Linux-kselftest-mirror November 2024

linux-kselftest-mirror@lists.linaro.org

224 participants
291 discussions

[PATCH RFC v3 00/10] extensible syscalls: CHECK_FIELDS to allow for easier feature detection

by Aleksa Sarai

This is something that I've been thinking about for a while. We had a discussion at LPC 2020 about this[1] but the proposals suggested there never materialised. In short, it is quite difficult for userspace to detect the feature capability of syscalls at runtime. This is something a lot of programs want to do, but they are forced to create elaborate scenarios to try to figure out if a feature is supported without causing damage to the system. For the vast majority of cases, each individual feature also needs to be tested individually (because syscall results are all-or-nothing), so testing even a single syscall's feature set can easily inflate the startup time of programs. This patchset implements the fairly minimal design I proposed in this talk[2] and in some old LKML threads (though I can't find the exact references ATM). The general flow looks like: 1. Userspace will indicate to the kernel that a syscall should a be no-op by setting the top bit of the extensible struct size argument. We will almost certainly never support exabyte sized structs, so the top bits are free for us to use as makeshift flag bits. This is preferable to using the per-syscall flag field inside the structure because seccomp can easily detect the bit in the flag and allow the probe or forcefully return -EEXTSYS_NOOP. 2. The kernel will then fill the provided structure with every valid bit pattern that the current kernel understands. For flags or other bitflag-like fields, this is the set of valid flags or bits. For pointer fields or fields that take an arbitrary value, the field has every bit set (0xFF... to fill the field) to indicate that any value is valid in the field. 3. The syscall then returns -EEXTSYS_NOOP which is an errno that will only ever be used for this purpose (so userspace can be sure that the request succeeded). On older kernels, the syscall will return a different error (usually -E2BIG or -EFAULT) and userspace can do their old-fashioned checks. 4. Userspace can then check which flags and fields are supported by looking at the fields in the returned structure. Flags are checked by doing an AND with the flags field, and field support can checked by comparing to 0. In principle you could just AND the entire structure if you wanted to do this check generically without caring about the structure contents (this is what libraries might consider doing). Userspace can even find out the internal kernel structure size by passing a PAGE_SIZE buffer and seeing how many bytes are non-zero. As with copy_struct_from_user(), this is designed to be forward- and backwards- compatible. This allows programas to get a one-shot understanding of what features a syscall supports without having to do any elaborate setups or tricks to detect support for destructive features. Flags can simply be ANDed to check if they are in the supported set, and fields can just be checked to see if they are non-zero. This patchset is IMHO the simplest way we can add the ability to introspect the feature set of extensible struct (copy_struct_from_user) syscalls. It doesn't preclude the chance of a more generic mechanism being added later. The