFtJbagXK82HfdqpuUxT2Tnuef0/14SzVE/vNleBNu2ZbyrSAaah8tE +BofkPJUBFY+YQcfZNM5Dgrw3i+Bpmpq/gpdg5w== diff --git a/tools/testing/selftests/net/ovpn/float-test.sh b/tools/testing/selftests/net/ovpn/float-test.sh new file mode 100755 index 000000000000..5e113b767e78 --- /dev/null +++ b/tools/testing/selftests/net/ovpn/float-test.sh @@ -0,0 +1,115 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2020-2024 OpenVPN, Inc. +# +# Author: Antonio Quartulli <antonio(a)openvpn.net> + +#set -x +set -e + +UDP_PEERS_FILE=${UDP_PEERS_FILE:-udp_peers.txt} +TCP_PEERS_FILE=${TCP_PEERS_FILE:-tcp_peers.txt} +OVPN_CLI=${OVPN_CLI:-./ovpn-cli} +ALG=${ALG:-aes} +PROTO=${PROTO:-UDP} + +create_ns() { + ip netns add peer${1} +} + +setup_ns() { + MODE="P2P" + + if [ ${1} -eq 0 ]; then + MODE="MP" + for p in $(seq 1 ${NUM_PEERS}); do + ip link add veth${p} netns peer0 type veth peer name veth${p} netns peer${p} + + ip -n peer0 addr add 10.10.${p}.1/24 dev veth${p} + ip -n peer0 link set veth${p} up + + ip -n peer${p} addr add 10.10.${p}.2/24 dev veth${p} + ip -n peer${p} link set veth${p} up + done + fi + + ip netns exec peer${1} ${OVPN_CLI} new_iface tun${1} $MODE + ip -n peer${1} addr add ${2} dev tun${1} + ip -n peer${1} link set tun${1} up +} + +add_peer() { + if [ "${PROTO}" == "UDP" ]; then + if [ ${1} -eq 0 ]; then + ip netns exec peer0 ${OVPN_CLI} new_multi_peer tun0 1 ${UDP_PEERS_FILE} + + for p in $(seq 1 ${NUM_PEERS}); do + # ip netns exec peer0 ${OVPN_CLI} new_peer tun0 ${p} ${p} 10.10.${p}.2 1 5.5.5.$((${p} + 1)) + ip netns exec peer0 ${OVPN_CLI} new_key tun0 ${p} 1 0 ${ALG} 0 data64.key + done + else + ip netns exec peer${1} ${OVPN_CLI} new_peer tun${1} 1 ${1} 10.10.${1}.1 1 + ip netns exec peer${1} ${OVPN_CLI} new_key tun${1} ${1} 1 0 ${ALG} 1 data64.key + fi + else + if [ ${1} -eq 0 ]; then + (ip netns exec peer0 ${OVPN_CLI} listen tun0 1 ${TCP_PEERS_FILE} && { + for p in $(seq 1 ${NUM_PEERS}); do + ip netns exec peer0 ${OVPN_CLI} new_key tun0 ${p} 1 0 ${ALG} 0 data64.key + done + }) & + sleep 5 + else + ip netns exec peer${1} ${OVPN_CLI} connect tun${1} ${1} 10.10.${1}.1 1 5.5.5.1 data64.key + fi + fi +} + +cleanup() { + for p in $(seq 1 10); do + ip -n peer0 link del veth${p} 2>/dev/null || true + done + for p in $(seq 0 10); do + ip netns exec peer${p} ${OVPN_CLI} del_iface tun${p} 2>/dev/null || true + ip netns del peer${p} 2>/dev/null || true + done +} + +if [ "${PROTO}" == "UDP" ]; then + NUM_PEERS=${NUM_PEERS:-$(wc -l ${UDP_PEERS_FILE} | awk '{print $1}')} +else + NUM_PEERS=${NUM_PEERS:-$(wc -l ${TCP_PEERS_FILE} | awk '{print $1}')} +fi + +cleanup + +for p in $(seq 0 ${NUM_PEERS}); do + create_ns ${p} +done + +for p in $(seq 0 ${NUM_PEERS}); do + setup_ns ${p} 5.5.5.$((${p} + 1))/24 +done + +for p in $(seq 0 ${NUM_PEERS}); do + add_peer ${p} +done + +for p in $(seq 1 ${NUM_PEERS}); do + ip netns exec peer0 ${OVPN_CLI} set_peer tun0 ${p} 60 120 + ip netns exec peer${p} ${OVPN_CLI} set_peer tun${p} ${p} 60 120 +done + +for p in $(seq 1 ${NUM_PEERS}); do + ip netns exec peer0 ping -qfc 1000 -w 5 5.5.5.$((${p} + 1)) +done +# make clients float.. +for p in $(seq 1 ${NUM_PEERS}); do + ip -n peer${p} addr del 10.10.${p}.2/24 dev veth${p} + ip -n peer${p} addr add 10.10.${p}.3/24 dev veth${p} +done +for p in $(seq 1 ${NUM_PEERS}); do + ip netns exec peer${p} ping -qfc 1000 -w 5 5.5.5.1 +done + +cleanup diff --git a/tools/testing/selftests/net/ovpn/ovpn-cli.c b/tools/testing/selftests/net/ovpn/ovpn-cli.c new file mode 100644 index 000000000000..a10ad4881f13 --- /dev/null +++ b/tools/testing/selftests/net/ovpn/ovpn-cli.c @@ -0,0 +1,1820 @@ +// SPDX-License-Identifier: GPL-2.0 +/* OpenVPN data channel accelerator + * + * Copyright (C) 2020-2024 OpenVPN, Inc. + * + * Author: Antonio Quartulli <antonio(a)openvpn.net> + */ + +#include <stdio.h> +#include <inttypes.h> +#include <stdbool.h> +#include <string.h> +#include <errno.h> +#include <unistd.h> +#include <arpa/inet.h> +#include <net/if.h> +#include <netinet/in.h> + +#include <linux/ovpn.h> +#include <linux/types.h> +#include <linux/netlink.h> + +#include <netlink/socket.h> +#include <netlink/netlink.h> +#include <netlink/genl/genl.h> +#include <netlink/genl/family.h> +#include <netlink/genl/ctrl.h> + +#include <mbedtls/base64.h> +#include <mbedtls/error.h> + +#include <sys/socket.h> + +/* we use strscpy to make checkpatch happy */ +#define strscpy strncpy + +/* libnl < 3.5.0 does not set the NLA_F_NESTED on its own, therefore we + * have to explicitly do it to prevent the kernel from failing upon + * parsing of the message + */ +#define nla_nest_start(_msg, _type) \ + nla_nest_start(_msg, (_type) | NLA_F_NESTED) + +uint64_t nla_get_uint(struct nlattr *attr) +{ + if (nla_len(attr) == sizeof(uint32_t)) + return nla_get_u32(attr); + else + return nla_get_u64(attr); +} + +typedef int (*ovpn_nl_cb)(struct nl_msg *msg, void *arg); + +enum ovpn_key_direction { + KEY_DIR_IN = 0, + KEY_DIR_OUT, +}; + +#define KEY_LEN (256 / 8) +#define NONCE_LEN 8 + +#define PEER_ID_UNDEF 0x00FFFFFF + +struct nl_ctx { + struct nl_sock *nl_sock; + struct nl_msg *nl_msg; + struct nl_cb *nl_cb; + + int ovpn_dco_id; +}; + +struct ovpn_ctx { + __u8 key_enc[KEY_LEN]; + __u8 key_dec[KEY_LEN]; + __u8 nonce[NONCE_LEN]; + + enum ovpn_cipher_alg cipher; + + sa_family_t sa_family; + + __u32 peer_id; + __u16 lport; + + union { + struct sockaddr_in in4; + struct sockaddr_in6 in6; + } remote; + + union { + struct sockaddr_in in4; + struct sockaddr_in6 in6; + } peer_ip; + + bool peer_ip_set; + + unsigned int ifindex; + char ifname[IFNAMSIZ]; + enum ovpn_mode mode; + bool mode_set; + + int socket; + int cli_socket; + + __u32 keepalive_interval; + __u32 keepalive_timeout; + + enum ovpn_key_direction key_dir; + enum ovpn_key_slot key_slot; + int key_id; +}; + +static int ovpn_nl_recvmsgs(struct nl_ctx *ctx) +{ + int ret; + + ret = nl_recvmsgs(ctx->nl_sock, ctx->nl_cb); + + switch (ret) { + case -NLE_INTR: + fprintf(stderr, + "netlink received interrupt due to signal - ignoring\n"); + break; + case -NLE_NOMEM: + fprintf(stderr, "netlink out of memory error\n"); + break; + case -NLE_AGAIN: + fprintf(stderr, + "netlink reports blocking read - aborting wait\n"); + break; + default: + if (ret) + fprintf(stderr, "netlink reports error (%d): %s\n", + ret, nl_geterror(-ret)); + break; + } + + return ret; +} + +static struct nl_ctx *nl_ctx_alloc_flags(struct ovpn_ctx *ovpn, int cmd, + int flags) +{ + struct nl_ctx *ctx; + int err, ret; + + ctx = calloc(1, sizeof(*ctx)); + if (!ctx) + return NULL; + + ctx->nl_sock = nl_socket_alloc(); + if (!ctx->nl_sock) { + fprintf(stderr, "cannot allocate netlink socket\n"); + goto err_free; + } + + nl_socket_set_buffer_size(ctx->nl_sock, 8192, 8192); + + ret = genl_connect(ctx->nl_sock); + if (ret) { + fprintf(stderr, "cannot connect to generic netlink: %s\n", + nl_geterror(ret)); + goto err_sock; + } + + /* enable Extended ACK for detailed error reporting */ + err = 1; + setsockopt(nl_socket_get_fd(ctx->nl_sock), SOL_NETLINK, NETLINK_EXT_ACK, + &err, sizeof(err)); + + ctx->ovpn_dco_id = genl_ctrl_resolve(ctx->nl_sock, OVPN_FAMILY_NAME); + if (ctx->ovpn_dco_id < 0) { + fprintf(stderr, "cannot find ovpn_dco netlink component: %d\n", + ctx->ovpn_dco_id); + goto err_free; + } + + ctx->nl_msg = nlmsg_alloc(); + if (!ctx->nl_msg) { + fprintf(stderr, "cannot allocate netlink message\n"); + goto err_sock; + } + + ctx->nl_cb = nl_cb_alloc(NL_CB_DEFAULT); + if (!ctx->nl_cb) { + fprintf(stderr, "failed to allocate netlink callback\n"); + goto err_msg; + } + + nl_socket_set_cb(ctx->nl_sock, ctx->nl_cb); + + genlmsg_put(ctx->nl_msg, 0, 0, ctx->ovpn_dco_id, 0, flags, cmd, 0); + + if (ovpn->ifindex > 0) + NLA_PUT_U32(ctx->nl_msg, OVPN_A_IFINDEX, ovpn->ifindex); + + return ctx; +nla_put_failure: +err_msg: + nlmsg_free(ctx->nl_msg); +err_sock: + nl_socket_free(ctx->nl_sock); +err_free: + free(ctx); + return NULL; +} + +static struct nl_ctx *nl_ctx_alloc(struct ovpn_ctx *ovpn, int cmd) +{ + return nl_ctx_alloc_flags(ovpn, cmd, 0); +} + +static void nl_ctx_free(struct nl_ctx *ctx) +{ + if (!ctx) + return; + + nl_socket_free(ctx->nl_sock); + nlmsg_free(ctx->nl_msg); + nl_cb_put(ctx->nl_cb); + free(ctx); +} + +static int ovpn_nl_cb_error(struct sockaddr_nl (*nla)__attribute__((unused)), + struct nlmsgerr *err, void *arg) +{ + struct nlmsghdr *nlh = (struct nlmsghdr *)err - 1; + struct nlattr *tb_msg[NLMSGERR_ATTR_MAX + 1]; + int len = nlh->nlmsg_len; + struct nlattr *attrs; + int *ret = arg; + int ack_len = sizeof(*nlh) + sizeof(int) + sizeof(*nlh); + + *ret = err->error; + + if (!(nlh->nlmsg_flags & NLM_F_ACK_TLVS)) + return NL_STOP; + + if (!(nlh->nlmsg_flags & NLM_F_CAPPED)) + ack_len += err->msg.nlmsg_len - sizeof(*nlh); + + if (len <= ack_len) + return NL_STOP; + + attrs = (void *)((unsigned char *)nlh + ack_len); + len -= ack_len; + + nla_parse(tb_msg, NLMSGERR_ATTR_MAX, attrs, len, NULL); + if (tb_msg[NLMSGERR_ATTR_MSG]) { + len = strnlen((char *)nla_data(tb_msg[NLMSGERR_ATTR_MSG]), + nla_len(tb_msg[NLMSGERR_ATTR_MSG])); + fprintf(stderr, "kernel error: %*s\n", len, + (char *)nla_data(tb_msg[NLMSGERR_ATTR_MSG])); + } + + if (tb_msg[NLMSGERR_ATTR_MISS_NEST]) { + fprintf(stderr, "missing required nesting type %u\n", + nla_get_u32(tb_msg[NLMSGERR_ATTR_MISS_NEST])); + } + + if (tb_msg[NLMSGERR_ATTR_MISS_TYPE]) { + fprintf(stderr, "missing required attribute type %u\n", + nla_get_u32(tb_msg[NLMSGERR_ATTR_MISS_TYPE])); + } + + return NL_STOP; +} + +static int ovpn_nl_cb_finish(struct nl_msg (*msg)__attribute__((unused)), + void *arg) +{ + int *status = arg; + + *status = 0; + return NL_SKIP; +} + +static int ovpn_nl_cb_ack(struct nl_msg (*msg)__attribute__((unused)), + void *arg) +{ + int *status = arg; + + *status = 0; + return NL_STOP; +} + +static int ovpn_nl_msg_send(struct nl_ctx *ctx, ovpn_nl_cb cb) +{ + int status = 1; + + nl_cb_err(ctx->nl_cb, NL_CB_CUSTOM, ovpn_nl_cb_error, &status); + nl_cb_set(ctx->nl_cb, NL_CB_FINISH, NL_CB_CUSTOM, ovpn_nl_cb_finish, + &status); + nl_cb_set(ctx->nl_cb, NL_CB_ACK, NL_CB_CUSTOM, ovpn_nl_cb_ack, &status); + + if (cb) + nl_cb_set(ctx->nl_cb, NL_CB_VALID, NL_CB_CUSTOM, cb, ctx); + + nl_send_auto_complete(ctx->nl_sock, ctx->nl_msg); + + while (status == 1) + ovpn_nl_recvmsgs(ctx); + + if (status < 0) + fprintf(stderr, "failed to send netlink message: %s (%d)\n", + strerror(-status), status); + + return status; +} + +static int ovpn_read_key(const char *file, struct ovpn_ctx *ctx) +{ + int idx_enc, idx_dec, ret = -1; + unsigned char *ckey = NULL; + __u8 *bkey = NULL; + size_t olen = 0; + long ckey_len; + FILE *fp; + + fp = fopen(file, "r"); + if (!fp) { + fprintf(stderr, "cannot open: %s\n", file); + return -1; + } + + /* get file size */ + fseek(fp, 0L, SEEK_END); + ckey_len = ftell(fp); + rewind(fp); + + /* if the file is longer, let's just read a portion */ + if (ckey_len > 256) + ckey_len = 256; + + ckey = malloc(ckey_len); + if (!ckey) + goto err; + + ret = fread(ckey, 1, ckey_len, fp); + if (ret != ckey_len) { + fprintf(stderr, + "couldn't read enough data from key file: %dbytes read\n", + ret); + goto err; + } + + olen = 0; + ret = mbedtls_base64_decode(NULL, 0, &olen, ckey, ckey_len); + if (ret != MBEDTLS_ERR_BASE64_BUFFER_TOO_SMALL) { + char buf[256]; + + mbedtls_strerror(ret, buf, sizeof(buf)); + fprintf(stderr, "unexpected base64 error1: %s (%d)\n", buf, + ret); + + goto err; + } + + bkey = malloc(olen); + if (!bkey) { + fprintf(stderr, "cannot allocate binary key buffer\n"); + goto err; + } + + ret = mbedtls_base64_decode(bkey, olen, &olen, ckey, ckey_len); + if (ret) { + char buf[256]; + + mbedtls_strerror(ret, buf, sizeof(buf)); + fprintf(stderr, "unexpected base64 error2: %s (%d)\n", buf, + ret); + + goto err; + } + + if (olen < 2 * KEY_LEN + NONCE_LEN) { + fprintf(stderr, + "not enough data in key file, found %zdB but needs %dB\n", + olen, 2 * KEY_LEN + NONCE_LEN); + goto err; + } + + switch (ctx->key_dir) { + case KEY_DIR_IN: + idx_enc = 0; + idx_dec = 1; + break; + case KEY_DIR_OUT: + idx_enc = 1; + idx_dec = 0; + break; + } + + memcpy(ctx->key_enc, bkey + KEY_LEN * idx_enc, KEY_LEN); + memcpy(ctx->key_dec, bkey + KEY_LEN * idx_dec, KEY_LEN); + memcpy(ctx->nonce, bkey + 2 * KEY_LEN, NONCE_LEN); + + ret = 0; + +err: + fclose(fp); + free(bkey); + free(ckey); + + return ret; +} + +static int ovpn_read_cipher(const char *cipher, struct ovpn_ctx *ctx) +{ + if (strcmp(cipher, "aes") == 0) + ctx->cipher = OVPN_CIPHER_ALG_AES_GCM; + else if (strcmp(cipher, "chachapoly") == 0) + ctx->cipher = OVPN_CIPHER_ALG_CHACHA20_POLY1305; + else if (strcmp(cipher, "none") == 0) + ctx->cipher = OVPN_CIPHER_ALG_NONE; + else + return -ENOTSUP; + + return 0; +} + +static int ovpn_read_key_direction(const char *dir, struct ovpn_ctx *ctx) +{ + int in_dir; + + in_dir = strtoll(dir, NULL, 10); + switch (in_dir) { + case KEY_DIR_IN: + case KEY_DIR_OUT: + ctx->key_dir = in_dir; + break; + default: + fprintf(stderr, + "invalid key direction provided. Can be 0 or 1 only\n"); + return -1; + } + + return 0; +} + +static int ovpn_socket(struct ovpn_ctx *ctx, sa_family_t