May 2024 - Linux-kselftest-mirror

[PATCH 0/4] selftest: x86: conform tests to TAP format output

by Muhammad Usama Anjum

In this series, 4 tests are being conformed to TAP. Muhammad Usama Anjum (4): selftests: x86: check_initial_reg_state: conform test to TAP format output selftests: x86: corrupt_xstate_header: conform test to TAP format output selftests: fsgsbase_restore: conform test to TAP format output selftests: entry_from_vm86: conform test to TAP format output .../selftests/x86/check_initial_reg_state.c | 24 ++-- .../selftests/x86/corrupt_xstate_header.c | 30 +++-- tools/testing/selftests/x86/entry_from_vm86.c | 109 ++++++++-------- .../testing/selftests/x86/fsgsbase_restore.c | 117 +++++++++--------- 4 files changed, 139 insertions(+), 141 deletions(-) -- 2.39.2

5 months, 2 weeks

2
13
0 0

[PATCH] selftests: openat2: don't print total number of tests and then skip

by Muhammad Usama Anjum

Don't print that 88 sub-tests are going to be executed. But then skip. The error is printed that executed test was only 1 while 88 should have run: Old output: TAP version 13 1..88 ok 2 # SKIP all tests require euid == 0 # Planned tests != run tests (88 != 1) # Totals: pass:0 fail:0 xfail:0 xpass:0 skip:1 error:0 New and correct output: TAP version 13 1..0 # SKIP all tests require euid == 0 Signed-off-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> --- tools/testing/selftests/openat2/resolve_test.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/openat2/resolve_test.c b/tools/testing/selftests/openat2/resolve_test.c index bbafad440893c..5472ec478d227 100644 --- a/tools/testing/selftests/openat2/resolve_test.c +++ b/tools/testing/selftests/openat2/resolve_test.c @@ -508,12 +508,13 @@ void test_openat2_opath_tests(void) int main(int argc, char **argv) { ksft_print_header(); - ksft_set_plan(NUM_TESTS); /* NOTE: We should be checking for CAP_SYS_ADMIN here... */ - if (geteuid() != 0) + if (geteuid()) ksft_exit_skip("all tests require euid == 0\n"); + ksft_set_plan(NUM_TESTS); + test_openat2_opath_tests(); if (ksft_get_fail_cnt() + ksft_get_error_cnt() > 0) -- 2.39.2