intended way of using this interface to get feature information looks something like the following (imagine that openat2 has gained a new field and a new flag in the future): static bool openat2_no_automount_supported; static bool openat2_cwd_fd_supported; int check_openat2_support(void) { int err; struct open_how how = {}; err = openat2(AT_FDCWD, ".", &how, CHECK_FIELDS | sizeof(how)); assert(err < 0); switch (errno) { case EFAULT: case E2BIG: /* Old kernel... */ check_support_the_old_way(); break; case EEXTSYS_NOOP: openat2_no_automount_supported = (how.flags & RESOLVE_NO_AUTOMOUNT); openat2_cwd_fd_supported = (how.cwd_fd != 0); break; } } This series adds CHECK_FIELDS support for the following extensible struct syscalls, as they are quite likely to grow flags in the near future: * openat2 * clone3 * mount_setattr [1]: https://lwn.net/Articles/830666/ [2]: https://youtu.be/ggD-eb3yPVs Signed-off-by: Aleksa Sarai <cyphar(a)cyphar.com> --- Changes in v3: - Fix copy_struct_to_user() return values in case of clear_user() failure. - v2: <https://lore.kernel.org/r/20240906-extensible-structs-check_fields-v2-0-0f4…> Changes in v2: - Add CHECK_FIELDS support to mount_setattr(2). - Fix build failure on architectures with custom errno values. - Rework selftests to use the tools/ uAPI headers rather than custom defining EEXTSYS_NOOP. - Make sure we return -EINVAL and -E2BIG for invalid sizes even if CHECK_FIELDS is set, and add some tests for that. - v1: <https://lore.kernel.org/r/20240902-extensible-structs-check_fields-v1-0-545…> --- Aleksa Sarai (10): uaccess: add copy_struct_to_user helper sched_getattr: port to copy_struct_to_user openat2: explicitly return -E2BIG for (usize > PAGE_SIZE) openat2: add CHECK_FIELDS flag to usize argument selftests: openat2: add 0xFF poisoned data after misaligned struct selftests: openat2: add CHECK_FIELDS selftests clone3: add CHECK_FIELDS flag to usize argument selftests: clone3: add CHECK_FIELDS selftests mount_setattr: add CHECK_FIELDS flag to usize argument selftests: mount_setattr: add CHECK_FIELDS selftest arch/alpha/include/uapi/asm/errno.h | 3 + arch/mips/include/uapi/asm/errno.h | 3 + arch/parisc/include/uapi/asm/errno.h | 3 + arch/sparc/include/uapi/asm/errno.h | 3 + fs/namespace.c | 17 ++ fs/open.c | 18 ++ include/linux/uaccess.h | 97 ++++++++ include/uapi/asm-generic/errno.h | 3 + include/uapi/linux/openat2.h | 2 + kernel/fork.c | 30 ++- kernel/sched/syscalls.c | 42 +--- tools/arch/alpha/include/uapi/asm/errno.h | 3 + tools/arch/mips/include/uapi/asm/errno.h | 3 + tools/arch/parisc/include/uapi/asm/errno.h | 3 + tools/arch/sparc/include/uapi/asm/errno.h | 3 + tools/include/uapi/asm-generic/errno.h | 3 + tools/include/uapi/asm-generic/posix_types.h | 101 ++++++++ tools/testing/selftests/clone3/.gitignore | 1 + tools/testing/selftests/clone3/Makefile | 4 +- .../testing/selftests/clone3/clone3_check_fields.c | 264 +++++++++++++++++++++ tools/testing/selftests/mount_setattr/Makefile | 2 +- .../selftests/mount_setattr/mount_setattr_test.c | 53 ++++- tools/testing/selftests/openat2/Makefile | 2 + tools/testing/selftests/openat2/openat2_test.c | 165 ++++++++++++- 24 files changed, 777 insertions(+), 51 deletions(-) --- base-commit: 98f7e32f20d28ec452afb208f9cffc08448a2652 change-id: 20240803-extensible-structs-check_fields-a47e94cef691 Best regards, -- Aleksa Sarai <cyphar(a)cyphar.com>

