July 2024 - Linux-kselftest-mirror

[PATCH 0/2] selftest: rtc: Add rtc feature detection and rtc file check

by Joseph Jang

1. In order to make rtctest more explicit and robust, we propose to use RTC_PARAM_GET ioctl interface to check rtc alarm feature state before running alarm related tests. 2. The rtctest requires the read permission on /dev/rtc0. The rtctest will be skipped if the /dev/rtc0 is not readable. Joseph Jang (2): selftest: rtc: Add to check rtc alarm status for alarm related test selftest: rtc: Check if could access /dev/rtc0 before testing tools/testing/selftests/rtc/Makefile | 2 +- tools/testing/selftests/rtc/rtctest.c | 71 ++++++++++++++++++++++++++- 2 files changed, 71 insertions(+), 2 deletions(-) -- 2.34.1

6 hours, 35 minutes

3
15
0 0

[PATCH] lib: Move KUnit tests into tests/ subdirectory

by Kees Cook

Following from the recent KUnit file naming discussion[1], move all KUnit tests in lib/ into lib/tests/. Link: https://lore.kernel.org/lkml/20240720165441.it.320-kees@kernel.org/ [1] Signed-off-by: Kees Cook <kees(a)kernel.org> --- I can carry this in the hardening tree. To disrupt people as little as possible, I'm hoping to send this either at the end of -rc1 or early in -rc2. Cc: Andrew Morton <akpm(a)linux-foundation.org> Cc: Yury Norov <yury.norov(a)gmail.com> Cc: Rasmus Villemoes <linux(a)rasmusvillemoes.dk> Cc: David Gow <davidgow(a)google.com> Cc: "Jason A. Donenfeld" <Jason(a)zx2c4.com> Cc: Andy Shevchenko <andy(a)kernel.org> Cc: "Naveen N. Rao" <naveen.n.rao(a)linux.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy(a)intel.com> Cc: "David S. Miller" <davem(a)davemloft.net> Cc: Masami Hiramatsu <mhiramat(a)kernel.org> Cc: Mark Brown <broonie(a)kernel.org> Cc: Matti Vaittinen <mazziesaccount(a)gmail.com> Cc: linux-hardening(a)vger.kernel.org Cc: linux-kselftest(a)vger.kernel.org Cc: kunit-dev(a)googlegroups.com Cc: linux-trace-kernel(a)vger.kernel.org --- MAINTAINERS | 18 ++++++------- lib/Makefile | 35 +----------------------- lib/tests/Makefile | 37 ++++++++++++++++++++++++++ lib/{ => tests}/bitfield_kunit.c | 0 lib/{ => tests}/checksum_kunit.c | 0 lib/{ => tests}/cmdline_kunit.c | 0 lib/{ => tests}/cpumask_kunit.c | 0 lib/{ => tests}/fortify_kunit.c | 0 lib/{ => tests}/hashtable_test.c | 0 lib/{ => tests}/is_signed_type_kunit.c | 0 lib/{ => tests}/kunit_iov_iter.c | 0 lib/{ => tests}/list-test.c | 0 lib/{ => tests}/memcpy_kunit.c | 0 lib/{ => tests}/overflow_kunit.c | 0 lib/{ => tests}/siphash_kunit.c | 0 lib/{ => tests}/slub_kunit.c | 0 lib/{ => tests}/stackinit_kunit.c | 0 lib/{ => tests}/string_helpers_kunit.c | 0 lib/{ => tests}/string_kunit.c | 0 lib/{ => tests}/test_bits.c | 0 lib/{ => tests}/test_fprobe.c | 0 lib/{ => tests}/test_hash.c | 0 lib/{ => tests}/test_kprobes.c | 0 lib/{ => tests}/test_linear_ranges.c | 0 lib/{ => tests}/test_list_sort.c | 0 lib/{ => tests}/test_sort.c | 0 26 files changed, 47 insertions(+), 43 deletions(-) create mode 100644 lib/tests/Makefile rename lib/{ => tests}/bitfield_kunit.c (100%) rename lib/{ => tests}/checksum_kunit.c (100%) rename lib/{ => tests}/cmdline_kunit.c (100%) rename lib/{ => tests}/cpumask_kunit.c (100%) rename lib/{ => tests}/fortify_kunit.c (100%) rename lib/{ => tests}/hashtable_test.c (100%) rename lib/{ => tests}/is_signed_type_kunit.c (100%) rename lib/{ => tests}/kunit_iov_iter.c (100%) rename lib/{ => tests}/list-test.c (100%) rename lib/{ => tests}/memcpy_kunit.c (100%) rename lib/{ => tests}/overflow_kunit.c (100%) rename lib/{ => tests}/siphash_kunit.c (100%) rename lib/{ => tests}/slub_kunit.c (100%) rename lib/{ => tests}/stackinit_kunit.c (100%) rename lib/{ => tests}/string_helpers_kunit.c (100%) rename lib/{ => tests}/string_kunit.c (100%) rename lib/{ => tests}/test_bits.c (100%) rename lib/{ => tests}/test_fprobe.c (100%) rename lib/{ => tests}/test_hash.c (100%) rename lib/{ => tests}/test_kprobes.c (100%) rename lib/{ => tests}/test_linear_ranges.c (100%) rename lib/{ => tests}/test_list_sort.c (100%) rename lib/{ => tests}/test_sort.c (100%) diff --git a/MAINTAINERS b/MAINTAINERS index 8754ac2c259d..3f4b9d007cbb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3737,10 +3737,10 @@ F: include/vdso/bits.h F: lib/bitmap-str.c F: lib/bitmap.c F: lib/cpumask.c -F: lib/cpumask_kunit.c F: lib/find_bit.c F: lib/find_bit_benchmark.c F: lib/test_bitmap.c +F: lib/tests/cpumask_kunit.c F: tools/include/linux/bitfield.h F: tools/include/linux/bitmap.h F: tools/include/linux/bits.h @@ -8618,9 +8618,9 @@ L: linux-hardening(a)vger.kernel.org S: Supported T: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git for-next/hardening F: include/linux/fortify-string.h -F: lib/fortify_kunit.c -F: lib/memcpy_kunit.c F: lib/test_fortify/* +F: lib/tests/fortify_kunit.c +F: lib/tests/memcpy_kunit.c F: scripts/test_fortify.sh K: \b__NO_FORTIFY\b @@ -9246,9 +9246,9 @@ F: include/linux/string.h F: include/linux/string_choices.h F: include/linux/string_helpers.h F: lib/string.c -F: lib/string_kunit.c F: lib/string_helpers.c -F: lib/string_helpers_kunit.c +F: lib/tests/string_helpers_kunit.c +F: lib/tests/string_kunit.c F: scripts/coccinelle/api/string_choices.cocci GENERIC UIO DRIVER FOR PCI DEVICES @@ -12347,7 +12347,7 @@ F: Documentation/trace/kprobes.rst F: include/asm-generic/kprobes.h F: include/linux/kprobes.h F: kernel/kprobes.c -F: lib/test_kprobes.c +F: lib/tests/test_kprobes.c F: samples/kprobes KS0108 LCD CONTROLLER DRIVER @@ -12697,7 +12697,7 @@ M: Mark Brown <broonie(a)kernel.org> R: Matti Vaittinen <mazziesaccount(a)gmail.com> F: include/linux/linear_range.h F: lib/linear_ranges.c -F: lib/test_linear_ranges.c +F: lib/tests/test_linear_ranges.c LINUX FOR POWER MACINTOSH L: linuxppc-dev(a)lists.ozlabs.org @@ -12824,7 +12824,7 @@ M: David Gow <davidgow(a)google.com> L: linux-kselftest(a)vger.kernel.org L: kunit-dev(a)googlegroups.com S: Maintained -F: lib/list-test.c +F: lib/tests/list-test.c LITEX PLATFORM M: Karol Gugala <kgugala(a)antmicro.com> @@ -20498,7 +20498,7 @@ M: Jason A. Donenfeld <Jason(a)zx2c4.com> S: Maintained F: include/linux/siphash.h F: lib/siphash.c -F: lib/siphash_kunit.c +F: lib/tests/siphash_kunit.c SIS 190 ETHERNET DRIVER M: Francois Romieu <romieu(a)fr.zoreil.com> diff --git a/lib/Makefile b/lib/Makefile index 3b1769045651..f00fe120ee9e 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -49,9 +49,7 @@ obj-y += bcd.o sort.o parser.o debug_locks.o random32.o \ percpu-refcount.o rhashtable.o base64.o \ once.o refcount.o rcuref.o usercopy.o errseq.o bucket_locks.o \ generic-radix-tree.o bitmap-str.o -obj-$(CONFIG_STRING_KUNIT_TEST) += string_kunit.o obj-y += string_helpers.o -obj-$(CONFIG_STRING_HELPERS_KUNIT_TEST) += string_helpers_kunit.o obj-y += hexdump.o obj-$(CONFIG_TEST_HEXDUMP) += test_hexdump.o obj-y += kstrtox.o @@ -62,22 +60,17 @@ obj-$(CONFIG_TEST_DHRY) += test_dhry.o obj-$(CONFIG_TEST_FIRMWARE) += test_firmware.o obj-$(CONFIG_TEST_BITOPS) += test_bitops.o CFLAGS_test_bitops.o += -Werror -obj-$(CONFIG_CPUMASK_KUNIT_TEST) += cpumask_kunit.o obj-$(CONFIG_TEST_SYSCTL) += test_sysctl.o -obj-$(CONFIG_TEST_IOV_ITER) += kunit_iov_iter.o -obj-$(CONFIG_HASH_KUNIT_TEST) += test_hash.o obj-$(CONFIG_TEST_IDA) += test_ida.o obj-$(CONFIG_TEST_UBSAN) += test_ubsan.o CFLAGS_test_ubsan.o += $(call cc-disable-warning, vla) CFLAGS_test_ubsan.o += $(call cc-disable-warning, unused-but-set-variable) UBSAN_SANITIZE_test_ubsan.o := y obj-$(CONFIG_TEST_KSTRTOX) += test-kstrtox.o -obj-$(CONFIG_TEST_LIST_SORT) += test_list_sort.o obj-$(CONFIG_TEST_MIN_HEAP) += test_min_heap.o obj-$(CONFIG_TEST_LKM) += test_module.o obj-$(CONFIG_TEST_VMALLOC) += test_vmalloc.o obj-$(CONFIG_TEST_RHASHTABLE) += test_rhashtable.o -obj-$(CONFIG_TEST_SORT) += test_sort.o obj-$(CONFIG_TEST_USER_COPY) += test_user_copy.o obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_keys.o obj-$(CONFIG_TEST_STATIC_KEYS) += test_static_key_base.o @@ -104,10 +97,7 @@ obj-$(CONFIG_TEST_MEMINIT) += test_meminit.o obj-$(CONFIG_TEST_LOCKUP) += test_lockup.o obj-$(CONFIG_TEST_HMM) += test_hmm.o obj-$(CONFIG_TEST_FREE_PAGES) += test_free_pages.o -obj-$(CONFIG_KPROBES_SANITY_TEST) += test_kprobes.o obj-$(CONFIG_TEST_REF_TRACKER) += test_ref_tracker.o -CFLAGS_test_fprobe.o += $(CC_FLAGS_FTRACE) -obj-$(CONFIG_FPROBE_SANITY_TEST) += test_fprobe.o obj-$(CONFIG_TEST_OBJPOOL) += test_objpool.o obj-$(CONFIG_TEST_FPU) += test_fpu.o @@ -129,7 +119,7 @@ endif obj-$(CONFIG_DEBUG_INFO_REDUCED) += debug_info.o CFLAGS_debug_info.o += $(call cc-option, -femit-struct-debug-detailed=any) -obj-y += math/ crypto/ +obj-y += math/ crypto/ tests/ obj-$(CONFIG_GENERIC_IOMAP) += iomap.o obj-$(CONFIG_HAS_IOMEM) += iomap_copy.o devres.o @@ -366,29 +356,6 @@ obj-$(CONFIG_OBJAGG) += objagg.o # pldmfw library obj-$(CONFIG_PLDMFW) += pldmfw/ -# KUnit tests -CFLAGS_bitfield_kunit.o := $(DISABLE_STRUCTLEAK_PLUGIN) -obj-$(CONFIG_BITFIELD_KUNIT) += bitfield_kunit.o -obj-$(CONFIG_CHECKSUM_KUNIT) += checksum_kunit.o -obj-$(CONFIG_LIST_KUNIT_TEST) += list-test.o -obj-$(CONFIG_HASHTABLE_KUNIT_TEST) += hashtable_test.o -obj-$(CONFIG_LINEAR_RANGES_TEST) += test_linear_ranges.o -obj-$(CONFIG_BITS_TEST) += test_bits.o -obj-$(CONFIG_CMDLINE_KUNIT_TEST) += cmdline_kunit.o -obj-$(CONFIG_SLUB_KUNIT_TEST) += slub_kunit.o -obj-$(CONFIG_MEMCPY_KUNIT_TEST) += memcpy_kunit.o -obj-$(CONFIG_IS_SIGNED_TYPE_KUNIT_TEST) += is_signed_type_kunit.o -CFLAGS_overflow_kunit.o = $(call cc-disable-warning, tautological-constant-out-of-range-compare) -obj-$(CONFIG_OVERFLOW_KUNIT_TEST) += overflow_kunit.o -CFLAGS_stackinit_kunit.o += $(call cc-disable-warning, switch-unreachable) -obj-$(CONFIG_STACKINIT_KUNIT_TEST) += stackinit_kunit.o -CFLAGS_fortify_kunit.o += $(call cc-disable-warning, unsequenced) -CFLAGS_fortify_kunit.o += $(call cc-disable-warning, stringop-overread) -CFLAGS_fortify_kunit.o += $(call cc-disable-warning, stringop-truncation) -CFLAGS_fortify_kunit.o += $(DISABLE_STRUCTLEAK_PLUGIN) -obj-$(CONFIG_FORTIFY_KUNIT_TEST) += fortify_kunit.o -obj-$(CONFIG_SIPHASH_KUNIT_TEST) += siphash_kunit.o - obj-$(CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED) += devmem_is_allowed.o obj-$(CONFIG_FIRMWARE_TABLE) += fw_table.o diff --git a/lib/tests/Makefile b/lib/tests/Makefile new file mode 100644 index 000000000000..c6a14cc8663e --- /dev/null +++ b/lib/tests/Makefile @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for tests of kernel library functions. + +# KUnit tests +CFLAGS_bitfield_kunit.o := $(DISABLE_STRUCTLEAK_PLUGIN) +obj-$(CONFIG_BITFIELD_KUNIT) += bitfield_kunit.o +obj-$(CONFIG_BITS_TEST) += test_bits.o +obj-$(CONFIG_CHECKSUM_KUNIT) += checksum_kunit.o +obj-$(CONFIG_CMDLINE_KUNIT_TEST) += cmdline_kunit.o +obj-$(CONFIG_CPUMASK_KUNIT_TEST) += cpumask_kunit.o +CFLAGS_fortify_kunit.o += $(call cc-disable-warning, unsequenced) +CFLAGS_fortify_kunit.o += $(call cc-disable-warning, stringop-overread) +CFLAGS_fortify_kunit.o += $(call cc-disable-warning, stringop-truncation) +CFLAGS_fortify_kunit.o += $(DISABLE_STRUCTLEAK_PLUGIN) +obj-$(CONFIG_FORTIFY_KUNIT_TEST) += fortify_kunit.o +CFLAGS_test_fprobe.o += $(CC_FLAGS_FTRACE) +obj-$(CONFIG_FPROBE_SANITY_TEST) += test_fprobe.o +obj-$(CONFIG_HASHTABLE_KUNIT_TEST) += hashtable_test.o +obj-$(CONFIG_HASH_KUNIT_TEST) += test_hash.o +obj-$(CONFIG_TEST_IOV_ITER) += kunit_iov_iter.o +obj-$(CONFIG_IS_SIGNED_TYPE_KUNIT_TEST) += is_signed_type_kunit.o +obj-$(CONFIG_KPROBES_SANITY_TEST) += test_kprobes.o +obj-$(CONFIG_LIST_KUNIT_TEST) += list-test.o +obj-$(CONFIG_TEST_LIST_SORT) += test_list_sort.o +obj-$(CONFIG_LINEAR_RANGES_TEST) += test_linear_ranges.o +obj-$(CONFIG_MEMCPY_KUNIT_TEST) += memcpy_kunit.o +CFLAGS_overflow_kunit.o = $(call cc-disable-warning, tautological-constant-out-of-range-compare) +obj-$(CONFIG_OVERFLOW_KUNIT_TEST) += overflow_kunit.o +obj-$(CONFIG_SIPHASH_KUNIT_TEST) += siphash_kunit.o +obj-$(CONFIG_SLUB_KUNIT_TEST) += slub_kunit.o +obj-$(CONFIG_TEST_SORT) += test_sort.o +CFLAGS_stackinit_kunit.o += $(call cc-disable-warning, switch-unreachable) +obj-$(CONFIG_STACKINIT_KUNIT_TEST) += stackinit_kunit.o +obj-$(CONFIG_STRING_KUNIT_TEST) += string_kunit.o +obj-$(CONFIG_STRING_HELPERS_KUNIT_TEST) += string_helpers_kunit.o + diff --git a/lib/bitfield_kunit.c b/lib/tests/bitfield_kunit.c similarity index 100% rename from lib/bitfield_kunit.c rename to lib/tests/bitfield_kunit.c diff --git a/lib/checksum_kunit.c b/lib/tests/checksum_kunit.c similarity index 100% rename from lib/checksum_kunit.c rename to lib/tests/checksum_kunit.c diff --git a/lib/cmdline_kunit.c b/lib/tests/cmdline_kunit.c similarity index 100% rename from lib/cmdline_kunit.c rename to lib/tests/cmdline_kunit.c diff --git a/lib/cpumask_kunit.c b/lib/tests/cpumask_kunit.c similarity index 100% rename from lib/cpumask_kunit.c rename to lib/tests/cpumask_kunit.c diff --git a/lib/fortify_kunit.c b/lib/tests/fortify_kunit.c similarity index 100% rename from lib/fortify_kunit.c rename to lib/tests/fortify_kunit.c diff --git a/lib/hashtable_test.c b/lib/tests/hashtable_test.c similarity index 100% rename from lib/hashtable_test.c rename to lib/tests/hashtable_test.c diff --git a/lib/is_signed_type_kunit.c b/lib/tests/is_signed_type_kunit.c similarity index 100% rename from lib/is_signed_type_kunit.c rename to lib/tests/is_signed_type_kunit.c diff --git a/lib/kunit_iov_iter.c b/lib/tests/kunit_iov_iter.c similarity index 100% rename from lib/kunit_iov_iter.c rename to lib/tests/kunit_iov_iter.c diff --git a/lib/list-test.c b/lib/tests/list-test.c similarity index 100% rename from lib/list-test.c rename to lib/tests/list-test.c diff --git a/lib/memcpy_kunit.c b/lib/tests/memcpy_kunit.c similarity index 100% rename from lib/memcpy_kunit.c rename to lib/tests/memcpy_kunit.c diff --git a/lib/overflow_kunit.c b/lib/tests/overflow_kunit.c similarity index 100% rename from lib/overflow_kunit.c rename to lib/tests/overflow_kunit.c diff --git a/lib/siphash_kunit.c b/lib/tests/siphash_kunit.c similarity index 100% rename from lib/siphash_kunit.c rename to lib/tests/siphash_kunit.c diff --git a/lib/slub_kunit.c b/lib/tests/slub_kunit.c similarity index 100% rename from lib/slub_kunit.c rename to lib/tests/slub_kunit.c diff --git a/lib/stackinit_kunit.c b/lib/tests/stackinit_kunit.c similarity index 100% rename from lib/stackinit_kunit.c rename to lib/tests/stackinit_kunit.c diff --git a/lib/string_helpers_kunit.c b/lib/tests/string_helpers_kunit.c similarity index 100% rename from lib/string_helpers_kunit.c rename to lib/tests/string_helpers_kunit.c diff --git a/lib/string_kunit.c b/lib/tests/string_kunit.c similarity index 100% rename from lib/string_kunit.c rename to lib/tests/string_kunit.c diff --git a/lib/test_bits.c b/lib/tests/test_bits.c similarity index 100% rename from lib/test_bits.c rename to lib/tests/test_bits.c diff --git a/lib/test_fprobe.c b/lib/tests/test_fprobe.c similarity index 100% rename from lib/test_fprobe.c rename to lib/tests/test_fprobe.c diff --git a/lib/test_hash.c b/lib/tests/test_hash.c similarity index 100% rename from lib/test_hash.c rename to lib/tests/test_hash.c diff --git a/lib/test_kprobes.c b/lib/tests/test_kprobes.c similarity index 100% rename from lib/test_kprobes.c rename to lib/tests/test_kprobes.c diff --git a/lib/test_linear_ranges.c b/lib/tests/test_linear_ranges.c similarity index 100% rename from lib/test_linear_ranges.c rename to lib/tests/test_linear_ranges.c diff --git a/lib/test_list_sort.c b/lib/tests/test_list_sort.c similarity index 100% rename from lib/test_list_sort.c rename to lib/tests/test_list_sort.c diff --git a/lib/test_sort.c b/lib/tests/test_sort.c similarity index 100% rename from lib/test_sort.c rename to lib/tests/test_sort.c -- 2.34.1

