February 2024 - Linux-kselftest-mirror

[PATCH net-next] selftests: vxlan_mdb: Avoid duplicate test names

by Ido Schimmel

Rename some test cases to avoid overlapping test names which is problematic for the kernel test robot. No changes in the test's logic. Suggested-by: Yujie Liu <yujie.liu(a)intel.com> Signed-off-by: Ido Schimmel <idosch(a)nvidia.com> --- Yujie Liu, please verify this works for you. --- tools/testing/selftests/net/test_vxlan_mdb.sh | 36 +++++++++---------- 1 file changed, 18 insertions(+), 18 deletions(-) diff --git a/tools/testing/selftests/net/test_vxlan_mdb.sh b/tools/testing/selftests/net/test_vxlan_mdb.sh index 84a05a9e46d8..74ff9fb2a6f0 100755 --- a/tools/testing/selftests/net/test_vxlan_mdb.sh +++ b/tools/testing/selftests/net/test_vxlan_mdb.sh @@ -1014,10 +1014,10 @@ flush() run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 port vx0" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010" - log_test $? 254 "Flush by port" + log_test $? 254 "Flush by port - matching" run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 port veth0" - log_test $? 255 "Flush by wrong port" + log_test $? 255 "Flush by port - non-matching" # Check that when flushing by source VNI only entries programmed with # the specified source VNI are flushed and the rest are not. @@ -1030,9 +1030,9 @@ flush() run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 src_vni 10010" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010" - log_test $? 254 "Flush by specified source VNI" + log_test $? 254 "Flush by source VNI - matching" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10011" - log_test $? 0 "Flush by unspecified source VNI" + log_test $? 0 "Flush by source VNI - non-matching" run_cmd "bridge -n $ns1_v4 mdb flush dev vx0" @@ -1058,9 +1058,9 @@ flush() run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 proto bgp" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep \"proto bgp\"" - log_test $? 1 "Flush by specified routing protocol" + log_test $? 1 "Flush by routing protocol - matching" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep \"proto zebra\"" - log_test $? 0 "Flush by unspecified routing protocol" + log_test $? 0 "Flush by routing protocol - non-matching" run_cmd "bridge -n $ns1_v4 mdb flush dev vx0" @@ -1075,9 +1075,9 @@ flush() run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 dst 198.51.100.2" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.2" - log_test $? 1 "Flush by specified destination IP - IPv4" + log_test $? 1 "Flush by IPv4 destination IP - matching" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.1" - log_test $? 0 "Flush by unspecified destination IP - IPv4" + log_test $? 0 "Flush by IPv4 destination IP - non-matching" run_cmd "bridge -n $ns1_v4 mdb flush dev vx0" @@ -1089,9 +1089,9 @@ flush() run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 dst 2001:db8:1000::2" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 2001:db8:1000::2" - log_test $? 1 "Flush by specified destination IP - IPv6" + log_test $? 1 "Flush by IPv6 destination IP - matching" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 2001:db8:1000::1" - log_test $? 0 "Flush by unspecified destination IP - IPv6" + log_test $? 0 "Flush by IPv6 destination IP - non-matching" run_cmd "bridge -n $ns1_v4 mdb flush dev vx0" @@ -1104,9 +1104,9 @@ flush() run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 dst_port 11111" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep \"dst_port 11111\"" - log_test $? 1 "Flush by specified UDP destination port" + log_test $? 1 "Flush by UDP destination port - matching" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep \"dst_port 22222\"" - log_test $? 0 "Flush by unspecified UDP destination port" + log_test $? 0 "Flush by UDP destination port - non-matching" run_cmd "bridge -n $ns1_v4 mdb flush dev vx0" @@ -1121,9 +1121,9 @@ flush() run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 dst_port 4789" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.1" - log_test $? 1 "Flush by device's UDP destination port" + log_test $? 1 "Flush by device's UDP destination port - matching" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.2" - log_test $? 0 "Flush by unspecified UDP destination port" + log_test $? 0 "Flush by device's UDP destination port - non-matching" run_cmd "bridge -n $ns1_v4 mdb flush dev vx0" @@ -1136,9 +1136,9 @@ flush() run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 vni 20010" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep \" vni 20010\"" - log_test $? 1 "Flush by specified destination VNI" + log_test $? 1 "Flush by destination VNI - matching" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep \" vni 20011\"" - log_test $? 0 "Flush by unspecified destination VNI" + log_test $? 0 "Flush by destination VNI - non-matching" run_cmd "bridge -n $ns1_v4 mdb flush dev vx0" @@ -1153,9 +1153,9 @@ flush() run_cmd "bridge -n $ns1_v4 mdb flush dev vx0 vni 10010" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.1" - log_test $? 1 "Flush by destination VNI equal to source VNI" + log_test $? 1 "Flush by destination VNI equal to source VNI - matching" run_cmd "bridge -n $ns1_v4 -d -s mdb get dev vx0 grp 239.1.1.1 src_vni 10010 | grep 198.51.100.2" - log_test $? 0 "Flush by unspecified destination VNI" + log_test $? 0 "Flush by destination VNI equal to source VNI - non-matching" run_cmd "bridge -n $ns1_v4 mdb flush dev vx0" -- 2.43.0