11 months, 3 weeks

[PATCH 0/3] Fix test_bpf_syscall_macro selftest on powerpc

by Saket Kumar Bhaskar

Since, syscall wrapper is supported on powerpc with syscall entry symbols as sys_*, changes done to fix selftests like test_bpf_syscall_macro, attach_probe/auto, etc. Saket Kumar Bhaskar (3): libbpf: Fix accessing the syscall argument on powerpc libbpf: Remove powerpc prefix from syscall function names selftests/bpf: Define SYS_PREFIX for powerpc tools/lib/bpf/bpf_tracing.h | 9 +++++++-- tools/lib/bpf/libbpf.c | 10 ++++++++-- tools/testing/selftests/bpf/progs/bpf_misc.h | 3 +++ 3 files changed, 18 insertions(+), 4 deletions(-) -- 2.43.5

11 months, 4 weeks

[PATCH v2] kunit: Introduce autorun option

by Stanislav Kinsburskii

The new option controls tests run on boot or module load. With the new debugfs "run" dentry allowing to run tests on demand, an ability to disable automatic tests run becomes a useful option in case of intrusive tests. The option is set to true by default to preserve the existent behavior. It can be overridden by either the corresponding module option or by the corresponding config build option. Signed-off-by: Stanislav Kinsburskii <skinsburskii(a)linux.microsoft.com> --- include/kunit/test.h | 4 +++- lib/kunit/Kconfig | 12 ++++++++++++ lib/kunit/debugfs.c | 2 +- lib/kunit/executor.c | 21 +++++++++++++++++++-- lib/kunit/test.c | 6 ++++-- 5 files changed, 39 insertions(+), 6 deletions(-) diff --git a/include/kunit/test.h b/include/kunit/test.h index 34b71e42fb10..58dbab60f853 100644 --- a/include/kunit/test.h +++ b/include/kunit/test.h @@ -312,6 +312,7 @@ static inline void kunit_set_failure(struct kunit *test) } bool kunit_enabled(void); +bool kunit_autorun(void); const char *kunit_action(void); const char *kunit_filter_glob(void); char *kunit_filter(void); @@ -334,7 +335,8 @@ kunit_filter_suites(const struct kunit_suite_set *suite_set, int *err); void kunit_free_suite_set(struct kunit_suite_set suite_set); -int __kunit_test_suites_init(struct kunit_suite * const * const suites, int num_suites); +int __kunit_test_suites_init(struct kunit_suite * const * const suites, int num_suites, + bool run_tests); void __kunit_test_suites_exit(struct kunit_suite **suites, int num_suites); diff --git a/lib/kunit/Kconfig b/lib/kunit/Kconfig index 34d7242d526d..a97897edd964 100644 --- a/lib/kunit/Kconfig +++ b/lib/kunit/Kconfig @@ -81,4 +81,16 @@ config KUNIT_DEFAULT_ENABLED In most cases this should be left as Y. Only if additional opt-in behavior is needed should this be set to N. +config KUNIT_AUTORUN_ENABLED + bool "Default value of kunit.autorun" + default y + help + Sets the default value of kunit.autorun. If set to N then KUnit + tests will not run after initialization unless kunit.autorun=1 is + passed to the kernel command line. The test can still be run manually + via debugfs interface. + + In most cases this should be left as Y. Only if additional opt-in + behavior is needed should this be set to N. + endif # KUNIT diff --git a/lib/kunit/debugfs.c b/lib/kunit/debugfs.c index d548750a325a..9df064f40d98 100644 --- a/lib/kunit/debugfs.c +++ b/lib/kunit/debugfs.c @@ -145,7 +145,7 @@ static ssize_t debugfs_run(struct file *file, struct inode *f_inode = file->f_inode; struct kunit_suite *suite = (struct kunit_suite *) f_inode->i_private; - __kunit_test_suites_init(&suite, 1); + __kunit_test_suites_init(&suite, 1, true); return count; } diff --git a/lib/kunit/executor.c b/lib/kunit/executor.c index 34b7b6833df3..3f39955cb0f1 100644 --- a/lib/kunit/executor.c +++ b/lib/kunit/executor.c @@ -29,6 +29,22 @@ const char *kunit_action(void) return action_param; } +/* + * Run KUnit tests after initialization + */ +#ifdef CONFIG_KUNIT_AUTORUN_ENABLED +static bool autorun_param = true; +#else +static bool autorun_param; +#endif +module_param_named(autorun, autorun_param, bool, 0); +MODULE_PARM_DESC(autorun, "Run KUnit tests after initialization"); + +bool kunit_autorun(void) +{ + return autorun_param; +} + static char *filter_glob_param; static char *filter_param; static char *filter_action_param; @@ -260,13 +276,14 @@ kunit_filter_suites(const struct kunit_suite_set *suite_set, void kunit_exec_run_tests(struct kunit_suite_set *suite_set, bool builtin) { size_t num_suites = suite_set->end - suite_set->start; + bool autorun = kunit_autorun(); - if (builtin || num_suites) { + if (autorun && (builtin || num_suites)) { pr_info("KTAP version 1\n"); pr_info("1..%zu\n", num_suites); } - __kunit_test_suites_init(suite_set->start, num_suites); + __kunit_test_suites_init(suite_set->start, num_suites, autorun); } void kunit_exec_list_tests(struct kunit_suite_set *suite_set, bool include_attr) diff --git a/lib/kunit/test.c b/lib/kunit/test.c index 089c832e3cdb..146d1b48a096 100644 --- a/lib/kunit/test.c +++ b/lib/kunit/test.c @@ -708,7 +708,8 @@ bool kunit_enabled(void) return enable_param; } -int __kunit_test_suites_init(struct kunit_suite * const * const suites, int num_suites) +int __kunit_test_suites_init(struct kunit_suite * const * const suites, int num_suites, + bool run_tests) { unsigned int i; @@ -731,7 +732,8 @@ int __kunit_test_suites_init(struct kunit_suite * const * const suites, int num_ for (i = 0; i < num_suites; i++) { kunit_init_suite(suites[i]); - kunit_run_tests(suites[i]); + if (run_tests) + kunit_run_tests(suites[i]); } static_branch_dec(&kunit_running);

