March 2024 - Linux-kselftest-mirror

[RFC PATCH net-next v7 00/14] Device Memory TCP

by Mina Almasry

RFC v7: ======= Major Changes: -------------- This revision largely rebases on top of net-next and addresses the feedback RFCv6 received from folks, namely Jakub, Yunsheng, Arnd, David, & Pavel. The series remains in RFC because the queue-API ndos defined in this series are not yet implemented. I have a GVE implementation I carry out of tree for my testing. A upstreamable GVE implementation is in the works. Aside from that, in my estimation all the patches are ready for review/merge. Please do take a look. As usual the full devmem TCP changes including the full GVE driver implementation is here: https://github.com/mina/linux/commits/tcpdevmem-v7/ Detailed changelog: - Use admin-perm in netlink API. - Addressed feedback from Jakub with regards to netlink API implementation. - Renamed devmem.c functions to something more appropriate for that file. - Improve the performance seen through the page_pool benchmark. - Fix the value definition of all the SO_DEVMEM_* uapi. - Various fixes to documentation. Perf - page-pool benchmark: --------------------------- Improved performance of bench_page_pool_simple.ko tests compared to v6: https://pastebin.com/raw/v5dYRg8L net-next base: 8 cycle fast path. RFC v6: 10 cycle fast path. RFC v7: 9 cycle fast path. RFC v7 with CONFIG_DMA_SHARED_BUFFER disabled: 8 cycle fast path, same as baseline. Perf - Devmem TCP benchmark: --------------------- Perf is about the same regardless of the changes in v7, namely the removal of the static_branch_unlikely to improve the page_pool benchmark performance: 189/200gbps bi-directional throughput with RX devmem TCP and regular TCP TX i.e. ~95% line rate. RFC v6: ======= Major Changes: -------------- This revision largely rebases on top of net-next and addresses the little feedback RFCv5 received. The series remains in RFC because the queue-API ndos defined in this series are not yet implemented. I have a GVE implementation I carry out of tree for my testing. A upstreamable GVE implementation is in the works. Aside from that, in my estimation all the patches are ready for review/merge. Please do take a look. As usual the full devmem TCP changes including the full GVE driver implementation is here: https://github.com/mina/linux/commits/tcpdevmem-v6/ This version also comes with some performance data recorded in the cover letter (see below changelog). Detailed changelog: - Rebased on top of the merged netmem_ref changes. - Converted skb->dmabuf to skb->readable (Pavel). Pavel's original suggestion was to remove the skb->dmabuf flag entirely, but when I looked into it closely, I found the issue that if we remove the flag we have to dereference the shinfo(skb) pointer to obtain the first frag to tell whether an skb is readable or not. This can cause a performance regression if it dirties the cache line when the shinfo(skb) was not really needed. Instead, I converted the skb->dmabuf flag into a generic skb->readable flag which can be re-used by io_uring 0-copy RX. - Squashed a few locking optimizations from Eric Dumazet in the RX path and the DEVMEM_DONTNEED setsockopt. - Expanded the tests a bit. Added validation for invalid scenarios and added some more coverage. Perf - page-pool benchmark: --------------------------- bench_page_pool_simple.ko tests with and without these changes: https://pastebin.com/raw/ncHDwAbn AFAIK the number that really matters in the perf tests is the 'tasklet_page_pool01_fast_path Per elem'. This one measures at about 8 cycles without the changes but there is some 1 cycle noise in some results. With the patches this regresses to 9 cycles with the changes but there is 1 cycle noise occasionally running this test repeatedly. Lastly I tried disable the static_branch_unlikely() in netmem_is_net_iov() check. To my surprise disabling the static_branch_unlikely() check reduces the fast path back to 8 cycles, but the 1 cycle noise remains. Perf - Devmem TCP benchmark: --------------------- 189/200gbps bi-directional throughput with RX devmem TCP and regular TCP TX i.e. ~95% line rate. Major changes in RFC v5: ======================== 1. Rebased on top of 'Abstract page from net stack' series and used the new netmem type to refer to LSB set pointers instead of re-using struct page. 2. Downgraded this series back to RFC and called it RFC v5. This is because this series is now dependent on 'Abstract page from net stack'[1] and the queue API. Both are removed from the series to reduce the patch # and those bits are fairly independent or pre-requisite work. 3. Reworked the page_pool devmem support to use netmem and for some more unified handling. 4. Reworked the reference counting of net_iov (renamed from page_pool_iov) to use pp_ref_count for refcounting. The full changes including the dependent series and GVE page pool support is here: https://github.com/mina/linux/commits/tcpdevmem-rfcv5/ [1] https://patchwork.kernel.org/project/netdevbpf/list/?series=810774 Major changes in v1: ==================== 1. Implemented MVP queue API ndos to remove the userspace-visible driver reset. 2. Fixed issues in the napi_pp_put_page() devmem frag unref path. 3. Removed RFC tag. Many smaller addressed comments across all the patches (patches have individual change log). Full tree including the rest of the GVE driver changes: https://github.com/mina/linux/commits/tcpdevmem-v1 Changes in RFC v3: ================== 1. Pulled in the memory-provider dependency from Jakub's RFC[1] to make the series reviewable and mergeable. 2. Implemented multi-rx-queue binding which was a todo in v2. 3. Fix to cmsg handling. The sticking point in RFC v2[2] was the device reset required to refill the device rx-queues after the dmabuf bind/unbind. The solution suggested as I understand is a subset of the per-queue management ops Jakub suggested or similar: https://lore.kernel.org/netdev/20230815171638.4c057dcd@kernel.org/ This is not addressed in this revision, because: 1. This point was discussed at netconf & netdev and there is openness to using the current approach of requiring a device reset. 2. Implementing individual queue resetting seems to be difficult for my test bed with GVE. My prototype to test this ran into issues with the rx-queues not coming back up properly if reset individually. At the moment I'm unsure if it's a mistake in the POC or a genuine issue in the virtualization stack behind GVE, which currently doesn't test individual rx-queue restart. 3. Our usecases are not bothered by requiring a device reset to refill the buffer queues, and we'd like to support NICs that run into this limitation with resetting individual queues. My thought is that drivers that have trouble with per-queue configs can use the support in this series, while drivers that support new netdev ops to reset individual queues can automatically reset the queue as part of the dma-buf bind/unbind. The same approach with device resets is presented again for consideration with other sticking points addressed. This proposal includes the rx devmem path only proposed for merge. For a snapshot of my entire tree which includes the GVE POC page pool support & device memory support: https://github.com/torvalds/linux/compare/master...mina:linux:tcpdevmem-v3 [1] https://lore.kernel.org/netdev/f8270765-a27b-6ccf-33ea-cda097168d79@redhat.… [2] https://lore.kernel.org/netdev/CAHS8izOVJGJH5WF68OsRWFKJid1_huzzUK+hpKbLcL4… Changes in RFC v2: ================== The sticking point in RFC v1[1] was the dma-buf pages approach we used to deliver the device memory to the TCP stack. RFC v2 is a proof-of-concept that attempts to resolve this by implementing scatterlist support in the networking stack, such that we can import the dma-buf scatterlist directly. This is the approach proposed at a high level here[2]. Detailed changes: 1. Replaced dma-buf pages approach with importing scatterlist into the page pool. 2. Replace the dma-buf pages centric API with a netlink API. 3. Removed the TX path implementation - there is no issue with implementing the TX path with scatterlist approach, but leaving out the TX path makes it easier to review. 