1 year, 3 months

3
2
0 0

[PATCH v3 00/13] security: digest_cache LSM

by Roberto Sassu

From: Roberto Sassu <roberto.sassu(a)huawei.com> Introduce the digest_cache LSM, whose purpose is to deliver reference digest values to integrity providers, such as IMA and IPE, abstracting to them how those digests where extracted from the respective data source. The major benefit is the ability to use the vaste amount of digests already provided (and likely signed) by software vendors, without needing them to adapt their format to the one understood by the integrity provider. IMA and IPE can immediately interface with the digest_cache LSM and query the digest of an accessed file. If the digest is found, it means that the file is coming from the software vendor and not modified. If not, the file might have been corrupted. Each integrity provider decides how to handle this situation. The second major benefit is performance improvement. Since the digest_cache LSM has the ability to extract many digests from a single data source, it means that it has less signatures to verify compared to the approach of verifying individual file signatures (IMA appraisal). Preliminary tests have shown a speedup of IMA appraisal of about 65% for sequential read, and 45% for parallel read. This patch set has as prerequisites the file_release LSM hook (to be introduced with the move of IMA/EVM to the LSM infrastructure), and support for PGP keys, which is still unclear how it should be done. The IMA integration patch set will be introduced separately. Also a PoC based on the current version of IPE can be provided. v2: - Include the TLV parser in this patch set (from user asymmetric keys and signatures) - Move from IMA and make an independent LSM - Remove IMA-specific stuff from this patch set - Add per algorithm hash table - Expect all digest lists to be in the same directory and allow changing the default directory - Support digest lookup on directories, when there is no security.digest_list xattr - Add seq num to digest list file name, to impose ordering on directory iteration - Add a new data type DIGEST_LIST_ENTRY_DATA for the nested data in the tlv digest list format - Add the concept of verification data attached to digest caches - Add the reset mechanism to track changes on digest lists and directory containing the digest lists - Add kernel selftests v1: - Add documentation in Documentation/security/integrity-digest-cache.rst - Pass the mask of IMA actions to digest_cache_alloc() - Add a reference count to the digest cache - Remove the path parameter from digest_cache_get(), and rely on the reference count to avoid the digest cache disappearing while being used - Rename the dentry_to_check parameter of digest_cache_get() to dentry - Rename digest_cache_get() to digest_cache_new() and add digest_cache_get() to set the digest cache in the iint of the inode for which the digest cache was requested - Add dig_owner and dig_user to the iint, to distinguish from which inode the digest cache was created from, and which is using it; consequently it makes the digest cache usable to measure/appraise other digest caches (support not yet enabled) - Add dig_owner_mutex and dig_user_mutex to serialize accesses to dig_owner and dig_user until they are initialized - Enforce strong synchronization and make the contenders wait until dig_owner and dig_user are assigned to the iint the first time - Move checking IMA actions on the digest list earlier, and fail if no action were performed (digest cache not usable) - Remove digest_cache_put(), not needed anymore with the introduction of the reference count - Fail immediately in digest_cache_lookup() if the digest algorithm is not set in the digest cache - Use 64 bit mask for IMA actions on the digest list instead of 8 bit - Return NULL in the inline version of digest_cache_get() - Use list_add_tail() instead of list_add() in the iterator - Copy the digest list path to a separate buffer in digest_cache_iter_dir() - Use digest list parsers verified with Frama-C - Explicitly disable (for now) the possibility in the IMA policy to use the digest cache to measure/appraise other digest lists - Replace exit(<value>) with return <value> in manage_digest_lists.c Roberto Sassu (13): lib: Add TLV parser security: Introduce the digest_cache LSM