family, int proto) +{ + struct sockaddr_storage local_sock; + struct sockaddr_in6 *in6; + struct sockaddr_in *in; + int ret, s, sock_type; + size_t sock_len; + + if (proto == IPPROTO_UDP) + sock_type = SOCK_DGRAM; + else if (proto == IPPROTO_TCP) + sock_type = SOCK_STREAM; + else + return -EINVAL; + + s = socket(family, sock_type, 0); + if (s < 0) { + perror("cannot create socket"); + return -1; + } + + memset((char *)&local_sock, 0, sizeof(local_sock)); + + switch (family) { + case AF_INET: + in = (struct sockaddr_in *)&local_sock; + in->sin_family = family; + in->sin_port = htons(ctx->lport); + in->sin_addr.s_addr = htonl(INADDR_ANY); + sock_len = sizeof(*in); + break; + case AF_INET6: + in6 = (struct sockaddr_in6 *)&local_sock; + in6->sin6_family = family; + in6->sin6_port = htons(ctx->lport); + in6->sin6_addr = in6addr_any; + sock_len = sizeof(*in6); + break; + default: + return -1; + } + + int opt = 1; + + ret = setsockopt(s, SOL_SOCKET, SO_REUSEADDR, &opt, sizeof(opt)); + + if (ret < 0) { + perror("setsockopt for SO_REUSEADDR"); + return ret; + } + + ret = setsockopt(s, SOL_SOCKET, SO_REUSEPORT, &opt, sizeof(opt)); + if (ret < 0) { + perror("setsockopt for SO_REUSEPORT"); + return ret; + } + + if (family == AF_INET6) { + opt = 0; + if (setsockopt(s, IPPROTO_IPV6, IPV6_V6ONLY, &opt, + sizeof(opt))) { + perror("failed to set IPV6_V6ONLY"); + return -1; + } + } + + ret = bind(s, (struct sockaddr *)&local_sock, sock_len); + if (ret < 0) { + perror("cannot bind socket"); + goto err_socket; + } + + ctx->socket = s; + ctx->sa_family = family; + return 0; + +err_socket: + close(s); + return -1; +} + +static int ovpn_udp_socket(struct ovpn_ctx *ctx, sa_family_t family) +{ + return ovpn_socket(ctx, family, IPPROTO_UDP); +} + +static int ovpn_listen(struct ovpn_ctx *ctx, sa_family_t family) +{ + int ret; + + ret = ovpn_socket(ctx, family, IPPROTO_TCP); + if (ret < 0) + return ret; + + ret = listen(ctx->socket, 10); + if (ret < 0) { + perror("listen"); + close(ctx->socket); + return -1; + } + + return 0; +} + +static int ovpn_accept(struct ovpn_ctx *ctx) +{ + socklen_t socklen; + int ret; + + socklen = sizeof(ctx->remote); + ret = accept(ctx->socket, (struct sockaddr *)&ctx->remote, &socklen); + if (ret < 0) { + perror("accept"); + goto err; + } + + fprintf(stderr, "Connection received!\n"); + + switch (socklen) { + case sizeof(struct sockaddr_in): + case sizeof(struct sockaddr_in6): + break; + default: + fprintf(stderr, "error: expecting IPv4 or IPv6 connection\n"); + close(ret); + ret = -EINVAL; + goto err; + } + + return ret; +err: + close(ctx->socket); + return ret; +} + +static int ovpn_connect(struct ovpn_ctx *ovpn) +{ + socklen_t socklen; + int s, ret; + + s = socket(ovpn->remote.in4.sin_family, SOCK_STREAM, 0); + if (s < 0) { + perror("cannot create socket"); + return -1; + } + + switch (ovpn->remote.in4.sin_family) { + case AF_INET: + socklen = sizeof(struct sockaddr_in); + break; + case AF_INET6: + socklen = sizeof(struct sockaddr_in6); + break; + default: + return -EOPNOTSUPP; + } + + ret = connect(s, (struct sockaddr *)&ovpn->remote, socklen); + if (ret < 0) { + perror("connect"); + goto err; + } + + fprintf(stderr, "connected\n"); + + ovpn->socket = s; + + return 0; +err: + close(s); + return ret; +} + +static int ovpn_new_peer(struct ovpn_ctx *ovpn, bool is_tcp) +{ + struct nlattr *attr; + struct nl_ctx *ctx; + size_t alen; + int ret = -1; + + ctx = nl_ctx_alloc(ovpn, OVPN_CMD_SET_PEER); + if (!ctx) + return -ENOMEM; + + attr = nla_nest_start(ctx->nl_msg, OVPN_A_PEER); + NLA_PUT_U32(ctx->nl_msg, OVPN_A_PEER_ID, ovpn->peer_id); + NLA_PUT_U32(ctx->nl_msg, OVPN_A_PEER_SOCKET, ovpn->socket); + + if (!is_tcp) { + switch (ovpn->remote.in4.sin_family) { + case AF_INET: + alen = sizeof(struct sockaddr_in); + break; + case AF_INET6: + alen = sizeof(struct sockaddr_in6); + break; + default: + fprintf(stderr, + "Invalid family for remote socket address\n"); + goto nla_put_failure; + } + NLA_PUT(ctx->nl_msg, OVPN_A_PEER_SOCKADDR_REMOTE, alen, + &ovpn->remote); + } + + if (ovpn->peer_ip_set) { + switch (ovpn->peer_ip.in4.sin_family) { + case AF_INET: + NLA_PUT_U32(ctx->nl_msg, OVPN_A_PEER_VPN_IPV4, + ovpn->peer_ip.in4.sin_addr.s_addr); + break; + case AF_INET6: + NLA_PUT(ctx->nl_msg, OVPN_A_PEER_VPN_IPV6, + sizeof(struct in6_addr), + &ovpn->peer_ip.in6.sin6_addr); + break; + default: + fprintf(stderr, "Invalid family for peer address\n"); + goto nla_put_failure; + } + } + + nla_nest_end(ctx->nl_msg, attr); + + ret = ovpn_nl_msg_send(ctx, NULL); +nla_put_failure: + nl_ctx_free(ctx); + return ret; +} + +static int ovpn_set_peer(struct ovpn_ctx *ovpn) +{ + struct nlattr *attr; + struct nl_ctx *ctx; + int ret = -1; + + ctx = nl_ctx_alloc(ovpn, OVPN_CMD_SET_PEER); + if (!ctx) + return -ENOMEM; + + attr = nla_nest_start(ctx->nl_msg, OVPN_A_PEER); + NLA_PUT_U32(ctx->nl_msg, OVPN_A_PEER_ID, ovpn->peer_id); + NLA_PUT_U32(ctx->nl_msg, OVPN_A_PEER_KEEPALIVE_INTERVAL, + ovpn->keepalive_interval); + NLA_PUT_U32(ctx->nl_msg, OVPN_A_PEER_KEEPALIVE_TIMEOUT, + ovpn->keepalive_timeout); + nla_nest_end(ctx->nl_msg, attr); + + ret = ovpn_nl_msg_send(ctx, NULL); +nla_put_failure: + nl_ctx_free(ctx); + return ret; +} + +static int ovpn_del_peer(struct ovpn_ctx *ovpn) +{ + struct nlattr *attr; + struct nl_ctx *ctx; + int ret = -1; + + ctx = nl_ctx_alloc(ovpn, OVPN_CMD_DEL_PEER); + if (!ctx) + return -ENOMEM; + + attr = nla_nest_start(ctx->nl_msg, OVPN_A_PEER); + NLA_PUT_U32(ctx->nl_msg, OVPN_A_PEER_ID, ovpn->peer_id); + nla_nest_end(ctx->nl_msg, attr); + + ret = ovpn_nl_msg_send(ctx, NULL); +nla_put_failure: + nl_ctx_free(ctx); + return ret; +} + +static int ovpn_handle_peer(struct nl_msg *msg, void *arg) +{ + struct nlattr *attrs_peer[OVPN_A_PEER_MAX + 1]; + struct genlmsghdr *gnlh = nlmsg_data(nlmsg_hdr(msg)); + struct nlattr *attrs[OVPN_A_MAX + 1]; + __u16 port = 0; + + nla_parse(attrs, OVPN_A_MAX, genlmsg_attrdata(gnlh, 0), + genlmsg_attrlen(gnlh, 0), NULL); + + if (!attrs[OVPN_A_PEER]) { + fprintf(stderr, "no packet content in netlink message\n"); + return NL_SKIP; + } + + nla_parse(attrs_peer, OVPN_A_PEER_MAX, nla_data(attrs[OVPN_A_PEER]), + nla_len(attrs[OVPN_A_PEER]), NULL); + + if (attrs_peer[OVPN_A_PEER_ID]) + fprintf(stderr, "* Peer %u\n", + nla_get_u32(attrs_peer[OVPN_A_PEER_ID])); + + if (attrs_peer[OVPN_A_PEER_VPN_IPV4]) { + char buf[INET_ADDRSTRLEN]; + + inet_ntop(AF_INET, nla_data(attrs_peer[OVPN_A_PEER_VPN_IPV4]), + buf, sizeof(buf)); + fprintf(stderr, "\tVPN IPv4: %s\n", buf); + } + + if (attrs_peer[OVPN_A_PEER_VPN_IPV6]) { + char buf[INET6_ADDRSTRLEN]; + + inet_ntop(AF_INET6, nla_data(attrs_peer[OVPN_A_PEER_VPN_IPV6]), + buf, sizeof(buf)); + fprintf(stderr, "\tVPN IPv6: %s\n", buf); + } + + if (attrs_peer[OVPN_A_PEER_LOCAL_PORT]) + port = ntohs(nla_get_u16(attrs_peer[OVPN_A_PEER_LOCAL_PORT])); + + if (attrs_peer[OVPN_A_PEER_SOCKADDR_REMOTE]) { + struct sockaddr_storage ss; + struct sockaddr_in6 *in6 = (struct sockaddr_in6 *)&ss; + struct sockaddr_in *in = (struct sockaddr_in *)&ss; + + memcpy(&ss, nla_data(attrs_peer[OVPN_A_PEER_SOCKADDR_REMOTE]), + nla_len(attrs_peer[OVPN_A_PEER_SOCKADDR_REMOTE])); + + if (in->sin_family == AF_INET) { + char buf[INET_ADDRSTRLEN]; + + if (attrs_peer[OVPN_A_PEER_LOCAL_IP]) { + void *p = attrs_peer[OVPN_A_PEER_LOCAL_IP]; + + inet_ntop(AF_INET, nla_data(p), buf, + sizeof(buf)); + fprintf(stderr, "\tLocal: %s:%hu\n", buf, + port); + } + + inet_ntop(AF_INET, &in->sin_addr, buf, sizeof(buf)); + fprintf(stderr, "\tRemote: %s:%u\n", buf, + ntohs(in->sin_port)); + } else if (in->sin_family == AF_INET6) { + char buf[INET6_ADDRSTRLEN]; + + if (attrs_peer[OVPN_A_PEER_LOCAL_IP]) { + void *p = attrs_peer[OVPN_A_PEER_LOCAL_IP]; + + inet_ntop(AF_INET6, nla_data(p), buf, + sizeof(buf)); + fprintf(stderr, "\tLocal: %s\n", buf); + } + + inet_ntop(AF_INET6, &in6->sin6_addr, buf, sizeof(buf)); + fprintf(stderr, "\tRemote: %s:%u (scope-id: %u)\n", buf, + ntohs(in6->sin6_port), + ntohl(in6->sin6_scope_id)); + } + } + + if (attrs_peer[OVPN_A_PEER_KEEPALIVE_INTERVAL]) { + void *p = attrs_peer[OVPN_A_PEER_KEEPALIVE_INTERVAL]; + + fprintf(stderr, "\tKeepalive interval: %u sec\n", + nla_get_u32(p)); + } + + if (attrs_peer[OVPN_A_PEER_KEEPALIVE_TIMEOUT]) + fprintf(stderr, "\tKeepalive timeout: %u sec\n", + nla_get_u32(attrs_peer[OVPN_A_PEER_KEEPALIVE_TIMEOUT])); + + if (attrs_peer[OVPN_A_PEER_VPN_RX_BYTES]) + fprintf(stderr, "\tVPN RX bytes: %" PRIu64 "\n", + nla_get_uint(attrs_peer[OVPN_A_PEER_VPN_RX_BYTES])); + + if (attrs_peer[OVPN_A_PEER_VPN_TX_BYTES]) + fprintf(stderr, "\tVPN TX bytes: %" PRIu64 "\n", + nla_get_uint(attrs_peer[OVPN_A_PEER_VPN_TX_BYTES])); + + if (attrs_peer[OVPN_A_PEER_VPN_RX_PACKETS]) + fprintf(stderr, "\tVPN RX packets: %" PRIu64 "\n", + nla_get_uint(attrs_peer[OVPN_A_PEER_VPN_RX_PACKETS])); + + if (attrs_peer[OVPN_A_PEER_VPN_TX_PACKETS]) + fprintf(stderr, "\tVPN TX packets: %" PRIu64 "\n", + nla_get_uint(attrs_peer[OVPN_A_PEER_VPN_TX_PACKETS])); + + if (attrs_peer[OVPN_A_PEER_LINK_RX_BYTES]) + fprintf(stderr, "\tLINK RX bytes: %" PRIu64 "\n", + nla_get_uint(attrs_peer[OVPN_A_PEER_LINK_RX_BYTES])); + + if (attrs_peer[OVPN_A_PEER_LINK_TX_BYTES]) + fprintf(stderr, "\tLINK TX bytes: %" PRIu64 "\n", + nla_get_uint(attrs_peer[OVPN_A_PEER_LINK_TX_BYTES])); + + if (attrs_peer[OVPN_A_PEER_LINK_RX_PACKETS]) + fprintf(stderr, "\tLINK RX packets: %" PRIu64 "\n", + nla_get_uint(attrs_peer[OVPN_A_PEER_LINK_RX_PACKETS])); + + if (attrs_peer[OVPN_A_PEER_LINK_TX_PACKETS]) + fprintf(stderr, "\tLINK TX packets: %" PRIu64 "\n", + nla_get_uint(attrs_peer[OVPN_A_PEER_LINK_TX_PACKETS])); + + return NL_SKIP; +} + +static int ovpn_get_peer(struct ovpn_ctx *ovpn) +{ + int flags = 0, ret = -1; + struct nlattr *attr; + struct nl_ctx *ctx; + + if (ovpn->peer_id == PEER_ID_UNDEF) + flags = NLM_F_DUMP; + + ctx = nl_ctx_alloc_flags(ovpn, OVPN_CMD_GET_PEER, flags); + if (!ctx) + return -ENOMEM; + + if (ovpn->peer_id != PEER_ID_UNDEF) { + attr = nla_nest_start(ctx->nl_msg, OVPN_A_PEER); + NLA_PUT_U32(ctx->nl_msg, OVPN_A_PEER_ID, ovpn->peer_id); + nla_nest_end(ctx->nl_msg, attr); + } + + ret = ovpn_nl_msg_send(ctx, ovpn_handle_peer); +nla_put_failure: + nl_ctx_free(ctx); + return ret; +} + +static int ovpn_new_key(struct ovpn_ctx *ovpn) +{ + struct nlattr *peer, *keyconf, *key_dir; + struct nl_ctx *ctx; + int ret = -1; + + ctx = nl_ctx_alloc(ovpn, OVPN_CMD_SET_KEY); + if (!ctx) + return -ENOMEM; + + peer = nla_nest_start(ctx->nl_msg, OVPN_A_PEER); + NLA_PUT_U32(ctx->nl_msg, OVPN_A_PEER_ID, ovpn->peer_id); + + keyconf = nla_nest_start(ctx->nl_msg, OVPN_A_PEER_KEYCONF); + NLA_PUT_U32(ctx->nl_msg, OVPN_A_KEYCONF_SLOT, ovpn->key_slot); + NLA_PUT_U32(ctx->nl_msg, OVPN_A_KEYCONF_KEY_ID, ovpn->key_id); + NLA_PUT_U32(ctx->nl_msg, OVPN_A_KEYCONF_CIPHER_ALG, ovpn->cipher); + + key_dir = nla_nest_start(ctx->nl_msg, OVPN_A_KEYCONF_ENCRYPT_DIR); + NLA_PUT(ctx->nl_msg, OVPN_A_KEYDIR_CIPHER_KEY, KEY_LEN, ovpn->key_enc); + NLA_PUT(ctx->nl_msg, OVPN_A_KEYDIR_NONCE_TAIL, NONCE_LEN, ovpn->nonce); + nla_nest_end(ctx->nl_msg, key_dir); + + key_dir = nla_nest_start(ctx->nl_msg, OVPN_A_KEYCONF_DECRYPT_DIR); + NLA_PUT(ctx->nl_msg, OVPN_A_KEYDIR_CIPHER_KEY, KEY_LEN, ovpn->key_dec); + NLA_PUT(ctx->nl_msg, OVPN_A_KEYDIR_NONCE_TAIL, NONCE_LEN, ovpn->nonce); + nla_nest_end(ctx->nl_msg, key_dir); + + nla_nest_end(ctx->nl_msg, keyconf); + + nla_nest_end(ctx->nl_msg, peer); + + ret = ovpn_nl_msg_send(ctx, NULL); +nla_put_failure: + nl_ctx_free(ctx); + return ret; +} + +static int ovpn_del_key(struct ovpn_ctx *ovpn) +{ + struct nlattr *peer, *keyconf; + struct nl_ctx *ctx; + int ret = -1; + + ctx = nl_ctx_alloc(ovpn, OVPN_CMD_DEL_KEY); + if (!ctx) + return -ENOMEM; + + peer = nla_nest_start(ctx->nl_msg, OVPN_A_PEER); + NLA_PUT_U32(ctx->nl_msg, OVPN_A_PEER_ID, ovpn->peer_id); + + keyconf = nla_nest_start(ctx->nl_msg, OVPN_A_PEER_KEYCONF); + NLA_PUT_U32(ctx->nl_msg, OVPN_A_KEYCONF_SLOT, OVPN_KEY_SLOT_PRIMARY); + nla_nest_end(ctx->nl_msg, keyconf); + + nla_nest_end(ctx->nl_msg, peer); + + ret = ovpn_nl_msg_send(ctx, NULL); +nla_put_failure: + nl_ctx_free(ctx); + return ret; +} + +static int ovpn_swap_keys(struct ovpn_ctx *ovpn) +{ + struct nlattr *peer; + struct nl_ctx *ctx; + int ret = -1; + + ctx = nl_ctx_alloc(ovpn, OVPN_CMD_SWAP_KEYS); + if (!ctx) + return -ENOMEM; + + peer = nla_nest_start(ctx->nl_msg, OVPN_A_PEER); + NLA_PUT_U32(ctx->nl_msg, OVPN_A_PEER_ID, ovpn->peer_id); + nla_nest_end(ctx->nl_msg, peer); + + ret = ovpn_nl_msg_send(ctx, NULL); +nla_put_failure: + nl_ctx_free(ctx); + return ret; +} + +static int ovpn_handle_iface(struct nl_msg *msg, void *arg) +{ + struct genlmsghdr *gnlh = nlmsg_data(nlmsg_hdr(msg)); + struct nlattr *attrs[OVPN_A_MAX + 1]; + + nla_parse(attrs, OVPN_A_MAX, genlmsg_attrdata(gnlh, 0), + genlmsg_attrlen(gnlh, 0), NULL); + + if (!attrs[OVPN_A_IFNAME]) { + fprintf(stderr, "no ifname in netlink message\n"); + return NL_SKIP; + } + + fprintf(stderr, "Created ifname: %s\n", + (char *)nla_data(attrs[OVPN_A_IFNAME])); + + return NL_SKIP; +} + +static int ovpn_new_iface(struct ovpn_ctx *ovpn) +{ + struct nl_ctx *ctx; + int ret = -1; + + ctx = nl_ctx_alloc(ovpn, OVPN_CMD_NEW_IFACE); + if (!ctx) + return -ENOMEM; + + NLA_PUT(ctx->nl_msg, OVPN_A_IFNAME, strlen(ovpn->ifname) + 1, + ovpn->ifname); + + if (ovpn->mode_set) + NLA_PUT_U32(ctx->nl_msg, OVPN_A_MODE, ovpn->mode); + + fprintf(stdout, "Creating interface %s with mode %u\n", ovpn->ifname, + ovpn->mode); + + ret = ovpn_nl_msg_send(ctx, ovpn_handle_iface); +nla_put_failure: + nl_ctx_free(ctx); + return ret; +} + +static int ovpn_del_iface(struct ovpn_ctx *ovpn) +{ + struct nl_ctx *ctx; + int ret = -1; + + ctx = nl_ctx_alloc(ovpn, OVPN_CMD_DEL_IFACE); + if (!ctx) + return -ENOMEM; + + ret = ovpn_nl_msg_send(ctx, NULL); + nl_ctx_free(ctx); + return ret; +} + +static int nl_seq_check(struct nl_msg *msg, void *arg) +{ + return NL_OK; +} + +struct mcast_handler_args { + const char *group; + int id; +}; + +static int mcast_family_handler(struct nl_msg *msg, void *arg) +{ + struct mcast_handler_args *grp = arg; + struct nlattr *tb[CTRL_ATTR_MAX + 1]; + struct genlmsghdr *gnlh = nlmsg_data(nlmsg_hdr(msg)); + struct nlattr *mcgrp; + int rem_mcgrp; + + nla_parse(tb, CTRL_ATTR_MAX, genlmsg_attrdata(gnlh, 0), + genlmsg_attrlen(gnlh, 0), NULL); + + if (!tb[CTRL_ATTR_MCAST_GROUPS]) + return NL_SKIP; + + nla_for_each_nested(mcgrp, tb[CTRL_ATTR_MCAST_GROUPS], rem_mcgrp) { + struct nlattr *tb_mcgrp[CTRL_ATTR_MCAST_GRP_MAX + 1]; + + nla_parse(tb_mcgrp, CTRL_ATTR_MCAST_GRP_MAX, + nla_data(mcgrp), nla_len(mcgrp), NULL); + + if (!tb_mcgrp[CTRL_ATTR_MCAST_GRP_NAME] || + !tb_mcgrp[CTRL_ATTR_MCAST_GRP_ID]) + continue; + if (strncmp(nla_data(tb_mcgrp[CTRL_ATTR_MCAST_GRP_NAME]), + grp->group, nla_len(tb_mcgrp[CTRL_ATTR_MCAST_GRP_NAME]))) + continue; + grp->id = nla_get_u32(tb_mcgrp[CTRL_ATTR_MCAST_GRP_ID]); + break; + } + + return NL_SKIP; +} + +static int mcast_error_handler(struct sockaddr_nl *nla, struct nlmsgerr *err, + void *arg) +{ + int *ret = arg; + + *ret = err->error; + return NL_STOP; +} + +static int mcast_ack_handler(struct nl_msg *msg, void *arg) +{ + int *ret = arg; + + *ret = 0; + return NL_STOP; +} + +static int ovpn_handle_msg(struct nl_msg *msg, void *arg) +{ + struct genlmsghdr *gnlh = nlmsg_data(nlmsg_hdr(msg)); + struct nlattr *attrs[OVPN_A_MAX + 1]; + struct nlmsghdr *nlh = nlmsg_hdr(msg); + //enum ovpn_del_peer_reason reason; + char ifname[IF_NAMESIZE]; + __u32 ifindex; + + fprintf(stderr, "received message from ovpn-dco\n"); + + if (!genlmsg_valid_hdr(nlh, 0)) { + fprintf(stderr, "invalid header\n"); + return NL_STOP; + } + + if (nla_parse(attrs, OVPN_A_MAX, genlmsg_attrdata(gnlh, 0), + genlmsg_attrlen(gnlh, 0), NULL)) { + fprintf(stderr, "received bogus data from ovpn-dco\n"); + return NL_STOP; + } + + if (!attrs[OVPN_A_IFINDEX]) { + fprintf(stderr, "no ifindex in this message\n"); + return NL_STOP; + } + + ifindex = nla_get_u32(attrs[OVPN_A_IFINDEX]); + if (!if_indextoname(ifindex, ifname)) { + fprintf(stderr, "cannot resolve ifname for ifindex: %u\n", + ifindex); + return NL_STOP; + } + + switch (gnlh->cmd) { + case OVPN_CMD_DEL_PEER: + /*if (!attrs[OVPN_A_DEL_PEER_REASON]) { + * fprintf(stderr, "no reason in DEL_PEER message\n"); + * return NL_STOP; + *} + * + *reason = nla_get_u8(attrs[OVPN_A_DEL_PEER_REASON]); + *fprintf(stderr, + * "received CMD_DEL_PEER, ifname: %s reason: %d\n", + * ifname, reason); + */ + fprintf(stdout, "received CMD_DEL_PEER\n"); + break; + default: + fprintf(stderr, "received unknown command: %d\n", gnlh->cmd); + return NL_STOP; + } + + return NL_OK; +} + +static int ovpn_get_mcast_id(struct nl_sock *sock, const char *family, + const char *group) +{ + struct nl_msg *msg; + struct nl_cb *cb; + int ret, ctrlid; + struct mcast_handler_args grp = { + .group = group, + .id = -ENOENT, + }; + + msg = nlmsg_alloc(); + if (!msg) + return -ENOMEM; + + cb = nl_cb_alloc(NL_CB_DEFAULT); + if (!cb) { + ret = -ENOMEM; + goto out_fail_cb; + } + + ctrlid = genl_ctrl_resolve(sock, "nlctrl"); + + genlmsg_put(msg, 0, 0, ctrlid, 0, 0, CTRL_CMD_GETFAMILY, 0); + + ret = -ENOBUFS; + NLA_PUT_STRING(msg, CTRL_ATTR_FAMILY_NAME, family); + + ret = nl_send_auto_complete(sock, msg); + if (ret < 0) + goto nla_put_failure; + + ret = 1; + + nl_cb_err(cb, NL_CB_CUSTOM, mcast_error_handler, &ret); + nl_cb_set(cb, NL_CB_ACK, NL_CB_CUSTOM, mcast_ack_handler, &ret); + nl_cb_set(cb, NL_CB_VALID, NL_CB_CUSTOM, mcast_family_handler, &grp); + + while (ret > 0) + nl_recvmsgs(sock, cb); + + if (ret == 0) + ret = grp.id; + nla_put_failure: + nl_cb_put(cb); + out_fail_cb: + nlmsg_free(msg); + return ret; +} + +static void ovpn_listen_mcast(void) +{ + struct nl_sock *sock; + struct nl_cb *cb; + int mcid, ret; + + sock = nl_socket_alloc(); + if (!sock) { + fprintf(stderr, "cannot allocate netlink socket\n"); + goto err_free; + } + + nl_socket_set_buffer_size(sock, 8192, 8192); + + ret = genl_connect(sock); + if (ret < 0) { + fprintf(stderr, "cannot connect to generic netlink: %s\n", + nl_geterror(ret)); + goto err_free; + } + + mcid = ovpn_get_mcast_id(sock, OVPN_FAMILY_NAME, OVPN_MCGRP_PEERS); + if (mcid < 0) { + fprintf(stderr, "cannot get mcast group: %s\n", + nl_geterror(mcid)); + goto err_free; + } + + ret = nl_socket_add_membership(sock, mcid); + if (ret) { + fprintf(stderr, "failed to join mcast group: %d\n", ret); + goto err_free; + } + + ret = 0; + cb = nl_cb_alloc(NL_CB_DEFAULT); + nl_cb_set(cb, NL_CB_SEQ_CHECK, NL_CB_CUSTOM, nl_seq_check, NULL); + nl_cb_set(cb, NL_CB_VALID, NL_CB_CUSTOM, ovpn_handle_msg, &ret); + nl_cb_err(cb, NL_CB_CUSTOM, ovpn_nl_cb_error, &ret); + + while (ret != -EINTR) + ret = nl_recvmsgs(sock, cb); + + nl_cb_put(cb); +err_free: + nl_socket_free(sock); +} + +static void usage(const char *cmd) +{ + fprintf(stderr, "Error: invalid arguments.\n\n"); + fprintf(stderr, + "Usage %s <iface> <connect|listen|new_peer|new_multi_peer|set_peer|del_peer|new_key|del_key|recv|send|listen_mcast> [arguments..]