4. Functionality is tested with this proposal, but I have not conducted perf testing yet. I'm not sure there are regressions, but I removed perf claims from the cover letter until they can be re-confirmed. 5. Added Signed-off-by: contributors to the implementation. 6. Fixed some bugs with the RX path since RFC v1. Any feedback welcome, but specifically the biggest pending questions needing feedback IMO are: 1. Feedback on the scatterlist-based approach in general. 2. Netlink API (Patch 1 & 2). 3. Approach to handle all the drivers that expect to receive pages from the page pool (Patch 6). [1] https://lore.kernel.org/netdev/dfe4bae7-13a0-3c5d-d671-f61b375cb0b4@gmail.c… [2] https://lore.kernel.org/netdev/CAHS8izPm6XRS54LdCDZVd0C75tA1zHSu6jLVO8nzTLX… ================== * TL;DR: Device memory TCP (devmem TCP) is a proposal for transferring data to and/or from device memory efficiently, without bouncing the data to a host memory buffer. * Problem: A large amount of data transfers have device memory as the source and/or destination. Accelerators drastically increased the volume of such transfers. Some examples include: - ML accelerators transferring large amounts of training data from storage into GPU/TPU memory. In some cases ML training setup time can be as long as 50% of TPU compute time, improving data transfer throughput & efficiency can help improving GPU/TPU utilization. - Distributed training, where ML accelerators, such as GPUs on different hosts, exchange data among them. - Distributed raw block storage applications transfer large amounts of data with remote SSDs, much of this data does not require host processing. Today, the majority of the Device-to-Device data transfers the network are implemented as the following low level operations: Device-to-Host copy, Host-to-Host network transfer, and Host-to-Device copy. The implementation is suboptimal, especially for bulk data transfers, and can put significant strains on system resources, such as host memory bandwidth, PCIe bandwidth, etc. One important reason behind the current state is the kernel’s lack of semantics to express device to network transfers. * Proposal: In this patch series we attempt to optimize this use case by implementing socket APIs that enable the user to: 1. send device memory across the network directly, and 2. receive incoming network packets directly into device memory. Packet _payloads_ go directly from the NIC to device memory for receive and from device memory to NIC for transmit. Packet _headers_ go to/from host memory and are processed by the TCP/IP stack normally. The NIC _must_ support header split to achieve this. Advantages: - Alleviate host memory bandwidth pressure, compared to existing network-transfer + device-copy semantics. - Alleviate PCIe BW pressure, by limiting data transfer to the lowest level of the PCIe tree, compared to traditional path which sends data through the root complex. * Patch overview: ** Part 1: netlink API Gives user ability to bind dma-buf to an RX queue. ** Part 2: scatterlist support Currently the standard for device memory sharing is DMABUF, which doesn't generate struct pages. On the other hand, networking stack (skbs, drivers, and page pool) operate on pages. We have 2 options: 1. Generate struct pages for dmabuf device memory, or, 2. Modify the networking stack to process scatterlist. Approach #1 was attempted in RFC v1. RFC v2 implements approach #2. ** part 3: page pool support We piggy back on page pool memory providers proposal: https://github.com/kuba-moo/linux/tree/pp-providers It allows the page pool to define a memory provider that provides the page allocation and freeing. It helps abstract most of the device memory TCP changes from the driver. ** part 4: support for unreadable skb frags Page pool iovs are not accessible by the host; we implement changes throughput the networking stack to correctly handle skbs with unreadable frags. ** Part 5: recvmsg() APIs We define user APIs for the user to send and receive device memory. Not included with this series is the GVE devmem TCP support, just to simplify the review. Code available here if desired: https://github.com/mina/linux/tree/tcpdevmem This series is built on top of net-next with Jakub's pp-providers changes cherry-picked. * NIC dependencies: 1. (strict) Devmem TCP require the NIC to support header split, i.e. the capability to split incoming packets into a header + payload and to put each into a separate buffer. Devmem TCP works by using device memory for the packet payload, and host memory for the packet headers. 2. (optional) Devmem TCP works better with flow steering support & RSS support, i.e. the NIC's ability to steer flows into certain rx queues. This allows the sysadmin to enable devmem TCP on a subset of the rx queues, and steer devmem TCP traffic onto these queues and non devmem TCP elsewhere. The NIC I have access to with these properties is the GVE with DQO support running in Google Cloud, but any NIC that supports these features would suffice. I may be able to help reviewers bring up devmem TCP on their NICs. * Testing: The series includes a udmabuf kselftest that show a simple use case of devmem TCP and validates the entire data path end to end without a dependency on a specific dmabuf provider. ** Test Setup Kernel: net-next with this series and memory provider API cherry-picked locally. Hardware: Google Cloud A3 VMs. NIC: GVE with header split & RSS & flow steering support. Cc: Pavel Begunkov <asml.silence(a)gmail.com> Cc: David Wei <dw(a)davidwei.uk> Cc: Jason Gunthorpe <jgg(a)ziepe.ca> Cc: Yunsheng Lin <linyunsheng(a)huawei.com> Cc: Shailend Chand <shailend(a)google.com> Cc: Harshitha Ramamurthy <hramamurthy(a)google.com> Cc: Shakeel Butt <shakeel.butt(a)linux.dev> Cc: Jeroen de Borst <jeroendb(a)google.com> Cc: Praveen Kaligineedi <pkaligineedi(a)google.com> Jakub Kicinski (1): net: page_pool: create hooks for custom page providers Mina Almasry (13): queue_api: define queue api net: netdev netlink api to bind dma-buf to a net device netdev: support binding dma-buf to netdevice netdev: netdevice devmem allocator page_pool: convert to use netmem page_pool: devmem support memory-provider: dmabuf devmem memory provider net: support non paged skb frags net: add support for skbs with unreadable frags tcp: RX path for devmem TCP net: add SO_DEVMEM_DONTNEED setsockopt to release RX frags net: add devmem TCP documentation selftests: add ncdevmem, netcat for devmem TCP Documentation/netlink/specs/netdev.yaml | 57 +++ Documentation/networking/devmem.rst | 256 +++++++++++ Documentation/networking/index.rst | 1 + arch/alpha/include/uapi/asm/socket.h | 6 + arch/mips/include/uapi/asm/socket.h | 6 + arch/parisc/include/uapi/asm/socket.h | 6 + arch/sparc/include/uapi/asm/socket.h | 6 + include/linux/netdevice.h | 3 + include/linux/skbuff.h | 73 +++- include/linux/socket.h | 1 + include/net/devmem.h | 124 ++++++ include/net/netdev_queues.h | 27 ++ include/net/netdev_rx_queue.h | 2 + include/net/netmem.h | 234 +++++++++- include/net/page_pool/helpers.h | 155 +++++-- include/net/page_pool/types.h | 33 +- include/net/sock.h | 2 + include/net/tcp.h | 5 +- include/trace/events/page_pool.h | 29 +- include/uapi/asm-generic/socket.h | 6 + include/uapi/linux/netdev.h | 19 + include/uapi/linux/uio.h | 17 + net/bpf/test_run.c | 5 +- net/core/Makefile | 2 +- net/core/datagram.c | 6 + net/core/dev.c | 6 +- net/core/devmem.c | 425 ++++++++++++++++++ net/core/gro.c | 8 +- net/core/netdev-genl-gen.c | 23 + net/core/netdev-genl-gen.h | 6 + net/core/netdev-genl.c | 107 +++++ net/core/page_pool.c | 364 +++++++++------- net/core/skbuff.c | 110 ++++- net/core/sock.c | 61 +++ net/ipv4/esp4.c | 2 +- net/ipv4/tcp.c | 254 ++++++++++- net/ipv4/tcp_input.c | 13 +- net/ipv4/tcp_ipv4.c | 9 + net/ipv4/tcp_minisocks.c | 2 + net/ipv4/tcp_output.c | 5 +- net/ipv6/esp6.c | 2 +- net/packet/af_packet.c | 4 +- tools/include/uapi/linux/netdev.h | 19 + tools/testing/selftests/net/.gitignore | 1 + tools/testing/selftests/net/Makefile | 5 + tools/testing/selftests/net/ncdevmem.c | 546 ++++++++++++++++++++++++ 46 files changed, 2776 insertions(+), 277 deletions(-) create mode 100644 Documentation/networking/devmem.rst create mode 100644 include/net/devmem.h create mode 100644 net/core/devmem.c create mode 100644 tools/testing/selftests/net/ncdevmem.c -- 2.44.0.396.g6e790dbe36-goog