digest_cache: Add securityfs interface digest_cache: Add hash tables and operations digest_cache: Populate the digest cache from a digest list digest_cache: Parse tlv digest lists digest_cache: Parse rpm digest lists digest_cache: Add management of verification data digest_cache: Add support for directories digest cache: Prefetch digest lists if requested digest_cache: Reset digest cache on file/directory change selftests/digest_cache: Add selftests for digest_cache LSM docs: Add documentation of the digest_cache LSM Documentation/security/digest_cache.rst | 900 ++++++++++++++++++ Documentation/security/index.rst | 1 + MAINTAINERS | 16 + include/linux/digest_cache.h | 89 ++ include/linux/kernel_read_file.h | 1 + include/linux/tlv_parser.h | 28 + include/uapi/linux/lsm.h | 1 + include/uapi/linux/tlv_digest_list.h | 72 ++ include/uapi/linux/tlv_parser.h | 59 ++ include/uapi/linux/xattr.h | 6 + lib/Kconfig | 3 + lib/Makefile | 3 + lib/tlv_parser.c | 214 +++++ lib/tlv_parser.h | 17 + security/Kconfig | 11 +- security/Makefile | 1 + security/digest_cache/Kconfig | 34 + security/digest_cache/Makefile | 11 + security/digest_cache/dir.c | 245 +++++ security/digest_cache/htable.c | 268 ++++++ security/digest_cache/internal.h | 259 +++++ security/digest_cache/main.c | 545 +++++++++++ security/digest_cache/modsig.c | 66 ++ security/digest_cache/parsers/parsers.h | 15 + security/digest_cache/parsers/rpm.c | 223 +++++ security/digest_cache/parsers/tlv.c | 299 ++++++ security/digest_cache/populate.c | 163 ++++ security/digest_cache/reset.c | 168 ++++ security/digest_cache/secfs.c | 87 ++ security/digest_cache/verif.c | 119 +++ security/security.c | 3 +- tools/testing/selftests/Makefile | 1 + .../testing/selftests/digest_cache/.gitignore | 3 + tools/testing/selftests/digest_cache/Makefile | 23 + .../testing/selftests/digest_cache/all_test.c | 706 ++++++++++++++ tools/testing/selftests/digest_cache/common.c | 79 ++ tools/testing/selftests/digest_cache/common.h | 131 +++ .../selftests/digest_cache/common_user.c | 47 + .../selftests/digest_cache/common_user.h | 17 + tools/testing/selftests/digest_cache/config | 1 + .../selftests/digest_cache/generators.c | 248 +++++ .../selftests/digest_cache/generators.h | 19 + .../selftests/digest_cache/testmod/Makefile | 16 + .../selftests/digest_cache/testmod/kern.c | 499 ++++++++++ .../selftests/lsm/lsm_list_modules_test.c | 3 + 45 files changed, 5714 insertions(+), 6 deletions(-) create mode 100644 Documentation/security/digest_cache.rst create mode 100644 include/linux/digest_cache.h create mode 100644 include/linux/tlv_parser.h create mode 100644 include/uapi/linux/tlv_digest_list.h create mode 100644 include/uapi/linux/tlv_parser.h create mode 100644 lib/tlv_parser.c create mode 100644 lib/tlv_parser.h create mode 100644 security/digest_cache/Kconfig create mode 100644 security/digest_cache/Makefile create mode 100644 security/digest_cache/dir.c create mode 100644 security/digest_cache/htable.c create mode 100644 security/digest_cache/internal.h create mode 100644 security/digest_cache/main.c create mode 100644 security/digest_cache/modsig.c create mode 100644 security/digest_cache/parsers/parsers.h create mode 100644 security/digest_cache/parsers/rpm.c create mode 100644 security/digest_cache/parsers/tlv.c create mode 100644 security/digest_cache/populate.c create mode 100644 security/digest_cache/reset.c create mode 100644 security/digest_cache/secfs.c create mode 100644 security/digest_cache/verif.c create mode 100644 tools/testing/selftests/digest_cache/.gitignore create mode 100644 tools/testing/selftests/digest_cache/Makefile create mode 100644 tools/testing/selftests/digest_cache/all_test.c create mode 100644 tools/testing/selftests/digest_cache/common.c create mode 100644 tools/testing/selftests/digest_cache/common.h create mode 100644 tools/testing/selftests/digest_cache/common_user.c create mode 100644 tools/testing/selftests/digest_cache/common_user.h create mode 100644 tools/testing/selftests/digest_cache/config create mode 100644 tools/testing/selftests/digest_cache/generators.c create mode 100644 tools/testing/selftests/digest_cache/generators.h create mode 100644 tools/testing/selftests/digest_cache/testmod/Makefile create mode 100644 tools/testing/selftests/digest_cache/testmod/kern.c -- 2.34.1