5 months, 2 weeks

3
6
0 0

[PATCH 1/2] selftests/thermel/intel: conform the test to TAP output

by Muhammad Usama Anjum

Conform the layout, informational and status messages to TAP. No functional change is intended other than the layout of output messages. Signed-off-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> --- .../intel/workload_hint/workload_hint_test.c | 98 ++++++++----------- 1 file changed, 39 insertions(+), 59 deletions(-) diff --git a/tools/testing/selftests/thermal/intel/workload_hint/workload_hint_test.c b/tools/testing/selftests/thermal/intel/workload_hint/workload_hint_test.c index 217c3a641c537..d107c2d6f3a22 100644 --- a/tools/testing/selftests/thermal/intel/workload_hint/workload_hint_test.c +++ b/tools/testing/selftests/thermal/intel/workload_hint/workload_hint_test.c @@ -9,6 +9,7 @@ #include <fcntl.h> #include <poll.h> #include <signal.h> +#include "../../../kselftest.h" #define WORKLOAD_NOTIFICATION_DELAY_ATTRIBUTE "/sys/bus/pci/devices/0000:00:04.0/workload_hint/notification_delay_ms" #define WORKLOAD_ENABLE_ATTRIBUTE "/sys/bus/pci/devices/0000:00:04.0/workload_hint/workload_hint_enable" @@ -31,17 +32,13 @@ void workload_hint_exit(int signum) /* Disable feature via sysfs knob */ fd = open(WORKLOAD_ENABLE_ATTRIBUTE, O_RDWR); - if (fd < 0) { - perror("Unable to open workload type feature enable file\n"); - exit(1); - } + if (fd < 0) + ksft_exit_fail_perror("Unable to open workload type feature enable file"); - if (write(fd, "0\n", 2) < 0) { - perror("Can' disable workload hints\n"); - exit(1); - } + if (write(fd, "0\n", 2) < 0) + ksft_exit_fail_perror("Can' disable workload hints"); - printf("Disabled workload type prediction\n"); + ksft_print_msg("Disabled workload type prediction\n"); close(fd); } @@ -54,32 +51,27 @@ int main(int argc, char **argv) char delay_str[64]; int delay = 0; - printf("Usage: workload_hint_test [notification delay in milli seconds]\n"); + ksft_print_header(); + ksft_set_plan(1); + + ksft_print_msg("Usage: workload_hint_test [notification delay in milli seconds]\n"); if (argc > 1) { ret = sscanf(argv[1], "%d", &delay); - if (ret < 0) { - printf("Invalid delay\n"); - exit(1); - } + if (ret < 0) + ksft_exit_fail_perror("Invalid delay"); - printf("Setting notification delay to %d ms\n", delay); + ksft_print_msg("Setting notification delay to %d ms\n", delay); if (delay < 0) - exit(1); - - sprintf(delay_str, "%s\n", argv[1]); + ksft_exit_fail_msg("delay can never be negative\n"); sprintf(delay_str, "%s\n", argv[1]); fd = open(WORKLOAD_NOTIFICATION_DELAY_ATTRIBUTE, O_RDWR); - if (fd < 0) { - perror("Unable to open workload notification delay\n"); - exit(1); - } + if (fd < 0) + ksft_exit_fail_perror("Unable to open workload notification delay"); - if (write(fd, delay_str, strlen(delay_str)) < 0) { - perror("Can't set delay\n"); - exit(1); - } + if (write(fd, delay_str, strlen(delay_str)) < 0) + ksft_exit_fail_perror("Can't set delay"); close(fd); } @@ -93,63 +85,51 @@ int main(int argc, char **argv) /* Enable feature via sysfs knob */ fd = open(WORKLOAD_ENABLE_ATTRIBUTE, O_RDWR); - if (fd < 0) { - perror("Unable to open workload type feature enable file\n"); - exit(1); - } + if (fd < 0) + ksft_exit_fail_perror("Unable to open workload type feature enable file"); - if (write(fd, "1\n", 2) < 0) { - perror("Can' enable workload hints\n"); - exit(1); - } + if (write(fd, "1\n", 2) < 0) + ksft_exit_fail_perror("Can' enable workload hints"); close(fd); - printf("Enabled workload type prediction\n"); + ksft_print_msg("Enabled workload type prediction\n"); while (1) { fd = open(WORKLOAD_TYPE_INDEX_ATTRIBUTE, O_RDONLY); - if (fd < 0) { - perror("Unable to open workload type file\n"); - exit(1); - } + if (fd < 0) + ksft_exit_fail_perror("Unable to open workload type file"); - if ((lseek(fd, 0L, SEEK_SET)) < 0) { - fprintf(stderr, "Failed to set pointer to beginning\n"); - exit(1); - } + if ((lseek(fd, 0L, SEEK_SET)) < 0) + ksft_exit_fail_perror("Failed to set pointer to beginning"); - if (read(fd, index_str, sizeof(index_str)) < 0) { - fprintf(stderr, "Failed to read from:%s\n", - WORKLOAD_TYPE_INDEX_ATTRIBUTE); - exit(1); - } + if (read(fd, index_str, sizeof(index_str)) < 0) + ksft_exit_fail_perror("Failed to read from: workload_type_index"); ufd.fd = fd; ufd.events = POLLPRI; ret = poll(&ufd, 1, -1); if (ret < 0) { - perror("poll error"); - exit(1); + ksft_exit_fail_perror("poll error"); } else if (ret == 0) { - printf("Poll Timeout\n"); + ksft_print_msg("Poll Timeout\n"); } else { - if ((lseek(fd, 0L, SEEK_SET)) < 0) { - fprintf(stderr, "Failed to set pointer to beginning\n"); - exit(1); - } + if ((lseek(fd, 0L, SEEK_SET)) < 0) + ksft_exit_fail_perror("Failed to set pointer to beginning"); - if (read(fd, index_str, sizeof(index_str)) < 0) - exit(0); + if (read(fd, index_str, sizeof(index_str)) < 0) { + ksft_test_result_pass("Successfully read\n"); + ksft_finished(); + } ret = sscanf(index_str, "%d", &index); if (ret < 0) break; if (index > WORKLOAD_TYPE_MAX_INDEX) - printf("Invalid workload type index\n"); + ksft_print_msg("Invalid workload type index\n"); else - printf("workload type:%s\n", workload_types[index]); + ksft_print_msg("workload type:%s\n", workload_types[index]); } close(fd); -- 2.39.2