1 week

5
6
0 0

[PATCH bpf-next v2 0/6] selftests/bpf: Various sockmap-related fixes

by Michal Luczaj

Series takes care of few bugs and missing features with the aim to improve the test coverage of sockmap/sockhash. Last patch is a create_pair() rewrite making use of __attribute__((cleanup)) to handle socket fd lifetime. Signed-off-by: Michal Luczaj <mhal(a)rbox.co> --- Changes in v2: - Rebase on bpf-next (Jakub) - Use cleanup helpers from kernel's cleanup.h (Jakub) - Fix subject of patch 3, rephrase patch 4, use correct prefix - Link to v1: https://lore.kernel.org/r/20240724-sockmap-selftest-fixes-v1-0-46165d224712… Changes in v1: - No declarations in function body (Jakub) - Don't touch output arguments until function succeeds (Jakub) - Link to v0: https://lore.kernel.org/netdev/027fdb41-ee11-4be0-a493-22f28a1abd7c@rbox.co/ --- Michal Luczaj (6): selftests/bpf: Support more socket types in create_pair() selftests/bpf: Socket pair creation, cleanups selftests/bpf: Simplify inet_socketpair() and vsock_socketpair_connectible() selftests/bpf: Honour the sotype of af_unix redir tests selftests/bpf: Exercise SOCK_STREAM unix_inet_redir_to_connected() selftests/bpf: Introduce __attribute__((cleanup)) in create_pair() .../selftests/bpf/prog_tests/sockmap_basic.c | 28 ++-- .../selftests/bpf/prog_tests/sockmap_helpers.h | 149 ++++++++++++++------- .../selftests/bpf/prog_tests/sockmap_listen.c | 117 ++-------------- 3 files changed, 124 insertions(+), 170 deletions(-) --- base-commit: 92cc2456e9775dc4333fb4aa430763ae4ac2f2d9 change-id: 20240729-selftest-sockmap-fixes-bcca996e143b Best regards, -- Michal Luczaj <mhal(a)rbox.co>

1 week, 1 day

3
25
0 0

[PATCH v8 0/8] clk: Add kunit tests for fixed rate and parent data

by Stephen Boyd

This patch series adds unit tests for the clk fixed rate basic type and the clk registration functions that use struct clk_parent_data. To get there, we add support for loading device tree overlays onto the live DTB along with probing platform drivers to bind to device nodes in the overlays. With this series, we're able to exercise some of the code in the common clk framework that uses devicetree lookups to find parents and the fixed rate clk code that scans device tree directly and creates clks. Please review. I Cced everyone to all the patches so they get the full context. I'm hoping I can take the whole pile through the clk tree as they all build upon each other. Or the DT part can be merged through the DT tree to reduce the dependencies. Changes from v7: https://lore.kernel.org/r/20240710201246.1802189-1-sboyd@kernel.org * Support modular builds properly by compiling overlay with tests into one .ko * Fold in thinko fix from Geert to DT overlay application patch * Export device_is_bound() to fix module build * Add more module license and description Changes from v6: https://lore.kernel.org/r/20240706045454.215701-1-sboyd@kernel.org * Fix kasan error in platform test by fixing the condition to check for correct free callback * Add module descriptions to new modules Changes from v5: https://lore.kernel.org/r/20240603223811.3815762-1-sboyd@kernel.org * Pick up reviewed-by tags * Drop test vendor prefix bindings as dtschema allows anything now * Use of_node_put_kunit() more to plug some reference leaks * Select DTC config to avoid compile fails because of missing dtc * Don't skip for OF_OVERLAY in overlay tests because they depend on it Changes from v4: https://lore.kernel.org/r/20240422232404.213174-1-sboyd@kernel.org * Picked up reviewed-by tags * Check for non-NULL device pointers before calling put_device() * Fix CFI issues with kunit actions * Introduce platform_device_prepare_wait_for_probe() helper to wait for a platform device to probe * Move platform code to lib/kunit and rename functions to have kunit prefix * Fix issue with platform wrappers messing up reference counting because they used kunit actions * New patch to populate overlay devices on root node for powerpc * Make fixed-rate binding generic single clk consumer binding Changes from v3: https://lore.kernel.org/r/20230327222159.3509818-1-sboyd@kernel.org * No longer depend on Frank's series[1] because it was merged upstream[2] * Use kunit_add_action_or_reset() to shorten code * Skip tests properly when CONFIG_OF_OVERLAY isn't set Changes from v2: https://lore.kernel.org/r/20230315183729.2376178-1-sboyd@kernel.org * Overlays don't depend on __symbols__ node * Depend on Frank's always create root node if CONFIG_OF series[1] * Added kernel-doc to KUnit API doc * Fixed some kernel-doc on functions * More test cases for fixed rate clk Changes from v1: https://lore.kernel.org/r/20230302013822.1808711-1-sboyd@kernel.org * Don't depend on UML, use unittest data approach to attach nodes * Introduce overlay loading API for KUnit * Move platform_device KUnit code to drivers/base/test * Use #define macros for constants shared between unit tests and overlays * Settle on "test" as a vendor prefix * Make KUnit wrappers have "_kunit" postfix [1] https://lore.kernel.org/r/20230317053415.2254616-1-frowand.list@gmail.com [2] https://lore.kernel.org/r/20240308195737.GA1174908-robh@kernel.org Stephen Boyd (8): of/platform: Allow overlays to create platform devices from the root node of: Add test managed wrappers for of_overlay_apply()/of_node_put() dt-bindings: vendor-prefixes: Add "test" vendor for KUnit and friends of: Add a KUnit test for overlays and test managed APIs platform: Add test managed platform_device/driver APIs clk: Add test managed clk provider/consumer APIs clk: Add KUnit tests for clk fixed rate basic type clk: Add KUnit tests for clks registered with struct clk_parent_data Documentation/dev-tools/kunit/api/clk.rst | 10 + Documentation/dev-tools/kunit/api/index.rst | 21 + Documentation/dev-tools/kunit/api/of.rst | 13 + .../dev-tools/kunit/api/platformdevice.rst | 10 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + drivers/base/dd.c | 1 + drivers/clk/.kunitconfig | 2 + drivers/clk/Kconfig | 11 + drivers/clk/Makefile | 11 +- drivers/clk/clk-fixed-rate_test.c | 380 +++++++++++++++ drivers/clk/clk-fixed-rate_test.h | 8 + drivers/clk/clk_kunit_helpers.c | 207 ++++++++ drivers/clk/clk_parent_data_test.h | 10 + drivers/clk/clk_test.c | 453 +++++++++++++++++- drivers/clk/kunit_clk_fixed_rate_test.dtso | 19 + drivers/clk/kunit_clk_parent_data_test.dtso | 28 ++ drivers/of/.kunitconfig | 1 + drivers/of/Kconfig | 10 + drivers/of/Makefile | 3 + drivers/of/kunit_overlay_test.dtso | 9 + drivers/of/of_kunit_helpers.c | 77 +++ drivers/of/overlay_test.c | 115 +++++ drivers/of/platform.c | 9 +- include/kunit/clk.h | 28 ++ include/kunit/of.h | 115 +++++ include/kunit/platform_device.h | 20 + lib/kunit/Makefile | 4 +- lib/kunit/platform-test.c | 224 +++++++++ lib/kunit/platform.c | 302 ++++++++++++ 29 files changed, 2097 insertions(+), 6 deletions(-) create mode 100644 Documentation/dev-tools/kunit/api/clk.rst create mode 100644 Documentation/dev-tools/kunit/api/of.rst create mode 100644 Documentation/dev-tools/kunit/api/platformdevice.rst create mode 100644 drivers/clk/clk-fixed-rate_test.c create mode 100644 drivers/clk/clk-fixed-rate_test.h create mode 100644 drivers/clk/clk_kunit_helpers.c create mode 100644 drivers/clk/clk_parent_data_test.h create mode 100644 drivers/clk/kunit_clk_fixed_rate_test.dtso create mode 100644 drivers/clk/kunit_clk_parent_data_test.dtso create mode 100644 drivers/of/kunit_overlay_test.dtso create mode 100644 drivers/of/of_kunit_helpers.c create mode 100644 drivers/of/overlay_test.c create mode 100644 include/kunit/clk.h create mode 100644 include/kunit/of.h create mode 100644 include/kunit/platform_device.h create mode 100644 lib/kunit/platform-test.c create mode 100644 lib/kunit/platform.c base-commit: 1613e604df0cd359cf2a7fbd9be7a0bcfacfabd0 -- https://git.kernel.org/pub/scm/linux/kernel/git/clk/linux.git/ https://git.kernel.org/pub/scm/linux/kernel/git/sboyd/spmi.git