1 year, 3 months

2
16
0 0

[PATCH net-next] Correct couple of spelling mistakes

by Prabhav Kumar Vaish

Changes : - "excercise" is corrected to "exercise" in drivers/net/mlxsw/spectrum-2/tc_flower.sh - "mutliple" is corrected to "multiple" in drivers/net/netdevsim/ethtool-fec.sh Signed-off-by: Prabhav Kumar Vaish <pvkumar5749404(a)gmail.com> --- .../testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh | 2 +- tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh index 616d3581419c..31252bc8775e 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh @@ -869,7 +869,7 @@ bloom_simple_test() bloom_complex_test() { # Bloom filter index computation is affected from region ID, eRP - # ID and from the region key size. In order to excercise those parts + # ID and from the region key size. In order to exercise those parts # of the Bloom filter code, use a series of regions, each with a # different key size and send packet that should hit all of them. local index diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh index 7d7829f57550..6c52ce1b0450 100755 --- a/tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh +++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh @@ -49,7 +49,7 @@ for o in llrs rs; do Active FEC encoding: ${o^^}" done -# Test mutliple bits +# Test multiple bits $ETHTOOL --set-fec $NSIM_NETDEV encoding rs llrs check $? s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2) -- 2.34.1

1 year, 3 months

2
1
0 0

[PATCH] Correcting the spelling mistake in selftests drivers/net testing

by Prabhav Kumar Vaish

Changes : - "excercise" is corrected to "exercise" in drivers/net/mlxsw/spectrum-2/tc_flower.sh - "mutliple" is corrected to "multiple" in drivers/net/netdevsim/ethtool-fec.sh Signed-off-by: Prabhav Kumar Vaish <pvkumar5749404(a)gmail.com> --- .../testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh | 2 +- tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh index 616d3581419c..31252bc8775e 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh @@ -869,7 +869,7 @@ bloom_simple_test() bloom_complex_test() { # Bloom filter index computation is affected from region ID, eRP - # ID and from the region key size. In order to excercise those parts + # ID and from the region key size. In order to exercise those parts # of the Bloom filter code, use a series of regions, each with a # different key size and send packet that should hit all of them. local index diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh index 7d7829f57550..6c52ce1b0450 100755 --- a/tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh +++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh @@ -49,7 +49,7 @@ for o in llrs rs; do Active FEC encoding: ${o^^}" done -# Test mutliple bits +# Test multiple bits $ETHTOOL --set-fec $NSIM_NETDEV encoding rs llrs check $? s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2) -- 2.34.1

1 year, 3 months

3
5
0 0

[PATCH net-next] selftests: net: Correct couple of spelling mistakes

by Prabhav Kumar Vaish

Changes : - "excercise" is corrected to "exercise" in drivers/net/mlxsw/spectrum-2/tc_flower.sh - "mutliple" is corrected to "multiple" in drivers/net/netdevsim/ethtool-fec.sh Signed-off-by: Prabhav Kumar Vaish <pvkumar5749404(a)gmail.com> --- .../testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh | 2 +- tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh index 616d3581419c..31252bc8775e 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh @@ -869,7 +869,7 @@ bloom_simple_test() bloom_complex_test() { # Bloom filter index computation is affected from region ID, eRP - # ID and from the region key size. In order to excercise those parts + # ID and from the region key size. In order to exercise those parts # of the Bloom filter code, use a series of regions, each with a # different key size and send packet that should hit all of them. local index diff --git a/tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh b/tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh index 7d7829f57550..6c52ce1b0450 100755 --- a/tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh +++ b/tools/testing/selftests/drivers/net/netdevsim/ethtool-fec.sh @@ -49,7 +49,7 @@ for o in llrs rs; do Active FEC encoding: ${o^^}" done -# Test mutliple bits +# Test multiple bits $ETHTOOL --set-fec $NSIM_NETDEV encoding rs llrs check $? s=$($ETHTOOL --show-fec $NSIM_NETDEV | tail -2) -- 2.34.1

1 year, 3 months

2
1
0 0

[PATCH RFC bpf-next v3 00/16] sleepable bpf_timer (was: allow HID-BPF to do device IOs)