5 months, 2 weeks

3
5
0 0

[PATCH] selftests: firmware: conform test to TAP

by Muhammad Usama Anjum

Conform the layout, informational and status messages to TAP. No functional change is intended other than the layout of output messages. Without using TAP messages, the passed/failed/skip test names cannot be found. This is a prepartory patch, more patches will be sent to comform the test completely. Signed-off-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> --- .../selftests/firmware/fw_run_tests.sh | 63 ++++++++++++------- 1 file changed, 40 insertions(+), 23 deletions(-) diff --git a/tools/testing/selftests/firmware/fw_run_tests.sh b/tools/testing/selftests/firmware/fw_run_tests.sh index f6d95a2d51249..5063c75345680 100755 --- a/tools/testing/selftests/firmware/fw_run_tests.sh +++ b/tools/testing/selftests/firmware/fw_run_tests.sh @@ -6,6 +6,9 @@ set -e +DIR="$(dirname $(readlink -f "$0"))" +source "${DIR}"/../kselftest/ktap_helpers.sh + TEST_DIR=$(dirname $0) source $TEST_DIR/fw_lib.sh @@ -26,54 +29,68 @@ run_tests() proc_set_force_sysfs_fallback $1 proc_set_ignore_sysfs_fallback $2 $TEST_DIR/fw_upload.sh + + ktap_test_pass "Completed" } run_test_config_0001() { - echo "-----------------------------------------------------" - echo "Running kernel configuration test 1 -- rare" - echo "Emulates:" - echo "CONFIG_FW_LOADER=y" - echo "CONFIG_FW_LOADER_USER_HELPER=n" - echo "CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n" + ktap_print_msg "-----------------------------------------------------" + ktap_print_msg "Running kernel configuration test 1 -- rare" + ktap_print_msg "Emulates:" + ktap_print_msg "CONFIG_FW_LOADER=y" + ktap_print_msg "CONFIG_FW_LOADER_USER_HELPER=n" + ktap_print_msg "CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n" run_tests 0 1 } run_test_config_0002() { - echo "-----------------------------------------------------" - echo "Running kernel configuration test 2 -- distro" - echo "Emulates:" - echo "CONFIG_FW_LOADER=y" - echo "CONFIG_FW_LOADER_USER_HELPER=y" - echo "CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n" + ktap_print_msg "-----------------------------------------------------" + ktap_print_msg "Running kernel configuration test 2 -- distro" + ktap_print_msg "Emulates:" + ktap_print_msg "CONFIG_FW_LOADER=y" + ktap_print_msg "CONFIG_FW_LOADER_USER_HELPER=y" + ktap_print_msg "CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n" proc_set_ignore_sysfs_fallback 0 run_tests 0 0 } run_test_config_0003() { - echo "-----------------------------------------------------" - echo "Running kernel configuration test 3 -- android" - echo "Emulates:" - echo "CONFIG_FW_LOADER=y" - echo "CONFIG_FW_LOADER_USER_HELPER=y" - echo "CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y" + ktap_print_msg "-----------------------------------------------------" + ktap_print_msg "Running kernel configuration test 3 -- android" + ktap_print_msg "Emulates:" + ktap_print_msg "CONFIG_FW_LOADER=y" + ktap_print_msg "CONFIG_FW_LOADER_USER_HELPER=y" + ktap_print_msg "CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y" run_tests 1 0 } +ktap_print_header + check_mods check_setup -echo "Running namespace test: " -$TEST_DIR/fw_namespace $DIR/trigger_request -echo "OK" - if [ -f $FW_FORCE_SYSFS_FALLBACK ]; then + ktap_set_plan "4" + run_test_config_0001 run_test_config_0002 run_test_config_0003 else - echo "Running basic kernel configuration, working with your config" + ktap_set_plan "2" + + ktap_print_msg "Running basic kernel configuration, working with your config" run_tests fi + +ktap_print_msg "Running namespace test: " +$TEST_DIR/fw_namespace $DIR/trigger_request +if [ $? -eq 0 ]; then + ktap_test_pass "fw_namespace completed successfully" +else + ktap_test_fail "fw_namespace failed" +fi + +ktap_finished -- 2.39.2