12 months

[PATCH v2 0/2] kunit: enable hardware virtualization

by Tamir Duberstein

This series implements feature detection of hardware virtualization on Linux and macOS; the latter being my primary use case. This yields approximately a 6x improvement using HVF on M3 Pro. Signed-off-by: Tamir Duberstein <tamird(a)gmail.com> --- Changes in v2: - Use QEMU accelerator fallback (Alyssa Ross, Thomas Weißschuh). - Link to v1: https://lore.kernel.org/r/20241025-kunit-qemu-accel-macos-v1-0-2f30c26192d4… --- Tamir Duberstein (2): kunit: add fallback for os.sched_getaffinity kunit: enable hardware acceleration when available tools/testing/kunit/kunit.py | 11 ++++++++++- tools/testing/kunit/kunit_kernel.py | 3 +++ tools/testing/kunit/qemu_configs/arm64.py | 2 +- 3 files changed, 14 insertions(+), 2 deletions(-) --- base-commit: 81983758430957d9a5cb3333fe324fd70cf63e7e change-id: 20241025-kunit-qemu-accel-macos-2840e4c2def5 Best regards, -- Tamir Duberstein <tamird(a)gmail.com>

12 months

[PATCH v4 0/8] Basic SEV-SNP Selftests

by Pratik R. Sampat

This patch series extends the sev_init2 and the sev_smoke test to exercise the SEV-SNP VM launch workflow. Primarily, it introduces the architectural defines, its support in the SEV library and extends the tests to interact with the SEV-SNP ioctl() wrappers. Patch 1 - Do not advertize SNP on incompatible firmware Patch 2 - SNP test for KVM_SEV_INIT2 Patch 3 - Add VMGEXIT helper Patch 4 - Introduce SEV+ VM type check Patch 5 - SNP iotcl() plumbing for the SEV library Patch 6 - Force set GUEST_MEMFD for SNP Patch 7 - Cleanups of smoke test - Decouple policy from type Patch 8 - SNP smoke test v4: 1. Remove SNP FW API version check in the test and ensure the KVM capability advertizes the presence of the feature. Retain the minimum version definitions to exercise these API versions in the smoke test. 2. Retained only the SNP smoke test and SNP_INIT2 test 3. The SNP architectural defined merged with SNP_INIT2 test patch 4. SNP shutdown merged with SNP smoke test patch 5. Add SEV VM type check to abstract comparisons and reduce clutter 6. Define a SNP default policy which sets bits based on the presence of SMT 7. Decouple privatization and encryption for it to be SNP agnostic 8. Assert for only positive tests using vm_ioctl() 9. Dropped tested-by tags In summary - based on comments from Sean, I have primarily reduced the scope of this patch series to focus on breaking down the SNP smoke test patch (v3 - patch2) to first introduce SEV-SNP support and use this interface to extend the sev_init2 and the sev_smoke test. The rest of the v3 patchset that introduces ioctl, pre fault, fallocate and negative tests, will be re-worked and re-introduced subsequently in future patch series post addressing the issues discussed. v3: https://lore.kernel.org/kvm/20240905124107.6954-1-pratikrajesh.sampat@amd.c… 1. Remove the assignments for the prefault and fallocate test type enums. 2. Fix error message for sev launch measure and finish. 3. Collect tested-by tags [Peter, Srikanth] Any feedback/review is highly appreciated! Pratik R. Sampat (8): KVM: SEV: Disable SEV-SNP on FW validation failure KVM: selftests: SEV-SNP test for KVM_SEV_INIT2 KVM: selftests: Add VMGEXIT helper KVM: selftests: Introduce SEV VM type check KVM: selftests: Add library support for interacting with SNP KVM: selftests: Force GUEST_MEMFD flag for SNP VM type KVM: selftests: Abstractions for SEV to decouple policy from type KVM: selftests: Add a basic SEV-SNP smoke test arch/x86/kvm/svm/sev.c | 4 +- drivers/crypto/ccp/sev-dev.c | 6 ++ include/linux/psp-sev.h | 3 + .../selftests/kvm/include/x86_64/processor.h | 1 + .../selftests/kvm/include/x86_64/sev.h | 55 ++++++++++- tools/testing/selftests/kvm/lib/kvm_util.c | 7 +- .../selftests/kvm/lib/x86_64/processor.c | 4 +- tools/testing/selftests/kvm/lib/x86_64/sev.c | 98 ++++++++++++++++++- .../selftests/kvm/x86_64/sev_init2_tests.c | 13 +++ .../selftests/kvm/x86_64/sev_smoke_test.c | 96 ++++++++++++++---- 10 files changed, 258 insertions(+), 29 deletions(-) -- 2.43.0