1 week, 2 days

3
33
0 0

[PATCH v2 00/25] Enable FRED with KVM VMX

by Xin Li

This patch set enables the Intel flexible return and event delivery (FRED) architecture with KVM VMX to allow guests to utilize FRED. The FRED architecture defines simple new transitions that change privilege level (ring transitions). The FRED architecture was designed with the following goals: 1) Improve overall performance and response time by replacing event delivery through the interrupt descriptor table (IDT event delivery) and event return by the IRET instruction with lower latency transitions. 2) Improve software robustness by ensuring that event delivery establishes the full supervisor context and that event return establishes the full user context. The new transitions defined by the FRED architecture are FRED event delivery and, for returning from events, two FRED return instructions. FRED event delivery can effect a transition from ring 3 to ring 0, but it is used also to deliver events incident to ring 0. One FRED instruction (ERETU) effects a return from ring 0 to ring 3, while the other (ERETS) returns while remaining in ring 0. Collectively, FRED event delivery and the FRED return instructions are FRED transitions. Intel VMX architecture is extended to run FRED guests, and the major changes are: 1) New VMCS fields for FRED context management, which includes two new event data VMCS fields, eight new guest FRED context VMCS fields and eight new host FRED context VMCS fields. 2) VMX nested-exception support for proper virtualization of stack levels introduced with FRED architecture. Search for the latest FRED spec in most search engines with this search pattern: site:intel.com FRED (flexible return and event delivery) specification As the native FRED patches are committed in the tip tree "x86/fred" branch: https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/log/?h=x86/fred, and we have received a good amount of review comments for v1, it's time to send out v2 based on this branch for further help from the community. Patch 1-2 are cleanups to VMX basic and misc MSRs, which were sent out earlier as a preparation for FRED changes: https://lore.kernel.org/kvm/20240206182032.1596-1-xin3.li@intel.com/T/#u Patch 3-15 add FRED support to VMX. Patch 16-21 add FRED support to nested VMX. Patch 22 exposes FRED and its baseline features to KVM guests. Patch 23-25 add FRED selftests. There is also a counterpart qemu patch set for FRED at: https://lore.kernel.org/qemu-devel/20231109072012.8078-1-xin3.li@intel.com/…, which works with this patch set to allow KVM to run FRED guests. Changes since v1: * Always load the secondary VM exit controls (Sean Christopherson). * Remove FRED VM entry/exit controls consistency checks in setup_vmcs_config() (Sean Christopherson). * Clear FRED VM entry/exit controls if FRED is not enumerated (Chao Gao). * Use guest_can_use() to trace FRED enumeration in a vcpu (Chao Gao). * Enable FRED MSRs intercept if FRED is no longer enumerated in CPUID (Chao Gao). * Move guest FRED states init into __vmx_vcpu_reset() (Chao Gao). * Don't use guest_cpuid_has() in vmx_prepare_switch_to_{host,guest}(), which are called from IRQ-disabled context (Chao Gao). * Reset msr_guest_fred_rsp0 in __vmx_vcpu_reset() (Chao Gao). * Fail host requested FRED MSRs access if KVM cannot virtualize FRED (Chao Gao). * Handle the case FRED MSRs are valid but KVM cannot virtualize FRED (Chao Gao). * Add sanity checks when writing to FRED MSRs. * Explain why it is ok to only check CR4.FRED in kvm_is_fred_enabled() (Chao Gao). * Document event data should be equal to CR2/DR6/IA32_XFD_ERR instead of using WARN_ON() (Chao Gao). * Zero event data if a #NM was not caused by extended feature disable (Chao Gao). * Set the nested flag when there is an original interrupt (Chao Gao). * Dump guest FRED states only if guest has FRED enabled (Nikolay Borisov). * Add a prerequisite to SHADOW_FIELD_R[OW] macros * Remove hyperv TLFS related changes (Jeremi Piotrowski). * Use kvm_cpu_cap_has() instead of cpu_feature_enabled() to decouple KVM's capability to virtualize a feature and host's enabling of a feature (Chao Gao). Xin Li (25): KVM: VMX: Cleanup VMX basic information defines and usages KVM: VMX: Cleanup VMX misc information defines and usages KVM: VMX: Add support for the secondary VM exit controls KVM: x86: Mark CR4.FRED as not reserved KVM: VMX: Initialize FRED VM entry/exit controls in vmcs_config KVM: VMX: Defer enabling FRED MSRs save/load until after set CPUID KVM: VMX: Set intercept for FRED MSRs KVM: VMX: Initialize VMCS FRED fields KVM: VMX: Switch FRED RSP0 between host and guest KVM: VMX: Add support for FRED context save/restore KVM: x86: Add kvm_is_fred_enabled() KVM: VMX: Handle FRED event data KVM: VMX: Handle VMX nested exception for FRED KVM: VMX: Disable FRED if FRED consistency checks fail KVM: VMX: Dump FRED context in dump_vmcs() KVM: VMX: Invoke vmx_set_cpu_caps() before nested setup KVM: nVMX: Add support for the secondary VM exit controls KVM: nVMX: Add a prerequisite to SHADOW_FIELD_R[OW] macros KVM: nVMX: Add FRED VMCS fields KVM: nVMX: Add support for VMX FRED controls KVM: nVMX: Add VMCS FRED states checking KVM: x86: Allow FRED/LKGS/WRMSRNS to be exposed to guests KVM: selftests: Run debug_regs test with FRED enabled KVM: selftests: Add a new VM guest mode to run user level code KVM: selftests: Add fred exception tests Documentation/virt/kvm/x86/nested-vmx.rst | 19 + arch/x86/include/asm/kvm_host.h | 8 +- arch/x86/include/asm/msr-index.h | 15 +- arch/x86/include/asm/vmx.h | 59 ++- arch/x86/kvm/cpuid.c | 4 +- arch/x86/kvm/governed_features.h | 1 + arch/x86/kvm/kvm_cache_regs.h | 17 + arch/x86/kvm/svm/svm.c | 4 +- arch/x86/kvm/vmx/capabilities.h | 30 +- arch/x86/kvm/vmx/nested.c | 329 ++++++++++++--- arch/x86/kvm/vmx/nested.h | 2 +- arch/x86/kvm/vmx/vmcs.h | 1 + arch/x86/kvm/vmx/vmcs12.c | 19 + arch/x86/kvm/vmx/vmcs12.h | 38 ++ arch/x86/kvm/vmx/vmcs_shadow_fields.h | 80 ++-- arch/x86/kvm/vmx/vmx.c | 385 +++++++++++++++--- arch/x86/kvm/vmx/vmx.h | 15 +- arch/x86/kvm/x86.c | 103 ++++- arch/x86/kvm/x86.h | 5 +- tools/testing/selftests/kvm/Makefile | 1 + .../selftests/kvm/include/kvm_util_base.h | 1 + .../selftests/kvm/include/x86_64/processor.h | 36 ++ tools/testing/selftests/kvm/lib/kvm_util.c | 5 +- .../selftests/kvm/lib/x86_64/processor.c | 15 +- tools/testing/selftests/kvm/lib/x86_64/vmx.c | 4 +- .../testing/selftests/kvm/x86_64/debug_regs.c | 50 ++- .../testing/selftests/kvm/x86_64/fred_test.c | 297 ++++++++++++++ 27 files changed, 1320 insertions(+), 223 deletions(-) create mode 100644 tools/testing/selftests/kvm/x86_64/fred_test.c base-commit: e13841907b8fda0ae0ce1ec03684665f578416a8 -- 2.43.0