5 months, 2 weeks

2
2
0 0

[RFC] ktap_v2: KTAP specification transition method

by Frank Rowand

In the middle of the thread about a patch to add the skip test result, I suggested documenting the process of deprecating the KTAP v1 Specification method of marking a skipped test: https://lore.kernel.org/all/490271eb-1429-2217-6e38-837c6e5e328b@gmail.com/… In a reply to that email I suggested that we ought to have a process to transition the KTAP Specification from v1 to v2, and possibly v3 and future. This email is meant to be the root of that discussion. My initial thinking is that there are at least three different types of project and/or community that may have different needs in this area. Type 1 - project controls both the test output generation and the test output parsing tool. Both generation and parsing code are in the same repository and/or synchronized versions are distributed together. Devicetree unittests are an example of Type 1. I plan to maintain changes of test output to KTAP v2 format in coordination with updating the parser to process KTAP v2 data. Type 2 - project controls both the test output generation and the test output parsing tool. The test output generation and a parser modifications may be controlled by the project BUT there are one or more external testing projects that (1) may have their own parsers, and (2) may have a single framework that tests multiple versions of the tests. I think that kselftest and kunit tests are probably examples of Type 2. I also think that DT unittests will become a Type 2 project as a result of converting to KTAP v2 data. Type 3 - project may create and maintain some tests, but is primarily a consumer of tests created by other projects. Type 3 projects typically have a single framework that is able to execute and process multiple versions of the tests. The Fuego test project is an example of Type 3. Maybe adding all of this complexity of different Types in my initial thinking was silly -- maybe everything in this topic is governed by the more complex Type 3. My thinking was that the three different Types of project would be impacted in different ways by transition plans. Type 3 would be the most impacted, so I wanted to be sure that any transition plan especially considered their needs. There is an important aspect of the KTAP format that might ease the transition from one version to another: All KTAP formatted results begin with a "version line", so as soon as a parser has processed the first line of a test, it can apply the appropriate KTAP Specification version to all subsequent lines of test output. A parser implementation could choose to process all versions, could choose to invoke a version specific parser, or some other approach all together. In the "add skip test results" thread, I suggested deprecating the v1 method of marking a skipped test in v2, with a scheduled removal of the v1 method in v3. But since the KTAP format version is available in the very first line of test output, is it necessary to do a slow deprecation and removal over two versions? One argument to doing a two version deprecation/removal process is that a parser that is one version older the the test output _might_ be able to process the test output without error, but would not be able to take advantage of features added in the newer version of the Specification. My opinion is that a two version deprecation/removal process will slow the Specification update process and lead to more versions of the Specification over a given time interval. A one version deprecation/removal process puts more of a burden on Type 3 projects and external parsers for Type 2 projects to implement parsers that can process the newer Specification more quickly and puts a burden on test maintainers to delay a move to the newer Specification, or possibly pressure to support selection of more than one Specification version format for output data. One additional item... On the KTAP Specification version 2 process wiki page, I suggested that it is "desirable for test result parsers that understand the KTAP Specification version 2 data also be able to parse version 1 data." With the implication "Converting version 1 compliant data to version 2 compliant data should not require a "flag day" switch of test result parsers." If this thread discussion results in a different decision, I will update the wiki. Thoughts? -Frank