12 months

[PATCH] kunit: Introduce autorun option

by Stanislav Kinsburskii

The new option controls tests run on boot or module load. With the new debugfs "run" dentry allowing to run tests on demand, an ability to disable automatic tests run becomes a useful option in case of intrusive tests. The option is set to true by default to preserve the existent behavior. It can be overridden by either the corresponding module option or by the corresponding config build option. Signed-off-by: Stanislav Kinsburskii <skinsburskii(a)linux.microsoft.com> --- include/kunit/test.h | 4 +++- lib/kunit/Kconfig | 12 ++++++++++++ lib/kunit/debugfs.c | 2 +- lib/kunit/executor.c | 18 +++++++++++++++++- lib/kunit/test.c | 6 ++++-- 5 files changed, 37 insertions(+), 5 deletions(-) diff --git a/include/kunit/test.h b/include/kunit/test.h index 34b71e42fb10..58dbab60f853 100644 --- a/include/kunit/test.h +++ b/include/kunit/test.h @@ -312,6 +312,7 @@ static inline void kunit_set_failure(struct kunit *test) } bool kunit_enabled(void); +bool kunit_autorun(void); const char *kunit_action(void); const char *kunit_filter_glob(void); char *kunit_filter(void); @@ -334,7 +335,8 @@ kunit_filter_suites(const struct kunit_suite_set *suite_set, int *err); void kunit_free_suite_set(struct kunit_suite_set suite_set); -int __kunit_test_suites_init(struct kunit_suite * const * const suites, int num_suites); +int __kunit_test_suites_init(struct kunit_suite * const * const suites, int num_suites, + bool run_tests); void __kunit_test_suites_exit(struct kunit_suite **suites, int num_suites); diff --git a/lib/kunit/Kconfig b/lib/kunit/Kconfig index 34d7242d526d..a97897edd964 100644 --- a/lib/kunit/Kconfig +++ b/lib/kunit/Kconfig @@ -81,4 +81,16 @@ config KUNIT_DEFAULT_ENABLED In most cases this should be left as Y. Only if additional opt-in behavior is needed should this be set to N. +config KUNIT_AUTORUN_ENABLED + bool "Default value of kunit.autorun" + default y + help + Sets the default value of kunit.autorun. If set to N then KUnit + tests will not run after initialization unless kunit.autorun=1 is + passed to the kernel command line. The test can still be run manually + via debugfs interface. + + In most cases this should be left as Y. Only if additional opt-in + behavior is needed should this be set to N. + endif # KUNIT diff --git a/lib/kunit/debugfs.c b/lib/kunit/debugfs.c index d548750a325a..9df064f40d98 100644 --- a/lib/kunit/debugfs.c +++ b/lib/kunit/debugfs.c @@ -145,7 +145,7 @@ static ssize_t debugfs_run(struct file *file, struct inode *f_inode = file->f_inode; struct kunit_suite *suite = (struct kunit_suite *) f_inode->i_private; - __kunit_test_suites_init(&suite, 1); + __kunit_test_suites_init(&suite, 1, true); return count; } diff --git a/lib/kunit/executor.c b/lib/kunit/executor.c index 34b7b6833df3..340723571b0f 100644 --- a/lib/kunit/executor.c +++ b/lib/kunit/executor.c @@ -29,6 +29,22 @@ const char *kunit_action(void) return action_param; } +/* + * Run KUnit tests after initialization + */ +#ifdef CONFIG_KUNIT_AUTORUN_ENABLED +static bool autorun_param = true; +#else +static bool autorun_param; +#endif +module_param_named(autorun, autorun_param, bool, 0); +MODULE_PARM_DESC(autorun, "Run KUnit tests after initialization"); + +bool kunit_autorun(void) +{ + return autorun_param; +} + static char *filter_glob_param; static char *filter_param; static char *filter_action_param; @@ -266,7 +282,7 @@ void kunit_exec_run_tests(struct kunit_suite_set *suite_set, bool builtin) pr_info("1..%zu\n", num_suites); } - __kunit_test_suites_init(suite_set->start, num_suites); + __kunit_test_suites_init(suite_set->start, num_suites, kunit_autorun()); } void kunit_exec_list_tests(struct kunit_suite_set *suite_set, bool include_attr) diff --git a/lib/kunit/test.c b/lib/kunit/test.c index 089c832e3cdb..146d1b48a096 100644 --- a/lib/kunit/test.c +++ b/lib/kunit/test.c @@ -708,7 +708,8 @@ bool kunit_enabled(void) return enable_param; } -int __kunit_test_suites_init(struct kunit_suite * const * const suites, int num_suites) +int __kunit_test_suites_init(struct kunit_suite * const * const suites, int num_suites, + bool run_tests) { unsigned int i; @@ -731,7 +732,8 @@ int __kunit_test_suites_init(struct kunit_suite * const * const suites, int num_ for (i = 0; i < num_suites; i++) { kunit_init_suite(suites[i]); - kunit_run_tests(suites[i]); + if (run_tests) + kunit_run_tests(suites[i]); } static_branch_dec(&kunit_running);