9 months

3
20
0 0

[PATCH v5 0/3] selftests/resctrl: Simplify test cleanup functions

by Maciej Wieczor-Retman

Cleaning up after tests is implemented separately for individual tests and called at the end of each test execution. Since these functions are very similar and a more generalized test framework was introduced a function pointer in the resctrl_test struct can be used to reduce the amount of function calls. These functions are also all called in the ctrl-c handler because the handler isn't aware which test is currently running. Since the handler is implemented with a sigaction no function parameters can be passed there but information about what test is currently running can be passed with a global variable. Series applies cleanly on top of kselftests/next. Changelog v5: - Rebase onto kselftests/next. - Add Reinette's reviewed-by tag. Changelog v4: - Check current_test pointer and reset it in signal unregistering. - Move cleanup call to test_cleanup function. Changelog v3: - Make current_test static. - Add callback NULL check to the ctrl-c handler. Changelog v2: - Make current_test a const pointer limited in scope to resctrl_val file. - Remove tests_cleanup from resctrl.h. - Cleanup 'goto out' path and labels in individual test functions. Older versions of this series: [v1] https://lore.kernel.org/all/cover.1708434017.git.maciej.wieczor-retman@inte… [v2] https://lore.kernel.org/all/cover.1708596015.git.maciej.wieczor-retman@inte… [v3] https://lore.kernel.org/all/cover.1708599491.git.maciej.wieczor-retman@inte… [v4] https://lore.kernel.org/all/cover.1708949785.git.maciej.wieczor-retman@inte… Maciej Wieczor-Retman (3): selftests/resctrl: Add cleanup function to test framework selftests/resctrl: Simplify cleanup in ctrl-c handler selftests/resctrl: Move cleanups out of individual tests tools/testing/selftests/resctrl/cat_test.c | 8 +++----- tools/testing/selftests/resctrl/cmt_test.c | 4 ++-- tools/testing/selftests/resctrl/mba_test.c | 8 +++----- tools/testing/selftests/resctrl/mbm_test.c | 8 +++----- tools/testing/selftests/resctrl/resctrl.h | 9 +++------ .../testing/selftests/resctrl/resctrl_tests.c | 20 +++++++------------ tools/testing/selftests/resctrl/resctrl_val.c | 8 ++++++-- 7 files changed, 27 insertions(+), 38 deletions(-) -- 2.43.2

9 months

4
8
0 0

[PATCH v2 1/3] selftests: x86: test_vsyscall: reorder code to reduce #ifdef blocks

by Muhammad Usama Anjum

There are multiple #ifdef blocks inside functions where they return just 0 if #ifdef is false. This makes number of tests counting difficult. Move those functions inside one #ifdef block and move all of them together. This is preparatory patch for next patch to convert this into TAP format. So in this patch, we are just moving functions around without any changes. With and without this patch, the output of this patch is same. Signed-off-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> --- tools/testing/selftests/x86/test_vsyscall.c | 176 +++++++++----------- 1 file changed, 83 insertions(+), 93 deletions(-) diff --git a/tools/testing/selftests/x86/test_vsyscall.c b/tools/testing/selftests/x86/test_vsyscall.c index 47cab972807c4..c78b0648aa524 100644 --- a/tools/testing/selftests/x86/test_vsyscall.c +++ b/tools/testing/selftests/x86/test_vsyscall.c @@ -21,6 +21,7 @@ #include <sys/uio.h> #include "helpers.h" +#include "../kselftest.h" #ifdef __x86_64__ # define VSYS(x) (x) @@ -39,18 +40,6 @@ /* max length of lines in /proc/self/maps - anything longer is skipped here */ #define MAPS_LINE_LEN 128 -static void sethandler(int sig, void (*handler)(int, siginfo_t *, void *), - int flags) -{ - struct sigaction sa; - memset(&sa, 0, sizeof(sa)); - sa.sa_sigaction = handler; - sa.sa_flags = SA_SIGINFO | flags; - sigemptyset(&sa.sa_mask); - if (sigaction(sig, &sa, 0)) - err(1, "sigaction"); -} - /* vsyscalls and vDSO */ bool vsyscall_map_r = false, vsyscall_map_x = false; @@ -96,64 +85,6 @@ static void init_vdso(void) printf("[WARN]\tfailed to find getcpu in vDSO\n"); } -static int init_vsys(void) -{ -#ifdef __x86_64__ - int nerrs = 0; - FILE *maps; - char line[MAPS_LINE_LEN]; - bool found = false; - - maps = fopen("/proc/self/maps", "r"); - if (!maps) { - printf("[WARN]\tCould not open /proc/self/maps -- assuming vsyscall is r-x\n"); - vsyscall_map_r = true; - return 0; - } - - while (fgets(line, MAPS_LINE_LEN, maps)) { - char r, x; - void *start, *end; - char name[MAPS_LINE_LEN]; - - /* sscanf() is safe here as strlen(name) >= strlen(line) */ - if (sscanf(line, "%p-%p %c-%cp %*x %*x:%*x %*u %s", - &start, &end, &r, &x, name) != 5) - continue; - - if (strcmp(name, "[vsyscall]")) - continue; - - printf("\tvsyscall map: %s", line); - - if (start != (void *)0xffffffffff600000 || - end != (void *)0xffffffffff601000) { - printf("[FAIL]\taddress range is nonsense\n"); - nerrs++; - } - - printf("\tvsyscall permissions are %c-%c\n", r, x); - vsyscall_map_r = (r == 'r'); - vsyscall_map_x = (x == 'x'); - - found = true; - break; - } - - fclose(maps); - - if (!found) { - printf("\tno vsyscall map in /proc/self/maps\n"); - vsyscall_map_r = false; - vsyscall_map_x = false; - } - - return nerrs; -#else - return 0; -#endif -} - /* syscalls */ static inline long sys_gtod(struct timeval *tv, struct timezone *tz) { @@ -176,17 +107,6 @@ static inline long sys_getcpu(unsigned * cpu, unsigned * node, return syscall(SYS_getcpu, cpu, node, cache); } -static jmp_buf jmpbuf; -static volatile unsigned long segv_err; - -static void sigsegv(int sig, siginfo_t *info, void *ctx_void) -{ - ucontext_t *ctx = (ucontext_t *)ctx_void; - - segv_err = ctx->uc_mcontext.gregs[REG_ERR]; - siglongjmp(jmpbuf, 1); -} - static double tv_diff(const struct timeval *a, const struct timeval *b) { return (double)(a->tv_sec - b->tv_sec) + @@ -396,9 +316,33 @@ static int test_getcpu(int cpu) return nerrs; } +#ifdef __x86_64__ + +static jmp_buf jmpbuf; +static volatile unsigned long segv_err; + +static void sethandler(int sig, void (*handler)(int, siginfo_t *, void *), + int flags) +{ + struct sigaction sa; + memset(&sa, 0, sizeof(sa)); + sa.sa_sigaction = handler; + sa.sa_flags = SA_SIGINFO | flags; + sigemptyset(&sa.sa_mask); + if (sigaction(sig, &sa, 0)) + err(1, "sigaction"); +} + +static void sigsegv(int sig, siginfo_t *info, void *ctx_void) +{ + ucontext_t *ctx = (ucontext_t *)ctx_void; + + segv_err = ctx->uc_mcontext.gregs[REG_ERR]; + siglongjmp(jmpbuf, 1); +} + static int test_vsys_r(void) { -#ifdef __x86_64__ printf("[RUN]\tChecking read access to the vsyscall page\n"); bool can_read; if (sigsetjmp(jmpbuf, 1) == 0) { @@ -420,14 +364,12 @@ static int test_vsys_r(void) printf("[OK]\tWe do not have read access: #PF(0x%lx)\n", segv_err); } -#endif return 0; } static int test_vsys_x(void) { -#ifdef __x86_64__ if (vsyscall_map_x) { /* We already tested this adequately. */ return 0; @@ -454,8 +396,6 @@ static int test_vsys_x(void) segv_err); return 1; } -#endif - return 0; } @@ -472,7 +412,6 @@ static int test_vsys_x(void) */ static int test_process_vm_readv(void) { -#ifdef __x86_64__ char buf[4096]; struct iovec local, remote; int ret; @@ -504,12 +443,63 @@ static int test_process_vm_readv(void) printf("[FAIL]\tprocess_rm_readv() succeeded, but it should have failed in this configuration\n"); return 1; } -#endif - return 0; } -#ifdef __x86_64__ +static int init_vsys(void) +{ + int nerrs = 0; + FILE *maps; + char line[MAPS_LINE_LEN]; + bool found = false; + + maps = fopen("/proc/self/maps", "r"); + if (!maps) { + printf("[WARN]\tCould not open /proc/self/maps -- assuming vsyscall is r-x\n"); + vsyscall_map_r = true; + return 0; + } + + while (fgets(line, MAPS_LINE_LEN, maps)) { + char r, x; + void *start, *end; + char name[MAPS_LINE_LEN]; + + /* sscanf() is safe here as strlen(name) >= strlen(line) */ + if (sscanf(line, "%p-%p %c-%cp %*x %*x:%*x %*u %s", + &start, &end, &r, &x, name) != 5) + continue; + + if (strcmp(name, "[vsyscall]")) + continue; + + printf("\tvsyscall map: %s", line); + + if (start != (void *)0xffffffffff600000 || + end != (void *)0xffffffffff601000) { + printf("[FAIL]\taddress range is nonsense\n"); + nerrs++; + } + + printf("\tvsyscall permissions are %c-%c\n", r, x); + vsyscall_map_r = (r == 'r'); + vsyscall_map_x = (x == 'x'); + + found = true; + break; + } + + fclose(maps); + + if (!found) { + printf("\tno vsyscall map in /proc/self/maps\n"); + vsyscall_map_r = false; + vsyscall_map_x = false; + } + + return nerrs; +} + static volatile sig_atomic_t num_vsyscall_traps; static void sigtrap(int sig, siginfo_t *info, void *ctx_void) @@ -559,20 +549,20 @@ int main(int argc, char **argv) int nerrs = 0; init_vdso(); +#ifdef __x86_64__ nerrs += init_vsys(); +#endif nerrs += test_gtod(); nerrs += test_time(); nerrs += test_getcpu(0); nerrs += test_getcpu(1); +#ifdef __x86_64__ sethandler(SIGSEGV, sigsegv, 0); nerrs += test_vsys_r(); nerrs += test_vsys_x(); - nerrs += test_process_vm_readv(); - -#ifdef __x86_64__ nerrs += test_emulation(); #endif -- 2.39.2