2 weeks, 4 days

8
93
0 0

[PATCH v4] memfd: `MFD_NOEXEC_SEAL` should not imply `MFD_ALLOW_SEALING`

by Barnabás Pőcze

`MFD_NOEXEC_SEAL` should remove the executable bits and set `F_SEAL_EXEC` to prevent further modifications to the executable bits as per the comment in the uapi header file: not executable and sealed to prevent changing to executable However, commit 105ff5339f498a ("mm/memfd: add MFD_NOEXEC_SEAL and MFD_EXEC") that introduced this feature made it so that `MFD_NOEXEC_SEAL` unsets `F_SEAL_SEAL`, essentially acting as a superset of `MFD_ALLOW_SEALING`. Nothing implies that it should be so, and indeed up until the second version of the of the patchset[0] that introduced `MFD_EXEC` and `MFD_NOEXEC_SEAL`, `F_SEAL_SEAL` was not removed, however, it was changed in the third revision of the patchset[1] without a clear explanation. This behaviour is surprising for application developers, there is no documentation that would reveal that `MFD_NOEXEC_SEAL` has the additional effect of `MFD_ALLOW_SEALING`. Additionally, combined with `vm.memfd_noexec=2` it has the effect of making all memfds initially sealable. So do not remove `F_SEAL_SEAL` when `MFD_NOEXEC_SEAL` is requested, thereby returning to the pre-Linux 6.3 behaviour of only allowing sealing when `MFD_ALLOW_SEALING` is specified. Now, this is technically a uapi break. However, the damage is expected to be minimal. To trigger user visible change, a program has to do the following steps: - create memfd: - with `MFD_NOEXEC_SEAL`, - without `MFD_ALLOW_SEALING`; - try to add seals / check the seals. But that seems unlikely to happen intentionally since this change essentially reverts the kernel's behaviour to that of Linux <6.3, so if a program worked correctly on those older kernels, it will likely work correctly after this change. I have used Debian Code Search and GitHub to try to find potential breakages, and I could only find a single one. dbus-broker's memfd_create() wrapper is aware of this implicit `MFD_ALLOW_SEALING` behaviour, and tries to work around it[2]. This workaround will break. Luckily, this only affects the test suite, it does not affect the normal operations of dbus-broker. There is a PR with a fix[3]. I also carried out a smoke test by building a kernel with this change and booting an Arch Linux system into GNOME and Plasma sessions. There was also a previous attempt to address this peculiarity by introducing a new flag[4]. [0]: https://lore.kernel.org/lkml/20220805222126.142525-3-jeffxu@google.com/ [1]: https://lore.kernel.org/lkml/20221202013404.163143-3-jeffxu@google.com/ [2]: https://github.com/bus1/dbus-broker/blob/9eb0b7e5826fc76cad7b025bc46f267d4a… [3]: https://github.com/bus1/dbus-broker/pull/366 [4]: https://lore.kernel.org/lkml/20230714114753.170814-1-david@readahead.eu/ Cc: stable(a)vger.kernel.org Signed-off-by: Barnabás Pőcze <pobrn(a)protonmail.com> --- * v3: https://lore.kernel.org/linux-mm/20240611231409.3899809-1-jeffxu@chromium.o… * v2: https://lore.kernel.org/linux-mm/20240524033933.135049-1-jeffxu@google.com/ * v1: https://lore.kernel.org/linux-mm/20240513191544.94754-1-pobrn@protonmail.co… This fourth version returns to removing the inconsistency as opposed to documenting its existence, with the same code change as v1 but with a somewhat extended commit message. This is sent because I believe it is worth at least a try; it can be easily reverted if bigger application breakages are discovered than initially imagined. --- mm/memfd.c | 9 ++++----- tools/testing/selftests/memfd/memfd_test.c | 2 +- 2 files changed, 5 insertions(+), 6 deletions(-) diff --git a/mm/memfd.c b/mm/memfd.c index 7d8d3ab3fa37..8b7f6afee21d 100644 --- a/mm/memfd.c +++ b/mm/memfd.c @@ -356,12 +356,11 @@ SYSCALL_DEFINE2(memfd_create, inode->i_mode &= ~0111; file_seals = memfd_file_seals_ptr(file); - if (file_seals) { - *file_seals &= ~F_SEAL_SEAL; + if (file_seals) *file_seals |= F_SEAL_EXEC; - } - } else if (flags & MFD_ALLOW_SEALING) { - /* MFD_EXEC and MFD_ALLOW_SEALING are set */ + } + + if (flags & MFD_ALLOW_SEALING) { file_seals = memfd_file_seals_ptr(file); if (file_seals) *file_seals &= ~F_SEAL_SEAL; diff --git a/tools/testing/selftests/memfd/memfd_test.c b/tools/testing/selftests/memfd/memfd_test.c index 95af2d78fd31..7b78329f65b6 100644 --- a/tools/testing/selftests/memfd/memfd_test.c +++ b/tools/testing/selftests/memfd/memfd_test.c @@ -1151,7 +1151,7 @@ static void test_noexec_seal(void) mfd_def_size, MFD_CLOEXEC | MFD_NOEXEC_SEAL); mfd_assert_mode(fd, 0666); - mfd_assert_has_seals(fd, F_SEAL_EXEC); + mfd_assert_has_seals(fd, F_SEAL_SEAL | F_SEAL_EXEC); mfd_fail_chmod(fd, 0777); close(fd); } -- 2.45.2