12 months

selftests: core: unshare_test: WARNING: at mm/util.c:671 __kvmalloc_node_noprof

by Naresh Kamboju

The following kernel warning is noticed on all arch and all devices while running selftests: core: unshare_test on Linux next-20240823 and next-20240826. First seen on next-20240823. Good: next-20240822 BAD: next-20240823 and next-20240826 Reported-by: Linux Kernel Functional Testing <lkft(a)linaro.org> Crash log: -------- # selftests: core: unshare_test <4>[ 61.084149] ------------[ cut here ]------------ <4>[ 61.085175] WARNING: CPU: 0 PID: 477 at mm/util.c:671 __kvmalloc_node_noprof (mm/util.c:671 (discriminator 1)) <4>[ 61.088958] Modules linked in: crct10dif_ce sm3_ce sm3 sha3_ce sha512_ce sha512_arm64 drm fuse backlight dm_mod ip_tables x_tables <4>[ 61.093141] CPU: 0 UID: 0 PID: 477 Comm: unshare_test Not tainted 6.11.0-rc5-next-20240826 #1 <4>[ 61.094558] Hardware name: linux,dummy-virt (DT) <4>[ 61.096763] pstate: 23400009 (nzCv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) <4>[ 61.097841] pc : __kvmalloc_node_noprof (mm/util.c:671 (discriminator 1)) <4>[ 61.099701] lr : __kvmalloc_node_noprof (mm/util.c:661) <4>[ 61.100448] sp : ffff800080abbce0 <4>[ 61.100819] x29: ffff800080abbcf0 x28: fff0000004549280 x27: 0000000000000000 <4>[ 61.101744] x26: 0000000000000000 x25: 0000000000000000 x24: fff0000003615e40 <4>[ 61.102512] x23: fff0000003615ec0 x22: bfafa45863b285c8 x21: 0000000200002000 <4>[ 61.103232] x20: 00000000ffffffff x19: 0000000000400cc0 x18: 0000000000000000 <4>[ 61.104053] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 <4>[ 61.104927] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 <4>[ 61.105752] x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 <4>[ 61.106606] x8 : 0000000000000001 x7 : 0000000000000001 x6 : 0000000000000005 <4>[ 61.107377] x5 : 0000000000000000 x4 : fff0000004549280 x3 : 0000000000000000 <4>[ 61.108207] x2 : 0000000000000000 x1 : 000000007fffffff x0 : 0000000000000000 <4>[ 61.109262] Call trace: <4>[ 61.109619] __kvmalloc_node_noprof (mm/util.c:671 (discriminator 1)) <4>[ 61.110248] alloc_fdtable (fs/file.c:133) <4>[ 61.110751] expand_files (include/linux/atomic/atomic-arch-fallback.h:457 include/linux/atomic/atomic-instrumented.h:33 fs/file.c:177 fs/file.c:238) <4>[ 61.111171] ksys_dup3 (fs/file.c:1337) <4>[ 61.111596] __arm64_sys_dup3 (fs/file.c:1355) <4>[ 61.112006] invoke_syscall (arch/arm64/include/asm/current.h:19 arch/arm64/kernel/syscall.c:54) <4>[ 61.112480] el0_svc_common.constprop.0 (include/linux/thread_info.h:127 (discriminator 2) arch/arm64/kernel/syscall.c:140 (discriminator 2)) <4>[ 61.112955] do_el0_svc (arch/arm64/kernel/syscall.c:152) <4>[ 61.113384] el0_svc (arch/arm64/include/asm/irqflags.h:55 arch/arm64/include/asm/irqflags.h:76 arch/arm64/kernel/entry-common.c:165 arch/arm64/kernel/entry-common.c:178 arch/arm64/kernel/entry-common.c:713) <4>[ 61.113742] el0t_64_sync_handler (arch/arm64/kernel/entry-common.c:731) <4>[ 61.115181] el0t_64_sync (arch/arm64/kernel/entry.S:598) <4>[ 61.115709] ---[ end trace 0000000000000000 ]--- Crash Log links, -------- - https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20240826/te… Crash failed comparison: ---------- - https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20240826/te… metadata: ---- git describe: next-20240823 and next-20240826 git repo: https://gitlab.com/Linaro/lkft/mirrors/next/linux-next git sha: c79c85875f1af04040fe4492ed94ce37ad729c4d kernel config: https://storage.tuxsuite.com/public/linaro/lkft/builds/2l2pZRzhgRkPgXIKLJCI… artifact location: https://storage.tuxsuite.com/public/linaro/lkft/builds/2l2pZRzhgRkPgXIKLJCI… build url: https://storage.tuxsuite.com/public/linaro/lkft/builds/2l2pZRzhgRkPgXIKLJCI… toolchain: clang-18 and gcc-13 Steps to reproduce: --------- - https://tuxapi.tuxsuite.com/v1/groups/linaro/projects/lkft/tests/2l2paZVYTl… - https://tuxapi.tuxsuite.com/v1/groups/linaro/projects/lkft/tests/2l2paZVYTl… Please let me know if you need more information. -- Linaro LKFT https://lkft.linaro.org