5 months, 2 weeks

3
2
0 0

[PATCH 0/6] defconfig: drop RT_GROUP_SCHED=y

by Celeste Liu

For cgroup v1, if turned on, and there's any cgroup in the "cpu" hierarchy it needs an RT budget assigned, otherwise the processes in it will not be able to get RT at all. The problem with RT group scheduling is that it requires the budget assigned but there's no way we could assign a default budget, since the values to assign are both upper and lower time limits, are absolute, and need to be sum up to < 1 for each individal cgroup. That means we cannot really come up with values that would work by default in the general case.[1] For cgroup v2, it's almost unusable as well. If it turned on, the cpu controller can only be enabled when all RT processes are in the root cgroup. But it will lose the benefits of cgroup v2 if all RT process were placed in the same cgroup. Red Hat, Gentoo, Arch Linux and Debian all disable it. systemd also doesn't support it.[2] I leave tools/testing/selftests/bpf/config.{s390x,aarch64} untouched because I don't whether bpf testing requires it. [1]: https://bugzilla.redhat.com/show_bug.cgi?id=1229700 [2]: https://github.com/systemd/systemd/issues/13781#issuecomment-549164383 Celeste Liu (6): riscv: defconfig: drop RT_GROUP_SCHED=y loongarch: defconfig: drop RT_GROUP_SCHED=y mips: defconfig: drop RT_GROUP_SCHED=y from generic/db1xxx/eyeq5 powerpc: defconfig: drop RT_GROUP_SCHED=y from ppc6xx_defconfig sh: defconfig: drop RT_GROUP_SCHED=y from sdk7786/urquell arm: defconfig: drop RT_GROUP_SCHED=y from bcm2855/tegra/omap2plus arch/arm/configs/bcm2835_defconfig | 1 - arch/arm/configs/omap2plus_defconfig | 1 - arch/arm/configs/tegra_defconfig | 1 - arch/loongarch/configs/loongson3_defconfig | 1 - arch/mips/configs/db1xxx_defconfig | 1 - arch/mips/configs/eyeq5_defconfig | 1 - arch/mips/configs/generic_defconfig | 1 - arch/powerpc/configs/ppc6xx_defconfig | 1 - arch/riscv/configs/defconfig | 1 - arch/sh/configs/sdk7786_defconfig | 1 - arch/sh/configs/urquell_defconfig | 1 - 11 files changed, 11 deletions(-) -- 2.45.1

5 months, 2 weeks

6
12
0 0

[PATCH v3 0/7] selftests/x86: fix build errors and warnings found via clang

by John Hubbard

Hi, Dave Hansen, Muhammad Usama Anjum, here is the combined series that we discussed yesterday [1]. As I mentioned then, this is a bit intrusive--but no more than necessary, IMHO. Specifically, it moves some clang-un-inlineable things out to "pure" assembly code files. I've tested this by building with clang, then running each binary on my x86_64 test system with today's 6.10-rc1, and comparing the console and dmesg output to a gcc-based build without these patches applied. Aside from timestamps and virtual addresses, it looks identical. Earlier cover letter: Just a bunch of build and warnings fixes that show up when building with clang. Some of these depend on each other, so I'm sending them as a series. Changes since v2: 1) Dropped my test_FISTTP.c patch, and picked up Muhammad's fix instead, seeing as how that was posted first. 2) Updated patch descriptions to reflect that Valentin Obst's build fix for LLVM [1] has already been merged into Linux main. 3) Minor wording and typo corrections in the commit logs throughout. Changes since the first version: 1) Rebased onto Linux 6.10-rc1 Enjoy! [1] https://lore.kernel.org/44428518-4d21-4de7-8587-04eceefb330d@nvidia.com thanks, John Hubbard John Hubbard (6): selftests/x86: fix Makefile dependencies to work with clang selftests/x86: build fsgsbase_restore.c with clang selftests/x86: build sysret_rip.c with clang selftests/x86: avoid -no-pie warnings from clang during compilation selftests/x86: remove (or use) unused variables and functions selftests/x86: fix printk warnings reported by clang Muhammad Usama Anjum (1): selftests: x86: test_FISTTP: use fisttps instead of ambiguous fisttp tools/testing/selftests/x86/Makefile | 31 +++++++++++++++---- tools/testing/selftests/x86/amx.c | 16 ---------- .../testing/selftests/x86/clang_helpers_32.S | 11 +++++++ .../testing/selftests/x86/clang_helpers_64.S | 28 +++++++++++++++++ tools/testing/selftests/x86/fsgsbase.c | 6 ---- .../testing/selftests/x86/fsgsbase_restore.c | 11 +++---- tools/testing/selftests/x86/sigreturn.c | 2 +- .../testing/selftests/x86/syscall_arg_fault.c | 1 - tools/testing/selftests/x86/sysret_rip.c | 20 ++++-------- tools/testing/selftests/x86/test_FISTTP.c | 8 ++--- tools/testing/selftests/x86/test_vsyscall.c | 15 +++------ tools/testing/selftests/x86/vdso_restorer.c | 2 ++ 12 files changed, 87 insertions(+), 64 deletions(-) create mode 100644 tools/testing/selftests/x86/clang_helpers_32.S create mode 100644 tools/testing/selftests/x86/clang_helpers_64.S base-commit: 4a4be1ad3a6efea16c56615f31117590fd881358 -- 2.45.1