\n", + cmd); + fprintf(stderr, "\tiface: tun interface name\n\n"); + + fprintf(stderr, + "* connect <peer_id> <raddr> <rport> <key file>: start connecting peer of TCP-based VPN session\n"); + fprintf(stderr, "\tpeer-id: peer ID of the connecting peer\n"); + fprintf(stderr, "\tremote-addr: peer IP address\n"); + fprintf(stderr, "\tremote-port: peer TCP port\n"); + + fprintf(stderr, + "* listen <lport> <peers_file>: listen for incoming peer TCP connections\n"); + fprintf(stderr, "\tlport: src TCP port\n"); + fprintf(stderr, + "\tpeers_file: file containing one peer per line: Line format:\n"); + fprintf(stderr, "\t\t<peer_id> <vpnaddr>\n\n"); + + fprintf(stderr, + "* new_peer <lport> <peer-id> <raddr> <rport> [vpnaddr]: add new peer\n"); + fprintf(stderr, + "\tpeer-id: peer ID to be used in data packets to/from this peer\n"); + fprintf(stderr, "\tlocal-port: local UDP port\n"); + fprintf(stderr, "\tremote-addr: peer IP address\n"); + fprintf(stderr, "\tremote-port: peer UDP port\n"); + fprintf(stderr, "\tvpnaddr: peer VPN IP\n\n"); + + fprintf(stderr, + "* new_multi_peer <lport> <file>: add multiple peers as listed in the file\n"); + fprintf(stderr, "\tlport: local UDP port to bind to\n"); + fprintf(stderr, + "\tfile: text file containing one peer per line. Line format:\n"); + fprintf(stderr, "\t\t<peer-id> <raddr> <rport> <vpnaddr>\n\n"); + + fprintf(stderr, + "* set_peer <peer-id> <keepalive_interval> <keepalive_timeout>: set peer attributes\n"); + fprintf(stderr, "\tpeer-id: peer ID of the peer to modify\n"); + fprintf(stderr, + "\tkeepalive_interval: interval for sending ping messages\n"); + fprintf(stderr, + "\tkeepalive_timeout: time after which a peer is timed out\n\n"); + + fprintf(stderr, "* del_peer <peer-id>: delete peer\n"); + fprintf(stderr, "\tpeer-id: peer ID of the peer to delete\n\n"); + + fprintf(stderr, + "* new_key <peer-id> <slot> <key_id> <cipher> <key_dir> <key_file>: set data channel key\n"); + fprintf(stderr, + "\tpeer-id: peer ID of the peer to configure the key for\n"); + fprintf(stderr, + "\tcipher: cipher to use, supported: aes (AES-GCM), chachapoly (CHACHA20POLY1305), none\n"); + fprintf(stderr, + "\tkey_dir: key direction, must 0 on one host and 1 on the other\n"); + fprintf(stderr, "\tkey_file: file containing the pre-shared key\n\n"); + + fprintf(stderr, + "* del_key <peer-id>: erase existing data channel key\n"); + fprintf(stderr, "\tpeer-id: peer ID of the peer to modify\n\n"); + + fprintf(stderr, + "* swap_keys <peer-id>: swap primary and seconday key slots\n"); + fprintf(stderr, "\tpeer-id: peer ID of the peer to modify\n\n"); + + fprintf(stderr, + "* listen_mcast: listen to ovpn-dco netlink multicast messages\n"); +} + +static int ovpn_parse_remote(struct ovpn_ctx *ovpn, const char *host, + const char *service, const char *vpnip) +{ + int ret; + struct addrinfo *result; + struct addrinfo hints = { + .ai_family = ovpn->sa_family, + .ai_socktype = SOCK_DGRAM, + .ai_protocol = IPPROTO_UDP + }; + + if (host) { + ret = getaddrinfo(host, service, &hints, &result); + if (ret == EAI_NONAME || ret == EAI_FAIL) + return -1; + + if (!(result->ai_family == AF_INET && + result->ai_addrlen == sizeof(struct sockaddr_in)) && + !(result->ai_family == AF_INET6 && + result->ai_addrlen == sizeof(struct sockaddr_in6))) { + ret = -EINVAL; + goto out; + } + + memcpy(&ovpn->remote, result->ai_addr, result->ai_addrlen); + } + + if (vpnip) { + ret = getaddrinfo(vpnip, NULL, &hints, &result); + if (ret == EAI_NONAME || ret == EAI_FAIL) + return -1; + + if (!(result->ai_family == AF_INET && + result->ai_addrlen == sizeof(struct sockaddr_in)) && + !(result->ai_family == AF_INET6 && + result->ai_addrlen == sizeof(struct sockaddr_in6))) { + ret = -EINVAL; + goto out; + } + + memcpy(&ovpn->peer_ip, result->ai_addr, result->ai_addrlen); + ovpn->sa_family = result->ai_family; + + ovpn->peer_ip_set = true; + } + + ret = 0; +out: + freeaddrinfo(result); + return ret; +} + +static int ovpn_parse_new_peer(struct ovpn_ctx *ovpn, const char *peer_id, + const char *raddr, const char *rport, + const char *vpnip) +{ + ovpn->peer_id = strtoul(peer_id, NULL, 10); + if (errno == ERANGE) { + fprintf(stderr, "peer ID value out of range\n"); + return -1; + } + + return ovpn_parse_remote(ovpn, raddr, rport, vpnip); +} + +static void ovpn_send_tcp_data(int socket) +{ + uint16_t len = htons(1000); + uint8_t buf[1002]; + int ret; + + memcpy(buf, &len, sizeof(len)); + memset(buf + sizeof(len), 0x86, sizeof(buf) - sizeof(len)); + + ret = send(socket, buf, sizeof(buf), 0); + + fprintf(stdout, "Sent %u bytes over TCP socket\n", ret); +} + +static void ovpn_recv_tcp_data(int socket) +{ + uint8_t buf[1002]; + uint16_t len; + int ret; + + ret = recv(socket, buf, sizeof(buf), 0); + + if (ret < 2) { + fprintf(stderr, ">>>> Error while reading TCP data: %d\n", ret); + return; + } + + memcpy(&len, buf, sizeof(len)); + len = ntohs(len); + + fprintf(stdout, ">>>> Received %u bytes over TCP socket, header: %u\n", + ret, len); + +/* int i; + * for (i = 2; i < ret; i++) { + * fprintf(stdout, "0x%.2x ", buf[i]); + * if (i && !((i - 2) % 16)) + * fprintf(stdout, "\n"); + * } + * fprintf(stdout, "\n"); + */ +} + +static int ovpn_parse_set_peer(struct ovpn_ctx *ovpn, int argc, char *argv[]) +{ + if (argc < 5) { + usage(argv[0]); + return -1; + } + + ovpn->keepalive_interval = strtoul(argv[3], NULL, 10); + if (errno == ERANGE) { + fprintf(stderr, "keepalive interval value out of range\n"); + return -1; + } + + ovpn->keepalive_timeout = strtoul(argv[4], NULL, 10); + if (errno == ERANGE) { + fprintf(stderr, "keepalive interval value out of range\n"); + return -1; + } + + return 0; +} + +int main(int argc, char *argv[]) +{ + struct ovpn_ctx ovpn; +// struct nl_ctx *ctx; + int ret; + + if (argc < 2) { + usage(argv[0]); + return -1; + } + + memset(&ovpn, 0, sizeof(ovpn)); + ovpn.sa_family = AF_INET; + ovpn.cli_socket = -1; + + if (argc > 2) { + strscpy(ovpn.ifname, argv[2], IFNAMSIZ - 1); + ovpn.ifname[IFNAMSIZ - 1] = '\0'; + } + + /* all commands except new_iface expect a valid ifindex */ + if (strcmp(argv[1], "new_iface")) { + /* in this case a ifname MUST be defined */ + if (argc < 3) { + usage(argv[0]); + return -1; + } + + ovpn.ifindex = if_nametoindex(ovpn.ifname); + if (!ovpn.ifindex) { + fprintf(stderr, "cannot find interface: %s\n", + strerror(errno)); + return -1; + } + } + + if (!strcmp(argv[1], "new_iface")) { + if (argc > 3) { + if (!strcmp(argv[3], "P2P")) { + ovpn.mode = OVPN_MODE_P2P; + } else if (!strcmp(argv[3], "MP")) { + ovpn.mode = OVPN_MODE_MP; + } else { + fprintf(stderr, "Cannot parse iface mode: %s\n", + argv[3]); + return -1; + } + ovpn.mode_set = true; + } + + ret = ovpn_new_iface(&ovpn); + if (ret < 0) { + fprintf(stderr, "Cannot create interface %s: %d\n", + ovpn.ifname, ret); + return -1; + } + } else if (!strcmp(argv[1], "del_iface")) { + ret = ovpn_del_iface(&ovpn); + if (ret < 0) { + fprintf(stderr, "Cannot delete interface %s: %d\n", + ovpn.ifname, ret); + return -1; + } + } else if (!strcmp(argv[1], "listen")) { + char peer_id[10], vpnip[100]; + int n; + FILE *fp; + + if (argc < 4) { + usage(argv[0]); + return -1; + } + + ovpn.lport = strtoul(argv[3], NULL, 10); + if (errno == ERANGE || ovpn.lport > 65535) { + fprintf(stderr, "lport value out of range\n"); + return -1; + } + + if (argc > 4 && !strcmp(argv[4], "ipv6")) + ovpn.sa_family = AF_INET6; + + ret = ovpn_listen(&ovpn, ovpn.sa_family); + if (ret < 0) { + fprintf(stderr, "cannot listen on TCP socket\n"); + return ret; + } + + fp = fopen(argv[4], "r"); + if (!fp) { + fprintf(stderr, "cannot open file: %s\n", argv[4]); + return -1; + } + + while ((n = fscanf(fp, "%s %s\n", peer_id, vpnip)) == 2) { + struct ovpn_ctx peer_ctx = { 0 }; + + peer_ctx.ifindex = ovpn.ifindex; + peer_ctx.sa_family = ovpn.sa_family; + + peer_ctx.socket = ovpn_accept(&ovpn); + if (peer_ctx.socket < 0) { + fprintf(stderr, "cannot accept connection!