3 weeks

3
3
0 0

[RFC PATCH v1 0/4] Add support for the Bus Lock Threshold

by Manali Shukla

Malicious guests can cause bus locks to degrade the performance of a system. Non-WB (write-back) and misaligned locked RMW (read-modify-write) instructions are referred to as "bus locks" and require system wide synchronization among all processors to guarantee the atomicity. The bus locks can impose notable performance penalties for all processors within the system. Support for the Bus Lock Threshold is indicated by CPUID Fn8000_000A_EDX[29] BusLockThreshold=1, the VMCB provides a Bus Lock Threshold enable bit and an unsigned 16-bit Bus Lock Threshold count. VMCB intercept bit VMCB Offset Bits Function 14h 5 Intercept bus lock operations Bus lock threshold count VMCB Offset Bits Function 120h 15:0 Bus lock counter During VMRUN, the bus lock threshold count is fetched and stored in an internal count register. Prior to executing a bus lock within the guest, the processor verifies the count in the bus lock register. If the count is greater than zero, the processor executes the bus lock, reducing the count. However, if the count is zero, the bus lock operation is not performed, and instead, a Bus Lock Threshold #VMEXIT is triggered to transfer control to the Virtual Machine Monitor (VMM). A Bus Lock Threshold #VMEXIT is reported to the VMM with VMEXIT code 0xA5h, VMEXIT_BUSLOCK. EXITINFO1 and EXITINFO2 are set to 0 on a VMEXIT_BUSLOCK. On a #VMEXIT, the processor writes the current value of the Bus Lock Threshold Counter to the VMCB. More details about the Bus Lock Threshold feature can be found in AMD APM [1]. Patches are prepared on kvm-x86/svm (704ec48fc2fb) Testing done: - Added a selftest for the Bus Lock Threadshold functionality. - Tested the Bus Lock Threshold functionality on SEV and SEV-ES guests. - Tested the Bus Lock Threshold functionality on nested guests. Qemu changes can be found on: Repo: https://github.com/AMDESE/qemu.git Branch: buslock_threshold Qemu commandline to use the bus lock threshold functionality: qemu-system-x86_64 -enable-kvm -cpu EPYC-Turin,+svm -M q35,bus-lock-ratelimit=10 \ .. [1]: AMD64 Architecture Programmer's Manual Pub. 24593, April 2024, Vol 2, 15.14.5 Bus Lock Threshold. https://bugzilla.kernel.org/attachment.cgi?id=306250 Manali Shukla (2): x86/cpufeatures: Add CPUID feature bit for the Bus Lock Threshold KVM: x86: nSVM: Implement support for nested Bus Lock Threshold Nikunj A Dadhania (2): KVM: SVM: Enable Bus lock threshold exit KVM: selftests: Add bus lock exit test arch/x86/include/asm/cpufeatures.h | 1 + arch/x86/include/asm/svm.h | 5 +- arch/x86/include/uapi/asm/svm.h | 2 + arch/x86/kvm/governed_features.h | 1 + arch/x86/kvm/svm/nested.c | 25 ++++ arch/x86/kvm/svm/svm.c | 48 ++++++++ arch/x86/kvm/svm/svm.h | 1 + arch/x86/kvm/x86.h | 1 + tools/testing/selftests/kvm/Makefile | 1 + .../selftests/kvm/x86_64/svm_buslock_test.c | 114 ++++++++++++++++++ 10 files changed, 198 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/kvm/x86_64/svm_buslock_test.c base-commit: 704ec48fc2fbd4e41ec982662ad5bf1eee33eeb2 -- 2.34.1

4 weeks

3
25
0 0

[PATCH v4 0/2] selftests/resctrl: SNC kernel support discovery

by Maciej Wieczor-Retman

Changes v4: - Printing SNC warnings at the start of every test. - Printing SNC warnings at the end of every relevant test. - Remove global snc_mode variable, consolidate snc detection functions into one. - Correct minor mistakes. Changes v3: - Reworked patch 2. - Changed minor things in patch 1 like function name and made corrections to the patch message. Changes v2: - Removed patches 2 and 3 since now this part will be supported by the kernel. Sub-Numa Clustering (SNC) allows splitting CPU cores, caches and memory into multiple NUMA nodes. When enabled, NUMA-aware applications can achieve better performance on bigger server platforms. SNC support in the kernel was merged into x86/cache [1]. With SNC enabled and kernel support in place all the tests will function normally (aside from effective cache size). There might be a problem when SNC is enabled but the system is still using an older kernel version without SNC support. Currently the only message displayed in that situation is a guess that SNC might be enabled and is causing issues. That message also is displayed whenever the test fails on an Intel platform. Add a mechanism to discover kernel support for SNC which will add more meaning and certainty to the error message. Add runtime SNC mode detection and verify how reliable that information is. Series was tested on Ice Lake server platforms with SNC disabled, SNC-2 and SNC-4. The tests were also ran with and without kernel support for SNC. Series applies cleanly on kselftest/next. [1] https://lore.kernel.org/all/20240628215619.76401-1-tony.luck@intel.com/ Previous versions of this series: [v1] https://lore.kernel.org/all/cover.1709721159.git.maciej.wieczor-retman@inte… [v2] https://lore.kernel.org/all/cover.1715769576.git.maciej.wieczor-retman@inte… [v3] https://lore.kernel.org/all/cover.1719842207.git.maciej.wieczor-retman@inte… Maciej Wieczor-Retman (2): selftests/resctrl: Adjust effective L3 cache size with SNC enabled selftests/resctrl: Adjust SNC support messages tools/testing/selftests/resctrl/cat_test.c | 8 ++ tools/testing/selftests/resctrl/cmt_test.c | 10 +- tools/testing/selftests/resctrl/mba_test.c | 7 + tools/testing/selftests/resctrl/mbm_test.c | 9 +- tools/testing/selftests/resctrl/resctrl.h | 7 + .../testing/selftests/resctrl/resctrl_tests.c | 8 +- tools/testing/selftests/resctrl/resctrlfs.c | 130 ++++++++++++++++++ 7 files changed, 174 insertions(+), 5 deletions(-) -- 2.45.2