5 months, 3 weeks

2
12
0 0

[PATCH 0/2] Modify the watchdog selftest for execution with kselftest runner

by Laura Nao

The watchdog selftest script supports various parameters for testing different IOCTLs. The watchdog ping functionality is validated by starting a loop where the watchdog device is periodically pet, which can only be stopped by the user interrupting the script. This results in a timeout when running this test using the kselftest runner with no non-oneshot parameters (or no parameters at all): TAP version 13 1..1 # timeout set to 45 # selftests: watchdog: watchdog-test # Watchdog Ticking Away! # .............................................# not ok 1 selftests: watchdog: watchdog-test # TIMEOUT 45 seconds To address this issue, the first patch in this series limits the loop to 5 iterations by default and adds support for a new '-c' option to customize the number of pings as required. The second patch conforms the test output to the KTAP format. Laura Nao (2): selftests/watchdog: limit ping loop and allow configuring the number of pings selftests/watchdog: convert the test output to KTAP format .../selftests/watchdog/watchdog-test.c | 166 +++++++++++------- 1 file changed, 101 insertions(+), 65 deletions(-) -- 2.30.2

5 months, 3 weeks

2
14
0 0

[PATCH] selftests: tpm2: conform test to TAP output

by Muhammad Usama Anjum

The python unittest is being used for executing tests. TAP output cannot be added in the unittest framework. The python unittest is being run from a script. Add the output TAP logs to the script. Add "#" prefix to the python unittest output which will mark all output as informational TAP messages. Check exit status of the python unittest to decide if test passed or failed. Not sure why but python unittest outputs logs in stderr. So redirect the logs to stdout and then add prefix. Specify the bash explicitly instead of sh to run these tests as all of the kselftests are shifting towards using bash explicitly. Some interpreters have different syntax and cause issues. Signed-off-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> --- tools/testing/selftests/tpm2/test_async.sh | 24 ++++++++++++++++------ tools/testing/selftests/tpm2/test_smoke.sh | 19 ++++++++++++++--- tools/testing/selftests/tpm2/test_space.sh | 19 ++++++++++++++--- 3 files changed, 50 insertions(+), 12 deletions(-) diff --git a/tools/testing/selftests/tpm2/test_async.sh b/tools/testing/selftests/tpm2/test_async.sh index 43bf5bd772fd4..0e6e5d9d649fb 100755 --- a/tools/testing/selftests/tpm2/test_async.sh +++ b/tools/testing/selftests/tpm2/test_async.sh @@ -1,10 +1,22 @@ -#!/bin/sh +#!