by Benjamin Tissoires

[Partly a RFC/formal submission: there are still FIXMEs in the code] [Also using bpf-next as the base tree for HID changes as there will be conflicting changes otherwise, so I'm personaly fine for the HID commits to go through bpf-next] IMO, patches 1-3 and 9-14 are ready to go, rest is still pending review. For reference, the use cases I have in mind: --- Basically, I need to be able to defer a HID-BPF program for the following reasons (from the aforementioned patch): 1. defer an event: Sometimes we receive an out of proximity event, but the device can not be trusted enough, and we need to ensure that we won't receive another one in the following n milliseconds. So we need to wait those n milliseconds, and eventually re-inject that event in the stack. 2. inject new events in reaction to one given event: We might want to transform one given event into several. This is the case for macro keys where a single key press is supposed to send a sequence of key presses. But this could also be used to patch a faulty behavior, if a device forgets to send a release event. 3. communicate with the device in reaction to one event: We might want to communicate back to the device after a given event. For example a device might send us an event saying that it came back from sleeping state and needs to be re-initialized. Currently we can achieve that by keeping a userspace program around, raise a bpf event, and let that userspace program inject the events and commands. However, we are just keeping that program alive as a daemon for just scheduling commands. There is no logic in it, so it doesn't really justify an actual userspace wakeup. So a kernel workqueue seems simpler to handle. The other part I'm not sure is whether we can say that BPF maps of type queue/stack can be used in sleepable context. I don't see any warning when running the test programs, but that's probably not a guarantee I'm doing the things properly :) Cheers, Benjamin To: Alexei Starovoitov <ast(a)kernel.org> To: Daniel Borkmann <daniel(a)iogearbox.net> To: John Fastabend <john.fastabend(a)gmail.com> To: Andrii Nakryiko <andrii(a)kernel.org> To: Martin KaFai Lau <martin.lau(a)linux.dev> To: Eduard Zingerman <eddyz87(a)gmail.com> To: Song Liu <song(a)kernel.org> To: Yonghong Song <yonghong.song(a)linux.dev> To: KP Singh <kpsingh(a)kernel.org> To: Stanislav Fomichev <sdf(a)google.com> To: Hao Luo <haoluo(a)google.com> To: Jiri Olsa <jolsa(a)kernel.org> To: Jiri Kosina <jikos(a)kernel.org> To: Benjamin Tissoires <benjamin.tissoires(a)redhat.com> To: Jonathan Corbet <corbet(a)lwn.net> To: Shuah Khan <shuah(a)kernel.org> Cc: <bpf(a)vger.kernel.org> Cc: <linux-kernel(a)vger.kernel.org> Cc: <linux-input(a)vger.kernel.org> Cc: <linux-doc(a)vger.kernel.org> Cc: <linux-kselftest(a)vger.kernel.org> Signed-off-by: Benjamin Tissoires <bentiss(a)kernel.org> --- Changes in v3: - fixed the crash from v2 - changed the API to have only BPF_F_TIMER_SLEEPABLE for bpf_timer_start() - split the new kfuncs/verifier patch into several sub-patches, for easier reviews - Link to v2: https://lore.kernel.org/r/20240214-hid-bpf-sleepable-v2-0-5756b054724d@kern… Changes in v2: - make use of bpf_timer (and dropped the custom HID handling) - implemented bpf_timer_set_sleepable_cb as a kfunc - still not implemented global subprogs - no sleepable bpf_timer selftests yet - Link to v1: https://lore.kernel.org/r/20240209-hid-bpf-sleepable-v1-0-4cc895b5adbd@kern… --- Benjamin Tissoires (16): bpf/verifier: allow more maps in sleepable bpf programs bpf/verifier: introduce in_sleepable() helper bpf/verifier: add is_async_callback_calling_insn() helper bpf/helpers: introduce sleepable bpf_timers bpf/verifier: add bpf_timer as a kfunc capable type bpf/helpers: introduce bpf_timer_set_sleepable_cb() kfunc bpf/helpers: mark the callback of bpf_timer_set_sleepable_cb() as sleepable bpf/verifier: do_misc_fixups for is_bpf_timer_set_sleepable_cb_kfunc HID: bpf/dispatch: regroup kfuncs definitions HID: bpf: export hid_hw_output_report as a BPF kfunc selftests/hid: Add test for hid_bpf_hw_output_report HID: bpf: allow to inject HID event from BPF selftests/hid: add tests for hid_bpf_input_report HID: bpf: allow to use bpf_timer_set_sleepable_cb() in tracing callbacks. selftests/hid: add test for bpf_timer selftests/hid: add KASAN to the VM tests Documentation/hid/hid-bpf.rst | 2 +- drivers/hid/bpf/hid_bpf_dispatch.c | 232 ++++++++++++++------- drivers/hid/hid-core.c | 2 + include/linux/bpf_verifier.h | 2 + include/linux/hid_bpf.h | 3 + include/uapi/linux/bpf.h | 4 + kernel/bpf/helpers.c | 140 +++++++++++-- kernel/bpf/verifier.c | 114 ++++++++-- tools/testing/selftests/hid/config.common | 1 + tools/testing/selftests/hid/hid_bpf.c | 195 ++++++++++++++++- tools/testing/selftests/hid/progs/hid.c | 198 ++++++++++++++++++ .../testing/selftests/hid/progs/hid_bpf_helpers.h | 8 + 12 files changed, 795 insertions(+), 106 deletions(-) --- base-commit: 5c331823b3fc52ffd27524bf5b7e0d137114f470 change-id: 20240205-hid-bpf-sleepable-c01260fd91c4 Best regards, -- Benjamin Tissoires <bentiss(a)kernel.org>