4 weeks, 1 day

2
8
0 0

[PATCH] kunit: tool: Build compile_commands.json

by Brendan Jackman

compile_commands.json is used by clangd[1] to provide code navigation and completion functionality to editors. See [2] for an example configuration that includes this functionality for VSCode. It can currently be built manually when using kunit.py, by running: ./scripts/clang-tools/gen_compile_commands.py -d .kunit With this change however, it's built automatically so you don't need to manually keep it up to date. Unlike the manual approach, having make build the compile_commands.json means that it appears in the build output tree instead of at the root of the source tree, so you'll need to add --compile-commands-dir= to your clangd args for it to be found. [1] https://clangd.llvm.org/ [2] https://github.com/FlorentRevest/linux-kernel-vscode Signed-off-by: Brendan Jackman <jackmanb(a)google.com> --- tools/testing/kunit/kunit_kernel.py | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/tools/testing/kunit/kunit_kernel.py b/tools/testing/kunit/kunit_kernel.py index 7254c110ff23..61931c4926fd 100644 --- a/tools/testing/kunit/kunit_kernel.py +++ b/tools/testing/kunit/kunit_kernel.py @@ -72,7 +72,8 @@ class LinuxSourceTreeOperations: raise ConfigError(e.output.decode()) def make(self, jobs: int, build_dir: str, make_options: Optional[List[str]]) -> None: - command = ['make', 'ARCH=' + self._linux_arch, 'O=' + build_dir, '--jobs=' + str(jobs)] + command = ['make', 'all', 'compile_commands.json', 'ARCH=' + self._linux_arch, + 'O=' + build_dir, '--jobs=' + str(jobs)] if make_options: command.extend(make_options) if self._cross_compile: --- base-commit: 3c999d1ae3c75991902a1a7dad0cb62c2a3008b4 change-id: 20240516-kunit-compile-commands-d994074fc2be Best regards, -- Brendan Jackman <jackmanb(a)google.com>

1 month

3
2
0 0

[PATCH v3 0/7] iommufd support pasid attach/replace

by Yi Liu

PASID (Process Address Space ID) is a PCIe extension to tag the DMA transactions out of a physical device, and most modern IOMMU hardware have supported PASID granular address translation. So a PASID-capable device can be attached to multiple hwpts (a.k.a. domains), each attachment is tagged with a pasid. This series is based on a preparation series [1], it first adds a missing iommu API to replace domain for a pasid. Based on the iommu pasid attach/ replace/detach APIs, this series adds iommufd APIs for device drivers to attach/replace/detach pasid to/from hwpt per userspace's request, and adds selftest to validate the iommufd APIs. The completed code can be found in below link [2]. Heads up! The existing iommufd selftest was broken, there was a fix [3] to it, but not been upstreamed yet. If want to run the iommufd selftest, please apply that fix. Sorry for the inconvenience. [1] https://lore.kernel.org/linux-iommu/20240628085538.47049-1-yi.l.liu@intel.c… [2] https://github.com/yiliu1765/iommufd/tree/iommufd_pasid [3] https://lore.kernel.org/linux-iommu/20240111073213.180020-1-baolu.lu@linux.… Change log: v3: - Split the set_dev_pasid op enhancements for domain replacement to be a separate series "Make set_dev_pasid op supportting domain replacement" [1]. The below changes are made in the separate series. *) set_dev_pasid() callback should keep the old config if failed to attach to a domain. This simplifies the caller a lot as caller does not need to attach it back to old domain explicitly. This also avoids some corner cases in which the core may do duplicated domain attachment as described in below link (Jason) https://lore.kernel.org/linux-iommu/BN9PR11MB52768C98314A95AFCD2FA6478C0F2@… *) Drop patch 10 of v2 as it's a bug fix and can be submitted separately (Kevin) *) Rebase on top of Baolu's domain_alloc_paging refactor series (Jason) - Drop the attach_data which includes attach_fn and pasid, insteadly passing the pasid through the device attach path. (Jason) - Add a pasid-num-bits property to mock dev to make pasid selftest work (Kevin) v2: https://lore.kernel.org/linux-iommu/20240412081516.31168-1-yi.l.liu@intel.c… - Domain replace for pasid should be handled in set_dev_pasid() callbacks instead of remove_dev_pasid and call set_dev_pasid afteward in iommu layer (Jason) - Make xarray operations more self-contained in iommufd pasid attach/replace/detach (Jason) - Tweak the dev_iommu_get_max_pasids() to allow iommu driver to populate the max_pasids. This makes the iommufd selftest simpler to meet the max_pasids check in iommu_attach_device_pasid() (Jason) v1: https://lore.kernel.org/kvm/20231127063428.127436-1-yi.l.liu@intel.com/#r - Implemnet iommu_replace_device_pasid() to fall back to the original domain if this replacement failed (Kevin) - Add check in do_attach() to check corressponding attach_fn per the pasid value. rfc: https://lore.kernel.org/linux-iommu/20230926092651.17041-1-yi.l.liu@intel.c… Regards, Yi Liu Yi Liu (7): iommu: Introduce a replace API for device pasid iommufd: Pass pasid through the device attach/replace path iommufd: Support attach/replace hwpt per pasid iommufd/selftest: Add set_dev_pasid and remove_dev_pasid in mock iommu iommufd/selftest: Add a helper to get test device iommufd/selftest: Add test ops to test pasid attach/detach iommufd/selftest: Add coverage for iommufd pasid attach/detach drivers/iommu/iommu-priv.h | 3 + drivers/iommu/iommu.c | 80 ++++++- drivers/iommu/iommufd/Makefile | 1 + drivers/iommu/iommufd/device.c | 31 +-- drivers/iommu/iommufd/iommufd_private.h | 15 ++ drivers/iommu/iommufd/iommufd_test.h | 30 +++ drivers/iommu/iommufd/pasid.c | 157 +++++++++++++ drivers/iommu/iommufd/selftest.c | 206 ++++++++++++++++- include/linux/iommufd.h | 6 + tools/testing/selftests/iommu/iommufd.c | 207 ++++++++++++++++++ .../selftests/iommu/iommufd_fail_nth.c | 28 ++- tools/testing/selftests/iommu/iommufd_utils.h | 78 +++++++ 12 files changed, 808 insertions(+), 34 deletions(-) create mode 100644 drivers/iommu/iommufd/pasid.c -- 2.34.1

1 month, 1 week

4
13
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror July 2024