9 months

2
3
0 0

[PATCH] kunit: configs: Enable CONFIG_DAMON_DBGFS_DEPRECATED for --alltests

by David Gow

This is required, as CONFIG_DAMON_DEBUGFS is enabled, and --alltests UML builds will fail due to the missing config option otherwise. Fixes: f4cba4bf6777 ("mm/damon: rename CONFIG_DAMON_DBGFS to DAMON_DBGFS_DEPRECATED") Signed-off-by: David Gow <davidgow(a)google.com> --- This is breaking all UML alltests builds, so we'd like to fix it sooner rather than later. SeongJae, would you rather take this yourself, or can we push it alongside any other KUnit fixes? Johannes: Does this conflict with the CONFIG_NETDEVICES / CONFIG_WLAN fixes to all_tests.config? I'd assume not, but I'm happy to take them via KUnit if you'd prefer anyway. Thanks, -- David --- tools/testing/kunit/configs/all_tests.config | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/kunit/configs/all_tests.config b/tools/testing/kunit/configs/all_tests.config index aa5ec149f96c..f388742cf266 100644 --- a/tools/testing/kunit/configs/all_tests.config +++ b/tools/testing/kunit/configs/all_tests.config @@ -38,6 +38,7 @@ CONFIG_DAMON_VADDR=y CONFIG_DAMON_PADDR=y CONFIG_DEBUG_FS=y CONFIG_DAMON_DBGFS=y +CONFIG_DAMON_DBGFS_DEPRECATED=y CONFIG_REGMAP_BUILD=y -- 2.44.0.396.g6e790dbe36-goog

9 months

4
3
0 0

[PATCH] selftests/exec: execveat: Improve debug reporting

by Kees Cook

Children processes were reporting their status, duplicating the parent's. Remove that, and add some additional details about the test execution. Signed-off-by: Kees Cook <keescook(a)chromium.org> --- Cc: Eric Biederman <ebiederm(a)xmission.com> Cc: Shuah Khan <shuah(a)kernel.org> Cc: Mark Brown <broonie(a)kernel.org> Cc: Muhammad Usama Anjum <usama.anjum(a)collabora.com> Cc: linux-mm(a)kvack.org Cc: linux-kselftest(a)vger.kernel.org --- tools/testing/selftests/exec/execveat.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/tools/testing/selftests/exec/execveat.c b/tools/testing/selftests/exec/execveat.c index 0546ca24f2b2..6418ded40bdd 100644 --- a/tools/testing/selftests/exec/execveat.c +++ b/tools/testing/selftests/exec/execveat.c @@ -98,10 +98,9 @@ static int check_execveat_invoked_rc(int fd, const char *path, int flags, if (child == 0) { /* Child: do execveat(). */ rc = execveat_(fd, path, argv, envp, flags); - ksft_print_msg("execveat() failed, rc=%d errno=%d (%s)\n", + ksft_print_msg("child execveat() failed, rc=%d errno=%d (%s)\n", rc, errno, strerror(errno)); - ksft_test_result_fail("%s\n", test_name); - exit(1); /* should not reach here */ + exit(errno); } /* Parent: wait for & check child's exit status. */ rc = waitpid(child, &status, 0); @@ -226,11 +225,14 @@ static int check_execveat_pathmax(int root_dfd, const char *src, int is_script) * "If the command name is found, but it is not an executable utility, * the exit status shall be 126."), so allow either. */ - if (is_script) + if (is_script) { + ksft_print_msg("Invoke script via root_dfd and relative filename\n"); fail += check_execveat_invoked_rc(root_dfd, longpath + 1, 0, 127, 126); - else + } else { + ksft_print_msg("Invoke exec via root_dfd and relative filename\n"); fail += check_execveat(root_dfd, longpath + 1, 0); + } return fail; } -- 2.34.1

9 months

3
4
0 0

[PATCH v2] selftests: x86: skip the tests if prerequisites aren't fulfilled

by Muhammad Usama Anjum

Skip instead of failing when prerequisite conditions aren't fulfilled, such as invalid xstate values etc. This patch would make the tests show as skip when run by: make -C tools/testing/selftests/ TARGETS=x86 run_tests ... # timeout set to 45 # selftests: x86: amx_64 # # xstate cpuid: invalid tile data size/offset: 0/0 ok 42 selftests: x86: amx_64 # SKIP # timeout set to 45 # selftests: x86: lam_64 # # Unsupported LAM feature! ok 43 selftests: x86: lam_64 # SKIP ... Cc: Chang S. Bae <chang.seok.bae(a)intel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov(a)linux.intel.com> Reviewed-by: Binbin Wu <binbin.wu(a)linux.intel.com> Signed-off-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> --- Changes since v1: - Use arch_prctl to check if amx is supported --- tools/testing/selftests/x86/amx.c | 27 ++++++++++----------------- tools/testing/selftests/x86/lam.c | 2 +- 2 files changed, 11 insertions(+), 18 deletions(-) diff --git a/tools/testing/selftests/x86/amx.c b/tools/testing/selftests/x86/amx.c index d884fd69dd510..95aad6d8849be 100644 --- a/tools/testing/selftests/x86/amx.c +++ b/tools/testing/selftests/x86/amx.c @@ -103,21 +103,6 @@ static void clearhandler(int sig) #define CPUID_LEAF1_ECX_XSAVE_MASK (1 << 26) #define CPUID_LEAF1_ECX_OSXSAVE_MASK (1 << 27) -static inline void check_cpuid_xsave(void) -{ - uint32_t eax, ebx, ecx, edx; - - /* - * CPUID.1:ECX.XSAVE[bit 26] enumerates general - * support for the XSAVE feature set, including - * XGETBV. - */ - __cpuid_count(1, 0, eax, ebx, ecx, edx); - if (!(ecx & CPUID_LEAF1_ECX_XSAVE_MASK)) - fatal_error("cpuid: no CPU xsave support"); - if (!(ecx & CPUID_LEAF1_ECX_OSXSAVE_MASK)) - fatal_error("cpuid: no OS xsave support"); -} static uint32_t xbuf_size; @@ -350,6 +335,7 @@ enum expected_result { FAIL_EXPECTED, SUCCESS_EXPECTED }; /* arch_prctl() and sigaltstack() test */ +#define ARCH_GET_XCOMP_SUPP 0x1021 #define ARCH_GET_XCOMP_PERM 0x1022 #define ARCH_REQ_XCOMP_PERM 0x1023 @@ -928,8 +914,15 @@ static void test_ptrace(void) int main(void) { - /* Check hardware availability at first */ - check_cpuid_xsave(); + unsigned long features; + long rc; + + rc = syscall(SYS_arch_prctl, ARCH_GET_XCOMP_SUPP, &features); + if (rc || (features & XFEATURE_MASK_XTILE) != XFEATURE_MASK_XTILE) { + ksft_print_msg("no AMX support\n"); + return KSFT_SKIP; + } + check_cpuid_xtiledata(); init_stashed_xsave(); diff --git a/tools/testing/selftests/x86/lam.c b/tools/testing/selftests/x86/lam.c index 215b8150b7cca..c0f016f45ee17 100644 --- a/tools/testing/selftests/x86/lam.c +++ b/tools/testing/selftests/x86/lam.c @@ -1183,7 +1183,7 @@ int main(int argc, char **argv) if (!cpu_has_lam()) { ksft_print_msg("Unsupported LAM feature!\n"); - return -1; + return KSFT_SKIP; } while ((c = getopt(argc, argv, "ht:")) != -1) { -- 2.39.2