1 year, 3 months

5
39
0 0

kselftest/next kselftest-lkdtm: 2 runs, 1 regressions (v6.8-rc1-56-g539cd3f4da3f)

by kernelci.org bot

kselftest/next kselftest-lkdtm: 2 runs, 1 regressions (v6.8-rc1-56-g539cd3f4da3f) Regressions Summary ------------------- platform | arch | lab | compiler | defconfig | regressions ----------------+------+---------------+----------+------------------------------+------------ imx6q-sabrelite | arm | lab-collabora | gcc-10 | multi_v7_defconfig+kselftest | 1 Details: https://kernelci.org/test/job/kselftest/branch/next/kernel/v6.8-rc1-56-g539… Test: kselftest-lkdtm Tree: kselftest Branch: next Describe: v6.8-rc1-56-g539cd3f4da3f URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git SHA: 539cd3f4da3fdbe7dc353634e004e4b0e725c35a Test Regressions ---------------- platform | arch | lab | compiler | defconfig | regressions ----------------+------+---------------+----------+------------------------------+------------ imx6q-sabrelite | arm | lab-collabora | gcc-10 | multi_v7_defconfig+kselftest | 1 Details: https://kernelci.org/test/plan/id/65ded31017d8855223637012 Results: 0 PASS, 1 FAIL, 0 SKIP Full config: multi_v7_defconfig+kselftest Compiler: gcc-10 (arm-linux-gnueabihf-gcc (Debian 10.2.1-6) 10.2.1 20210110) Plain log: https://storage.kernelci.org//kselftest/next/v6.8-rc1-56-g539cd3f4da3f/arm/… HTML log: https://storage.kernelci.org//kselftest/next/v6.8-rc1-56-g539cd3f4da3f/arm/… Rootfs: http://storage.kernelci.org/images/rootfs/debian/bullseye-kselftest/2024012… * kselftest-lkdtm.login: https://kernelci.org/test/case/id/65ded31017d8855223637013 failing since 454 days (last pass: v6.1-rc1-23-g00dd59519141, first fail: v6.1-rc1-23-g8008d88e6d16)

1 year, 3 months

1
0
0 0

kselftest/next build: 5 builds: 2 failed, 3 passed, 2 errors, 5 warnings (v6.8-rc1-56-g539cd3f4da3f)

by kernelci.org bot

kselftest/next build: 5 builds: 2 failed, 3 passed, 2 errors, 5 warnings (v6.8-rc1-56-g539cd3f4da3f) Full Build Summary: https://kernelci.org/build/kselftest/branch/next/kernel/v6.8-rc1-56-g539cd3… Tree: kselftest Branch: next Git Describe: v6.8-rc1-56-g539cd3f4da3f Git Commit: 539cd3f4da3fdbe7dc353634e004e4b0e725c35a Git URL: https://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest.git Built: 4 unique architectures Build Failures Detected: i386: i386_defconfig+kselftest: (gcc-10) FAIL x86_64: x86_64_defconfig+kselftest: (gcc-10) FAIL Errors and Warnings Detected: arm64: defconfig+kselftest (gcc-10): 1 warning arm: multi_v7_defconfig+kselftest (gcc-10): 1 warning i386: i386_defconfig+kselftest (gcc-10): 1 error, 1 warning x86_64: x86_64_defconfig+kselftest (gcc-10): 1 error, 1 warning x86_64_defconfig+kselftest (clang-16): 1 warning Errors summary: 2 include/linux/fortify-string.h:57:29: error: ‘__builtin_memcpy’ offset 32 is out of the bounds [0, 0] [-Werror=array-bounds] Warnings summary: 2 include/linux/fortify-string.h:57:29: warning: ‘__builtin_memcpy’ offset 32 is out of the bounds [0, 0] [-Warray-bounds] 2 cc1: all warnings being treated as errors 1 vmlinux.o: warning: objtool: set_ftrace_ops_ro+0x39: relocation to !ENDBR: .text+0x14cfd6 ================================================================================ Detailed per-defconfig build reports: -------------------------------------------------------------------------------- defconfig+kselftest (arm64, gcc-10) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: include/linux/fortify-string.h:57:29: warning: ‘__builtin_memcpy’ offset 32 is out of the bounds [0, 0] [-Warray-bounds] -------------------------------------------------------------------------------- i386_defconfig+kselftest (i386, gcc-10) — FAIL, 1 error, 1 warning, 0 section mismatches Errors: include/linux/fortify-string.h:57:29: error: ‘__builtin_memcpy’ offset 32 is out of the bounds [0, 0] [-Werror=array-bounds] Warnings: cc1: all warnings being treated as errors -------------------------------------------------------------------------------- multi_v7_defconfig+kselftest (arm, gcc-10) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: include/linux/fortify-string.h:57:29: warning: ‘__builtin_memcpy’ offset 32 is out of the bounds [0, 0] [-Warray-bounds] -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, gcc-10) — FAIL, 1 error, 1 warning, 0 section mismatches Errors: include/linux/fortify-string.h:57:29: error: ‘__builtin_memcpy’ offset 32 is out of the bounds [0, 0] [-Werror=array-bounds] Warnings: cc1: all warnings being treated as errors -------------------------------------------------------------------------------- x86_64_defconfig+kselftest (x86_64, clang-16) — PASS, 0 errors, 1 warning, 0 section mismatches Warnings: vmlinux.o: warning: objtool: set_ftrace_ops_ro+0x39: relocation to !ENDBR: .text+0x14cfd6 --- For more info write to <info(a)kernelci.org>