12 months

[PATCH] landlock: ptrace_test: remove unused macros

by Ba Jing

After reviewing the code, it was found that these macros are never referenced in the code. Just remove them. Signed-off-by: Ba Jing <bajing(a)cmss.chinamobile.com> --- tools/testing/selftests/landlock/ptrace_test.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/tools/testing/selftests/landlock/ptrace_test.c b/tools/testing/selftests/landlock/ptrace_test.c index a19db4d0b3bd..8f31b673ff2d 100644 --- a/tools/testing/selftests/landlock/ptrace_test.c +++ b/tools/testing/selftests/landlock/ptrace_test.c @@ -22,8 +22,6 @@ /* Copied from security/yama/yama_lsm.c */ #define YAMA_SCOPE_DISABLED 0 #define YAMA_SCOPE_RELATIONAL 1 -#define YAMA_SCOPE_CAPABILITY 2 -#define YAMA_SCOPE_NO_ATTACH 3 static void create_domain(struct __test_metadata *const _metadata) { -- 2.33.0

12 months

[PATCH] KVM: selftests: Remove unneeded semicolon

by Chen Ni

Remove unnecessary semicolons reported by Coccinelle/coccicheck and the semantic patch at scripts/coccinelle/misc/semicolon.cocci. Signed-off-by: Chen Ni <nichen(a)iscas.ac.cn> --- tools/testing/selftests/kvm/access_tracking_perf_test.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/kvm/access_tracking_perf_test.c b/tools/testing/selftests/kvm/access_tracking_perf_test.c index 3c7defd34f56..447e619cf856 100644 --- a/tools/testing/selftests/kvm/access_tracking_perf_test.c +++ b/tools/testing/selftests/kvm/access_tracking_perf_test.c @@ -239,7 +239,7 @@ static void vcpu_thread_main(struct memstress_vcpu_args *vcpu_args) case ITERATION_MARK_IDLE: mark_vcpu_memory_idle(vm, vcpu_args); break; - }; + } vcpu_last_completed_iteration[vcpu_idx] = current_iteration; } -- 2.25.1