9 months

3
4
0 0

[PATCH 1/2] selftests: x86: test_vsyscall: conform test to TAP format output

by Muhammad Usama Anjum

Conform the layout, informational and status messages to TAP. No functional change is intended other than the layout of output messages. Without using TAP messages, the passed/failed/skip test names cannot be found. Signed-off-by: Muhammad Usama Anjum <usama.anjum(a)collabora.com> --- tools/testing/selftests/x86/test_vsyscall.c | 506 +++++++++----------- 1 file changed, 238 insertions(+), 268 deletions(-) diff --git a/tools/testing/selftests/x86/test_vsyscall.c b/tools/testing/selftests/x86/test_vsyscall.c index 47cab972807c4..d4c8e8d79d389 100644 --- a/tools/testing/selftests/x86/test_vsyscall.c +++ b/tools/testing/selftests/x86/test_vsyscall.c @@ -21,6 +21,13 @@ #include <sys/uio.h> #include "helpers.h" +#include "../kselftest.h" + +#ifdef __x86_64__ +#define TOTAL_TESTS 13 +#else +#define TOTAL_TESTS 8 +#endif #ifdef __x86_64__ # define VSYS(x) (x) @@ -39,18 +46,6 @@ /* max length of lines in /proc/self/maps - anything longer is skipped here */ #define MAPS_LINE_LEN 128 -static void sethandler(int sig, void (*handler)(int, siginfo_t *, void *), - int flags) -{ - struct sigaction sa; - memset(&sa, 0, sizeof(sa)); - sa.sa_sigaction = handler; - sa.sa_flags = SA_SIGINFO | flags; - sigemptyset(&sa.sa_mask); - if (sigaction(sig, &sa, 0)) - err(1, "sigaction"); -} - /* vsyscalls and vDSO */ bool vsyscall_map_r = false, vsyscall_map_x = false; @@ -75,83 +70,25 @@ static void init_vdso(void) if (!vdso) vdso = dlopen("linux-gate.so.1", RTLD_LAZY | RTLD_LOCAL | RTLD_NOLOAD); if (!vdso) { - printf("[WARN]\tfailed to find vDSO\n"); + ksft_print_msg("[WARN] failed to find vDSO\n"); return; } vdso_gtod = (gtod_t)dlsym(vdso, "__vdso_gettimeofday"); if (!vdso_gtod) - printf("[WARN]\tfailed to find gettimeofday in vDSO\n"); + ksft_print_msg("[WARN] failed to find gettimeofday in vDSO\n"); vdso_gettime = (vgettime_t)dlsym(vdso, "__vdso_clock_gettime"); if (!vdso_gettime) - printf("[WARN]\tfailed to find clock_gettime in vDSO\n"); + ksft_print_msg("[WARN] failed to find clock_gettime in vDSO\n"); vdso_time = (time_func_t)dlsym(vdso, "__vdso_time"); if (!vdso_time) - printf("[WARN]\tfailed to find time in vDSO\n"); + ksft_print_msg("[WARN] failed to find time in vDSO\n"); vdso_getcpu = (getcpu_t)dlsym(vdso, "__vdso_getcpu"); if (!vdso_getcpu) - printf("[WARN]\tfailed to find getcpu in vDSO\n"); -} - -static int init_vsys(void) -{ -#ifdef __x86_64__ - int nerrs = 0; - FILE *maps; - char line[MAPS_LINE_LEN]; - bool found = false; - - maps = fopen("/proc/self/maps", "r"); - if (!maps) { - printf("[WARN]\tCould not open /proc/self/maps -- assuming vsyscall is r-x\n"); - vsyscall_map_r = true; - return 0; - } - - while (fgets(line, MAPS_LINE_LEN, maps)) { - char r, x; - void *start, *end; - char name[MAPS_LINE_LEN]; - - /* sscanf() is safe here as strlen(name) >= strlen(line) */ - if (sscanf(line, "%p-%p %c-%cp %*x %*x:%*x %*u %s", - &start, &end, &r, &x, name) != 5) - continue; - - if (strcmp(name, "[vsyscall]")) - continue; - - printf("\tvsyscall map: %s", line); - - if (start != (void *)0xffffffffff600000 || - end != (void *)0xffffffffff601000) { - printf("[FAIL]\taddress range is nonsense\n"); - nerrs++; - } - - printf("\tvsyscall permissions are %c-%c\n", r, x); - vsyscall_map_r = (r == 'r'); - vsyscall_map_x = (x == 'x'); - - found = true; - break; - } - - fclose(maps); - - if (!found) { - printf("\tno vsyscall map in /proc/self/maps\n"); - vsyscall_map_r = false; - vsyscall_map_x = false; - } - - return nerrs; -#else - return 0; -#endif + ksft_print_msg("[WARN] failed to find getcpu in vDSO\n"); } /* syscalls */ @@ -176,98 +113,76 @@ static inline long sys_getcpu(unsigned * cpu, unsigned * node, return syscall(SYS_getcpu, cpu, node, cache); } -static jmp_buf jmpbuf; -static volatile unsigned long segv_err; - -static void sigsegv(int sig, siginfo_t *info, void *ctx_void) -{ - ucontext_t *ctx = (ucontext_t *)ctx_void; - - segv_err = ctx->uc_mcontext.gregs[REG_ERR]; - siglongjmp(jmpbuf, 1); -} - static double tv_diff(const struct timeval *a, const struct timeval *b) { return (double)(a->tv_sec - b->tv_sec) + (double)((int)a->tv_usec - (int)b->tv_usec) * 1e-6; } -static int check_gtod(const struct timeval *tv_sys1, - const struct timeval *tv_sys2, - const struct timezone *tz_sys, - const char *which, - const struct timeval *tv_other, - const struct timezone *tz_other) +static void check_gtod(const struct timeval *tv_sys1, + const struct timeval *tv_sys2, + const struct timezone *tz_sys, + const char *which, + const struct timeval *tv_other, + const struct timezone *tz_other) { - int nerrs = 0; double d1, d2; - if (tz_other && (tz_sys->tz_minuteswest != tz_other->tz_minuteswest || tz_sys->tz_dsttime != tz_other->tz_dsttime)) { - printf("[FAIL] %s tz mismatch\n", which); - nerrs++; - } + if (tz_other && (tz_sys->tz_minuteswest != tz_other->tz_minuteswest || + tz_sys->tz_dsttime != tz_other->tz_dsttime)) + ksft_print_msg("%s tz mismatch\n", which); d1 = tv_diff(tv_other, tv_sys1); d2 = tv_diff(tv_sys2, tv_other); - printf("\t%s time offsets: %lf %lf\n", which, d1, d2); - if (d1 < 0 || d2 < 0) { - printf("[FAIL]\t%s time was inconsistent with the syscall\n", which); - nerrs++; - } else { - printf("[OK]\t%s gettimeofday()'s timeval was okay\n", which); - } + ksft_print_msg("%s time offsets: %lf %lf\n", which, d1, d2); - return nerrs; + ksft_test_result(!(d1 < 0 || d2 < 0), "%s gettimeofday()'s timeval\n", which); } -static int test_gtod(void) +static void test_gtod(void) { struct timeval tv_sys1, tv_sys2, tv_vdso, tv_vsys; struct timezone tz_sys, tz_vdso, tz_vsys; long ret_vdso = -1; long ret_vsys = -1; - int nerrs = 0; - printf("[RUN]\ttest gettimeofday()\n"); + ksft_print_msg("test gettimeofday()\n"); if (sys_gtod(&tv_sys1, &tz_sys) != 0) - err(1, "syscall gettimeofday"); + ksft_exit_fail_msg("syscall gettimeofday: %s\n", strerror(errno)); if (vdso_gtod) ret_vdso = vdso_gtod(&tv_vdso, &tz_vdso); if (vsyscall_map_x) ret_vsys = vgtod(&tv_vsys, &tz_vsys); if (sys_gtod(&tv_sys2, &tz_sys) != 0) - err(1, "syscall gettimeofday"); + ksft_exit_fail_msg("syscall gettimeofday: %s\n", strerror(errno)); if (vdso_gtod) { - if (ret_vdso == 0) { - nerrs += check_gtod(&tv_sys1, &tv_sys2, &tz_sys, "vDSO", &tv_vdso, &tz_vdso); - } else { - printf("[FAIL]\tvDSO gettimeofday() failed: %ld\n", ret_vdso); - nerrs++; - } + if (ret_vdso == 0) + check_gtod(&tv_sys1, &tv_sys2, &tz_sys, "vDSO", &tv_vdso, &tz_vdso); + else + ksft_test_result_fail("vDSO gettimeofday() failed: %ld\n", ret_vdso); + } else { + ksft_test_result_skip("vdso_gtod isn't set\n"); } if (vsyscall_map_x) { - if (ret_vsys == 0) { - nerrs += check_gtod(&tv_sys1, &tv_sys2, &tz_sys, "vsyscall", &tv_vsys, &tz_vsys); - } else { - printf("[FAIL]\tvsys gettimeofday() failed: %ld\n", ret_vsys); - nerrs++; - } + if (ret_vsys == 0) + check_gtod(&tv_sys1, &tv_sys2, &tz_sys, "vsyscall", &tv_vsys, &tz_vsys); + else + ksft_test_result_fail("vsys gettimeofday() failed: %ld\n", ret_vsys); + } else { + ksft_test_result_skip("vsyscall_map_x isn't set\n"); } - - return nerrs; } -static int test_time(void) { - int nerrs = 0; - - printf("[RUN]\ttest time()\n"); +static void test_time(void) +{ long t_sys1, t_sys2, t_vdso = 0, t_vsys = 0; long t2_sys1 = -1, t2_sys2 = -1, t2_vdso = -1, t2_vsys = -1; + + ksft_print_msg("test time()\n"); t_sys1 = sys_time(&t2_sys1); if (vdso_time) t_vdso = vdso_time(&t2_vdso); @@ -275,56 +190,60 @@ static int test_time(void) { t_vsys = vtime(&t2_vsys); t_sys2 = sys_time(&t2_sys2); if (t_sys1 < 0 || t_sys1 != t2_sys1 || t_sys2 < 0 || t_sys2 != t2_sys2) { - printf("[FAIL]\tsyscall failed (ret1:%ld output1:%ld ret2:%ld output2:%ld)\n", t_sys1, t2_sys1, t_sys2, t2_sys2); - nerrs++; - return nerrs; + ksft_print_msg("syscall failed (ret1:%ld output1:%ld ret2:%ld output2:%ld)\n", + t_sys1, t2_sys1, t_sys2, t2_sys2); + ksft_test_result_skip("vdso_time\n"); + ksft_test_result_skip("vdso_time\n"); + return; } if (vdso_time) { - if (t_vdso < 0 || t_vdso != t2_vdso) { - printf("[FAIL]\tvDSO failed (ret:%ld output:%ld)\n", t_vdso, t2_vdso); - nerrs++; - } else if (t_vdso < t_sys1 || t_vdso > t_sys2) { - printf("[FAIL]\tvDSO returned the wrong time (%ld %ld %ld)\n", t_sys1, t_vdso, t_sys2); - nerrs++; - } else { - printf("[OK]\tvDSO time() is okay\n"); - } + if (t_vdso < 0 || t_vdso != t2_vdso) + ksft_test_result_fail("vDSO failed (ret:%ld output:%ld)\n", + t_vdso, t2_vdso); + else if (t_vdso < t_sys1 || t_vdso > t_sys2) + ksft_test_result_fail("vDSO returned the wrong time (%ld %ld %ld)\n", + t_sys1, t_vdso, t_sys2); + else + ksft_test_result_pass("vDSO time() is okay\n"); + } else { + ksft_test_result_skip("vdso_time isn't set\n"); } if (vsyscall_map_x) { - if (t_vsys < 0 || t_vsys != t2_vsys) { - printf("[FAIL]\tvsyscall failed (ret:%ld output:%ld)\n", t_vsys, t2_vsys); - nerrs++; - } else if (t_vsys < t_sys1 || t_vsys > t_sys2) { - printf("[FAIL]\tvsyscall returned the wrong time (%ld %ld %ld)\n", t_sys1, t_vsys, t_sys2); - nerrs++; - } else { - printf("[OK]\tvsyscall time() is okay\n"); - } + if (t_vsys < 0 || t_vsys != t2_vsys) + ksft_test_result_fail("vsyscall failed (ret:%ld output:%ld)\n", + t_vsys, t2_vsys); + else if (t_vsys < t_sys1 || t_vsys > t_sys2) + ksft_test_result_fail("vsyscall returned the wrong time (%ld %ld %ld)\n", + t_sys1, t_vsys, t_sys2); + else + ksft_test_result_pass("vsyscall time() is okay\n"); + } else { + ksft_test_result_skip("vsyscall_map_x isn't set\n"); } - - return nerrs; } -static int test_getcpu(int cpu) +static void test_getcpu(int cpu) { - int nerrs = 0; + unsigned int cpu_sys, cpu_vdso, cpu_vsys, node_sys, node_vdso, node_vsys; long ret_sys, ret_vdso = -1, ret_vsys = -1; + unsigned int node = 0; + bool have_node = false; + cpu_set_t cpuset; - printf("[RUN]\tgetcpu() on CPU %d\n", cpu); + ksft_print_msg("getcpu() on CPU %d\n", cpu); - cpu_set_t cpuset; CPU_ZERO(&cpuset); CPU_SET(cpu, &cpuset); if (sched_setaffinity(0, sizeof(cpuset), &cpuset) != 0) { - printf("[SKIP]\tfailed to force CPU %d\n", cpu); - return nerrs; + ksft_print_msg("failed to force CPU %d\n", cpu); + ksft_test_result_skip("vdso_getcpu\n"); + ksft_test_result_skip("vsyscall_map_x\n"); + + return; } - unsigned cpu_sys, cpu_vdso, cpu_vsys, node_sys, node_vdso, node_vsys; - unsigned node = 0; - bool have_node = false; ret_sys = sys_getcpu(&cpu_sys, &node_sys, 0); if (vdso_getcpu) ret_vdso = vdso_getcpu(&cpu_vdso, &node_vdso, 0); @@ -332,10 +251,9 @@ static int test_getcpu(int cpu) ret_vsys = vgetcpu(&cpu_vsys, &node_vsys, 0); if (ret_sys == 0) { - if (cpu_sys != cpu) { - printf("[FAIL]\tsyscall reported CPU %hu but should be %d\n", cpu_sys, cpu); - nerrs++; - } + if (cpu_sys != cpu) + ksft_print_msg("syscall reported CPU %hu but should be %d\n", + cpu_sys, cpu); have_node = true; node = node_sys; @@ -343,63 +261,84 @@ static int test_getcpu(int cpu) if (vdso_getcpu) { if (ret_vdso) { - printf("[FAIL]\tvDSO getcpu() failed\n"); - nerrs++; + ksft_test_result_fail("vDSO getcpu() failed\n"); } else { if (!have_node) { have_node = true; node = node_vdso; } - if (cpu_vdso != cpu) { - printf("[FAIL]\tvDSO reported CPU %hu but should be %d\n", cpu_vdso, cpu); - nerrs++; - } else { - printf("[OK]\tvDSO reported correct CPU\n"); - } - - if (node_vdso != node) { - printf("[FAIL]\tvDSO reported node %hu but should be %hu\n", node_vdso, node); - nerrs++; + if (cpu_vdso != cpu || node_vdso != node) { + if (cpu_vdso != cpu) + ksft_print_msg("vDSO reported CPU %hu but should be %d\n", + cpu_vdso, cpu); + if (node_vdso != node) + ksft_print_msg("vDSO reported node %hu but should be %hu\n", + node_vdso, node); + ksft_test_result_fail("Wrong values\n"); } else { - printf("[OK]\tvDSO reported correct node\n"); + ksft_test_result_pass("vDSO reported correct CPU and node\n"); } } + } else { + ksft_test_result_skip("vdso_getcpu isn't set\n"); } if (vsyscall_map_x) { if (ret_vsys) { - printf("[FAIL]\tvsyscall getcpu() failed\n"); - nerrs++; + ksft_test_result_fail("vsyscall getcpu() failed\n"); } else { if (!have_node) { have_node = true; node = node_vsys; } - if (cpu_vsys != cpu) { - printf("[FAIL]\tvsyscall reported CPU %hu but should be %d\n", cpu_vsys, cpu); - nerrs++; + if (cpu_vsys != cpu || node_vsys != node) { + if (cpu_vsys != cpu) + ksft_print_msg("vsyscall reported CPU %hu but should be %d\n", + cpu_vsys, cpu); + if (node_vsys != node) + ksft_print_msg("vsyscall reported node %hu but should be %hu\n", + node_vsys, node); + ksft_test_result_fail("Wrong values\n"); } else { - printf("[OK]\tvsyscall reported correct CPU\n"); - } - - if (node_vsys != node) { - printf("[FAIL]\tvsyscall reported node %hu but should be %hu\n", node_vsys, node); - nerrs++; - } else { - printf("[OK]\tvsyscall reported correct node\n"); + ksft_test_result_pass("vsyscall reported correct CPU and node\n"); } } + } else { + ksft_test_result_skip("vsyscall_map_x isn't set\n"); } +} + +#ifdef __x86_64__ + +static jmp_buf jmpbuf; +static volatile unsigned long segv_err; + +static void sethandler(int sig, void (*handler)(int, siginfo_t *, void *), + int flags) +{ + struct sigaction sa; - return nerrs; + memset(&sa, 0, sizeof(sa)); + sa.sa_sigaction = handler; + sa.sa_flags = SA_SIGINFO | flags; + sigemptyset(&sa.sa_mask); + if (sigaction(sig, &sa, 0)) + ksft_exit_fail_msg("sigaction failed\n"); } -static int test_vsys_r(void) +static void sigsegv(int sig, siginfo_t *info, void *ctx_void) { -#ifdef __x86_64__ - printf("[RUN]\tChecking read access to the vsyscall page\n"); + ucontext_t *ctx = (ucontext_t *)ctx_void; + + segv_err = ctx->uc_mcontext.gregs[REG_ERR]; + siglongjmp(jmpbuf, 1); +} + +static void test_vsys_r(void) +{ + ksft_print_msg("Checking read access to the vsyscall page\n"); bool can_read; if (sigsetjmp(jmpbuf, 1) == 0) { *(volatile int *)0xffffffffff600000; @@ -408,32 +347,25 @@ static int test_vsys_r(void) can_read = false; } - if (can_read && !vsyscall_map_r) { - printf("[FAIL]\tWe have read access, but we shouldn't\n"); - return 1; - } else if (!can_read && vsyscall_map_r) { - printf("[FAIL]\tWe don't have read access, but we should\n"); - return 1; - } else if (can_read) { - printf("[OK]\tWe have read access\n"); - } else { - printf("[OK]\tWe do not have read access: #PF(0x%lx)\n", - segv_err); - } -#endif - - return 0; + if (can_read && !vsyscall_map_r) + ksft_test_result_fail("We have read access, but we shouldn't\n"); + else if (!can_read && vsyscall_map_r) + ksft_test_result_fail("We don't have read access, but we should\n"); + else if (can_read) + ksft_test_result_pass("We have read access\n"); + else + ksft_test_result_pass("We do not have read access: #PF(0x%lx)\n", segv_err); } -static int test_vsys_x(void) +static void test_vsys_x(void) { -#ifdef __x86_64__ if (vsyscall_map_x) { /* We already tested this adequately. */ - return 0; + ksft_test_result_pass("vsyscall_map_x is true\n"); + return; } - printf("[RUN]\tMake sure that vsyscalls really page fault\n"); + ksft_print_msg("Make sure that vsyscalls really page fault\n"); bool can_exec; if (sigsetjmp(jmpbuf, 1) == 0) { @@ -443,20 +375,14 @@ static int test_vsys_x(void) can_exec = false; } - if (can_exec) { - printf("[FAIL]\tExecuting the vsyscall did not page fault\n"); - return 1; - } else if (segv_err & (1 << 4)) { /* INSTR */ - printf("[OK]\tExecuting the vsyscall page failed: #PF(0x%lx)\n", - segv_err); - } else { - printf("[FAIL]\tExecution failed with the wrong error: #PF(0x%lx)\n", - segv_err); - return 1; - } -#endif - - return 0; + if (can_exec) + ksft_test_result_fail("Executing the vsyscall did not page fault\n"); + else if (segv_err & (1 << 4)) /* INSTR */ + ksft_test_result_pass("Executing the vsyscall page failed: #PF(0x%lx)\n", + segv_err); + else + ksft_test_result_fail("Execution failed with the wrong error: #PF(0x%lx)\n", + segv_err); } /* @@ -470,14 +396,13 @@ static int test_vsys_x(void) * fact that ptrace() ever worked was a nice courtesy of old kernels, * but the code to support it is fairly gross. */ -static int test_process_vm_readv(void) +static void test_process_vm_readv(void) { -#ifdef __x86_64__ char buf[4096]; struct iovec local, remote; int ret; - printf("[RUN]\tprocess_vm_readv() from vsyscall page\n"); + ksft_print_msg("process_vm_readv() from vsyscall page\n"); local.iov_base = buf; local.iov_len = 4096; @@ -489,27 +414,71 @@ static int test_process_vm_readv(void) * We expect process_vm_readv() to work if and only if the * vsyscall page is readable. */ - printf("[%s]\tprocess_vm_readv() failed (ret = %d, errno = %d)\n", vsyscall_map_r ? "FAIL" : "OK", ret, errno); - return vsyscall_map_r ? 1 : 0; + ksft_test_result(!vsyscall_map_r, + "process_vm_readv() failed (ret = %d, errno = %d)\n", ret, errno); + return; } - if (vsyscall_map_r) { - if (!memcmp(buf, remote.iov_base, sizeof(buf))) { - printf("[OK]\tIt worked and read correct data\n"); - } else { - printf("[FAIL]\tIt worked but returned incorrect data\n"); - return 1; + if (vsyscall_map_r) + ksft_test_result(!memcmp(buf, remote.iov_base, sizeof(buf)), "Read data\n"); + else + ksft_test_result_fail("process_rm_readv() succeeded, but it should have failed in this configuration\n"); +} + +static void init_vsys(void) +{ + int nerrs = 0; + FILE *maps; + char line[MAPS_LINE_LEN]; + bool found = false; + + maps = fopen("/proc/self/maps", "r"); + if (!maps) { + ksft_test_result_skip("Could not open /proc/self/maps -- assuming vsyscall is r-x\n"); + vsyscall_map_r = true; + return; + } + + while (fgets(line, MAPS_LINE_LEN, maps)) { + char r, x; + void *start, *end; + char name[MAPS_LINE_LEN]; + + /* sscanf() is safe here as strlen(name) >= strlen(line) */ + if (sscanf(line, "%p-%p %c-%cp %*x %*x:%*x %*u %s", + &start, &end, &r, &x, name) != 5) + continue; + + if (strcmp(name, "[vsyscall]")) + continue; + + ksft_print_msg("vsyscall map: %s", line); + + if (start != (void *)0xffffffffff600000 || + end != (void *)0xffffffffff601000) { + ksft_print_msg("address range is nonsense\n"); + nerrs++; } - } else { - printf("[FAIL]\tprocess_rm_readv() succeeded, but it should have failed in this configuration\n"); - return 1; + + ksft_print_msg("vsyscall permissions are %c-%c\n", r, x); + vsyscall_map_r = (r == 'r'); + vsyscall_map_x = (x == 'x'); + + found = true; + break; } -#endif - return 0; + fclose(maps); + + if (!found) { + ksft_print_msg("no vsyscall map in /proc/self/maps\n"); + vsyscall_map_r = false; + vsyscall_map_x = false; + } + + ksft_test_result(!nerrs, "vsyscall map\n"); } -#ifdef __x86_64__ static volatile sig_atomic_t num_vsyscall_traps; static void sigtrap(int sig, siginfo_t *info, void *ctx_void) @@ -521,15 +490,17 @@ static void sigtrap(int sig, siginfo_t *info, void *ctx_void) num_vsyscall_traps++; } -static int test_emulation(void) +static void test_emulation(void) { time_t tmp; bool is_native; - if (!vsyscall_map_x) - return 0; + if (!vsyscall_map_x) { + ksft_test_result_skip("vsyscall_map_x isn't set\n"); + return; + } - printf("[RUN]\tchecking that vsyscalls are emulated\n"); + ksft_print_msg("checking that vsyscalls are emulated\n"); sethandler(SIGTRAP, sigtrap, 0); set_eflags(get_eflags() | X86_EFLAGS_TF); vtime(&tmp); @@ -545,36 +516,35 @@ static int test_emulation(void) */ is_native = (num_vsyscall_traps > 1); - printf("[%s]\tvsyscalls are %s (%d instructions in vsyscall page)\n", - (is_native ? "FAIL" : "OK"), - (is_native ? "native" : "emulated"), - (int)num_vsyscall_traps); - - return is_native; + ksft_test_result(!is_native, "vsyscalls are %s (%d instructions in vsyscall page)\n", + (is_native ? "native" : "emulated"), (int)num_vsyscall_traps); } #endif int main(int argc, char **argv) { - int nerrs = 0; + int total_tests = TOTAL_TESTS; - init_vdso(); - nerrs += init_vsys(); + ksft_print_header(); + ksft_set_plan(total_tests); - nerrs += test_gtod(); - nerrs += test_time(); - nerrs += test_getcpu(0); - nerrs += test_getcpu(1); - - sethandler(SIGSEGV, sigsegv, 0); - nerrs += test_vsys_r(); - nerrs += test_vsys_x(); + init_vdso(); +#ifdef __x86_64__ + init_vsys(); +#endif - nerrs += test_process_vm_readv(); + test_gtod(); + test_time(); + test_getcpu(0); + test_getcpu(1); #ifdef __x86_64__ - nerrs += test_emulation(); + sethandler(SIGSEGV, sigsegv, 0); + test_vsys_r(); + test_vsys_x(); + test_process_vm_readv(); + test_emulation(); #endif - return nerrs ? 1 : 0; + ksft_finished(); } -- 2.39.2