1 year, 3 months

1
0
0 0

[PATCH v2] drm: tests: Fix invalid printf format specifiers in KUnit tests

by David Gow

The drm_buddy_test's alloc_contiguous test used a u64 for the page size, which was then updated to be an 'unsigned long' to avoid 64-bit multiplication division helpers. However, the variable is logged by some KUNIT_ASSERT_EQ_MSG() using the '%d' or '%llu' format specifiers, the former of which is always wrong, and the latter is no longer correct now that ps is no longer a u64. Fix these to all use '%lu'. Also, drm_mm_test calls KUNIT_FAIL() with an empty string as the message. gcc and clang warns if a printf format string is empty, so give these some more detailed error messages, which should be more useful anyway. Fixes: a64056bb5a32 ("drm/tests/drm_buddy: add alloc_contiguous test") Fixes: fca7526b7d89 ("drm/tests/drm_buddy: fix build failure on 32-bit targets") Fixes: fc8d29e298cf ("drm: selftest: convert drm_mm selftest to KUnit") Reviewed-by: Matthew Auld <matthew.auld(a)intel.com> Acked-by: Christian König <christian.koenig(a)amd.com> Tested-by: Guenter Roeck <linux(a)roeck-us.net> Reviewed-by: Justin Stitt <justinstitt(a)google.com> Signed-off-by: David Gow <davidgow(a)google.com> --- Changes since v1: https://lore.kernel.org/linux-kselftest/20240221092728.1281499-8-davidgow@g… - Split this patch out, as the others have been applied already. - Rebase on 6.8-rc6 - Add everyone's {Reviewed,Acked,Tested}-by tags. Thanks! --- drivers/gpu/drm/tests/drm_buddy_test.c | 14 +++++++------- drivers/gpu/drm/tests/drm_mm_test.c | 6 +++--- 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/gpu/drm/tests/drm_buddy_test.c b/drivers/gpu/drm/tests/drm_buddy_test.c index 2f32fb2f12e7..3dbfa3078449 100644 --- a/drivers/gpu/drm/tests/drm_buddy_test.c +++ b/drivers/gpu/drm/tests/drm_buddy_test.c @@ -55,30 +55,30 @@ static void drm_test_buddy_alloc_contiguous(struct kunit *test) KUNIT_ASSERT_FALSE_MSG(test, drm_buddy_alloc_blocks(&mm, 0, mm_size, ps, ps, list, 0), - "buddy_alloc hit an error size=%u\n", + "buddy_alloc hit an error size=%lu\n", ps); } while (++i < n_pages); KUNIT_ASSERT_TRUE_MSG(test, drm_buddy_alloc_blocks(&mm, 0, mm_size, 3 * ps, ps, &allocated, DRM_BUDDY_CONTIGUOUS_ALLOCATION), - "buddy_alloc didn't error size=%u\n", 3 * ps); + "buddy_alloc didn't error size=%lu\n", 3 * ps); drm_buddy_free_list(&mm, &middle); KUNIT_ASSERT_TRUE_MSG(test, drm_buddy_alloc_blocks(&mm, 0, mm_size, 3 * ps, ps, &allocated, DRM_BUDDY_CONTIGUOUS_ALLOCATION), - "buddy_alloc didn't error size=%u\n", 3 * ps); + "buddy_alloc didn't error size=%lu\n", 3 * ps); KUNIT_ASSERT_TRUE_MSG(test, drm_buddy_alloc_blocks(&mm, 0, mm_size, 2 * ps, ps, &allocated, DRM_BUDDY_CONTIGUOUS_ALLOCATION), - "buddy_alloc didn't error size=%u\n", 2 * ps); + "buddy_alloc didn't error size=%lu\n", 2 * ps); drm_buddy_free_list(&mm, &right); KUNIT_ASSERT_TRUE_MSG(test, drm_buddy_alloc_blocks(&mm, 0, mm_size, 3 * ps, ps, &allocated, DRM_BUDDY_CONTIGUOUS_ALLOCATION), - "buddy_alloc didn't error size=%u\n", 3 * ps); + "buddy_alloc didn't error size=%lu\n", 3 * ps); /* * At this point we should have enough contiguous space for 2 blocks, * however they are never buddies (since we freed middle and right) so @@ -87,13 +87,13 @@ static void drm_test_buddy_alloc_contiguous(struct kunit *test) KUNIT_ASSERT_FALSE_MSG(test, drm_buddy_alloc_blocks(&mm, 0, mm_size, 2 * ps, ps, &allocated, DRM_BUDDY_CONTIGUOUS_ALLOCATION), - "buddy_alloc hit an error size=%u\n", 2 * ps); + "buddy_alloc hit an error size=%lu\n", 2 * ps); drm_buddy_free_list(&mm, &left); KUNIT_ASSERT_FALSE_MSG(test, drm_buddy_alloc_blocks(&mm, 0, mm_size, 3 * ps, ps, &allocated, DRM_BUDDY_CONTIGUOUS_ALLOCATION), - "buddy_alloc hit an error size=%u\n", 3 * ps); + "buddy_alloc hit an error size=%lu\n", 3 * ps); total = 0; list_for_each_entry(block, &allocated, link) diff --git a/drivers/gpu/drm/tests/drm_mm_test.c b/drivers/gpu/drm/tests/drm_mm_test.c index 1eb0c304f960..f37c0d765865 100644 --- a/drivers/gpu/drm/tests/drm_mm_test.c +++ b/drivers/gpu/drm/tests/drm_mm_test.c @@ -157,7 +157,7 @@ static void drm_test_mm_init(struct kunit *test) /* After creation, it should all be one massive hole */ if (!assert_one_hole(test, &mm, 0, size)) { - KUNIT_FAIL(test, ""); + KUNIT_FAIL(test, "mm not one hole on creation"); goto out; } @@ -171,14 +171,14 @@ static void drm_test_mm_init(struct kunit *test) /* After filling the range entirely, there should be no holes */ if (!assert_no_holes(test, &mm)) { - KUNIT_FAIL(test, ""); + KUNIT_FAIL(test, "mm has holes when filled"); goto out; } /* And then after emptying it again, the massive hole should be back */ drm_mm_remove_node(&tmp); if (!assert_one_hole(test, &mm, 0, size)) { - KUNIT_FAIL(test, ""); + KUNIT_FAIL(test, "mm does not have single hole after emptying"); goto out; } -- 2.44.0.rc1.240.g4c46232300-goog