/bin/bash # SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 +DIR="$(dirname $(readlink -f "$0"))" +source "${DIR}"/../kselftest/ktap_helpers.sh -[ -e /dev/tpm0 ] || exit $ksft_skip -[ -e /dev/tpmrm0 ] || exit $ksft_skip +ktap_print_header -python3 -m unittest -v tpm2_tests.AsyncTest +[ -e /dev/tpm0 ] || ktap_finished +[ -e /dev/tpmrm0 ] || ktap_finished + +ktap_set_plan 1 + +python3 -m unittest -v tpm2_tests.AsyncTest 2>&1 | sed "s/^/# /" + +if [ ${PIPESTATUS[0]} -eq $ksft_pass ]; then + ktap_test_pass "tpm2_tests.AsyncTest" +else + ktap_test_fail "tpm2_tests.AsyncTest" +fi + +ktap_finished diff --git a/tools/testing/selftests/tpm2/test_smoke.sh b/tools/testing/selftests/tpm2/test_smoke.sh index 58af963e5b55a..2219a180de91d 100755 --- a/tools/testing/selftests/tpm2/test_smoke.sh +++ b/tools/testing/selftests/tpm2/test_smoke.sh @@ -1,9 +1,22 @@ -#!/bin/sh +#!/bin/bash # SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) # Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 +DIR="$(dirname $(readlink -f "$0"))" +source "${DIR}"/../kselftest/ktap_helpers.sh + +ktap_print_header [ -e /dev/tpm0 ] || exit $ksft_skip -python3 -m unittest -v tpm2_tests.SmokeTest +ktap_set_plan 1 + +python3 -m unittest -v tpm2_tests.SmokeTest 2>&1 | sed "s/^/# /" + +if [ ${PIPESTATUS[0]} -eq $ksft_pass ]; then + ktap_test_pass "tpm2_tests.AsyncTest" +else + ktap_test_fail "tpm2_tests.AsyncTest" +fi + +ktap_finished diff --git a/tools/testing/selftests/tpm2/test_space.sh b/tools/testing/selftests/tpm2/test_space.sh index 04c47b13fe8ac..6a55d13d74983 100755 --- a/tools/testing/selftests/tpm2/test_space.sh +++ b/tools/testing/selftests/tpm2/test_space.sh @@ -1,9 +1,22 @@ -#!/bin/sh +#!/bin/bash # SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause) # Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 +DIR="$(dirname $(readlink -f "$0"))" +source "${DIR}"/../kselftest/ktap_helpers.sh + +ktap_print_header [ -e /dev/tpmrm0 ] || exit $ksft_skip -python3 -m unittest -v tpm2_tests.SpaceTest +ktap_set_plan 1 + +python3 -m unittest -v tpm2_tests.SpaceTest 2>&1 | sed "s/^/# /" + +if [ ${PIPESTATUS[0]} -eq $ksft_pass ]; then + ktap_test_pass "tpm2_tests.AsyncTest" +else + ktap_test_fail "tpm2_tests.AsyncTest" +fi + +ktap_finished -- 2.39.2

5 months, 3 weeks

2
3
0 0

[PATCH 0/3] tools/nolibc: implement strerror()

by Thomas Weißschuh

Adds a simple implementation of strerror() and makes use of it in kselftests. Shuah, could you Ack patch 3? Willy, this should work *without* your Ack. Signed-off-by: Thomas Weißschuh <linux(a)weissschuh.net> --- Thomas Weißschuh (3): selftests/nolibc: introduce condition to run tests only on nolibc tools/nolibc: implement strerror() selftests: kselftest: also use strerror() on nolibc tools/include/nolibc/stdio.h | 10 ++++++++ tools/testing/selftests/kselftest.h | 8 ------- tools/testing/selftests/nolibc/nolibc-test.c | 36 ++++++++++++++++++---------- 3 files changed, 33 insertions(+), 21 deletions(-) --- base-commit: a3063ba97f31e0364379a3ffc567203e3f79e877 change-id: 20240425-nolibc-strerror-67f4bfa03035 Best regards, -- Thomas Weißschuh <linux(a)weissschuh.net>

5 months, 4 weeks

2
8
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror May 2024