9 months

2
6
0 0

[PATCH net-next v4 0/4] net: gro: encapsulation bug fix and flush checks improvements

by Richard Gobert

This series fixes a bug in the complete phase of UDP in GRO, in which socket lookup fails due to using network_header when parsing encapsulated packets. The fix is to pass p_off parameter in *_gro_complete. Next, the fields network_offset and inner_network_offset are added to napi_gro_cb, and are both set during the receive phase of GRO. This is then leveraged in the next commit to remove flush_id state from napi_gro_cb, and stateful code in {ipv6,inet}_gro_receive which may be unnecessarily complicated due to encapsulation support in GRO. In addition, udpgro_fwd selftest is adjusted to include the socket lookup case for vxlan. This selftest will test its supposed functionality once local bind support is merged (https://lore.kernel.org/netdev/df300a49-7811-4126-a56a-a77100c8841b@gmail.c…). v3 -> v4: - Fix code comment and commit message typos - v3: https://lore.kernel.org/all/f939c84a-2322-4393-a5b0-9b1e0be8ed8e@gmail.com/ v2 -> v3: - Use napi_gro_cb instead of skb->{offset} - v2: https://lore.kernel.org/netdev/2ce1600b-e733-448b-91ac-9d0ae2b866a4@gmail.c… v1 -> v2: - Pass p_off in *_gro_complete to fix UDP bug - Remove more conditionals and memory fetches from inet_gro_flush - v1: https://lore.kernel.org/netdev/e1d22505-c5f8-4c02-a997-64248480338b@gmail.c… Richard Gobert (4): net: gro: add p_off param in *_gro_complete selftests/net: add local address bind in vxlan selftest net: gro: add {inner_}network_offset to napi_gro_cb net: gro: move L3 flush checks to tcp_gro_receive drivers/net/geneve.c | 7 +- drivers/net/vxlan/vxlan_core.c | 11 ++-- include/linux/etherdevice.h | 2 +- include/linux/netdevice.h | 3 +- include/linux/udp.h | 2 +- include/net/gro.h | 36 +++++++---- include/net/inet_common.h | 2 +- include/net/tcp.h | 6 +- include/net/udp.h | 8 +-- include/net/udp_tunnel.h | 2 +- net/8021q/vlan_core.c | 6 +- net/core/gro.c | 6 +- net/ethernet/eth.c | 5 +- net/ipv4/af_inet.c | 49 ++------------ net/ipv4/fou_core.c | 9 +-- net/ipv4/gre_offload.c | 6 +- net/ipv4/tcp_offload.c | 79 ++++++++++++++++++----- net/ipv4/udp.c | 3 +- net/ipv4/udp_offload.c | 26 ++++---- net/ipv6/ip6_offload.c | 41 +++++------- net/ipv6/tcpv6_offload.c | 7 +- net/ipv6/udp.c | 3 +- net/ipv6/udp_offload.c | 13 ++-- tools/testing/selftests/net/udpgro_fwd.sh | 10 ++- 24 files changed, 187 insertions(+), 155 deletions(-) -- 2.36.1

9 months

5
19
0 0

[PATCH][next] selftests/perf_events: Fix spelling mistake "sycnhronize" -> "synchronize"

by Colin Ian King

There is a spelling mistake in an error message. Fix it. Signed-off-by: Colin Ian King <colin.i.king(a)gmail.com> --- tools/testing/selftests/perf_events/watermark_signal.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/perf_events/watermark_signal.c b/tools/testing/selftests/perf_events/watermark_signal.c index 49dc1e831174..e03fe1b9bba2 100644 --- a/tools/testing/selftests/perf_events/watermark_signal.c +++ b/tools/testing/selftests/perf_events/watermark_signal.c @@ -75,7 +75,7 @@ TEST(watermark_signal) if (waitpid(child, &child_status, WSTOPPED) != child || !(WIFSTOPPED(child_status) && WSTOPSIG(child_status) == SIGSTOP)) { fprintf(stderr, - "failed to sycnhronize with child errno=%d status=%x\n", + "failed to synchronize with child errno=%d status=%x\n", errno, child_status); goto cleanup; -- 2.39.2

9 months

2
1
0 0

[PATCH net] selftests: netdevsim: set test timeout to 10 minutes

by Jakub Kicinski

The longest running netdevsim test, nexthop.sh, currently takes 5 min to finish. Around 260s to be exact, and 310s on a debug kernel. The default timeout in selftest is 45sec, so we need an explicit config. Give ourselves some headroom and use 10min. Commit under Fixes isn't really to "blame" but prior to that netdevsim tests weren't integrated with kselftest infra so blaming the tests themselves doesn't seem right, either. Fixes: 8ff25dac88f6 ("netdevsim: add Makefile for selftests") Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> --- CC: shuah(a)kernel.org CC: dw(a)davidwei.uk CC: linux-kselftest(a)vger.kernel.org --- tools/testing/selftests/drivers/net/netdevsim/settings | 1 + 1 file changed, 1 insertion(+) create mode 100644 tools/testing/selftests/drivers/net/netdevsim/settings diff --git a/tools/testing/selftests/drivers/net/netdevsim/settings b/tools/testing/selftests/drivers/net/netdevsim/settings new file mode 100644 index 000000000000..a62d2fa1275c --- /dev/null +++ b/tools/testing/selftests/drivers/net/netdevsim/settings @@ -0,0 +1 @@ +timeout=600 -- 2.44.0

9 months

3
2
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror March 2024