1 year, 3 months

1
0
0 0

[PATCH v2 0/4] Improvements to livepatch kselftests on top of kselftest-next

by Marcos Paulo de Souza

The changes on lib.mk are both for simplification and also clarification, like in the case of not handling TEST_GEN_MODS_DIR directly. There is a new patch to solve one issue reported by build bot. These changes apply on top of the current kselftest-next branch. Please review! Signed-off-by: Marcos Paulo de Souza <mpdesouza(a)suse.com> --- Changes in v2: - Added a new patch to avoid building the modules/running the tests if kernel-devel is not installed. Resolving an issue reported by the build bot. - Reordered the patches, showing the more simple ones first. Besides patch 0002, all the other three didn't changed since v1. - Link to v1: https://lore.kernel.org/r/20240215-lp-selftests-fixes-v1-0-89f4a6f5cddc@sus… --- Marcos Paulo de Souza (4): selftests: livepatch: Add initial .gitignore selftests: livepatch: Avoid running the tests if kernel-devel is missing selftests: lib.mk: Do not process TEST_GEN_MODS_DIR selftests: lib.mk: Simplify TEST_GEN_MODS_DIR handling tools/testing/selftests/lib.mk | 19 +++++++------------ tools/testing/selftests/livepatch/.gitignore | 1 + tools/testing/selftests/livepatch/functions.sh | 13 +++++++++++++ .../testing/selftests/livepatch/test_modules/Makefile | 6 ++++++ 4 files changed, 27 insertions(+), 12 deletions(-) --- base-commit: 6f1a214d446b2f2f9c8c4b96755a8f0316ba4436 change-id: 20240215-lp-selftests-fixes-7d4bab3c0712 Best regards, -- Marcos Paulo de Souza <mpdesouza(a)suse.com>

1 year, 3 months

2
6
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror February 2024