\n"); + return -1; + } + + /* store the socket of the first peer to test TCP I/O */ + if (ovpn.cli_socket < 0) + ovpn.cli_socket = peer_ctx.socket; + + ret = ovpn_parse_new_peer(&peer_ctx, peer_id, NULL, + NULL, vpnip); + if (ret < 0) { + fprintf(stderr, "error while parsing line\n"); + return -1; + } + + ret = ovpn_new_peer(&peer_ctx, true); + if (ret < 0) { + fprintf(stderr, + "cannot add peer to VPN: %s %s\n", + peer_id, vpnip); + return ret; + } + } + + if (ovpn.cli_socket >= 0) + ovpn_recv_tcp_data(ovpn.cli_socket); + } else if (!strcmp(argv[1], "connect")) { + if (argc < 5) { + usage(argv[0]); + return -1; + } + + ovpn.sa_family = AF_INET; + + ret = ovpn_parse_new_peer(&ovpn, argv[3], argv[4], argv[5], + NULL); + if (ret < 0) { + fprintf(stderr, "Cannot parse remote peer data\n"); + return ret; + } + + ret = ovpn_connect(&ovpn); + if (ret < 0) { + fprintf(stderr, "cannot connect TCP socket\n"); + return ret; + } + + ret = ovpn_new_peer(&ovpn, true); + if (ret < 0) { + fprintf(stderr, "cannot add peer to VPN\n"); + close(ovpn.socket); + return ret; + } + + if (argc > 6) { + ovpn.key_slot = OVPN_KEY_SLOT_PRIMARY; + ovpn.key_id = 0; + ovpn.cipher = OVPN_CIPHER_ALG_AES_GCM; + ovpn.key_dir = KEY_DIR_OUT; + + ret = ovpn_read_key(argv[6], &ovpn); + if (ret) + return ret; + + ret = ovpn_new_key(&ovpn); + if (ret < 0) { + fprintf(stderr, "cannot set key\n"); + return ret; + } + + ovpn_send_tcp_data(ovpn.socket); + } + } else if (!strcmp(argv[1], "new_peer")) { + if (argc < 7) { + usage(argv[0]); + return -1; + } + + ovpn.lport = strtoul(argv[3], NULL, 10); + if (errno == ERANGE || ovpn.lport > 65535) { + fprintf(stderr, "lport value out of range\n"); + return -1; + } + + const char *vpnip = (argc > 7) ? argv[7] : NULL; + + ret = ovpn_parse_new_peer(&ovpn, argv[4], argv[5], argv[6], + vpnip); + if (ret < 0) + return ret; + + ret = ovpn_udp_socket(&ovpn, AF_INET6); //ovpn.sa_family ? + if (ret < 0) + return ret; + + ret = ovpn_new_peer(&ovpn, false); + if (ret < 0) { + fprintf(stderr, "cannot add peer to VPN\n"); + return ret; + } + } else if (!strcmp(argv[1], "new_multi_peer")) { + char peer_id[10], raddr[128], rport[10], vpnip[100]; + FILE *fp; + int n; + + if (argc < 5) { + usage(argv[0]); + return -1; + } + + ovpn.lport = strtoul(argv[3], NULL, 10); + if (errno == ERANGE || ovpn.lport > 65535) { + fprintf(stderr, "lport value out of range\n"); + return -1; + } + + fp = fopen(argv[4], "r"); + if (!fp) { + fprintf(stderr, "cannot open file: %s\n", argv[4]); + return -1; + } + + ret = ovpn_udp_socket(&ovpn, AF_INET6); + if (ret < 0) + return ret; + + while ((n = fscanf(fp, "%s %s %s %s\n", peer_id, raddr, rport, + vpnip)) == 4) { + struct ovpn_ctx peer_ctx = { 0 }; + + peer_ctx.ifindex = ovpn.ifindex; + peer_ctx.socket = ovpn.socket; + peer_ctx.sa_family = AF_UNSPEC; + + ret = ovpn_parse_new_peer(&peer_ctx, peer_id, raddr, + rport, vpnip); + if (ret < 0) { + fprintf(stderr, "error while parsing line\n"); + return -1; + } + + ret = ovpn_new_peer(&peer_ctx, false); + if (ret < 0) { + fprintf(stderr, + "cannot add peer to VPN: %s %s %s %s\n", + peer_id, raddr, rport, vpnip); + return ret; + } + } + } else if (!strcmp(argv[1], "set_peer")) { + ovpn.peer_id = strtoul(argv[3], NULL, 10); + if (errno == ERANGE) { + fprintf(stderr, "peer ID value out of range\n"); + return -1; + } + + argv++; + argc--; + + ret = ovpn_parse_set_peer(&ovpn, argc, argv); + if (ret < 0) + return ret; + + ret = ovpn_set_peer(&ovpn); + if (ret < 0) { + fprintf(stderr, "cannot set peer to VPN\n"); + return ret; + } + } else if (!strcmp(argv[1], "del_peer")) { + if (argc < 4) { + usage(argv[0]); + return -1; + } + + ovpn.peer_id = strtoul(argv[3], NULL, 10); + if (errno == ERANGE) { + fprintf(stderr, "peer ID value out of range\n"); + return -1; + } + + ret = ovpn_del_peer(&ovpn); + if (ret < 0) { + fprintf(stderr, "cannot delete peer to VPN\n"); + return ret; + } + } else if (!strcmp(argv[1], "get_peer")) { + ovpn.peer_id = PEER_ID_UNDEF; + if (argc > 3) + ovpn.peer_id = strtoul(argv[3], NULL, 10); + + fprintf(stderr, "List of peers connected to: %s\n", + ovpn.ifname); + + ret = ovpn_get_peer(&ovpn); + if (ret < 0) { + fprintf(stderr, "cannot get peer(s): %d\n", ret); + return ret; + } + } else if (!strcmp(argv[1], "new_key")) { + if (argc < 8) { + usage(argv[0]); + return -1; + } + + ovpn.peer_id = strtoul(argv[3], NULL, 10); + if (errno == ERANGE) { + fprintf(stderr, "peer ID value out of range\n"); + return -1; + } + + int slot = strtoul(argv[4], NULL, 10); + + if (errno == ERANGE || slot < 1 || slot > 2) { + fprintf(stderr, "ket slot out of range\n"); + return -1; + } + + switch (slot) { + case 1: + ovpn.key_slot = OVPN_KEY_SLOT_PRIMARY; + break; + case 2: + ovpn.key_slot = OVPN_KEY_SLOT_SECONDARY; + break; + } + + ovpn.key_id = strtoul(argv[5], NULL, 10); + if (errno == ERANGE || ovpn.key_id > 2) { + fprintf(stderr, "ket ID out of range\n"); + return -1; + } + + ret = ovpn_read_cipher(argv[6], &ovpn); + if (ret < 0) + return ret; + + ret = ovpn_read_key_direction(argv[7], &ovpn); + if (ret < 0) + return ret; + + ret = ovpn_read_key(argv[8], &ovpn); + if (ret) + return ret; + + ret = ovpn_new_key(&ovpn); + if (ret < 0) { + fprintf(stderr, "cannot set key\n"); + return ret; + } + } else if (!strcmp(argv[1], "del_key")) { + if (argc < 3) { + usage(argv[0]); + return -1; + } + + ovpn.peer_id = strtoul(argv[3], NULL, 10); + if (errno == ERANGE) { + fprintf(stderr, "peer ID value out of range\n"); + return -1; + } + + argv++; + argc--; + + ret = ovpn_del_key(&ovpn); + if (ret < 0) { + fprintf(stderr, "cannot delete key\n"); + return ret; + } + } else if (!strcmp(argv[1], "swap_keys")) { + if (argc < 3) { + usage(argv[0]); + return -1; + } + + ovpn.peer_id = strtoul(argv[3], NULL, 10); + if (errno == ERANGE) { + fprintf(stderr, "peer ID value out of range\n"); + return -1; + } + + argv++; + argc--; + + ret = ovpn_swap_keys(&ovpn); + if (ret < 0) { + fprintf(stderr, "cannot swap keys\n"); + return ret; + } + } else if (!strcmp(argv[1], "listen_mcast")) { + ovpn_listen_mcast(); + } else { + usage(argv[0]); + return -1; + } + + return ret; +} diff --git a/tools/testing/selftests/net/ovpn/tcp_peers.txt b/tools/testing/selftests/net/ovpn/tcp_peers.txt new file mode 100644 index 000000000000..d753eebe8716 --- /dev/null +++ b/tools/testing/selftests/net/ovpn/tcp_peers.txt @@ -0,0 +1,5 @@ +1 5.5.5.2 +2 5.5.5.3 +3 5.5.5.4 +4 5.5.5.5 +5 5.5.5.6 diff --git a/tools/testing/selftests/net/ovpn/udp_peers.txt b/tools/testing/selftests/net/ovpn/udp_peers.txt new file mode 100644 index 000000000000..32f14bd9347a --- /dev/null +++ b/tools/testing/selftests/net/ovpn/udp_peers.txt @@ -0,0 +1,5 @@ +1 10.10.1.2 1 5.5.5.2 +2 10.10.2.2 1 5.5.5.3 +3 10.10.3.2 1 5.5.5.4 +4 10.10.4.2 1 5.5.5.5 +5 10.10.5.2 1 5.5.5.6 -- 2.44.2

11 months, 1 week

1
0
0 0

[PATCH net-next v2 0/3] selftests/net: packetdrill: netns and two imports

by Willem de Bruijn

From: Willem de Bruijn <willemb(a)google.com> 1/3: run in nets, as discussed, and add missing CONFIGs 2/3: import tcp/zerocopy 3/3: import tcp/slow_start Willem de Bruijn (3): selftests/net: packetdrill: run in netns and expand config selftests/net: packetdrill: import tcp/zerocopy selftests/net: packetdrill: import tcp/slow_start .../selftests/net/packetdrill/Makefile | 1 + .../testing/selftests/net/packetdrill/config | 6 + .../selftests/net/packetdrill/ksft_runner.sh | 4 +- .../selftests/net/packetdrill/set_sysctls.py | 38 ++++++ ...tcp_slow_start_slow-start-ack-per-1pkt.pkt | 56 +++++++++ ...tart_slow-start-ack-per-2pkt-send-5pkt.pkt | 33 +++++ ...tart_slow-start-ack-per-2pkt-send-6pkt.pkt | 34 +++++ ...tcp_slow_start_slow-start-ack-per-2pkt.pkt | 42 +++++++ ...tcp_slow_start_slow-start-ack-per-4pkt.pkt | 35 ++++++ .../tcp_slow_start_slow-start-after-idle.pkt | 39 ++++++ ...slow_start_slow-start-after-win-update.pkt | 50 ++++++++ ...t_slow-start-app-limited-9-packets-out.pkt | 38 ++++++ .../tcp_slow_start_slow-start-app-limited.pkt | 36 ++++++ ..._slow_start_slow-start-fq-ack-per-2pkt.pkt | 63 ++++++++++ .../net/packetdrill/tcp_zerocopy_basic.pkt | 55 ++++++++ .../net/packetdrill/tcp_zerocopy_batch.pkt | 41 ++++++ .../net/packetdrill/tcp_zerocopy_client.pkt | 30 +++++ .../net/packetdrill/tcp_zerocopy_closed.pkt | 44 +++++++ .../packetdrill/tcp_zerocopy_epoll_edge.pkt | 61 +++++++++ .../tcp_zerocopy_epoll_exclusive.pkt | 63 ++++++++++ .../tcp_zerocopy_epoll_oneshot.pkt | 66 ++++++++++ .../tcp_zerocopy_fastopen-client.pkt | 56 +++++++++ .../tcp_zerocopy_fastopen-server.pkt | 44 +++++++ .../net/packetdrill/tcp_zerocopy_maxfrags.pkt | 118 ++++++++++++++++++ .../net/packetdrill/tcp_zerocopy_small.pkt | 57 +++++++++ 25 files changed, 1108 insertions(+), 2 deletions(-) create mode 100755 tools/testing/selftests/net/packetdrill/set_sysctls.py create mode 100644 tools/testing/selftests/net/packetdrill/tcp_slow_start_slow-start-ack-per-1pkt.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_slow_start_slow-start-ack-per-2pkt-send-5pkt.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_slow_start_slow-start-ack-per-2pkt-send-6pkt.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_slow_start_slow-start-ack-per-2pkt.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_slow_start_slow-start-ack-per-4pkt.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_slow_start_slow-start-after-idle.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_slow_start_slow-start-after-win-update.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_slow_start_slow-start-app-limited-9-packets-out.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_slow_start_slow-start-app-limited.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_slow_start_slow-start-fq-ack-per-2pkt.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_zerocopy_basic.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_zerocopy_batch.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_zerocopy_client.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_zerocopy_closed.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_zerocopy_epoll_edge.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_zerocopy_epoll_exclusive.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_zerocopy_epoll_oneshot.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_zerocopy_fastopen-client.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_zerocopy_fastopen-server.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_zerocopy_maxfrags.pkt create mode 100644 tools/testing/selftests/net/packetdrill/tcp_zerocopy_small.pkt -- 2.46.0.598.g6f2099f65c-goog

11 months, 1 week

4
8
0 0

kselftest/next kselftest-lib: 2 runs, 1 regressions (v6.11-rc1-21-ga0474b8d5974e)

by kernelci.org bot

kselftest/next kselftest-lib: 2 runs, 1 regressions (v6.11-rc1-21-ga0474b8d5974e) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions ----------------------------+------+-------------+----------+------------------------------+------------ stm32mp157a-dhcor-avenger96 | arm | lab-broonie | gcc-12 | multi_v7_defconfig+kselftest | 1 Details: https://kernelci.org/test/job/kselftest/branch/next/kernel/v6.11-rc1-21-ga0… Test: kselftest-lib Tree: kselftest Branch: next Describe: v6.11-rc1-21-ga0474b8d5974e URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git SHA: a0474b8d5974e142461ac7584c996feea167bcc1 Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions ----------------------------+------+-------------+----------+------------------------------+------------ stm32mp157a-dhcor-avenger96 | arm | lab-broonie | gcc-12 | multi_v7_defconfig+kselftest | 1 Details: https://kernelci.org/test/plan/id/66e88cdfac06e7d86dc8687f Results: 0 PASS, 1 FAIL, 0 SKIP Full config: multi_v7_defconfig+kselftest Compiler: gcc-12 (arm-linux-gnueabihf-gcc (Debian 12.2.0-14) 12.2.0) Plain log: https://storage.kernelci.org//kselftest/next/v6.11-rc1-21-ga0474b8d5974e/ar… HTML log: https://storage.kernelci.org//kselftest/next/v6.11-rc1-21-ga0474b8d5974e/ar… Rootfs: http://storage.kernelci.org/images/rootfs/debian/bookworm-kselftest/2024031… * kselftest-lib.login: https://kernelci.org/test/case/id/66e88cdfac06e7d86dc86880 failing since 48 days (last pass: v6.10-rc7-29-gdf09b0bb09ea, first fail: v6.11-rc1)

11 months, 1 week

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror September 2024