1 year

[PATCH v6 0/5] introduce PIDFD_SELF* sentinels

by Lorenzo Stoakes

If you wish to utilise a pidfd interface to refer to the current process or thread it is rather cumbersome, requiring something like: int pidfd = pidfd_open(getpid(), 0 or PIDFD_THREAD); ... close(pidfd); Or the equivalent call opening /proc/self. It is more convenient to use a sentinel value to indicate to an interface that accepts a pidfd that we simply wish to refer to the current process thread. This series introduces sentinels for this purposes which can be passed as the pidfd in this instance rather than having to establish a dummy fd for this purpose. It is useful to refer to both the current thread from the userland's perspective for which we use PIDFD_SELF, and the current process from the userland's perspective, for which we use PIDFD_SELF_PROCESS. There is unfortunately some confusion between the kernel and userland as to what constitutes a process - a thread from the userland perspective is a process in userland, and a userland process is a thread group (more specifically the thread group leader from the kernel perspective). We therefore alias things thusly: * PIDFD_SELF_THREAD aliased by PIDFD_SELF - use PIDTYPE_PID. * PIDFD_SELF_THREAD_GROUP alised by PIDFD_SELF_PROCESS - use PIDTYPE_TGID. In all of the kernel code we refer to PIDFD_SELF_THREAD and PIDFD_SELF_THREAD_GROUP. However we expect users to use PIDFD_SELF and PIDFD_SELF_PROCESS. This matters for cases where, for instance, a user unshare()'s FDs or does thread-specific signal handling and where the user would be hugely confused if the FDs referenced or signal processed referred to the thread group leader rather than the individual thread. We ensure that pidfd_send_signal() and pidfd_getfd() work correctly, and assert as much in selftests. All other interfaces except setns() will work implicitly with this new interface, however it doesn't make sense to test waitid(P_PIDFD, ...) as waiting on ourselves is a blocking operation. In the case of setns() we explicitly disallow use of PIDFD_SELF* as it doesn't make sense to obtain the namespaces of our own process, and it would require work to implement this functionality there that would be of no use. We also do not provide the ability to utilise PIDFD_SELF* in ordinary fd operations such as open() or poll(), as this would require extensive work and be of no real use. v6: * Avoid static inline in UAPI header as suggested by Pedro. * Place PIDFD_SELF values out of range of errors and any other sentinel as suggested by Pedro. v5: * Fixup self test dependencies on pidfd/pidfd.h. https://lore.kernel.org/linux-mm/cover.1729848252.git.lorenzo.stoakes@oracl… v4: * Avoid returning an fd in the __pidfd_get_pid() function as pointed out by Christian, instead simply always pin the pid and maintain fd scope in the helper alone. * Add wrapper header file in tools/include/linux to allow for import of UAPI pidfd.h header without encountering the collision between system fcntl.h and linux/fcntl.h as discussed with Shuah and John. * Fixup tests to import the UAPI pidfd.h header working around conflicts between system fcntl.h and linux/fcntl.h which the UAPI pidfd.h imports, as reported by Shuah. * Use an int for pidfd_is_self_sentinel() to avoid any dependency on stdbool.h in userland. https://lore.kernel.org/linux-mm/cover.1729198898.git.lorenzo.stoakes@oracl… v3: * Do not fput() an invalid fd as reported by kernel test bot. * Fix unintended churn from moving variable declaration. https://lore.kernel.org/linux-mm/cover.1729073310.git.lorenzo.stoakes@oracl… v2: * Fix tests as reported by Shuah. * Correct RFC version lore link. https://lore.kernel.org/linux-mm/cover.1728643714.git.lorenzo.stoakes@oracl… Non-RFC v1: * Removed RFC tag - there seems to be general consensus that this change is a good idea, but perhaps some debate to be had on implementation. It seems sensible then to move forward with the RFC flag removed. * Introduced PIDFD_SELF_THREAD, PIDFD_SELF_THREAD_GROUP and their aliases PIDFD_SELF and PIDFD_SELF_PROCESS respectively. * Updated testing accordingly. https://lore.kernel.org/linux-mm/cover.1728578231.git.lorenzo.stoakes@oracl… RFC version: https://lore.kernel.org/linux-mm/cover.1727644404.git.lorenzo.stoakes@oracl… Lorenzo Stoakes (5): pidfd: extend pidfd_get_pid() and de-duplicate pid lookup pidfd: add PIDFD_SELF_* sentinels to refer to own thread/process tools: testing: separate out wait_for_pid() into helper header selftests: pidfd: add pidfd.h UAPI wrapper selftests: pidfd: add tests for PIDFD_SELF_* include/linux/pid.h | 34 ++++- include/uapi/linux/pidfd.h | 10 ++ kernel/exit.c | 4 +- kernel/nsproxy.c | 1 + kernel/pid.c | 65 +++++--- kernel/signal.c | 29 +--- tools/include/linux/pidfd.h | 14 ++ tools/testing/selftests/cgroup/test_kill.c | 2 +- .../pid_namespace/regression_enomem.c | 2 +- tools/testing/selftests/pidfd/Makefile | 3 +- tools/testing/selftests/pidfd/pidfd.h | 28 +--- .../selftests/pidfd/pidfd_getfd_test.c | 141 ++++++++++++++++++ tools/testing/selftests/pidfd/pidfd_helpers.h | 39 +++++ .../selftests/pidfd/pidfd_setns_test.c | 11 ++ tools/testing/selftests/pidfd/pidfd_test.c | 76 ++++++++-- 15 files changed, 371 insertions(+), 88 deletions(-) create mode 100644 tools/include/linux/pidfd.h create mode 100644 tools/testing/selftests/pidfd/pidfd_helpers.h -- 2.47.0

1 year

← Newer
1
2
3
4
5
6
7
...
30
Older →

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror November 2024